Professional Documents
Culture Documents
MODULAR
07 / 12 / 2012
20 TYP.
12
2 1 10
11
1. W12 x 30 / W12 x 40 BMM Beam 2. W12 x 30 BGG Beam 3. HSS 8 x 8 x 5/8 Column 4. Modular Footings or Piles 5. Added Upper Level with Moment Connection 6. Added Upper Level with Gravity Connection 7. Cantilever 8. Cantilever T 9. T-Support 10. Anchor Support Beam 11. Pipe Support Beam 12. Equipment Platform
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
Double web angles with pre-installed bottom bolt safely captures end of connecting beam
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
LIMITATIONS
6
15
PINNED
20
Wind = 85 MPH Seismic: Cs 0.32 ConXR Connection Moment Capacity = 1,870 k-in ConXR Connection Shear Capacity = 134 kips Pipe Rack Longitudinal Span = 20 Moment Beams @ 15 Height Supporting Pipes @ 40 psf. Moment Beams @ 21 Height Supporting Cable Tray @ 20 psf. Response Modi cation Coef cent R = 3.5 (Ordinary MF) Overstrength Factor 0 = 3.0 De ection Ampli cation Factor Cd = 3.0 (OMF) Importance Factor I = 1.25 Soil Site Class = D
MOMENT CONNECTION
MOMENT CONNECTION
HSS 8X8X5/8
20
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
LIMITATIONS
6
15
FIXED
20
Wind = 150 MPH Seismic: Cs 0.43 ConXR Connection Moment Capacity = 1,870 k-in ConXR Connection Shear Capacity = 134 kips Pipe Rack Longitudinal Span = 20 Moment Beams @ 15 Height Supporting Pipes @ 40 psf. Moment Beams @ 21 Height Supporting Cable Tray @ 20 psf. Response Modi cation Coef cent R = 3.5 (Ordinary MF) Overstrength Factor 0 = 3.0 De ection Ampli cation Factor Cd = 3.0 (OMF) Importance Factor I = 1.25 Soil Site Class = D
MOMENT CONNECTION
MOMENT CONNECTION
HSS 8X8X5/8
20
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
LIMITATIONS
6
15
PINNED
20
Wind = 150 MPH Seismic: Cs 0.43 ConXR Connection Moment Capacity = 1,870 k-in ConXR Connection Shear Capacity = 134 kips Pipe Rack Longitudinal Span = 20 Moment Beams @ 15 Height Supporting Pipes @ 40 psf. Moment Beams @ 21 Height Supporting Cable Tray @ 20 psf. Response Modi cation Coef cent R = 3.5 (Ordinary MF) Overstrength Factor 0 = 3.0 De ection Ampli cation Factor Cd = 3.0 (OMF) Importance Factor I = 1.25 Soil Site Class = D
MOMENT CONNECTION
GRAVITY CONNECTION
MOMENT CONNECTION
BOX 8X8X1.0
20
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
LIMITATIONS
6
15
FIXED
20
Wind = 150 MPH Seismic: Cs 0.35 ConXR Connection Moment Capacity = 1,870 k-in ConXR Connection Shear Capacity = 134 kips Pipe Rack Longitudinal Span = 20 Moment Beams @ 15 Height Supporting Pipes @ 40 psf. Moment Beams @ 21 Height Supporting Cable Tray @ 20 psf. Response Modi cation Coef cent R = 3.5 (Ordinary MF) Overstrength Factor 0 = 3.0 De ection Ampli cation Factor Cd = 3.0 (OMF) Importance Factor I = 1.25 Soil Site Class = D
MOMENT CONNECTION
GRAVITY CONNECTION
MOMENT CONNECTION
BOX 8X8X1.0
20
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
LIMITATIONS
6
15
FIXED
20
Wind = 110 MPH Seismic: Cs 0.27 ConXR Connection Moment Capacity = 1,870 k-in ConXR Connection Shear Capacity = 134 kips Pipe Rack Longitudinal Span = 20 Moment Beams @ 15 Height Supporting Pipes @ 40 psf. Gravity Beams @ 21 Height Supporting Pipes @ 40 psf. Moment Beams @ 27 Height Supporting Cable Tray @ 20 psf. Gravity Beams @ 33 Height Supporting Cable Tray @ 20 psf. Response Modi cation Coef cent R = 3.5 (Ordinary MF) Overstrength Factor 0 = 3.0 De ection Ampli cation Factor Cd = 3.0 (OMF) Importance Factor I = 1.25 Soil Site Class = D
GRAVITY CONNECTION MOMENT CONNECTION
GRAVITY CONNECTION
MOMENT CONNECTION
HSS 8X8X5/8
20
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
Assembly Overview
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
Assembly Sequence
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
Deliver & Install Upper Level Pipe Spools & Cable Tray
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
SmartPlant3D PDMS
As the piping design progresses, there may be a change in the number of pipe support and anchor load support beams required on the structure. Using Navisworks, ConXtech and the piping designers store saved locations and redline changes directly in the 3D model. Clashes can also be automatically found and then resolved between the piping and structural steel.
