You are on page 1of 3

AST 70

SINGLE CARTRIDGE SEAL

The AST 70 is a simple-to-install, unitized cartridge mounted, balanced, multiple spring seal which requires no measuring for installation. The seal faces are protected from damage and contamination from dirt and foreign particles. The AST 70 is a simple-to-install, unitized cartridge mounted, balanced, multiple spring seal which requires no measuring for installation. The seal faces are protected from damage and contamination from dirt and foreign particles.

AST 80
DUAL CARTRIDGE SEAL

The AST 80 Seal is two seals packaged in one compact, unitized cartridge assembly for easy installation. It can be used in three ways: Double Seal: With barrier fluid pressure higher than product pressure, the AST 80 prevents leakage of toxic or hazardous fluids into the environment. The barrier fluid provides lubrication to seal gases and non-lubricating fluids. Tandem Seal: By using a buffer fluid with pressure lower than process, the AST 80 can reduce pressure differential across a single set of seal faces. Spare Seal: With unpressurized buffer fluid, the outboard seal of the AST 80 runs "at idle" as a standby seal. If the inboard seal fails, the outboard seal provides primary protection, eliminating unscheduled shutdown of batch processes.

AST 60
SINGLE INSIDE SEAL

This seal is known as the friend of the maintenance man and can be used where a highly reliable, anti-clog seal is required. Long life is assured with the cool running AST 60 Seal. The floating rotary seal face eliminates seal face distortion inherent to shrink fit seal designs. Since the springs are isolated from the pumpage, you may be able to reduce or eliminate flushing and product dilution. Rebuild kits are available so you can rebuild the AST 60 in your plant without tools. You control your seal repairs: no waiting for an exchange seal or cross-contamination from previous service. The AST 60 Seal is designed for use in Power Generation: Cooling water, slurries, boiler feed, recirculation Chemical Processing: Reagents, solvents, process streams, paints Food Processing: Starches, slurries Wastewater Treatment HVAC Systems Pulp and Paper Mills: Brines, solutions Steel Mills: Pollution control, cooling water

You might also like