Professional Documents
Culture Documents
com
November 2009
Design and specification are subject to be changed without pre notice.
2010_gatalogue2010.3.1510:31AM페이지 1
www.inter-m.com
Total
C O
P.A Digital Line Up
NTENTS >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
57 / ES-9116, PX-9116
Solution
07
- 6 Input 21 Output Matrix
- Allocate BGM Source to Output Zone
- Clear LED Visual Display Shows Destination Status of Each - Digital Amplifier Block
Area/Zone - 7 x 30W(70V/100V, High Impedance)
- Interface for Remote Zone Controllers L-500(21 Zones) - 1 x Spare Amplifier Channel
- Channel Monitor Output
- Interface for Remote Paging Microphones RM-500(4 No.)
- Signal & Status LED Indicators
- Interface for Video Matrix V-500
- Comprehensive Protection Circuts
- Adoption of RS-422 / RS-232 communication method supporting long
- Adoption of stable SMPS (switching mode power supply)
distance
- Operation of DC 24V battery power during emergency
- Convenient connection with 7CH power AMP with adoption of
- Power Source : 100~120VAC or 220~240VAC ; 50/60Hz, DC 24V
output terminal (supplied AC mains transformer depends on country requirements)
- Power Source : DC 24V - Power Consumption : 70W
- Weight : 4.3kg / 9.5lb - Weight : 8.5kg / 18.7lb(Module)
- Dimensions (W×H×D) : 482×132×380mm / 19×5.2×15in - Dimensions (W×H×D) : 482×310×380mm / 19×12.2×15in
F-500 V-500
08
- DC 24 Volt Power Source - 8 Input 6 BUS 21 Out Channel Video Matrix Switch
- Alarm status Display Function - 6 BUS Video Link Output
- Macro Save Function - 21 Zone Video Output
- DEMO Function - RS-422C port : Select C-500 BUS Output
- Fire Alarm Display - RS-232C port : Select Z-500 Video Output
- Safety Design for Preventing Malfunction - Power Source : DC 24V
- Emergency Contact Terminal for Emergency Link - Weight : 3kg / 6.6lb
- Broadcasting Zone Link Function - Dimensions (W×H×D) : 482×88×380mm / 19×3.5×15in
- Store Information Protective Function
- Power Source : DC 24V
- Weight : 2kg /4.4lb
- Dimensions (W×H×D) : 482×44×380mm / 19×1.73×15in
2010_gatalogue2010.3.1510:31AM페이지 7
09
- Remote Control of Zone Volume and Selection of BGM Source - 19″Enclosure to Accommodate 3 x A-500 Power Amplifier Blocks
- Independent Local MIC and BGM Inputs
- Source Designation
- Convenient Installation without ID Setting(Auto Addressing)
- RS-422 Communication between L-500 and Z-500
- Weight : 1.6kg / 3.5lb
- Dimensions (W×H×D) : 70×114×60mm / 2.8×4.5×2.4in
RM-500
Applications >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
P.A DIGITAL LINE UP
500 Series
10
2010_gatalogue2010.3.1510:31AM페이지 9
11
- 8CH Aux(MIC/Line) Input, Combo Jack
- Interface for 8 x SR-100 Remote MIC Consoles, RJ 45
- USB Port built-in for external memory interface
- 16 x 4 Fire Sensor Contacts
- Audio output matrix function with 16CH volume input
- DIGI-link ports(2ea) and RS-232C(3ea) communication port volumes
for the external source equipment control.
- Power Source : 100~120VAC or 220~240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
- Power Consumption : 68W
- Weight : 11kg / 24.2lb
- Dimensions (W×H×D) : 482×176×380mm / 19×6.9×15in
SM-100 SP-100
12
- 15″LCD Monitor panel and Touch Screen Controller - 6CH 60W Digital Amplifier
- Built-in EM Microphone - Light weight
- Built-in Monitoring speaker - 6 BUS broadcasting function with a UTP (Category 5) cable.
- Programmable UI Graphics - Ch Volume contactrol and 6 Band EQ tuning function
- Power Source : DC 12V, 3.5A - Auto/Manual AMP ID Detection
- Power Consumption : 42W - Self-Broadcasting function using a local input
- Weight : 6.5kg / 14.3lb - Interface function with other equipment using a Control Input/Output
- Dimensions (W×H×D) : 482×310.5×60mm / 19×12.4×2.4in contact
- Power Source : 100~120VAC or 220~240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
- Power Consumption : 95W
- Weight : 13kg / 28.6lb
- Dimensions (W×H×D) : 482×88×380mm / 19×3.5×15in
2010_gatalogue2010.3.1510:31AM페이지 11
Pre Amplifier >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> System Remote MIC Station / 12 Key MIC Station Keypad
13
- 6 CH pre-amplifier - MIC/AUX/Speaker volume adjustable
- 6 BUS broadcasting function with a UTP(Category 5) cable - Simple interface connection by UTP(Category 5)
- Remote control through Ethernet - One-Touch broadcasting function using a [TALK] button
- Self-Broadcasting function using a local input - Speaker volume for monitoring zone broadcasting
- Interface function with other equipment using a Control Input/Output - Broadcasting zone expansion using by SR-100KP
contact - Power Source : DC 12V
- Volume tuning function by channel - Power Consumption : 7W
- Power Source : 100~120VAC or 220~240VAC ; 50/60Hz, 24VDC - Weight : 1.1kg / 2.4lb
(supplied AC mains transformer depends on country requirements) - Dimensions (W×H×D) : 456×200×65mm / 18×7.9×2.6in
- Power Consumption : 15W
- Weight : 6.5kg / 14.33lb
- Dimensions (W×H×D) : 440×88×388mm / 19×3.5×15in
Applications >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
P.A DIGITAL LINE UP
IPC SYSTEM
14
2010_gatalogue2010.3.1510:32AM페이지 13
Ⅲ >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Inter-M PA Convergence SystemⅢ Control Video Server >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
15
- Embedded XP based A/V server system
- 8CH SD video real-time streaming by UDP transmission method
- 6CH audio real-time streaming by UDP transmission method
- Controlled by SA-300 through RS-232 communication
- Built-in 1 Gigabit LAN
- 7″LCD monitor display
- Power Source : 100~120VAC or 220~240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
- Power Consumption : 83W
- Weight : 9.1kg / 20lb
- Dimensions (W×H×D) : 482×177×441mm / 19×7×17.3in
SA-300 SB-300
16
Applications >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
17
PAC-5000
18
Applications >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
19
PSI-5120A/5240A
20
21
- 1U Rack Size
- Multi-channel power amplifier, 300W x 4 CH
- Independent SMPS power supply of each Channel
- Low power consumption, low heat and light weight
- High pass filter switch ( 65Hz / 400Hz )
- Volume or Trim selectable (Internal)
- Indicators : Protection, Clip, -10dB, -30dB
- Protection : thermal, DC, over current, output short
- Power Consumption : 270W(⅛Pmax)
- Power Source : 220~230VAC ; 50/60Hz
- Weight : 9.8kg / 21.2 lb
- Dimensions (W×H×D) : 482×44×420mm / 19×1.7×16.5in
Model DPA-430H
Spec
Rated Power 300W x 4 channel
Input Sensitivity (1kHz) 1V / 10kΩ Balanced
Output Voltage/Load Impedance 70V/16.3Ω , 100V/33.3Ω
T.H.D (AES17 Filter)
Prated (300W, 1kHz) less then < 0.1%
⅓Prated (100W, 1kHz) less then < 0.03%
Signal to Noise Ratio(20kHz LPF, A-WTD) >100dB
High Frequency Response (+1, -3dB) ≥20kHz
Low Frequency Response
High Pass Filter Off (-3dB ±2dB) 65Hz
High Pass Filter On (-3dB ±2dB) 400Hz
Volume Control 0dB ~ minimum (default)
0dB ~ -12dB (with Jumper setting)
Operating Temperature -10°C ~ +40°C
PCT-610/620
SHELF MOUNT PRODUCTS
24
PA-935A PA-1000B/1000BR
25
(supplied AC mains transformer depends on country requirements)
- Power Consumption : 45W
- Weight : PA-1000B : 4.6kg / 10lb, PA-1000BR : 4.8kg / 11.5lb
- Dimensions (W×H×D) : 300×88×260mm / 11.8×3.5×10.2in
▶Optional rack mount adapters are available. ▶Optional rack mount adapters are available.
