Professional Documents
Culture Documents
LC-37A37M
SERVICE MANUAL
No. S19W2LC37A37M
LC-37A37M
In the interests of user safety (required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used.
OUTLINE
This model is based on the LC-32A37M and partially modified. For the contents not covered in this Service Manual, accordingly, please refer to the LC-32A37M (SY8U6LC32A37M) Service Manual.
CONTENTS
OUTLINE AND DIFFERENCES FROM BASE MODEL OUTLINE................................................ .............i DIFFERENCES FROM BASE MODEL.. .............i SAFETY PRECAUTION IMPORTANT SERVICE SAFETY PRECAUTION ............................................... ............ii PRECAUTIONS FOR USING LEAD-FREE SOLDER ................................................ ........... iii CHAPTER 1. SPECIFICATIONS [1] SPECIFICATIONS ................................. ........ 1-1 CHAPTER 2. OPERATION MANUAL [1] OPERATION MANUAL .......................... ........ 2-1 CHAPTER 3. DIMENSIONS [1] DIMENSIONS ........................................ ........ 3-1 CHAPTER 4. REMOVING OF MAJOR PARTS [1] REMOVING OF MAJOR PARTS...................4-1 CHAPTER 5. OVERALL WIRING DIAGRAM [1] OVERALL WIRING DIAGRAM ......................5-1 CHAPTER 6. PRINTED WIRING BOARD [1] POWER UNIT................................................6-1 [2] INVERTER UNIT ...........................................6-4 CHAPTER 7. SCHEMATIC DIAGRAM [1] SCHEMATIC DIAGRAM ................................7-1 Parts Guide
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
This document has been published to be used for after sales service only. The contents are subject to change without notice.
LC-37A37M
OUTLINE
This model is based on the LC-32A37M and partially modified. For the contents not covered in this Service Manual, accordingly, please refer to the LC-32A37M (SY8U6LC32A37M) Service Manual.
LC-37A37M
LC37A37M
SAFETY PRECAUTION
IMPORTANT SERVICE SAFETY PRECAUTION
Service Manual
Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the servicing guidelines which follow:
WARNING
1. For continued safety, no modification of any circuit should be attempted. 2. Disconnect AC power before servicing.
Connect the resistor connection to all exposed metal parts having a return to the chassis (antenna, metal cabinet, screw heads, knobs and control shafts, escutcheon, etc.) and measure the AC voltage drop across the resistor. All checks must be repeated with the AC cord plug connection reversed. (If necessary, a non polarized adaptor plug must be used only for the purpose of completing these checks.) Any reading of 0.74 Vrms (this corresponds to 0.5 mA rms AC.) or more is excessive and indicates a potential shock hazard which must be corrected before returning the monitor to the owner.
DVM AC SCALE
1.5k ohm 10W
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
SAFETY NOTICE
Many electrical and mechanical parts in LCD color television have special safety-related characteristics. These characteristics are often not evident from visual inspection, nor can protection afforded by them be necessarily increased by using replacement components rated for higher voltage, wattage, etc. Replacement parts which have these special safety characteristics are identified in this manual; electrical components having such features are identified by " " and shaded areas in the Replacement Parts Lists and Schematic Diagrams. For continued protection, replacement parts must be identical to those used in the original circuit. The use of a substitute replacement parts which do not have the same safety characteristics as the factory recommended replacement parts shown in this service manual, may create shock, fire or other hazards. ///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
ii
LFa
Indicates lead-free solder of tin, silver and copper.
L F a/a
Indicates lead-free solder of tin, silver and copper.
Soldering
As the melting point of lead-free solder (Sn-Ag-Cu) is about 220 C which is higher than the conventional lead solder by 40 C, and as it has poor solder wettability, you may be apt to keep the soldering bit in contact with the PWB for extended period of time. However, Since the land may be peeled off or the maximum heat-resistance temperature of parts may be exceeded, remove the bit from the PWB as soon as you confirm the steady soldering condition. Lead-free solder contains more tin, and the end of the soldering bit may be easily corroded. Make sure to turn on and off the power of the bit as required. If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after every use of it. When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper.
Be careful when replacing parts with polarity indication on the PWB silk.
