Professional Documents
Culture Documents
SD PRICING
_____________________________________________________________________1 ketan_k202@yahoo.co.in
Transaction Codes Definitions The Condition Technique in Pricing Create Condition Table Create Access Sequence 1. Maintain Access Sequence 2. Optimize Access Sequence Create Condition Type 1. Maintain Condition Type 2. Define Upper/Lower limits for Conditions 3. Check Setting for Condition Types Setting
5 7 9 15 21 22 26 29 31 35 37
Condition Record 39 1. Maintain Condition Record 40 2. Maintain Scale for Condition 43 Main 3. Tracking Cumulative Value with Condition Update 47 Maximum Value 48 Maximum Quantity 50 Maximum Number of Sales Order 53 Pricing Procedure 56 1. 2. 3. 4. 5. 6. 7. Maintain Pricing Procedure Define Customer Pricing Procedure Define Document Pricing Procedure Assign Document Pricing Procedure to Order Type Assign Document Pricing Procedure to Billing Type Define Pricing Procedure Determination Define Check Setting for Pricing Procedure 59 62 64 67 68 69 71
_____________________________________________________________________2 ketan_k202@yahoo.co.in
Define Pricing by Item Categories Maintain Price- Relevant Master Data Field Price1. Define Price List Categories For Customer 2. Define Pricing Groups for Customer 3. Define Material Group Maintain Pricing Reports Condition Exclusion
1. Condition Exclusion for Groups Of Condition 2. Condition Exclusion for Condition Types and Records Pricing Agreements Define Promotion Set up Sales Deals
1. Define Sales Deals 110 2. Condition Type Group Condition Type Group Condition 114 Assign Condition Type/ Table Condition Type Group 116 Assign Condition Type Groups/Sales Deals 118 Questions & Answers 121
_____________________________________________________________________3 ketan_k202@yahoo.co.in
Pricing is on of the important topic of SD module. Once you understand this concept it is been easy for you to grip other SD topic. Go this topic twice and thrice until you are not clear with this concept. Read sap pdf file and Explain each fields of 1. Condition Type 2. Pricing Procedure Gone through the above files and you will have clear idea about pricing.
_____________________________________________________________________4 ketan_k202@yahoo.co.in
Transaction Code
V/03 V/04 V/05 V/06 V/07 V/08 VK11 VK12 VK13 OVKP OVKI OVKJ OVTP OVKK OVSI OVSL OVSJ OV31 Create Condition Table Change Condition Table Display Condition Table Create/Change & Display Condition Type Create/Change & Display Access Sequence Create/Change & Display Pricing Procedure Create Condition Record Change Condition Record Display Condition Record Define Customer Pricing Procedure Define Document Pricing Procedure Assign Document Pricing Procedure to Order Type Assign Document Pricing Procedure to Billing Type Define Pricing Procedure Determination Define Price List Categories For Customer Define Pricing Groups for Customer Define Material Group Define Condition Exclusion Groups
_____________________________________________________________________5 ketan_k202@yahoo.co.in
Assign Condition Type to Condition Exclusion group Maintain Condition Exclusion for Pricing Procedure Define Upper and Lower limit for condition Active pricing for item categories
_____________________________________________________________________6 ketan_k202@yahoo.co.in
Definition
Condition Table: A Condition table defines the combination of fields (the key) that identifies an individual condition record. Access Sequence: An access sequence is a search strategy used to find valid data for a particular condition type. Condition Type: It is price element and it has character like value, quantity, surcharge or discounts. Condition Record A condition record allows you to store and retrieve dada. All prices, discounts and surcharges for automatic pricing must be stored in condition records. Pricing Procedure: A pricing procedure is used to define a group of condition types in a particular sequence. It determines which subtotals appear during pricing. It determines witch bases the system uses to calculate percentage discounts and surcharges. It determines to what extent pricing can be influenced manually. Condition Exclusion: It is best/worst price comparison.
_____________________________________________________________________7 ketan_k202@yahoo.co.in
_____________________________________________________________________8 ketan_k202@yahoo.co.in
4
Condition record for ZPR0 No valid Record found Valid Record Found 1 pc = 40,000 INR
_____________________________________________________________________9 ketan_k202@yahoo.co.in
1. The system determines the pricing procedure according to information defined in the sales document type and the customer master record. 2. The pricing procedure defines the valid condition types and the sequence in which they appear in the sales order. In the example, the system takes the first condition type (ZPR0) in the pricing procedure and begins the search for a valid condition record. 3. Each condition type in the pricing procedure can have an access sequence assigned to it. In this case, the system uses access sequence PR00. The system checks the accesses until it finds a valid condition record. (Although you cannot see this in the diagram, each access specifies a particular condition table. The table provides the key with which the system searches for records). 4. In the example, the first access is unsuccessful. The system moves on to the next access and finds a valid record. 5. The system determines the price according to information stored in the condition record. Appropriate price. In the example, the system determines a price of 40,000 per piece. The system repeats this process for each condition type in the pricing procedure determines a final price.
_____________________________________________________________________10 ketan_k202@yahoo.co.in
Pricing
The following sections describe how pricing is controlled. Before you set up new control elements, you should check in how far the control elements defined in the standard version of the SAP R/3 system meet your requirements. The following aspects are of significance for controlling pricing
Condition type Using the condition types, you define which types of prices, discounts, and surcharges exist in the SAP system. The condition types which are pre-defined in the standard SAP delivery system include:
o
Condition table In the condition table, you specify the combination of fields for which you want to create a condition record. For example, you can create a condition record for a price which is dependent on:
o
_____________________________________________________________________11 ketan_k202@yahoo.co.in
Access sequence The access sequence is a search strategy with which the SAP system searches for valid condition records for each condition type during pricing. The access sequence refers to the fields which are relevant for pricing using the condition tables contained in the access sequence. Using the access sequence, you can control that the SAP system first of all searches for a customer-specific price and then for a price list price.
Pricing procedure In the pricing procedure you specify the condition types which are to be used in pricing. At the same time, you define the sequence in which the condition types are to be brought into play. Which pricing procedure is valid for a business transaction depends on the following criteria:
o
Pricing for a document item depends on its item category. You must make the appropriate settings for all item categories for which pricing should be carried out. Pricing is not activated, for example, for free of charge items. Also, check how the copying of pricing data is controlled in the SD documents ( document flow). For example, you specify in the document flow how prices are copied from sales order into a billing document.
