You are on page 1of 80

Learning experience powered by

Alcatel-Lucent University

Section 2
NE Operation

Module 7
ISAM as a L2-CC
TAC42050-HO09 Edition I2.0
7302-7360 ISAM
R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding
TAC42051_V1.1-SG Edition 2.0

271
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

Module objectives
Upon completion of this module, you should be able to:


Describe the different types of cross-connect modes (S-, C-, S/C-)







Unstacked C-VLAN cross-connect


S-VLAN cross-connect (C-VLAN transparency)
SC-VLAN cross-connect
VLAN translation

273
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

Table of Contents
1 Introduction
2 Cross
Connect
1 Introduction
1.1 General
overviewtypes
3 Cross
Connect
1.2 Cross-Connect overview
4 Cross
2 CrossConnect
Connect (MPLS)

Page

2.1 Cross connect model


3 Cross Connect types
3.1 Cross connect mode and VLAN stacking
3.2 C-VLAN cross connect
3.3 S-VLAN cross connect (C-VLAN transparency)
3.4 SC-VLAN cross connect
3.5 Protocol aware cross connect (residential cc)
3.6 Cross connect with protocol filtering
3.7 Cross connect VLAN translation
3.8 Summary: Cross- Connect mode
3.9 C-VLAN cross connect mode, things to consider
4 Cross Connect (MPLS)
4.1 Unified forwarding model for Access + Aggregation
4.2 MPLS Applications - Virtual Leased Line

275
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

7
8
9
10
11
14
15
16
17
18
19
20
21
22
23
24
25
26

7
10
14
24

1 Introduction

277
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

1 Introduction

1.1 General overview


Network
side

Anything
Eth - VLAN

L2

Anything
Eth (VLAN)
ATM/AAL
Phys layer

Anything
Eth (VLAN)
Phys layer

User
side

Eth-VLAN
7302 ISAM

layer 2 forwarding

Anything
Eth (VLAN)
GEM
Phys layer

CPE

 ethernet layer must be present at both sides


 encapsulation at CPE must include ethernet

Decision

Forwarding mode

Forwarding models
capable of handling
PPP traffic

L2

Intelligent Bridge (IB)


VLAN Cross-Connect (CC)
Enhanced iBridge

Forwarding models
capable of handling
DHCP traffic

278
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

In case the 7302 ISAM performs L2 forwarding, it means that the internal forwarding is
basically done on layer 2 information. The layer 2 is Ethernet, including the concept of VLANs.
In both layer 2 forwarding models (intelligent bridge as well as cross-connect), the ISAM can
accept tagged frames coming from a user. The operator can configure exactly which tag is to be expected
on the bridge port and frames carrying another tag will be discarded (filter).
In case of VLAN translation, the user sends tags that are recognized, but only have a local
meaning and will immediately be translated into a network vlan.
In case of cross-connect, it is possible to have C-VLAN transparency (where only the S-VLAN
is configured in the ISAM). In that case, the user can send no matter what C-VLAN. The ISAM will not filter
based on C-VLAN. See section on cross-connect.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

1 Introduction

1.2 Cross-Connect overview


VLAN per subscriber
 One(1) unique VLAN per subscriber
VLAN per user
Home
NW

Aggregation
Network

Access
Network

Voice

IP
backbone
Network

VLAN user 1
VLAN user 2

Internet

VLAN user 3
VLAN user 4

Switch

VLAN user 5

Video
NEW

VLAN user 6

73xx
IP Router
Ethernet switch
279
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

2 Cross Connect

2 7 10
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

2 Cross Connect

2.1 Cross connect model


Transparent bit pipe
 Conceptually very similar to classical ATM PVC cross-connect

One customer-VLAN (C-VLAN) contains strictly one user


 User port or user logical port or user on subtended interface
 Two variants: residential & business cross-connect

One user can be cross-connected to multiple VLANs


 in this case user frames need to be tagged

2 7 11
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

In cross-connect mode, the ISAM does not care about MAC addresses. The model is conceptually identical to
ATM cross-connect.
Each ATM PVC which is configured in a cross-connect mode is mapped on a unique VLAN.
Each Ethernet frame on that ATM PVC is transported transparently to this VLAN, and frames received over the
Ethernet interface with the VLAN-tag are forwarded to the PVC identified by this VLAN-tag.
It is clear that a VLAN in cross-connect mode also has the two basic properties which differentiate Intelligent
Bridging from standard bridging: no user-to-user communication is possible in the ISAM and broadcast storms
are avoided. This is because there is only a single user in case of a VLAN cross-connection.
One bit pipe per subscriber since the subscriber is identified by:
 Network
 User

side: Single or stacked (see later) VLAN tag

side: PVC for ATM or DSL port for EFM

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

2 Cross Connect

2.1 Cross connect model [cont.]


Transparent pipe for unicast, multicast and broadcast traffic
 any protocol : IP, PPP, IPX, AppleTalk,...

CPE

Internet

ISP2
CPE

E-MAN
Network

ISP1

IP

CPE

BAS

CPE

CPE

73xx ISAM

2 7 12
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

In VLAN cross-connect mode one Customer VLAN (C-VLAN) contains only one user port.
Tagged frames supported for cross-connect mode.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

2 Cross Connect

2.1 Cross connect model [cont.]


Customer identified by access port
 1 VLAN = 1 VP/VC
 or even multiple VLANs per PVC

 MAC-addresses are not used in the forwarding decision

Security
 IP edge device knows the line id
 Edge can limit number of PPP sessions per line (VP/VC)

Separation of broadcast traffic per user


Number of MAC-addresses can be limited
 enable self-learning on the DSL port

2 7 13
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

No customer segregation
In the case of cross connect mode, user-identification can be easily done on basis of this VLAN, given there is
a VLAN per user or DSL-line (even per ATM PVC). This user-identification feature should then be available in a
device higher up in the network: e.g. in a BAS where these VLANs are terminated. So no problem in case of
dual MAC addresses, as they are in a different VLAN anyway.
No user to user communication within ISAM
 Note:

this requirement is applicable for IB mode, because ASAM, user or subtending ports may be in the
same VLAN.