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
The 3D model contains all of the profile, weight, piece mark, as well as grid and top of steel information. This allows ConXtechs field superintendents and project managers to easily plan shipping truck loads and the erection sequence of steel by simply picking the pieces in the 3D model. Isometric erection drawings and sorted erection order reports are then automatically generated from the 3D model.
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
T Support Assembly
Moment Beam
Column
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
20'-0 ZZ YY XX WW VV UU TT SS RR QQ PP OO NN MM LL KK JJ II HH GG FF EE DD AREA 05 BB 20'-0 AA Z Y X W V U T 21@20'-0=420'-0 AREA 03 28'-0 23'-5 9'-7 20'-0 S R 471'-5 41 19 N M L K J I H 20'-0 G F 12 11 13 14 15 16 E D C B 17 18 A 791'-5 B.5 30'-0 20'-0 20'-0 AREA 10 AREA 04 40.7 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 42 43 AREA 06 AREA 08 10@20'-0=200'-0 CC 14@20'-0=280'-0 25@20'-0=500'-0
AREA 01
990'-0
15@20'-0=300'-0
20'-0
8@20'-0=160'-0
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
9 10 7@20'-0=140'-0
AREA 02
LEAVOUT
B-4 B-3 B-4 W12 X30 B-4 W12 X30 B-4 W12 X30 B-3 W12 X30
B-6 W12X30 CFA1027 HSS8X8X 5/8 B-6 W12X30 B-6 W12X30 B-6 W12X30 B-6 W12X30
Area: 10 MARK AB2 AB3 B-1 B-3 B-4 B-5 B-6 B-7 C-1 C-2 C-3 C-4 CX01 CX02 QTY. 192 48 15 19 37 1 6 4 12 4 10 2 87 6 NAME ANCHOR ROD ANCHOR ROD BEAM-BMM BEAM-BGG BEAM-BMM BEAM-BMG BEAM-BME BEAM-BMM COLUMN-CG-20 COLUMN-CM-20 COLUMN-CM-24 COLUMN-CMI-24 OUTER COLLAR BW-B PROFILE ROD1" ROD1" W12X40 W12X30 W12X30 W12X30 W12X30 W12X30 HSS8X8X5/8 HSS8X8X5/8 HSS8X8X5/8 HSS8X8X5/8 CONXR FL3/16"X7 3/4"
B-3
CFA1027
B-3 B-4 W12 X30
CFA1028
B-4
CFA1016
CFA1028
CFA1019
CFA1027
BFA 100 4
B-6 W12X30
W12 X30 B-7 W12 X30 W12 X30
CFA1013
CFA1018
NORTH
0 X3 12 4 W B0 X3 12 4 W B
CFA1017
CFA1014
CFA1016
CFA1015
CFA1026
1 B-
B-7
W12 X30
0 X4 12 W
CFA1012
W12 X30 W12 X30 B-4 W12 X30 0 X3 12 4 W B0 X3 12 W 30 4 X 2 I B 1 30 4 W 12X BH 0 3 W X3 B 12 0 W 3 0 4 X B30 X3 12 12 2X 4 W W1 3 W BCFA1014 3 30 BX B0 12 X3 12 0 4 W 0 W BX3 X3 -4 12 0 12 B 3 0 3 W 4 W 12X X3 BB12 30 W 3 W X 4 2 B 1 B0 4 W X3 B12 W 3 B-
CFA1011
4 B-
0 X3 12 W
CFA1013
18
CFA1011
CFA1012
4 B-
0 X3 12 0 W X3 2 1 3 W B0 X3 12 3 W B
3 B-
CFA1011
4 B-
0 X3 0 12 X3 W 12 W 3 B-
0 X3 12 W 0 3 X 12 0 3 W X3 B12 0 4 W X3 B 12 3 W B0 X3 12 4 W B0 X3 12 4 W B-
CFA1010
3 B-
CFA1010
0 X3 12 W
CFA1011
0 X3 12 4 W B
CFA1012
CFA1009
CFA1008
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
CFA1012
0 X3 12 4 W B 3 B0 X3 12 W 0 X3 12 W 30 X 12 4 W B-
4 B-
17
16
15
14
13
G 10
D C
12
F E 9
B.5
11
0 REV
01/16/2012 DATE
ConXtech
AREA 10 FILTRATION
AREA 10 FILTRATION ISOMETRIC BELRIDGE WATER SOFTENING PLANT CMK JOB No. 01/15/2012 1049
DRG No.