_____________________________________________________________________12 ketan_k202@yahoo.co.in
In addition, you must define master data fields which are relevant for pricing. For example, you must specify a price group for a customer if you want to use this price group for pricing.
Define the degree of responsibility your employees have for conditions. If the cost price is to be determined during pricing, you must classify the item categories appropriately.
Note You define pricing for each sales area. You can use sales area assignment to apply the same pricing rules to more than one sales area. (see Section "Define common master data"). Transport interface In the transport, all objects which were maintained in Customizing for controlling pricing are transported. In the correction which is created for the transport, check the table entries and delete any entries which are not to be transported. Additional information You will find further information on this subject in the SD "Guide to Pricing and Conditions". Pricing Control The following steps describe how you should set up pricing control in the system. You should be familiar with the pricing criteria before making the necessary settings for pricing in the SAP System.
_____________________________________________________________________13 ketan_k202@yahoo.co.in
Check how prices as well as surcharges and discounts are created. For example, determine whether different prices apply to individual customers or customer groups and how surcharges and discounts are calculated. Check whether separate pricing is carried out for individual business transactions. You may levy specific freight surcharges for rush orders, for example. Specify at what point in time prices are determined (e.g. for sales promotions, price increases, etc.). Also clarify who is responsible for determining prices. Afterwards, adjust your pricing dependencies to the pricing criteria in the SAP System. To do this, see the following steps.
_____________________________________________________________________14 ketan_k202@yahoo.co.in
Enter the name of the table you want to create. Bear in mind that you can only choose names between 501 and 999. If you do not make a specification, the system automatically assigns a sequential number.
Specify whether you would like to create the table with or without a validity period. Enter a description for the condition table.
_____________________________________________________________________15 ketan_k202@yahoo.co.in
Select the required fields for the condition table from the list of the permitted fields listed in the field catalog. Generate the new condition table.
Note If, for example, you want to make pricing dependent on the ship-to party, you can only select the customer field in the condition table. You cannot specify the ship-to party in the condition tables since only customer master records exist. It is not until you create an order document that you have the specific function 'ship-to party'. When you subsequently define the access, you can assign the ship-to party source field to the customer field. 4. Specify the condition tables in the access sequences. This way, you establish the link between condition type, access sequence and condition record.
Note For information on entering fields in the tables KOMK, KOMG, and KOMP, see the System modification section. IMG PATH: Sales and Distribution Control Define Condition Tables T-Code: V/03 Basic Function Pricing Pricing
_____________________________________________________________________16 ketan_k202@yahoo.co.in
Click on
Enter the number between 501-999 and presses enter, you will have following screen.
_____________________________________________________________________17 ketan_k202@yahoo.co.in
Field Catalogs you can right side. You can select fields by double clicking on it an it will come on left side.
Click on
_____________________________________________________________________18 ketan_k202@yahoo.co.in
Click on
Click on
Your table has been saved. The order of the fields in a condition table affects the performance of the system during pricing. Two general guidelines will help you create an efficient condition table: 1. If you select fields that are connected to the structure of your organization (for example, sales organization and distribution channel),
_____________________________________________________________________19 ketan_k202@yahoo.co.in
assign the fields according to the level of general applicability: Put the most general field, for example, the sales organization in the highest position and the most specific field in the lowest. 2. After organizational fields, place fields from the document header before those that come from the item level. (For example, Customer comes before Material) After you have selected the fields for the key on the screen where you maintain and define condition tables, choose F16 Generate to generate the table in the system. Generation prepares the condition table for storing condition data.
_____________________________________________________________________20 ketan_k202@yahoo.co.in
If you define your own access sequences, the key should start with the letter Z since SAP reserves this letter for the standard system. Do not change access sequences contained in the standard SAP R/3 System.
Actions 1. Check to what extent you can use the access sequences contained in the standard SAP R/3 System. 2. Create new access sequences by copying a similar access sequence and changing it according to your needs. Specify an alphanumeric key which may have up to 4 digits and a textual description. 3. Maintain the accesses for the access sequence by specifying the condition tables in the desired sequence. With the sequence, you define the priority of the accesses. You can display combinations of key fields using possible entries. 4. Generating the accesses is no longer necessary as of 3.0, as this is carried out automatically. You can generate the accesses manually, if required, by choosing "Utilities".
_____________________________________________________________________21 ketan_k202@yahoo.co.in
_____________________________________________________________________22 ketan_k202@yahoo.co.in
This message serves to warn you that each change you make will have an effect on all other clients in the system. Click on you will have following screen
Click on
_____________________________________________________________________23 ketan_k202@yahoo.co.in
Enter four alphanumerical key and description for your Access Sequences and press enter
Select your Access Sequence by clicking on tab And double click on you will have following screen
Click on
1. Access Number: For finding you condition record you can assign access number to your condition table 2. Condition Table 3. Requirement Field: This is use for output determination 4. Exclusive: If you keep this tab tick mark your system spot searching record after first successful access condition type. Press enter you will have following screen
select your access as shown in above screen and double click on screen and then press enter you will have following
Click on you will have change request screen click on back to above screen Click on you will have following screen
you will
_____________________________________________________________________25 ketan_k202@yahoo.co.in
Optimize Accesses
To improve performance, you can optimize the accesses to a condition type by having the system carry out a pre-step: You use the pre-step to determine whether the system should first only search for condition records using the document header data. If the search is unsuccessful, then this access is not used to search from the individual items. The pre-step can only be used for accesses with header and item data. The greater the average number of items in a document, the more useful pre-step becomes. The less likely it is that you will find a valid condition record, the more useful it is to use pre-step (see the following example). Example In pricing, you use a customer-material discount. The condition records you create are based on customer data from the document header and
_____________________________________________________________________26 ketan_k202@yahoo.co.in
material data from each document item. The discount is only valid for 2% of your customers, however. Normally, this would mean that the system would needlessly search through every available item for 98% of your customers. In this case, pre-step would improve system performance. Double click on you will have following screen
Click on
Enter your condition type and your access number of your access sequence as shown in above screen
_____________________________________________________________________27 ketan_k202@yahoo.co.in
_____________________________________________________________________28 ketan_k202@yahoo.co.in
The pricing procedure groups all condition types together which the SAP system is to automatically take into account during pricing for a business transaction (see the section "Define and assign pricing procedures"). Remember that you can only specify manually in a document those condition types which are contained in the pricing procedure.