 The

requirement is fulfilled for cross-connections by construction, as the isolation is achieved by the one
to one port assignment (from a network interface to one user, ASAM or subtending port) of the VLANs.

All responsibilities are moved to the IP edge.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

3 Cross Connect types

2 7 14
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

3 Cross Connect types

3.1 Cross connect mode and VLAN stacking


Scalability issue:
 VLAN technology only 4000 VLAN-ids

Scalability issue is solved by VLAN stacking:


 Customer VLAN: C-VLAN
 Service provider VLAN: S-VLAN

Cross connect types:


 C-VLAN cross connect
 S-VLAN cross connect (C-VLAN transparency)
 SC-VLAN cross connect

2 7 15
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

In the upstream direction, the incoming user port without the MAC DA is sufficient for the 7302 ISAM to
identify the outgoing upstream port and the C-VLAN tag. This C-VLAN is the port-based default VLAN
configured for this user port.
In the downstream direction, only the C-VLAN (without the MAC DA) is sufficient for the 7302 ISAM to identify
the outgoing user port.
A particular VLAN ID can be configured only once:
 on

any of the user ports in the 7302 ISAM

 over

all 7302 ISAMs in the complete Ethernet network to which the 7302 ISAM is connected

In order to support more VLAN cross connects, VLAN stacking will be supported if VLAN Dual Tagging Mode is
Enabled. VLAN-stacking introduces another VLAN-layer. One outer VLAN can bundle a number of inner
VLANs, similar to one LAN bundling a number of VLANs. This way, one VLAN, called the Service-VLAN or SVLAN, bundles a number of smaller VLANs, called Customer-VLANs or C-VLANs. More details concerning VLAN
stacking modes are discussed later in the presentation.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

3 Cross Connect types

3.2 C-VLAN cross connect


Stack type: unstacked C-VLANs
#3

#1
Ethernet
#2

CPE

VLAN 333
VLAN 444
VLAN 555
#4
#1






#2

#4

1 user port per Vlan


VLAN 333 is sent untagged towards CPE
Untagged frames are tagged with pvid (e.g. 333)
VLAN IDs unknown for that port are discarded

2 7 16
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Unstacked C-VLAN cross-connect can be used for residential users.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

CPE

3 Cross Connect types

3.3 S-VLAN cross connect (C-VLAN transparency)


Stack type: S-VLANs
C
#1
S

#1

#2

S C

S-VLAN 400 - pvid


S-VLAN 401
SC
S

S C

#2
C

#3

#3
S

SC

SC

CPE

SC

S-VLAN 402

CPE

 1 or more S-VLANs per bridge port


 User is allowed to send tagged traffic (even S-tags!)
 We ignore the C-VLAN ID:
 untagged means here: no S-tag present (C-tag can be present, though!)
 single-tagged means: S-tag present (and maybe also C-tag)

2 7 17
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

S-VLAN cross-connect (C-VLAN transparency) is interesting for business users. It can offer a VPN-like service.
 e.g.

tag 400 used between business sites 1 and 2 and tag 401 used between sites 1 and 3 etc.

S-VLAN cross-connect is considered a single-tag mode, just like unstacked C-VLAN cross-connect.
The following configuration is typically used by business users:
 CPE

with multiple LAN interfaces

 LAN

interface carries either untagged or single tag traffic

 LAN

port traffic is encapsulated into an S-tag before being forwarded to the network

To fulfill with these needs currently ISAM offers (extension of the VLAN CC behaviour in order to support
configurations that are typically used for business subscribers):
Tunnel mode (since frames are forwarded transparently in the tunnel): S-VLAN CC with N tags @ UNI, N+1
tags @ NNI (add 1 tag unconditionally)
Mapped mode (the outer tag -independently of whether there more than 1 tags present in the packet- is
checked against the list of allowed tag and if allowed, forwarded):
 C-VLAN
 S/C

CC with N tags @ UNI / NNI, Outer tag mapping

VLAN CC with N tags @ UNI, N+1 tags @ NNI, Outer tag mapping

 S-VLAN

CC with N tags @ UNI / NNI, Outer tag mapping (backwards compatibility)

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

3 Cross Connect types

3.4 SC-VLAN cross connect


Stack type: stacked C-VLANs

sc

#1

Ethernet

S-VLAN
s c #2

c
#1

sc

#2

CPE

#3

#4

S-VLAN

#4

CPE

CPE






Create and Associate Stacking VLAN (from the AMS or CLI)


C-VLAN IDs unknown to a bridge port are discarded
C-VLAN ID is unique within S-VLAN
Multiple bridge ports can share the same S-VLAN

2 7 18
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

SC-VLAN cross-connect can be interesting for both business and residential users.
SC-VLAN cross-connect is a dual tag mode (you configure the system settings for VLAN on the ISAM to dual tag
and all VLAN associations use dual tags).
With SC-VLAN cross-connect, the same S-tags can be used for different C-tags. Likewise, a C-tag can be
reused in combination with different S-tags.
E.g. the stacking VLAN can identify an ISAM and the C-VLAN is unique on that ISAM (e.g. each user gets a CVLAN id that reflects the position of the port in the ISAM  VLAN 101 = LT 1 port 1; VLAN 1648 = LT16 port 48)
 Make sure that those VLAN-ids dont occur for a residential bridge or layer 2-terminated VLAN on the same
ISAM! In that case it will not be possible to reuse the VLAN-id.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