Lead-free wire solder for servicing Part No. ZHNDAi123250E ZHNDAi126500E ZHNDAi12801KE J J J Description 0.3mm 250g (1roll) 0.6mm 500g (1roll) 1.0mm 1kg (1roll) Code BL BK BM
iii
LC-37A37M
LC37A37M
CHAPTER 1. SPECIFICATIONS
[1] SPECIFICATIONS
Item LCD panel Resolution Video Colour System Model LC-37A37M
Service Manual
37" (940 mm) Advanced Super View & BLACK TFT LCD 1,049,088 pixels (1366 x 768) PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV TV-Standard PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1 NTSC: M Function Receiving VHF/UHF 42.75 - 866.25 MHz Channel CATV S1 - S41ch (including Hyperband) TV-Tuning System STEREO/BILINGUAL Viewing angles Audio amplifier Speakers Terminals Rear Antenna input INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 OUTPUT RS-232C OSD language Power Requirement Power Consumption Dimensions Weight without stand with stand without stand with stand Auto Preset 99 ch NICAM: B/G, I, D/K A2 stereo: B/G H : 176 V : 176 10W x 2 10 x 4 cm 2pcs UHF/VHF 75 DIN type HDMI (HDMI input) (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz) HDMI (HDMI input) (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz) AUDIO in, COMPONENT in (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz) AUDIO in, COMPONENT in (480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz, 1080I/60Hz) S-VIDEO in, VIDEO in, AUDIO in AUDIO out 9 pin D-sub male connector English/Simplified Chinese/Traditional Chinese/Arabic AC 110 - 240 V, 50/60 Hz 126 W (0.9 W Standby) 916 (W) x 595 (H) x 123 (D) mm 916 (W) x 660 (H) x 255 (D) mm 12.5 kg 14.5 kg 0C - 40C
INPUT 6 (PC input) 15 pin mini D-sub, AUDIO in (common use with INPUT 1) ( 3.5 mm jack)
Operating Temperature
As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
11
LC-37A37M
LC37A37M
Service Manual
TV (Front/Side)
TV/VIDEO button
POWER indicator
OPC sensor
TV (Rear)
Antenna input terminal RS-232C terminal INPUT 6 (PC) terminals
INPUT 5 terminals
OUTPUT terminals
AC INPUT terminal
21
LC-37A37M
2. REMOTE CONTROL UNIT
9 Colour (Red/Green/Yellow/Blue) TELETEXT mode: Select a page. 10 AV MODE Select an audio and video setting. 11 SLEEP Set the Sleep timer.
0hr.30min. Off 1hr.00min. 2hr.30min. 1hr.30min. 2hr.00min.
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18
12
13 19 14
20
15
16 1 2 3 4 5 6 7 POWER (STANDBY/ON) To switch the power on and off. DISPLAY Display the channel or input information. 09 Set the channel. TELETEXT mode: Set the page. (Flashback) Press to return to the previous selected channel or external input mode. WIDE Change the wide image mode. FREEZE Freeze a motion picture on the screen. / / / (Cursor) Select a desired item on the setting screen. ENTER Execute a command. EXIT Return to the default screen. 17 18 19 20
(Mute) Press Mutes sound. Press again Restores sound. Mute will be cancelled after 30 minutes. However, the TV will not suddenly output loud sound as the volume level will be set to 0 automatically. Increase the volume level by pressing VOL +. MPX Select the sound multiplex mode. VOL + /VOL Set the volume. ( + ) Increase the volume. ( - ) Decrease the volume. CH /C H TV input mode: Select the channel. TELETEXT mode: Select the page. ( ) Increase the channel number. ( ) Decrease the channel number. TV/VIDEO (INPUT SOURCE) Select an input source. PC Directly select the PC terminal. MENU Display the menu screen. RETURN MENU mode: Return to the previous menu screen. (TELETEXT) Select the TELETEXT mode. (all TV image, all TEXT image, TV/TEXT image) (Reveal hidden for TELETEXT) TELETEXT mode: Display hidden characters. (SUBTITLE for TELETEXT) To turn the subtitles on and off. (Hold) TELETEXT mode: Stop updating Teletext pages automatically. Press again to release the hold mode. (Subpage) Display the Teletext subpage directly. (Top/Bottom/Full) TELETEXT mode: Set the area of magnification.