You can change the outcome of pricing in the sales document manually. You can limit options for changing a condition type in this IMG step.
Recommendation
If you define your own condition types, the key should start with the letter Z since SAP reserves these letters for that purpose in the standard system. Do not change the condition types which are contained in the standard SAP R/3 System.
_____________________________________________________________________29 ketan_k202@yahoo.co.in
Actions 1. Check to what extent you can use the condition types contained in the standard SAP R/3 System. 2. Create new condition types by copying a similar conditions type and changing it according to your requirements. One reason for creating a new condition type is you may require a calculation rule for a discount which is not available in the standard system. Specify an alphanumeric key which can have up to 4 digits, and a textual description. Specify an access sequence for the condition types. You do not need to specify an access sequence for header conditions. 3. Maintain the detail screen of the condition type. You can also assign a reference condition type if the condition types you are working with are similar. Then you will only have to maintain condition records for the reference condition type. In addition, you can define the upper and lower limits for the value of a condition at condition type level. This way, you limit the amounts or the scale values in the corresponding condition records. Checking settings You can use the SDCHECKT685A report to check the settings for the condition types. This is not a complete check but it does, for example, check the scale type setting for group conditions. For more information, read the report documentation. IMG PATH: Sales and Distribution Control Define Condition Type T-Code V/06 Basic Function Pricing Pricing
_____________________________________________________________________30 ketan_k202@yahoo.co.in
_____________________________________________________________________31 ketan_k202@yahoo.co.in
Select Condition Type PR00 Click on copy button and you will have following screen
_____________________________________________________________________32 ketan_k202@yahoo.co.in
Change the four alphanumerical key for your condition type and name.
_____________________________________________________________________33 ketan_k202@yahoo.co.in
your condition type was saved you will have your condition type in the list as shown in
Click on
_____________________________________________________________________34 ketan_k202@yahoo.co.in
Tick mark in Amount/percent radio button 2. For Condition Type Condition record must be maintain IMG PATH: Sales and Distribution Basic Function Pricing Condition Type Define upper/lower limits for conditions T-Code: OVB2 Define
_____________________________________________________________________35 ketan_k202@yahoo.co.in
Click on
Enter your data as shown in above screen. Click on Click on Click on you will have change request screen and you will back to above screen you will have following screen
_____________________________________________________________________36 ketan_k202@yahoo.co.in
_____________________________________________________________________37 ketan_k202@yahoo.co.in
_____________________________________________________________________38 ketan_k202@yahoo.co.in
Condition Record
Use This section explains how to perform day-to-day pricing activities during sales order processing. The section explains how to create and maintain pricing information by using condition records. Purpose of Condition Records Condition records allow you to store and retrieve pricing data in the system. All the pricing elements daily business - the prices, discounts, and surcharges for freight and taxes - that you want to use for automatic pricing must be stored in the system as condition records. You can define as many condition records as you want for the different pricing elements for any validity period. You create condition records for all the pricing elements that the system takes into account during automatic pricing. During document processing, the system transfers data from the condition records and determines the amounts for individual pricing elements (prices, discounts and surcharges) and the final amount for the sales document.
_____________________________________________________________________39 ketan_k202@yahoo.co.in
SAP MENU PATH: Logistics Sales and Distribution Master Data Conditions Select Using Condition Type Create T-Code: VK11 Double click on you will have following screen
_____________________________________________________________________40 ketan_k202@yahoo.co.in
Enter your condition type for which you want to create condition record Note: You can only create condition record for those conditions that has access sequence. Here I enter ZPR0 for which I want to create condition record
_____________________________________________________________________41 ketan_k202@yahoo.co.in
In above screen you can see key Combination pop-up screen appear. Here it appear because access sequence has more than one table Select key combination for which you want to create condition record.
And click on
_____________________________________________________________________42 ketan_k202@yahoo.co.in
Enter your Sales Organization, Distribution Channel, Customer, Material, Amount (Material Price), Unit (Currency), Per (Price per unit of measurement), UoM (unit of measurement) After entering necessary data press enter you will have following screen
As shown in above screen validation dates takes from your condition type. Press enter and Click on Click on you will back to above screen.
_____________________________________________________________________43 ketan_k202@yahoo.co.in
The scale basis is defined in Customizing for Sales for each condition type. Go to your condition record use T-Code: VK12
Enter Condition Type and press enter you will have following screen
_____________________________________________________________________44 ketan_k202@yahoo.co.in
Enter relevant data as shown in above screen and click on have following screen.
you will
_____________________________________________________________________45 ketan_k202@yahoo.co.in
Here our Scale Base type is Quantity enter data as shown in above screen. Press enter and click on you will have following screen
Click on
_____________________________________________________________________46 ketan_k202@yahoo.co.in
As shown in above screen for use of this function this tick mark must be there in condition type. Condition update provides the basis for the following pricing functions: _ Maximum Value _ Maximum quantity _ Maximum Number of Sales Orders
_____________________________________________________________________47 ketan_k202@yahoo.co.in
Maximum Values
Provided that the condition update function is active for a particular condition type, you can create condition records that specify a maximum cumulative value. The system uses the condition value of an item as the basis for the cumulative value. T-Code VK11
Enter your condition type and press enter you will have following screen
Now click on
_____________________________________________________________________48 ketan_k202@yahoo.co.in
Here we enter max. condition value 10,000. It is mean As the customer places sales orders for the item, the system keeps track of the cumulative discount value and stores this data at condition record level. Once the cumulative discount value reaches INR 10,000, the system automatically deactivates the discount.
