You are on page 1of 32

ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK

FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

FROM BENTLEY USA

STAAD.Pro is the choice of 47 out of 50 leading Structural Engineering firms, 46 out of 50 state
DOTs and 7 out of the top 10 engineering universities. STAAD.Pro features a state-of-the-art user
interface, visualization tools, powerful analysis and design engines with advanced finite element and
dynamic analysis capabilities. From model generation, analysis and design to visualization and result
verification, STAAD.Pro is the professional’s choice for steel, concrete, timber, aluminum and cold-
Any misuse of this file, will lead to cancellation of admission.

formed steel design of low and high-rise buildings, culverts, petrochemical plants, tunnels, bridges,
piles and much more!
Do not try to copy this file or carry this file out of this machine

Why STAAD.Pro?

• STAAD.Pro was developed by practicing engineers for practicing engineers around the globe.
It has evolved over 25 years and is constantly guided by a premier industry-based steering
ECC’s Intellectual Property.

committee. For static, pushover, dynamic, P-delta, buckling or cable analysis, STAAD.Pro is
the industry standard.
• STAAD.Pro meets the rigid requirements of NUPIC/NRC (Nuclear Regulatory Commission)
by conforming to the 10CFR PART 50, APPENDIX B, Section II, "Quality Assurance
Program" and ASME NQA-1-2000 (Quality Assurance Requirements for Nuclear Facility
Applications) standards. Development, maintenance, and support are all based upon the highest
quality standards.
• STAAD.Pro has building codes for most countries including US, Britain, Canada, Russia,
Australia, France, Germany, Spain, Norway, Finland, Sweden, India, China, Euro Zone, Japan,
Denmark, and Holland. More are constantly being added.
• STAAD.Pro is fully COM (Component Object Model) compliant and is designed using an
open architecture. Any third party or in-house application can be seamlessly integrated with
STAAD.Pro. Also, STAAD.Pro can be customized to perform the specific structural
requirements of the user.
• STAAD.Pro's User Interface is the industry standard. Complex models can be quickly and
easily generated through powerful graphics, text and spreadsheet interfaces that provide true
interactive model generation, editing, and analysis. STAAD.Pro easily generates
comprehensive custom reports for anagement, architects, owners, etc. Reports contain only the
information you want, where you want it. Add your own logo as well as graphical input and
output results. Export all data to Microsoft Word or Microsoft Excel!
• STAAD.Pro suports multi-material design codes such as timber, steel, cold-formed steel,
concrete and aluminum. Over the past 25 years, our customers have designed everything from
residential buildings to skyscrapers to tanks to tunnels and even a piano! STAAD.Pro's
dynamic and soil-structure interaction capabiliities along with our exhaustive design output sets
STAAD.Pro apart from our competitors.

Bentley Systems, Incorporated provides software for the lifecycle of the world’s infrastructure. The
company’s comprehensive portfolio for the building, plant, civil, and geospatial verticals spans
architecture, engineering, construction (AEC) and operations. With revenues now surpassing $400
million annually, and more than 2000 colleagues around the world, Bentley is the leading provider of
AEC software to the Engineering News-Record Top 500 Design Firms and major owner-operators and
was named the world’s No. 2 provider of GIS/geospatial software solutions in a recent Daratech
research study.

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Products from Bentley


Advanced Routing and Permitting System (ARPS)
Truck routing and automated permit issuing software
AutoPLANT Equipment
3D parametric equipment modeling using object-oriented technology
AutoPLANT Isometrics
Piping isometric drafting using "spec-driven" routing and component placement
AutoPLANT P&ID
Intelligent plant schematics and scaleable use of external relational databases
Any misuse of this file, will lead to cancellation of admission.

AutoPLANT Structural Detailer


3D structural design and NC and PPS/ERP detailing
Do not try to copy this file or carry this file out of this machine

AutoPLANT Structural Engineering


3D structural design, modeling and detailing
AutoPLANT Structural Modeler
Quick generation of accurate 3D structural steel models
ECC’s Intellectual Property.