E10000
BILL OF MATERIAL
QTY. MARK NAME LENGTH WEIGHT EA TOTAL CAMBER REMARKS WEIGHT
68 68 C-3 HSS8X8X5/8 GRAVITY CLIP ASSEMBLY INNER COLLAR PL1 1/2"X16" 1'-4" GC1 cx04 BP1 272 544 68 23'-6 1/2" 1313.92
C-3
AREA 4 10 11
3
QTY. 30 10 28
ALL WELDED PARTS ARE SHOWN TO BE WELDED ALL AROUND TO CREATE A SEAL PREVENTING WATER SEEPING BETWEEN CONNECTION MATERIALS IN THE FIELD AFTER GALVANIZING.
SHOP NOTE:
23'-8 (HSS8X8X 5/8 x 23'-61/2) EL553'-2 3'-4 3'-4 6'-8 10'-0 INNER COLLAR cx04
1/4 1/4
3'-4
11/2
1 3/16"
A B
MAX. FOR SEAL TYP.
1/8
C
MAX. FOR SEAL TYP.
9/16" 9/16" 13/16"
5/8
9/16"
GA 4
2" 1 2 2 2 2 2 2 2 2 1
12'-41/2
A-A
A
GC1 (CTR'D) 2'-6 10'-81/2 11'-21/2
GC1 (CTR'D)
20'-41/2
1 3/16"
9/16"
13/16"
BP1 1
2"
GA 4 INNER COLLAR cx04 INNER COLLAR cx04 (BS) 18'-81/2 7'-6 14'-101/2 6 19'-21/2 2'-6 22'-101/2
TYP. 10'-81/2 6
3/16
GC1 (CTR'D)
RD
14'-101/2 23'-61/2
8'-0
GC1 (CTR'D)
B-B
A For Approval For Fabrication Revised For Fabrication Revised For Fabrication
11/10/11
11/13/11
12/05/11
C-C
01/05/12
BELRIDGE WATER SOFTENING PLANT KERN, COUNTY, CA COLUMN-CM-24 ASSEMBLY COLUMN-CM-24 CMK SMF
CORPORATE OFFICE 24493 CLAWITER ROAD, HAYWARD CA 94545 TEL. (510) 264-9111 FAX (510) 264-1181
06/20/12
NO. REMARKS
ISSUED DATE
HOLES:
13 " DIA. HOLES (TYP UNO.) 16 3" STRUCTURAL BOLTS: 4 A-325 (TYP UNO.) FINISH: GALVANIZED
SCALE
PROJ. NO.
DWG NO.