2 3
Insert the stand base to the stand post on the bottom of the TV. ( ) Insert and tighten the 4 screws into the 4 holes on the bottom of the stand base. ( )
NOTE
Screw
Screw driver
22
LC-37A37M
LC37A37M
CHAPTER 3. DIMENSIONS
[1] DIMENSIONS
Service Manual
Unit: mm
390
916
74
123
200
660
819.6
380
65
460.8
255
31
200 88
595
LC-37A37M
Manual
Rear Cabinet
41
LC-37A37M
2. REMOVING OF CONNECTORS, SPEAKERS, STAND COVER ASSY AND STAND ASSY
1. Remove all the connectors from all the PWBs. 2. Remove 2 screws [1] and detach the Speaker-L and Speaker-R. 3. Remove the 2 screws [2], 4 screws [3] and detach the Stand Cover Assy. 4. Remove the 4 screws [4] and detach the Stand Assy.
Speaker-R
Speaker-L
1 1
3
Stand Cover Ass'y
3
Stand Ass'y
42
LC-37A37M
3. REMOVING OF PWB UNITS
1. Remove the 1 screw [1] and detach the R/C, LED PWB Unit. 2. Remove the 6 screws [2] and detach the MAIN PWB Unit. 3. Remove the 4 screws [3] and detach the POWER PWB Unit. 4. Remove the 4 screws [4] and detach the INVERTER PWB Unit. 5. Remove the 1 screw [5] and detach the KEY PWB Unit. 6. Remove the 2 screws [6] and detach the SW Bracket. 7. Remove the 4 screws [7] and detach the VESA Angle.
7
POWER PWB Unit
2
VESA Angle MAIN PWB Unit
6 1
43
LC-37A37M
4. REMOVING OF LCD PANEL UNIT
1. Remove the 4 screws [1] and detach the LCD Panel Unit from Front Cabinet.
Front Cabinet
44
LC-37A37M
LC37A37M
Service Manual
51
LC-37A37M
LC37A37M
Service Manual
10
11
12
13
14
15
16
17
18
19
20
21
61
LC-37A37M
10
11
12
13
14
15
16
17
18
19
20
21
62
LC-37A37M
1
TL7002
2
TL7003 TL7001 TL7004
D7234 R7202 R7205 R7204 R7203 R7201
3
TL7008 TL7005 TL7007
4
TL7006
5
TL7112 TL7108 TL7101 TL7111 TL7105
6 7 8
R7125 R7126 R7127
FB7105
TL7103
C7109
9
R7132 FB7107
Q7101
R7128
R7129
R7120
R7102 R7281 R7280 R7119 R7115 R7121 FB7101 D7109 D7107 R7116 R7118
R7111
C7106 D7103
C7102
R7103
D7105
10 11
R7252 R7253 R7254 R7255
Q7203
TL7202
63
12 13 14 15 16 17 18 19 20 21
TL7107
R7208
R7269
D7226
R7257 D7203 D7225 D7223
TL7201
Q7208 R7264 R7265 R7209
TL7106
TL7204
D7210 R7271 D7211 R7261 R7256 D7229 R7207 D7204 R7206
D7207
TL7203
Q7202
Q7201
R7251
RJ2
R7249
R7262 Q7207
R7222
C7229
Q7206
D7208 D7222
RJ1
LF1
R7225 C7214 R7228 D7219 R7227 R7224 R7259 C7219
TL7216
R7242
R7226 Q7209
R7266
Q7205
TL7217
D7231
R7240
TL7221
C7217 R7232 R7229 R7237 R7235 R7234 R7236 C7230 R7239 R7241
C7224 R7243
R7244
R7233 R7260
TL7205
TL7206
TL7213
TL7212
TL7222
R7273
TL7208
TL7211
TL7224
C7225
TL7220
Q7210
TL7207
TL7219
TL7214
LC-37A37M
10
11
12
13
14
15
16
17
18
19
20
21
64
LC-37A37M
1
C7905
CN7902 JA402 CN7904 JA401 CN7903
2
JA104 JA301 JA103 JA102 JA302 JA403
3
T7900 T7904 T7908 JA106 JA101
JA105 JA303
4
JA304 JA421
JA305 JA111 JA114 JA306
JA110
JA907 JA901
CN7302
CN7905
5
C7906
JA802
JA404 JA307
6
VR7700
