You are on page 1of 531

Product Catalog

January 2011

Power wave

Table of Contents

POWERWAVE

Table of Contents

Page Base Station Products Power Amplifier Solutions MCPA Modules Single MCPA Outdoor Booster Systems Dual MCPA Outdoor Booster Systems Triple MCPA Outdoor Booster Systems TMA Products Tower Mounted Amplifiers Power Distribution Units Current Injectors Filters Same Band Combiners T1 Diplexer/Crossband Combiners Triplexer/Crossband Combiners Duplexers Interference Filters RMDU and Enclosure Solutions MicroFlex Outdoor Enclosures RapidFlex Outdoor Enclosures SubTerra Controlled Environment Vault VersaFlex Shelter Solutions Coverage Products Repeater Products Channel Selective Standard Repeaters Band Selective Compact Repeaters Band Selective Standard Repeaters Advanced Train Repeaters Digital Repeaters In-Building and Outdoor DAS Products Public Safety Networks Bi-Directional Amplifiers LinkNet Convergence Platform Optical and RF Conversion Modules Tap-In Signal Distribution Taps Nexus FT Public Safety Commercial Wide Band Radio Heads Nexus FT Single and Dual Band Nexus FT Rack Mounts Repeater Remote Management Products IP/SNMP/GPS Repeater Remote Management Interface About Antenna Products Broadband Antennas Single Broadband Antennas Cross Polarized High Broadband Cross Polarized Antennas, 1710-2170 MHz Low Broadband Cross Polarized Antennas, 806-960 MHz Low Broadband Cross Polarized Antennas, 698-894 MHz Vertical Polarized ALP Broadband Vertical Polarized Antennas, 806-960 MHz Dual Broadband Antennas Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz

6 12 18 22 27 55 58 64 66 68 70 72 76 79 81 83

89 113 144 157 162

167 170 178 179 181 183 186 221 226 232

236 257 290 297 299 307

Table of Contents

POWERWAVE

Table of Contents

Page Triple Broadband Antennas Cross Polarized Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz Single and Dual Band Antennas Single Band Antennas Cross Polarized ALX Cross Polarized Antennas, 806-896 MHz X-Urban Cross Polarized Antennas, 824-896/870-960 MHz Vertical Polarized Omni Vertical Polarized Antennas, 806-896 MHz Urban Vertical Polarized Antennas, 824-896/870-960 MHz Dual Band Antennas Cross Polarized ALXC Cross Polarized Antennas, 870-960/1710-1880 MHz DBB90 Cross Polarized Antennas, 824-896/1710-2170 MHz Vertical Polarized ALVC Vertical Polarized Antennas, 806-896/1850-1990 MHz iRET Low Broadband Cross Polarized iRET Antennas, 698-894MHz Dual Broadband Cross Polarized iRET Antennas, 698-894/1710-2170MHz Triple High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz High Broadband Cross Polarized iRET Antennas, 2300-2700MHz Dual High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700MHz Dual High Broadband Cross Polarized iRET Antennas, 2300-2700MHz iDiplexer Antennas Multi Broadband Cross Polarized Antennas Remote Electrical Tilt (RET) Single Band RET Dual Band RET Triple Band RET iRET 8510 Master Control Unit CILOC RET System Cables Indoor Antennas Dual Band Indoor Antennas Cross Polarized Indoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz Multiband Indoor Antennas Vertical Polarized Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz Clean Site Solutions Mounting Solutions Antenna FAQ Network Management Part Number Index

318

325 327 347 355

379 390 394 408 415 422 448 452 455 458 460 464 473 482 485 488 491 498 505

510

512 515 517 523 524 526

Base Station Products

Power wave

Base Station Products


A unique combination of capabilities sets Powerwave apart from other providers when it comes to rapidly delivering cost-efficient base station solutions to operators & OEMs.

Power Amplifier Solutions TMA Products Filters

Comprehensive RF/Digital Competencies


Our engineering staff has expertise across all facets of RF and digital signal processing. Using all of these technological tools, we are able to create highly integrated base station solutions. Higher integration means fewer parts, optimum manufacturing efficiency and better value.

End-to-End System Provider


Because Powerwave is a proven provider for all categories of wireless infrastructure solutions-from antenna products to base station products to coverage products-you rely on us as a single-source and consolidate/streamline your supply chain.

Base Station Products

POWERWAVE

Base Station Products

Power Amplifier Solutions MCPA Modules Single MCPA Outdoor Booster Systems Dual MCPA Outdoor Booster Systems Triple MCPA Outdoor Booster Systems TMA Products Tower Mounted Amplifiers Power Distribution Units Current Injectors Filters Same Band Combiners T1 Diplexer/Crossband Combiners Triplexer/Crossband Combiners Duplexers Interference Filters

Page

6 12 18 22

27 55 58

64 66 68 70 72

Power Amplifier Solutions

Power wave

Powerwave offers one of the industrys largest and most diverse line of power amplifier systems for cellular, EGSM, DCS, PCS, AWS and UMTS wireless networks, with more than 350,000 MCPAs and SCPAs deployed worldwide. One key reason for this success is that we are able to rapidly roll out new solutions by leveraging the modular architecture of existing systems. Building upon field-proven components and technologies, our RF engineers are able to shorten design time and deliver systems with industry-leading density and efficiency that drive significant manufacturing, space and cost savings. This reduces both capital and operating expenses.

MCPA Modules Single MCPA Outdoor Booster Systems Dual MCPA Outdoor Booster Systems Triple MCPA Outdoor Booster Systems

Base Station Products

POWERWAVE

MCPA Modules

Power Amplifier Solutions


MCPA Modules

Title 160W Multi-Carrier Power Amplifier 135W Multi-Carrier Power Amplifier 120W Multi-Carrier Power Amplifier 170W Multi-Carrier Power Amplifier 140W Multi-carrier Power Amplifier

Range (MHz) 850

Air Interface GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA

Part Number G3L-850-160

Page 7

900

G3L-929-135

1800

G3L-1829-120

1900

G3L-1929-160

10

2100

G3L-2129-140

11

POWERWAVE

Multi-Carrier Power Amplifiers

G3L-850-160

160W Multi-Carrier Power Amplifier

ELECTRICAL SPECIFICATIONS
Band (MHz) Frequency Range (MHz) Instantaneous Bandwidth Air Interface Efficiency RF Output Power Intermodulation Distortion Harmonics Nominal RF Gain (dB) Gain Flatness Gain Variation with Temperature Input Return Loss Output Return Loss DC Input Voltage Range DC Input Current Alarms and Protections 850 869-894 25 GSM/EDGE/CDMA2000/WCDMA 18% 160W (Typical) -65 dBc Better than -13 dBm/ 1MHz 63 dB 0.5 dB 0.5 dB +/-0.5 dB 16 dB (Max) 16 dB (Max) 26 to 28 Vdc (+21 to 30 Vdc Operational) Typical: 30.5A (GSM), 29 (CDMA) Input over power, VSWR, DC failure, High temperature, Loop failure

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Connectors DC Terminal Post Connectors RF Input Connectors RF Output Connectors Alarm Output 355 x 99 x 450 (12x4x16) 24.3 N/A Sub-miniature Combo D connector for RF & Digital interfaces N/A N/A

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range Storage Temperature Range Operating Humidity Storage Humidity -33 C to 50 C -40 to 70 C 0% to 80% (non condensing) 0% to 95% (non condensing)

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-12-05

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Multi-Carrier Power Amplifiers

G3L-929-135

135W Multi-Carrier Power Amplifier

ELECTRICAL SPECIFICATIONS
Band (MHz) Frequency Range (MHz) Instantaneous Bandwidth Air Interface Efficiency RF Output Power Intermodulation Distortion Harmonics Nominal RF Gain (dB) Gain Flatness Gain Variation with Temperature Input Return Loss Output Return Loss DC Input Voltage Range DC Input Current Alarms and Protections 900 925-960 MHz 25 MHz GSM/EDGE/CDMA2000/WCDMA 19% 135W (Typical) -65 dBc (Typical) Better than -13 dBm/1 MHz 63 dB 0.5 dB 0.5 dB 0.5 dB 14 dB (Max) 16 dB (Max) 26 to 28 Vdc (21 to 30 Vdc Operational) 26A (nominal at rated power) Input over drive, VSWR, DC failure, High temperature, Loop failure, APC

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Connectors DC Terminal Post Connectors RF Input Connectors RF Output Connectors Alarm Output 355 x 99 x 450 (12x4x16) 20 21W4 Combo-D w/size 8 contact 21W4 Combo-D w/PkZ contact 21W4 Combo-D w/PkZ contact 21W4 combo-D

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range Storage Temperature Range Operating Humidity Storage Humidity -33 C to 50 C -40 C to 70 C 5% to 95% non-condensing 5% ro 95% non-condensing

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-12-06

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Multi-Carrier Power Amplifiers

G3L-1829-120

120W Multi-Carrier Power Amplifier

ELECTRICAL SPECIFICATIONS
Band (MHz) Frequency Range (MHz) Instantaneous Bandwidth Air Interface Efficiency RF Output Power Intermodulation Distortion Harmonics Nominal RF Gain (dB) Gain Flatness Gain Variation with Temperature Input Return Loss Output Return Loss DC Input Voltage Range DC Input Current Alarms and Protections 1800 1805-1880 35 GSM/EDGE/CDMA2000/WCDMA 13.4% (GSM) Typical: 120W -65 dBc (Typical) Better than -13 dBm/ 1MHz 63 dB +/- 0.5 +/-0.3 dB +/-0.5 dB 17 dB (Max) 18 dB (Max) 26 to 30 /Vdc (22 to 30 Vdc Operational) Typical: 33A (GSM), 31A (CDMA) Input over drive, VSWR, DC failure, High temperature, Loop failure, APC

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Connectors DC Terminal Post Connectors RF Input Connectors RF Output Connectors Alarm Output 355 x 99 x 450 (12x4x16) 23 21W4 Combo-D w/size 8 contact 21W4 Combo-D w/PkZ contact 21W4 Combo-D w/PkZ contact 21W4 Combo-D

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range Storage Temperature Range Operating Humidity Storage Humidity -33 C to 50 C -40 to 70 C 5% to 95% (non condensing) 5% to 95% (non condensing)

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-12-05

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Multi-Carrier Power Amplifiers

G3L-1929-160

170W Multi-Carrier Power Amplifier

ELECTRICAL SPECIFICATIONS
Band (MHz) Frequency Range (MHz) Instantaneous Bandwidth Air Interface Efficiency RF Output Power Intermodulation Distortion Harmonics Nominal RF Gain (dB) Gain Flatness Gain Variation with Temperature Input Return Loss Output Return Loss DC Input Voltage Range DC Input Current Alarms and Protections PCS 1930-1995 Up to 65 GSM/EDGE/CDMA2000/WCDMA 18.5% 170 Watts (Typical) -65 dBc Better than -13 dBm/ 1MHz 63 dB 0.5 dB 0.5 dB +/-0.5 dB 16 dB (Max) 16 dB (Max) 26 to 28 Vdc (+21 to 30 Vdc Operational) 34A@170W, 33A@160W Input over power, VSWR, DC failure, High temperature, Loop failure

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Connectors DC Terminal Post Connectors RF Input Connectors RF Output Connectors Alarm Output 355 x 99 x 450 (12x4x16) 26.4 N/A Sub-miniature Combo D connector for RF & Digital interfaces N/A N/A