MA-106 MA-206/212/224
SHELF MOUNT PRODUCTS
- Output Power : 60W(RMS) @<1% THD - Output Power : MA-206 : 60W(RMS) @<1% THD
- High fidelity mic mixing amplifier - Output Power : MA-212 : 120W(RMS) @<1% THD
- 4 ohm direct output - Output Power : MA-224 : 240W(RMS) @<1% THD
- 70V, 100V transformer coupled output - High fidelity mic mixing amplifier
- Tone (treble / bass) - 4-ohm, 70V and 100V transformer coupled output
- Input signal display with LED - 5 Zone output and all zone selectable
- External mute and TEL IN - 5 Band graphic equalizer
- Dedicated microphone INPUT1 (Phone [Front] or XLR connector) - 3 microphone input or line input (XLR connector)
- Phone jack for INPUT2 (MIC/LINE selectable) - 2 microphone input or line input (Phone jack)
- Phone jack and RCA jack for INPUT3 - Switchable phantom power supply (MIC1~3)
26
- Power Source : 100~120VAC or 220~240VAC ; 50/60Hz - RCA jack for line input 6
- Power Consumption : 24W - VCA ( Voltage Controlled Amplifier)
- Weight : 3.0kg / 6.6lb - External mute and TEL IN
- Dimensions (W×H×D) : 300×44×230mm/11.8×1.7×9in - Chime / Siren signal output
- External chime control
- Channel input level display with LED
- Output level display with LED
- Power Source : 100~120VAC or 220~240VAC ; 50/60Hz
- Power Consumption : MA-206 : 38W, MA-212 : 50W, MA-224 : 75W
- Weight : 4.8kg / 10.6lb
- Dimensions (W×H×D) : 420×88×320mm/16.5×3.5×12.6in
328
MA-224
PUBLIC ADDRESS AMPLIFIER SPEAKER SELECTOR
CHIME SIREN SP 1 SP 2 SP 3 SP 4 SP 5 ALL
MA 106
100Hz 330Hz 1kHz 3.3kHz 10kHz
POWER
PROTECTION
MAX
PAM-510/520
Public Address Amplifier >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Tuner Module for PAM-Series Mixer/Amplifiers >>>>>>>>>>>>>>>>>>>
PAM-120A/340A/480A PAM-T
PAM-CDM
- Output Power : PAM-120A : 120W(RMS) @<1% THD
- Output Power : PAM-340A : 340W(RMS) @<1% THD
- Output Power : PAM-480A : 480W(RMS) @<1% THD
- Input Connectors : Option of screw terminals, XLR, 1/4´´, RCA
(supplied connectors depends on country)
- Optional Modular Signal Sources : CD player, cassette, AM/FM tuner
- 3 Band Equalizer on Inputs : 100Hz/1kHz/10kHz ±12dB - PAM series CD-DA/CD-R/CD-RW/MP3/WMA module
- 2 Band Equalizer (Master) : 100Hz/10kHz ±12dB - Functions : Random Play, Music Scan, Time Counter, Repeat,
- Adjustable Priority Muting : Ch1, 2, chime Track Forward, Track Reverse, Music Search
- Remote Control : multi-tone pre-announcement chime
- Wired remote control for external amps and chime CD / USB / DRP Player, Tuner
28
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
RM-05A
A-60/120 PA-2000A/4000A/6000A
29
- Weight : A-60 : 8.9kg / 19.6lb, A-120 : 10.3kg / 22.7lb - 5 individually-selectable speaker zones with All Call
- Dimensions (W×H×D) : 420×88×320mm / 16.5×3.5×12.6in - Single-cycle multi-tone chime
- Power Source : 100~120VAC or 220~240VAC ; 50/60Hz
(supplied AC mains transformer depends on local requirements)
- Power Consumption : PA-2000A : 95W, PA-4000A : 120W, PA-6000A : 240W
- Weight : PA-2000A : 10kg / 22lb, PA-4000A : 12kg / 26.4lb, PA-6000A : 13.5kg / 29.76lb
- Dimensions (W×H×D) : PA-2000A : 420×100×320mm / 16.5×3.9×12.6in
- Dimensions (W×H×D) : PA-4000A/6000A : 420×133×320mm / 16.5×5.2×12.6in
▶Optional rack mount adapters are available. ▶Optional rack mount adapters are available.
SYSTEM-2240M
SHELF MOUNT PRODUCTS
30
EJECT
PAUSE
TRACK DIRECTORY
F1
PA-2200M ACR-120M
31
- Main Output indicator - 2 Speaker zone selector switches
- Priority Muting for Chime and Mic 1 input - Power Source : 100-120VAC or 220-240VAC ; 50Hz/60Hz
- Two-zone speaker selector buttons (supplied AC mains transformer depends on country requirements)
- Power Source : 100-120VAC or 220-240VAC ; 50Hz/60Hz - Power Consumption : 120W
(supplied AC mains transformer depends on country requirements) - Weight : 14.5kg / 32lb
- Power Consumption : 230W - Dimension(W×H×D) : 420×132×320mm / 16.5×5.2×12.6in
- Weight : 18kg / 39.7lb
- Dimension(W×H×D) : 440×177×390mm / 17.3×7×15.4in
EIA 3H
EIA 3H
EIA 2H
33
PA-935A (page 25) BKT-PA935
EIA 2H
EIA 2H
380
2010_gatalogue2010.3.1510:44AM페이지 35
PF-602 PM-608
37
LM-618 PW-642
- In/Out Channels : 8 Inputs, 8 Outputs(Balanced XLR) - In/Out Channels : 5 Inputs, 4 Outputs(Balanced XLR)
- Built-in high-power speaker for convenient monitoring - Timer-controlled switched AC power outlet
- Built-in monitor speaker with volume control - Weekly memory and clear
- Power Source : 24VDC - Built-In 15 melody and voice files from PV-632
- Power Consumption : 350mA - Protect/back-up functions
RACK MOUNT PRODUCTS
- Weight : 4.6kg / 10.1lb - The shape of outlets can be different according to country requirements.