JA108 JA405 JA309 JA308 JA902 JA107 JA803
C7909
7
F7700
JA420 JA205 JA204 JA203 JA202
CN7906
8
C7812 JA310 JA406
9
C7807 JA407 C7800 JA312
JA311
10 11
C7910
C7806 JA112
65
12 13 14 15 16 17 18 19 20 21
JA113
C7913
JA417
Q7809
JA408 JA409
CN7908
JA313
Q7807
JA410 JA411
RDA7800 JA314
Q7811
JA804 JA412 JA413 JA201
CN7909
C7914
JA419 JA315
Q7810
JA316
C7917
JA416
JA208 JA209
CN7910
C7918
LC-37A37M
10
11
12
13
14
15
16
17
18
19
20
21
66
TL7908
TL7930
D7900
TL7921
TL7901
Q7900
Q7901
TL7916
C7900
TL7938
TL7939
TL7922
R7901
C7723 R7745
Q7705
Q7700
Q7702
TL7920
C7941
C7920 R7908 C7921 R7900 D7925 R7924 D7926 R7949 R7911 R7948 R7917 R7912
Q7704
Q7701
TL7924
R7713 RJ4 RJ21 R7716 R7753 R7743 R7757 R7708 R7742 R7754 C7704 R7710 C7706 R7720 R7744 R7717 RJ18 R7711 R7751 RJ19 R7704 C7707 R7756 C7703 C7702 R7700 R7703 C7701
Q7707
Q7703
Q7706
TL7720
TL7706
D7701 R7715
TL7703
R7702 C7700
TL7801
TL7701
R7733 R7712 R7747 R7749 D7700 R7709 R7748 R7714 C7705 C7725 R7729 R7723
TL7704
TL7904
TL7931
R7771 R7770
IC7700
C7907 C7934 R7972 RJ12 R7732 C7718 R7731 R7766 R7740 R7765 C7717 C7716 C7721 R7741 R7725 R7718 C7711 R7724 R7721 RJ11 R7728 R7755 C7719
TL7909
C7724 R7750 R7746 C7726 C7712 C7714 R7734 R7769 R7730 C7715 R7768 R7738 C7713 C7722 R7737 C7720
C7727
TL7900
TL7932
C7901
Q7902
C7942 R7829
TL7925
R7800 RJ25
TL7800
D7932
TL7923
Q7808
TL7905
RJ24
Q7806
R7952 R7902 C7922 R7953 D7930 R7909 R7932 D7929 R7910 R7935 C7951 R7946 C7950 D7917 C7923 D7922 R7923 R7947 D7931 R7922
TL7940
Q7903
TL7941
TL7933
RJ7
TL7913 TL7911
Q7804
C7939 C7912 R7975 C7810 C7802 C7801 D7803 R7819 R7810 C7943 D7800 D7801 R7808 R7823
D7904
TL7902
TL7934
C7902
RJ3 R7950
R7928 R7904
TL7929
D7934 C7924 R7821 R7809 R7811 D7808 C7803 R7820 D7807 C7804 R7814 R7824 D7805 D7804 R7812 R7918 R7919 D7802
R7951
TL7942
R7936 D7933 R7944 C7947 C7949 RJ14 R7945 D7921 R7937 D7918 RJ1 D7936 R7961 R7905 C7925 R7914 R7960
Q7904
TL7943
TL7926
R7929
Q7905
D7935 R7913
TL7906
C7811
TL7935
D7905
TL7914
TL7912
D7906
TL7936
TL7903
C7944
R7938 D7919
TL7927
C7903
C7945
Q7906
TL7944
R7906 C7926 D7938 R7920 R7963 D7937 R7942 R7921 R7943 R7915 C7927 D7923 C7952 R7916 R7955 D7939 R7956 R7931 R7933 R7907 D7916 C7946 D7940 R7934
TL7945
Q7907
TL7928
TL7907
TL7937
LC-37A37M
TL7915
D7907
10
11
R7828
67
D7903
Q7801
TL7714
R7816
12
13
Q7802
TL7719
R7801
Q7800
RJ26
14
Q7805
Q7803
IC7900
R7707
TL7910
D7902
15
16
17
D7901
18
19
20
21
LC-37A37M
LC37A37M
Service Manual
71
LC-37A37M
2. POWER UNIT
AND SHADED COMPONENTS=SAFETY RELATED PARTS
J
10
11
12
13
14
15
16
17
18
19
20
21
72
LC-37A37M
3. INVERTER UNIT
AND SHADED COMPONENTS=SAFETY RELATED PARTS
J
10
11
12
13
14
15
16
17
18
19
20
21
73
LC-37A37M
74
PartsGuide
LC-37A37M
PARTS GUIDE
No. S19W2LC37A37M
LC-37A37M
Note: The reference numbers on the PWB are arranged in alphabetical order.