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range Storage Temperature Range Operating Humidity Storage Humidity -33 C to 50 C -40 to 70 C 0% to 80% (non condensing) 0% to 95% (non condensing)

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-12-05

10

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Multi-Carrier Power Amplifiers

G3L-2129-140

140W Multi-carrier Power Amplifier

ELECTRICAL SPECIFICATIONS
Band (MHz) Frequency Range (MHz) Instantaneous Bandwidth Air Interface Efficiency RF Output Power Intermodulation Distortion Harmonics Nominal RF Gain (dB) Gain Flatness Gain Variation with Temperature Input Return Loss Output Return Loss DC Input Voltage Range DC Input Current Alarms and Protections 2100 2110-2170 60 MHz CDMA2000/WCDMA/LTE > 15% (45 MHz IBW), >14% (60 MHz IBW) 140W Spurious Emissions - 3GPP TS25.141 Air interface compliant. -13 dBm (Max.) 1 MHz Bandwidth; -50 dBc (Max.) 63 dB +/-0.5 dB +/-0.5 dB 14 16 +26 to +28 Vdc Nominal (+21 to +30 Operational) 34.5A (Nominal, at 27V, 140W output) Input over drive, VSWR, DC failure, High temperature, Loop failure

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Connectors DC Terminal Post Connectors RF Input Connectors RF Output Connectors Alarm Output 355 x 99 x 500 (incl handles) (13.96 H X 3.9 W X 19.7 D) 28.5 21W4 Combo-D w/size 8 contact 21W4 Combo-D w/PkZ contact 21W4 Combo-D w/PkZ contact 21W4 Combo-D

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range Storage Temperature Range Operating Humidity Storage Humidity -20 C to +50 C -40 to +85 C 5% to 90% (non condensing) 5% to 90% (non condensing)

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-12-05

11

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Base Station Products

POWERWAVE

Single MCPA Outdoor Booster Systems

Power Amplifier Solutions


Single MCPA Outdoor Booster Systems

Title OS-1 Outdoor System

Range (MHz) 800

Air Interface GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA

Part Number OS-0851-P0-XXX

Page 13

OS-1 Outdoor System

900

OS-0951-P0-XXX

14

OS-1 Outdoor System

1800

OS-1851-H0-XXX

15

OS-1 Outdoor System

1900

OS-1951-E0-XXX

16

OS-1 Outdoor System

2100

OS-2151-E0-XXX

17

12

POWERWAVE

Outdoor Booster Systems

OS-0851-P0-XXX

OS-1 Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth (MHz) Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) Misc. GSM/EDGE/CDMA/WCDMA 869-894 824-849 120** -65* dBc 25 0 to +20 2.5* (-000 version) 180-264 VAC or +27VDC 2.5 @ max gain, 3.0 @ min gain* (-003 version) 0 to +13.0 variable (-003 version) +12 min (-003 Version) 100 min 7.0 (+/- 2 dB) (-003 version) 15 min 50

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 228 X 660 X 660 (9x 22 x 22) 102 7/16 DIN female X 6 1 1

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range Ingress Protection Class Lightning Protection -20 C to +50 C IP54 20kA EIC 61000-4-5, 8/20us waveform

ORDERING INFORMATION
Model Number 930-00018-009 (optional) MCPA Modules: G3L-850-160 160W MCPA Module 1 Description 3 KW Rectifier Quantity 1

Choose one of the following Enclosures: OS-0851-P0-000 OS-0851-P0-003

Enclosure -TMA model Enclosure - LNA model with VSWR monitor

1 1

* Typical Performance. ** Typical, with G3L-850-160 MCPA Module Inserted.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-08-26

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

13

POWERWAVE

Outdoor Booster Systems

OS-0951-P0-XXX

OS-1 Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth (MHz) Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) Misc. GSM/EDGE 925-960 880-915 100 Watts** Spurious Emissions - 3GPP TS45.005 & TS25.141 Air Interface Compliant 35 0 to +20.0 variable 2 dB* (-100 model) 94-264 VAC (Single Phase) or +27VDC 2.5* @ max. gain, 3.5* @ min. gain (-103 version) 0 to +14.0 variable (-100 model) > 0 dBm 100 min. 0-10 dB output RL 14 min. 50 Optional modem for remote monitoring. Local configurability and alarm status through USB or Ethernet interface. Remote access through DHCP client via rear Ethernet port.

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 620 X 284 X 716 (24.4x 11.18 x 28.18) 50 Kg (110 lbs) 7/16 DIN Female X 4 1 1

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range Ingress Protection Class Lightning Protection -30 to +50 IP54 40kA per line, 8/20 us waveform

ORDERING INFORMATION
Model Number Choose one enclosure: OS-0951-P0-104 OS-0951-P0-103 Amplifier Module: G3L-929-135 135W MCPA Module 1 1 sector, with LNA, includes rectifier and modem 1 sector, with LNA, includes rectifier 1 1 Description Quantity

* Typical Performance. ** Typical, with G3L-929-135 MCPA Module Inserted.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-07-20

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

14

POWERWAVE

Outdoor Booster Systems

OS-1851-H0-XXX

OS-1 Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth (MHz) Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) Misc. 15 min. 50 GSM/EDGE/CDMA/WCDMA 1805-1880 1710-1785 90** Watts -65* dBc 45 0 to +14 2dB* (-000 version) 94-264 VAC (Single Phase, 47-63Hz) or +27VDC 2.3* @ max. Gain, 1.89* @ min. Gain 0 to +13.0 variable (-003 version) +12 min. 100 min.

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 610 X 284 X 716 (24x 11 x 28) 102 7/16 DIN Female X 6 1 1

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range Ingress Protection Class Lightning Protection -20 C to +50 C IP54 20kA EIC 61000-4-5, 8/20 us waveform

ORDERING INFORMATION
Model Number G3L-1829-120 Description 120W MCPA module Quantity 1 1 Choose one of: OS-1851-H0-000 OS-1851-H0-003 Enclosure - TMA model - DC transparency Enclosure - LNA model - includes VSWR monitor, lightning arrestors 1 1

* Typical Performance. ** Typical, with G3L-1829-120 MCPA Module Inserted.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-06-10

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

15

POWERWAVE

Outdoor Booster Systems

OS-1951-E0-XXX

OS-1 Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth (MHz) Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) Misc. GSM, EDGE,CDMA,WCDMA 1930-1990 1850-1910 125** Watts -65 dBc 65 0 to +20 variable 2 dB (-100 series) 94-264 VAC (Single Phase, 47-63 Hz), or +27 VDC 2.5 dB max (all models except -100) 0 to +14 dB (all models except -100) > 0 dBm 100 dB min 0-10 dB output RL 14 dB min 50 Optional modem for remote monitoring. Local configurability and alarm status through USB or Ethernet interface. Remote access through DHCP client via rear Ethernet port.

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 620 X 284 X 716 (24.4x 11.18 x 28.18) 110 (50 Kg) 7/16 DIN Female X 6 1 1

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range Ingress Protection Class Lightning Protection -30 C to +50 C IP54 40 KA per line, 8/20 us WF

ORDERING INFORMATION
Model Number Enclosures (Select one): OS-1951-E0-102 MCPA Module G3L-1929-160 Alternatively, select a Kit: INST-OS-1951-103 Kit includes: G3L-1929-160 amplifier module OS-1951-E0-102 enclosure 1 1 160W 1900 MHz MCPA 1 1 sector, with LNA, includes rectifier 1 Description Quantity

* Typical Performance** Typical, with G3L-1929-160 inserted, 45 MHz IBWAll specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-07-20

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

16

POWERWAVE

Outdoor Booster Systems

OS-2151-E0-XXX

OS-1 Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth (MHz) Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) Misc. GSM,EDGE,CDMA,WCDMA 2110-2155 (AWS, -4XX series), 2110-2170 (UMTS, -1XX series) 1710-1755 (AWS, -4XX series), 1920-1980 (UMTS, -1XX series) 100W** Spurious Emissions - 3GPP TS25.141 Air interface compliant. 45 (AWS, -4XX series) 60 (UMTS,-1XX series) 0 to +20 variable 2 dB (-100,-400 models) 94-264 VAC (Single Phase, 47-63 Hz), or +27 VDC 2.5 dB max (-101,-401 models) 0 to +14 dB adjustable (-101,-401 models) >0 dBm 100dB min. 0-10 dB output RL (selectable) 14 dB min. 50 Optional modem for remote monitoring, local configurability and alarm status through USB or Ethernet interface. Remote access through DHCP client via Rear Ethernet port.

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 620 X 284 X 716 (24.4x 11.18 x 28.18) 110 (50 Kg) 7/16 DIN Female X 4 1 1

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range Ingress Protection Class Lightning Protection -30 C to +50 C IP54 40kA per line, 8/20 us WF

ORDERING INFORMATION
Model Number Enclosures (select one) LNA model - UMTS (Band Class 1) w/rectifier LNA model - UMTS (Band Class 1) w/rectifier and modem LNA model - AWS (Band Class 4) w/rectifier LNA model - AWS (Band Class 4) w/rectifier and modem 140W MCPA module Description Quantity

OS-2151-E0-101 OS-2151-E0-104 OS-2151-E0-401 OS-2151-E0-404 MCPA Module: G3L-2129-140

1 1 1 1

** Typical, with G3L-2129-140 MCPA Module InsertedAll specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-07-20

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

17

Base Station Products

POWERWAVE

Dual MCPA Outdoor Booster Systems

Power Amplifier Solutions


Dual MCPA Outdoor Booster Systems

Title OS-2 Outdoor System

Range (MHz) 900

Air Interface GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA

Part Number OS-0921-V0-XXX

Page 19

OS-2 Outdoor System

1800

OS-1821-H0-XXX

20

OS-2 Outdoor System

1900

OS-1921-H0-XXX

21

18

POWERWAVE

Outdoor Booster Systems

OS-0921-V0-XXX

OS-2 Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth (MHz) Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) Misc. EGSM/EDGE 925-960 880-915 180** Watts -65* dBc 25 1 MCPA Module 0 to 17.5, 2 MCPA Module 0 to 20.5 2dB*(-000 variant), 0.5dB*dB (bypass mode) 180-264 VAC, 47-63 Hz Single Phase, or +27VDC 2.5* @ max. Gain, 3.5* @ min. Gain (-001 and -003 variants) 0 to +11.0 variable (-001 and -003 variants) +12 min. 90 min. 9.5 (+/-2dB) (-003 variant) 14 min. 50

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 407 x 865 x 840 (14x 210x 29) 151-183 7/16 DIN Female X 4 1 or 2 1

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range Ingress Protection Class Lightning Protection -20 to +50 IP54 20kA EIC 61000-4-5, 8/20 us waveform

ORDERING INFORMATION
Model Number G3L-929-135 1001308 Choose one of the following Enclosures: OS-0921-V0-010 OS-0921-V0-011 OS-0921-V0-013 Enclosure - TMA model - 12V supply to TMA Enclosure - LNA model Enclosure - LNA model with VSWR monitor 1 1 1 Description 135W MCPA module Rectifier Quantity 1-2 2-3

* Typical ** Typical, with two G3L-929-135 modules installed. All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-06-10

