Professional Documents
Culture Documents
[48 marks]
Answer any four questions from this section.
1
The diagram below shows a solid with its base ABCDE on a horizontal plane.
Edges AF, BG, CM, DN, EI, JK and HL are vertical.
Planes IJP and KLMN are horizontal. Edges DC, FG, IJH, KL and NM are
parallel to edge AB. It is given that AF = BG = 4 cm, DN = CM = 7 cm,
BC = 7 cm, IH = FG = AB = 6 cm and EAB = ABC = 90.
Draw to full scale,
(a)
(b)
(c)
The diagram below shows a solid with its base ABCDE on a horizontal plane.
Edges AF, BG, CH, DI and EJ are vertical.
Edge AE is parallel to edge BC. The plane FGH is horizontal. It is given that
AE = 7 cm, DI = EJ = 6 cm, DE = IJ = 4 cm and BAE = AED = 90.
Draw to full scale,
(a)
(b)
(c)
(a) The diagram below shows a solid with its rectangular base ABFG on a
horizontal plane.
In the diagram below, a solid cuboid is joined to the above solid in (a) on
the vertical plane CFSP to form a combined solid.
The base of the combined solid ABCDEFG is horizontal and the plane
EFGLKSR is vertical. Draw to full scale,
(i)
(ii)
(a)
The diagram below shows a solid with its rectangular base ABCD on a
horizontal plane.
(a)
The diagram below shows a solid right prism with its rectangular base
ABGF on a horizontal plane.
In the diagram below, a solid cuboid is joined to the solid in (a) on the
vertical plane FGHIJ to form a combined solid.
(a)
The diagram below shows a solid with its base ABCDE on a horizontal plane.
Triangle PQT and trapezium QRST are inclined planes. Edges AP, BQ,CR, DS
and ET are vertical. Edge DE is parallel to edge CB. It is given that
BQ = CR = 6 cm, AP = ET = DS = 5 cm, CD = 4 cm, DE = 4 cm and
ABC = BCD = 90. Draw to full scale, the elevation of the solid on a
vertical plane parallel to AB as viewed from X.
(3 marks)
(b)
In the diagram below, a solid right prism is joined to the solid in (a) on the
vertical plane DGKL to form a combined solid.
The diagram below shows a solid with a base HIJK in the shape of a trapezium on
a horizontal plane.
Edges HP, IQ, JR and KS are vertical. Edges SR and KJ are parallel to edge HI.
It is given that HP = 6 cm, IQ = 2 cm and HIJ = 90. Draw to full scale,
(a)
(b)
(c)
The diagram below shows a solid with its base KLMN in the shape of a trapezium
on a horizontal plane.
Edges KP, LQU, MV and NRT are vertical. Edge KN is parallel to edge LM. It is
given that KN = 4 cm, LQ = 6 cm, NR = 4 cm, QU = RT = 1 cm and KLM = 90.
Draw to full scale,
(a)
(b)
(c)
The diagram below shows a solid with its base KLMN in the shape of a trapezium
on a horizontal table.
Edges AK, CGL, IM, DH and FN are vertical. Rectangle BCDE and triangle GHI
are horizontal planes. It is given that MN = 8 cm, AF = KN = 5 cm, AK = FN =
3 cm, BC = ED = 1 cm, CG = DH = 1 cm and LKN = KNM = 90.
Draw to full scale,
(a)
(b)
(c)
10
The diagram below shows a solid with its base PQRS in the shape of a trapezium
on a horizontal plane.
Answers
Paper 2
Section A
1
(a)
(b)
(i)
(ii)
(a)
(i)
(ii)
(a)
(i)
(ii)
(a)
(b)
(i)
(ii)
10