Cut out the pattern of the Airplane including the wings. Cut the wing slits located on the center of Section A and the tail slit. Glue all parts of Section J found on the right side of the plane to corresponding sections on the left half.
Cut out the pattern of the Airplane including the wings. Cut the wing slits located on the center of Section A and the tail slit. Glue all parts of Section J found on the right side of the plane to corresponding sections on the left half.
Cut out the pattern of the Airplane including the wings. Cut the wing slits located on the center of Section A and the tail slit. Glue all parts of Section J found on the right side of the plane to corresponding sections on the left half.
1. Cut out pattern of the Airplane including the wings.
2. Cut the wing slits located on the center of section A and the tail slits located at the back of section B. 3. Cut around sides and bottom of landing gear (non-dashed line). 4. Fold Section C along dashed line to the inside of plane. 5. Fold along line between D and E and pass wheel supports structure through the wing slit on fuselage. 6. Fold Sections E, F, and G over and glue G to the bottom inside of Section A. 7. Fold the landing gear down and pass the wheel through the slit in F. 8. Repeat steps 3 through 6 for the other wing. 9. Fold Sections H and I towards the inside of the plane. 10. Pass Section H through the tail slit. 11. Fold along all remaining dashed lines. 12. Glue all parts of Section J found on the right side of the plane to corresponding sections on the left half. 13. Glue Wings (Section K) to top of Section D.