You are on page 1of 16

Assignment 6: Dynamics of Rotational Motion

Due: 2:00am on Saturday, October 23, 2010


Note: To understand how points are awarded, read your instructor's Grading Policy. [Switch to Standard Assignment View]

Finding Torque
A force of magnitude , making an angle with the x axis, is applied to a particle located at point A, and the four reference points (i.e., A, B, C,

at Cartesian coordinates (0, 0) in the figure. The vector

and D) all lie in the xy plane. Rotation axes A - D lie parallel to the z axis and pass through each respective reference point. The torque of a force acting on a particle having a position vector with respect to a reference point (thus product of between points from the reference point to the point at which the force acts) is equal to the cross and and , . The magnitude of the torque is is perpendicular to both and , where . For this problem is the angle ; in terms

; the direction of

negative torque about a reference point corresponds to clockwise rotation. You must express of , , and/or when entering your answers.

Part A What is the torque Hint A.1 due to force about the point A?

When force is applied at the pivot point Hint not displayed

Express the torque about point A at Cartesian coordinates (0, 0).


ANSWER: = 0

Correct

Part B

What is the torque ), located a distance Hint B.1

due to force

about the point B? (B is the point at Cartesian coordinates (0,

from the origin along the y axis.)

Finding

with respect to a reference point Hint not displayed

Express the torque about point B in terms of


ANSWER: =

, and/or other given coordinate data.

Correct

Part C What is the torque distance Hint C.1 about the point C, located at a position given by Cartesian coordinates ( , 0), a

along the x axis?

Clockwise or counterclockwise? Hint not displayed

Express the torque about point C in terms of


ANSWER: =

, and/or other given coordinate data.

Correct

Part D What is the torque with the x axis? about the point D, located at a distance from the origin and making an angle

Express the torque about point D in terms of


ANSWER: =

, and/or other given coordinate data.

Correct
can also be expressed as a third-order determinant

Note that the cross product

which simplifies to

when

and

lie in the xy plane.

An Unfair Race
This applet shows the results of releasing a frictionless block and a rolling disk with equal masses from the top of identical inclined planes.

the top of identical inclined planes. Part A Which of the following is the best explanation of the results shown in the applet? ANSWER:

The disk loses energy to friction as it rolls, but the box is frictionless and so it speeds up more quickly and gets to the bottom first. The potential energy of the disk is converted into translational and rotational kinetic energy, so the translational speed grows more slowly than that of the box, which has no rotational energy. The net forces on the two objects are equal, but the force on the disk gets partially used up in creating the torque necessary to make it roll. The net forces on the two objects are equal, but the force on the disk is not directed parallel to the ramp, and so does not create as great an acceleration down the ramp. Correct

This applet shows the same situation, but it also shows, through bar graphs that change with time, the way that the energy is transformed as the box and the disk go down the inclined plane. Assume that the box and disk each have mass , the top of the incline is at height , and the angle between the incline and the ground is let the radius of the disk be Part B How much sooner does the box reach the bottom of the incline than the disk? Hint B.1 . (i.e., the incline is at an angle above the horizontal). Also,

How to approach the problem Hint not displayed

Hint B.2

Find the final speed of the box Hint not displayed

Hint B.3

Find the final speed of the disk Hint not displayed

Hint B.4

Finding the average speed Hint not displayed

Hint B.5

Finding the time from the average speed Hint not displayed

Hint B.6

Find the length of the incline Hint not displayed

Express your answer in terms of some or all of the variables acceleration due to gravity .

, and

, as well as the

acceleration due to gravity .