Bentley Architecture
BIM for architectural design and documentation
Bentley Arenium
Collaborative, Model-Based Design for Civil Engineering
Bentley AutoPIPE
Calculate piping code stresses, loads and deflections under static and dynamic loading
conditions
Bentley AXSYS®.Engine
Consolidation of engineering schematic documents and project information into an
integrated database environment.
Bentley AXSYS®.Integrity
Fully integrated, risk-based inspection planning and data management
Bentley AXSYS®.Process
Front-End Engineering Design for Process Engineering
Bentley Building Electrical Systems
BIM for Design and Documentation of Building Electrical Systems
Bentley Building Mechanical Systems
BIM for design and documentation of air-handling and plumbing systems
Bentley CADscript
High Quality Presentation and Publishing Made Simple
Bentley CloudWorx
Accurate, comprehensive as-built models in the form of laser-scanned point clouds
Bentley Coax
Design and management of coax networks
Bentley Connector for mySAP.com
Integrates MicroStation workflows and DGN-based content with SAP enterprise
resource management systems
Bentley Connectors
Copy electronic renditions, metadata and archived copies of design files to third-party
ECM systems

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Bentley Copper
Design and management of outside plant copper networks
Bentley Data Manager
A comprehensive set of tools for managing project data and reports
Bentley Datasheets
Produce instrumentation and equipment datasheets while employing electronic
synchronization
Bentley Descartes
The most comprehensive imaging solution in the world
Bentley DigitalPlant Solutions
Any misuse of this file, will lead to cancellation of admission.

Data-Centric Plant Design and Management


Bentley Driver Packs
Do not try to copy this file or carry this file out of this machine

Support for popular wide-format plotters and industry-standard raster formats


Bentley Expert Designer
A full featured, integrated software solution for geospatial facility design
Bentley Facilities
BIM for operational management of space and assets
ECC’s Intellectual Property.

Bentley Facilities Inquirer


Full access to facilities data via a Web browser
Bentley Facilities Manager
Author and maintain facilities-related information in a non-graphical (Windows)
environment
Bentley Facilities Planner
Track corporate assets from deployment to decommissioning
Bentley Facilities Reports
Create and run Microsoft Access 2000 formatted reports against Bentley Facilities data
sources
Bentley Fiber
Design and management of fiber outside plant networks
Bentley Geo Web Publisher
Comprehensive solution for publishing geospatial information via the Web
Bentley Geo Web Publisher for Communications
A comprehensive solution for publishing intelligent network information
Bentley Geospatial Management
Spatially Relating All Your Content in ProjectWise
Bentley Hookups
Efficiently access and manage instrument installation detail drawings
Bentley I/RAS B
Conversion, revision and restoration for legacy drawings and records
Bentley Inside Plant
Design and document inside plant for communications networks
Bentley Instrumentation and Wiring
Define and deliver project instrumentation data using a CAD-independent drawing
generation engine
Bentley Interference Manager
Powerful interference detection with flexible rules-based configuration

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Bentley MAPscript
Distributed Map Publishing and Plotting
Bentley MXRENEW
Road renewal and rehabilitation
Bentley MXROAD
String-based modeling for road and highway design
Bentley MXURBAN
Road design for cities and suburbs
Bentley Navigator
Visualize, navigate, and interact with graphical and non-graphical facility information
Any misuse of this file, will lead to cancellation of admission.

Bentley OnSite
Electronic Field Book for Stakeout and Inspection
Do not try to copy this file or carry this file out of this machine

Bentley Piping
Interactively route pipelines and place piping components in a 3D MicroStation or
AutoCAD environment
Bentley PlantFLOW
Pipe network flow analysis using real-world 3D geometry
ECC’s Intellectual Property.

IsoExtractor
Fully automatic isometric drawings from a 3D piping model
Bentley PowerCivil
Complete Land Development Solution
Bentley PowerMap
A full-function production mapping solution
Bentley PowerMap Field
A field data collection and as-built reporting solution
Bentley PowerMap Field for Communications
Field data collection and as-built reporting for communications
Bentley PowerRebar
Reinforced Concrete Detailing and Scheduling
Bentley PowerSurvey
Field-to-Finish Survey Data Management
ProjectWise Connector for Oracle
For mapping and engineering workflows where Oracle is the enterprise data store
Bentley Publisher
Powerful, server-based publishing of engineering information over the Internet
Bentley PULS
Digital piping pulsation analysis
Bentley Rail Track
Railway Alignment Optimization
Bentley Rebar
Reinforced Concrete Detailing and Scheduling
Bentley Redline
The complete viewing, redlining, and printing solution for DGN and DWG content
Bentley speedikon Architectural
A single architectural BIM application for MicroStation and AutoCAD
Bentley Structural
BIM for design and documentation of structural systems