3 Cross Connect types

3.5 Protocol aware cross connect (residential cc)


 Protocol aware for 802.1x, DHCP, IGMP, PPPoE
#1

#2

Ethernet

CPE
VLAN 333

#3

VLAN 444

CPE
#1

#3

 Support for residential bridge alike features:


DHCP option 82
IGMP control channel (multicast applications with cross VLAN)
PPPoE Relay tag

2 7 19
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

In a residential context, it is usually not desired to keep the VLAN CC fully transparent, so in that case the
operator can be make the VLAN CC protocol aware (also called a residential cross connect).
The protocol-aware VLAN cross-connect mode has the following features:
 xDSL

interfaces types:

 ATM:


Bridged encapsulation carrying both PPPoE and IPoE traffic

PPPoA with the required interworking to convert the traffic to PPPoE

IPoA with the required interworking to convert the traffic to IPoE

Encapsulation auto-detection

 Ethernet:

VDSL EFM, VDSL2 EFM

 Subscriber


identification:

A single (C-VLAN) or a stacked (S-VLAN/C-VLAN) VLAN tag towards the network is associated with
either a PVC (in the case of ATM) or a DSL port (in the case of EFM)

Optional addition of the PPPoE relay tag in the PPPoE control messages

Optional addition of the DHCP Option 82 in the DHCP messages

 No

MAC address or IP address anti-spoofing since the scope of these addresses remain limited within the
protocol-aware cross-connect mode. The IP edge router or the BRAS must keep the freedom of allocating
them as they want. This control will typically be performed centrally.

 Policing

per PVC (ATM) or DSL line (EFM)

 Local

multicast handling: driven by IGMP. When you configure an IGMP control channel on a bridge port
or on a subscriber VLAN where you have a cross-connect network VLAN associated, the cross-connect
becomes protocol-aware!

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

3 Cross Connect types

3.6 Cross connect with protocol filtering

#1 PPPoE

#2 IPoE

Ethernet
VLAN 333
VP/VC : 8/36

CPE

VLAN 444

CPE
#1

#2

PPPoE traffic

IPoE traffic

2 7 20
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

By adding some protocol awareness in the data plane, the ISAM can provide cross-connect forwarding based
on protocol information within the ethernet frame similar to the iBridge model, i.o.w using protocol filtering.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

3 Cross Connect types

3.7 Cross connect VLAN translation

User X

VLAN 333

#1
Ethernet

User Y
#2

VLAN 444

#3
#2

CPE

User Z

VLAN 555

#1

CPE

CPE

#3

VLAN 111

2 7 21
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Why VLAN translation?


 In

case a separate VLAN needs to be used to identify a service, emulating the PVC (EFM, VDSL) we can
decouple the subscriber interface from the forwarding interface so that the user side vlan can be the
same for all users even in case of 1:1 forwarders like the Cross-connect model.

This is made possible by defining 2 vlans on a bridge port :


a

network vlan and a subscriber (user) VLAN.

 Note:

it even goes further  also in case of higher layer forwarding models (routing there can be a
subscriber vlan! In that case there is no network vlan associated to the subscriber vlan (see in another
module)

If both are different this means that VLAN translation (substitution) will take place.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

3 Cross Connect types

3.8 Summary: Cross- Connect mode


ISAM

11
11

CC: 1-1

NetVlan 11
11

21

CC: 1-1

NetVlan 21

Ethernet

1231

12

CC: 1-1

NetVlan 31,12
2331

CC: 1-1

11

NetVlan 31, 23
51

CC: 1-1

4
5

NetVlan 51

2 7 22
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

All the upstream frames can be untagged, single tag or with several tags (for example, business services). If
the frame has several tag, the ISAM only analyzes the outer tag to forward it.
there are 5 different combinations in the cross-connect forwarding mode:
1. Not Adding Vlan Tag in upstream. User Vlan Specific and not translated
2. Not Adding Vlan Tag in upstream. User Vlan Specific and translated
3. Adding Vlan Tag in upstream. User Vlan Specific and not translated
4. Adding Vlan Tag in upstream. User Vlan Specific and translated
5. Adding Vlan Tag in upstream. Any User Vlan and not translated

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

3 Cross Connect types

3.9 C-VLAN cross connect mode, things to consider


Scalability issue:
 VLAN technology only 4000 VLAN-ids (solved using vlan-stacking)
 Switches learn all MAC-addresses of all end-users
 IP edge learns all MAC-address<->IP-address of all end-users in ARP table

IP1
MAC1

VLAN 100

HSIA

VLAN 101

IP edge

BR

VLAN 100

VLAN 102

VLAN 101

VLAN 103

VLAN 102

BTV

IP2
MAC2

CPE
Bridge

IP1
IP2
IP3
IP101

IP3
MAC3

ISAM-1

VLAN 103

ARP
VoD

CC

CPE
Bridge

VLAN 1000
VLAN 1001
VLAN 1002
VLAN 1003

MAC

VoIP
2 7 23
NE Operation ISAM as a L2-CC
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

