You are on page 1of 1

ADDENDUM SHEET FOR PIP PIPING LINE CLASS MATERIAL SPECIFICATION

PIP Line Class: _______________

Deviation

Addendum No.: ______________

Item
Pressure/Temperature Limits: ______________________________
Valve Trim: ___________________________________________
Valve Packing: ________________________________________
Gaskets: _____________________________________________
Bolting: _____________________________________________
PWHT for Process: _____________________________________
ERW Pipe Allowed: _____________________________________
Seamless Pipe Only Allowed: ______________________________
Welded Pipe Allowed: ___________________________________
Additional Examination Required: ___________________________
Branch Connections: ____________________________________
Special Valves: ________________________________________
Other: _______________________________________________
Other: _______________________________________________

Small Bore End Conditions


Threaded and Flanged: __________________________________
Socketweld and Flanged__________________________________
Buttweld and Flanged Only: _______________________________
Other: _______________________________________________

Small Bore Size Break Point


2 NPS and smaller for valves: _____________________________
1-1/2 NPS and smaller for fittings: __________________________
1-1/2 NPS and smaller for valves: __________________________
Other: __________________________________________________

Process Industry Practices

Page 11 of 11

You might also like