_____________________________________________________________________49 ketan_k202@yahoo.co.in
Click on
After creating sales order you can track cumulative value for condition type
Maximum Quantities
You can create condition records that specify a maximum cumulative quantity. The system uses the condition base value of an item as the basis for the cumulative quantity. In most cases for the condition base, this involves a quantity. It is also possible to enter maximum quantities in weight and volume for a condition record. T-Code: VK11
_____________________________________________________________________50 ketan_k202@yahoo.co.in
_____________________________________________________________________51 ketan_k202@yahoo.co.in
Here we enter Max.cond.base value 200 pc Here, we specify that a customer receives a 50 INR discount for a 1219 (Children Bike) material up to a maximum cumulative order quantity of 200 peaces. As the customer places sales orders for the item, the system keeps track of the cumulative value (in this example, the number of peaces) and stores this data at the condition record level. Once the cumulative value reaches 200 peaces, the system automatically deactivates the discount. Click on you will have following screen
_____________________________________________________________________52 ketan_k202@yahoo.co.in
Click on
_____________________________________________________________________53 ketan_k202@yahoo.co.in
_____________________________________________________________________54 ketan_k202@yahoo.co.in
Here we enter Maximum Number of orders 2 Customer place for order for particular material system keep track for that order and when customer place order and reach maximum number of order than this condition is automatically deactivate. Note: You can only use one of the following at a time for condition type Maximum Condition Value Maximum Number of Orders Maximum Condition Base Value
_____________________________________________________________________55 ketan_k202@yahoo.co.in
In the pricing procedure, you define which condition types should be taken into account and in which sequence. During pricing, the SAP System automatically determines which pricing procedure is valid for a business transaction and it takes the condition types contained in it into account one after the other. The determination of the procedure depends on the following factors:
Customer determination procedure You specify the customer determination procedure in the customer master record for each sales area.
Document pricing procedure You specify the document pricing procedure for each sales document type and billing type.
To determine the procedure, you allocate the customer determination procedure and the document pricing procedure to a pricing procedure within a sales area.
_____________________________________________________________________56 ketan_k202@yahoo.co.in
SAP Recommendation
Define your own pricing procedures which contain only those condition types which you use. Otherwise, the system makes unnecessary accesses to conditions. Do not change the pricing procedures contained in the standard SAP R/3 System.
Specify a key with up to 6 characters and a description. For a procedure, specify the condition types in the sequence of their usage.
Maintain the lines of the pricing procedure 2. Afterwards define the customer determination procedures for determining the procedure. 3. Define the document pricing procedures for determining the procedure. 4. Assign the procedure to the sales document types and billing types. 5. To determine the procedure, define the allowed combinations of:
o
Sales area Customer determination procedure Document pricing procedure Pricing procedure
_____________________________________________________________________57 ketan_k202@yahoo.co.in
Check settings You can check the settings for your pricing procedures. This is not a complete check. It mainly checks the requirements and calculation formulas for standard condition types. Refer to the report documentation for more information. IMG PATH: Sales and Distribution Basic Function Control Define And Assign Pricing Procedures Pricing Pricing
_____________________________________________________________________58 ketan_k202@yahoo.co.in
Click on
2. Description for your pricing procedure. 3. Indicator whether your procedure is special pricing procedure e.g. inter-company or rebate pricing procedure. 4. Specifies how the system treats pricing data when copying documents. After entering data press enter select your pricing procedure and you will have following screen Click on
Click on
_____________________________________________________________________60 ketan_k202@yahoo.co.in
Here I show you one of my clients pricing procedure you can configure pricing procedure as per your requirement. You can read effect of each field of pricing procedure in Explain each field of SAP doc folder. Click on you will have change request screen click on back to above screen Click on you will have following screen you will
_____________________________________________________________________61 ketan_k202@yahoo.co.in
Here you Determines which pricing procedure the system should apply when you create a sales document for the customer. Use You can define different pricing procedures for your system. A pricing procedure determines the type and sequence of conditions that the system uses for pricing in, for example, a sales order. IMG PATH: Sales and Distribution Basic Function Pricing Pricing Control Define And Assign Pricing Procedures Define Customer Pricing Procedure T-Code: OVKP Double click on you will have following screen
_____________________________________________________________________62 ketan_k202@yahoo.co.in
Click on
Enter one character key and its description as shown in above screen. Click on you will have change request screen click on you will back to above screen Note: Do not forgot to assign your customer pricing procedure to your customer master record
_____________________________________________________________________63 ketan_k202@yahoo.co.in
Click on
Here you define the key that specifies the pricing procedure for this type of sales document. Use During pricing, the system determines the pricing procedure by taking into account
The sales area The pricing procedure key in the header of the sales document type The pricing procedure key in the customer master record
_____________________________________________________________________64 ketan_k202@yahoo.co.in
The pricing procedure determines how the system carries out pricing for a particular sales document (for example, which pricing condition records it accesses and in which sequence). IMG PATH: Sales and Distribution Basic Function Pricing Pricing Control Define And Assign Pricing Procedures Define document Pricing Procedure T-Code: OVKI Double click on screen you will have following
_____________________________________________________________________65 ketan_k202@yahoo.co.in
Click on
Enter one character key and its description as shown in above screen. you will have change request screen click on Click on back to above screen you will
Click on
_____________________________________________________________________66 ketan_k202@yahoo.co.in
As shown in above screen assign your document pricing procedure to your sales document type. you will have change request screen click on Click on back to above screen you will
_____________________________________________________________________67 ketan_k202@yahoo.co.in
Click on
_____________________________________________________________________68 ketan_k202@yahoo.co.in
As shown in above screen assign your document pricing procedure to your billing type. you will have change request screen click on Click on back to above screen Click on you will
Sales area Customer determination procedure Document pricing procedure Pricing procedure Pricing Pricing
IMG PATH: Sales and Distribution Basic Function Pricing Control Define And Assign Pricing Procedures Define Procedure Determination T-Code: OVKK
Double on
_____________________________________________________________________69 ketan_k202@yahoo.co.in
Click on
Enter you Sales Area, Document Pricing Procedure, Customer Pricing Procedure and Pricing Procedure as shown in above screen. you will have change request screen click on Click on back to above screen you will
Click on
_____________________________________________________________________70 ketan_k202@yahoo.co.in
You can check the settings for your pricing procedures. This is not a complete check. It mainly checks the requirements and calculation formulas for standard condition types. Refer to the report documentation for more information.
Double on
Click on
_____________________________________________________________________71 ketan_k202@yahoo.co.in
Pricing for each item category Here, you define the item categories for which pricing should be carried out and whether the item value should be taken into account when determining the total value of a sales document.
Pricing data when copying (document flow) Via the document flow, you define how the SAP System should handle the automatically determined and manually entered conditions when copying sales documents and billing documents. For example, you can define that only manual conditions are copied from the reference document into the target document or that the SAP System carries out pricing again in the target document.
Default settings In the standard SAP R/3 System, the condition type "VPRS" is predefined for determining the cost. Actions 1. Define for each item category whether the SAP System should carry out pricing. In addition, define whether the item value is used for statistical purposes or whether it should be included in determining the total value. 2. Define the type of pricing for the item categories when copying sales documents and billing documents. The copying options allowed for the item categories are defaulted automatically.
