You are on page 1of 32

Spring 2013 Vol.

13 #2

Canadian Publications Mail Product Sales Agreement #40609642

.SPRING

Tony Easton shot the Cover photo of the Volvo Special, and the current photos for the article starting on page 21, thanks Tony!

21_ 6_ 8_ 10_
Performance in Motion

NASCAR returns to its roots (sorta)

Time to Scrap the Drive Clean Progam?

Intake Manifold 101

Your Source for Edelbrock, since 1964

The most Edelbrock Superchargers in-stock in Canada!

Call Toll Free:

1-877-471-6700
Queen St. E Rutherford Rd.

www.performanceimprovements.com
P.I. BARRIE
567 Silvercreek Parkway 519-821-6740

P.I. NEWMARKET

P.I. BRAMPTON
HWY. 410

P.I. GUELPH

Coming Soon!
Islington Ave. Kipling Ave.

Silvercreek Pkwy.

HWY. 400

12 Rutherford Rd. S 905-453-9901

422 Dunlop St. W 705-735-1274

Dunlop St. W

Woodlawn Rd. W

Clark Blvd.

Boul St Charles

Upper Ottawa

Upper Gage Ave

New Location
Stone Church Rd. E

Simcoe St. N

Advance Road Norseman St.

1487 Simcoe St. N 905-725-3533


Taunton Rd.

4909 Boul St Charles 514-626-1866

1515 Upper Ottawa 905-574-6940

HWY40

@PIspeedshops

facebook.com/pispeedshops

Boul St Jean

87 Advance Road 416-259-9656

P.I. TORONTO

P.I. HAMILTON
Lincoln Alexander Pkwy

P.I. OSHAWA

P.I. PIERREFONDS
Boul Pierrefonds

Publishers Note

2012
Performance in Motion Publications 87 Advance Road Toronto, ON M8Z 2S6 Phone: 416-259-3678 Fax: 416-259-6433 PUBLISHER Bob McJannett bmcj@sympatico.ca Phone: 416-259-3678 EDITOR Rob McJannett CONTRIBUTORS Thomas Anderson Bob A. Booey Jim Madigan Robert Michaelson Jeff Norwell Jover Papag Dave Thomas Leonard F. Slye Chuck Vranas
with Bonnie Staring as the Reluctant Passenger

COVER IMAGE Tony Easton PROOFREADER Spike The Machine LaVigne MOVING? Please let us know! E-mail both your old & new address to: moving@performanceimprovements.com Return undeliverables to: 87 Advance Road Toronto, ON M8Z 2S6
PUBLICATIONS MAIL AGREEMENT NO. PERFORMANCE IN MOTION is published a year: Spring, Early Summer, Late Summer, Winter. Circulation is 30,000+ (ISSN 40609642 five times Fall, and 1703-8421)

Copyright 2013 All rights reserved by Performance In Motion Publishing. Be good to the environment, recycle this magazine give it to your friends. The fine print: We respect your privacy, and do not sell our mailing list. All opinions are those of our writers, (the usual gang of idiots) most of whom have sniffed too many gas fumes to trust as far as you can throw. The information presented is via said gas sniffers from which there can be no responsibility by the Publishers as to legality, completeness and accuracy. If you enjoy our magazine, be sure to let us know! This magazine may not be reprinted without permission of Performance In Motion Publishing. (Were nice guys, just ask) Have you checked out our facebook
page yet? Jover is cranking out the cool links & pics: www.facebook.com/PIspeedshops!

seemed like the year of the Ministry of the Environment. Throughout the year, we heard tales of roadside inspections regarding the emission legality of specialty vehicles. Some of those tales were real and some imagined. However, the result was much turmoil within the enthusiast community. So much in fact, that Durham MPP John OToole created a petition asking the Ontario Legislature to amend current laws and exempt cars over 20 years old. Signatures are still being collected, and if you havent signed one, it is important that you do. There are copies at all Performance Improvement locations in Ontario, as well as many other enthusiast businesses; they will also be available at cruise nights when the season begins again. Unfortunately, McGintys proroguing of Parliament brought things to a standstill. However, now that they are back in session, things will start to move again. If you support MPP OToole, be sure to sign the petition, and if you are in his district, remember that he is on the car enthusiast side when it is time to vote. 2013 brings new problems. Effective January 1st, Drive Clean testing has taken on a new face. No longer are tailpipe emissions sniffed on vehicles newer than 1997. Instead, they are being tested by plugging into the OBD port on your vehicle. Unfortunately, this program has many bugs. See Blowing Smoke in this issue for full details. Complaints have been numerous, and Conestoga-Kitchener MPP Michael Harris, recognizing the futility in this program, has a petition to phase-out Drive Clean completely. Once again, it is important, if you agree, for you to sign his petition at www. scrapdriveclean.ca. When the legislature realizes that the voters are angry, they may pay attention. And again when the next election comes be sure you support those who have supported us within the hobby. Which brings me to the Specialty Vehicle Association of Ontario (SVAO). SVAO is the only province-wide association with the car enthusiasts problems and concerns as its first priority.

The SVAO mandate is:

to establish the demographics of the to guide the provincial and municipal


specialty vehicle community, governments in matters that impact or are of interest to the specialty vehicle community, to monitor all government initiatives that may impact upon the specialty vehicle community, to provide the specialty vehicle community with a forum for sharing information.

During 2012, they were able to hold sit-down meetings between their members and members of the Compliance Branch of the MOE. During these meetings, a number of points were clarified on the subject of emission compliance for specialty and hot rod vehicles. In addition, SVAO has been providing guidance about VIN number corrections, Historic Plate misuse, Ethanol levels in gas, the current Drive Clean fiasco and other concerns of the specialty vehicle community. There are a number of dedicated volunteers capably led by Chris Willans working behind the scenes with no recognition. Are you a member of SVAO? Any group is only effective if it has strong membership. With the number of enthusiasts in our province and the low cost of membership, their member list should be out the window. Well, it isnt. If you care about the car hobby I urge you to join SVAO right now. The cost is minimal and the result remarkable. Membership for an individual is $10, for a club its $25 and a business $50. Go to www.iwebhosting.ca/svao/ click on Join, print the form and send in your $10. IT IS IMPORTANT. Now its about time to get out those great cars and enjoy the ride. Hopefully, I will see you down the road.

