~onfiguring Dual-Threshold Scheduling with HSUPA IUB_NodeB > Radio Layer > Locell Algorithm Parameters > MAC Parameters >
MACEPARA; CME batch modification center: Modifying Physical NodeB Parameters in Batches) to
sot Mac-e paramotors. Set Max Target RoT Difference Before and After IC to 0.
2, Reallocate the license of this feature on M2000 LMT, and set Allocated to 0.
3. Run the BSC6900 MML commandMOD UCELLCAC (CME single configuration: UMTS Coll
Configuration Express > Cell Parameters > Cell Oriented CAC Algorithm Parameters; CME.
batch moatfcation center: Moditving UMTS Cell Paramotors in Batchos), set UL IG LDC Optimized
‘Switeh in the specitied cell to OFF(OFF)
Example
U/netivation procedure
//operations at the NodeB
VACEPARA: LOCELL=0, SCHEDULEPARA-YES, MAXDELTAOFTARGETROT=2, EAGCH
NSERGCHECPARA-NO, SENICHPCPARA-NO, NSBIITCHPCPARA-NO;
//operations at the RNC
MOD UCBLLCAC: Cellid=1, UzIcLdcoptswiteh=oN;
/erification procedure
{/operations at the Nodes
SET VACEPARA: LOCELU-0, SCHRDULRPARA-YES, MAXDPITAOFTARGETROT-0, FAGCHPCPARA~NO, SERGCHPCPARA-NO,
NSERGCHECEAR?
(0, SEHICHPCPARA=NO, NSEHICHECPARA=NO;
12/18/2014 5:51 PM
PARR=NO, SERGCHPCPARA-NO,Configuring Dual-Threshold Scheduling with HSUPA