_____________________________________________________________________72 ketan_k202@yahoo.co.in
You define the copying options when defining the sales document types (see the section "Transactions" --> "Define document flow for transactions").
IMG PATH: Sales and Distribution Master Data Basic Functions Pricing Pricing Control Pricing Control Define Pricing By Item Category Click on you will have following screen
_____________________________________________________________________73 ketan_k202@yahoo.co.in
Here you can see your Item category is pricing relevant or not if not than must mark as pricing relevant. 1. Carry out pricing It indicates whether the system automatically carries out pricing at the item level. Example The system carries out pricing for standard items in a sales order. In the case of text items, however, pricing would not make sense.
_____________________________________________________________________74 ketan_k202@yahoo.co.in
2. Statistical values It indicates whether the system takes the value of an item into account when it determines the total value of a document. After making setting do not forgot to save.
_____________________________________________________________________75 ketan_k202@yahoo.co.in
you
will
have
It indicates whether, during pricing, the system determines the cost (stock value) of a sales document item. If you want to determine cost for your item categories than tick mark it. Do not forget to save.
_____________________________________________________________________76 ketan_k202@yahoo.co.in
_____________________________________________________________________77 ketan_k202@yahoo.co.in
Price list type in the customer master record for each sales area Price group in the customer master record for each sales area Material pricing group in the material master record for each sales organization and distribution channel
With these indicators, you can group customers or materials together for which the same conditions are to apply. Furthermore, you can make pricing dependent on all master data fields which are copied into the sales & distribution documents. For example, the following could be master data fields in the documents:
Actions 1. Check whether the master data fields are used for pricing in your company, and if so in what form. 2. Define your price list types. Specify an alphanumeric key with up to 2 characters and a description. 3. Define your price groups. Specify an alphanumeric key with up to 2 characters and a description.
_____________________________________________________________________78 ketan_k202@yahoo.co.in
4. Define your material pricing groups. Specify an alphanumeric key with up to 2 characters and a description. 5. Make sure that the indicators are entered in the customer master records and the material master records.
the kind of price list (for example, wholesale or retail) the currency in which the price appears the number of the price list type
You can use price list types to apply conditions during pricing or to generate statistics. Procedure In the customer master record, enter one of the values predefined for your system. The system proposes the value automatically during sales
_____________________________________________________________________79 ketan_k202@yahoo.co.in
order processing. You can change the value manually in the sales document header.
IMG PATH: Sales and Distribution Basic Function Pricing Maintain Price-Relevant Mater Data Fields Define price list categories for customers
Click on
Click on
_____________________________________________________________________80 ketan_k202@yahoo.co.in
Click on
Specify an alphanumeric key with up to 2 characters and a description Click on Click on you will have following screen
_____________________________________________________________________81 ketan_k202@yahoo.co.in
You can assign a price group to an individual customer either in the customer master record or in the sales document. Procedure The system can propose the price group from the customer master record. You can change the proposed value manually in the sales document at both header and item level.
IMG PATH: Sales and Distribution Basic Function Pricing Maintain Price-Relevant Mater Data Fields Define pricing groups for customers
Click on
_____________________________________________________________________82 ketan_k202@yahoo.co.in
Click on
Specify an alphanumeric key with up to 2 characters and a description. Click on Click on you will have following screen
_____________________________________________________________________83 ketan_k202@yahoo.co.in
A combination of customer and material pricing group A combination of price group and material group (for example, all wholesale customers and all non-food products)
IMG PATH: Sales and Distribution Basic Function Pricing Price-Relevant Mater Data Fields Define material groups Click on you will have following screen
Maintain
Click on
_____________________________________________________________________84 ketan_k202@yahoo.co.in
_____________________________________________________________________85 ketan_k202@yahoo.co.in
Click on
Click on
_____________________________________________________________________87 ketan_k202@yahoo.co.in
Click on
_____________________________________________________________________88 ketan_k202@yahoo.co.in
_____________________________________________________________________89 ketan_k202@yahoo.co.in
Select any one table for which you want to create pricing report click on you will have following screen
_____________________________________________________________________90 ketan_k202@yahoo.co.in
Make tick mark for all check box in default values for the selection screen Click on you will have following pop-up
_____________________________________________________________________91 ketan_k202@yahoo.co.in
Click on
Click on
_____________________________________________________________________92 ketan_k202@yahoo.co.in
Condition Exclusion
In this step, you can set up exclusion procedures for groups of conditions and for individual condition types or records.
Define condition exclusion groups Allocate condition types to the condition exclusion groups
_____________________________________________________________________93 ketan_k202@yahoo.co.in
Enter condition exclusion groups in the pricing procedure and specify a procedure for determining the condition types to be excluded
Actions 1. Create a condition exclusion group by entering an alphanumeric key with a maximum of four characters and a description. 2. Allocate the condition types to a condition exclusion group. A condition exclusion group can contain any number of condition types. 3. Enter the condition exclusion group in the pricing procedure that you use in pricing (Go to -> Exclusion groups ). Note the sequence (sequential number) in which the exclusion groups should be processed. You can use two exclusion groups for condition exclusion. In this case, you must choose the procedure "C" which determines the best price between two exclusion groups.
Click on
_____________________________________________________________________94 ketan_k202@yahoo.co.in
Click on
_____________________________________________________________________95 ketan_k202@yahoo.co.in
Create a condition exclusion group by entering an alphanumeric key with a maximum of four characters and a description. Click on you will have change request pop-up screen click on
Click on
_____________________________________________________________________96 ketan_k202@yahoo.co.in
_____________________________________________________________________97 ketan_k202@yahoo.co.in
Click on
Enter your exclusion group and assign your Discount condition type press enter. Click on you will have change request pop-up screen click on you will back to above screen Click on you will have following screen
_____________________________________________________________________98 ketan_k202@yahoo.co.in
_____________________________________________________________________99 ketan_k202@yahoo.co.in
Select you pricing procedure as shown in above screen click on you will have following screen
Click on
_____________________________________________________________________100 ketan_k202@yahoo.co.in
Here you maintain that, the procedure according to which the selection is carried out within or between the condition exclusion groups is defined in the pricing procedure. The following options are possible:
Selection of the most (least) favorable condition type within a condition exclusion group Selection of the most (least) favorable condition record of a condition type, if more valid condition records exist (for example, selection from different condition records of the condition type PR00) Selection of the most (least) favorable of two condition exclusion groups (in this case, all condition types of the two groups are cumulated and the totals are compared) Exclusion procedure: If a condition type in the first group exists in the document, all condition types in the second group are set to inactive.