ANSWER:

Correct
You should look at your answer and consider limiting cases. A simple one is that the time difference should tend to zero as the length of the board shrinks to zero. Simply express the height of the board in terms of the length of the incline and you'll see that your answer indeed behaves this way. Your answer also predicts that the difference in time grows longer as shrinks toward zero while the height remains fixed (i.e., the difference in time grows longer as the length of the board grows longer). It might not be immediately obvious to you that this should happen, but it is not inconceivable, and you can do some simple experiments to see that it is actually true. As grows toward , you might expect the difference in time to go to zero, because if you drop a disk and a box they fall at the same rate. However, recall that your derivation included the assumption that the disk rolls without slipping, which is definitely not the case if the disk is simply dropped vertically. Therefore, this formula shouldn't apply to the case of simply dropping the disk and box. Can you think of a situation with a vertical drop in which the disk would obey ?

Pulling a String to Accelerate a Wheel


A bicycle wheel is mounted on a fixed, frictionless axle, as shown . A massless string is wound around the wheel's rim, and a constant horizontal force of magnitude starts pulling the string from the top of the wheel starting at time when

the wheel is not rotating. Suppose that at some later time the string has been pulled through a distance . The wheel has moment of inertia , where less than 1, is a dimensionless number is its

is the wheel's mass, and

radius. Assume that the string does not slip on the wheel.

Part A Find , the angular acceleration of the wheel, which results from pulling the string to the left. Use

the standard convention that counterclockwise angular accelerations are positive. Hint A.1

Relate torque about the axle to force applied to the wheel Hint not displayed

Hint A.2

Relate torque on wheel to angular acceleration Hint not displayed

Express the angular acceleration,

, in terms of

, and

(but not

).

Express the angular acceleration,


ANSWER: =

, in terms of

, and

(but not

).

Correct

Part B The force pulling the string is constant; therefore the magnitude of the angular acceleration of

the wheel is constant for this configuration. Find the magnitude of the angular velocity .

of the wheel when the string has been pulled a distance ; these expressions look very different but are

Note that there are two ways to find an expression for equivalent. Hint B.1

What the no-slip case means Hint not displayed

Hint B.2

Review of translational motion with constant acceleration


the velocity is , will

In kinematics, you learned that for translational motion with constant acceleration given by be proportional to . . The wheel is stationary at

, so the displacement of the string,

Hint B.3

When has the string been pulled a distance


when the string has been pulled a distance

?
.

Find the time

Express your answer in terms of


ANSWER: =

and

Correct

Hint B.4

Relating translational acceleration and angular acceleration


, of the acceleration of the string.

Find the magnitude,

Express your answer in terms of


ANSWER: =

and

Correct
of the string is given by . . Take the

There is no slip, so the magnitude of the velocity first time derivative of this equation to relate and

Express the angular velocity

of the wheel in terms of the displacement

, the magnitude

of the applied force, and the moment of inertia of the wheel

, if you've found such a

of the applied force, and the moment of inertia of the wheel

, if you've found such a

solution. Otherwise, following the hints for this part should lead you to express the angular velocity of the wheel in terms of the displacement , the wheel's radius , and .
ANSWER: =

Correct
This solution can be obtained from the equations of rotational motion and the equations of motion with constant acceleration. An alternate approach is to calculate the work done over the displacement by the force and equate this work to the increase in rotational kinetic energy of rotation of the wheel

Part C Find , the speed of the string after it has been pulled by Hint C.1 over a distance .

Relating the speed of the string

to the angular velocity

Hint not displayed Express the speed of the string in terms of your answer.
ANSWER: =

, and

; do not include

, or

in

Correct
Note that this is the speed that an object of mass pulled a distance (which is less than . ) would attain if

by a force with constant magnitude

Hoop on a Ramp
A circular hoop of mass inclined at an angle , radius , and infinitesimal thickness rolls without slipping down a ramp with the horizontal.

Part A What is the acceleration Hint A.1 of the center of the hoop?

How to approach the problem Hint not displayed

Hint A.2

Find the torque about the center of mass Hint not displayed

Hint A.3

Find an expression for the torque Hint not displayed

Hint A.4

What is the moment of inertia of the hoop? Hint not displayed

Hint A.5

Find the frictional force Hint not displayed

Hint A.6

Find the linear acceleration Hint not displayed

Hint A.7

Putting it all together Hint not displayed

Express the acceleration in terms of physical constants and all or some of the quantities , and .