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Bentley Transportation Data Manager (TDM)


Management of road and rail inventory data
Bentley View
A CAD file viewing application that can open, view, and print DGN, DWG and DXF
file formats
Bentley Vision
Management of critical plant data and documents for the lifecycle of your plant
Bentley Wastewater
Comprehensive Engineering and Management for Wastewater Networks
Bentley Water
Any misuse of this file, will lead to cancellation of admission.

Comprehensive engineering and management for water networks


CivilStorm
Do not try to copy this file or carry this file out of this machine

Comprehensive stormwater modeling and analysis


CulvertMaster
Culvert hydraulic analysis and design
Darwin Calibrator
Automated model calibration for water distribution systems
ECC’s Intellectual Property.

Darwin Designer
Optimized design and rehabilitation for water distribution systems
Digital InterPlot
Complete plot management, hard copy and digital plot creation, storage and distribution
Elementary Electrical Diagrams
Advanced electrical computer-aided design (ECAD) and data management
FlexUnits
Engineering units conversion utility
FlowMaster
Hydraulic analysis for open channels, pipes, weirs, and orifices
GeoMacao
Production road design following European standards
GEOPAK Bridge
Powerful, intelligent bridge modeling
GEOPAK Civil Engineering Suite
Addresses the full range of civil design disciplines with a complete set of solutions
GEOPAK Site
Dynamic and flexible site design for all project phases
GEOPAK Survey
Geodetic conversions and feature mapping in a graphical environment
GISConnect
Edit ArcGIS data directly from AutoCAD
HAMMER
Water hammer and transient analysis software
HEC-Pack
From floodplain hydrology to river analysis
InRoads
Road and site design with advanced DTM capability
InRoads Bridge
3D modeling for highway bridge design

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

InRoads Site
Site design and digital terrain modeling
InRoads Site Suite
An integrated toolset for land development and site modeling
InRoads Storm and Sanitary
Intelligent pipe network design for storm and sanitary networks
InRoads Suite
A comprehensive solution for transportation design
InRoads Survey
Transfer survey data from electronic field books to MicroStation or AutoCAD
Any misuse of this file, will lead to cancellation of admission.

Bentley Location Data Manager


Enables use of multiple location referencing methods
Do not try to copy this file or carry this file out of this machine

Bentley Location Data Manager Express (LDMx)


Store, reference, manage and analyze location data stored in an Oracle database
MicroStation
Integrating a comprehensive software portfolio of vertical applications
MicroStation GeoGraphics
ECC’s Intellectual Property.

Premier mapping, data collection, editing, cleanup and analysis


Bentley PowerDraft
The premier 2D/3D production drafting solution
Optram Condition Modules
Connectors to track, rail, and power condition information
Optram Enterprise Asset Management Interface
Seamless exchange of infrastructure work data
Optram Enterprise Suite
Enterprise solution for rail infrastructure management
Optram GIS Interface
Interoperability with standard GIS systems
PlantSpace Equipment
3D parametric equipment modeling
PlantSpace Isometrics
Piping isometric drafting using "spec-driven" routing and component placement
PlantSpace Orthographics
Automatic annotation and dimensioning for producing MicroStation project
deliverables from PlantSpace physical (3D) models
PlantSpace P&ID
Process and instrumentation diagrams deployable for design or operations
PlantSpace Raceways
3D modeling system with "spec-driven" routing and conduit and cable tray placement
PlantSpace SupportModeler
Pipe support design with 3D modeling and detail creation
PlantWise
Optimizing plant functionality and cost
PondPack
Detention pond analysis and design
ProjectWise
Connecting People and Information Across the Distributed Enterprise

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

ProjectWise Connector for ArcGIS


Enables Interoperability with ESRI Enterprise Geodatabases
ProjectWise Integration Server
Project Collaboration Across a Distributed Enterprise
ProjectWise InterPlot
Publishing Solutions for Accurate and Intelligent Project Deliverables
ProjectWise Lifecycle Server
A standards-based engineering data warehouse, with supporting applications for
engineering automation and asset information management
ProjectWise Navigator
Any misuse of this file, will lead to cancellation of admission.