Enter all relevant data as shown in above screen Click on you will have change request pop-up screen click on you will back to above screen Click on you will have IMG screen
_____________________________________________________________________101 ketan_k202@yahoo.co.in
Mark a condition type or an individual record in the condition type with a condition exclusion indicator, for example with 'X' for net price. For all discounts which you want to void when this net price is used, enter a routine for the pricing procedure in the requirements column. This routine reads the indicator and sets the condition to inactive when it is set to 'X'. The standard system includes requirement 2 which has a similar function.
_____________________________________________________________________102 ketan_k202@yahoo.co.in
Click on
Enter one character alphanumerical key and its description as shown in above screen
It indicates whether the system automatically excludes the discounts that are proposed during pricing. Use You can set this indicator in two ways:
For a particular condition record (the field appears on the Details screen)
_____________________________________________________________________103 ketan_k202@yahoo.co.in
For all records of a particular condition type (the field appears on the screen where you define the condition type)
Note If you set the indicator to exclude conditions, there are several things to consider:
The system will still take into account any condition supplements that are part of the condition record for the price (condition type PR00, for example) You can allow for exceptions where you want to include discounts in spite of the condition exclusion indicator (for a particular discount condition you can specify a requirement that applies the discount ONLY when the indicator is set)
Click on you will have change request pop-up screen click on you will back to above screen Click on you will have IMG screen
_____________________________________________________________________104 ketan_k202@yahoo.co.in
Pricing Agreements
You can group condition records together using agreements for the purpose of sales deals - comparable to rebate agreements. You can define agreement types for promotions and sales deals and specify different condition types and condition tables.
Define Promotions
A promotion is a marketing plan for a certain product line (for example, during the market launch). A promotion can be made up of several sales deals. In Customizing, you have the following options for controlling promotions:
Define promotion type Set up number ranges for promotions, if necessary The same number range is used for promotions as in rebate processing. If you want to use separate number ranges, make the appropriate setting.
Enter the overview screen displayed for the user to create master data
Note The same authorization object is used for promotions as for rebate processing (V_KONA_VKO). Actions 1. Enter a numeric key with a maximum of four digits and a description for the promotion type.
_____________________________________________________________________105 ketan_k202@yahoo.co.in
Agreement category "P" for promotion Validity period proposed as a default value Overview screen
3. If necessary, create new number ranges (internal or external). Transport You transport number range objects as follows: Choose Interval -> Transport in the accounting document Number Range screen. All intervals for the selected number range object are deleted in the target system first. After the import, only the intervals you export are present. The number statuses are imported with their values at the time of export. Dependent tables are not transported or converted.
Click on
_____________________________________________________________________106 ketan_k202@yahoo.co.in
Click on
_____________________________________________________________________107 ketan_k202@yahoo.co.in
_____________________________________________________________________108 ketan_k202@yahoo.co.in
Enter four character alphanumerical key for your and its description for your promotion type Press enter and Click on click on you will have change request Pop-Up screen
Click on
_____________________________________________________________________109 ketan_k202@yahoo.co.in
Click on agreements
for
number
ranges
for
Define agreement types for sales deals The agreement type indicates the type of the sales deal, for example, whether it refers to a product or product line. The standard system contains sales deal type 0020.
Define and allocate condition type groups A condition type group defines a group of condition types and condition tables which can be used together in the sales deal. Using the condition type group, it is possible to deal with individual products differently in a sales deal and, for example, to grant discounts specific to a customer or material.
_____________________________________________________________________110 ketan_k202@yahoo.co.in
1. Create an agreement type by specifying a numeric key with a maximum of four digits and a description for the agreement type. 2. Specify the different control data on the detail screen of the agreement type (for example, validity period as default value, overview screen). In the agreement hierarchy, specify whether an allocation to a promotion may, can or must be made. 3. 4. Note 5. Further down in the Pricing chapter in Overviews you can also select a certain overview for sales deals as the default screen for maintenance of master data. For example, you can define an overview that should only be displayed for maintaining payment conditions for certain condition records. IMG PATH: Sales and Distribution Basic Function Agreement Set up Sales Deal Define Sales Deals Pricing Pricing
Click on
_____________________________________________________________________111 ketan_k202@yahoo.co.in
Click on
_____________________________________________________________________112 ketan_k202@yahoo.co.in
Enter four character alphanumerical key and its description and Press Enter and Click on click on you will have change request Pop-Up screen
Click on
_____________________________________________________________________113 ketan_k202@yahoo.co.in
_____________________________________________________________________114 ketan_k202@yahoo.co.in
Click on
Click on
_____________________________________________________________________115 ketan_k202@yahoo.co.in
Enter four character alphanumerical key and description for your condition type group. Here you mention category type for condition whether it is sales deal or rebate.
Click on you will have change request Pop-Up screen click on you will have following screen
Click on
_____________________________________________________________________116 ketan_k202@yahoo.co.in
Click on
_____________________________________________________________________117 ketan_k202@yahoo.co.in
Click on
Assign your condition type/table to your condition type group press enter you will have change request Pop-Up screen click on Click on you will have following screen
Click on
IMG PATH: Sales and Distribution Agreement Set up Sales Deal Condition Type Groups/Sales Deals
_____________________________________________________________________118 ketan_k202@yahoo.co.in
Click on
_____________________________________________________________________119 ketan_k202@yahoo.co.in
Assign your condition type group to your promotion type as shown above screen press enter Click on you will have change request Pop-Up screen click on you will have following screen Click on you will have IMG screen
_____________________________________________________________________120 ketan_k202@yahoo.co.in
2. Name three areas/processes which use condition technique in SD? i. Material determination, Output determination, Account determination.
3. What are the four basic elements of condition technique? i. Condition Types, Condition Tables, Access Sequences, Pricing Procedures.
4. Please explain graphically the relationship between the four basic elements in condition techniques? i. Procedures Condition Types Access Sequence Condition Tables Condition Records.
5. Explain what a pricing procedure is? i. The primary job of a pricing procedure is to define a group of condition types in a particular sequence. The pricing procedure also determines: - Which sub-totals appear during pricing - To what extent pricing can be influenced manually - Which method the system uses to calculate percentage discounts and surcharges
_____________________________________________________________________121 ketan_k202@yahoo.co.in
- which requirements for a particular condition type must be fulfilled before the system takes the condition into account.