- Dimensions (W×H×D) : 482×88×380mm / 19×3.5×15in - Power Source : 100~120VAC or 220~240VAC; 50/60Hz, 24VDC
(supplied AC mains transformer depends on country requirements)
- Power Consumption : 10W
- Weight : 5.7kg /12.6lb
- Dimensions (W×H×D) : 482×88×380mm / 19×3.5×15in
38
2010_gatalogue2010.3.1510:44AM페이지 37
PV-632(A) EP-616
- 256kbps MP3 recording for CD-type digital sound quality - Integrates with fire alarm system
- 1Gbyte internal memory for up to 7hours playback and recording - Built-in condenser mic for Emergency broadcasting
- USB v1.1 compatible for computer MP3 file transfers - External auto announcement available with voice file
- In/Out Channels : 3 Inputs (CD, MIC, AUX) - Function test switch
2 Outputs (Headphones, Balanced XLR) - Output level control
INPUT / OUTPUT
3
0dB
13
20
25
PE-603 PG-604
SIREN
2010_gatalogue2010.3.1510:44AM페이지 39
PO-606 TB-616
- 1 XLR input, 6 XLR outputs - 16 CH interface unit for rack system components and external lines
- Level control for each input/output - Weight : 4.5kg / 9.9lb
- LED display for each input/output - Dimensions (W×H×D) : 482×88×380mm / 19×3.5×15in
- Power Source : 100~120VAC or 220~240VAC ; 50/60Hz, 24VDC
(supplied AC mains transformer depends on country requirements)
41
ON OFF
8
4dB
8
4dB
8
4dB
8
4dB
8
4dB
8
PP-613 PA-624
- Inputs : 6 Mono, 3 Stereo, Tone control on each channels - SMPS(switch mode power supply)
- Outputs : 2 Sub outputs, Main output, Rec output, and insert 3-Band EQ - Output Power : 240W(RMS) <1% THD
- 2 Priority input - Digital amplifier
- +18V Phantom power (CH 1, 2) - 400Hz high pass filter
- Power Source : 100~120VAC or 220~240VAC ; 50/60Hz, 24VDC - Adjustable input gain from -12dB to 0dB
RACK MOUNT PRODUCTS
PA-636/648 PD-659
- Output Power : PA-636 : 360W(RMS) < 1% THD, - Rack system AC/DC power control unit
PA-648 : 480W(RMS) <5% THD - Sequence power control switch (Grouping on/off)
- Protection : Thermal, PC limiter - Regulated DC output with Over current protection
- Balanced XLR input with XLR parallel link-out connector - AC Outlets : unswitched 1 Group, switched 3 Group
- 400Hz High pass filter - DC Outlets : DC 24V, 5A
43
PD-658 PB-607
BP-610/620 CD-611
45
Remote Amplifier with Zone Selector >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
RM-616
CD-610 CD-660
TU-610 RC-100
47
SC-624 AFD-614
- Check 24 channel speaker line (open, shot and exceed the referenced value) - AUTO/MANUAL CHECK
- LED indicator display a speaker line status - Easy to set-up check time among 5 steps from 0 to 24hr
- Automatical check speaker wires - AMP (NORMAL/FAULT) indication function through the front LED
- RS-232C terminal IN/OUT control - Automatically change to spare AMP when one channel of the AMP turns to
- DC 24V operation 'fault mode'
RACK MOUNT PRODUCTS
49
PT-9107SD PC-9335AD
PP-9214 PP-9213
- Inputs : 8 Mono, 2 stereo - Inputs : 6 Mono, 3 stereo, tone control on each channels
- Outputs : 2 Main, REC - Outputs : 2 Sub outputs, main output, rec output, and insert 4 band EQ
- 3-Band equalizer - 2 Priority input
- Output selector switch on each input channel - +18V Phantom power
- +4, -10, -20dB attenuator on stereo input - Power Source : 100~120VAC or 220~240VAC; 50/60Hz, DC 24V
51
ECS-9216 PE-9103N
- Priority Control : Emergency, Timer, Remote 1, Remote 2, Main - Chime : Up/Down, 2-tone
- Emergency Speaker Selector : All, Channels 1-16 - Siren : Constant or undulating
- Main Speaker Selector(BGM Speaker Selector) : All, Channels 1-16 - Wired remote control available
- 16 CH speaker line switching - Power Source : 24VDC
- Auto fire sensing and announcement at designated zone - Weight : 2.8kg / 6.2lb
RACK MOUNT PRODUCTS
PA-2312 PA-9312/9324/9336
- Output Power : 120W(RMS) x 2CH @<1% THD - Output Power : PA-9312 : 120W(RMS), PA-9324 : 240W(RMS)
- Protection : Thermal, PC limiter PA-9336 : 360W(RMS) <1% THD
- Balanced XLR input with XLR parallel link-out connectors - Protection : Thermal, PC limiter
- 400Hz High pass filter - Balanced XLR input with XLR parallel link-out connector
- Ground Selector Switch : Frame / Float - 400Hz High pass filter
53
PA-9348 PD-9359
- Output Power : 480W(RMS) <5% THD - Rack system AC/DC power control unit
- Protection : Thermal, PC limiter - Regulated DC output with Overcurrent Protection
- Balanced XLR input with XLR parallel link-out connector - Outlets : 2 AC unswitched, 9 AC switched, 9 DC unswitched
- 400Hz High pass filter - Remote on/off
- Ground Selector Switch : Frame/Float - Emergency battery input
RACK MOUNT PRODUCTS
- Adjustable input gain from -12dB to 0dB - Display : AC, DC volt meter
- Fan forced-air cooling system - Power Source : 100~120VAC or 220~240VAC ; 50/60Hz, 24VDC
- Automatic two-speed cooling fan (supplied AC mains transformer depends on country requirements)
- Output level indicator LEDs - Power Consumption : 217VA
- Power Source : 100~120VAC or 220~240VAC ; 50/60Hz, 24VDC - Weight : 11kg / 24.2lb
(supplied AC mains transformer depends on country requirements) - Dimensions (W×H×D) : 482×132×280mm / 19×5.2×11in
- Power Consumption : 600W
- Weight : 22kg / 48.5lb
- Dimensions (W×H×D) : 482×132×280mm / 19×5.2×11in
54
2010_gatalogue2010.3.1510:45AM페이지 53
PB-9207A PF-9302
55
PO-9106 EP-9216
ES-9116 PX-9116
- Speaker Selector : All, Channels 1-16 - Priority Control : Emergency, Timer, Remote 1, Remote 2, Main
- Auto fire sensing and announcement at designated zone - Display : Prior mode LED
- Display : Selector switch on/off - Two and three wire system
- Expansion capability with additional switchers - Expansion capability with additional matrix devices
- Power Source : 24VDC - Power Source : 24VDC
57
PS-9116I PS-9116
- 16 Zone Speaker Selector Switches : All, Group 1, Group 2, channels 1-16 - 16 Zone Speaker Selector Switches : All, Group 1, Group 2, channels 1-16
- Operating mode indicator for each switch - Operating mode indicator for each switch
- Remote Control Terminals : All, Group 1/2 - Remote Control Terminals : All, Group 1/2
- 2 Input channels - 2 Input channels
- Power Source : 24VDC - Power Source : 24VDC
RACK MOUNT PRODUCTS
RG-9116 LM-9228
59
PG-9104 TB-9116
- 4 Line Inputs - 16 CH interface unit for rack system components and external lines
- 4 Line Outputs - Weight : 3kg / 6.6lb
- Emergency Interface : Input, Timer input, Remote input 1, 2 - Dimensions (W×H×D) : 482×44×280mm / 19×1.75×11in
- Indicators : Emergency, Timer, Remote 1, Remote 2, Line
- Power Source : 24VDC
RACK MOUNT PRODUCTS
BP-9100/9200/9300
61
- Provides DC power sequencing to 8 rear outlets (Total 24V 10A) - RS-422 communication
- 1.5 Second interval for Power-up and 1 second interval for Power-down - Can operate all function of the SPAC-660
- EM DC Power supply (DC 24V 1.5A) - 2 Color LED to indicate a channel status (selected CH or output CH)
- Battery charger (27.3V 3A) - Power source : DC-24V (supplied by SPAC-660)
- 2 Color LED to indicate a channel status (selected CH or output CH) - Weight : 236g / 0.5lb
- Battery level indicator - Dimensions (WxHxD) :144x28x87mm / 5.6x1.1x3.4in
- Circuit protection devices are used to protect devices from battery
63