IP102
MAC102
IP103
MAC103

MAC1
MAC2
MAC3
MAC101

IP101
MAC101

CC
ISAM-2

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO09 Edition I2.0

IP201
MAC201

CPE
Bridge

IP202
MAC202
IP203
MAC203

Learning experience powered by


Alcatel-Lucent University

Section 2
NE Operation

Module 8
Cross Connect IACM
TAC42050-HO10 Edition I2.0
7302-7360 ISAM
R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding
TAC42051_V1.1-SG Edition 2.0

281
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

Module objectives
Upon completion of this module, you should be able to:
 Retrieve VLAN information on the system
 Associate a VLAN in cross-connect mode to a port on the IACM
 Unstacked C-VLAN cross-connect
 S-VLAN cross-connect (C-VLAN transparency)
 SC-VLAN cross-connect
 VLAN translation

283
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

Table of Contents
1 Cross Connect
2 Cross
Connect Vlan Association (AMS)
1 Cross Connect
1.1 The Connect
ISAM as a two
stage box
3 Cross
Vlan
Association (CLI)
1.2 Cross connect mode in 7302 ISAM
4 Hands
on
2 Cross Connect
Vlan Association (AMS)
2.1 CC VLAN set-up
5 Annex
A: of
Basic
GPON QoS configs
2.2 Creation
C-VLAN
2.3 Creation of C-VLAN
2.4 Creation of C-VLAN
2.5 Show VLANs
2.6 Create VLAN association on bridge port
2.7 Define PVID on bridge port
2.8 Creation S-VLAN CC
2.9 Creation S-VLAN CC
2.10 Show VLANs
2.11 Create VLAN association on bridge port
2.12 Define PVID on bridge port
2.13 Create VLAN association on bridge port
2.14 Create VLAN association on bridge port
2.15 Define PVID on bridge port
2.16 Define PVID on bridge port
2.17 Creation SC-VLAN CC on NE. 1- create S-Tag
2.17 Creation SC-VLAN CC on NE. 2- create SC-tag
2.18 Show VLANs
2.19 SC-Type XC VLAN association on bridge port
285
COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.
2.20 Cross
Define
PVID on bridge port
NE Operation
Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding
2.21 CC VLAN association with VLAN translation
2.22 CC VLAN association with VLAN translation
2.23 Configuration of FDB aging timer
3 Cross Connect Vlan Association (CLI)
3.1 C-VLAN cross connect via CLI
3.2 S-VLAN cross connect via CLI
3.3 Stacked VLAN cross connect via CLI
3.4 Cross-connect with vlan-translation
3.5 VLAN related show commands
3.6 Delete a VLAN
4 Hands on
4.1 Retrieval exercises
4.2 CC Vlan set up
5 Annex A: Basic GPON QoS configs
5.1 Ingress QoS profile
5.2 Bandwidth profile

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

Page
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
29
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
54
59
60
61

7
10
38
45
59

Table of Contents [cont.]

Page

286
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

1 Cross Connect

287
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

1 Cross Connect

1.1 The ISAM as a two stage box


will do ethernet switching
 on the NT xHUB
 on the LT - IWF

ethernet switch = forwarding engine


 interworking = ATM  ethernet

atm

gem

ethernet (encapsulated)
ethernet

ethernet

xDSL
NT

IWF

FW Engine

FW Engine

xHUB

CPE

LT

GPON

P2P-eth
288
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

1 Cross Connect

1.2 Cross connect mode in 7302 ISAM


LT Cross connect mode configurable
 C-VLAN cross connect
 S-VLAN cross connect
 SC-VLAN cross connect

External
ethernet
links

ASAM
link

xHUB

30

1-16

30

VP/VC

VLAN

8/35

100

8/37

200

LT
30

100

VLAN

200

289
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

FW Engine

100

FW Engine

200

Ph port
EFM

Ph. Port

8/35
8/37

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Remember, MAC-addresses are not used in the forwarding decision.


In the upstream direction, the incoming user port (without the MAC DA) is sufficient for the 7302 ISAM to identify the outgoing
upstream port and the C-VLAN tag. This C-VLAN is the port-based default VLAN configured for this user port.
In the downstream direction, only the C-VLAN (without the MAC DA) is sufficient for the 7302 ISAM to identify the outgoing user
port.
A particular VLAN ID can be configured only once:
 on any of the user ports in the 7302 ISAM
 over all 7302 ISAMs in the complete Ethernet network to which the 7302 ISAM is connected
In Cross-connect mode different models exist:
 C-VLAN cross-connect: Straightforward VLAN cross-connect model where one or more VLANs at the EMAN side are
associated with a given PVC at the user side

CC on IACM : only one end-user port (PVC or bridge port EFM) associated to a specific C-VLAN

CC on shub: since theres only one user associated to a specific C-VLAN on the xHUB, one ASAM-link and one or more
network ports are associated to the VLAN
 S-VLAN at the EMAN side is associated with a PVC at the user side, the C-VLANs carried within the S-VLAN are then passed
transparently to the end user.