6. Explain what a condition table and an access sequence is and the relationship between them? i. A condition table defines the combination of fields (the key) that identifies an individual condition record. A condition record is how the system stores the specific condition data that you enter in the system as condition records. For example, when you enter the price for a product or a special discount for a good customer, you create individual condition records. ii. An access sequence is a search strategy that the system uses to find valid data for a particular condition type. It determines the sequence in which the system searches for data. The access sequence consists of one or more accesses. The sequence of the accesses establishes which condition records have priority over others. The accesses tell the system where to look first, second, and so on, until it finds a valid condition record. You specify an access sequence for each condition type for which you create condition records.
7. What is a condition type? What are the two main groups of condition types? i. A condition type is a representation in the system of some aspect of your daily pricing activities. For example, you can define a different condition type for each kind of price, discount, or surcharge that occurs in your business transactions. ii. Fixed Amount & Percentage.
_____________________________________________________________________122 ketan_k202@yahoo.co.in
9. What is a condition supplement and why would you use it? i. A condition supplement is a supplement for a particular condition type. For example, you can include a supplement every time you apply a material price. The supplement can contain various discounts. During pricing, the system automatically applies the discounts defined in the supplement every time it accesses a material price. You define for which condition types you want to use condition supplements in Customizing for Sales.
10. Which partner function is relevant when it comes to tax calculation in the sales order? i. Ship-to party.
11. Name at least three different condition types in pricing? i. Price, Discounts, Freight. PROO, K007, KF00.
12. You can create scales for prices and discounts. Name the four possible scale basis in R/3. i. Value, Quantity, Gross weight, Net weight, Volume.
13. Where would you specify that a condition type is a discount or a surcharge? i. In Condition Type Details Screen.
14. If somebody adds price elements manually in the sales order or if somebody changes a discount the system determined automatically, do you have a possibility to see that in the sales order? i. Yes.
_____________________________________________________________________123 ketan_k202@yahoo.co.in
15. You want to list all condition records for a certain material or a certain sales organization. How would you do that? i. By creating Pricing Reports. 16. Does the pricing procedure apply for the pricing data at item level or for the pricing data at header level? i. Both.
17. When you create a header condition manually in the sales order the system can copy the values in different ways to the items. Where would you specify how the system should process? i. Condition Type.
18. Which data do you have to maintain in SD so that the system can determine the sales taxes in the sales order automatically? i. Tax rate with or without Jurisdiction.
19. What does the condition exclusion indicator do for you? i. The system can exclude conditions so that they are not taken into account during pricing in sales documents.
20. Can you explain what a statistical condition is? Give an example for a statistical condition? i. VPRS.
21. For what do you use customer hierarchies? 21. i. Pricing , Rebate.
22. Can you track cumulative values in R/3? If yes, it could be based on
_____________________________________________________________________124 ketan_k202@yahoo.co.in
23. If you want to make sure that conditions records apply for a certain time period only what would you have to do? i. Validity Period to be specified in condition record.
24. What is a group condition? i. Condition which can be used to determine a scale value based on more than one item in a document. The system groups the items using either the condition key for the appropriate condition record or a separately defined condition key.
25. Name the influencing factors for pricing procedure determination during sales order entry? i. Customer, Sales Document Type and Sales Area.
26. Can you copy condition records? If yes, are there any restrictions? i. Yes. Field specific.
27. If you create a new condition type-do you also have to create a new condition table and a new access sequence? i. Yes.
28. Where can you specify that a condition is mandatory? i. In Pricing Procedure.
30. Do you have to create a condition record for taxes in the SD application? i. Yes.
32. What does a condition type do? It determines the category of a condition and how it is used 33. What is an access sequence? It is a search strategy defined for the sequence in which the system reads the condition records for a condition type 34. What is a condition table? It is a combination of fields, which form the key for a condition record 35. At what other stage of COM (Customer Order Management) can pricing be re-determined? At billing time 36. How many condition tables used for each access sequence? One or more 37. Condition records are always created using a ------------Specific key 38. Can new condition records be created w.r.f to existing records?
_____________________________________________________________________126 ketan_k202@yahoo.co.in
Yes 39. Which condition type override a price or order value at header level? Condition type HM00 40. Which condition type used to create a minimum price for a material? Condition type PMIN 41. What does VPRS condition type in pricing? It gives the standard cost of the material 42. What does commercial rounding mean in rounding rule of condition type? It will round up nearest to the digit 43. Which two condition types are used in determining the customer expected price? EDI1 and EDI2 44. What does a group condition allow user to do? Allows to group items together and give the correct discount or surcharge to the sum or add an item in the group
45. Header conditions have access sequences (T/F) False 46. You can distribute header conditions using different methods T\F True 47. The records are retrieved by access sequence (the search strategy) is general to specific T\F False 48. SKTO is the condition type is used to retrieve the sales tax rate T\F
_____________________________________________________________________127 ketan_k202@yahoo.co.in
False 49. One condition type can be maintained as header condition and item condition as well T\F True 50. Condition table is the link between condition type and access sequence (T\F) False 51. Please, explain condition records in pricing Condition record is the place where you maintain the specific vale for the particular condition table. And if that condition is met then the specific value maintained against that record would be pulled by the system The "condition record" is a area where the price or value is maintained for a particular condition. Simply the Condition Records are nothing but the data used by condition types to calculate pricing To put it more simply.... a condition record is nothing but the price of a product.
53. What is Cumulative in Condition Records? There is a field: - "condition update" during configuration for a condition type (at v/06).is tick mark than we can see sales order value in cumulative in condition record
54. Where are all condition types permitted.? All condition are permitted in Pricing Procedure (V\08)
_____________________________________________________________________128 ketan_k202@yahoo.co.in
55. One condition tables can be assigned to how many condition types? None, Condition Table is assigned to access sequence.
56. Which condition type override a price or order value at header 56 level? HM00
57. During automatic calculation of sales taxes than which factors takes into account by the system? During automatic calculation of sales taxes, the system takes following factors into account The business being transacted is domestic or foreign Tax classification of the customers (Ship to-party) Tax classification of material
58. What happens when you do not enter a value for a manual and mandatory condition type? The pricing procedure will reject the conditions in the sales order
59. IF you have 3 different access sequences for one condition record then what will you do? It is not possible
_____________________________________________________________________129 ketan_k202@yahoo.co.in
60. What happens in the access sequence when you put all the ticks in the exclusive field? When you put tick in exclusive field of all access sequences, in my opinion, it will try to get available data from the first. Only in case, data is not available, will it move on to the next one.