REV
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
SPE: N/A
MATERIAL STEEL BEAMS ASTM A992 50 KSI (TYP UNO) CHANNEL, ANGLE ASTM A36 KSI (TYP UNO) PLATE ASTM A36 KSI (TYP UNO) STEEL TUBE ASTM A500, GRADE C ConXR COLLAR PARTS ARE ASTM A572 50 KSI
1:8
1049
C-3
BILL OF MATERIAL
QTY. MARK NAME LENGTH WEIGHT EA TOTAL CAMBER REMARKS WEIGHT
19'-3"
84.56
RD
AREA 1
OUTER COLLAR cx03
QTY. 64 3 4 5 6 7 8 10
5
0" 30 2 4
60 66 28 19 41 20 37 11 20 42 21
1/4 1/4
(-41/2)
1/4
TYP. @ FLANGES
ALL WELDED PARTS ARE SHOWN TO BE WELDED ALL AROUND TO CREATE A SEAL PREVENTING WATER SEEPING BETWEEN CONNECTION MATERIALS IN THE FIELD AFTER GALVANIZING.
SHOP NOTE:
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
For Approval For Fabrication Revised For Fabrication Revised For Fabrication Revised For Fabrication
OUTER COLLAR cx03
11/10/11
11/13/11
12/05/11
01/05/12
01/18/12
06/20/12
BELRIDGE WATER SOFTENING PLANT KERN, COUNTY, CA BEAM-BMM ASSEMBLY BEAM-BMM CMK SMF
CORPORATE OFFICE 24493 CLAWITER ROAD, HAYWARD CA 94545 TEL. (510) 264-9111 FAX (510) 264-1181
07/06/12
NO. REMARKS
ISSUED DATE
HOLES:
13 " DIA. HOLES (TYP UNO.) 16 3" STRUCTURAL BOLTS: 4 A-325 (TYP UNO.) FINISH: GALVANIZED
SCALE
PROJ. NO.
DWG NO.
REV
SPE: N/A
MATERIAL STEEL BEAMS ASTM A992 50 KSI (TYP UNO) CHANNEL, ANGLE ASTM A36 KSI (TYP UNO) PLATE ASTM A36 KSI (TYP UNO) STEEL TUBE ASTM A500, GRADE C ConXR COLLAR PARTS ARE ASTM A572 50 KSI
1:8
1049
B-4
BILL OF MATERIAL
QTY. MARK NAME LENGTH WEIGHT EA TOTAL CAMBER REMARKS WEIGHT
AREA 1 3 4 5 6 7 8 10 25
4
QTY. 21 23 12 31 13 18 13 17 4 26 2
13/16
5/8
6 3 /1
6 3 /1
23/4
DETAIL A
19'-2
1 2 DET. A 23/4
5/8
DET. A
23/4
(-41/2)
A For Approval For Fabrication Revised For Fabrication Revised For Fabrication Revised For Fabrication Added Qty for Area 25
11/10/11
11/13/11
12/05/11
01/05/12
01/18/12
06/05/12
BELRIDGE WATER SOFTENING PLANT KERN, COUNTY, CA BEAM-BGG ASSEMBLY BEAM-BGG CMK SMF
CORPORATE OFFICE 24493 CLAWITER ROAD, HAYWARD CA 94545 TEL. (510) 264-9111 FAX (510) 264-1181
06/13/12
NO. REMARKS
ISSUED DATE
13 " DIA. HOLES (TYP UNO.) HOLES: 16 3" STRUCTURAL BOLTS: 4 A-325 (TYP UNO.)
5/8
FINISH: GALVANIZED
SCALE
PROJ. NO.
DWG NO.
REV
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
SPE: N/A
MATERIAL STEEL BEAMS ASTM A992 50 KSI (TYP UNO) CHANNEL, ANGLE ASTM A36 KSI (TYP UNO) PLATE ASTM A36 KSI (TYP UNO) STEEL TUBE ASTM A500, GRADE C ConXR COLLAR PARTS ARE ASTM A572 50 KSI
1:4
1049
B-3
RD 11/2
19'-11/2
2 2
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
W8X28 x 19'-3 (-41/2)
(-41/2)
ConXtech
LENGTH WEIGHT
0 19'-3" 11875 A992
MARK QTY
22 22 W8X28 ANCHOR SUPPORT BEAMS
BILL OF MATERIAL
DESCRIPTION REMARKS TOTAL WEIGHT THIS DRAWING
11875
24493 Clawiter Rd. Hayward, CA DESCRIPTION PROJECT NAME DRAWN BY DATE DRAWN
B-15 B-15
01/30/2012
1049
B-15
2 2
BILL OF MATERIAL
QTY. MARK NAME LENGTH WEIGHT EA TOTAL CAMBER REMARKS WEIGHT
1 1 T-15 HSS6X6X1/4 COLUMN CAP ASSEMBLY FL1/2"X8" 1'-10" M-1 p11 1 1 3'-6 1/8" 62.60
48.56 24.96
AREA 25
QTY. 1
M-1
41/4
81/4
1/2
p11 (CTR'D)
41/4
41/4
A-A
PROJECT:
For Fabrication
06/06/12
NO. REMARKS
ISSUED DATE
HOLES:
13 " DIA. HOLES (TYP UNO.) 16 3" STRUCTURAL BOLTS: 4 A-325 (TYP UNO.) FINISH: GALVANIZED
CMK SMF
11
1'-10
SCALE
PROJ. NO.