CC on IACM: only one end-user port (PVC or bridge port EFM) associated to a specific S-VLAN

CC on SHUB: since theres only one user associated to a specific S-VLAN on the xHUB one ASAM-link and one or more
network ports are associated to the S-VLAN
 S-VLAN/C-VLAN cross-connect mode: PVC C-VLAN mapping, where the S-VLAN tag can be used by the EMAN as routeidentifier towards the ISAM

CC on IACM : Different end-user ports (PVC or bridge port EFM) can be associated to a specific S-VLAN.
The C-VLAN identifies the user-port

CC on SHUB: since theres can be many users associated to a specific S-VLAN on the xHUB all ASAM-link and one or
more network ports are associated to the VLAN

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2 8 10
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.1 CC VLAN set-up


VLAN set-up:

 Create VLAN for


service to be deployed

  create VLAN
 creation of cross connect
VLAN on IACM

 Add ports to VLAN

  Add port to VLAN


 on LTs

Via AMS
 Different versions of one VLAN
possible

For GON, there is already


some QoS stuff
to explain and configure:
see Annex A

2 8 11
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Here youll learn how to:


 Distinguish
 Create
 Add

different forwarding models and choose the right VLAN mode for a certain forwarding model

a VLAN on IACM using 5520AMS

ports to a VLAN

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.2 Creation of C-VLAN

Network

Select NE

C-VLAN = 700

Infrastructure
Layer2
VLAN
See next slide

Create VLAN

2 8 12
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

5520AMS doesnt use templates for VLANs. The only way to configure VLANs is on the NE itself.
For a Cross Connect C-VLAN, the S-TAG = 0.
C-VLAN:
#3

#1
Ethernet

#2
CPE

VLAN 333
VLAN 444
#4

VLAN 555

CPE

#1

#2

#4

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.3 Creation of C-VLAN

Mode = CC

2 8 13
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Not all parameters can be configured here already. You can configure e.g. static MAC addresses afterwards.
L2CP frames transparency
 Enabled

per VLAN CC: all L2CP frames (XSTP, LACP, EFM OAM, 802.1x, GXRP,..) transparently forwarded

through the VLAN CC

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.4 Creation of C-VLAN

PPPoE relay tag

DHCP option 82

protocol filter
(PPPoE / IPoE)
broadcast control

2 8 14

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

NE Operation Cross Connect IACM


7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

If the PPPoE relay tag or DHCP option 82 are available, this vlan is protocol aware.
If the PPPoE or IPoE are selected it will be a cross-connect with protocol filtering.
Protocol aware for (802.1x, DHCP, IGMP, PPPoE):
#1

#2

Ethernet
CPE
VLAN 333

#3

VLAN 444

Protocol filtering:
CPE
#1

#3

#1 PPPoE

#2 IPoE

VLAN 333Ethernet
VP/VC : 8/36

CPE

VLAN 444
CPE
#1
PPPoE traffic

IPoE traffic

#2

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.5 Show VLANs

2 8 15
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.6 Create VLAN association on bridge port


Network

Select configured bridge port


Create
VLAN Association

2 8 16
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

There are 3 possible Cross Connect VLANs:


 C-VLAN

CC  S_VLAN Id = 0

 S-VLAN

CC  C_VLAN Id = 0

 SC-VLAN

CC  S_VLAN Id and C_VLAN id = 0

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.7 Define PVID on bridge port

2 8 17
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.8 Creation S-VLAN CC

Network

S-VLAN = 600

Select NE
Infrastructure
Layer2
VLAN

See next slide

Create VLAN

2 8 18

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

NE Operation Cross Connect IACM


7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

As you already know, S-VLAN CC modes offers the capability to transfer subscriber traffic in pipes. Two S-VLAN
CC mode variants are supported in the ISAM: the S-VLAN Tunnel CC and the S-VLAN Mapped CC.
-In Tunnel Mode, the ISAM systematically adds a VLAN-tag to frames originating from the subscriber. This mode is
enabled by configuring an S-VLAN Port as PVID.
-In Mapped Mode, the ISAM considers subscriber traffic as if already inside a tunnel originated at subscriber side. In
Mapped mode, the ISAM just extends the subscriber tunnel further to the EMAN without adding any extra VLAN-tag.
5520AMS doesnt use templates for VLANs. The only way to configure VLANs is on the NE itself.
For a Cross Connect S-VLAN, the C-TAG = 0.
S-VLAN:
-S_VLAN: 400 (Tunnel Mode)
-S_VLAN: 401 (Mapped Mode)

#2

#1
S

#1

S C

S-VLAN 400 - pvid


S-VLAN 401
S C
S

#2

S C

#3

#3
S

S C

S C

CPE

S C

S-VLAN 402
CPE

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.9 Creation S-VLAN CC

mode: CC

2 8 19
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.10 Show VLANs

2 8 20
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.11 Create VLAN association on bridge port


Network

Select configured bridge port


Create
VLAN Association

2 8 21
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.12 Define PVID on bridge port

2 8 22
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

The Vlan id is the same as the default Vlan therefore this S-Vlan is configured as a tunnel mode. I.e. ISAM adds an
extra-tag to all the frames received from the subscriber.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.13 Create VLAN association on bridge port

Network

Select configured bridge port


Create
VLAN Association

2 8 23
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

There are 3 possible Cross Connect VLANs:


 C-VLAN

CC  S_VLAN Id = 0

 S-VLAN

CC  C_VLAN Id = 0

 SC-VLAN

CC  S_VLAN Id and C_VLAN id = 0

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.14 Create VLAN association on bridge port

2 8 24
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.15 Define PVID on bridge port

2 8 25
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.16 Define PVID on bridge port

2 8 26
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.17 Creation SC-VLAN CC on NE. 1- create S-Tag

Network

Select NE

S-VLAN = 800
C-VLAN = 0

Infrastructure
Layer2
VLAN

See next slide

Create VLAN

2 8 27
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

For a Cross Connect C-VLAN, the S-TAG = 0.


For a Cross Connect S-VLAN, the C-TAG = 0.