61. What is meant by condition technique: can we say it is the combination of condition types, access sequence and condition tables? Yes
62. Where do we can find pricing procedure indicator in sd ? Pricing procedure is where we maintain all Conditions (like PR00, K004, mwst, kp00, etc)
63. What is the importance of requirement field in access sequence? System will not go to access condition type system will reply through formula
64. How do you control entry possibility of condition values at order through condition type settings? You can maintain the in condition record maximum and minimum value for all conditions. That will help you control the entry in sales order.
65. What is the standard group condition routine in condition type, what is its importance? It will help you to calculate the basis for the scale value when a group condition occurs in pricing.
_____________________________________________________________________130 ketan_k202@yahoo.co.in
66. What are the customizing settings in pricing procedure for tax condition type? Check out the standard pricing procedure RVAA01 - MWST. 67. Condition tables in Pricing are used for storing . (fill in the blank) Condition record 68. Defining Access Sequences is an activity which is ..(fill in the blank) Cross-Client 69. Pricing Procedure is a group of ..(fill in the blank) Condition types 70. Can you explain condition technique used in SAP? It is a hierarchy of elements defining a data combination, which leads to certain actions. In pricing the condition technique refers to the method by which the system determines prices from information stored in condition records. In Sales and Distribution, the various elements used in the condition technique are set up and controlled in Customizing. During sales order processing, the system uses the condition technique to determine a variety of important pricing information. 71. Name four basic elements of condition technique Condition Types, Condition Tables, Access Sequences, Pricing Procedures. 72. Explain condition table and access sequence and the relationship between them. A condition table defines the combination of fields (the key) that identifies an individual condition record. A condition record is how the system stores the specific condition data that you enter in the system as condition records. For example, when you enter the price for a product or
_____________________________________________________________________131 ketan_k202@yahoo.co.in
a special discount for a good customer, you create individual condition records. An access sequence is a search strategy that the system uses to find valid data for a particular condition type. It determines the sequence in which the system searches for data. The access sequence consists of one or more accesses. The sequence of the accesses establishes which condition records have priority over others. The accesses tell the system where to look first, second, and so on, until it finds a valid condition record. You specify an access sequence for each condition type for which you create condition records. 73. What is a condition type? Which are the two main calculation types in condition types? A condition type is a representation in the system of some aspect of your daily pricing activities. For example, you can define a different condition type for each kind of price, discount, or surcharge that occurs in your business transactions. Fixed Amount & Percentage are two main calculation types used in most condition types. 74. You can create scales for prices and discounts. Name the four possible scales. A: Value, Quantity, Gross weight, Net weight, Volume. 75. What is a group condition? Condition, which can be used to determine a scale, value based on more than one item in a document. The system groups the items using either the condition key for the appropriate condition record or a separately defined condition key. 76. Where would you specify that a condition type is a discount or a surcharge? In Condition type definition screen.
_____________________________________________________________________132 ketan_k202@yahoo.co.in
77. Name two header condition types HB00 (Discount-value) and HD00 (Freight) 78. You want to list all condition records for a certain material or a certain sales organization. How would you do that? By usage or creation of pricing reports. 79. What is the function of condition exclusion indicator? The system can exclude conditions so that they are not taken into account during pricing in sales documents. 80. Can you explain what a statistical condition is? Give an example for a statistical condition? Statistical condition is used in pricing for reporting purpose; the amount in the condition is not passed on to accounting. Example of statistical condition type is VPRS Cost. 81. Where can you specify that a condition is mandatory? in Pricing Procedure. 82. Explain pricing procedure. The primary job of a pricing procedure is to define a group of condition types in a particular sequence. The pricing procedure also determines: - Sub-totals, which appear during pricing - To what extent pricing can be influenced manually - Method the system uses to calculate percentage discounts and surcharges. - Requirements for a particular condition type, which must be fulfilled before the system takes the condition into account. 83. Name the influencing factors for pricing procedure determination during sales order entry. Customer Pricing Procedure from Sold-to Party customer master record, Document Pricing Procedure from sales document type and Sales Area.
_____________________________________________________________________133 ketan_k202@yahoo.co.in
84. If you want to make sure that conditions records apply for a certain time period only, how it can be set? The Validity Period for particular condition type to be specified in condition record. 85. In pricing, header-level condition type does not have access sequence. True / False True. It does not need access sequence, as condition record is not required for header-level record 86. A condition record found by an access sequence can always be changed in the sales order pricing. True / False False, It can be changed depending on the settings in the definition of condition type, which allow change of condition in the sales order. 87. Can you post revenues of different types of materials to different G/L accounts? Yes. You can configure revenue account determination using material account assignment group, which is maintained in the material master 89. Which is the standard pricing procedure for US with tax jurisdiction code? RVCXUS 90. Do you have to create a condition record for taxes in the SD application? For determination of tax condition, condition records need to be maintained. Example - condition type UTXJ. 91. What is a condition type? A condition type is a representation in the system of some aspect of your daily pricing activities. For example, you can define a different condition type for each kind of price, discount, or surcharge that occurs in your business transactions.
_____________________________________________________________________134 ketan_k202@yahoo.co.in
92. What is the purpose of a condition record? Condition records allow you to store and retrieve pricing data in the system. All the pricing elements of your daily business like -Prices -Discounts -Surcharges for freight and taxes etc. that you want to use for automatic pricing must be stored in the system as condition records. 93. How many pricing screens are there in a sales document? There are to pricing screens in a sales document item pricing screen, which gives the details of the prices for a particular item Header pricing screen, which gives the sum total of all the prices applied to all the items and conditions, which are relevant for the whole document. NOTE: header conditions do not have access sequence 94. What happens if validity periods overlap? If validity periods overlap then the system automatically splits the validity period for the particular rates to be active 95. Set of condition types is termed as condition record. (T/F) False 96. What are the three ways one can mark a condition type in pricing procedure? This are the three way mark in the pricing procedure for defining condition types characteristic Manually Mandatory Statistic
_____________________________________________________________________135 ketan_k202@yahoo.co.in
SD Pricing ________________________________________________________________________
ketan_k202@yahoo.co.in 136