CONTENTS
[1] PRINTED WIRING BOARD ASSEMBLIES LCD UNIT [8] [3] [4] DUNTKF064FM02 (POWER UNIT) DUNTKF072FM01 (INVERTER UNIT) CABINET PARTS [9] PACKING PARTS (NOT REPLACEMENT ITEM) SERVICE JIG (USE FOR SERVICING) [6] [7] [2] LCD PANEL MODULE SUPPLIED ACCESSORIES
[5]
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
This document has been published to be used for after sales service only. The contents are subject to change without notice.
LC-37A37M
NO. PARTS CODE PRICE NEW RANK MARK
PART DELIVERY
DESCRIPTION
! !
! ! !
C7002 C7011 C7021 C7024 C7027 C7101 C7102 C7105 C7106 C7108 C7109 C7110 C7111 C7112 C7113 C7114 C7201 C7202 C7203 C7204 C7206 C7207 C7208 C7209 C7210 C7211 C7212 C7213 C7214 C7215 C7217 C7218 C7219 C7220 C7221 C7222 C7223 C7224 C7225 C7226 C7227 C7228 C7229 C7231 CN7001 CN7002 CN7003 CN7004 D7103 D7104 D7105 D7106 D7108 D7109 D7111 D7113 D7114 D7201 D7202 D7203 D7204 D7205 D7207 D7208 D7209 D7210 D7211 D7212 D7213 D7214 D7215 D7216
RC-FZA562WJZZ RC-KZA550WJZZ RC-FZA560WJZZ RC-KZA550WJZZ RC-KZA550WJZZ VCKYCY1CB224KY VCCCCY1HH122JY VCKYCY1HB104KY VCKYCY1HB471KY RC-FZA358WJZZ VCKYTV1HB102KY RC-KZA304WJZZ+ RC-KZA304WJZZ+ RC-EZB594WJZZ RC-EZB294WJZZ+ RC-FZA358WJZZ RC-EZB326WJZZ+ RC-EZB323WJZZ+ VCKYTV1EB474KY VCKYCY1EB104KY VCKYTV1HB103KY RC-EZB593WJZZ+ RC-KZA304WJZZ+ RC-EZB294WJZZ+ RC-FZA564WJZZ VCKYCY1HB102KY RC-KZA498WJZZ RC-KZA498WJZZ VCKYCY1EB104KY VCKYCY1HB104KY VCKYTV1EB104KY RC-KZA267WJZZ+ VCKYCY1EB104KY RC-EZA480WJZZ+ RC-EZB539WJZZ RC-EZA480WJZZ+ RC-EZB539WJZZ VCKYCY1HB104KY VCKYCY1EB104KY VCKYCY1HB104KY RC-EZB294WJZZ+ RC-EZA480WJZZ+ VCKYCY1HB102KY RC-KZA733WJZZY QEARPA210WJQZ+ QEARPA210WJQZ+ QEARPA210WJQZ+ QEARPA210WJQZ+ VHDMA111G++-1Y RH-DXA068WJZZS VHDMA111G++-1Y VHDLI114+++-1Y RH-EXA359WJZZY VHDRB160M40-1Y VHDS2V60+++-1 VHDFMY1036S-1 RH-EXA526WJZZY VHDD1NK60++-1Y VHDD1NK60++-1Y VHDMA111G++-1Y VHDMA111G++-1Y RH-EX0680GEZZY RH-EXA563WJZZY VHDMA111G++-1Y RH-EX0680GEZZY RH-DXA088WJZZY VHDD1FL20U/-1Y VHDSARS02++-1Y RH-FXA014WJZZ RH-FXA014WJZZ RH-FXA014WJZZ RH-EXA526WJZZY
AC AC AC AC AC AB AA AA AA AF AA AC AC AN AB AF AB AB AC AB AA AC AC AB AD AA AB AB AB AA AB AC AB AD AF AD AF AA AB AA AB AD AA AC AB AB AB AB AA AE AA AC AE AC AC AE AB AC AC AA AA AB AA AA AB AD AC AD AC AC AC AB
N N