PX-8000 RM-8000
- New concept of audio matrix system for public addressing and - Connvenient installation with AUTO ID function
emergency broadcasting - Selection of various chime broadcasting for MIC (PRE/POST)
- Expansion of output zones using additional main units. - Priority broadcasting options (RM1>RM2>RM3>RM4)
(8X8^N matrix, N is # of PX-8000) - Output audio level meter
- Convenient priority broadcasting - Internal monitor speaker
RACK MOUNT PRODUCTS
LM-8000
64
IM-300 IMS-300
- Dot MATRIX designed VFD Display - High fidelity 60W mono channel amplifier for extension
- USB Recording (Using USB Memory stick, MP3 file) - Connecting : 30 MIC unit
- High fidelity 60W mono channel amplifier - Extension by D-Sub terminal
- Built-in monitor speaker with control volume - Power Source : 100~120VAC or 220~240VAC ; 50/60Hz
- Tone Control (Bass/ Mid/ Treble) (supplied AC mains transformer depends on country requirements)
65
IMC-300
IMD-300
Note >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
IMX-416/424/432
IMX-432 (32CH)
- IMX-400 series has a facility of fader position and mute-group High Mid : 500Hz~10kHz sweepable ±15dB Peak Q=1.4
memory by internal CPU chips. The recalled fader position is Low Mid : 100Hz~2kHz sweepable ±15dB Peak Q=1.4
indicated by 7-segment display. Low : 80Hz +/-15dB Shelf
- IMX-400 series contains 100V to 240V free-voltage Power-supply in the - Channel Equalizer (Stereo) : High : 12kHz +/-15dB Shelf
frame. High Mid : 3.15kHz +/-15dB Peak Q=1.4
- 4 sub-Groups, 1 stereo MIX and alternative Mono/Sub Low Mid : 315Hz +/-15dB Peak Q=1.4
- 6 AUX sends, 2 Stereo returns Low : 80Hz +/-15dB Shelf
- Fader position and Mute Group memory system
- Input Gain : MIC : +16dB to +60dB continuously valuable, Return : - GENERAL
Power Source : 100~240VAC ; 50/60Hz(supplied AC mains transformer depends on country
0dB requirements)
- Input Gain : MIC with PAD : -10dB to +34dB continuously valuable Power Consumption : 95W
- Input Gain : Stereo Line : -10dB to +20dB continuously valuable Weight : IMX-416: 15kg/33.06lb, IMX-424 : 21kg/46.29lb, :IMX-432 : 27kg/59.52lb
- Maximum System Gain : 90dB(MIC input to MIX output via a GROUP) Shipping Weight : IMX-416: 22kg/48.50lb, IMX-424 : 29kg/63.93lb, :IMX-432 :
37kg/81.57lb
- MIC CMRR : > 80dB(@1kHz +40dB input gain), > 60dB(@20kHz Dimensions (W×H×D) : Set : IMX-416 : 504×192×572mm / 19.8×7.5×22.5in
+40dB input gain) IMX-424 : 720×192×572mm / 28.3×7.5×22.5in
- Frequency Responses : +0, -1dB(20Hz to 20kHz, MIC to Mix O/P IMX-432 : 936×192×572mm / 36.8×7.5×22.5in
+60dB input gain) Dimensions (W×H×D) : Box : IMX-416 : 610×270×690mm / 24.0×10.6×
27.1in
- MIC EIN (22Hz to 22kHz) : <-125dBu(MIC to Mix +60dB input gain with 150 IMX-424 : 825×270×690mm /32.4×10.6×27.1in
ohms termination) IMX-432 : 1040×270×690mm /40.9×10.6×27.1in
- Residual Noise : <-90dB(Mix O/P with no signal assignment, 20Hz to
Professional & Commercial Audio Products
IMX-432 (TABLE TYPE) IMX-424 (TABLE TYPE)
88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88
88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88
72
572
572
72
88 88
88 88
3
3
1 2
1 2
49
PUSH
PUSH
3
3
1 2
1 2
PUSH
PUSH
192 32 872 32 32 656 32
46
46
71
116
PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH
PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH 2 1 2 1 2 1 2 1 PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH 2 1 2 1 2 1 2 1
3 3 3 3
3 3 3 3
2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1
2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH
PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH
2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1
2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
732 532
IMX-416 (TABLE TYPE) IMX-416 (RACK TYPE)
88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88
88 88 88 88 88 88 88 88 88 88 88 88
88 88 88 88 88 88 88 88 88 88 88 88
MIXING CONSOLES
88 88
88
88
3
3 1 2
3
1 2
3 1 2
1 2
PUSH
PUSH
PUSH
PUSH
PUSH PUSH PUSH PUSH
PUSH PUSH PUSH PUSH
2 1 2 1 2 1 2 1
3 3 3 3
2 1 2 1 2 1 2 1
3 3 3 3
PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH
PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH
2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1
3 3 3 3 3 3 3 3 3 3 3 3
2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1
3 3 3 3 3 3 3 3 3 3 3 3
3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2
PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH PUSH
2010_gatalogue2010.3.1510:46AM페이지 69
2010_gatalogue2010.3.1510:46AM페이지 70
IMX-824/832/840
IMX-824 (24CH)
MIXING CONSOLES
IMX-832 (32CH)
72
IMX-840 (40CH)
2010_gatalogue2010.3.1510:46AM페이지 71
(IMX-840)
(IMX-832)
(IMX-824)
MIXING CONSOLES
73
RS-3800
- The RS-3800 is a linear power supply, with the capability of linking two units
together for redundancy.
- A quiet cooling fan helps ensure that internal parts do not overheat.
- Power Source : 100~120VAC or 220~240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
- Weight : 11.5kg/25.35lb
- Dimension (W×H×D) : 482×88×280mm / 19×3.5×11in
- DC Power Cable : 4000mm / 157.5in
Professional & Commercial Audio Products
2010_gatalogue2010.3.1510:46AM페이지 72
MX-1646 CLN-200
- High quality audio performance for studio and live sound applications
- Hard and Soft Knee dynamic curves
- Threshold, Ratio, Level, Attack, Release controls
- Stereo link switch
- 12 Dot gain Reduction LED meter
- 8 Dot Output LED meter
- Dual noise gate
- Bypass Switch
- Input Section: 8 Mono mic/line input, +48V phantom power - Power source : AC adapter (Input : 100~120V AC or 220~240V
4 stereo line inputs, 2 Returns Output : AC 17.5V x 2, 500mA)
Channel equalizer (Mono-3band, Stereo-2band) - Power consumption : 14W
Pan/Bal, Solo, Bus assignment switches - Weight : 2.57Kg /5.6 lb
- Output Section: MIX XLR L/R output - Dimensions (WxHxD) : 482x44x234mm / 19x1.75x9.2in
4 GROUP outputs, 4 AUX outputs
8-Segment GROUP/MIX/SOLO LED level meters
Headphone and Monitor output
- Power Source : 100~120VAC or 220~240VAC ; 50/60Hz
- Power Consumption : 25W
- Weight : 5.78kg / 12.74lb
- Dimensions (WxHxD) : 482x105x310mm / 19x4.1x12.2in
MIXING CONSOLES
2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1
3 3 3 3 3 3 3 3
2 1 2 1
3 3
74
482
105
465
310
235
(7U)
66.5
2010_gatalogue2010.3.1510:46AM페이지 73
Dual-Channel Compressor/ Limiter with Gate >>>>>>>>>>>>>>>>>>>>>> 5 Band Parametric Equalizer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CN-9102 PEQ-105
MIXING CONSOLES
75
ON
-
PEQ 105
5 BAND PARAMETRIC
EQUALIZER
31 Band Graphic Equalizer >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Dual 15 Band, Mono/Dual 31-Band Graphic Equalizer >>>>>>>>
GEQ-131/231 EQ-2215/2131/2231
440
234
2010_gatalogue2010.3.1510:46AM페이지 75
DIB-100
MIXING CONSOLES
77
V2 SERIES -1000/2000/3000/4000
Model
Spec V2-1000 V2-2000 V2-3000 V2-4000
Rated Power 120VAC 230VAC 120VAC 230VAC 120VAC 230VAC 120VAC 230VAC
RL=8Ω @ 0.1% THD (Stereo) 190W 170W 320W 280W 550W 500W 750W 700W
RL=4Ω @ 0.1% THD (Stereo) 340W 300W 550W 500W 1000W 900W 1300W 1200W
RL=2Ω @ 0.5% THD (Stereo) 580W 550W 900W 850W 1600W 1500W 2000W 1900W
RL=8Ω 1kHz @ 0.1% THD (Bridged) 720W 650W 1150W 1000W 2000W 1800W 2600W 2400W
