Professional Documents
Culture Documents
MANUFACTURED
SUBSTANCES IN
INDUSTRY
Content Page
Introduction 3
9.1 Sulphuric acid
9.1.1 Properties of sulphuric acid 4
9.1.2 The uses of sulphuric acid 5
9.1.3 The industrial process in manufacture of sulphuric acid 7
9.1.4 Environmental pollution by sulphuric acid 10
9.2 Ammonia and its salt
9.2.1 Properties of ammonia 11
9.2.2 The uses of ammonia 12
9.2.3 The industrial process in manufacture of ammonia 13
9.3 Alloys
9.3.1 Physical properties of pure metals 14
9.3.2 Meaning and purpose of making alloys 15
9.4 Synthetic polymers
9.4.1 The meaning and types of polymers 16
9.4.2 Advantages of synthetic polymers 17
9.4.3 Environmental pollution caused by synthetic polymers 17
9.4.4 Methods to overcome the environmental pollution caused 18
by synthetic polymers
9.5 Glass and ceramics 18
9.6 Composite material 22
Conclusion 24
References 25
INTRODUCTION
All the objects that exist around us are made up of chemical substances. These
objects exist an element, compound or mixture. All these objects contribute benefit to
humankind. As time goes on, human has done many researches to ensure all these
chemical substances will be enough for the use of themselves.
2
Chapter 9 of Form 4 syllabus introduces the students with manufactured
substances in industry. This is important for the students to appreciate the knowledge of
chemistry that is still new for themselves. Personally, I think that this chapter is an
interesting chapter as it revealed the way of scientist produces the material around me. It
also gives me new knowledge of the uses of chemical substances that I usually found in
the laboratories.
3
4. Sulphuric acid is a non-volatile diprotic acid.
5. It is a highly corrosive, dense and oily liquid.
6. Concentrated sulphuric acid is a viscous colourless liquid.
Soluble in
water
Non-volatile Diprotic
acid acid
Properties of
Highly sulphuric acid Dense
corrosive
Oily Viscous
liquid colourless
liquid
1) To manufacture fertilizers
There are many fertilizers that can be made of sulphuric acid. Some of them are:
4
b) Ammonium sulphate
H2SO4
+2NH3 → (NH4) 2 SO4
c) Potassium sulphate
H2SO4
+2NH3 → (NH4) 2 SO4
2) To manufacture detergents
Sulphuric acid reacts with hydrocarbon to produce sulphonic acid. Sulphonic acid is then
neutralized with sodium hydroxide to produce detergents. Examples of hydrocarbon
7) To manufacture pesticides
5
b. As a drying or dehydrating agent
c. As an oxidizing agent
d. As a sulphonating agent
e. As a catalyst
Remove As an
metal oxides Manufacture electrolyte in
from metal pesticides lead-acid
surfaces accumulators
before
electroplating
Manufacture Manufacture
detergents synthetic
fibres
Metal cleaning
Synthetic
2%
fibres Dyes
9% 2%
As an As an acid
electrolyte 2%
10%
Fertilisers
32%
Detergents
12%
Paint pigment
Other 6
15%
chemicals
16%
Figure 9.4 Uses of sulphuric acid in industry
7
This is then oxidised to sulfur trioxide under the following conditions:
7. In stage II, sulphur dioxide is dried first before being added to dry air to
produce sulphur trioxide. This is:
a) To remove water vapour
b) To remove contaminants
burned in air
Oleum, H2S2O7
9
ii. Destroys trees and plants
iii. Decrease the pH of th soil and make it become acidic
iv. Acid rain flows into the rivers and increases the acidity of water and kill
aquatic living things.
5. Hence, we must reduce the sulphur dioxide from the atmosphere by:
i. Use low sulphur fuels to reduce the emission of sulphur dioxide in exhaust
gases
ii. Remove sulphur dioxide from waste air by treating it with calcium
carbonated before it is released.
10
6. It reacts with hydrogen chloride gas to produce
white fumes of ammonium chloride.
NH3 + HCl → NH4Cl
9. Some metal hydroxides such as zinc hydroxide and copper (II) hydroxide
dissolves in excess aqueous ammonia to form complexes.
Zn(OH)2 + 4NH3→ [Zn(NH3)4] 2+ + 2OH
−
Extremely
Weak soluble in
alkali water
Properties of ammonia
11
Pungent
Colorless
smell
Figure 9.7 Properties of ammonia
Mass of nitrogen
X 100%
Molar mass of fertilizers
12
4. Hydrogen gas used in Haber process can be obtained by two methods:
C + H2O → CO +
a) The reaction between steam and heated coke (carbon)
H2
9.3 ALLOYS
9.3.1 Physical properties of pure metals
1. Pure metals have the following physical properties
a)Good conductor of electricity
b)Malleable
c) Ductile
d)High melting and boiling point
e)High density
2. Pure metals are weak and soft because the arrangement of atoms in pyre
metals make them ductile and malleable.
a) A pure metal contains atoms of the same size arranged in a
regular and organized closed-packed structure.
13
b) Pure metals are soft because the orderly arrangement of atoms
enables the layers of atoms to slide over each other easily when an
external force is applied on them. This makes the matels ductile and
metals can be drawn to form long wires.
c) There are imperfections in the natural arrangements of metal
atoms. Empty space exist in the structures of pure metals. When
hammered or pressed, groups of metal atoms may slide into new
positions in the empty spaces. This makes metals malleable, able to be
made into different shapes or pressed into thin sheets.
