You are on page 1of 20

Program Pecutan Akhir Fizik SPM 2010    Soalan Kertas 2 Set 1  

Section A 

Question 1 
1  Diagram 1 shows a vernier callipers with its jaws are closed together.  

  Diagram 1 

  (a)  State the function of tail of the vernier callipers. 

    ……………………………………..………..…………………………………………………………………………………………... 

  [1 mark] 

  (b)  The vernier callipers has a zero error.  What is the reading of the zero error? 

    …………………………….……………………………………………………………………............................................... 

[1 mark] 

  (c)  A student using the vernier callipers to measure the internal diameter of a test tube. The 
internal diameter of the test tube recorded by the student is 2.47 cm. 
What is the actual reading of the diameter of the test tube? 

    …………………………………………………………………………………..……………….......................................... 

[1 mark] 

  (d)  Name the type of error of zero error. 

    ........................................................................................................................................................ 

[1 mark] 

Prepared by: Mohd Khairul Anuar SMK Seri Mahkota                                                                                         1  
 
Program Pecutan Akhir Fizik SPM 2010    Soalan Kertas 2 Set 1  

Question 2 
Diagram 2 shows a mass of 0.8 kg T‐shirt that is hung on the clothes line. 

 
20°  20° 
   

DIAGRAM 2 

(a) What is the base unit of the force? 

………………………………………………………………………............................................................................... 
                             [1 mark]  
 
(b) Mark and label in Diagram 2, 
(i) The tension force of the line, T, that acts on the clothes line when the T‐shirt is hung. 
(ii) The weight of the T‐shirt, W. 
[2 marks] 
(c) Using the concept of forces in equilibrium, calculate the tension force, T. 

[2 marks] 

Prepared by: Mohd Khairul Anuar SMK Seri Mahkota                                                                                         2  
 
Program Pecutan Akhir Fizik SPM 2010    Soalan Kertas 2 Set 1  

Question 3 
Diagram 3.1 shows a cross section of a Maltese cross tube used to study the characteristics of cathode 
ray. 

DIAGRAM 3.1 

 
 (a)   What is the meaning of cathode ray? 
   ……………………………………………………………………………………………........................................................ 
[1 mark] 

(b)   When switch S1 and switch S2 are turned on, two overlapping shadows are formed on the screen. 
Explain why the shadows are formed on the screen. 
        ……………………………………………………………………………………………………………………………………………………… 
        ……………………………………………………….…………………………………………………………………………………………….. 
        [1 mark] 

(c)   Calculate the velocity of cathode ray in the Maltese cross tube. 
‐19 ‐31
[The charge of electron, e = 1.6 x 10   C  and  the mass of one electron, me=  9 x 10   kg ] 

   
 
            [2 marks] 

Prepared by: Mohd Khairul Anuar SMK Seri Mahkota                                                                                         3  
 
Program Pecutan Akhir Fizik SPM 2010    Soalan Kertas 2 Set 1  

(d)   Diagram 3.2 shows a pair of magnet with opposite poles is placed at the sides of the tube. One of   
the shadow deflects. 

DIAGRAM 3.2 

 
   (i)   By using an arrow, show the direction of the shadow which deflects in Diagram 3.2. 
                         [1 mark] 
   (ii)  State the physics rule used to determine the direction of the shadow. 
         …………………………………………………………………….......................................................................... 
                  [1 mark] 

Question 4 
Diagram 4.1 shows the wing mirrors of the car which helps the driver to see objects behind the car. 

Diagram 4.1 

Prepared by: Mohd Khairul Anuar SMK Seri Mahkota                                                                                         4  
 
Program Pecutan Akhir Fizik SPM 2010    Soalan Kertas 2 Set 1  

(a)   State the type of mirror used. 
  
............................................................................................................................................................
[1 mark] 

(b) Give one reason why this type of mirror is used instead of plane mirror. 
 
............................................................................................................................................................
[1 mark] 

(c) In Diagram 4.2, shows an object in front of a mirror. C is the center of curvature of the mirror. 
 

   
Diagram 4.2 
 
(i) Calculate the focal length of the mirror. 
[1 mark] 
 
(ii) Complete the Diagram 4.2 by drawing one more ray from X on the object to show the 
formation of image by the mirror. Draw the image formed. 
[2 marks] 
(iii) State two characteristics of the image formed. 
 