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

19

POWERWAVE

Outdoor Booster Systems

OS-1821-H0-XXX

OS-2 Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth (MHz) Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) Misc. GSM/EDGE 1805-1880 1710-1785 160** Watts -65* dBc 35 1 MCPA Module 0 to +12, 2 MCPA Module 0 to +15 2.5dB*, 0.5dB* (bypass) 180-264 VAC, 47-63 Hz Single Phase, or +27VDC 2.5* @ max. Gain, 3.5* @ min. Gain (-001 version) 0 to +12.0 variable (-001 version) +12dBm min. 100 min. N/A 14 min 50 N/A

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 407 x 865 x 840 (14x 210x 29) 151-183 7/16 DIN Female X 4 2 1

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range Ingress Protection Class Lightning Protection -20 C to +50 C IP54 20kA EIC 61000-4-5, 8/20 us waveform

ORDERING INFORMATION
Model Number G3L-1829-120 1001308 Choose one of the following Enclosures: OS-1821-H0-004 OS-1821-H0-005 Description 120W MCPA Module AC Rectifier Quantity 1-2 2-3

TMA Model - 12VDC supply to TMA LNA Model

1 1

* Typical ** Typical, with two G3L-1829-120 modules installed. All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-06-10

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

20

POWERWAVE

Outdoor Booster Systems

OS-1921-H0-XXX

OS-2 Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth (MHz) Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) Misc. GSM/EDGE/CDMA/WCDMA 1930-1990 1850-1910 160** Watts -65* dBc 45/60 1 MCPA Module 0 to +12, 2 MCPA Modules 0 to +15 2.5* 180-264 VAC, 47-63 Hz Single Phase, or +27VDC N/A N/A N/A 100 dB min N/A 14dB min. 50

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 407 x 863 x 838 (16x 34x 33) 151-183 7/16 DIN Female X 8 2 1

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range Ingress Protection Class Lightning Protection -20 C to +50 C IP54 20kA EIC 61000-4-5, 8/20 us waveform

ORDERING INFORMATION
Model Number 930-00018-009 OS-1921-H0-000 Compatible with MCPA Module: G3L-1929-120 Description 3 KW rectifier Enclosure - TMA model - DC transparency or TMA bias Function (configurable) Quantity 1-2 1

120W MCPA module

1-2

* Typical ** Typical, output power at antenna port with 2 G3L-1929-120 modules installed, 45 MHz IBW. All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-06-10

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

21

Base Station Products

POWERWAVE

Triple MCPA Outdoor Booster Systems

Power Amplifier Solutions


Triple MCPA Outdoor Booster Systems

Title OS-3 3 Sector Outdoor System

Range (MHz) 1900

Air Interface GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA GSM/EDGE/CDMA2000/ WCDMA

Part Number OS-1933-E0-XXX

Page 23

OS-3 Outdoor System

1900

OS-1991-H0-XXX

24

OS-3 3 Sector Outdoor System

2100

OS-2133-E0-XXX

25

22

POWERWAVE

Outdoor Booster Systems

OS-1933-E0-XXX

OS-3 3 Sector Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power - GSM/EDGE/WCDMA System Output Power - CDMA/CDMA 2000 IMD Specification Instantaneous Bandwidth (MHz) Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) Misc. GSM/EDGE/CDMA2000/WCDMA 1930-1995 1850-1915 150 W* 150 W** -65 dBc* 65 (with G3L-1929-160 module) 0-17 Variable 0.5dB* (RF Bypass Mode) 180-264 VAC, -48VDC (-103 model) 2.5 (Max @ 12dB Gain), 4.5 (Max @ 0 dB gain)* 0-12 dB 0.0 100 Adjustable 14 50

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 16 W x 40 H x 38 D 385 (175 kg) 7/16 DIN-F, N-F 1 3

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range Ingress Protection Class Lightning Protection -20 C to +50 C IP55 20kA EIC 61000-4-5, 8/20 uS Waveform

ORDERING INFORMATION
Model Number OS-1933-E0-003 Description OS-3, 1900 MHz, Trident 3 Sector, 3I/3O Includes: G3L-1929-160 modules RF Conditioning Units (RFCU) 220VAC Rectifiers OS-1933-E0-103 -48VDC version of OS-1933-E0-003 Includes four -48VDC rectifiers instead of 220VAC rectifiers OS-3, 1900 MHz, Trident 1 Sector, 3I/3O Includes: G3L-1929-160 module RF Conditioning Unit (RFCU) 220VAC Rectifiers INST-1933-E0-001 1 Sector Upgrade Kit Includes: G3L-1929-160 module RF Conditioning Unit (RFCU) 220VAC Rectifier 1 1 1 Quantity 1 3 3 4

OS-1933-E0-001

1 1 1 2

* Typical Performance** Typical Performance with G3L-1929-160-001 MCPA Module Inserted, specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-12-05

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

23

POWERWAVE

Outdoor Booster Systems

OS-1991-H0-XXX

OS-3 Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power IMD Specification Instantaneous Bandwidth (MHz) Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) Misc. GSM/EDGE/CDMA2000/WCDMA 1930-1995 1850-1915 335** Watts -65* dBc 45/65 duplex/simplex: 3 MCPAs: 0.0 to +16.2/17.0, 2 MCPAs: 0 to 14.4/15.2, 1 MCPA: 0 to +11.4/12.2 3.0 max (-003, -103, -200 versions) -36 to -60VDC (-103 version), 180-264VAC (-003,-004 versions),+26-28VDC (-200 version) 2.5 at max Rx gain (-004 version) 0-12 dB in 1 dB increments (-004 version only) 0.0 (-004 version only) 100 min N/A 14 min. 50 Remotely configurable via web GUI, accessible via Ethernet interface. TMA bias support through PDU functionality. DC bypass configurability on -004 version.

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 405 x 774 x 864 (14x 26x 210) 255 lbs, fully populated, with 3 MCPA modules 7/16 DIN Female 3 1

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range Ingress Protection Class Lightning Protection -20 C to +50 C IP55 20kA EIC 61000-4-5, 8/20 us waveform

ORDERING INFORMATION
Model Number Choose one of: G3L-1929-160 G3L-1929-120 Choose one of: OS-1991-H0-003 OS-1991-H0-004 OS-1991-H0-103 OS-1991-H0-200 220 VAC Enclosure - TMA model 220 VAC Enclosure - LNA with DC bypass option for TMA bias -48 VDC Enclosure - TMA model +27 VDC Enclosure - TMA model 1 1 1 1 160W MCPA module 120W MCPA module 1-3 1-3 Description Quantity

* Typical performance**Typical, with 3 G3L-1929-160 modules, 45 MHz IBW.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-12-05

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

24

POWERWAVE

Outdoor Booster Systems

OS-2133-E0-XXX

OS-3 3 Sector Outdoor System (Preliminary)

ELECTRICAL SPECIFICATIONS
Air Interface Frequency (MHz) Down Link Frequency (MHz) Up Link System Output Power - GSM/EDGE/WCDMA System Output Power - CDMA/CDMA 2000 IMD Specification Instantaneous Bandwidth (MHz) Tx Gain Range (dB) Rx Path Insertion Loss Supply Voltage Noise Figure (dB) Rx Gain Range Input Intercept Point IIP3 (dBm) Tx Rejection In Rx Band (dB) VSWR Alarm Threshold (dB) Return Loss, All Ports (dB) Impedance All Ports (Ohms) Misc. GSM/EDGE/CDMA2000/WCDMA 2110-2170 (UMTS, -X1X series), 2110-2155 (AWS, -X4X series) 1920-1980 (UMTS, -X1X series), 1710-1755 (AWS, -X4X series) 105W** 105W** -65 dBc* 60 (UMTS, -X1X series) 45 (AWS, -X4X series) 0-17 Variable 0.5dB* (RF Bypass Mode) 180-264 VAC (-0XX series), -48VDC (-1XX series) 2.5 (Max @ 12dB Gain), 4.5 (Max @ 0 dB gain) 0-12 dB 0.0 100 adjustable 14 50 Enclosure is multiband capable (any mix of 1900, 2100 MHz)

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) RF Connectors Number of MCPAs per Sector Number of Sectors 16 W x 40 H x 38 D 385 (175 kg) 7/16 DIN-F, N-F 1 3

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range Ingress Protection Class Lightning Protection -20 C to +50 C IP55 20kA EIC 61000-4-5, 8/20

ORDERING INFORMATION
Model Number OS-2133-E0-013 OS-2133-E0-043 OS-2133-E0-113 OS-2133-E0-143 Description Enclosure: 3I3O, UMTS (Band 1),220 VAC Enclosure: 3I3O, AWS (Band 4),220 VAC Enclosure: 3I3O, UMTS (Band ),-48 VDC Enclosure: 3I3O, AWS (Band 4),-48VDC Models above include: G3L-2129-140 amplifier modules Frequency-specific RF Conditioning Units 220 VAC Rectifiers (AC enclosures only) OS-2133-E0-041 Enclosure: 3I3O, AWS (Band 4), 220 VAC Incl: G3L-2129-140 amplifier module AWS RF Conditioning Unit 220VAC Rectifiers AWS Upgrade Kit, includes: G3L-2129-140 amplifier module AWS RF Conditioning Unit 220 VAC Rectifier 3 3 4 1 1 1 2 1 1 1 Quantity 1 1 1 1

INST-2133-E0-041

* Typical Performance** Typical, with G3L-2130-140 MCPA Module Inserted, 45 MHz IBW

Updated: 2010-12-05

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

25

TMA Products

Power wave

Tower Mounted Amplifiers


Powerwave offers one of the most extensive tower mounted amplifier (TMA) product portfolios, including single, twin and dual band TMAs. Our TMA design offers a low noise amplifier design that provides superior receive system performance and reliability. Powerwave TMAs are designed for the harshest environments to include desert and polar climates and extreme environments such as rain forests. Powerwave TMAs are also part of the Powerwave Clean Site Solutions which provides multiple benefits such as reduced installation cost, reuse of existing building permits and reduced visual impact to base stations.