S-VLAN
#2

s c

#1

Ethernet

#1
s c

s c

#2

CPE

#3

#4
c

S-VLAN

#4

CPE

CPE

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.16 Creation SC-VLAN CC on NE. 1- create S-Tag [cont.]

mode: L2 Terminated

2 8 28
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.17 Creation SC-VLAN CC on NE. 2- create SC-tag

Network

Select NE

S-VLAN = 800
C-VLAN = 2000

Infrastructure
Layer2
VLAN

See next slide

Create VLAN

2 8 29
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.17 Creation SC-VLAN CC on NE. 2- create SC-tag [cont.]

mode: CC

2 8 30
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.17 Creation SC-VLAN CC on NE. 2- create SC-tag [cont.]

PPPoE relay tag

DHCP option 82

protocol filter
(PPPoE / IPoE)
broadcast control

2 8 31
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.18 Show VLANs

2 8 32
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.19 SC-Type XC VLAN association on bridge port

2 8 33
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.20 Define PVID on bridge port


Modify VLAN association  Object details view

2 8 34
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

PortVID = Default VLAN

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.21 CC VLAN association with VLAN translation

2 8 35

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

NE Operation Cross Connect IACM


7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

E.g. you configure a CC VLAN association with VLAN translation on a VDSL EFM bridge port. The modem is
configured in such a way that it generates tagged traffic, e.g. local subscriber VLAN 750. This subscriber VLAN is
translated into the network C-VLAN CC 300.
 All

frames returned to the subscriber should again have VLAN tag 750.
Configure that the frames returned to the subscriber should be single-tagged.

In this slide, the vlans are created.

User X

VLAN 333

#1
Ethernet

CPE

User Y
#2
CPE

VLAN 444
User Z
VLAN 555
#3

CPE
#1

#2

#3
VLAN 111

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.22 CC VLAN association with VLAN translation


Network

Select configured bridge port


Create

local subscriber VLAN

VLAN Association

select network
VLAN

2 8 36
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Vlans association (with translation) to the bridge port.


E.g. you configure a CC VLAN association with VLAN translation on a VDSL EFM bridge port. The modem is
configured in such a way that it generates tagged traffic, e.g. local subscriber VLAN 750. This subscriber VLAN is
translated into the network C-VLAN CC 300.
 All

frames returned to the subscriber should again have VLAN tag 750.
Configure that the frames returned to the subscriber should be single-tagged.

VLAN Forwarding Mode:


VLAN Without Translation: if Subscriber VLAN and Network VLAN have the same value (Subscriber
part is then greyed out)
VLAN With Translation: if Subscriber VLAN and Network VLAN have a different value or when
configuring a SC-VLAN Cross Connect
NO VLAN Forwarding

Tagging Parameters:

Untagged to remove the VLAN Id on egress to the customer

Single Tagged to have the C-tag added to the customer (CPE is configured to use tagged frames)

Priority Tagged: VLAN value set to zero, p-bit filled in

The QoS part will be discussed in the corresponding chapter.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

2 Cross Connect Vlan Association (AMS)

2.23 Configuration of FDB aging timer

LT default timer

VLAN timer (if this services needs a


different timer to the LT default timer)

2 8 37
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

From R3.5  VLAN specific aging time can be set. If set, this value will override the IACM Layer2 - Ethernet System
Parameters Forwarding Database Aging Time. If on the other hand the default value 1 is left, the IACM system
parameter is used.
To avoid problems the LT default timer must be matched up the SHUB aging timer.
Remember, MAC-addresses are not used in the forwarding decision.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

3 Cross Connect Vlan Association (CLI)

2 8 38
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

3 Cross Connect Vlan Association (CLI)

3.1 C-VLAN cross connect via CLI


Create vlan on IACM :
 configure vlan id <VID> mode cross-connect name <name>

C-VLAN CC-association on bridge port:


 configure bridge port 1/1/./.. vlan-id <C-VID>
 pvid <C-VID>

2 8 39
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

ASAM-core:
 configure

vlan id <C-VID> mode cross-connect

 configure

bridge port <R/S/Slot/> vlan-id <vlan id>

Optional parameters:

[no] vlan-scope: local (used for vlan translation where related vid is subscriber vlan)
default = network (no vlan translation)

[no] pvid: default vlan id for untagged frames default = stacked:0:4097 (= no pvid)

[no] default-priority: priority to be set in upstream frames default = 0

[no] mac-learn-off: disable self learning of mac address

[no] max-unicast-mac : max unicast mac addresses default = 1

[no] accept-frame-type: accept frame types

default = untagged

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

3 Cross Connect Vlan Association (CLI)

3.2 S-VLAN cross connect via CLI


Create vlan on IACM :
 configure vlan id stacked:<S-VID>:0 mode cross-connect name <name>

C-VLAN CC-association on bridge port:


 configure bridge port 1/1/./.. vlan-id stacked:<S-VID>:0
 pvid stacked:<S-VID>:0

2 8 40
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

S-vlan cross-connect is also known as C-vlan transparency. You can ignore the C-vlan entirely and simply add
an S-tag. Traffic with only a C-tag is regarded as untagged.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

3 Cross Connect Vlan Association (CLI)

3.3 Stacked VLAN cross connect via CLI


Create stacking vlan on ASAM-core
 configure vlan id stacked:<S-VID>:0 mode layer2-terminated

Create cross-connect vlan on ASAM-core :


 configure vlan id stacked:<S-VID>:<C-VID> mode cross-connect name
<name>

C-VLAN CC-association on bridge port:


for all releases:
 configure bridge port <1/1/./..> vlan-id stacked:<S-VID>:<C-VID>
 pvid stacked:<S-VID>:<C-VID>

or from R3.3 only:


 configure bridge port <R/S/Slot/> vlan-id <subscriber C-VID> vlan-scope
local network-vlan stacked:<S-VID>:<network C-VID>
 pvid < subscriber C-VID>

