You are on page 1of 1

A Wide Range of Rubber Sheetings

INFINITY RUBBER SHEETINGS


MATERIAL DATA SHEET INFINITY PREMIUM GRADE RUBBER SHEET

Properties Base Polymer


Surface Finish Specific Gravity Hardness Tensile Strength Elongation at break Ageing Test Change in Hardness Change in Tensile Change in EB Compression Set

Test Method

Condition

Units NR/SBR
Smooth

Specifications EPDM
Smooth 1.4~1.5 65 - 75 Min 6 Min 250

CR
Smooth 1.4~1.5 65 - 75 Min 6 Min 250

NBR
Smooth 1.4~1.5 65 - 75 Min 6 Min 250

ISO 2781/ ASTM D 297 ISO 7619/ ASTM D 2240 ISO 37/ ASTM D 412 ISO 37/ ASTM D 412 Before Ageing Before Ageing Before Ageing Shore A Mpa %

1.4~1.5 65 - 75 Min 6 Min 250

ISO 188/ ASTM D 573

At 70C for 72 hrs

Shore A % % %

Max +8 Max -10 Max -20 Max 30

Max +8 Max -10 Max -20 Max 30

Max +8 Max -10 Max -20 Max 30

Max +8 Max -10 Max -20 Max 30

ISO 815/ ASTM D 395 Method B

At 70C for 24 hrs

General Characteristics Resistance to water Resistance to Ozone & Weather Resistance to moderate oils Service Temperature Colour Good Average Bad -30 to +80C Black Good Good Bad -30 to +80C Black Good Good Medium -30 to +80C Black Good Medium Good -30 to +80C Black

Note:

All above specifications/ dimensions are subject to standard +/- tolerances The above data sheet is only for our normal grade rubber sheets. Other material specifications are manufactured as per request The above data sheet is subject to change without prior information. DOC Code : MDS - 001 Date : 1 October 2011 Prepared By: JBS Kumar
st

Issue No : 02 Rev No : 01 Approved by ; Udaya Kumar

The information provided is believed to be accurate but the company disclaims any responsibility for consequences arising from usage of materials, in that the conditions of usage are beyond companys control

P.O. Box 61348 Jebel Ali Free Zone, United Arab Emirates Ph: +9714 8836661 Fax: +9714 8837720 Email: rubber@aldobowi.com Website: www.aldobowi.com : www:infinity-rubber.com

You might also like