Tower Mounted Amplifiers Power Distribution Units Current Injectors

Base Station Products

POWERWAVE

Tower Mounted Amplifiers

TMA Products
Tower Mounted Amplifiers

TMA Type
TMA Twin 800 AISG TMA-DD Twin 2100 15 MHz TMA-DD Twin 2100 15 MHz TMA-DD Twin 2100 15 MHz TMA-DD Twin 2100 15 MHz TMA Twin 900 AISG TMA Twin 900 AISG TMA Twin 900 AISG TMA Single 900 AISG TMA Single 900 AISG TMA Single 900 AISG TMA-DD EGSM TMA-DD 850 MHz SMR Rejection TMA-DD 1900

Up-Link (MHz)
824-849 1969.7-1984.7 1920.5-1935.5 1964.9-1979.9 1950-1965 890-915 880-908 890-915 890-915 890-915 890-915 880-915

Down-Link (MHz)
869-894 2110-2170 2110-2170 2110-2170 2110-2170 935-960 925-953 935-960 935-960 935-960 935-960 925-960

Part Number
24501, 24511 010-11177-0214 010-11182-02nn 010-11183-02nn 010-50025-0232 25001, 25011 25002, 25012 25014, 25016 25101, 25111 25102, 25112 25103, 25113 LGP192nn

Page
29 30 31 32 33 34 35 36 37 38 39 40

824-849

869-894

LGP174nn

41

1850-1910

1930-1990 1805-1880 1805-1880 1930-1990

LGP175nn LGP18520, LGP18521 LGP185nn LGP186nn

42 43 44 45

TMA-DD 1800 Twin AISG 2.0 1710-1785 TMA-DD 1800 Twin AISG 2.0 1710-1785 TMA-DD 1900 Twin 1850-1910

27

Base Station Products

POWERWAVE

Tower Mounted Amplifiers

TMA Products
Tower Mounted Amplifiers

TMA Type TMA-DD Micro Twin 2100 TMA Dual Band AWS with 700 Bypass

Up-Link (MHz) 1920-1980 1710-1770 with 698-746 bypass

Down-Link (MHz) 2110-2170 2110-2170 with 698746 bypass 2110-2170 with 698746 bypass 2110-2155 2110-2170 728-746 and 21102170 869-894 /1930-1990 1930-1990 with 824894 bypass 935-960

Part Number LGP215nn TSAW-07BP111-001 TTAW-07BP111-001 TTAW-0000112-001 TTAW-60BW111-001 TS07-AWDB111-001 TT08-19DB111-001 TT19-08BP111-001 TU09-000001n-001

Page 46 47 48 49 50 51 52 53 54

TMA Twin Dual Band 1710-1770 with 698-746 AWS with 700 Bypass bypass TMA Micro Twin AWS 1710-1755 TMA Micro Twin AWS 1710-1770 TMA Dual Band 700/AWS TMA Twin 850/1900 Dual Band TMA Twin 1900 with 850 Bypass ACTIVE UGC 900 698-716 MHz and 17101770 MHz 824-849 /1850-1910 1850-1910 with 824-894 bypass 890-915

28

POWERWAVE

Tower Mounted Amplifiers

24501, 24511

TMA Twin 800 12 dB SL AISG

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 824-849 >82 dB 12 >18 dB 1.4 dB, Typical +25, Typical 2.0 dB, Typical +10 dBm 869-894 >18 dB 0.4, Typical <-118 dBm (@ 2x43 dBm Tx carriers) AISG Mode: 10-30; Current alarm mode: 8.5 -17 AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current

Power Consumption Power Handling, RMS AISG Compatibility

@12 VDC, 1.5W per LNA >53.5 dBm 24501 AISG 1.1 (Field upgradable to AISG 2.0); 24511 AISG 2.0

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 228x169x120 (9x6.7x4.8) <6 kg (13.2 lbs) Off white (NCS 1502-R) DIN 7/16 Female Mounting kit for pole and wall included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield) Aluminum >1 million hours per TMA IP68

APPROVAL AND TESTS


Safety EMC EN60950, UL 1950, ETL ETS 300 342-3

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev A

Updated: 2010-02-04

29

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

010-11177-0214

Tower Mounted Amplifier

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 1969.7-1984.7 3 dBc Bandwidth = 30MHz; 10 dBc Bandwidth = 40MHz; 50 dBc Bandwidth = 55MHz 12 > 18 dB Typical 1.2 dB, Max 1.7 dB > +23 <1.8 Typical. 3.7 Max +10 2110-2170 > 18 dB Max 0.4 <-128 dBm in Rx Band (2 Tx Carriers at +43 dBm) AISG mode: 10 - 30; CWA mode: 8.5 - 15 Alarm Current: 250 mA

Power Consumption Power Handling, RMS AISG Compatibility

Typical 1.3W per TMA (2.5 W Total) 52 dBm CW; 62 dBm peak 2.0

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 340x171x70 mm (13.4x6.7x2.8 inch) <4.5 Kg (9.9) Off white (NCS 1502-R) 7/16 Female Hose Clamps Included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >350.000 Hours IP 68

APPROVAL AND TESTS


Safety EMC EN 60950 ETS 125 113

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2009-05-05

30

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

010-11182-02nn

Tower Mounted Amplifier

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 1920.5-1935.5 3 dBc Bandwidth = 30MHz; 10 dBc Bandwidth = 40MHz; 50 dBc Bandwidth = 55MHz 12 > 18 dB Typical 1.2 dB, Max 1.7 dB > +23 <1.8 Typical. 3.7 Max +10 2110-2170 > 18 dB Max 0.4 <-128 dBm in Rx Band (2 Tx Carriers at +43 dBm) AISG mode: 10 - 30; CWA mode: 8.5 - 15 Alarm Current -0202: 250 mA

Power Consumption Power Handling, RMS AISG Compatibility

Typical 1.3W per TMA (2.5 W Total) 52 dBm CW; 62 dBm peak 2.0

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 340x171x70 mm (13.4x6.7x2.8 inch) <4.5 Kg (9.9) Off white (NCS 1502-R) 7/16 Female Hose Clamps Included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-11 3 kA 10/350 s; 20 kA (Shield) Aluminum >350.000 Hours IP68

APPROVAL AND TESTS


Safety EMC EN 60950 ETS 125 113

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2009-05-05

31

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

010-11183-02nn

Tower Mounted Amplifier

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 1964.9-1979.9 3 dBc Bandwidth = 30MHz; 10 dBc Bandwidth = 40MHz; 50 dBc Bandwidth = 55MHz 12 > 18 dB Typical 1.2 dB, Max 1.7 dB > +23 <1.8 Typical. 3.7 Max +10 2110-2170 > 18 dB Max 0.4 <-128 dBm in Rx Band (2 Tx Carriers at +43 dBm) AISG mode: 10 - 30; CWA mode: 8.5 - 15 Alarm Current -0202: 250 mA; -0232: 180 mA

Power Consumption Power Handling, RMS AISG Compatibility

Typical 1.3W per TMA (2.5 W Total) 52 dBm CW; 62 dBm peak 2.0

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 340x171x70 mm (13.4x6.7x2.8 inch) <4.5 Kg (9.9) Off white (NCS 1502-R) 7/16 Female Hose Clamps Included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >350.000 Hours IP68

APPROVAL AND TESTS


Safety EMC EN 60950 ETS 125 113

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2009-09-21

32

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

010-50025-0232

Tower Mounted Amplifier

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 1950-1965 3 dBc Bandwidth = 30MHz; 10 dBc Bandwidth = 40MHz; 50 dBc Bandwidth = 55MHz 12 > 18 dB Typical 1.2 dB, Max 1.7 dB > +23 <1.8 Typical. 3.7 Max +10 2110-2170 > 18 dB Max 0.4 <-128 dBm in Rx Band (2 Tx Carriers at +43 dBm AISG mode: 10 - 30; CWA mode: 8.5 - 15 Alarm Current: 180 mA

Power Consumption Power Handling, RMS AISG Compatibility

Typical 1.3W per TMA (2.5 W Total) 52 dBm CW; 62 dBm peak 2.0

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 340x171x70 mm (13.4x6.7x2.8 inch) <4.5 Kg (9.9) Off white (NCS 1502-R) 7/16 Female Hose Clamps Included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >350.000 Hours IP 68

APPROVAL AND TESTS


Safety EMC EN 60950 ETS 125 113

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2009-09-21

33

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

25001, 25011

TMA Twin 900 12 dB SL AISG

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 890-915 >82 dB 12 >18 dB 1.4 dB, Typical +25, Typical 2.0 dB, Typical +10 dBm 935-960 >18 dB 0.4, Typical <-118 dBm (@ 2x43 dBm Tx carriers) AISG Mode: 10-30; Current alarm mode: 8.5 -17 AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current

Power Consumption Power Handling, RMS AISG Compatibility

@12 VDC, 1.5W per LNA >53.5 dBm 25001 AISG1.1 (Field upgradable to AISG 2.0); 25011 AISG 2.0

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 228x169x120 (9x6.7x4.8) <6 kg (13.2 lbs) Off white (NCS 1502-R) DIN 7/16 Female Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-11 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield) Aluminum >1 million hours per TMA IP68

APPROVAL AND TESTS


Safety EMC EN60950, UL1950, ETL ETS 300 342-3

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev A

Updated: 2009-12-29

34

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

25002, 25012

TMA Twin 900 EGSM 28 MHz 12 dB SL AISG

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 880-908 >82 dB 12 >18 dB 1.4 dB, Typical +25, Typical 2.0, Typical +10 dBm 925-953 >18 dB 0.4, Typical <-118 dBm (@ 2x43 dBm Tx carriers) AISG Mode: 10-30; Current alarm mode: 8.5 -17 AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current

Power Consumption Power Handling, RMS AISG Compatibility

@ 12 VDC, 1.5W per LNA >53.5 dBm 25002 AISG 1.1 (Field upgradable to AISG 2.0); 25012 AISG 2.0

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 228x169x120 (9x6.7x4.8) <6 kg (13.2 lbs) Off white (NCS 1502-R) DIN 7/16 Female Mounting kit for pole and wall included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours per TMA IP68

APPROVAL AND TESTS


Safety EMC EN60950, UL 1950, ETL ETS 300 342-3

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev A

Updated: 2009-12-29

35

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

25014, 25016

TMA Twin 900 16 dB AISG

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 890-915 >82 dB 16 >18 dB 1.4 dB, Typical +25, Typical 2.0 dB, Typical +10 dBm 935-960 >18 dB 0.4, Typical <-118 dBm (@ 2x43 dBm Tx carriers) AISG Mode: 10-30; Current alarm mode: 8.5 -17 AISG compatible or in case of no AISG command received, current alarm mode: LGP25014 170-190 mA; LGP25016 high CWA alarm current

Power Consumption Power Handling, RMS AISG Compatibility

@12 VDC, 1.5W per LNA >53.5 dBm AISG 2.0

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 228x169x120 (9x6.7x4.8) <6 kg (13.2 lbs) Off white (NCS 1502-R) DIN 7/16 Female Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield) Aluminum >1 million hours per TMA IP68

APPROVAL AND TESTS


Safety EMC EN60950, UL1950, ETL ETS 300 342-3

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev A

Updated: 2009-12-29

36

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

25101, 25111

TMA Single 900 12 dB SL AISG

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 890-915 >82 dB 12 >18 dB 1.4 dB, Typical +25, Typical 2.0 dB, Typical +10 dBm 935-960 >18 dB 0.4, Typical <-118 dBm (@ 2x43 dBm Tx carriers) AISG Mode: 10-30; Current alarm mode: 8.5 -17 AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current

Power Consumption Power Handling, RMS AISG Compatibility

@12 VDC, 1.5W per LNA >53.5 dBm 25101 AISG1.1 (Field upgradable to AISG 2.0); 25111 AISG 2.0

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 228x169x69 (9x6.7x2.7) <3 kg (<6.7 lbs) Off white (NCS 1502-R) DIN 7/16 Female Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-11 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield) Aluminum >1 million hours per TMA IP68

APPROVAL AND TESTS


Safety EMC EN60950, UL1950, ETL ETS 300 342-3

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev A

Updated: 2010-02-19

37

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

25102, 25112

TMA Single 900 EGSM 28 MHz 12 dB SL AISG

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 880-908 >82 dB 12 >18 dB 1.4 dB, Typical +25, Typical 2.0, Typical +10 dBm 925-953 >18 dB 0.4, Typical <-118 dBm (@ 2x43 dBm Tx carriers) AISG Mode: 10-30; Current alarm mode: 8.5 -17 AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current

Power Consumption Power Handling, RMS AISG Compatibility

@ 12 VDC, 1.5W per LNA >53.5 dBm 25102 AISG 1.1 (Field upgradable to AISG 2.0); 25112 AISG 2.0