RL=4Ω 1kHz @ 0.5% THD (Bridged) 1200W 1100W 1900W 1700W 3200W 3000W 4000W 3800W
78
V-1000/2000
POWER AMPLIFIERS
Model
Spec V-1000 V-2000
Rated Power 120VAC 230VAC 120VAC 230VAC
RL=8Ω @ 0.1% THD (Stereo) 190W 180W 320W 300W
RL=4Ω @ 0.1% THD (Stereo) 340W 320W 550W 530W
RL=2Ω @ 0.5% THD (Stereo) 580W 580W 900W 900W
RL=8Ω 1kHz @ 0.1% THD (Bridged) 720W 700W 1150W 1100W
79
V-3000/4000
Model
Spec V-3000 V-4000
Rated Power 120VAC 230VAC 120VAC 230VAC
RL=8Ω @ 0.1% THD (Stereo) 550W 550W 750W 750W
RL=4Ω @ 0.1% THD (Stereo) 1000W 1000W 1300W 1300W
RL=2Ω @ 0.5% THD (Stereo) 1600W 1650W 2000W 2100W
RL=8Ω 1kHz @ 0.1% THD (Bridged) 2000W 2000W 2600W 2600W
80
R150PLUS/300PLUS/500PLUS
POWER AMPLIFIERS
L1400/1800/2400/3000
- Controls :
Front : Power on/off switch, attenuator, LED indicators
Rear : Mode selector switch : Stereo/Bridged Mono/Parallel
HPF 50Hz/30Hz/off switch, limiter on/off switch
- Connectors : Input : Combination jack and XLR jack (link)
- Connectors : Output : One 5-Way binding post and one SpeakonTM
- Connectors : Output : per channel
- Indicators : Power : Blue ; Protection : Red ; Clip/Limiter :
- Indicators : Red ; Signal : Green ;
- Indicators : Mode Selector : Yellow
- Filters : 30Hz HPF, 50Hz HPF
- Protection : Turn-on delay, thermal, DC fault, PC limiter, RF,
Clip-limiter, short circuit, open circuit
- Cooling : Continuously variable speed fan, front to rear air flow
- Power Source : 100~120VAC or 220~240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
- Power Consumption(1/8 power, RL=4Ω)
: 120VAC : L1400(7A), L1800(8A), L2400(9A), L3000(11A)
: 230VAC : L1400(3.5A), L1800(4A), L2400(4.5A), L3000(5A)
- Weight : L1400 : 14.4kg / 31.7lb, L1800 : 15kg / 33lb
- Weight : L2400 : 15.6kg / 34.3lb, L3000 : 19.5kg / 39.5lb
- Dimension (WxHxD) : 482x88x369mm / 19x3.5x14.5in
POWER AMPLIFIERS
Model L1800
Spec L1400 L2400 L3000
Rated Power
RL=8Ω @ 0.1% THD (Stereo) 280W 360W 500W 650W
RL=4Ω @ 0.1% THD (Stereo) 450W 600W 750W 1000W
RL=2Ω @ 0.5% THD (Stereo) 700W 900W 1200W 1500W
RL=8Ω 1kHz @ 0.1% THD (Bridged) 900W 1200W 1500W 2000W
RL=4Ω 1kHz @ 0.5% THD (Bridged) 1400W 1800W 2400W 3000W
Input Sensitivity (4Ω, 1kHz) 2.7dBu 3.5dBu 3.5dBu 3.5dBu
82
Q-3300/4300
- Controls
Front : Power on/off switch, Attenuator, LED indicators
Rear : Mode selector switch (Stereo/Bridged mono/Parallel), Gain
selector switch, HPF off/30Hz/50Hz switch, Clip Limiter on/off
switch
- Connectors
Input : Combination Jack (XLR Male or 1/4´´ TRS)
Link : XLR Male
Output : 5-Way binding post and SpeakonTM per channel
- Indicators : Active(Green), -30dB(Green), -10dB(Green), Clip/Port(Red)
- Protection Circuitry
Full Short Circuit, Thermal Protection, Power ON/OFF Muting, DC
Output Protection
- Cooling : 2 variable speed fans, front to rear air flow
- Power Source : 120VAC, 220VAC, 230VAC ; 50/60Hz
(supplied AC mains depends on country requirements)
- Power Consumption(1/8 power, RL=4Ω)
Q-3300 : 120VAC(12A), 220VAC/230VAC(6A)
Q-4300 : 120VAC(14A), 220VAC/230VAC(7A)
- Weight : 11.7kg / 25.8lb
- Dimension(W×H×D) : 482×88×407mm / 19×3.5×16in
POWER AMPLIFIERS
Model
Spec Q-3300 Q-4300
Rated Power 120VAC 230VAC 120VAC 230VAC
RL=8Ω @ 0.1% THD (Stereo) 550W 550W 750W 750W
RL=4Ω @ 0.1% THD (Stereo) 1000W 1000W 1300W 1300W
RL=2Ω @ 0.5% THD (Stereo) 1600W 1650W 2000W 2100W
RL=8Ω 1kHz @ 0.1% THD (Bridged) 2000W 2000W 2600W 2600W
RL=4Ω 1kHz @ 0.5% THD (Bridged) 3200W 3300W 4000W 4200W
0.94V 0.94V 1.04V 1.04V
83
EMI-300
- Amp Section
Rated Power : 2 x 150W @ 4Ω @ < 0.5% THD
1 x 300W @ 8Ω (bridged mono) @ < 0.5% THD
Limiter to eliminate overload distortion
- Preamp Section
Input : 5 x Line input
Input : 2 x Mic input
Input : 2 Insert
Output : REC out L/R
Output : Master 2 out L/R
Output : Master 1 mono sub out (low pass 100Hz/12dB)
Output : 2 band equalizer (6dB Bass and Treble)
Display : 2 x 5-Segment LED level meters for amp 1 and amp 2
2 x 1 LED for limit
- Power Source : 100~120VAC or 220~240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
- Power Consumption : 261W
- Weight : 13kg / 28.6lb
- Dimensions (W×H×D) : 483×88×382mm / 19×3.5×15in
POWER AMPLIFIERS
84
2010_gatalogue2010.3.1510:47AM페이지 83
QD4240/4480/4960
POWER AMPLIFIERS
OT-4240/4480/4960
Note >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
POWER AMPLIFIERS
87
SE-8/10/12/15
SE-8 SE-10
SE-12 SE-15
SE SERIES
- HF driver protection circuit
- 1 inch exit high power compression driver
- Mounting pole socket and Flying point(M8)
Model
Spec SE-8 SE-10 SE-12 SE-15
Type Ultra-compact, two-way passive Compact,two-way passive Compact,two-way passive Compact,two-way passive
Frequency Response 65Hz~18kHz 55Hz~18kHz 40Hz~18kHz 38Hz~18kHz
8″LF driver 10″LF driver 12″LF driver 15″LF driver
Drivers 1″exit HF compression driver 1″exit HF compression driver 1″exit HF compression driver 1″exit HF compression driver
SPEAKERS
Rated Power 100W AES,400W peak 150W AES,600W peak 250W AES,1000W peak 300W AES,1200W peak
Sensitivity 93dB(1w/1m) 94dB(1w/1m) 96dB(1w/1m) 97dB(1w/1m)
Maximum SPL 112dB(1m) 114dB(1m) 117dB(1m) 119dB(1m)
Nominal Impedance 8Ω 8Ω 8Ω 8Ω
Crossover Frequency 2500Hz 2300Hz 2150Hz 2000Hz
Dispersion(-6dB) 75°horizontal, 60°vertical 75°horizontal, 60°vertical 75°horizontal, 60°vertical 75°horizontal, 60°vertical
Connectors 2 X NL4 2 X NL4 2 X NL4 2 X NL4
Fittings 3 x M8 / 1x mounting pole socket 6 x M8 / 1x mounting pole socket 6 x M8 / 1x mounting pole socket 6 x M8 / 1x mounting pole socket
Weight 13kg/28.6lb 17.4kg/38.3lb 22.8kg/50.3lb 32kg/70.5lb
Dimensions mm 296x460x290 362x545x355 422x665x415 480x736x470
(W×H×D) in 11.7x18x11.4 14.3x21.5x14 17.4x26.2x16 19x29x18.5
90
2010_gatalogue2010.3.1510:48AM페이지 89
SQ-8/10/12/15, SB-15A/18A
SB-15A SB-18A
SQ SERIES SB SERIES
- HF driver protection circuit - Compact Sub Base System
- 1 inch exit high power compression driver - Aluminum die-cast frame high power woofer
- Mounting pole socket and Flying point(M8) - Solid Plywood Enclosure
- Multi-angled enclosure design - Mounting pole socket
- Symmetrical Setting Angle(SSA) and Multi Angle
Adjuster (MAA) for floor monitor
Model
Spec SQ-8 SQ-10 SQ-12 SQ-15 SB-15A SB-18A
Type Ultra-compact, Compact, Compact, Compact, Compact, Compact,
two-way passive two-way passive two-way passive two-way passive sub-bass system sub-bass system
Frequency Response 65Hz~18kHz 65Hz~18kHz 55Hz~18kHz 45Hz~18kHz 40Hz~300kHz 35Hz~300kHz
8″LF driver 10″LF driver 12″LF driver 15″LF driver
Drivers 15″bass driver 18″bass driver
1″exit HF 1″exit HF 1″exit HF 1″exit HF
compression driver compression driver compression driver compression driver
Rated Power 150W AES,600W peak 250W AES,1000W peak 350W AES,1400W peak 450W AES,1800W peak 450WAES,1800Wpeak 600W AES,2400W peak
SPEAKERS
SC-28/212/212M/215/315/2152
- MDF construction increases the strength of the cabinet and improves sound quality
- High power low frequency drivers in premium pressed-steel baskets for low-frequency extension to 40~55Hz
- Ti35/Ti44 titanium HF drivers provide clear high frequency projection
- These loudspeaker systems are suitable for disco clubs, concert halls and fitness centers.