Performance in Motion

_TECH_

Bringing the Stock Car back to


Story By: Bob McJannett Photos courtesy of NASCAR

NASCAR

In

2001, Dale Earnhart was killed when he slammed into the wall during the Daytona 500. This after the year previous when Kyle Pettys son Adam and former sprint car racer Kenny Irwin were killed crashing into the concrete wall at the New Hampshire track. This caused Nascars powers that be to mandate research to create safer cars. By 2007, they started bringing forward the Car of Tomorrow (CoT). They ran about half of the races that season and made the new car mandatory in 2008. Over the years since, there have been ongoing modifications to the car structure and appearance. Until by last year, 2012, all cars looked the same; the only way you could tell which manufacturer you were watching was by the lettering on the front. It was as if there were 43 jelly beans

racing around with exotic paint schemes and sponsor lettering. A far cry from Bill Frances original concept of racing stock cars that you would buy from a dealer and modify for the track. The fans didnt like these clones. How could you race on Sunday and buy on Monday if you could not identify the brand you were watching. Now the CoT has improved the safety of the driver. They strengthened the frames with the addition of a double frame rail, the cab is more spacious allowing more space around the driver, they also moved the driver farther inboard away from the inside framework. This allowed impact-absorbing material to be inserted in the doors. There are many other invisible changes that were made to protect the drivers. The biggest complaint from the fans remained the similarity between the cars.

Well, 2013 will see a return to Sprint Cup brand individuality. The Gen-6 cars will look more like the model they represent on the dealers floor. Chevrolet just announced their SS-based race car, while Ford will have a Fusion-based model and Toyota a Camry. If Chrysler hadnt pulled out of NASCAR this year, they would have fielded a Charger. Here are some shots of what the year will bring. It should be a great year and yeah! we will be able to recognize the Marques. Special thanks to Ford for providing the detailed photos explaining the changes they made to a stock Fusion. 2013 should be interesting.

Performance in Motion

_REVIEW

Five things every race fan should know about the NASCAR Sprint Cup Series Generation-6 car: Brand Identity: Nearly two years in the making, todays Sprint Cup cars more closely resemble those found on the showroom floor, with eyecatching bodylines and stylish features giving each model its distinctive appearance. Safety Enhancements: Additions of forward roof bar and center roof support bar to the roll cage reinforce integrity and increase the crush structure of the roof. Larger roof flaps improve liftoff numbers and decrease the likelihood of the car becoming airborne. Slim and Trim: Total weight of the car has been reduced by 160 pounds (100 less on right side; 60 pounds on left). Minimum weight of driver has also decreased from 200 to 180 pounds. Stamp of Approval: With exception of carbon fibre rear deck lid, all body panels are now produced by the manufacturer and individually stamped for verification. Your Name Here: Driver names will be featured on the upper portion of the windshield; sponsor decals and car numbers have been removed from headlight and taillight areas and now appear on front and rear bumpers; also, a single sponsor logo will be permitted on the roof of the cars.

Reminisce About Drag Strips Lost (and Found!)


In the early 50s and 60s, drag racing was exploding. Drag strips were opening at an unbelievable level. Races were held on virtually any straight paved surface all over the country. Lost Drag Strips looks back at many of those strips that have now become part of suburbia. Gone, but not forgotten. In 160 pages, author Tommy Lee Bird documents many of those lost racing surfaces and, in some instances, tells the stories behind their demise. Laced with both black-and-white and coloured photos from their hey days, this is a hard book to put down. The great, true stories behind some of the best-known and unknown old tracks in the country. Tracks include: Lions Associated Drag Strip, Orange County International Raceway, Riverside International Raceway, Bee Line Dragway, Motion Raceway, Motor City Dragway, Oswego Dragway, U.S. 30 Drag Strip, Dover Drag Strip, Pittsburgh International Dragway, Connecticut Dragway, Pocono Drag Lodge, and many, many more.

LOST DRAG STRIPS Tommy Lee Bird CT514 160 pages 299 images.
Performance in Motion

_Petition

Blowing Smoke
Story by Bob McJannett
s of January 1, 2013, the Ministry of the Environment has changed the method that Drive clean testing is done. No longer do you have to have your vehicle run up on a dyno and tailpipe emissions sniffed under simulated driving conditions. Unless, of course, you own a vehicle model years 88 to 97, where the old style test is still required. The new test , designed to decrease the amount of time it takes to complete, takes its information from the on-board diagnostic system. Here is the explanation taken from the government web site. The modernized Drive Clean program will provide significant benefits by: Providing a faster, more accurate emissions test; Identifying vehicles with emissions systems failures before they become gross polluters Identifying emissions systems problems for more effective repairs; Reducing more smog-causing pollutants from vehicle emissions; and Minimizing fraud.

One in every two cars fails new emissions test, mechanics say
However, the new tests have been plagued with problems. While the Government claims a 93% success rate, mechanics who send their customers cars for the test are seeing something different. The CBC reported that they were seeing a 50% failure rate. In one instance, a mechanic from the Ottawa area claimed seven out of ten cars he has had tested failed. Source CBC News Ottawa. Our local mechanic friend has had every car tested fail this week! Machine says Not Ready. This can be because the car had been boosted lately, had a dead battery, had had the codes scanned or ? Solution; after you pay your $35, let the car sit for eight hours and then drive it on the highway for two hours and in city traffic for two. This is supposed to reset everything, we hope. Since the first of the year, many newspapers have been reporting on the flaws in the new system. One of the suggested problems is winter weather, low temperatures prevent the correct operation of the evaporative system causing the on-board computer to fail the self test, kicking out a Not Ready report. Drive Clean realizes they have a problem and announced on February 7 that a conditional pass can be issued providing that:

At least 24 hours have passed be The vehicle has been driven at least The battery was not disconnected or
the OBD codes cleared within the last 30 km. The number of Not Ready reports has not increased. 30 km between the tests. tween the tests.

Meanwhile, there is no discussion of the amount of money being spent for these bogus tests. The consumer can spend between $52.50 and $87.50, yet there is no proof any of this is going to help the environment in any measurable way.

Performance in Motion

Ontarios Auditor General in his 2012 report questioned the continuing need for the program. Here is a small part of his report: The Ministry of the Environments Drive Clean vehicle emissions-testing program does ensure vehicles get properly tested, but the reduction in vehicle emissions in Ontario is due largely to factors other than the program, Auditor General Jim McCarter says in his 2012 Annual Report.