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 228x169x69 (9x6.7x2.7) <3 kg (<6.7 lbs) Off white (NCS 1502-R) DIN 7/16 Female Mounting kit for pole and wall included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours per TMA IP68

APPROVAL AND TESTS


Safety EMC EN60950, UL 1950, ETL ETS 300 342-3

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev A

Updated: 2010-02-19

38

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

25103, 25113

TMA Single 900 12 dB AISG

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 890-915 >82 dB 12 >18 dB 1.4 dB, Typical +25, Typical 2.0 dB, Typical +10 dBm 935-960 >18 dB 0.4, Typical <-118 dBm (@ 2x43 dBm Tx carriers) AISG Mode: 10-30; Current alarm mode: 8.5 -17 AISG compatible or in case of no AISG command received, current alarm mode with high CWA (Current Window Alarm)

Power Consumption Power Handling, RMS AISG Compatibility

@12 VDC, 1.5W per LNA >53.5 dBm 25103 AISG1.1 (Field upgradable to AISG 2.0); 25113 AISG 2.0

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 228x169x69 (9x6.7x2.7) <3 kg (<6.7 lbs) Off white (NCS 1502-R) DIN 7/16 Female Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40C to +65C (-40F to +149F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-11 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield) Aluminum >1 million hours per TMA IP68

APPROVAL AND TESTS


Safety EMC EN60950, UL1950, ETL ETS 300 342-3

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev A

Updated: 2010-02-19

39

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

LGP192nn

Dual Duplex EGSM 900 MHz Full Band

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 880-915 >83 dB 12 >20 dB, Typical < 1.7 dB, Typical > +23 2.0, Typical +10 925-960 > 20 dB, Typical <0.7 dB, Typical @ 2 x 43 dBm Tx carrier (dBc), <-115 (<-158) 8-17 LGP19203 alarm current 170-190 mA; LGP19201 current alarm compatible with PDU LGP121nn

Power Consumption Power Handling, RMS AISG Compatibility

@12 VDC, 1.5 W >52 dBm N/A

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 169 x 272 x 89 (7x11x4) <5.7 kg (12.3 lbs) Off white (NCS 1502-R) DIN 7/16 female Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40 C to +65 C (-40 F to +149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-11 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours IP65

APPROVAL AND TESTS


Safety EMC EN 60 950 ETS 300 342-3

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08405 Rev B

Updated: 2010-01-05

40

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

LGP174nn

TMA DD 850 MHz with SMR Rejection

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 824-849 SMR Rejection, >30 dB @ 851 MHz 12 >21 dB, Typical < 1.7 dB, Typical > +23, Typical <2.2 +14 869-894 > 21 dB, Typical < 0.45 dB, Typical @ 2 x 43 dBm Tx carrier dBm (dBc), <-118 (<-161) 8-17 Two levels, individually supervised LNAs

Power Consumption Power Handling, RMS AISG Compatibility

@12 VDC, 1.2 W >57 dBm N/A

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 181 x 365 x 66 (7x12x4) <7.9 kg (17.4 lbs) Off white (NCS 1502-R) DIN 7/16 female Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40 C to +65 C (-40 F to +149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-11 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours IP65

APPROVAL AND TESTS


Safety EMC UL60 950 FCC Part 15

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08411 Rev. A with added Bypass Loss Aug 24 2010 Updated: 2010-08-24

41

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

LGP175nn

TMA DD 1900 MHz with 10 dB Rejection at 1912 MHz

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 1850-1910 @1912 MHz, >10 dB 12 >20 dB < 1.6 dB > +23 <2.6 dB +14 1930-1990 > 20 dB < 0.5 dB 2 Tx@43 dBm (dBc), <-158 8-17 Two levels, individually supervised LNAs

Power Consumption Power Handling, RMS AISG Compatibility

@12 VDC, 1.2 W >54 dBm N/A

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 181 x 365 x 66 (7x12x4) 6.4 kg (14.1 lbs) Off white (NCS 1502-R) DIN 7/16 female Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40 C to +65 C (-40 F to +149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-11 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours IP65

APPROVAL AND TESTS


Safety EMC UL60 950 FCC Part 15

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

PNLGP175nn

Updated: 2010-01-05

42

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

LGP18520, LGP18521

Twin Dual Duplex 1800 MHz Full Band

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 1710-1785 >80 dB 12 >18 dB 1.5 dB, Typical +26 dBm, Typical < 3.0 dB, Typical +12 1805-1880 > 18 dB 0.4 dB, Typical @ 2 x 43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port AISG Mode: 10-30; Current alarm mode: 9 -17 AISG compatible or in case of no AISG command received current alarm mode. Current alarm: LGP18520: Low CWA, LGP18521: High CWA

Power Consumption Power Handling, RMS AISG Compatibility

@12 VDC, 1.5 W per LNA >53 dBm AISG 2.0

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 169 x 272.5 x 67.7 (7x11x3) <4.5kg (9.9 lbs) Off white (NCS 1502-R) DIN 7/16 female Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40 C to +65 C (-40 F to +149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-11 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours IP 68

APPROVAL AND TESTS


Safety EMC EN 60 950 ETS 301 489

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-11-01

43

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

LGP185nn

Twin Dual Duplex 1800 MHz Full Band

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 1710-1785 >80 dB 12 >18 dB 1.5 dB, Typical +26 dBm, Typical < 3.0 dB, Typical +12 1805-1880 > 18 dB 0.4 dB, Typical @ 2 x 43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port AISG Mode: 10-30; Current alarm mode: 9 -17 LGP18506: 170-190 mA alarm current; LGP18501: current alarm compatible with PDU LGP121nn; LGP18507, 10, 17, 20, 21 AISG compatible or in case of no AISG command received current alarm mode: LGP18510, 20: 170-190 mA; LGP18507, 17: current alarm compatible with PDU LGP121nn @12 VDC, 1.5 W per LNA >53 dBm LGP18501, 06 no AISG; LGP18507, 10 AISG 1.1 (field upgrdable to AISG 2.0), LGP18517, 20, 21 AISG 2.0

Power Consumption Power Handling, RMS AISG Compatibility

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 169 x 272.5 x 67.7 (7x11x3) <4.5kg (9.9 lbs) Off white (NCS 1502-R) DIN 7/16 female Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40 C to +65 C (-40 F to +149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-11 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours LGP18501, 06: IP 65; LGP18507, 10, 17, 20, 21 IP 68

APPROVAL AND TESTS


Safety EMC EN 60 950 ETS 301 489

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08219 Rev C

Updated: 2010-11-29

44

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

LGP186nn

Twin Dual Duplex 1900 MHz Full Band

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 1850-1910 >80 dB 12 >18 dB 1.5 dB, Typical +26 dBm, Typical < 3.0 dB, Typical +12 1930-1990 > 18 dB 0.4 dB, Typical @ 2 x +43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port (<-159 dBc) AISG Mode: 10-30; Current alarm mode: 9 -17 LGP18606: 170-190 mA alarm current; LGP18601: current alarm compatible with PDU LGP121nn; LGP18607, 10, 17, 20 AISG compatible or in case of no AISG command received current alarm mode: LGP18610, 20: 170-190 mA; LGP18607, 17: current alarm compatible with PDU LGP121nn @12 VDC, 1.5 W per LNA >53 dBm LGP18601, 06 no AISG; LGP18607, 10 AISG 1.1 (field upgrdable to AISG 2.0), LGP18617, 20 AISG 2.0

Power Consumption Power Handling, RMS AISG Compatibility

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 169 x 272.5 x 67.7 (7x11x3) <4.5kg (9.9 lbs) Off white (NCS 1502-R) DIN 7/16 female Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40 C to +65 C (-40 F to +149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-11 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours LGP18601, 06: IP 65; LGP18607, 10, 17, 20 IP 68

APPROVAL AND TESTS


Safety EMC UL60 950, ETL FCC Part 15

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08220 Rev B

Updated: 2010-01-05

45

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

LGP215nn

Micro Twin Tower Mounted Amplifier Dual Duplex 2100 MHz Full Band

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 1920-1980 >85 dB (2110-2170 MHz) 12 >18 dB 1.4 dB, Typical +25, Typical <2.0 dB, Typical +14 2110-2170 >20 dB 0.3 dB, Typical @ 2 x 43 dBm Tx carriers, In receive band, <-125 dBm, referred to Antenna port AISG Mode: 10-30; Current alarm mode: 9 -17 AISG Compatible. In case of no AISG command received current alarm mode. LGP21509, 19: 170-190 mA; LGP21508, 18: current alarm compatible with PDU LGP121nn

Power Consumption Power Handling, RMS AISG Compatibility

@12 VDC, 1.5 W per LNA >49 dBm (4x43 dBm) LGP21508, 09 AISG 1.1 (field upgradable to AISG 2.0); LGP21518, 19 AISG 2.0

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 154 x 192 x 50 (6x8x2) 2.5kg (5.5 lbs) Off white (NCS 1502-R) DIN 7/16 female Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40 C to +65 C (-40 F to +149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-11 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield) Aluminum >1 million hours IP65 and IP68

APPROVAL AND TESTS


Safety EMC EN 60 950 ETSI 125 113

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08222 Rev D

Updated: 2010-10-06

46

Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

POWERWAVE

Tower Mounted Amplifiers

TSAW-07BP111-001

TMA Dual Band AWS with 700 Bypass 13 dB AISG

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 1710-1770 with 698-746 bypass >80 dB TX rejection, >25 dB rejection at 1700 and 1800 MHz 13 >18 dB <1.6 dB >+23 (Input IP3 >+11) <1.9 +14 dBm 2110-2170 with 698-746 bypass >18 dB <0.4 <-155 dBc (2x43 dBm TX) 8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17) AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA

Power Consumption Power Handling, RMS AISG Compatibility

<1.5 W 700: 500 W; AWS 300W AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version) TSAW-07BP112-001 has AISG 2.0 loaded from factory

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 250x169x82 (9.9x6.7x3.1) <9 (<4 kg) Off white (NCS 1502-R) Female 7/16 DIN, long neck Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40 to +65C ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s Aluminium >1 million hours IP67 minimum

APPROVAL AND TESTS


Safety EMC UL 60950; UL 1950, TUV FCC part 15

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2009-12-29

47

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

TTAW-07BP111-001

TMA Twin Dual Band AWS with 700 Bypass 13 dB AISG

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 1710-1770 with 698-746 bypass >80 dB TX rejection, >25 dB rejection at 1700 and 1800 MHz 13 >18 dB <1.6 dB >+23 (Input IP3 >+11) <1.9 +14 dBm 2110-2170 with 698-746 bypass >18 dB <0.4 <-155 dBc (2x43 dBm TX) 8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17) AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA

Power Consumption Power Handling, RMS AISG Compatibility

<1.5 W 700: 500 W; AWS 300W AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version) TTAW-07BP112-001 has AISG 2.0 loaded from factory

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 250x169x139 (9.9x6.7x5.4) <18 (<8 kg) Off white (NCS 1502-R) Female 7/16 DIN, long neck Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40 to +65C ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s Aluminium >1 million hours IP67 minimum