.................................................................................................................................................... 

        ……………………………………………………………………………………………………………………………………………… 

[2 marks] 

Prepared by: Mohd Khairul Anuar SMK Seri Mahkota                                                                                         5  
 
Program Pecutan Akhir Fizik SPM 2010    Soalan Kertas 2 Set 1  

Question 5 
Diagram 5.1 shows water flowing out of a hole at the side of a container.  

DIAGRAM 5.1 

 
Diagram 5.2 shows water flowing out of a hole at the side of another container. 

DIAGRAM 5.2 

 
(a) What is the meaning of pressure?  
……………………………………………………………………………………………………………………………………………………  
[1 mark]  
(b)  Observe Diagram 5.1 and Diagram 5.2.  
 
(i) Compare the depth of the holes from the surface of the water.  
 
………………………………………………………………………………..…………………………………………………….. 
[1 mark]  
(ii)    Compare the horizontal distance travelled by the jet of water.  
 
………………………………………………………………………………..……………………………………………………. 
[1 mark]  

Prepared by: Mohd Khairul Anuar SMK Seri Mahkota                                                                                         6  
 
Pecutan Akhir Fizik SPM 20
Program P 010  Soalan Kertas 2
2 Set 1  

(iii)    Relate
e the horizonttal distance in
n (b)(ii) to thee pressure of w
water at the hole.  
 
   ………… ……………………… …………………… ……………………… …………………… ………………………
………………………….…..  
[1 m
mark]  
(ivv)  Relate the pressuree in the waterr to the depth
h of the waterr.  
 
………… ……………………… …………………… ……………………… …………………… ………………………
………………………………  
[1 m
mark]  
 
(c) Sttate two othe
er factors that affect the p pressure in a liquid.  
 

……………………… ………………………………………… …………………..… …………………… ……………………… …………………… ………. 
[2 m
marks]  
(d) Exxplain why a diver finds it difficult to brreathe normaally when he iis in the deep
p sea.  
 

…….……………… …………………… ………………………………………… ……..……………… ………………………………………… …….. 
 

…….……………… …………………… ………………………………………… ……..……………… ………………………………………… …….. 
[1 m
mark]  
 
Question 6 
Diagram 66.1 shows the
e propagation
n of water waaves in a ripple tank over aa Perspex platte in the shap
pe of 
a trapeziu
um. 
Diagram 66.2 shows the
e propagation
n of water waaves from the sea as they aadvance towaards the beacch. 

     

     1 
              Diagram 6.1   Diagram 6.2 

(a) Based on Diagram 6.1 and 6.2
2: 

(i) State two similarities fo
or the situatio
ons in Diagram
m 6.1 and 6.2
2. 
 
…………………………………… ………………………………………… ………………………………………… ………………………
… 

  ……………………………………
…………………………………………
…………………………………………
………………………
… 

           ……………………………………
……………………………..…………
………………………
……………………
………………………
… 

[2 m
marks] 

Prepared by: Mohd Kh
hairul Anuar SSMK Seri Mah
hkota                                                                                         7  
 
Program Pecutan Akhir Fizik SPM 2010    Soalan Kertas 2 Set 1  

(ii) Name the phenomenon observed. 
 
………………………………………………………………….…………..……………………………………………………………. 
[1 mark] 

(b)  (i)    What is happening to the distances between the wavefronts as the water waves     


  approach the beach? 
 
………………………………………………………………….…………..……………………………………………………………. 
[1 mark] 

(ii) Explain your answer in (b)(i). 
 
………………………………………………………………….…………..……………………………………………………………. 
 
………………………………………………………………….…………..……………………………………………………………. 
 
………………………………………………………………….…………..…………………………………………………………….  
                  [2 marks] 
(c) The trapezium shaped Perspex plate is replaced with a convex lens shaped Perspex plate as shown 
in Diagram 6.3. 
 

Diagram 6.3 

Draw the wave produced as the wave pass through the convex lens Perspex plate in Diagram 6.3. 

[2 marks] 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

Prepared by: Mohd Khairul Anuar SMK Seri Mahkota                                                                                         8  
 
Program Pecutan Akhir Fizik SPM 2010    Soalan Kertas 2 Set 1  

Question 7 
Diagram 7 shows the initial situation and the situation after 5 minutes when water is being boiled by an 
electric heater of power 1000 W. 

