Professional Documents
Culture Documents
WWW.MOITRUONG.CO.NR
-Introduction
- Classical settler
- Lamella settler
- Chemical settling
- Rapid lamella settler
Toute reproduction interdite sans autorisation écrite préalable de Veolia
Water Solutions & Technolgies © Tous droits réservés pour tous pays
INTRODUTION
Qpeak
VH =
A
CLASSICAL PRIMARY SETTLER
100%
90%
80%
70%
Removal rate SS
60%
50%
40%
30%
20%
10%
0%
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
Hazen Velocity (m/h)
Teh Classical settler : Applications
Principals applications :
Primary treatment as only
process or before a biological
treatment
CLASSICAL PRIMARY SETTLER :
Perpignan
150 000 PE
PWWF = 5 000 m3/h
NEW SETTLERS
LAMELLA SETTLER
CLASSICAL MULTIFLO
CLASSICAL MULTIFLO
MULTIFLO : DUO
MULTIFLO : MONO
MULTIFLO : TRIO
ACTIFLO
CLASSICAL MULTIFLO and MULTIFLO MONO
Settled water
Inlet water
Valim
Vslam
C F
Sludge
LAMELLA
Under lamella
Lamella settler
LAMELLA SETTLER : Design
Velocities
Followi Peak Mirror velocity
ng (m/h)
treatlm Mixed Primary
ent sludge sludge
Settling
Multiflo (AS) 10 15
classique 6 8
/ Multiflo Mono
Chemical Treatment
WHY DO WE ADD CHEMICALS : To precipitate
Phosphorous and to be able to settle the not settable
particles (colloids)
WHAT DO WE ADD : Coagulant (Metal) + Floculant (Polymer)
+ -
MULTIFLO DUO and MULTIFLO TRIO :
Chemical + Thickening + Sludge
recirculation
Coagulant Polymer
Settled water
Inlet water
Valim
Vslam
C F
Sludge recirculation
Thickened sludge
MULTIFLO DUO and TRIO : Design
Velocities
The quality of the effluent after treatment process must comply with these
values. If the concentrations of the inlet water are above the limits, the
removal rate should be respected except for P-PO4 which must be always
less than 1 mg/l even if the inlet concentration is above 5 mg/l.
MULTIFLO TRIO : Bailongang (China)
Multiflo without recirculation
Al2(SO4)3 = 44 ppm - Polymer = 0.35 ppm
120
SS outlet (mg/l)
100
80
60
40
20
0
0 5 10 15 20 25 30 35 40 45
mirror velocity (m/h)
ACTIFLO® PROCCESS
Two technologies Combination :
- LAMELLA SETTLING : Lamella addition in a settler
- BALLASTED FLOCCULATION : combination of a floc on a
microsand support with the help of a polymer
RESULT :
• Floc more resistant to erosion
• Higher design velocities
ACTIFLO® PROCCESS
Sludge
Sludge Hydrocyclon
Hydrocyclon
Polymère
Polymère
Inlet Micro-sand
Micro-sand
Inlet Lamella
Lamella settler
settler
water
water
Settled
Settled water
water
Coagulation
Coagulation
Coagulant
Coagulant
or Injection
Injection Maturation
Maturation
P
Static
Static mixing
mixing
ACTIFLO : Microsand recovery
Settling
Actiflo AS 120
BioF 80
Rain 120
Tertiary 60 -80
ACTIFLO® :
APPLICATIONS
Principals applications :
Primary treatment
Rain water
Tertiary treatment
Biofilters washwater
MULTIFLO vs. ACTIFLO: Advantages
and selection choice
Actiflo
Multiflo
600 000 PE
Peak flow from 11000 to
21000 m3/h
Peak velocity = 115 m/h
ACTIFLO® : Principals references
2m/h
20m/h
30m/h
100m/h
With Chemical
MULTIFLO Duo
Better treatment
With Chemical and Sludge recirculation
MULTIFLO Trio
Better treatment
With Chemical and Microsand
ACTIFLO
Very good treatment; very high velocity
TAØI LIEÄU ÑÖÔÏC CUNG CAÁP TAÏI ÑÒA CHÆ DIEÃN ÑAØN
WWW.MOITRUONG.CO.NR