3. The strong forces of attraction between metal atoms requires high energy
to overcome it. Hence, most metals have high melting points.
4. The close-packed arrangement of metal atoms results in the
high density of metals.
Ductile
14
9.3.2 Meaning and purpose of making alloys
4. Hence, the layers of metal atoms are prevented from sliding over each
other easily. This makes the alloy harder and stronger, less ductile and less
malleable than its pure metals.
5. The properties of a pure metal are thus improved by making them into
alloys. There are three aims of alloying a pure metal:
15
2. Polymerisation is the chemical process by which the monomers are joined
together to form the big molecule known as the polymers.
3. There are two types of polymerization process:
a) Addition polymerization
b) Condensation polymerization
4. A polymer is a very big molecule (macromolecule). Hence, the relative
molecular mass of a polymer is large.
5. The properties of polymer are different from its monomers.
6. Polymers can be divided into two types:
a) Naturally occurring polymers
1. This type of polymer exists in living things in nature like the plants
and animals.
2. Examples of naturally occuring polymers are:
a) Protein
b) Carbohydrate
c) Natural rubber
3. Naturally occuring polymers are formed by the joining of
monomers by polymerization.
b) Synthetic polymers
1. This type of polymer are man-made by chemical process in
the laboratories.
2. The raw material for synthetic polymers are obtained frompetroleum.
3. The types of synthetic polymers include:
a) Plastics
b) Fibres
c) Elastomers
16
4. Examples of plastics are
polythene(polyethylene),polyvinylchloride(PVC), polypropene
(polypropylene), polystyrene , Perspex and bakelite.
5. Polythene and PVC are produced by addition
polymerization
6. Examples of synthetics fibres are nylon and terylene. They
are produced by condensation polymerization.
17
d) Withstand compression but not stretching
e) Can be easily cleaned
f) Low cost of production
3. Differences between glass and cerement are, glass is transparent, while
ceramic is opaque. Ceramic can withstand a higher temperature than normal glass.
4. Types of glass are
a) Fused glass
•It is consist mainly of silica or silicon dioxide
•It has high heat resistance
b) Soda lime glass
•It cannot withstand high temperatures
c) Borosilicate glass
•It can withstand high temperature
d) Lead glass
• High refractive index
5. Uses of improved glass for specific purpose
a) Photochromic glass
• It is sensitive to light intensity
b) Conducting glass
• It conducts electricity
6. Ceramic is a manufactured substances made from clay, with the
main constituent of aluminosilicate with small quantity of sand and feldspar.
7. Superconductor is one improved ceramics for specific purposes.
Glass
1. Glass is made up from sand.
2. The major component of glass is SiO2.
3. There are four types of glass which are as follows:
• Fused glass
• Soda-lime glass
• Borosilicate glass
18
• Lead crystal glass
Chemical
Name of glass Properties Examples of uses
composition
19
different shapes
More resistant to
chemical reactions
Does not break easily
SiO2 (55%)
Low softening point Decorative items
PbO( 30%)
(600 °C) Crystal glass-
K2O (10%)
High density wares
Lead crystal Na2O ( 3%)
High refractive index Lens
glass Al2 O 3 ( 2%)
Reflects light rays Prisms
and appears spar Chandeliers
kling
Ceramics
1. Ceramic is a manufactured substance made from clay that is dried and then
baked in a kiln at high temperature.
2. The main constituent of clay is aluminosilicate, (which consist of aluminium
oxide and silicon dioxide) with small quantities of sand and feldspar.
3. Kaolinite is an example of high
20
4. Red clay contains iron (III) oxide which gives the red colour .
5. General uses ceramics are as follows of :
21
refractive index brittle and non-
flexible
Glass Heavy, strong but Light, strong, tough,
brittle and non- resilient and flexible,
Fibreglass flexible with high tensile strength
Polyester plastic Light, flexible, elastic
and not flammable
but weak and
inflammable
Glass Transparent and not Sensitive to light:
sensitive to light darkness when light
Silver chloride, or Sensitive to light
Photochromic glass intensity is high,
silver bromide
becomes clear when
light intensity is low
22
CONCLUSION
We must appreciate these various synthetic industrial materials. One of the way is by
doing continuous research and development ( R & D ) to produce better materials used to
improve our standard of living. As we live in a changing world, our society is getting
more complex. New materials are required to overcome new challenges and problems we
face in our daily lives. Synthetic material are developed constantly due to the limitation
and shortage of natural materials. New technological developments are used by scientists
to make new discoveries.
New materials for clothing, shelter, tools and communication to improve our daily
life are developed continuously for the well-being of mankind. New needs and new
problem will stimulate the development of new synthetic materials. For example, the new
use of plastic composite material will replace metal in the making of a stronger and
lighter car body. This will save fuel and improve speed. Plastic composite materials may
one day used to make organs for organ transplant in human bodies. This will become
necessity with the shortage of human organ donors.
23
recycling and development of environmental friendly synthetic material should be
enforced.
REFERENCES
1. Tan Yin Toon, Loh Wai Leng, Tan On Tin, 2008, SUCCESS
Chemistry SPM, Oxford Fajar Sdn.Bhd.
2. Website http://www.answers.com
24