APPROVAL AND TESTS


Safety EMC UL 60950; UL 1950, TUV FCC part 15

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2009-12-29

48

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

TTAW-0000112-001

TMA Micro Twin AWS 12 dB AISG 2.0

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 1710-1755 >82 dB 12 >20 <1.4 dB >+23 <2.0, Typical +14 2110-2155 >20 <0.3 @ 2 x +43 dBm Tx carriers in receive band, <-160 dBc, reffered to antenna port AISG Mode: 10-30; Current alarm mode: 9 -17 AISG compatible cor in case of no AISG command received current alarm mode 170-190 mA

Power Consumption Power Handling, RMS AISG Compatibility

<1.1 W per branch @ 12V >49 dBm (4x43 dBm) AISG 2.0

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 192x154x50 mm (7.6x5.9x2.0) <2.5kg (5.5 lbs) Off white (NCS 1502-R) DIN 7/16 female, long neck Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40 C to +65 C (-40 F to + 149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield) Aluminum >1 million hours IP65 and IP68

APPROVAL AND TESTS


Safety EMC EN60950 3GPP: TS 25.113

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev B

Updated: 2010-10-06

49

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

TTAW-60BW111-001

TMA Micro Twin AWS 60 MHz BW 12 dB AISG

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 1710-1770 >80 dB 12 >18 dB <1.8 >+22 (Input IP3 >+10) <2.6 +14 dBm 2110-2170 >18 dB <0.35 <-155 dBc (2x43 dBm TX) 8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17) AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA

Power Consumption Power Handling, RMS AISG Compatibility

<2 W 300 W AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version) TTAW60BW112-001 has AISG 2.0 loaded from factory

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 192x154x50 mm (7.6x5.9x2.0) <7 (<3 kg) Off white (NCS 1502-R) Female 7/16 DIN, long neck Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40 to +65C ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s Aluminium >1 million hours per TMA IP67 minimum

APPROVAL AND TESTS


Safety EMC UL 60950; UL 1950, TUV FCC part 15

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev A

Updated: 2010-10-06

50

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

TS07-AWDB111-001

TMA Dual Band 700/AWS 13 dB AISG

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 698-716 MHz (Bandpass = 15.5 MHz, Roll off beginns at 699.25 and 714.75 MHz) and 1710-1770 MHz TX rejection >80 dB; 700 TMA: >40 dB rejection at 697.8 and at 716.2 MHz; AWS TMA: >25 dB rejection at 1700 and 1800 MHz 13 >18 dB AWS: < 1.6 dB, 700: <2.0 dB >+22 (Input IP3 >+10) AWS: <2.0, 700: < 2.9 +14 dBm 728-746 and 2110-2170 >18 dB <0.4 <-155 dBc (2x43 dBm TX) 8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17) AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA

Power Consumption Power Handling, RMS AISG Compatibility

<1.5 W (per LNA) 700: 500 W; AWS 300W AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version) TS07-AWDB112-001 has AISG 2.0 loaded from factory

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 305x305x127 (12x12x5) <27.6 (<12.5 kg) Off white (NCS 1502-R) Female 7/16 DIN, long neck Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40 to +65C ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s Aluminium >1 million hours per TMA IP67 minimum

APPROVAL AND TESTS


Safety EMC UL 60950; UL 1950, TUV FCC part 15

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2009-12-29

51

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

TT08-19DB111-001

TMA Twin Dual Band 850/1900 12 dB AISG 1.1

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 824-849 / 1850-1910 SMR Rejection, >30 dB @ 851 MHz 12 >18 dB <1.7 dB, Typical +25, Typical 2.5, Typical +14 dBm 869-894 / 1930-1990 > 18 dB 850 MHz, 0.4; 1900 MHz, 0.5 @ 2 x +43 dBm Tx carriers, in receive band, <-160 dBc, referred to antenna port AISG Mode: 10-30; Current alarm mode: 8 -17 AISG compatibe or in case of no AISG command received current alarm mode 270-290 mA

Power Consumption Power Handling, RMS AISG Compatibility

< 1.8 W per branch @ 12V 850: >57 dBm; 1900: >55 dBm AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only dependent on loaded SW version) TT08-19DB112-001 has AISG 2.0 loaded from factory

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 360x169x137mm (14.2x6.7x5.4) <22 Off white (NCS 1502-R) DIN 7/16 female, long neck Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40 C to +65 C (-40 F to + 149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours (per TMA) IP65 and IP68

APPROVAL AND TESTS


Safety EMC EN 60950 3GPP: TS 25.113

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev B

Updated: 2010-02-04

52

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

TT19-08BP111-001

TMA Twin 1900 with 850 Bypass 12 dB AISG 1.1

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 1850-1910 with 824-894 bypass >77 dB 12 >18 <1.7 dB, Typical >+23 2.5, Typical +14 dBm 1930-1990 with 824-894 bypass >18 850 MHz, <0.3; 1900 MHz, <0.5 @ 2 x +43 dBm TX carriers, in receive band, <160 dBc, reffered to antenna port AISG Mode: 10-30; Current alarm mode: 8 -17 AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA

Power Consumption Power Handling, RMS AISG Compatibility

<1.1W @12V 850: >57 dBm; 1900: >55 dBm AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only dependent on loaded SW version) TT19-08BP112-001 has AISG 2.0 loaded from factory

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 250x169x137 mm (9.9x6.7x5.4) <16 Off white (NCS 1502-R) DIN 7/16 female, long neck Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection -40 C to +65 C (-40 F to +149 F) ETS 300 019-1-4 ETS 300 019-1-2 ETS 300 019-1-1 3 kA 10/350 s; 20 kA (Shield) Aluminum >1 million hours per TMA IP65 and IP68

APPROVAL AND TESTS


Safety EMC EN60950 3GPP: TS 25.113

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Rev B

Updated: 2010-02-04

53

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

TU09-000001n-001

ACTIVE UGC 900 12dB VAR GAIN SL AISG

ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz) UL Rejection UL Gain(dB) UL Return Loss UL Noise Figure UL Output 3rd Order Intercept Point(dBm) UL Bypass Loss(dB) UL Max Input Power (dBm) DL Frequency Range (MHz) DL Return Loss DL Insertion Loss (dB) Intermodulation Input Voltage (V) Alarm Functionality 935-960 >18 dB 0.4 <-118 dBm (@ 2x43 dBm Tx carriers) AISG Mode: 10-30; Current alarm mode: 8.5 -17 AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm current 890-915 >82 dB Variable 0-12 in 1 dB steps >18 dB 1.5dB, typical at 12 dB gain +25, typical <5.5 (Including 3 dB hybrid loss)

Power Consumption Power Handling, RMS AISG Compatibility

@12 VDC, 1.5W per LNA >53.5 dBm TU09-0000011-001 AISG 1.1 (Field upgradable to AISG 2.0); TU09-0000012-001 AISG 2.0

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) Colors RF Connectors Mounting Kit 230.5x171x160 (9.1x6.8x6.3) <7 kg (15.4 lbs) Off white (NCS 1502-R) DIN 7/16 Female Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Operational Transportation Storage Lightning Protection Housing MTBF Ingress Protection Aluminum >1 million hours per TMA IP68 -40C to +65C (-40F to +149F)

APPROVAL AND TESTS


Safety EMC EN60950, UL1950, ETL ETS 300 342-3

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: 2010-01-29

54

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Base Station Products

POWERWAVE

Power Distribution Units

TMA Products
Power Distribution Units

Title PDU Lite Indoor

Up-Link (MHz) N/A

Down-Link (MHz) N/A

Part Number LGP121nn

Page 56

PDU Lite Indoor (For Dual Band TMAs)

N/A

N/A

LGP18104

57

55

POWERWAVE

Power Distribution Units

LGP121nn

PDU Lite Indoor

ELECTRICAL DATA
Input Voltage Input Current(Max) Input Protection and Polarity Output Voltage Output Current(Max) Output Protection Sum Alarm Output Port 20 to 60 V DC, positive or negative 1A Automatic Polarity Agile 12 V DC +/- 1 V 375 mA/port Automatic short-circuit protection, auto recovery Relay Normally Open and Normally Closed

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) 3.9 x 0.8 x 2.4 in 120 g (0.3 lbs.)

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Humidity MTBF -33 C to +60 C (-27 F to +140 F) 5-95% RH non condensing >1 million hours

APPROVAL AND TESTS


EMC Environmental ETS 300 342-3 ETS 300 019

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08280 Rev A

Updated: 2010-01-05

56

POWERWAVE

Power Distribution Units

LGP18104

PDU Lite Indoor (For Dual Band TMAs)

ELECTRICAL DATA
Input Voltage Input Current(Max) Input Protection and Polarity Output Voltage Output Current(Max) Output Protection Sum Alarm Output Port 20-60 V DC, positive or negative 3x1 A Automatic Polarity Agile 12 V DC +/- 1 V 375 mA/port Automatic short-circuit protection, auto recovery Relay Normally Open and Normally Closed

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(lbs) 19 1HU (19 x 1.75) 700 (1.55)

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Humidity MTBF -33 to +60 (-27 to +140) 5-95% RH non condensing >1 000 000 hours (over 100 years)

APPROVAL AND TESTS


EMC Environmental ETS 300 342-3 ETS 300 019

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2009-09-21

57

Base Station Products

POWERWAVE

Current Injectors

TMA Products
Current Injectors

Frequency Range (MHz) 698-960 and 1710-2690

Return Loss (dB) >20

Insertion Loss (dB) <0.1

Part Number LGP213nn

Page 59

698-960 and 1710-2690

>20

<0.1

LGP233nn

60

806-960 or 1710-1990

>25

N/A

LGP138nn

61

58

POWERWAVE

Current Injectors

LGP213nn

Outdoor Current Injector

TECHNICAL SPECIFICATIONS
Frequency Range (MHz) Return Loss (dB) Insertion Loss (dB) DC Current (Max) Intermodulation 2x 43 dBm Tx Carriers dBm 698 - 960 and 1710 - 2690 (Frequency extended: LGP21301 from Rev L, LGP21302 from Rev K, Sep 1 2010) >20 < 0.1 1.5 A <-116 dBm (<-159 dBc)

MECHANICAL SPECIFICATIONS
Dimensions - Without Mounting Plate - mm(in) Weight kg(lbs) Color Housing RF Connectors DC Supply Connector 87 x 41 x 51 (3.4 x 1.6 x 2.0) 0.32 (0.71) Off-white, NCS 1502R Aluminum DIN 7/16 female and male LGP21301 ANT female, BTS male LGP21302 ANT male, BTS female SMA female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit) MTBF Safety Ingress Protection Environmental Lightning Protection -40 to +65 (-40 to +149) >1 000 000 hours EN 609 50, UL 60950, ETL IP 68 - EN 60 529 ETS 300 019 IEC 61312-1

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08406 Rev. B

Updated: 2010-09-02

Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

59

POWERWAVE

Current Injectors

LGP233nn

Indoor Current Injector

TECHNICAL SPECIFICATIONS
Frequency Range (MHz) Return Loss (dB) Insertion Loss (dB) DC Current (Max) Intermodulation 2x 43 dBm Tx Carriers dBm 698 - 960 and 1710 - 2690 (Frequency extended: LGP23301 and LGP23302 from Rev M, Sep 1 2010) >20 <0.1 1.5 A <-116 dBm (<-159 dBc)