2 8 41
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

For VLAN translation (note that the stacked C-vlan cross-connect is already an example of vlan translation!) 
see further
The stacking VLAN is a shared VLAN. Therefore, all LT-ports (ASAM-links) will have the VLAN association.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

3 Cross Connect Vlan Association (CLI)

3.4 Cross-connect with vlan-translation


Besides creation of vlan(s) (cfr network-vlan) as described in former
slides, the vlan-association is as follows:
for C-VLAN CC:
 configure bridge port <R/S/Slot/> vlan-id <subscr-C-VID> vlan-scope local
 network-vlan <network-S-VID>
 pvid <subscr-S-VID>

for S-VLAN CC:


 configure bridge port <R/S/Slot/> vlan-id <subscr-C-VID> vlan-scope local
 network-vlan <network-S-VID>
 pvid <subscr-S-VID>

for S/C VLAN CC:


 configure bridge port <R/S/Slot/> vlan-id <subscr-C-VID> vlan-scope local
 network-vlan stacked:<S-VID>:<C-VID>
 pvid <subscr-C-VID>

2 8 42
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

The subscriber vlan is the one used by the subscriber to tag frames.
For C-VLAN cross-connect:
 Configure

bridge port X vlan-id <subscr-C-VID> vlan-scope local

 Configure

bridge port X vlan-id <subscr-C-VID> network-vlan <network-C-VID>

 Configure

bridge port X pvid <subscr-C-VID>

For S-VLAN cross-connect:


 Configure

bridge port X vlan-id <subscr-S-VID> vlan-scope local

 Configure

bridge port X vlan-id <subscr-S-VID> network-vlan <network-S-VID>

 Configure

bridge port X pvid <subscr-S-VID>

For S/C-VLAN cross-connect (stacked VLAN cross-connect):


 Configure

bridge port X vlan-id <subscr-C-VID> vlan-scope local

 Configure

bridge port X vlan-id <subscr-C-VID> network-vlan stacked:<S-VID>:<C-VID>

 Configure

bridge port X pvid <subscr-C-VID>

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

3 Cross Connect Vlan Association (CLI)

3.5 VLAN related show commands


Selection of multiple show vlan commands
 on IACM:
 all bridge ports connected to C- vlan:
 show vlan cross-connect <VLAN ID>
 all MAC-addresses learned or configured on that port:
 show vlan bridge-port-fdb
 show vlan bridge-port-fdb <bridge port id>
 all MAC -adresses learned on all ports of that vlan:
 show vlan fdb-board fdbid <VLAN ID>

2 8 43
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

3 Cross Connect Vlan Association (CLI)

3.6 Delete a VLAN


you cant delete a VLAN that has ports attached it
 and you cant delete the VLAN-association with VLAN-id = PVID
 configure bridge port <R/S/slot/...> no pvid
(if vlan id=pvid)
 configure bridge port <R/S/slot/...> no vlan-id <vlan id>

delete VLAN on ASAM-CORE


 configure vlan no id <VID>

2 8 44
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Before you can delete a VLAN, you need to be certain that there are no member ports to this VLAN anymore:
 Example


for logical user port:

configure bridge port 1/1/4/1:8:35 no vlan-id 150

You cant delete the VLAN if the VLAN-id = PVID. You have to delete the pvid first.
 E.g.

configure bridge port 1/1/4/1:8:35 no pvid

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

4 Hands on

2 8 45
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

4 Hands on

4.1 Retrieval exercises


1. What is the forwarding mode of VLAN 333 (cross-connect, bridged, )?
Check with AMS and CLI

2. What are the ports assigned to VLAN 333 on the ASAM-CORE and on the
xhub. Explain what you see

3. Is there a service defined on the AMS for any of the cross-connect


modes? Explain for which cross-connect mode this is useful and why

2 8 46
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

4 Hands on

4.1 Retrieval exercises [cont.]


4. Explain the configuration on port TRAINING -c on VP/VC 8/35 with AMS
and CLI. In the upstream? In the downstream?

5. What happens when the end-user sends a frame with VLAN tag 333?
6. What happens when the end-user sends a frame with VLAN tag 444?
2 8 47
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

4 Hands on

4.1 Retrieval exercises [cont.]


7. What happens when the end-user sends a frame with VLAN tag 555?

8. What happens when the end-user sends an untagged frame?

9. What happens when a frame with VLAN tag 333 is send towards the
end user?

10.What happens when a frame with VLAN tag 444 is send towards the
end user?

11.What happens when a frame with VLAN tag 555 is send towards the
end user?

2 8 48
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

4 Hands on

4.1 Retrieval exercises [cont.]


12.What is the forwarding mode of VLAN 400 (cross-connect, bridged, )?
Check with AMS and CLI
13.What are the ports assigned to VLAN 400 on the ASAM-CORE and on
the xhub. Explain what you see
14.Explain the configuration on port TRAINING c on VP/VC 8/36 with
AMS and CLI. What happens in the upstream? What happens in the
downstream?

2 8 49
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

4 Hands on

4.1 Retrieval exercises [cont.]


15.What happens when the end-user sends a frame with VLAN tag 400?

16.What happens when the end-user sends a frame with VLAN tag 500?

17.What happens when the end-user sends an untagged frame?

18.What happens when a frame with S-VLAN tag 400 and C-VLAN tag 444
is send towards the end user?

19.What happens when a frame with S-VLAN tag 500 and C-VLAN tag 400
is send towards the end user?