Model
Spec
Unit SC-28 SC-212 SC-212M SC-215 SC-315 SC-2152
Impedance Ω 8 8 8 8 8 4
Components Way 2 Way 2 Way 2 Way 2 Way 3 Way 2 Way
SPEAKERS
inches 1 x 8″ + Ti35 1 x 12″ + Ti35 1 x 12″ + Ti35 1 x 15″ + Ti35 1 x 15″ +8″ +Ti35 2 x 15″+ Ti44
Rated Power RMS W 100 200 200 300 300 600
Max. W 200 400 400 600 600 1200
Frequency Response Hz 55–20k 45–20k 50–20k 45Hz–20kHz 40–20k 50–20k
SPL (1W/m) dB 92dB 98dB 98 99 100 102
Weight kg 12 19 18 24 35 50
lb 26.4 41.8 39.6 53 77.1 110
Dimensions mm (312+185)x463x250 (403+232)x596x341 (403+232)x596x341 (476+284)x696x390 (507+300)x916x422 (555+319)x1196x481
(W×H×D) inches (12.2+7.3)x18.2x9.8 (15.9+9.1)x23.4x13.4 (15.9+9.1)x23.4x13.4 (18.7+11.1)x27.4x15.4 (20+11.8)x36x16.6 (21.9+12.6)x47x18.9
92
2010_gatalogue2010.3.1510:48AM페이지 91
CS-710/720/730/740
INDOOR
Model
Spec Unit CS-710 CS-720 CS-730 CS-740
Rated Power W 10 20 30 40
Impedance Ω 1k/2k 500/1k 330/660 250/500
Frequency Response Hz 200~14k 200~14k 200~14k 200~14k
SPL (1W/m) dB 88 90 91 93
Enclosure Material Aluminum
Weight kg 1.6 2.9 3.8 4.6
lb 3.52 6.38 8.36 10.12
Dimensions mm 138x253x105 138x326x105 138x453x105 138x580x105
(W×H×D) inches 5.4x10x4 5.4x12.8x4 5.4x17.8x4 5.4x22.8x4
CS-810/820/830/840
OUTDOOR
Model
Spec Unit CS-810 CS-820 CS-830 CS-840
Rated Power W 10 20 30 40
Impedance Ω 1k/2k 500/1k 330/660 250/500
Frequency Response Hz 200~22k 200~22k 200~22k 200~22k
SPL (1W/m) dB 92 95 96 99
Enclosure Material Aluminum
Weight kg 2.9 3.6 4.7 5.4
CS-810 CS-820 CS-830 CS-840 lb 6.4 7.9 10.4 12
(10W) (20W) (30W) (40W)
Dimensions mm 149x310x124 149x420x124 149x530x124 149x640x124
(W×H×D) inches 6x12.2x5 6x16.5x5 6x21x5 6x25x5
CS-910/920/930/940
INDOOR Bracket B
Wall
Bolt
Bracket A
SPEAKER
Nut
HILTI Nail
Screw
SPEAKERS
Model
Spec Unit CS-910 CS-920 CS-930 CS-940
Rated Power W 10 20 30 40
Impedance Ω 1k/2k 500/1k 330/660 250/500
Frequency Response Hz 250~14k 250~14k 250~14k 250~14k
SPL (1W/m) dB 88 90 91 93
Enclosure Material Aluminum
Weight kg 1.4 2.5 3.6 4.7
lb 3.08 5.5 7.92 10.34
Dimensions mm 104x300x86 104x478x86 104x656x86 104x834x86
CS-910 CS-920 CS-930 CS-940 (W×H×D) inches 4x12x3.4 4x19x3.4 4x21x3.4 4x33x3.4
93
CU-910(V)/920(V)/930(V)/940(V)
INDOOR
- Color : Light Grey
- Horn Unit(CU-910V/920V/930V/940V), Tweeter Unit (CU-910/920/930/940)
2Way - Simple and clear design with their tweeter unit corners and edges
- Top quality durable units are applied for high sound pressure level and
excellent sound reproduction performance
- Strong aluminum frame which guarantees the strength of the cabinet
2Way - The highest grade of twitter speakers are used to achieve the best of the
sound
- User based design for fast installation
2Way - Speaker Terminal added for easy installing and convenience
2Way Model
Spec Unit CU-910(V) CU-920(V) CU-930(V) CU-940(V)
Rated Power W 10 20 30 40
Impedance Ω 1k/2k 500/1k 330/660 250/500
Frequency Response Hz 220~15k 220~15k 220~15k 220~15k
SPL (1W/m) dB 87 90 91 93
Enclosure Material Aluminum
Weight kg 1.45 2.35 2.85 3.35
lb 3.2 5.2 6.3 7.4
Dimensions(W×H×D) mm 104x290x86 104x400x86 104x490x86 104x580x86
inches 4x11.4x3.4 4x15.7x3.4 4x19.3x3.4 4x22.8x3.4
CU-910(V) CU-920(V) CU-930(V) CU-940(V)
(10W) (20W) (30W) (40W)
CU-920H(V)/940H(V)
OUTDOOR
- Color : Light Grey
- Horn Unit(CU-920HV/940HV)
- Simple and clear design with their rounded corners and edges
2Way - Top quality durable units are applied for high sound pressure level and
excellent sound reproduction performance
- Strong aluminum frame which guarantees the strength of the cabinet
- The highest grade of twitter speakers are used to achieve the best of the sound
- User based design for fast installation
- Waterproof, dampproof materials ensure this speaker suitable for
2Way working in the harsh outdoor environments
- Speaker Terminal added for easy installing and convenience
Model
Spec Unit CU-920H(V) CU-940H(V)
Rated Power W 20 40
SPEAKERS
GS-50BT/50WT
- Rated Output : 20W
- 4ohms or 500ohms Impedance
- Two-Way Speaker : 2 1/4´´Cone Type Tweeter and 5´´Free-edge Woofer
- Frequency Response : 90Hz-18kHz
- Color Coded Push-Type Connection Terminals
- Compatible with Optional FSB-1 Bracket
GS-50BT GS-50WT
*BRACKET(FSB-1)
: Wall mount bracket
Model
Spec Unit GS-50BT GS-50WT : for GS-50BT/WT speaker
FS-30/60/100/52
- A switch (FS-30/60/100) permits use with either low impedance (8ohm)
or high- impedance (70/100V line) amplifiers
- Full range 5 1/4´´x 2(FS-30/60/100)
- 2Way 1´´+ 5 1/4´´(FS-52)
- FS-52 available only in 8ohm version
- Color coded connection terminals : Red=positive (+) and black=negative (-)
- Connection terminals are push-type to permit easy cable connections
FS-30/60/100 FS-52
- 30W/60W/100W - 50W
- 5´´ Full Range x 2 - 1´´ Dome Tweeter
- 5 1/4´´ Cone Woofer *BRACKET(FSB-2)
- 3.74´´x 3.74´´ Horn
SPEAKERS
Model
Spec Unit FS-30 FS-60 FS-100 FS-52
Rated Power W 30 60 100 50
Impedance Ω 8/333 8/167 8/100 8
Frequency Response Hz 180 ~ 13k
Weight kg 3.5 3.6 3.8 4
lb 7.7 8 8.4 8.8
Dimensions mm 175x300x158.5
(W×H×D) inches 6.9x11.8x6.24
Bracket (Option) FSB-2
95
CS-03A/05/03/10 - Versatile
- Easy installation
- Excellent for public address applications
Model
Spec Unit CS-03A CS-05W/05G
Rated Power W 3 5
Impedance Ω COM, 3.3k, 5, 10k COM, 2k, 4k, 8k
Frequency Response Hz 150 ~ 15k 150 ~ 14k
SPL (1W/m) dB 90 92
Weight g 725 945
Model
Spec Unit CS-03 CS-10
Rated Power W 3 10
Impedance Ω COM, 3.3k, 5k, 10k COM, 1k, 2k
Frequency Response Hz 180 ~ 10k 120 ~ 10k
SPL (1W/m) dB 90 92
Enclosure Material Aluminum ABS resin
Weight kg 0.65 1
CS-03 CS-10
lb 1.4 2.2
(3W) (10W) mm
Dimensions 228(Ø)x96 303x303x95