Drive Clean Impact On Emissions Decreasing, Auditor General Says


On-road vehicle emissions have declined so signicantly from 1998 to 2010 that they are no longer among the major domestic contributors of smog in Ontario. However, ministry emissions estimates show that more than 75% of the reduction in vehicle emissions since the programs inception is actually due to factors other than the Drive Clean program, such as tighter manufacturing standards on emission-control technologies, federal requirements for cleaner fuels and ongoing retirement of old vehicles. As the papers have been reporting, it certainly appears that Drive Clean has outlived its usefulness. The question is will the government be willing to give up this cash cow? Kitchener- Conestoga MPP Michael Harris, and Prince Edward-Hastings MPP Todd Smith are promoting a web site encouraging everyone to sign their petition to scrap Drive Clean that they will present to the legislature. Check out www.scrapdriveclean.ca for all the information. We recommend you print out the form and get all your friends to sign, they say hard copy gets more respect than internet petitions. Be sure to fi ll out all the spaces when signing since they will not accept signatures without a name and address. There is an election coming, sooner than later. Be sure you tell all the candidates about the problems car enthusiasts have been facing for the last couple of years, then vote for the ones who you feel have listened!

www.scrapdriveclean.ca
PC MPPs SMITH AND HARRIS VOW TO SCRAP DRIVE CLEAN The Liberals have refused to seriously address the costly technical flaws with their new computerized emissions test and have instead opted to force Ontarians to foot the bill, Prince Edward-Hastings MPP Todd Smith said, joined by his colleague PC Environment Critic Michael Harris. Whats truly unfortunate is that the Liberals gave no thought to the unwarranted financial hardship and stress these false fails would have on drivers and car dealers, who are required to get an emissions test every time they sell a vehicle no matter how old it is, Smith stated. I encourage Ontarians to voice their opposition to this government program by signing our online petition today at ScrapDriveClean.ca. Up until the Liberals introduced their new and technically flawed Drive Clean test this year, 95% of vehicles met the programs requirements. Such a high pass rate indicates that improvements in technology and fuel efficiency standards have rendered the Drive Clean program redundant. Thats why the Auditor General questioned the overall effectiveness of emissions testing in his report last year, Harris said. Instead of acknowledging advances in technology, the Liberal government forged ahead with their new emissions test in a cynical attempt to raise the failure rate and justify what has obviously become a useless program. Now less than two months after the introduction of this test the failure rate has more than doubled.

Its always something! - Gilda Radner

Performance in Motion

_TECH

The inside story behind Intake Manifold design 101


Story & Photos by Len Sly & Smitty Smith

Single Plane or Dual Plane?


Which one is right for my engine? Should I buy a single plane or a dual plane? To find out, we went to Smitty Smith, Edelbrocks Technical Sales Coordinator. Every manifold serves a different purpose, explained Smitty. For years we have heard single plane is for racing, while the dual plane versions are for street. As with most things, its not that simple. Dual or Single? Basically a dual plane intake has a divided plenum under the carburetor with a higher floor on one side and lower floor on the other. The dual plane design offers a wide power range starting at a lower RPM. Generally these are best for street use since you will not be running at wide open throttle often (at least you shouldnt be on the street). The two separate plenums feed individual intake runners that are very similar in size. These connect with every other cylinder in the firing order. Dual plane intakes receive an induction pulse every 180 degrees of crank rotation. Smitty noted these dual plane designs offer better balancing of the air from cylinder to

It

all started in the late 30s. Vic Edelbrock Sr. was running a So Cal repair garage and working on a 1932 Ford Roadster project to race on the dry lakes. He had installed a dual carb intake to increase the power, but felt it didnt fill the bill. He thought he had a better idea, and created the first Edelbrock manifold the Slingshot, a 180-degree design running two Stromberg 97s. Other racers took note of how fast Vics car was running and wanted to try one of these new intakes. By the time the War came Vic, had built about 100 Slingshots. With his success, a manufacturing business was born. Now almost 75 years later, the Edelbrock name is found on hundreds of high-quality performance parts, still Made with pride in the USA. Looking through a current Edelbrock catalogue at intake manifolds, you will find literally dozens of applications for almost any type of performance engine, with multiple models for the really popular ones. Example: there are 28 versions of single four intakes for both race and street listed for the popular small-block Chev engine. That is, before you add in the differing finishes, polished, powder coated, EnduraShine.

cylinder through the whole RPM range. The dual plane design sends induction pulses to one half of the carb (assuming a divided plenum) enhancing low air velocity creating more efficient low RPM booster function, this typically results in better low-end performance, smoother drivability and more importantly for a street engine, better fuel mileage. Single plane intake manifolds introduce the fuel/air mix into a large open plenum which feeds all eight cylinders. This design receives overlapping induction pulses every 90 degrees. At lower RPMs, your engine will feel a bit sluggish and to perform at peak efficiency the single plane design needs high port velocity. In order to quickly reach higher RPM ranges where this design shines, consideration should be given to higher numerical rear end ratios and depending on transmission type, a high stall torque converter or a more aggressive clutch release. So the single plane design is usually best for race applications. Seems simple so far, but wait, theres more.

10

Performance in Motion

Dual-plane manifold with separate plenums that feed four cylinders each. A defining characteristic of a dual-plane is the divided plenum layout, separating the manifold into two units, with a high and low plenum bisecting the intake. The corresponding runners branch out to alternating cylinders in the firing order, essentially isolating induction pulses by half the natural frequency, from 90 to 180 degrees.

Dual-plane manifolds improve torque for excellent throttle response, especially off-idle through the mid-range. They are ideal for passenger cars, Street Rods, trucks, 4x4s, tow vehicles and RVs.

If for example, you have decided to run more cubic inches by converting your small block to a 383 stroker motor, you may consider a single plane for the street. According to Smitty, the larger engine allows a wider operational range, the additional cubic inches provide more cylinder volume helping to dilute the air to fuel ratio providing a more forgiving lower RPM combination. Depending on the desired operational RPM range, some racers are using a dual plane configuration. In fact, some race series specify a dual plane intake as the spec piece. Some of the dual plane designs come with larger cross- sectional runners that allow the intake to run strongly into the 5,500 to 6,500 range. As a way to accommodate those racers desiring the dual plane design, Smitty explained that on certain models they will cut down the centre divider. The amount varies per model, but it is based on extensive dynamometer and flow testing to ensure maximum power in the range noted in the Edelbrock catalogue. Edelbrock also offers Air Gap intakes in both single and dual plane configurations.

