Professional Documents
Culture Documents
s LOW INPUT BIAS AND OFFSET CURRENT s OUTPUT SHORT-CIRCUIT PROTECTION s HIGH INPUT IMPEDANCE JFET INPUT
STAGE
N DIP14 (Plastic Package)
s INTERNAL FREQUENCY COMPENSATION s LATCH UP FREE OPERATION s HIGH SLEW RATE : 16V/s (typ)
D SO14 (Plastic Micropackage)
DESCRIPTION These circuits are high speed JFET input quad operational amplifiers incorporating well matched, high voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low input bias and offset currents, and low offset voltage temperature coefficient. PIN CONNECTIONS (top view)
ORDER CODE
Package Part Number Temperature Range N LF147 LF247 LF347 Example : LF347IN -55C, +125C -40C, +105C 0C, +70C D
N = Dual in Line Package (DIP) D = Small Outline Package (SO) - also available in Tape & Reel (DT)
Output 1 1 Inverting Input 1 2 Non-inverting Input 1 3 VCC + 4 Non-inverting Input 2 5 Inverting Input 2 6 Output 2 7 + + + +
14 Output 4 13 Inverting Input 4 12 Non-inverting Input 4 11 VCC 10 Non-inverting Input 3 9 8 Inverting Input 3 Output 3
March 2001
1/10
Non-inverting input
Inverting input 100W 100 W
200 W Output
30k
8.2k
1.3k VCC
35k
1.3k
35k
100 W
Parameter Supply voltage - note 1) Input Voltage - note Power Dissipation Output Short-circuit Duration - note 4) Operating Free-air Temperature Range Storage Temperature Range
2) 3)
LF147
LF247
LF347
Unit V V V mW
C C
All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the supply voltages where the zero reference level is the midpoint between VCC + and VCC -. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts, whichever is less. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded
2/10
Min.
Typ. 3 10 5
Max. 10 13
Unit mV
Iib
Input Bias Current - note 1 Tamb = 25C Tmin Tamb Tmax Large Signal Voltage Gain (RL = 2k, Vo = 10V) , Tamb = 25C Tmin Tamb Tmax Supply Voltage Rejection Ratio (RS = 10k) Tamb = 25C Tmin Tamb Tmax Supply Current, Per Amp, no Load Tamb = 25C Tmin Tamb Tmax Input Common Mode Voltage Range Common Mode Rejection Ratio (RS = 10k) Tamb = 25C Tmin Tamb Tmax Output Short-Circuit Current Tamb = 25C Tmin Tamb Tmax Output Voltage Swing Tamb = 25C RL = 2k RL = 10k RL = 2k RL = 10k 11 50 25 80 80
20
Avd
SVR
70 70 10 10 10 12 10 12 12
IOS
40
60 60 V
Vopp
12 13.5
SR tr Kov GBP Ri
Slew Rate Vi = 10V, RL = 2k, CL = 100pF, Tamb = 25C, unity gain Rise Time Vi = 20mV, RL = 2k,CL = 100pF, Tamb = 25C, unity gain Overshoot Vi = 20mV, RL = 2k, CL = 100pF, Tamb = 25C, unity gain Gain Bandwidth Product f =100kHz, Tamb = 25C, Vin = 10mV, RL =2k, CL = 100pF Input Resistance
THD
Total Harmonic Distortion f =1kHz, Av = 20dB, RL = 2k, CL = 100pF Tamb = 25C, VO = 2Vpp
Equivalent Input Noise Voltage (RS = 100, f = 1KHz)
en
The input bias currents are junction leakage currents which approximately double for every 10C increase in the junction temperature.
3/10
30 25
RL = 10 k Tamb = +25C
20
15 10
5
0 2 4 6 8 10 12 SUPPLY VOLTAGE ( V) 14 16
4/10
0.01 -50
-25
25
50
75
100
125
-25
25
50
75
100
125
TEMPERATURE (C)
TEMPERATURE (C)
LARGE SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION AND PHASE SHIFT versus FREQUENCY
180
10
1 100
90
100
250 225 200 175 150 125 100 75 50 25 0 -75 -50 -25 0 25 50 TEMPERATURE (C)
75
100
125
2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 -75 -50 -25 0 25 50 TEMPERATURE (C)
2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0
75
100
125
10
12
14
16
5/10
89 COMMON MODE MODE REJECTION RATIO (dB) 88 87 86 85 84 83 -75 -50 -25 0 25 50 75 100 125
R L = 10 k VC C = 15V
6 4 2 0 -2 -4 -6 0
VCC= 15V R L = 2 kW
OUTPUT
INPUT
0.5
1.5
2.5
3.5
TEMPERATURE (C)
TIME (m s)
70 60
90%
20 16 12 8 4
10%
50 40 30 20 10 0 10 40 100 400 1k
0 -4 0
CC
= 15V
4k
10k
40k 100k
FREQUENCY (Hz)
1 TOTAL HARMONIC DISTORTION (%) 0.4 0.1 0.04 0.01 0.004 0.001 100 400 1k 4k 10k 40k 100k FREQUENCY (Hz) VV = 15V CC CC = 15V 11 AA V V= = VV == 6V 6V (rms) OO (rms) +25C T amb T amb= = +25C
6/10
10k W
eI
1k W
1/4 LF347 eo
RL
CL= 100pF
fO = 100kHz 1M W 1m F Input 100k W 100m F 100k W 100k W 100k W 1/4 LF347 1/4 LF347 Output B 1/4 LF347 Output A
+ VCC
7/10
16k W 220pF 43k W Input 43k W 220pF 4/1 LF347 43k W 4/1 LF347 30k W 43k W 220pF 4/1 LF347 43k W 220pF
16k W
1.5k W
1.5k W
Ground Output A
OUTPUT A
OUTPUT B
8/10
Millimeters Dim. Min. a1 B b b1 D E e e3 F i L Z 0.51 1.39 0.5 0.25 20 8.5 2.54 15.24 7.1 5.1 3.3 1.27 2.54 0.050 Typ. Max. 1.65 Min. 0.020 0.055
Inches Typ. Max. 0.065 0.020 0.010 0.787 0.335 0.100 0.600 0.280 0.201 0.130 0.100
9/10
L C
G c1
a2 b e3 D M e
s E
14 1
8 7 F
Millimeters Dim. Min. A a1 a2 b b1 C c1 D (1) E e e3 F (1) G L M S 0.1 0.35 0.19 0.5 45 (typ.) 8.55 5.8 1.27 7.62 3.8 4.6 0.5 4.0 5.3 1.27 0.68 8 (max.) 0.150 0.181 0.020 8.75 6.2 0.336 0.228 Typ. Max. 1.75 0.2 1.6 0.46 0.25 Min. 0.004 0.014 0.007
a1
Inches Typ. Max. 0.069 0.008 0.063 0.018 0.010 0.020 0.344 0.244 0.050 0.300 0.157 0.208 0.050 0.027
Note : (1) D and F do not include mold flash or protrusions - Mold flash or protrusions shall not exceed 0.15mm (.066 inc) ONLY FOR DATA BOOK.
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics 2001 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom http://www.st.com
10/10
b1
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.