Visual Collaboration for Immersive Project/Design Review and Analysis


ProjectWise StartPoint
Do not try to copy this file or carry this file out of this machine

Entry-level collaboration based on Microsoft SharePoint


RAM Advanse
The Structural Engineer’s Toolkit System
RAM Concept
Advanced Design of Reinforced and Post-tensioned Concrete Slabs and Mats
ECC’s Intellectual Property.

RAM Connection
Everything you need in Steel Connection Design
Right-of-Way Office
Capture, query, display and report project and parcel information
SCADAConnect
Seamless integration of SCADA and hydraulic modeling
SELECT Server
Streamlining license management and administration
SewerCAD
Wastewater collection modeling and design
SewerGEMS
Urban sanitary and combined sewer modeling and management
Skelebrator
Network simplification for water distribution systems
STAAD.Pro
The World's # 1 Structural Analysis and Design Software
StormCAD
Storm sewer design and modeling software
WaterCAD
Water distribution modeling and management
WaterGEMS
Water distribution modeling and management
WaterSAFE
Infrastructure security and vulnerability analysis for water distribution systems
Bentley WinNOZL
Local stress analysis for nozzle/vessel junctions

*******

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

A few Structures Designed using STAAD.Pro


Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine
ECC’s Intellectual Property.

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Introduction to STAAD.pro Screen Management

The Pages in the Modeling Mode

Setup | Job Page

Geometry | Beam Page


Geometry | Plate Page
Geometry | Solid Page
Any misuse of this file, will lead to cancellation of admission.

General | Property Page


Do not try to copy this file or carry this file out of this machine

General | Spec Page


General | Support Page
General | Load Page
General | Material Page
ECC’s Intellectual Property.

Analysis/Print | Pre-Print Page


Analysis/Print | Analysis Page
Analysis/Print | Post-Print Page
Design Page

At the end of this training, the participant would be able to….


1. Analyze and Design and Beam, any load, any boundary condition.
2. Analyze and Design any 2D- Frame, any load, any boundary condition any geometry.
3. Analyze and Design 3D RCC Skeletal Structures for
a. Static Loads (Prior knowledge on IS456 is essential)
b. Wind loads (Prior knowledge on IS875 is essential)
c. Earthquake loads (Prior knowledge on IS1875 is essential)
d. Project- G+5 Apartment building.
4. Analyze and Design Steel Structures
a. 2D Steel Structures
b. 3D Steel Structures

Have Doubts in Lab:

1. Open Workbooks Folder and go to STAAD Multimedia Demos folder. You will have
18 files for the entire STAAD.Pro and click the file concerned to your class and listen it
for 5 to 15 minutes, the concept where you have a doubt. Then proceed further..
2. Ask your colleague to the right or/& left. Let them clarify the doubt you have. If all the
three are not clear in the area, then better watch the “Multimedia demos” and then call
the staff, if further required. If such example, class is not covered in the multimedia
demo, then call your Lab staff for clarification.

We expect a discussion on the subject among yourself to sharpen your brains. So, we try to
avoid spoon feeding in the computer lab.

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

STAAD/Pro Screen Organization


A sample of the STAAD/Pro screen is given in Figure below. The screen has five major
elements as described below.
Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine
ECC’s Intellectual Property.

Menu bar
Located at the top of the screen, the Menu bar gives access to all the facilities of
STAAD/Pro.

Toolbar
The dockable Toolbar gives access to the most frequently used commands. You may
also create your own customized toolbar.

Main Window
This is the largest area at the center of the screen, where the model and the results are
displayed.

Page Control
The Page Control is a set of tabs that appear to the left of the Main Window. There are
two rows of tabs for accessing Pages and Subpages. Each Page allows access to
certain Subpages. Each Subpage allows you to perform specific tasks. The organization
of the Pages, from top to bottom, represents the logical sequence of operations, for
example, definition of beams, specification of member properties, loading, and so on.

Each "Page" tab has a name and an icon for easy identification. The name on the tabs
may or may not appear depending on your screen resolution and the size of the
STAAD/Pro window. However, the icons on the Page Control tabs always appear.

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

The Pages in the Page Control area depend on the Mode of operation. The Mode of
operation may be set from the Mode menu from the Menu bar.