20.What happens when a frame with VLAN tag 400 is send towards the
end user?
2 8 50
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

4 Hands on

4.1 Retrieval exercises [cont.]


21.What is the forwarding mode of VLAN 500 (cross-connect, bridged, )?
Check with AMS and CLI
22. What are the ports assigned to VLAN 500 on the ASAM-CORE and on
the xhub. Explain what you see
23.Explain the configuration on port TRAINING c on VP/VC 8/37 with AMS
and CLI. In the upstream ? In the downstream?

2 8 51
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

4 Hands on

4.1 Retrieval exercises [cont.]


24.What happens when the end-user sends a frame with VLAN tag 123?

25.What happens when the end-user sends a frame with VLAN tag 500?
26.What happens when the end-user sends a frame with VLAN tag 234?

27.What happens when the end-user sends an untagged frame ?


28.What happens when a frame with S-VLAN tag 500 and C-VLAN tag 123
is send towards the end user?

29.What happens when a frame with S-VLAN tag 500 and C-VLAN tag 128
is send towards the end user?
2 8 52
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

4 Hands on

4.1 Retrieval exercises [cont.]


30.What happens when a frame with S-VLAN tag 500 and C-VLAN tag 234
is send towards the end user?
31.What happens when a frame with VLAN tag 123 is send towards the
end user?

32.What happens when an untagged frame is send towards the end user?

2 8 53
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

4 Hands on

4.2 CC Vlan set up


1. Go to the port that you configured before and where the modem is
connected. Delete all previous configured VLAN associations from the
different logical ports.

2. Use the AMS to cross-connect PVC 8/37 with VLAN id 20x as default
VLAN. Frames coming from the end user are untagged. BRAS is
available on the other side. Do all what is necessary to be able to
configure this setup.
Verify if you receive an IP address.
Setup

2 8 54
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

4 Hands on

4.2 CC Vlan set up [cont.]


3. Use the CLI to cross-connect PVC 8/36 with VLAN id 15x as default
VLAN 15X to PVC 8/36. Frames coming from the end user are
untagged. DHCP server is available on the other side. Verify if you
receive an IP address.
Setup

2 8 55
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

4 Hands on

4.2 CC Vlan set up [cont.]


4. Delete all previous configured VLAN associations from the different
logical ports.
5. A business user has different sites, connected to different ISAMs.
In there respective LAN, they use VLAN-tags.
We want to connect the different sites with VLAN-id 15x in the EMAN.
How do you proceed? Do all what is necessary to be able to configure
this setup. Proceed with AMS and check your configuration with CLI.
Verify if you have IP connectivity to end user(s) on the other sites
setup

2 8 56
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

4 Hands on

4.2 CC Vlan set up [cont.]


6. Delete all previous configured VLAN associations from the different
logical ports.
7. Multiple end-users are connected towards the IPedge with VLAN 15x.
End-users send their frames untagged. We use a VLAN tag to identify
the end-user within the ISAM.
Associate port 8/36 with the service going towards this IP-edge.
Do all what is necessary to be able to configure this setup. Proceed
with AMS and check your configuration with CLI.
Setup

8. Delete the VLAN association on bridge port linked to ATM termination


8/36. Replace it with an S-VLAN cross-connect with VLAN id 16x.
Check if you get an IP-address from the DHCP server.
2 8 57
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

4 Hands on

4.2 CC Vlan set up [cont.]


9. VLAN translation:
Delete the VLAN association on bridge port linked to ATM PVC 8/37.
Replace it by a similar one (VLAN20x), but with VLAN translation. The
subscriber VLAN id = 10 If the modem doesnt generate tags, youll
have to define PVID = 10 (which is of course not very realistic!
Typically, you would do VLAN translation only if the modem sends
tagged traffic. So this is simply a workaround to be able to set up a
scenario with VLAN translation!)

10.Same question for S-VLAN cross-connect. Remove the S-VLAN crossconnect association on port 8/36 and replace it by a similar one with
VLAN translation.
Subscriber VLAN: S-VID = 20; network S-VLAN = 16x.

11.Create a (dummy because it can be tested!) stacked cross-connect:


subscriber VLAN = 30; network VLAN id = stacked:900:10x.
2 8 58
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

5 Annex A: Basic GPON QoS configs

2 8 59
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

5 Annex A: Basic GPON QoS configs

5.1 Ingress QoS profile


configure qos profiles
ingress-qos all-in-one
dot1-p0-tc 0
dot1-p1-tc 0

dot1-p7-tc 0

all p-bits are mapped to the same TC


hence all traffic enters one single queue

configure vlan id 150 mode residential-bridge


(secure-forwarding)
in-qos-prof-name name: all-in-one
the p-bit mappings are actually/also needed on the ONT
they are downloaded to the ONT when provisioning the bridge port!
2 8 60
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

The ingress qos profile corresponds more or less to the PQ-profile from the 7342!

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

5 Annex A: Basic GPON QoS configs

5.2 Bandwidth profile


configure qos profiles
bandwidth CBR1000
committed-info-rate 1000
assured-info-rate 1000
excessive-info rate 1000
delay-tolerance 80

configure qos interface 1/1/5/1/33/1/1


upstream-queue 0 bandwidth-profile name:CBR1000
by default, one T-CONT will be assigned per queue,
unless bandwidth sharing is enabled!

2 8 61
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

End of module
Cross Connect IACM

2 8 62
NE Operation Cross Connect IACM
7302-7360 ISAM R4.6 High Cap. NT/5520 AMS - L2 & PPPoX forwarding

COPYRIGHT ALCATEL-LUCENT 2013. ALL RIGHTS RESERVED.

Copyright 2013 Alcatel-Lucent. All Rights Reserved.


TAC42050-HO10 Edition I2.0

You might also like