These designs feature a separation of the runners from the intake base. By separating the runners from hot engine oil splashing on the intake base and providing cool air flow under the runners and plenum, the intake charge is denser and cooler, providing more power. Smitty is quick to point out there is far more to gaining the greatest useable power than simply changing the intake. The whole

that Edelbrocks R&D division has vetted for maximum horsepower. You can be sure that all the pieces will really fit together and provide the power you are looking for. Throughout all of their 74 years, Edelbrock has been the leader in testing their products. As well as time on the dyno and the flow bench, Edelbrocks parts are tested on the street under all types of circumstances. For years, Vic Edelbrock Jr has said,

For street use, a single-plane manifold works great on stroker motors. Smitty Smith
combination has to be taken into consideration. Camshaft, carburetor, ignition and exhaust all feature in achieving maximum power. As the leader in intake design, Edelbrock is a strong proponent of the complete power package. For most applications, they can provide proven performance with no guesswork. The power package is made up from dyno and flow tested components We promise you the quality performance you deserve or I wont put my name on it. PERIOD We have only touched the surface on this subject. To ensure you make the right choice, visit your nearest knowledgeable performance retailer and discuss exactly what you want to accomplish.

Single-plane manifold feeds all eight cylinders from a common plenum. With an open plenum and short direct runners conveying mixture from the carb to the intake ports, the single-plane intake configuration is the master of maximum airflow. High rpm, high flow and high-demand situations are where the engine can really use one.

Single-plane manifolds are used in drag racing, on oval tracks, and on NASCAR engines--anywhere that maximum horsepower and torque are needed to win races.
Performance in Motion

11

PERFORMER AIR-GAP & RPM AIR-GAP MANIFOLDS The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. RPM AirGap manifolds are modeled after Performer RPM intakes for high performance street power from 1500to-6500 rpm, and the Performer Air-Gap manifolds are ideal for street performance from idle-to-5500 rpm.

EDELBROCK MANIFOLD GUIDE SERIES PERFORMER SERIES


Sources: Smitty Smith Technical Sales Coordinator Edelbrock, LLC 2700 California Street Torrance, CA 90503 PH: 1-800-221-1666 X 2817

STYLE

RPM RANGE

DP LOW RISE IDLE TO 5,500 DP HIGH RISE 1,500 TO 6,500

PERFORMER RPM

PERFORMER AIR GAP DP HIGH RISE IDLE TO 5,500 TORKER II VICTOR SERIES SP LOW RISE 2,500 TO 6,500 SP HIGH RISE 3,500 TO 8,500

DP DUAL PLANE SP SINGLE PLANE


012 McJannett ad half 4c:09 McJannett ad 1/2 June 3/9/12 5:54 PM Page 1

PERFORMANCE PRODUCTS

We Make Your Performance Wiring Harness Installation Painless


Ease of installation was one of the key goals for our wiring products from the very beginning. Of course we specified the very highest quality Thermal Crosslinked Polyethylene wire stock too. Then we print each application the entire length of each color-coded wire. And most important, we do half the job for you by pre-terminating each wire into the main fuse block for optimum reliability. Painless is not just a name. Then we go further; We build-in a 70amp Maxi-Fuse to protect the entire circuit system, we use only the finest quality connectors, relays and switches, and we include a comprehensive instruction manual to guide you through to completion. Finally, we offer the only Lifetime Guarantee in the performance wiring business. We offer a wide variety of vehicle-specific applications for many popular American muscle cars and classic trucks. Plus we have universal harnesses in 8, 12 and 18 circuits for custom and race car applications.

See More In Our Catalog:


Fuel Injection Harnesses 4x4 and Race Harnesses Switch Control Panels CirKit Boss Fuse Blocks Relay Kits Connectors & Pigtails LS Engine Harnesses PowerStar Alternators PowerStar Starters Battery Cables Power Braid Wire Wrap Bulk TXL Wire

painlessperformance .com

Complete Catalog Online At:

Keep Your Classic All North American!

Together We Can Do It

PERFORMANCE PRODUCTS

Tech Line 800.42 3. 9696 , 2 5 01 Ludelle Street, For t Wo r t h , Texas 76105

12

Performance in Motion

HOT ROD PARTS, CLOTHING & MEMORABILIA

SO-CAL Lightweight Mechanic Jacket: This lightweight mechanic jacket has vintage-style chain stitching on the back and our old gear driven logo stitched on the front. Jacket is made from 100% brushed cotton twill with inside lining and pocket. Black only SC4000 S-3XL: $88.99 ea. Service Lightweight Mechanic Jacket: The back is chain-stitched with our SO-CAL Service design by Chris Froggett. SC4001 S-3XL: $88.99 ea.

Front Chest Logo

Everybody knows how tough SO-CAL jackets are with brass zipper, slash pockets and adjustable waistbands. Constructed of 65% Poly / 35% combed cotton you can wearem till ya blow the motor! Available in sizes: S, M, L, XL, XLT, 2XL, 2XLT All sizes: $116.99 Wolf Jacket SC4001W

Eisenhower Mechanics Jacket:

SC6010 Cam $19.95

SC6002 S/L Tank Script $24.95

Front Chest Logo on Mechanics Jackets

SC6000B SO-CAL Logo Black or Tan S/M, L/XL: $24.95 Flext

Hoodies
Front Print Only

Tankscript Sweatshirt SC7012S-XL: $37.99

Cam Logo Hoodie SC7003 Navy S-XL: $58.99

The SO-CAL vintage style hoodie sports a classic chain stitched logo on the back and a small script on the front left chest. The garment is pre-laundered for a pre-shrunk and ultra comfortable light weight feel. Black only. SC7009 M-2XL: $63.99

SO-CAL SPEEDSHOP EASTERN CANADA 1-877-471-6700

SC1005

SC1013

SC1040

Left Chest Print

Left Chest Print

Left Chest Print

Ts $24.99
Most
Lots of other Shirt Styles available!
SO-CAL Shirts are available from Small, all the way up to 2XL: and prices vary accordingly. Most S-L Ts are $24.99, 2XL-3XL $26.99; with Long Sleeves ranging from $38.99 to $41.99. Add the size to the end of the part number when ordering. Prices subject to change without notice.