Data Area
The right part of the screen is called the Data Area, where different dialog boxes, tables,
list boxes, etc. appear depending on the type of operation you are performing. For
example, when you select the Geometry | Beam Page, the Data Area contains the Node-
Coordinate table and the Member-incidence table. When you are in the General | Load
Page, the contents of the Data Area changes to display the currently assigned Load
Any misuse of this file, will lead to cancellation of admission.

cases and the Load Specification dialog box.


Do not try to copy this file or carry this file out of this machine

Notes:

1. Note that the tables and other dialog boxes in the Data Area are physically separate
windows. In other words, you may move the Beam table or the Node table from their
ECC’s Intellectual Property.

usual right corner position. If you need to see more of the Main Window, simply
maximize it. You may still access the data tables by using the Window menu from the
Menu bar.

2. The icons in the toolbar as well as in the Page Control area offer Tooltip help. If you
are not sure what a particular icon represents, simply move your mouse on top of the
icon and wait a moment. A floating Tooltip help will identify the icon.

3. The STAAD/Pro menu items are not "Page"-dependent. This means that you may
access any menu item at any point in time. For example, in the Geometry | Beam
Page, you may select menu command sequence Commands | Material Constants |
Material Table… to edit a material table. Similarly, the Toolbar items are also
independent of the Page.

Problems follow…..
Notes: Assume dimensions or distances wherever not given.

Day-1:
Solve the problem as explained by the tutor in the class. Do not refer this work book.

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Day-2: Analyze the below beam structures in kns and met units. Watch the deflection
diagrams, BM and SF Diagram.
Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine
ECC’s Intellectual Property.

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Day-3:- Analyze the below beam structures in kns and met units. Watch the deflection
diagrams, BM and SF Diagram.
Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine
ECC’s Intellectual Property.

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Day-4: Extra Practice

Make sure to solve these problems in Pounds and Feet.


Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine
ECC’s Intellectual Property.

Find the Deflection at B, C & D in MM.

Find the Deflection at B & C.

A & B are pin joints as shown above. Find Max +ve and Max –ve moments & deflection at C

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

ASSIGNMENT

1. Draw the Bending moment Diagram for a Simply supported beam with UDL
2. Draw the Bending moment Diagram for Cantilever beam with UDL
3. Draw the Bending moment Diagram for a Two Span continues beam with UDL
4. Draw the Bending moment Diagram for a Fixed beam with UDL
5. Draw the Bending moment Diagram for a propped cantilever beam with UDL
Any misuse of this file, will lead to cancellation of admission.

6. Draw the Bending moment Diagram for a pinned one span beam with centre moment.
7. Draw the Bending moment Diagram for a fixed beam with centre moment.
Do not try to copy this file or carry this file out of this machine

8. Draw the Bending moment Diagram for portal frame with centre moment.

Sign Convention:
Draw BM curve on the tension side.
ECC’s Intellectual Property.

Note: The MD may check whether the student has drawn the BMD figs for the above problems any
day after 6th day.

So, Make sure you draw them and get ready to show whenever asked..

Have Doubts in Lab:


1. Open Workbooks Folder and go to STAAD Multimedia Demos folder. You will have
18 files for the entire STAAD.Pro and click the file concerned to your class and listen it
for 5 to 15 minutes, the concept where you have a doubt. Then proceed further..
2. Ask your colleague to the right or/& left. Let them clarify the doubt you have. If all the
three are not clear in the area, then better watch the “Multimedia demos” and then call
the staff, if further required. If such example, class is not covered in the multimedia
demo, then call your Lab staff for clarification.

We expect a discussion on the subject among yourself to sharpen your brains. So, we try to
avoid spoon feeding in the computer lab.

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Day – 5: Analyze and Design the below portal frame for five load combinations.
Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine
ECC’s Intellectual Property.

18 18

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Day-6:- Additional Problem on Load Combination and frame problems to use loads in
Gx direction.
Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine
ECC’s Intellectual Property.

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Continue …. Day-6: Moving Loads Concept


Problem: Take a beam of span 10 metres and give three loads 20kn, 30kn and 40kn at
distances of 0.5m and 0.75m moving from extreme left support to right. Find BMD for all
load positions taking load increments of 0.5m.
Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine

Problem
Analyze the beams with varying cross sections and watch the change in BM flow when
compared to a figure of uniform cross section of size 230 x 450 mm
ECC’s Intellectual Property.