ANSWER: =

Correct
So the acceleration is independent of the hoop characteristics, that is, the mass and size (radius) of the hoop. This is quite generally true for objects freely rolling down a ramp; the acceleration depends only on the distribution of mass, for example, whether the object is a disk or a sphere, but within each class the acceleration is the same. For example, all spheres will accelerate at the same rate, though this rate is different from the rate for (all) disks. Part B What is the minimum coefficient of (static) friction needed for the hoop to roll without slipping? Note that it is static and not kinetic friction that is relevant here, since the bottom point on the wheel is not moving relative to the ground (this is the meaning of no slipping). Hint B.1

How to approach the problem Hint not displayed

Hint B.2

Find the maximum value of the frictional force Hint not displayed

Hint B.3

What is the normal force? Hint not displayed

Hint B.4

Putting it all together Hint not displayed

Express the minimum coefficient of friction in terms of all or some of the given quantities , and .

ANSWER: =

Correct

Part C Imagine that the above hoop is a tire. The coefficient of static friction between rubber and concrete is typically at least 0.9. What is the maximum angle you could ride down without worrying about skidding?

Express your answer numerically, in degrees, to two significant figures.


ANSWER: = 61 Correct between rubber and concrete drops

When roads are wet or icy though, the coefficient of friction

to about 0.3 (or less), making skidding likely at much smaller angles.

Acceleration of a Pulley
A string is wrapped around a uniform solid cylinder of radius , as shown in the figure . The cylinder can rotate freely about its axis. The loose end of the string is attached to a block. The block and cylinder each have mass . Note that the positive y direction is downward and counterclockwise torques are positive.

Part A Find the magnitude Hint A.1 of the angular acceleration of the cylinder as the block descends.

How to approach the problem Hint not displayed

Hint A.2

Find the net force on the block Hint not displayed

Hint A.3

Find the net torque on the pulley Hint not displayed

Hint A.4

Relate linear and angular acceleration Hint not displayed

Hint A.5

Putting it together Hint not displayed

Express your answer in terms of the cylinder's radius due to gravity .


ANSWER: = Answer not displayed

and the magnitude of the acceleration

Change in Angular Velocity Ranking Task


A merry-go-round of radius , shown in the figure, is rotating at constant angular speed. The friction in its is dropped onto the merry-go-round, at a bearings is so small that it can be ignored. A sandbag of mass

position designated by . The sandbag does not slip or roll upon contact with the merry-go-round.

Part A Rank the following different combinations of and on the basis of the angular speed of the merry-go-round

after the sandbag "sticks" to the merry-go-round.

after the sandbag "sticks" to the merry-go-round.

Hint A.1

How to approach the problem Hint not displayed

Hint A.2

Determining the change in moment of inertia Hint not displayed

Rank from largest to smallest. To rank items as equivalent, overlap them.


ANSWER:

Answer not displayed

Balancing Torques Ranking Task


A sign is to be hung from the end of a thin pole, and the pole supported by a single cable. Your design firm brainstorms the six scenarios shown below. In scenarios A, B, and D, the cable is attached halfway between the midpoint and end of the pole. In C, the cable is attached to the mid-point of the pole. In E and F, the cable is attached to the end of the pole. Part A Rank the design scenarios (A through F) on the basis of the tension in the supporting cable. Hint A.1

How to approach the problem Hint not displayed

Hint A.2

The mathematical relationship Hint not displayed

Rank from largest to smallest. To rank items as equivalent, overlap them.


