DURATEK-8050 is a single compound thermoset lacquer made exclusively for float glass back painting. It provides a bubble free, smooth flowing curtain with a dry film thickness of over 40 microns and high adhesion to glass for long term use. It has good humidity and solvent resistance and can be re-coated after baking at 160°C or 180°C for 10-12 minutes to cure. The lacquer should be stored below 28°C and applied in one coat at a viscosity of 40±5 seconds at 25°C to a clean and dry glass surface.
Original Description:
this is a Technical datasheet of duratek 8050 used for glass coatings from colourtech coating india
DURATEK-8050 is a single compound thermoset lacquer made exclusively for float glass back painting. It provides a bubble free, smooth flowing curtain with a dry film thickness of over 40 microns and high adhesion to glass for long term use. It has good humidity and solvent resistance and can be re-coated after baking at 160°C or 180°C for 10-12 minutes to cure. The lacquer should be stored below 28°C and applied in one coat at a viscosity of 40±5 seconds at 25°C to a clean and dry glass surface.
DURATEK-8050 is a single compound thermoset lacquer made exclusively for float glass back painting. It provides a bubble free, smooth flowing curtain with a dry film thickness of over 40 microns and high adhesion to glass for long term use. It has good humidity and solvent resistance and can be re-coated after baking at 160°C or 180°C for 10-12 minutes to cure. The lacquer should be stored below 28°C and applied in one coat at a viscosity of 40±5 seconds at 25°C to a clean and dry glass surface.
DURATEK-8050 is made exclusively for float glass back paint. DURATEK-8050 is a single compound thermoset lacquer.
SALIENT FEATURES OF DURATEK-8050:
Signal Pack System (No Need Of Hardner) Bubble free smooth flowing curtain. High Gloss Dry film thickness > 40 micron Solvent rub test : 200 strokes High Adhesion to Glass For Long Term Oil Control Property Extreme humidity resistance Good Re-Coatebility
TECHNICAL DATA:
GENERIC TYPE : Single pack Thermosetting Coating.
STORAGE STABILITY : 6 months from the date of manufacture under Recommended conditions. THEORETICAL COVERAGE CAPACITY : 80 sq.ft./kg @ 40 microns D.F.T. CURING TIME : 12 mins. at 160c or 10 mins. at 180c.
COMPONENTS:
Recommended D.F.T. : 40 microns. Application Method : Curtain coating. Hardness : 3 Hb-2 kg Presser. Recoatebility : After baking. Curing : 80% after curing : 90% after 24 Hrs. : 100% after 72 Hrs.
Pretreatment: Pretreatment is very important. Before curtain coating the surface must be clean, dry and free from oil/grease.
2 STORAGE:
DURATEK-8050 is basically a thermoset material. The storage room temperature should be less or equal to 28C. If temperature is more than 28C then polymerization (reaction) takes place.
Store DURATEK-8050 in dry place. The container should be packed tightly.
METHOD OF APPLICATION:
1. Application Viscosity should be 40 5 sec. by Ford cup-4 @ 25C. 2. Number of coats recommended 1 coat. 3. Coating Area Temperature - 30C or less.