You are on page 1of 1

ABSTRACT

TEMPERATURE AND HUMIDITY CONTROL SYSTEM


USING GRAPHIC LCD AND ARM CONTROLLER




In the textile mills, a particular range of temperature and humidity have to
be maintained for effective storage and production purposes. In this project, we
have interfaced temperature and humidity sensors to the powerful ARM
microcontroller to sense atmospheric temperature and humidity.

The sensed temperature and humidity values are displayed on the raphic
!"#. In the normal conditions, the relay is turned on, indicating that the values
are in the re$uired range. %hen the upper threshold level is crossed, a red !&#
is turned '( and when lower threshold level is crossed, a green !&# is turned
'(. The interfaced relay turns on the controlling devices li)e dehumidifiers etc
when the red !&# is '(. *ence monitoring of the room temperature and
humidity is accomplished by maintaining a database. The database consists of
temperature and humidity values at regular intervals of time.

A menu is created in the raphic !"#. +urther submenus are created
which consist of provisions for setting the lower and upper threshold limits.
,ixel font and +ast !"# software-s are used to create the !''.. ,rogram
compilation is done using the /&I! software .This program is loaded to the
ARM microcontroller using the ,hilips utility software.

You might also like