Problem: Watch the change of BMD in the process of increasing I- Value of Beam.
Portal Frame: Case-1: All rectangular cross-sections
Case-2: Beam changed to T-Section as shown in fig. below.

END OF GRAPHICAL INPUT THRU GRID


CONSULT THE INSTRUCTOR IF YOU NEED A DAY BREAK FOR THEORY CLASS

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Day-7: Graphical Input


Problem: Create a grid with x = 13.5 and y = 10.2, z=0 with z bays 3 (1.75, 10, 1.75) and y
bays 3 (4.2, 3, 3)
Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine
ECC’s Intellectual Property.

Problem: Analyze and Design the below 2D Frame. Observe the Deflection, whether the
frame is falling to the right or left.

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Practice Problem
Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine
ECC’s Intellectual Property.

Have Doubts in Lab:


1. Open Workbooks Folder and go to STAAD Multimedia Demos folder. You will have 18 files
for the entire STAAD.Pro and click the file concerned to your class and listen it for 5 to 15
minutes, the concept where you have a doubt. Then proceed further..
2. Ask your colleague to the right or/& left. Let them clarify the doubt you have. If all the three
are not clear in the area, then better watch the “Multimedia demos” and then call the staff, if
further required. If such example, class is not covered in the multimedia demo, then call your
Lab staff for clarification.

We expect a discussion on the subject among yourself to sharpen your brains. So, we try to avoid
spoon feeding in the computer lab.

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Day-8
Problem: Solve this frame as three cases, and observe the reduction of deflection.
1) Frame without any bracing.
2) Frame with 9” x 9” rcc member bracing.
3) Frame with 4” Shear wall bracing.
Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine
ECC’s Intellectual Property.

Support at Node-4 Sinks by 1cm. Find BMD of the above Structure


Day – 9 : PS

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Day-10
3D SPACE FRAMES
Problem-1
Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine
ECC’s Intellectual Property.

Load Combination: 4
1 x 1.5 + 2 x 1.5 + 3 x 1.5

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Problem-2

Analyze and Design this 2-roomed building with 2 balconies, for G+5 Structure.

Load: 1 Self weight


Load: 2: External Beams: Wall load of 12kn/m
Internal Beams: Wall load of 6kn/m
Load 3: Floor Load or 6 kn/m.
Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine
ECC’s Intellectual Property.

5m x (4m+4m): Balcony: 1.5m

Have Doubts in Lab:


1. Open Workbooks Folder and go to STAAD Multimedia Demos folder. You will have
18 files for the entire STAAD.Pro and click the file concerned to your class and listen it
for 5 to 15 minutes, the concept where you have a doubt. Then proceed further..
2. Ask your colleague to the right or/& left. Let them clarify the doubt you have. If all the
three are not clear in the area, then better watch the “Multimedia demos” and then call
the staff, if further required. If such example, class is not covered in the multimedia
demo, then call your Lab staff for clarification.

We expect a discussion on the subject among yourself to sharpen your brains. So, we try to
avoid spoon feeding in the computer lab.

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Problem-3

Analyze and Design this 2-roomed building with balconies merged in the room, for G+5
Structure.

Load: 1 Self weight


Load: 2: All Beams: Wall load of 12kn/m
Load 3: Floor Load or 6 kn/m.
Load comb-4 = 1.5 (1+2+3)
Any misuse of this file, will lead to cancellation of admission.

Dimensions:
Do not try to copy this file or carry this file out of this machine

X=4.5m, Balcony=1.5m
Z=3.5m+3.5m
ECC’s Intellectual Property.

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Day-11

Project-1
Draw the plan on your book.
Draw another figure only with column positions and beam lines.
Show the same to your STAAD. Trainer and then proceed with modeling, analysis and
design of the problem for g+2 structure.
Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine
ECC’s Intellectual Property.

This is one unit (portion) of an apartment. Ignore the thought of corridor, staircase and lift
while solving this problem..

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Day-12

Project-2
Draw the centre line plan on your book and perform the design for G+ 2 structure. This
is one unit of a multistory complex. So ignore the thought of other units, stair case, lift
etc.
Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine
ECC’s Intellectual Property.