SC1053

SC1035

SC1052

SC1049

SC1007

SC1018

SC7015

SC1043

SC1031

SC1020

SC7016

SC1032 SC1042 SC1014 SC1012

SC1509 JS Outlaw Truck T-shirt

SC7008 Long Sleeve Thermal S-2XL: $37.99 Front Print Only

SC6004 $19.95 Logo Long Beanie SC6005 $19.95 Logo Short Beanie

Shine Tattoo Long Sleeve Shirt - Double Sided with smaller design on front and larger on back SC1502 S-L: $22.99 2,3XL: $29.99 - $31.99

Long Sleeve Shirts

SO-CAL Oil Can Piston Thermal


SC7011: Double-sided Print Long Sleeve Black S-2XL: $37.95

Cam Long Sleeve Navy Text on Sleeves SC1036 $38.99 - $41.99

Tank Script - Double-sided SC1006 $29.99 - $31.99

Shine Bike Long Sleeve SC1506B $29.99 - $31.99

87 ADVANCE ROAD, TORONTO, ONTARIO 1-877-471-6700

The SO-CAL Step-Boxed 32 Frame


Buggy Spring Rear

All SO-CAL Step-Boxed 32 frames use American Stamping rails for strength and authenticity. All frames are numbered and tagged for added value and include the following: The strength of an unground llet weld on the boxing plates. Recessed boxing plates which increase clearance for: Brake lines A. Fuel lines Power cables Exhaust systems Steering components A swept C in the rear which minimizes the stress of the cut and spreads the load over a greater area. A universal trans mount that cleverly accommodates TH350, TH400, 700R4 transmissions, as well as 4- or 5-speed manuals. Front cross member angled at 7 degrees for correct caster. Brake proportioning valve mounting pad In-line fuel lter mounting pad Rear cross member Steering box mount B. Front panhard bracket Front brake line tabs Master cylinder bracket Rear radius rod tabs Brake pedal mount Hiboy front cross member 1 forward F1-style Front shock upper mounting tubes (threaded) Rear shock upper mounting tubes

Coil-Over Rear

(A) SC70100 Pinched-nose hiboy base frame with buggy-spring rear suspension. $3,210. (B) SC70200 Pinched-nose hiboy base frame with coil-over rear suspension. $3,210.
SO-CAL Model A and A-V8 frames are also available. Call for more information.

Front Axles

A.

B.

Forged Steel Front Spindles:

C.

These forged 1045 heat treated steel spindles are a direct replacement for 37 to 41 Ford spindles. They come with center mounted grease ttings that clear bolt-on steering arms and are available in either plain or show chrome nish. SC60104 Forged steel spindles, plain: $259. pr. SC60106 Forged steel spindles, plain, bushed & reamed: $299. pr.

SO-CAL New Traditionalist Forged Steel I-beam Front Axle:

SO-CALs engineers rened a design that takes into account the idiosyncrasies of a reproduction part that must rst work with original Ford spindles. This new 4 dropped axle does that and more. The real test is trying to install stock spindles and having them go lock-to-lock. SO-CALs axle shows a 30% improvement over the competition in turning radius alone. So when it comes time to install reproduction parts, theres no problem. The axle measures 47 through the kingpin centers, 34 at the 2-1/4 inch thick spring perch boss and ts a 29-1/4 spring. (A) SC70503 Forged axle plain: $349. ea. (B) SC70505 Forged axle plain, drilled: $499. ea. (C) SC70503C Forged axle chrome plated: $679. ea.

GT2 S/S Front Spindles:

These investment cast stainless steel spindles utilize a pressed-in 431 heat treated S/S spindle shaft and are a direct replacement for 37 to 41 Ford spindles. They come pin t with bronze kingpin bushings, S/S grease ttings and spindle nuts. They are only available polished. SC60101 S/S polished spindles: $599. pr.

SO-CAL SPEEDSHOP EASTERN CANADA 1-877-471-6700

Speedshocks

New Traditionalist Coil-Over Speedshocks


SO-CAL Coil-Over Speedshocks Manufactured in the USA to the highest standards in the industry, featuring: 6061 brushed alloy body. 10 position rebound adjustment. Black silicone wire springs. Adjustable pre-load collar nut. 9/16" piston shaft. Unique shock eye design. Urethane bushings. 10" closed, 13-1/2" extended.
Alloy Gas Filled Coil-Over SO-CAL Speedshocks
Manufactured to the highest standards in the industry, these brush nished 6061 aluminum coil-over shocks have a ten position rebound adjustment, black powdered coated Silicon wire springs (offered in 220lb., 250lb., 300lb. and 350lb. increments) and a collar nut for quick pre-load changes. There is a 9/16" piston shaft for added strength, urethane bushings and the unparalleled design of the upper and lower shock eyes. SC60646220 SC60646250 SC60646300 SC60646350 Rear Rear Rear Rear Speedshocks Speedshocks Speedshocks Speedshocks 220lb: 250lb: 300lb: 350lb: $499. $499. $499. $499. pr. pr. pr. pr.

Stainless steel badge, polished. Measures 2-5/8 x 1.5. SC60663: $5.99 ea.

Cast metal badge. Measures 2-3/8 x .75. SC93038: $9.99 ea.

SC93036 SO-CAL Logo keychain: $8.99 ea.

More Parts Available

Crossmembers Hairpin Radius Rods Spring Perches Pitman Arms Steering Arms King Pin Kits Steering Stabilizer Shock Mounts Front Springs Shackles CoilOver Shock Mounts Ladder Bar Kits Column Drops Accessories & More!

New Traditionalist Speedshocks


A.

C.

Nitrogen Gas Filled Engineered for hot rods Fits all popular shock kits 90 Durometer Neoprene Bushings Comes in SO-CAL red or show chrome
(A) SC60680 Covered shocks painted, steel: $79. pr. (B) SC60683 Shorty covered shocks chrome: $133. pr. (C) SC60684 Shocks painted, steel: $69. pr. (D) SC60687 Shorty shocks chrome, steel: $123. pr.

B.

D.

