You are on page 1of 18

II/ Triển khai SMTPS, POPS trên Mdaemon

Download Mdaemon 9.5.6 tại đây : http://www.altn.com/Downloads/

Bài viết gồm 3 bước


1/ Cài đặt Mdaemon 9.5.6
2/ Cấu hình SMTPS, POPS trên Mdaemon 9.5.6
3/ Cấu hình Client
4/ Kiểm tra kết quả

Thao tác :

1/ Cài đặt Mdaemon


Ở cữa sổ cài đặt, chọn Next.

Các giá trị khác để mặc định, chọn Next


Tiến trình cài đặt bắt đầu.
Ở cữa sổ What Is Your Domain Name? Điền : dom10.com

Ở cữa sổ Please Set Up Your Fist Accout. Điền các thông tin acc Admin
Chọn Finish để hoàn tất quá trình cài đặt.

2/ Cấu hình SMTPS, POPS trên Mdaemon 9.5.6


Vào Security -> SSL/TLS/Certificates (Ctrl + L)
Check vào :
+ Enable SSL, STARTTLS, STLS supports for SMTP, IMAP, POP servers
+ Enable the dedicated SSL ports for SMTP, IMAP, POP servers

Xin certificate
Chọn Yes

Vào Security -> IP Shielding / AUTH/ POP Before SMTP (Ctrl +F8)
Chọn tab SMTP Authentication, đánnh dấu check vào :
+ Authentication is always required when mail is form local accounts
+ ... unless message is to a local account
Kiểm tra xem SMTPS và POPS đã active chưa

tạo 2 email mail1@dom10.com và mail2@dom10.com và dùng mail1 gởi thư qua mail2 xem có nhận được chưa.

3/ Cấu hình Client


Chạy Outlook Express, Diskplay name : mail1
Email address : mail1@dom10.com
E-mail Server Names :
My incoming mail server is a POP3 server
Incoming mail (POP3) : 192.168.5.10
Outgoing mail ISMTP) : 192.168.5.10
Internet Mail logon :
Vào Tools -> account -> mail -> properties acc mail1
Tab Servers : check vào My server requires authentication
Tab Advanced :
Gởi mail qua lại giữa mail1 và mail2

4/ Kiểm tra kết quả


Vào Administrative Tools -> Routing and Remote Access
Click phải lên PC10 chọn Configure and Enable Routing and Remote Access
Ở cữa sổ Routing and Remote Access chọn Next
Configuration Chọn Custom Configuration
Custom Configuration chọn NAT and basic firewall -> finish
Chọn Yes khi xuất hiện popup

Vào routing and remote access -> PC 10 -> IP Routing -> General -> Properties Lan interface
Lan Properties chọn inbound Fiters
inbound Fiters -> chọn New -> add vào port 995 và 465
Chọn vào Drop all packets except those that meet the criteria below

OK -> OK -> restart lại Routing and remote access


Client ping vào server không thấy trả lời vì server đã Filters.
Dùng mail1 gởi cho mail2 thì vẫn chạy tốt, chứng tỏ mail đang được gởi trên giao thức SMTPS và POPS

You might also like