Have Doubts in Lab:


1. Open Workbooks Folder and go to STAAD Multimedia Demos folder. You will have
18 files for the entire STAAD.Pro and click the file concerned to your class and listen it
for 5 to 15 minutes, the concept where you have a doubt. Then proceed further..
2. Ask your colleague to the right or/& left. Let them clarify the doubt you have. If all the
three are not clear in the area, then better watch the “Multimedia demos” and then call
the staff, if further required. If such example, class is not covered in the multimedia
demo, then call your Lab staff for clarification.

We expect a discussion on the subject among yourself to sharpen your brains. So, we try to
avoid spoon feeding in the computer lab.

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Day-13
Project -3 (Real-time approach)
Analyze and Design building as g+3 structure

Load: 1 Self weight


Load: 2: External Beams: Wall load of 12kn/m
Internal Beams: Wall load of 6kn/m
Load 3: Floor Load or 6 kn/m. (Slab opposite to staircase = 8 kn/sq.m)

Å-------------------------------------------7 x 3.5 m------------------------------------------Æ


Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine
ECC’s Intellectual Property.

Steps
1) Model ground floor for beam loads of 45kn/m and watch for Mz and My for
columns and also watch whether the structure has any geometry mistakes in
deflection diagram. If for any column My > Mz, rotate such columns by giving
Beta 90.
2) Then analyse the structure once again with changed Beta angles for columns and
make sure whether Mz > My.
3) Then copy the structure to 3 more floors and analyse again and watch for
deflection and ground floor column moments.
4) Now give the real loads as Load-1 (self weight), Load-2 (wall loads), Load-3 (slab
loads) and give a combination 4 as 1.5 (all loads) and analyse the structure. Watch
for deflection and also moments for columns for ground floor and moments for
beam grid for any particular floor.
5) Then, feed design commands and design ground floor typical columns and one
complete beam grid for any floor.
6) Also give 3 – 5 typical properties to columns and beams.
7) Make new view of all typical columns and watch whether the columns are passing.
8) Proceed with iterations and see that all columns are passed at ground floor level.
9) Then proceed with the design command by choosing other floor levels.
10) Then reduce the top floor column sizes if required to some extent, as part of
optimization process.

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

PERSONALITY DEVELOPMENT THROUGH BHAGAVAD GITA


• Why do you worry without cause? Whom do you fear without reason? Who can kill
you? The soul is neither born, nor does it die.
• Whatever happened, happened for the good; whatever is happening, is happening for
the good; whatever will happen, will also happen for the good only. You need not have
any regrets for the past. You need not worry for the future. The present is happening...
• What did you lose that you cry about? What did you bring with you, which you think
you have lost? What did you produce, which you think got destroyed? You did not
bring anything - whatever you have, you received from here. Whatever you have given,
Any misuse of this file, will lead to cancellation of admission.

you have given only here. Whatever you took, you took from God. Whatever you gave,
you gave to him. You came empty handed, you will leave empty handed. What is yours
Do not try to copy this file or carry this file out of this machine

today, belonged to someone else yesterday, and will belong to someone else the day
after tomorrow. You are mistakenly enjoying the thought that this is yours. It is this
false happiness that is the cause of your sorrows.
"Whatever you took, you took from God. Whatever you gave, you
ECC’s Intellectual Property.

gave to him. You came empty handed, you will leave empty handed."
• Change is the law of the universe. What you think of as death, is indeed life. In one
instance you can be a millionaire, and in the other instance you can be steeped in
poverty. Yours and mine, big and small - erase these ideas from your mind. Then
everything is yours and you belong to everyone.
• This body is not yours, neither are you of the body. The body is made of fire, water, air,
earth and ether, and will disappear into these elements. But the soul is permanent - so
who are you?
• Dedicate your being to God. He is the one to be ultimately relied upon. Those who
know of his support are forever free from fear, worry and sorrow.
• Whatever you do, do it as a dedication to God. This will bring you the tremendous
experience of joy and life-freedom forever.
The Bhagavad Gita is the essence of the Vedas and Upanishads. It is a universal scripture
applicable to people of all temperaments, for all times. It is a book with sublime thoughts and
practical instructions on Yoga, Devotion, Vedanta and Action. The Bhagavad Gita has
influenced many great thinkers over the years.