Speedshocks in Steel: These nitrogen lled gas shocks are engineered specically for hot rod applications and offered in the Standard length of 9-1/4 closed x 14-1/4 extended or in the Shorty length of 7-7/8 closed x 11-1/4 extended. They are manufactured with or without dustcovers and can be run on the front or rear end of the car in either conguration. The distinctive design of the dustcover is reminiscent of the airplane shocks used on early hot rods during the 40s and 50s. Other features are 90 durometer replaceable 5/8 ID lower and 7/16 ID upper neoprene rubber bushings and they come nished in either high gloss SO-CAL red or show chrome.

87 ADVANCE ROAD, TORONTO, ONTARIO 1-877-471-6700

Accessories

C. B. D. E.

A. SO-CAL Switch Knobs:


(A) SC50405 Art Deco knob, polished: $18.99 ea. (B) SC50425 40 Style knob, polished: $18.99 ea.

B.

SO-CAL 40 Style GM Column Shift Dress-Up Kit: This polished kit replaces the knobs and levers on the popular GM steering column less the shift knob. SC62018 40 Style GM Dress-Up: $59. kit SO-CAL Speed Shop Electrical Switch Assemblies: Weve searched high and low to assemble a selection of electrical switches that meets our quality criteria and has the right aesthetics to complement our hot rods, customs, trucks, even VWs and motorcycles.

Keyless Ignition Switches

B. A.

C. D. E.

SC60753: $39.95 ea.

SC60762: $39.95 ea.

Wiper Switches

(A) Shift knob (B) Turn/tilt knob (C) Flasher knob (D) Turn signal lever and knob (E) Tilt lever and knob

SO-CAL Art Deco GM Column Shift Dress-Up Kit: SC62005 $79. kit

SC60750: $39.95 ea.

SC60760: $39.95 ea.

Horn Push Switches

SO-CAL Voodoo Shift Knobs:

Shift knobs come and go but these are the best I have ever seen. I dont know how theyre made and quite frankly dont care. Simply put I think its voodoo, just awless. Pete Chapouris Includes inserts, from $29.95. B. C.

SC60766: $39.95 ea.

SC60768: $39.95 ea.

2/Position Headlight Switches

SC60757: $49.95 ea.

SC60763: $49.95 ea.

A.

E.

Shift Knobs
H.

D.

3/Position Headlight Switches

F.

SC50467: $49.95 ea.

SC50470: $49.95 ea.

Off-On Switches

G.

I.

SC50447: $29.95 ea.

SC50448: $29.95 ea.

Headlight Parking Switch

(A) SC62007 Art Deco Standard $29.95 ea. (B) SC50420 Early Ford Standard $39.95 ea. (C) SC50600 3-Speed Art Deco $54.95 ea. (D) SC50601 4-Speed Art Deco $54.95 ea. (E) SC60619 SO-CAL Cue Ball $49.95 ea.

(F) SC60676 Black w/ inlaid Ivory $49.95 ea. (G) SC60622 SO-CAL Wolf Knob $49.95 ea. (H) SC60620 Jimmy Shine Knob $49.95 ea. (I) SC60621 Black SO-CAL Knob $49.95 ea.

Art Deco Ignition Switch:


SC60754: $49.95 ea.

Key operated ignition switch. SC60752 $39.95 ea.

SO-CAL SPEEDSHOP EASTERN CANADA 1-877-471-6700

Instruments

New Traditionalist Instruments

SO-CAL Speed Shop Instruments: The SO-CAL 5 gauge kit includes either a mechanical 3 3/8" 200mph or electric 140mph speedo. The auxiliary 2 1/16" gauges; electric oil pressure, electric water temp, electric fuel and volt meter all include the appropriate senders and hardware. They have black faces with a small SO-CAL logo, chrome bezels, steel cases and convex glass. All instruments are available separately including our new 10,000 RPM electric tach and electric 140mph speedo.

SC62650 SO-CAL 5 Gauge set, w/mechanical 200mph speedo: $299 set SC62663 SO-CAL 5 Gauge set, w/electric 140mph speedo: $399 set SC62655 SO-CAL 10,000 RPM Electric Tach: $144 ea.

SO-CAL Speed Shop Direct Mount Gauges:

We offer two types of direct mounts gauges; (A) water temperature 0-250 degrees and (B) fuel pressure 0-15 psi, 1 1/2" dia. The fuel gauge is 1/8" npt male direct mount and the temp gauge is 3/8" npt male direct mount. Both are anti-vibration liquid lled. (A) SC6265812 Water temp: $64.95 ea. (B) SC62657 Fuel pressure: $49.95 ea.

A.

B.

Actual Size Shown

A.

B.

SO-CAL Instrument Panels: Designed in the style of luxury cars of the Thirties, each SO-CAL in-

h.

strument panel is individually sand cast and polished and comes with an engine-turned stainless steel fascia. The panels are available in two sizes: 16" wide (5-1/2" high) for mounting ve gauges, and 20" wide (5-3/4" high) for mounting six gauges. Auburn-style panel measures 18-1/2 wide by 8 high at the centre. Each panel is pre-machined to accept standard 2-1/16" gauges (often referred to as 2" gauges) and standard 3-3/8" speedometer and tachometer. Detailed installation instructions and hardware are included. Gauges and switches are not included. (A) SC60700 5-gauge panelstainless steel nish: $269. ea. (B) SC60710 6-gauge panelstainless steel nish: $279. ea. (C) SC62093 SO-CAL Auburn-style instrument panel - polished: $329. ea.

C.

87 ADVANCE ROAD, TORONTO, ONTARIO 1-877-471-6700

SO-CAL
SPEED SHOP

SO-CAL Speed Shop Eastern Canada 87 Advance Rd. Toronto, ON M8Z 2S6 Call Toll Free: 1-877-471-6700
This yer is just a taste of the hundreds of SO-CAL Speed Shop Products available!
While stocked at 87 Advance, they can be ordered through all Performance Improvements locations.

EASTERN

CANADA
Patches

Embroidered twill logo patches SC9001S: $5.99 ea. Small (3.5) SC9001L: $18.99 ea. Large (12)
B. A.

