The syntax to mount a remote file system using nfs is as follows: mount -F nfs the following example will MOUNT THE file system / share2 to the mount point / cartman. You can also enable the above mount command to occur on each startup of the system, you can insert the following line into your /etc / vfstab file.
The syntax to mount a remote file system using nfs is as follows: mount -F nfs the following example will MOUNT THE file system / share2 to the mount point / cartman. You can also enable the above mount command to occur on each startup of the system, you can insert the following line into your /etc / vfstab file.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online from Scribd
The syntax to mount a remote file system using nfs is as follows: mount -F nfs the following example will MOUNT THE file system / share2 to the mount point / cartman. You can also enable the above mount command to occur on each startup of the system, you can insert the following line into your /etc / vfstab file.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online from Scribd
This short article demonstrates how to mount a remote file system on Solaris. Before getting into the details, you must be logged into Solaris as the root user account.
The syntax to mount a remote file system using NFS is as follows:
mount -F nfs <remote file system> <mount point>
The following example will mount the file system /share2 located on the host cartman to the mount point /cartman: mount -F nfs cartman:/share2 /cartman You can also enable the above mount command to occur on each startup of the system, you can insert the following line into your /etc/vfstab file: #device device mount FS fsck mount mount #to mount to fsck point type pass at boot options # fd - /dev/fd fd - no - /proc - /proc proc - no - # # ---------------------------------------------- # DEFINE THE swap PARTITION # ---------------------------------------------- /dev/dsk/c0t0d0s1 - - swap - no - # # ---------------------------------------------- # MOUNT THE root PARTITION # ---------------------------------------------- /dev/dsk/c0t0d0s0 /dev/rdsk/c0t0d0s0 / ufs 1 no - # # ---------------------------------------------- # MOUNT THE swap PARTITION # ---------------------------------------------- swap - /tmp tmpfs - yes - # # ---------------------------------------------- # MOUNT /u01 # ---------------------------------------------- /dev/dsk/c0t2d0s7 /dev/rdsk/c0t2d0s7 /u01 ufs 2 yes - # # ---------------------------------------------- # MOUNT /cartman VIA NFS # ---------------------------------------------- cartman:/share2 - /cartman nfs - yes rw,soft # # ---------------------------------------------- # THE ENTRIES BELOW ARE FOR THE (D1000) EXAMPLES # ---------------------------------------------- /dev/md/dsk/d0 /dev/md/rdsk/d0 /db0 ufs 2 yes - # # -- ALL ORACLE DATA FILES # /dev/md/dsk/d0 /dev/md/rdsk/d0 /db0 ufs 2 yes - # -- ORACLE CONTROL and ONLINE REDO LOG FILES # /dev/md/dsk/d1 /dev/md/rdsk/d1 /u03 ufs 2 yes - # /dev/md/dsk/d2 /dev/md/rdsk/d2 /u04 ufs 2 yes - # /dev/md/dsk/d3 /dev/md/rdsk/d3 /u05 ufs 2 yes -