ANSWER:

Answer not displayed

Twirling a Baton
A majorette in a parade is performing some acrobatic twirlings of her baton. Assume that the baton is a uniform rod of mass 0.120 and length 80.0 . Part A Initially, the baton is spinning about a line through its center at angular velocity 3.00 angular momentum? . What is its

Hint A.1

Angular momentum for a rigid body rotating about an axis of symmetry Hint not displayed

Hint A.2

Moment of inertia Hint not displayed

Express your answer in kilogram meters squared per second.


ANSWER:

Answer not displayed

Part B

Part not displayed

Hockey Stick and Puck


A hockey stick of mass and length is at rest on the ice (which is assumed to be frictionless). A puck with mass hits the stick a distance from the middle of the stick. Before the collision, the puck was moving with speed in a direction perpendicular to the stick, as indicated in the figure. The collision is completely inelastic, and the puck remains attached to the stick after the collision.

Part A Find the speed Hint A.1 of the center of mass of the stick+puck combination after the collision.

Which conservation law to use Hint not displayed

Hint A.2

Calculate the initial momentum of the system Hint not displayed

Hint A.3

Calculate the final momentum of the system Hint not displayed

Express

in terms of the following quantities:

, and

ANSWER:

= Answer not displayed

Part B After the collision, the stick and puck will rotate about their combined center of mass. How far is this center of mass from the point at which the puck struck? In the figure, this distance is .

Hint B.1

Distance from middle of stick to center of mass of stick+puck Hint not displayed

ANSWER:

= Answer not displayed

Part C What is the angular momentum of the system before the collision, with respect to the center of

mass of the final system?


Hint C.1

Formula for angular momentum Hint not displayed

Express
ANSWER:

in terms of the given variables.


= Answer not displayed

Part D What is the angular velocity of the stick+puck combination after the collision? Assume that the stick about its center.

is uniform and has a moment of inertia Hint D.1

How to approach the problem Hint not displayed

Hint D.2

Express angular momentum in terms of moment of inertia and velocity Hint not displayed

Hint D.3

Calculate the moment of inertia Hint not displayed

Hint D.4

Putting it all together Hint not displayed

Your answer for


ANSWER:

should not contain the variable .


= Answer not displayed

Part E Which of the following statements are TRUE? 1) Kinetic energy is conserved. 2) Linear momentum is conserved. 3) Angular momentum of the stick+puck is conserved about the center of mass of the combined system. 4) Angular momentum of the stick+puck is conserved about the (stationary) point where the collision occurs. Hint E.1

About conservation of angular momentum Hint not displayed

ANSWER:

1 only 2 only 3 only 4 only 1&2 1&4 2&4 12&3 23&4 Answer not displayed

The last question is optional. If your lecturer did not go through this topic, you can skip it totally.

A Toy Gyroscope
The rotor (flywheel) of a toy gyroscope has mass 0.140 kilograms. Its moment of inertia about its axis is kilogram meters squared. The mass of the frame is 0.0250 kilograms. The gyroscope is supported on a single pivot with its center of mass a horizontal distance 4.00 centimeters from the pivot. The gyroscope is precessing in a

from the pivot. The gyroscope is precessing in a horizontal plane at the rate of one revolution in 2.20 seconds.

Part A Find the upward force Hint A.1 exerted by the pivot.

Precession in a gyroscope Hint not displayed

Hint A.2

How to approach the problem Hint not displayed

Hint A.3

Balance of forces Hint not displayed

Enter your answer in newtons to four significant figures.


ANSWER: = Answer not displayed

Part B Find the angular speed minute. Hint B.1 at which the rotor is spinning about its axis, expressed in revolutions per

How to approach the problem Hint not displayed

Hint B.2

How to calculate the angular momentum Hint not displayed

Hint B.3

Calculate the precession angular speed Hint not displayed

Hint B.4

Calculate the torque Hint not displayed

Hint B.5

Using the angular momentum

Hint not displayed Enter your answer in revolutions per minute to four significant figures.
ANSWER: = Answer not displayed

Score Summary:
Your score on this assignment is 99.8%. You received 39.9 out of a possible total of 40 points.

You might also like