 
Diagram 7 
(a) What is the meaning of temperature? 
[1 mark] 
(b) Based on Diagram 7; 
(i) State one reason why the temperature does not increase even though heat is 
supplied. 
 
…………………………………………………………………………………………………………………………………. 
[1 mark] 
(ii) Calculate the heat energy released by the immersion heater in 5 minutes. 
 
 
[2 marks] 
(iii) Calculate the specific latent heat of vaporization of water in the above process. 
 
 
 
 
[3 marks] 
(c) The actual value of specific latent heat of vaporization of water is 2.26 x 106 J kg‐1. 
(i) Explain why the value obtained in (b)(iii) is different from the actual value. 
 
………………………………………………………………………………………………………………………………………… 
 
………………………………………………………………………………………………………………………………………… 
[1 mark] 
 

Prepared by: Mohd Khairul Anuar SMK Seri Mahkota                                                                                         9  
 
Program P
Pecutan Akhir Fizik SPM 20
010  Soalan Kertas 2
2 Set 1  

(ii) Suggesst two modifiications to the arrangement of apparattus in Diagram m 7 that will ggive a 


ue of specific latent heat off vaporization
more aaccurate valu n of the wateer. 
 
………………………………… …………………… ……………………… …………………… ……………………… …………………… ………… 
 
………………………………… …………………… ……………………… …………………… ……………………… …………………… ………… 
[2 m
marks] 
 
Question 8 
8  Diagraam 8 shows aan electric bell produces so
ound waves.     

Diagram 8  

(a) (i)    Name the type of w


wave produceed by the elecctric bell. 
 
............................................................................................................................................... 
                                                                                                           [1 m
mark] 
 

(ii)   what happen to 
When the air in thee electric bell is sucked outt by using vaccuum pump, w
the sound produced? 

............................................................................................................................................... 
                                                                                                            [1 m
mark] 
(iii) Give o one reason for the answer in 8 (a) (ii). 
 
............................................................................................................................................... 
                                                                                                           [1 mmark] 
 
(b) Diagram 8.2 sh hows a sound d wave form p produced by aa tuning fork displayed on the screen o of 
caathode ray osscilloscope. 

Prepared by: Mohd Kh
hairul Anuar SSMK Seri Mah
hkota                                                                                         10  
 
Program Pecutan Akhir Fizik SPM 2010    Soalan Kertas 2 Set 1  

                        Diagram 8.2 

On Diagram 8.3, draw the sound wave form produced when the loudness is increased. 

                        Diagram 8.3 

 [1 mark] 

(c) Diagram 8.4 shows an electromagnetic wave spectrum. 

Radio wave  Microwave  P Visible light  Q X‐ray  Gamma ray 

  Diagram 8.4   

(i)  Name the wave for; 
 
  P : …………………………………………………………………… 
 
  Q : …………………………………………………………………… 
[2 marks] 
 

Prepared by: Mohd Khairul Anuar SMK Seri Mahkota                                                                                         11  
 
Program Pecutan Akhir Fizik SPM 2010    Soalan Kertas 2 Set 1  

(ii)  Choose one wave that harmful to human body. 
           
  ............................................................................................................................................ 
[1 mark] 

(iii)   Give one reason for the answer in 8 (c) (ii). 

……....................................................................................................................................... 
                                                                                                                 [1 mark] 

(iv)  Choose one wave that used in telecommunications. 

………………………………………………..……………………………………………………………………………………… 
                                                                                                                         [1 mark] 
(v)  Give one reason for the answer in 8 (c) (iv). 
 
       …………………………………………….………………………………………………………………………………………... 
                                                                                                               [1 mark] 
(vi)  Choose the suitable wave that can be used in cancer treatment. 
 
  ……....................................................................................................................................... 
                                                                                                            [1 mark] 

 (vii)  Give one reason for the answer in 8 (c) (vi). 

    ................................................………………………………………………………………………………………... 
                                                                                                                              [1 mark] 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Prepared by: Mohd Khairul Anuar SMK Seri Mahkota                                                                                         12  
 
Program Pecutan Akhir Fizik SPM 2010    Soalan Kertas 2 Set 1  

Section  B 

Question 9 

Diagram 9 shows a ball placed onto smooth incline plane at point P.  The ball is rolling down over the 
incline plane caused by gravitational potential energy.  Point Q and point R are at the middle of the 
incline plane and at the ground respectively. 

