You are on page 1of 1

Product : DSC Bulletin No.

: 15-DSC-E10
Model : Bulletin Date :
Buyer : ALL ECN Date :
SUBJECT : [ES25] Repair Guide ("P mode" Display)
Background :
This is the repair guide for ES25 camera.
Note :
4. Please the left button. Then you can change the message as a "Ptp Adj Disabled".
5. Turn off the camera and then, turn it on again.
SAMSUNG ES25
Application Date : Immediately
( Interchangeability Code : * I.C )
Location OLD (before) Parts NEW (changed) Parts *
No. SEC Code Description SEC Code Description I.C
Type A type B type C type D type E type F type
Interchange OLD Early OLD Early OLD Early OLD Early Parts Addition Parts deletion
Type Code (Parts) (Prod.) (Parts) (Prod.) (Parts) (Prod.) (Parts) (Prod.) (None New) ( Old Del. )
(* I.C ) NEW Late NEW Late NEW Late NEW Late
Application Reference ( O ) Only Defected sets ( ) Whole sets ( )
Attachment Schematic Diagram ( ) Component Lay-out ( ) Exploded View ( )
Mechanical Diagram ( ) None ( ) Others ( )
Product Month : Serial No. (~ from) :
Published by : YK YOU Checked by : YK YOU Approved by : YK YOU
Revision (V8.2 : March 10, 1998) ... Global Strategy Group. Tech.-Info. Suppot Part ( Pages : 1 of 1 )
Application model list
Reference : Please see the upper guide "How to cancel it.
Samsung ES25
Symptoms : This is the repair guide for ES25 camera. (When power on, "P mode" message displayed
30-Sep-10
2. Please the menu button for 3 sec.
Cause : Factory setting problem.
Solution : Please see the below information. (Remove the "P mode".)
How to Solve this problem.
Caution : Non
1. Press the down + shutter + Power (Firmware version check displayed)
3. You can find the "Ptp Adj Enabled" message.
SERVICE BULLETIN
ELECTRONICS

You might also like