Vicious Aviator Patch: Felt base with embroidery and chainstitch. (10x10) SC9010: $29.95

Wolf Chenille Patch (9x11) SC9002: $27.99

D. C.

3 Diameter

Script Felt Patch: (5x3) SC9005: $11.99

Vicious Patch: Felt base with embroidery, chenille and chainstitch. (9x10) SC9009: $26.95

SO-CAL Nose Art Patches Set: Get them all!


Save a few bucks. SC9015: $27.99 (4) (A) SC9011 Vicious Aviator (B) SC9014 Speed & Power (C) SC9012 Daredevil (D) SC9013 Vicious Hot Rods

Complete Front End Packages

SO-CAL Shine Shift Knob: Cast from the very

part that Shine crafted for his bare nekid 34 pickup, this 7-pointed shift knob is great for all applications, even paperweight. Includes inserts. SC98023 Shine shift knob: $49.95 ea.

Nothing says hardcore hot rod more than a set of hairpin radius rods and a dropped I-beam axle. This is our most popular complete front end package. Clearly there are countless congurations and by using the components detailed in this catalog you (or with the help of our skilled sales staff) can put together just about any hot rod front end package imaginable. Note: Front end packages come unassembled. Call for pricing.

Note: All SO-CAL prices are subject to change without notice and prices do not include shipping, handling or sales tax.

.FEATURE.

TIME MACHINE

Whatever Happened to

Story by Bob McJannett Photos by Tony Easton History & Build Photos courtesy of Fraser Earle
About this time, they began to grow an interest in sports car racing. First, it was Don, with Fraser going along for the ride. Soon, they were both really interested in the cars that they were seeing at Harewood acres, Watkins Glen and other tracks in the north east. They began to ask how can they could participate in the races themselves. It was obvious that they were not in a position to own one of the elite sports cars of the day. Affording a Scarab, D Jag, Porsche 550 Spider or a Ferrari 412 was definitely out of the question. They began to focus on the home-built specials that were turning up at the track. They thought that one of those could be within their reach. So the hunt for parts began. One day in 1958, Don came across what was left of a Volvo PV444 that had been crashed at Watkins Glen. The car was being driven by the owners son and was virtually new before the accident. A deal was struck, $101 changed hands, and all the useable parts of the Volvo moved to Don Davys Dads barn in Vineland, Ontario. The design came from the fertile mind of Fraser Earle; he drew the pictures of the swoopy body that eventually became the Davy Volvo Special. Plans were drawn out in chalk on the barn floor, pieces were set approximately where they thought they should go and work was started fi lling in the missing spaces that would make a race car. Over 100 of 1 square tubing was used to create the space frame. The body was built in three sections, the front and rear clips were fiberglass, the center section, the cockpit, was built
Don Davy proudly squats beside his automotive creation, circa 1959

ow often do you wonder what happened to something you were involved with when you were young? In the case of car guys, it is usually, where is a certain car. If it was really something special, had a lot of meaning to you in your young life, you might even regret letting it go in the first place. Well, 54 years ago, 1959 to be exact, two friends built themselves that special car. These young men Don Davy, 19 and Fraser Earle, 18, were already dedicated hot rodders. This at a time when the hot rodder was looked down upon. You know the type, jeans and white T-shirts with the smokes wrapped in the sleeve, engineers boots etc. But what they really were was talented enthusiasts. Don was a body mans apprentice so he created his own custom. His ride was a customized 1949 Mercury, frenched headlights and all the other popular body modifications of the day. Meanwhile, Fraser was working on his 1940 Ford Coupe powered by a 1959 V8 engine.

22

Performance in Motion

The Davy Volvo racing at Cayuga. Don Davy is behind the wheel, while Fraser Earle (third from the Left) waits for his next turn - behind the safety wall!

from aluminum. Not just any aluminum, but aluminum scavenged from old free scrap sheets. Frasers description of the fiberglass portion of the construction is priceless. We created a mold using chicken wire and burlap over plywood. Then laid up the fiberglass, and ground off anything that didnt look like the sports car we had in mind. The body was completed at the Provincial Institute of Trades in Toronto where Don was completing his training. At this point, it should be pointed out that this was to be a budget project. Don Davy was a second-year apprentice body man earning 85 cents an hour; Fraser Earle had taken a year off from high school and was earning an enormous $30 a week. Needless to say, money was tight. To keep expenses at a minimum, they fueled their space heater with (free) seasoned peach pits. This is where their experience as real hot rodders came into play. To keep costs as low as possible, parts were scavenged from a 48 Studebaker, a 52 Morris Minor with a small amount of Jaguar parts thrown in the mix. In fact, the most expensive pieces Don purchased were a pair of Gabriel shocks. The rolling chassis was completed in about three months and driven around the

neighborhood with no exhaust, while the driver sat on a box. By the end of the year, the body was mounted and painted, ready to go to the first race. Along the way, the guys had been keeping their eyes on other local builders. In particular they were inspired by the cars that Bill Sadler was building in his St. Catherines shop.

(L-R) Don Davy, Murray Howard, and Fraser Earle

The Davy Volvo Special in front of the unheated Barn where it was born in 59.

Performance in Motion

23

Bill has since been inducted into the Canadian Motor sports Hall of Fame and is considered the preeminent Canadian builder of sports cars in this era. With the car completed, the first step was to license it and put some miles on it to see what bugs they would have to deal with. It was quick, but quirky, recalls Don. After a few miles, they took it to some local tracks to see what they had. Unfortunately, what they had was a lack of funds. It soon became apparent that racing, even with a home-built, was beyond their budget. In January 1962, an era ended, Don sold the car to the son of the gravel pit owner in Wiarton, who drove it on the street. The car sold for $1,000, the amount that Don had invested. It soon became nothing but a memory. Don moved to England where he worked for a year at Merlyn Colchester Racing Developments before returning to Canada. Fraser went into business and the Davy Volvo Special became simply a reminiscence of what might have been. Meanwhile, the new owner had a couple of accidents and finally parked it. They soon lost track of their baby. Fast-forward 30 years. Tired of listening to Dads stories of the good old days, Frasers son convinced him to find their old car and restore it. The search was on; luckily Don believed he knew where it was. It turned out the fellow who bought it put it away in a barn where it sat until Fraser located it and offered to buy it back from his widow. Time had not been kind to the Davy Volvo Special the body was pretty torn up and the engine and transmission had gone missing. But it was still their car and once found, Fraser determined that it would not be lost again. $400 changed hands and the remnants were moved to Frasers garage. Work began in earnest. The custom space frame had stood up fairly well, a couple of the mounting points needed repair and refitting, then it was repainted. Since the original B16 engine had gone missing, this time they installed a B18 1.8 litre Volvo engine, modified by Cesar at Mississauga Engines

Inside a barn in Wiarton rested the remains of The Davy Volvo Special. Badly damaged body, missing its engine and transmission, covered in straw and rust, it hibernated while awaiting its resurrection.