N N N
J J J J J J J J J J J J J J J J J V J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J J
CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR 0.22 16V Ceramic 1200p 50V Ceramic 0.1 50V Ceramic 470p 50V Ceramic CAPACITOR 1000p 50V Ceramic CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR CAPACITOR 0.47 25V Ceramic 0.1 25V Ceramic 0.01 50V Ceramic CAPACITOR CAPACITOR CAPACITOR CAPACITOR 1000p 50V Ceramic CAPACITOR CAPACITOR 0.1 25V Ceramic 0.1 50V Ceramic 0.1 25V Ceramic CAPACITOR 0.1 25V Ceramic CAPACITOR CAPACITOR CAPACITOR CAPACITOR 0.1 50V Ceramic 0.1 25V Ceramic 0.1 50V Ceramic CAPACITOR CAPACITOR 1000p 50V Ceramic CAPACITOR GROUND-PART GROUND-PART GROUND-PART GROUND-PART MA2J1110GL D3SB60-7000 MA2J1110GL LI114 PTZTE2533B RB160M-40TR S2V60-5009F06 FMY-1036S MAZ8062GML D1NK60-5060 D1NK60-5060 MA2J1110GL MA2J1110GL MTZJT-7236B MAZ8200GML MA2J1110GL MTZJT-7236B D1FL40-5063 D1FL20U-5053 SARS02V1 TLP781F(D4-GRL,F) TLP781F(D4-GRL,F) TLP781F(D4-GRL,F) MAZ8062GML
LC-37A37M
NO. PARTS CODE PRICE NEW RANK MARK
PART DELIVERY
DESCRIPTION
N N N N N
! !
! !
N N
! !
LC-37A37M
NO. PARTS CODE PRICE NEW RANK MARK
PART DELIVERY
DESCRIPTION
N N
! ! ! !
LC-37A37M
NO. PARTS CODE PRICE NEW RANK MARK
PART DELIVERY
DESCRIPTION
N N N N N N N N N N N N N N N N N
N N N N N N N N
LC-37A37M
NO. PARTS CODE PRICE NEW RANK MARK
PART DELIVERY
DESCRIPTION
N N N N
LC-37A37M
NO. PARTS CODE PRICE NEW RANK MARK
PART DELIVERY
DESCRIPTION
LC-37A37M
NO. PARTS CODE PRICE NEW RANK MARK
PART DELIVERY
DESCRIPTION
! ! ! !
N N N N
LC-37A37M
1-5
1-3 2 26
1-2
2-1 22
27 8 4 27 15 17 27 31 27 5 27 33 27 16 3 11 18 25 19 12 13 28 28 28 13 25 3-4 28 5 27 27 30 2-4 2-5 2-3 2-5 2-3 2-6 2-6 2-7 2-7 2-7 2-7
23
2-2
32
26
LC-37A37M
NO. PARTS CODE PRICE NEW RANK MARK
PART DELIVERY
DESCRIPTION
10
LC-37A37M
19-19
19-12
19-9
19-16 19-15
19-10
19-20
NO.
PARTS CODE
PART DELIVERY
DESCRIPTION
11
LC-37A37M
Stand unit X5 X6
Operation manual
Stand base
Screws (x 4)
NO.
PARTS CODE
PART DELIVERY
DESCRIPTION
! ! !
N N N N N N N
12
LC-37A37M
S6 X3 X4 X1 X2 S4
S5
S4
S3 X5
S2 S2
S7 S1
NO.
PARTS CODE
PART DELIVERY
DESCRIPTION
13
LC-37A37M
COPYRIGHT
SHARP CORPORATION Mar. 2009 TQ2719-S SY. KY AV Systems Group CS Promotion Center Yaita, Tochigi, 329-2193, Japan