                                                                                u = 0 m s‐1 

                                                                                   

 
Q  5 m
 
Incline Plane 
 

 
          
      60o
Ground  R 
  Diagram 9 

  (a)  What is meant by gravitational potential energy?                     [1 mark] 

  (b)  (i)  Using Diagram 9, compare the height of the ball, the gravitational potential energy  


      of the ball, the velocity of the ball and the kinetic energy of the ball at point P and  
      point Q. 

      Deduce the relationship between the kinetic energy and the gravitational potential  
      energy of the rolling ball.                 

 [5 marks] 

(ii) Name the physical principle involved in (b)(i).             


[1 marks] 

  (c)  Explain what happens to the velocity of the ball when it reaches point R on the ground.  

[3 marks] 

     

Prepared by: Mohd Khairul Anuar SMK Seri Mahkota                                                                                         13  
 
Program Pecutan Akhir Fizik SPM 2010    Soalan Kertas 2 Set 1  

(d) Based on the physical principle above, you are required to design a roller skate track. 
  Using appropriate physics concept, explain the design of the roller skate track so that it can 
  be used to oscillate skate board continuously. 

    Your answer should include the following aspects: 

    (i)  Shape of the track 

    (ii)  Slope of the track 

    (iii)  Surface of the track 

    (iv)  Safety features     

[10 marks] 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Prepared by: Mohd Khairul Anuar SMK Seri Mahkota                                                                                         14  
 
Program P
Pecutan Akhir Fizik SPM 20
010  Soalan Kertas 2
2 Set 1  

Question 10 
Q
(aa) Diagram 10
0.1 and Diagraam 10.2 show
ws two identiccal electromaagnet, X and YY.

 
Diagram 10.1                                                   Diagram 1
10.2  

(i) What is meant by eleectromagnet??   
   [1 m
mark] 

(ii) Using Diagram 10.1 aand Diagram 1 10.2 comparee the current flow, the amount of iron ffiling 


and the magnetic field strength off the two elecctrodes. Relatte the currentt flow and am
mount 
of iron fiiling attracted
d by the electtromagnet an
nd the magneetic field stren
ngth. 
  [ 5 m
marks ] 

  (b)  Diagram 10.3 shows an electric bell. 

hamm
mer

coil

 
 
 
 
switch 
 
 
 
Diagram 10.3 
Explain how the electric b
bell works.   
      
       [ 4 m
marks] 
 

Prepared by: Mohd Kh
hairul Anuar SSMK Seri Mah
hkota                                                                                         15  
 
Program Pecutan Akhir Fizik SPM 2010    Soalan Kertas 2 Set 1  

(d) A man needs an adaptor to charge his handphone as shown in Diagram 10.4.  
The transformer inside the adaptor is used to reduce the 240 V alternating current (a.c) to 12 V 
direct current (d.c).  

Diagram 10.4

Using the knowledge of a transformer and rectification, suggest and explain how to build an adaptor 
which can be used to charge the handphone.  
 
(i) The type of transformer  
(ii) The ratio of number of turns in primary coil to the number of turns in secondary coil  
(iii) The type of core  
(iv) The electronic component that should be connected to the output of the secondary coil  
(v) The material of wire used  
 
[10 marks]  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Prepared by: Mohd Khairul Anuar SMK Seri Mahkota                                                                                         16  
 
Program Pecutan Akhir Fizik SPM 2010    Soalan Kertas 2 Set 1  

Section C 
 
Question 11 
Diagram 11.1 shows two convex lenses, P and Q, used in an astronomical telescope. The focal length of 
P is 40 cm and for Q is 10 cm. 

 
Diagram 11.1 

(a) What is the meaning of focal length of lens? 
[1 mark] 
 
(b) By using suitable apparatus, explain how the focal length of both lenses can be estimated. 
[4 marks] 
 
(c) Diagram 11.2 shows an arrangement of lenses to construct a simple astronomical telescope 
using lens P and lens Q.  
 
Diagram 11.2        Objective lens  

Eye piece 

Meter Ruler 

Observer     

You are asked to investigate the arrangement and characteristics of the lenses used to construct the 
simple astronomical telescope as shown in Diagram 11.3. 