(W×H×D) inches 9(Ø)x3.8 12x12x3.75
CS-3/6/12 - Versatile
- Easy installation
- Excellent for public address applications
Model
Spec Unit CS-3 CS-6 CS-12
Rated Power W 3 6 12
Impedance Ω COM,3.3k,5k,10k COM,1.7k,4k,8k COM,800Ω,1k,2k
Frequency Response Hz 150 ~ 15k 150 ~ 15k 150 ~ 15k
SPL (1W/m) dB 91 92 93
Weight g 700 710 740
CS-20/30/80 - Versatile
- Easy installation
- Excellent for public address applications
SPEAKERS
Model
Spec Unit CS-20 CS-30 CS-80
Rated Power W 20 30 80
Impedance Ω COM,500Ω,1k,2k COM,330Ω,500Ω,1k COM,125Ω,250Ω,500Ω
Frequency Response Hz 150 ~ 20k 150 ~ 20k 150 ~ 20k
SPL (1W/m) dB 92 93 93
Weight kg 2 2.7 3.7
APT-01A/03A
Model
Spec Unit APT-01A APT-03A
Rated Power W 1 3
Impedance Ω 10k 3.3k
Frequency Response Hz 320 ~ 20k 250 ~ 20k
SPL (1W/m) dB 83 85
Enclosure Material ABS ABS
Weight kg 0.224 0.23
APT-01A/03A lb 0.5 0.51
Dimensions mm 120x120x55
(1W/3W)
(W×H×D) inches 4.7x4.7x2.2
APT-01R
Model
Spec Unit APT-01R
Rated Power W 1
Impedance Ω 10k
Frequency Response Hz 260 ~ 10k
SPL (1W/m) dB 84
Enclosure Material ABS
Weight kg 0.22
APT-01R lb 0.5
Dimensions mm 152(Ø)x55
(W×H×D) inches 6(Ø)x2.2
SPEAKERS
97
CF-60/120(B/W)
Model
Spec
Unit CF-60B/60W CF-120B/120W
Constant W 60 120
Rated Power
Peak W 100 150
Frequency Response Hz 150~18k 150~18k
CF-60B/120B CF-60W/120W Impedance Ω 8, 166, 333, 666 8, 83, 166, 333
SPL (1W/m) dB 90 90
WALL HF Drive Inch 1″ 1´´
CORNER LF Drive Inch 5 1/4″ 5 1/4´´
Cross-Over Frequency Hz 2.5k 2.5k
BRACKET
SPEAKERS Dispersion Angle 120°(H) 90°(V)
BRACKET
Weight kg/lb 2.7/6 3.2/7
SPEAKER
Dimensions mm 226x327x163
(W×H×D) inches 8.9x12.9x6.4
CH-510/522/530/532
CH-530(30W)
SPEAKERS
CH-532(30W) Frequency Response Hz 110 ~ 20k 100 ~ 20k 150 ~ 18k 100 ~ 20k
SPL (1W/m) dB 95 95 95 95
4� Coaxial Cone
Weight kg/lb 3.5/7.7 3.3/7.3 3.5/7.7
Dimensions mm 294x209x326
(W×H×D) inches 11.6x8.2x12.8
98
2010_gatalogue2010.3.1510:48AM페이지 97
H-20, HS-S20/20/30/50/30RT/40RT
IWS-10/10A
- Stylish design.
- Adapting high performance unit for sophisticated and rich sound.
- Realizing the design with pursuing the modern sense.
- Sound volume adjustable with attenuator(IWS-10A).
IWS-10(W/B) IWS-10A(W/B)
SPEAKERS
Model
Spec Unit IWS-10 IWS-10A
Rated Power W 10 10
Frequency Response Hz 220 ~ 12k 220 ~ 12k
COM, 1K, 3.3K
Impedance Ω COM, 1K, 3.3K
(sw off,-12dB,-6dB,0dB)
SPL (1W/m) dB 90 90
Weight kg 1.1 1.3
lb 2.4 2.8
Dimensions mm 179x312x109 179x312x109
(W×H×D) inches 7x12.3x4.3 7x12.3x4.3
99
SWS-10(A)/03(A)
SWS-10(A)/03(A)
Model
Spec Unit SWS-10(A) SWS-03(A)
182 120
Rated Power W 10 / 5 / 3 100V 3 / 2 / 1 100V
Frequency Response Hz 150 ~ 12k 150 ~ 12k
Impedance Ω 8,83,166,333 8,166,333,666
SPL (1W/m) dB 90 89
Color Ivory or Brown Ivory or Brown
274
Material Injection Moulded Injection Moulded
Weight kg 1.34 1.1
lb 3 2.4
Dimensions mm 182x274x120 182x274x120
(W×H×D) inches 7.2x10.78x4.7 7.2x10.78x4.7
Attenuator >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
ATT-03/30/BOX
- Four-step level control
- Switch-plate-mounted attenuator unit
- Attractive, modern design
- Simple installation
- Screwless terminal block for easy installing
- Steel box for ATT-03/30(Attenuator Box)
dBV/Pa mV/Pa
DAAS
Correction factor : -10 dB and -50 , -88.4 dB (Diff : -15.5)
-60 1.000
-70 0.316
-80 0.1000
-90 0.0316
-100 0.0100
-110 0.0032
dBV/Pa mV/Pa
DAAS
Correction factor : -10 dB and -50 , -88.4 dB (Diff : -15.5)
-60 1.000
-70 0.316
-80 0.1000
-90 0.0316
-100 0.0100
-110 0.0032
dBV/Pa mV/Pa
DAAS
Correction factor : -10 dB and -50 , -75.0 dB (Diff : 12.3)
-60 1.000
-70 0.316
-80 0.1000
-90 0.0316
-100 0.0100
-110 0.0032
dBV/Pa mV/Pa
DAAS
-60 1.000
-70 0.316
-80 0.1000
-90 0.0316
-100 0.0100
NMD-810V
-110 0.0032
-120 0.0010
dBV/Pa mV/Pa
DAAS
-60 1.000
-70 0.316
-80 0.1000
-90 0.0316
-100 0.0100
SCM-6000V -110
-120
0.0032
0.0010
Model
Spec
Unit MD-110V MD-510V MD-710V NMD-810V SCM-6000V
Type Dynamic Microphone
Frequency Hz 55Hz~16kHz 55Hz~16kHz 55Hz~16kHz 50Hz~17kHz 50Hz~17kHz
Response dB -75dB ±3dB -75dB±3dB -75dB±3dB -75dB±3dB -73dB±3dB
Sensitivity Ω 600Ω±30% 600Ω±30% 600Ω±30% 600Ω±30% 350Ω±30%
Impedance g 250±10(without cable) 250±10(without cable) 250±10(without cable) 250±10(without cable) 250±10(without cable)
Weight lb 0.55±0.02 0.55±0.02 0.55±0.02 0.55±0.02 0.55±0.02
Dimensions mm ø51x174 ø51x174 ø51x172 ø51x174 ø51x180
(W×H×D) inches ø2x6.9 ø2x6.9 ø2x6.8 ø2x6.9 ø2x7.1
101
RM-01
10
-10
-20
-30
-40
B 10 20 50 100 200 500 1000 2000 5000 10000 20000 40000
FREQUENCY Hz
Model
Spec Unit RM-01
Weight kg 1.4
lb 3
Dimensions mm 90x45x133
(W×H×D) inches 3.5x1.8x5.2
RM-01
RM-916
+20
dB
+10
-10
0º
-20 180º
-30
50 100 200 500 1kHz 2k 5k 10k 20kHz
Model
Spec Unit RM-916
RM-916 Weight kg 1.2
(without microphone) lb 2.6
Dimensions mm 245x60x205
(W×H×D) inches 9.6x2.3x8
102
2010_gatalogue2010.3.1510:49AM페이지101
PR-091(N)A/PR-111(N)A/PR-151(N)A/PR-231(N)A,
PR-271(N)A/PR-331(N)A/PR-391(N)A
Model
Unit PR-091A PR-111A PR-151A PR-231A PR-271A PR-331A PR-391A
Spec
Weight kg 23 24 32.5 42 47 53 62.5
lb 50.7 52.9 71.6 92.6 103.6 116.8 137.8
Dimensions mm 585x508x585 585x597x585 585x844x585 585x1,200x585 585x1,378x585 585x1,645x585 585x1,912x585
(W×H×D) inches 23x20x23 23x23.5x23 23x33.2x23 23x47.2x23 23x54.3x23 23x64.8x23 23x75.2x23
Model
Unit PR-091NA PR-111NA PR-151NA PR-231NA PR-271NA PR-331NA PR-391NA
Spec
Weight kg 26.5 27.2 37.7 49.1 55 63.7 73.7
lb 58.3 59.8 83 108.2 121.3 140.4 162.4
Dimensions mm 430x315x650 520x315x650 790x315x650 1,205x290x650 1,330x290x650 1,590x290x650 1,865x290x650
(W×H×D) inches 16.9x12.4x25.5 20.4x12.4x25.5 31.1x12.4x25.5 47.4x11.4x25.5 52.3x11.4x25.5 62.5x11.4x25.5 73.4x11.4x25.5
* A : Assembly