MECHANICAL SPECIFICATIONS
Dimensions - Without Mounting Plate - mm(in) Weight kg(lbs) Color Housing RF Connectors DC Supply Connector 87 x 41 x 51 (3.4 x 1.6 x 2.0) 0.32 (0.71) Silver plating Zink Alloy DIN 7/16 female and male LGP23301 ANT female, BTS male LGP23302 ANT male, BTS female SMB male

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit) MTBF Safety Ingress Protection Environmental Lightning Protection -5 to +55 (23 to +131) >1 000 000 hours (over 100 years) EN 609 50, UL 609 50, ETL IP 54 - EN 605 29 ETS 300 019 IEC 61312-1

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08407 Rev. B

Updated: 2010-09-14

Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

60

POWERWAVE

Current Injectors

LGP138nn

Outdoor Current Injector

TECHNICAL SPECIFICATIONS
Frequency Range (MHz) Return Loss (dB) Insertion Loss (dB) DC Current, (Max) Intermodulation 2x 43 dBm Tx Carriers dBm 806 - 960MHz or 1710 - 1990 >25 < 0.1 1A <-110 dBm, (<-153)

MECHANICAL SPECIFICATIONS
Dimensions - Without Mounting Plate - mm(in) Weight kg(lbs) Color Housing RF Connectors DC Supply Connector 107 x 48 x 62 (4.2 x 1.9 x 2.4) 0.45 (<1) Off-white, NCS 1502R Aluminum DIN 7/16 or type N female and male Screw Terminal Block

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit) MTBF Safety Ingress Protection Environmental Lightning Protection -40 to +65 (-40 to +149) >1 000 000 hours EN 609 50, UL 60950, ETL IP 65 - EN 60 529 ETS 300 019 IEC 1312-1

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08276 Rev B

Updated: 2010-09-14

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

61

Filter Products

Power wave

Base station co-siting and new technology overlays are growing trends around the globe and Powerwave is leading the way with a range of same band, dual band and triple band solutions. There are many reasons for adopting co-siting filter solutions, including limited tower space, zoning regulations and public opinion against new site locations. In addition, as newer technology platforms such as UMTS or LTE are deployed, the need for straightforward, low loss, high performance overlay solutions are required to allow operators to maximize existing network CAPEX by reusing installed cable and antenna structures.

Same Band Combiners T1 Diplexer/Crossband Combiner Triplexer/Crossband Combiners Duplexers Interference Filters

Base Station Products

POWERWAVE

Filters

Base Station Products


Filters

Range (MHz) 824-894

Insertion Loss (dB) 4.2 dB maximum

Return Loss (db) 18 dB minimum

Part Number CM1000-AMPS-xxx

Page 64

880-960

4.5 dB maximum

18 dB minimum

CM1001-EGSMxxx CM1007-DBPXBCxxx

65

698-2170

700/800 Port: 0.15 dB max.

20 dB minimum

66

1710-2690

0.10 dB typ., 0.20 dB max.

20 dB minimum

CM1005-DBPXBC

67

1710-2690

0.10 dB typ., 0.30 dB max.

20 dB minimum

CM1006-TBPXBC

68

1710-2170

0.3 dB maximum (Rx) 0.6 dB maximum (Tx)

18 dB minimum

LGP145nn

69

1850-1990

0.6 dB maximum (Rx)

18 dB minimum

LGP146nn

70

880-2170

0.2 dB maximum -01: <1.5 dB (<3.5 dB 890-892 MHz) -02: <1.0 dB (<1.8 dB 890-892 MHz) -03: <1.5 dB (< 3.5 dB 896-898 MHz) <0.1 dB Typical

20 dB minimum

LGP141nn

71

890-960

>18 dB

LGP195nn

72

824-2170

20 dB minimum

LGP219nn

73

63

POWERWAVE

Filters

CM1000-AMPS-xxx

850 MHz Same Band Combiner, w/AISG and DC Transparency Type 1

TECHNICAL SPECIFICATIONS
Filter Type Range (MHz) Frequency Range (Full Band MHz) Insertion Loss (dB) Return Loss (dB) Average Power Handling (dBm) Peak Power (dBm) Intermodulation (IM) (dBc) (Products, Max) Isolation Between Ports Common Port AISG Mode AISG Control Signal Loss Voltage Drop with 15W Power Supply Voltage Handling Continuous Current Handling DC Load Uplink, 824-849 4.2 dB maximum 18 dB minimum N/A 850 MHz Same Band Combiner, w/AISG and DC Transparency Type 1 824-894 Downlink, 869-894 0.6 dB maximum 18 dB minimum

200 watts (+53.0) 1200 watts (+60.8) PEP maximum at 3000m, +65C and N/A 2:1 antenna mismatch -115 dBm (-158 dBc) maximum in Rx band, two/+43 dBm carriers in the Tx band Systems Isolation (GSM-UMTS), Downlink, 36 dB minimum, Uplink, 18 dB minimum TMA DC Voltage & Control - BTS2 Main to ANT2 & BTS2 DIV to ANT1 Per AISG 1.1, 2.0 1 dB maximum @ 2.176 MHz, 2 dB maximum @ 11 MHz 1 V maximum @ 10-30VDC 0-35VDC 5 A, 0-35VDC 100 mA, +/-20 mA at GSM BTS Ports

MECHANICAL SPECIFICATIONS
Dimensions mm(in) Weight kg(lbs) Color Housing RF Connectors Mounting Kit - Rack Mount Mounting Kit - Tower Mounting 437.8 x 228 x 61.4 (17.24x 8.98x 2.42) - Excluding Rack/Mast Brackets & Connectors 8.15 (18) Off White (NCS 1502-R) Aluminum, IP 67 DIN 7/16 female 19 Rack Mount Brackets (order P/N CM1000-AMPS-001) Hose Clamps in Stainless Steel (order P/N CM1000-AMPS-002)

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit) MTBF Surge Protection Safety Ingress Protection Environmental EMC -40 C to +65 C (-40 to +149) 1 Million Hours IEC 61312-1 EN 60950, UL 60950 IP67 ETS 300 019 3GPP: TS 25.113

The SAME BAND COMBINER products are intended to install either indoors in rack cabinets or on walls, or outdoors on towers or walls close to the Base Transceiver Stations. The main design criteria have been to optimize electrical performance and to make easy installation for different locations. There are two mounting bracket options available either for a cabinet or outdoor installation. The Same Band Combiners can be used for a variety of dual-technology combining on common antennas, such as TDMA + GSM, GSM + UMTS, GSM + LTE, UMTS + LTE or IS95 CDMA + 1X/3X EVDO. The product combines technology 1 and 2 to the same antenna lines. Technology 1 BTS TX carriers and RX main path are connected to the 1st antenna line and technology 2 BTS TX and RX main feeds are connected to 2nd antenna line. Technology 1 BTS RX diversity is connected from 2nd antenna line and technology 2 BTS RX diversity is fed from the 1st antenna line. In addition, the product provides AISG carrier signal (AC bandwidth to 11 MHz) and DC-power path from the diversity port BTS2 to the 1st antenna line and from main BTS2 port to the 2nd antenna line.

Block Diagram - Type 1 Same Band Combiner

Tower Mounting Brackets Option Shown

Typical Application - GSM & UMTS Combining

D031-08700B

Updated: 2010-03-23

64

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Filters

CM1001-EGSM-xxx

GSM900 Same Band Combiner, w/AISG and DC Transparency Type 1

TECHNICAL SPECIFICATIONS
Filter Type Range (MHz) Frequency Range (Full Band MHz) Insertion Loss (dB) Return Loss (dB) Average Power Handling (dBm) Peak Power (dBm) Intermodulation (IM) (dBc) (Products, Max) Isolation Between Ports Common Port AISG Mode AISG Control Signal Loss Voltage Drop with 15W Power Supply Voltage Handling Continuous Current Handling DC Load Uplink, 880-915 4.5 dB maximum 18 dB minimum N/A GSM900 Same Band Combiner, w/AISG and DC Transparency Type 1 880-960 Downlink, 925-960 0.6 dB maximum 18 dB minimum

200 watts (+53.0) 1200 watts (+60.8) PEP maximum at 3000m, +65C and N/A 2:1 antenna mismatch -115 dBm (-158 dBc) maximum in Rx band, two/+43 dBm carriers in the Tx band Systems Isolation (GSM-UMTS), Downlink, 36 dB minimum, Uplink, 18 dB minimum TMA DC Voltage & Control - BTS2 Main to ANT2 & BTS2 DIV to ANT1 Per AISG 1.1, 2.0 1 dB maximum @ 2.176 MHz, 2 dB maximum @ 11 MHz 1 V maximum @ 10-30VDC 0-35VDC 5 A, 0-35VDC 100 mA, +/-20 mA at GSM BTS Ports

MECHANICAL SPECIFICATIONS
Dimensions mm(in) Weight kg(lbs) Color Housing RF Connectors Mounting Kit - Rack Mount Mounting Kit - Tower Mounting 437.8 x 228 x 61.4 (17.24x 8.98x 2.42) - Excluding Rack/Mast Brackets & Connectors 8.15 (18) Off White (NCS 1502-R) Aluminum, IP 67 DIN 7/16 female 19 Rack Mount Brackets (order P/N CM1001-EGSM-001) Hose Clamps in Stainless Steel (order P/N CM1001-EGSM-002)

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit) MTBF Surge Protection Safety Ingress Protection Environmental EMC -40 C to +65 C (-40 to +149) 1 Million Hours IEC 61312-1 EN 60950, UL 60950 IP67 ETS 300 019 3GPP: TS 25.113

The SAME BAND COMBINER products are intended to install either indoors in rack cabinets or on walls, or outdoors on towers or walls close to the Base Transceiver Stations. The main design criteria have been to optimize electrical performance and to make easy installation for different locations. There are two mounting bracket options available either for a cabinet or outdoor installation. The Same Band Combiners can be used for a variety of dual-technology combining on common antennas, such as TDMA + GSM, GSM + UMTS, GSM + LTE, UMTS + LTE or IS95 CDMA + 1X/3X EVDO. The product combines technology 1 and 2 to the same antenna lines. Technology 1 BTS TX carriers and RX main path are connected to the 1st antenna line and technology 2 BTS TX and RX main feeds are connected to 2nd antenna line. Technology 1 BTS RX diversity is connected from 2nd antenna line and technology 2 BTS RX diversity is fed from the 1st antenna line. In addition, the product provides AISG carrier signal (AC bandwidth to 11 MHz) and DC-power path from the diversity port BTS2 to the 1st antenna line and from main BTS2 port to the 2nd antenna line.