DWG NO.
REV
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
SPE: N/A
MATERIAL STEEL BEAMS ASTM A992 50 KSI (TYP UNO) CHANNEL, ANGLE ASTM A36 KSI (TYP UNO) PLATE ASTM A36 KSI (TYP UNO) STEEL TUBE ASTM A500, GRADE C ConXR COLLAR PARTS ARE ASTM A572 50 KSI
1:4
1049
T-15
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
Copyright 2000-2012 ConXtech, Inc. All rights reserved. Regarding information presented on this page, please refer to the patent notice which appears on the back cover of this document.
Fax: 510-264-1181
ConXtech, Inc. 24493 Clawiter Road, Hayward, CA 94545 Additional information is available on our website at www.conxtech.com
Structures, methodologies, concepts, descriptions thereof, trademarks, logos of ConXtech shown, illustrated and described in this document are covered by various forms of intellectual property protections considered by ConXtech to be of great value. These protections include, but are not limited to, copyrights, and the following U.S. and Foreign Patents which variously cover ConXtechs ConX structures and methodologies:
US and Foreign Patents: U.S. P.N. 6,837,016; U.S. P.N. 7,021,020; U.S. P.N. 7,837,084; Australia P.N. 2001288615; Canada P.N. 2,458,706; China P.N. ZL 01 8 23730.4; Japan P.N. 4165648; Mexico P.N. 262,499; U.S. P.N. 6,802,169 B2; U.S. P.N. 8,161,707; Australia P.N. 2002244318; Brazil P.N. PIO209851-20; Canada P.N. 2479217; China P.N. ZL 2008 1 0110625.8; Mexico P.N. 282571; U.S. P.N. 7,051,917; Australia P.N. 2004319371; Canada P.N. 2,564,195; China P.N. ZL 2004 8 0042862.5; Hong Kong P.N. 1102268 Japan; P.N. 4427080; Mexico P.N. 275284; U.S. P.N. 7,127,863; U.S. P.N. 7,530,205; U.S. P.N. 7,146,770; U.S. P.N. 7,131,240; U.S. P.N. 7,503,151; U.S. P.N. 7,621,099; U.S. P.N. 7,716,820; U.S. P.N. 8,205,312; China P.N. ZL2004 8 0026485.6; EPO P.N. 1668197 (FR); EPO P.N. 1668197 (DE); EPO P.N. 1668197 (IE); EPO P.N. 1668197 (IT); EPO P.N. 1668197 (NL); EPO P.N. 1668197 (ES); EPO P.N. 1668197 (SE); EPO P.N. 1668197 (GB); Turkey P.N. TR 2009 0820 T4; India P.N. 219,425; U.S. P.N. 7,527,466; U.S. P.N. 7,040,069; U.S. P.N. 7,621,088; U.S. P.N. 7,441,692; Australia P.N. 2005283131; Canada P.N. 2,578,959; China P.N. ZL 2005 8 0030159.7; Japan P.N. 4,482,586; Mexico P.N. 270,862; U.S. P.N. 7,051,918; U.S. P.N. 7,802,406; Canada P.N. 2,153,038; US P.N. 8,011,150; U.S. P.N. 7,837,084; U.S. P.N. 7,941,985; Australia P.N. 2008260527; Canada P.N. 2,685,181. Other U.S. and Foreign Patent Protection Pending.