* NA : Non assembly
Aluminum Rack Cabinet >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
PA-151D/PA-231D/PA-271D, PA-331D/PA-391D
RACK CABINETS
Model
Spec
Unit PA-151D PA-231D PA-271D PA-331D PA-391D
Weight kg 34.2 46.3 51 59.7 71.8
lb 75.4 102.1 112.4 131.6 158.3
Dimensions mm 585x885x585 585x1240x585 585x1420x585 585x1685x585 585x1955x585
(W×H×D) inches 23x34.8x23 23x48.8x23 23x55.9x23 23x66.3x23 23x77x23
103
A-60/120
The A-60 and 120 are 60 or 120watt public address amplifier with three balanced Mic inputs, allowing connections of three dynamic low-
impedance Mics. Both units have two AUX inputs. This amplifier shall be capable of 60W or 120W RMS output power and shall provide 4ohms
or 70/100V high impedance output. This amplifier is ideal for small public address application ranging from small conference room, restaurant,
small space facilities, etc.
PAM-340A/480A
The PAM-340A and 480A are 340/480W mixer/amplifiers with 6 balanced XLR inputs (with gain trim controls), permitting use with mic or line
level signals. The units features a 600ohms input for connection to a telephone system paging port. Two front panel bays permit use of
optional modular signal sources: an AM/FM tuner module(left bay only): or a CD. The units may be powered by AC mains or 24VDC, enabling
connection to a standby power supply for emergency operation. The units are ideal for small public address application ranging from small
conference room, restaurant, small space facilities, etc. The proper speaker wattage range is from 3 ~ 30Watt.
SYSTEM APPLICATIONS
104
2010_gatalogue2010.3.1510:49AM페이지 103
SYSTEM-2240M
The SYSTEM-2240M is a multi PA combination amplifier designed for applications where a variety of music and paging sources are required,
including restaurant, banquet halls, community centers and retail shops. This amplifier has 240W of output power and offers a full-logic
cassette deck, three-disc CD changer, a digital AM/FM tuner, two AUX inputs and five balanced mic inputs and shall provide 70/100V high
impedance output. The proper speaker wattage range is from 3 ~ 30Watt.
OFF
SP 1 SP 2 SP 3 SP 4 SP 5 SP 6 SP 7 SP 8 SP 9 SP 10 ALL POWER
F1
EJECT TRACK DIRECTORY
GRAPHIC EQUALIZER
10 10
0dB 0dB
10 10
MONITOR
18 20 22
0dB 16 24
12dB 14 26
OFF 12 28
10 30
8 32
CHIME
6 34
4 36
2 38
0 40
MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX
MIC 1 MIC 2 MIC 3 MIC 4 MIC 5 CD TUNER DECK AUX 1 AUX 2
PA-2000A/4000A/6000A
The PA-2000A/4000A/6000A are 60 or 120W or 240W public address mixer/amplifier with 6 balanced XLR inputs allowing connections of mic
or line-level signals via input gain trim. Channel 6 is for CD or cassette decks, with connection using a dual-summed. The unit has an input for
a 600ohms(0.775V) telephone system paging port. The units are ideal for small public address application ranging from small conference
room, restaurant, small space facilities, etc. The proper speaker wattage range is from 3 ~ 30Watt.
SYSTEM APPLICATIONS
105
Rack Systems
The PA system can be decided upon the number of speakers required and their power handling, and the number of circuits on each floor and
the size and configuration of the venues. In PA system applications, over 16 channels, extra matrix logic, indirect speaker selector, relay
group, terminal board are required. The PA system is ideal for public building, factory, hospitals, etc.
SYSTEM APPLICATIONS
106
2010_gatalogue2010.3.1510:49AM페이지 105
Figure 3
Figure 1
Figure 2
107
Speakers, Decibels, SPL Quantity of Ceiling Speakers per Sq/metre for background music
Lose 6dB each time distance Ceiling Height = 2.5m Speaker Spacing = 5m Coverage = 25Sq.m
is doubled from speaker Add 3dB when power is doubled
Floor Area Quantity of Speakers Wattage Taps in Area
Distance from speaker 1m 2m 3m 100 Sq.m 4 x Speakers Quiet 55dB Tap @1W
SPL(dB)@1W 95 89 83 250 Sq.m 10 x Speakers Normal 60dB Tap @2W
SPL(dB)@2W 98 92 86 1000 Sq.m 40 x Speakers Noisy 65dB Tap @3W
SPL(dB)@4W 101 98 92
SPL(dB)@8W 104 98 92
INSTALLATION ADVICE &
INFORMATION
108
2010_gatalogue2010.3.1510:49AM페이지 107
Low Impedance and 100V Line Systems constant impedance system and, consequently, drops along the line
Constant impedance lines (low impedance) are used normally in the are less frequent; therefore the cable gauge can be lower.
case of a low number of loudspeakers, placed at a minimum The function of the amplifier device is to raise the signal of a sound
distance from the amplifier (<20m). source, such as a microphone, CD player, cassette recorder or an
The constant voltage connection system (e.g. 100V line) offers a AM/FM tuner to a sufficient level to pilot the transducer
host of advantages making it ideal for sound systems of all sizes, LOUDSPEAKER. The amplifier has several inputs, to which the
above all in the case of long distance speaker runs. various sound sources are connected.
This connection system requires each loudspeaker to be equipped The sound sources have to be mixed (mixer) and acoustically
with its own line transformer, which adapts the impedance of the modified with tone control and equalisers to optimize listening in
loudspeaker (usually very low) to the much higher level of the line relation to the environment’s characteristics. A terminal board is also
itself. In proportion to power transmitted, the current circulating on a fitted on output indicating impedance and voltage to which the
line at 100V is considerably lower than that circulating on wires of a loudspeaker line is connected.
Figure 5
INSTALLATION ADVICE &
Figure 6
INFORMATION
109
MEMO
www.inter-m.com
March 2010