24

Performance in Motion

to produce 150hp.They had decided that this would not be a completely original restoration. This time they would add things that they would have liked to do originally, but at the time were beyond their means. It became a painstaking restoration that took five years to complete to the point seen in these pictures. This time there would be more people involved. Don Davy brought the original body back to perfection then they sent it out to have a mold taken from it. The new body would be much lighter than the first version. Unfortunately the first fibreglass expert messed it up, having created the new body with no mold release on the mold. It came apart in pieces. Finally the body was repaired to perfection by Arnold Galadhar who was also responsible for the paint. Brian Hunter put in many hours fabricating aluminum panels and aiding with the other mechanicals, including the magnificent hand-built headers. After assembly, the car was race prepped with the help of Tony Martini, Steve OConnell and Richard Sharpe. Fraser licensed it for the street and took it out for a few blasts in the neighborhood. Finally, it was ready to go to the track. Since completion in its current form, they have raced the car at Mosport, Watkins Glen, Pittsburg and Beaver Run in Michigan. Both Fraser and Don chose not to drive the car, instead putting it in the hands of the more experienced Brian Hunter, Steve OConnell or Richard Sharpe.

When asked what was best about the Davy Volvo Special 2.0 Fraser replied, The fact we have been afforded the luxury of reliving an important part of our youth, while making the car into a viable vintage race car. We hope to see it performing for years into the future. As with any project it remains ongoing. Fraser has located a B16 engine and a Judson supercharger that once completed will be installed. While this combination puts the car in an awkward class for vintage racing it can compete in a VSCCA hill-climb. Besides, we want to see how it runs with a supercharger. Proving no matter what the age you cannot take the hot rodder out of the man.

Before & After


Performance in Motion

25

The Special makes a triumphant lap around Watkins Glen with Richard Sharpe at the Wheel, and Fraser Earle riding shotgun. Below is Fraser parked in front of the very Barn where the Special came to life!

26

Performance in Motion

_REVIEW

Performance Directory

Modify your Second-Generation Camaro or Firebird


A lot has been written about the first generation of GMs popular Camaros and Firebirds. This book moves on to the second generation. Those cars built between 1970 and 1981. Compared to the first generation cars, these cars are more attractively priced and more available. Many of these were sparsely equipped vehicles with six-cylinder or small V-8 engines and are perfect candidates for a full pro-touring treatment. In 176 pages, Jeff Tann details many of the performance improving projects the owner can easily complete. Jeff covers everything from simple bolt-ons to complex chassis modifications. No matter if you want more power, improved braking or better handling, this book can help you make the right decision. Detailed step-by-step instructions are provided with full colour photos, so you can confidently tackle the biggest projects. These include: installing mini tubs, an aftermarket front subframe, a multi-link rear suspension, aftermarket brake kits, and performing a full LS swap. With these upgrades, performance increases by leaps and bounds. This book is an essential tool for all secondgeneration enthusiasts looking to modify their car.

CAMARO & FIREBIRD PERFORMANCE PROJECTS Je Tann SA237 176 pages 485 images

Performance in Motion

27

This one-of-a-kind Volvo is always a hit at Volvo gatherings. No Trailer Queen, the Special has been on the track at Pittsburgh, Mosport, Cayuga, Watkins Glen International, & Beaver Run in Michigan.

Performance Directory

Performance in Motion

29

Flooded Carb Potatoes smothered with butter and gravy. Fuel Injectors The IV bags they use in hospitals for patients who cant eat. Grease Gun The weapon used during a fry truck holdup.

Part Three!

Its that time of year again, when glimpses of the road bring new shocks, struts and, in some cases, leaf springs to mind. Potholes, however, are the least of a reluctant passengers worries. Why? I shouldnt have to spell it out for you. Have you noticed the way your drivers been acting lately? Gathering up parts and cleaning products in the basement or garage, hoping you wont bug him about going to the garden centre? Hes got Spring Fever. And no, its not the groovy kind of fever where John Travolta suddenly appears in a white suit, ready to hustlethis is Automotive Spring Fever. The kind that gets into a mans soul and wont stop until a vehicle is completely waxed. Dont get me wrong. There are worse things a driver could be excited about. Like Yeti hunting. But this is the time of year when our automotive knowledge is put to the test. So Ive taken the liberty, yet again, to provide you with the correct definitions* of random words and phrases overheard at PI and car shows to help you make an impression.

Automatic Choke What marriage counsellors try to prevent. Big End What some people see in three-way mirrors. Chrome Surround What Iron Man wears. Clay Bar A place where Clay Aiken sips mint juleps. Clutch Diaphragm What happens when you wear Spanx. Controller Box Where the guy with OCD sits during a game. Creeper A type of horror film that features a dodgy-looking man in a trench coat. Dash Vent What joggers with issues do. Dished Pistons Really fancy bedpans. Dome Light The shine reflecting off a bald spot. Exhaust Baffles When you start imaging things because youre so tired.

Park Assist A ranger who helps you when you get lost in the woods. Rad Fins What stoned surfers think they see in the waves. Side Air Bag An opinionated person who sits next to you. Squeegees A failed vocal trio from Argentina. Steering Column The part in the Leaning Tower of Pisa that went kaflooey. Tap Set A pair of shoes with metal bits on the bottom. Tie Rod End What happens in the last chapter to a guy named Rod in a 50 Shades-esque novel. Universal Joint A place where humans and aliens are welcome. Hey, I never said whether the impression youd make would be good or bad. I leave that up to you.

Enjoy the ride

About the Author: Bonnie Staring is a comedic triple-threat (writer, performer, coupon user), and she appreciates the road of life a lot more than she might let on. Bonnie has plans to master social media one day, right after she learns how to machine rotors. www.bonniestaring.com
* Please note that the words correct and definition may have been used incorrectly in this sentence.

30

Performance in Motion

You might also like