Date: First Saturday of every month from 3-5pm.


Register today, if you are interested to understand more about yourself.
Fee: Rs.100/- for which you get “Gita” book “877 pages” from Gita Press.
Class will be conducted if participants are > 25.
Pl. Note:
Students from other religions (paths) may also attend, as this program doesn’t encourage
change of path, or concentrate on “Who is God?” We just deliver the substance useful
for our students to be happy at all situations.

-THIS IS A SPECIAL LECTURE AND NOT A COMPULSION-


- ONLY INTERESTED STUDENTS ARE REQUESTED TO PARTICIPATE-
- GOD IS NOT AN ARGUMENTATIVE SUBJECT-
- UNDESTANDING SELF AND BEING GOOD AND DOING GOOD IS THE ESSENCE OF ANY RELIGION-

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Day-14

Project-4
Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine
ECC’s Intellectual Property.

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Day-15

PROJECT-5
Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine
ECC’s Intellectual Property.

END OF RCC STRUCTURES- STATIC ANALYSIS

END OF MODULE-1 OF STAAD.PRO2006

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Post Training Facilities at ECC


1. Subject brush-up.
You can revise your subject @ 3 to 4 ½ hours a day till you get a job at no cost and
at the same time you are required to work as Lab staff for the same time.
Example: If you prefer working on projects or practicing on staad.pro from 7am –
11.30am, you are required to work for another 4 ½ hours…i.e. From 11.30am –
4.30pm, ofcourse with a lunch break from 1.00-1.30pm. You may opt for a different
Any misuse of this file, will lead to cancellation of admission.

slot for teaching or practicing and need not be continues. It all depends on “how you
are occupied during the rest of the day”.
Do not try to copy this file or carry this file out of this machine

Q) If I practice and work like this for 2 months, will I be given any experience
letter?
A) Yes! Basing on your skills and attitude, you will be given an opportunity to get
ECC’s Intellectual Property.

an experience letter upto 6 months. If your performance is impressive, additionally,


we shall give you “Spoken English” Free of cost during the second month.

Q) I don’t want to work as Lab staff and just want to practice or do some projects?
Is it possible?
A) It is possible. You are required to pay Rs.1000/- for 4 weeks @ 4 ½ hours a day.

2. Placements:
Our past experience shows that we can place over 90% of Civil Engineers and we
offer placement services for which you have to consult the training director or the
placement officer with a soft copy and hard copy of your resume after 2 months of
additional practice. The placement charges would be Rs.250/- for a minimum of 5
interviews.

3. Other courses:
We have the below programs for Civil Engineers and we offer special prices for
students who have completed STAAD.Pro with us..

No Course Normal Fee Special Fee


1 AutoCAD-2D/3D Rs.3000/- Rs.2500/-
2 ARCHICAD Rs.4000/- Rs.3000/-
3 3DS Max Rs.4500/- Rs.3000/-
4 Primavera + Msp Rs.3500/- Rs.2750/-
5 STAAD-Module – II Rs.2000/- Rs.1000/-
6 Spoken English Rs.2500/- Rs.1000/-*
7 Corporate Interview Sel. Pgm Rs.2500/- Rs.1000/-
• Rs.250/- further discount upon taking 2 courses at ECC. If students prefer to work as
Lab Staff for 2 months @ 4 ½ hours a day, this would be offered free!

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world
ENGINEERS CADD CENTRE (P) LTD STAADPRO 2006 WORKBOOK
FIRST FLOOR, EUREKA COURT, BESIDE BATA, NEAR IMAGE HOSPITAL, AMEERPET, HYDERABAD.

Project for Associate Lab staff


Only for “Associate staff” who continues rendering their services for another succeeding
batch. Doubts on this will be clarified after 30 days of rendering lab services to next batch
students.
Any misuse of this file, will lead to cancellation of admission.
Do not try to copy this file or carry this file out of this machine
ECC’s Intellectual Property.

Every student look forward to get their training from a best staff and none show
interest in teaching (giving back) after acquiring the subject, even if they are free.
So, here at ECC as a policy matter, has made some policies which will encourage students
to deliver assistance for another batch on mutual beneficial terms.
------------

Feel Proud to be a “Civil Engineer”….Let us all contribute our part for a better world

You might also like