You are on page 1of 3

cc

HW (Center of Mass, Centroid)


1.) Determine the center mass for the region bounded by y = 2sin(2x), y = 0 on the interval [ 0 , pi/2 ]
2.) Find Mx, My and (xx , y) for the laminas of uniform density p bounded by the graph of (y = -x^2 + 4x + 2) and
(y= x + 2)
Wyne
Assignment:
1. Seven and a half foot-pounds of work is required to compress a spring 2 inches from its original length. Find
the work required to compress the spring an additional one-half inch. (Hooke's Law, *show solution)
2. A lunar module weighs 12 tons on earth's surface. How much work is done propelling the module from the
surface of the moon to a height of 50 miles? (Moon's radius is 1100 miles) and its force of gravity to be 1/6 that
of the earth. (Propulsion, show solution)
flx
Assignment:
1. Find the area bounded by the given sector: r=sqrt(theta), 0<=theta<=pi/2
2. Find the area of the ff graph from 0<=theta<=pi:

jason
assignment na malufet number one:
A rectangular plate of width 10 ft. and depth 8 ft. is submerged vertically in a tank of water with the upper edge
lying in the surface. Find the force due to water pressure on one side of the plate.
assignment na malufet number two:
The face of a dam adjacent to the water is inclined at an angle of 45 deg from the vertical..The face is a
rectangle of width 80 ft and slant height 40 ft.If the dam is full of water, find the total force due to water pressure
on the face.
jason

THQ:
1. a plate bounded by y=x squared and y= 3 is submerged in a water tank vertically with the upper edge lying
on the surface of the water. Find the total force due to water pressure on the plate.
2. A container in the shape of a right-circular cylinder having a base radius of 3 m is on its side at the bottom of
a tank full of water. The depth of the tank is 13 m. Find the total force due to water pressure on one end of the
container.
answer is in newtons. use p= 9810.
ken
quiz (work group)*madali lang basta kilala niyo si RON LARSON
1. A rectangular tank with a bas 4 ft by 5ft and a height of 4 t is full of water. The water weighs 62.4 ilbs/ft^3.
How much work is done in pumping teh water out over the top edge in order to empty. a) half of the tank b)all of
the tank
2. An open tank has a shape of a right circular cone. The tank is 16ft across and 12 ft high. How much work is
done in emptying the tank by pumping the water over the top edge?

cc
1. Determine the center of mass for the region bounded by y = x^3 and y = x
2. Find the center of mass/ centroid for the region bounded by y = cos x and y = sin x from x = 0 to x = pi/4

Bfelix
THQ
1. Find the area of the region that lies within the limacon r=1+2 cos theta and outside the circle r=2.
2. Find the area of a petal from a 5 petal rose.

Amin
Assignment:
Arc Length:
y= ln(sinx),( /4,3/4)
*// GUYS MALI PO UNG UNANG NAPOST, SIN PO HINDI COS, SORRY PO//
Area of Surface of Revolution:
y= 9-x^2, y-axis
Take Home Quiz:
Arc Length:
y= ln((e^(x )+1)/(e^(x )-1)), [ln 2, ln 3]
Area of Revolution:
y = 1/5x^5 + 1/12(x^3), 1 x 2, y-axis

You might also like