  

Prepared by: Mohd Khairul Anuar SMK Seri Mahkota                                                                                         17  
 
Program Pecutan Akhir Fizik SPM 2010    Soalan Kertas 2 Set 1  

Arrangement  Focal length of  Magnification  Distance between  Diameter of 


objective lens, fo  of image  objective lens and  objective lens, d 
of lenses  /cm  eye piece, D / cm  /cm 

J  40.0  4.00  50.0  Large 

K  40.0  0.25  60.0  Small 

L  10.0  4.00  50.0  Large 

M  10.0  0.25  60.0  Small 

Diagram 11.3 

Explain the suitability of each characteristic of the lenses and determine the arrangement which 
can produce the brightest and sharp image at normal adjustment. 

[10 marks] 

(d)   A camera has a convex lens of focal length 5 cm is used to capture an object of 1 m in 
height and 4 m from the camera. 

 (i)     Determine the image distance from the camera 

       [2marks] 

(ii)   Calculate the height of image produced in the camera 

                   [2marks] 

(iii)   State the characteristics of image formed in the camera 

[1 marks]  

Prepared by: Mohd Khairul Anuar SMK Seri Mahkota                                                                                         18  
 
Program Pecutan Akhir Fizik SPM 2010    Soalan Kertas 2 Set 1  

Question 12 
Diagram 12.1 shows part of   Uranium‐238 radioactive decay series. 
  Nucleon 
 
Number 
       
240 
           238
  92 U  
238 
           
  236 
    234
90Th
    Pa   234
234
92 U  
91
  234   
           
  232 
           
Diagram 12.1 
230 
        230
90Th
   
228 
             
226 
    Ra    
226      
  88
224 
           
  Proton 
222 
  87  88  89  90  91  92   93  Number 
 
(a) What is the meaning of radioactive decay?   
[1 mark] 
(b) Based on Diagram 12.1; 
(i) Uranium,  238 234
92 U decays to Thorium, 90Th . Write an equation to show the decaying 

process.                                                                    
 [1 mark] 
(ii) Explain the changes in the nucleus of uranium‐238 during the decaying process                                               
[2 marks] 
 
(iii) Determine the number of alpha particles and beta particles produced by the radioactive 
decaying series shown in Diagram 12.1.          
[2 marks]      
234
(iv) The half life of  91 Pa  is 6.7 hours and initially has a mass 32 g.  
What is the mass of Pa‐234 after 33.5 hours?                                               
[2 marks] 
 
 
 
 
 
 
 

Prepared by: Mohd Khairul Anuar SMK Seri Mahkota                                                                                         19  
 
Program Pecutan Akhir Fizik SPM 2010    Soalan Kertas 2 Set 1  

(c) Diagram 12.2 shows a leakage of an underground water pipe line. Radioactive source is used to 
detect the spot of the water leakage. 

 
Diagram 12.2 
    Explain how a radioactive source is used to detect the spot of the water leakage from the pipe.                                 
[2 marks] 
 
(d) You are asked to investigate the characteristics of five radioactive sources shown in 
Table 12.  Explain the suitability of each characteristic of the radioactive sources and 
determine the most suitable radioactive source which can be used to locate the water 
leak.  Give reasons for your choice.                                                                             [10 marks] 
 
         Penetrating  Emitted  Half‐life  State of 
  Radioactive  power  Radiation  Separuh  matter  
source  Kuasa  Sinaran  Hayat  Keadaan 
Sumber radioaktif  Penembusan  dipancarkan  jirim 
P  Low  Alpha – α  16 hours  Solid  
Rendah  Alfa – α  16 jam  Pepejal 
Q  Medium   Beta – β  20 days  Liquid 
Tinggi  Beta – β  20 hari  Cecair  
R  Medium  Beta – β  15 hours  Liquid 
Sederhana  Beta – β  15 jam  Cecair  
S  High  Gamma – γ  40 minutes Solid  
Tinggi  Gamma – γ  40 minit  Pepejal 
T  High  Gamma – γ  10 hours  Liquid 
Tinggi  Gamma – γ  10 jam  Cecair  
Table 12 

             

Prepared by: Mohd Khairul Anuar SMK Seri Mahkota                                                                                         20  
 

You might also like