Block Diagram - Type 1 Same Band Combiner

Tower Mounting Brackets Option Shown

Typical Application - GSM & UMTS Combining

D031-08701B

Updated: 2010-03-23

65

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Filters

CM1007-DBPXBC-xxx

Diplex Filter for 700/800 MHz and AWS/PCS with DC Auto Sense

TECHNICAL SPECIFICATIONS
Filter Type Range Frequency Range Frequency Range Insertion Loss Return Loss Rejection Isolation (Channel to Channel) Average Power Handling (dBm) Peak Power (dBm) Intermodulation (IM) (dBc) (Products, Max) Common+Port DC Bias/AISG Auto-Sense (-001 Option): Antenna Sniffer Port (-002 Option): AISG Port+Converter (-003 Option): DC/AISG Delete (-004 Option): DC/AISG to Low & High Channels (-005 Option): DC/AISG to Low Channel (-006 Option): DC/AISG to High Channel (-007 Option): 700/800 Port, 698-894 MHz 700/800 Port: 0.15 dB Max. 20 dB minimum 60 dB min. @ 1710-2170 MHz 60 dB minimum 500 watts (+57) max. 500 watts (+57) max. 5 kW (+67 dBm) PEP maximum at 3000m, +65C and 5 kW (+67 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch 2:1 antenna mismatch -115 dBm (-158) maximum in Rx band, two/+43 dBm carriers in the Tx band TMA supply voltage, fed via the RF cable, +32 V, 2 A Maximum DC/AISG Auto-Sense from low or high channels (see logic table below) Option -001 + Sniffer Port -43 to -30 dB (698-894 and 1710- 2170 MHz) Options -001 & -002 + AISG Connector (Internal Converter AISG 1.1/2.0 Compatible) All ports are DC and AISG isolated from each other (no Auto-Sense function) All ports are permanently connected for DC and AISG connectivity (no Auto-Sense function) Low frequency channel is permanently connected for DC and AISG connectivity (no Auto-Sense function) High frequency channel is permanently connected for DC and AISG connectivity (no Auto-Sense function) Diplex Filter for 700/800 MHz and AWS/PCS 698-2170 MHz 698-894 MHz/1710-2170 MHz AWS/PCS Port, 1710-2170 MHz AWS/PCS Port: 0.15 dB Max. 20 dB minimum 60 dB min. @ 698-894 MHz

MECHANICAL SPECIFICATIONS
Dimensions mm(in) Weight kg(lbs) Color Housing RF Connectors Sniffer Port Connector AISG Connector Mounting_Kit 125 x 227.5 x 83 (4.92 x 8.96 x 3.27), excluding connectors and bracket 3.0 (6.5 lbs) maximum Off White (NCS 1502-R) Aluminum DIN 7/16 female, long barrel N-F (IP67 rated protective cap included) Per IEC-60130-9 (IP67 rated protective cap included) Hose Clamps in Stainless Steel

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit) MTBF Lightning Protection Safety Ingress Protection Environmental EMC -40to +65(-40to +149) > 2 Million Hours IEC 61312-1, 3 kA 10/350 s, 8 kA 8/20 s EN 60 950, UL 1950, ETL IP67 (IP67 rated cap must be connected to any unused ports) ETS 300 019 ETS 300 342-3

Product Assumes that AISG will always be on the same connector as DC.

DC Auto Sense Logic Table


DC/AISG Feedthru CM1007-DBPXBC-001 CM1007-DBPXBC-002 CM1007-DBPXBC-003 CM1007-DBPXBC-004 CM1007-DBPXBC-005 CM1007-DBPXBC-006 CM1007-DBPXBC-007 Low Port (698-894 MHz) #2 Priority Connection #2 Priority Connection #3 Priority Connection No Connection Connection Connection No Connection High Port (1710-2170 MHz) #1 Priority Connection #1 Priority Connection #2 Priority Connection No Connection Connection No Connection Connection AISG Port N/A N/A #1 Priority Connection N/A N/A N/A N/A DC/AISG Connection DC AutoSense * DC AutoSense * DC AutoSense * Hard-Wired Hard-Wired Hard-Wired Hard-Wired Tower Top Capable Yes - Common to High Port Only Yes - Common to High Port Only No - BTS location only Yes Yes Yes Yes

* Product assumes that AISG signal will always be associated with DC presence

D031-08690B

Updated: 2010-07-12

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

66

POWERWAVE

Filters

CM1005-DBPXBC

Diplex Filter for 1700/1800/1900/2100 and 2300/2600 MHz

For Release in Spring 2011


TECHNICAL SPECIFICATIONS
Filter Type Range Frequency Range Frequency Range Insertion Loss Return Loss Rejection Isolation (Channel to Channel) Average Power Handling (dBm) Peak Power (dBm) Intermodulation (IM) (dBc) (Products, Max) Common+Port DC Bias/AISG Passthru (single): Low Port, 1710-2170 MHz 0.10 dB typ., 0.20 dB max. 20 dB minimum 50 dB min. @ 2300-2690 MHz 50 dB minimum 500 watts (+57) max. 500 watts (+57) max. 5 kW (+67 dBm) PEP maximum at 3000m, +65C and 5 kW (+67 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch 2:1 antenna mismatch -117 dBm (-160) maximum in Rx band, two/+43 dBm carriers in the Tx band TMA supply voltage, fed via the RF cable, +31 V, 3 A Maximum -01: No Connection (DC -02: DC/AISG to issue -03: DC/AISG to issue -04: DC/AISG to issue Grounded) 2.0 (connected all ports) 2.0 (High Port to 2.0 (Low Port to Antenna Antenna Port) Port) -005: No Connection -006: DC/AISG to issue -007: DC/AISG to issue -008: DC/AISG to issue (DC Grounded) 2.0 (connected all ports) 2.0 (High Port to 2.0 (Low Port to Antenna Antenna Port) Port) Diplex Filter for 1700/1800/1900/2100 and 2300/2600MHz 1710-2690 1710-2170 MHz/2300-2690 MHz High Port, 2300-2690 MHz 0.10 dB typ., 0.20 dB max. 20 dB minimum 50 dB min. @ 1710-2170 MHz

DC Bias/AISG Passthru (twin):

MECHANICAL SPECIFICATIONS
Dimensions mm(in) Weight kg(lbs) Color Housing RF Connectors Mounting_Kit 158 x 112 x 61 (6.22x 4.4x 2.4) excluding mounting brackets & connectors 2.3 (5.1) maximum Off White (NCS 1502-R) Aluminum DIN 7/16 female, long barrel Hose Clamps in Stainless Steel

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit) MTBF Lightning Protection Safety Ingress Protection Environmental EMC -40to +65(-40to +149) 3 Million Hours According to IEC 61312-1, 8 kA 8/20 uS;center pin (any port)-shield EN 60 950, UL 1950, ETL IP68 ETS 300 019 ETS 300 342-3

D031-08695B

Updated: 2010-11-30

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

67

POWERWAVE

Filters

CM1006-TBPXBC

Triplex Filter for DCS, UMTS & 2600 MHz For Release in Spring 2011

TECHNICAL SPECIFICATIONS
Range Frequency Range Insertion Loss Return Loss Average Power Handling (dBm) Peak Power (dBm) Low Port, 1710-1880 MHz 0.10 dB typical (0.30 dB max.) 20 dB minimum 300 watts (+55) min 1710-2690 MHz Mid Port, 1920-2170 MHz 0.10 dB typical (0.30 dB max.) 20 dB minimum 300 watts (+55) min High Port, 2300-2690 MHz 0.10 dB typical (0.20 dB max.) 20 dB minimum 200 watts (+53) min

Intermodulation (IM) (dBc) (Products, Max) Isolation Between Ports Common+Port DC Bias/AISG Passthru -001 (Single) / -006 (Twin) DC Bias/AISG Passthru -002 (Single) / -007 (Twin) DC Bias/AISG Passthru -003 (Single) / -008 (Twin) DC Bias/AISG Passthru -004 (Single) / -009 (Twin) DC Bias/AISG Passthru -005 (Single) / -010 (Twin)

3 kW (+65 dBm) PEP 3 kW (+65 dBm) PEP 2kW(+63) PEP max. at 3000m, +65C and 2:1 maximum at 3000m, maximum at 3000m, antenna mismatch +65C and 2:1 antenna +65C and 2:1 antenna mismatch mismatch -117 dBm (-160) maximum in Rx band, two/+43 dBm carriers in the Tx band 50 dB minimum TMA supply voltage, fed via the RF cable, +/-31 V maximum, 3 A No Connection (DC Grounded) DC/AISG to issue 2.0 (connected all ports) DC/AISG to issue 2.0 (connected high port to antenna port) DC/AISG to issue 2.0 (connected mid port to antenna port) DC/AISG to issue 2.0 (connected low port to antenna port)

MECHANICAL SPECIFICATIONS
Dimensions mm(in) Weight kg(lbs) Color Housing RF Connectors Mounting Kit 200 x 200 x 63.3 (7.9x 7.9x 2.5) excluding mounting brackets & connectors <3.0 (6.5) Off White (NCS 1502-R) Aluminum DIN 7/16 female, long barrel Hose Clamps in Stainless Steel

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit) MTBF Safety Ingress Protection Environmental -40 C to +65 C (-40 to +149) 2 Million Hours EN 60 950, UL 60 950, ETL IP68 ETS 300 019

D031-08696B

Updated: 2010-11-30

68

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Filters

LGP145nn

Diplex Filter for 1800/UMTS with Configurable DC Transparency

TECHNICAL SPECIFICATIONS
Filter Type Range (MHz) Frequency Range (Full Band MHz) Frequency Range (MHz) Insertion Loss (dB) Return Loss (dB) Rejection Average Power Handling (dBm) Peak Power (dBm) Intermodulation (IM) (dBc) (Products, Max) Common+Port DC Bias/AISG Passthru 1800 Port, 1710-1880 0.3 dB maximum (Rx), 0.6 dB maximum (Tx) 18 dB minimum 74 dB min. 1920-1980 MHz & 59 dB min. 2110-2170 MHz 240 watts (+53.8) minimum 1440 watts (+61) minimum Diplexer for 1800/2100 1710-2170 1710-1880 MHz/1920-2170 UMTS Port, 1920-2170 0.5 dB maximum (Rx), 0.3 dB maximum (Tx) 18 dB minimum 60 dB min. 1710-1880 MHz 80 watts (+49) minimum 1600 watts (+62) minimum

-118 dBm (-161) maximum in Rx band, two/+43 dBm carriers in the Tx band TMA supply voltage, fed via the RF cable, +/-58.5 V maximum, 2 A -01: DC/AISG to issue -02: DC/AISG to issue -03: DC/AISG to issue -04: No Connection (DC 2.0 (UMTS Port to 2.0 (1800 Port to 2.0 (connected all ports) Grounded) Antenna Port) Antenna Port)

MECHANICAL SPECIFICATIONS
Dimensions mm(in) Weight kg(lbs) Volume Color Housing RF Connectors Mounting Kit 180 x 162 x 61 (7x 6x 2) 3.6 (7.9) N/A Off White (NCS 1502-R) Aluminum DIN 7/16 female Hose Clamps in Stainless Steel

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit) MTBF Lightning Protection Safety Ingress Protection Environmental EMC -40to +65(-40to +149) 10 Million Hours 3 kA 10/350 us; center pin (any port) to shield and 50 kA 10/350 us; shieldshield (Pulse forms per IEC61312-1) EN60 950 IP65, EN 60 529 ETS 300 019 N/A

D031-08227A

Updated: 2010-03-18

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

69

POWERWAVE

Filters

LGP146nn

1900 MHz Duplex filter Outdoor with DC Bypass

TECHNICAL SPECIFICATIONS
Filter Type Range (MHz) Frequency Range (Full Band MHz) Frequency Range (MHz) Insertion Loss (dB) Return Loss (dB) Rejection Average Power Handling (dBm) Peak Power (dBm) Intermodulation (IM) (dBc) (Products, Max) Common+Port DC Bias/AISG Passthru RECEIVE,1850-1910 0.6 dB maximum (Rx) 18 dB minimum 40 dB minimum; 1930-1990 MHz N/A N/A Duplex Filter 1900 1850-1990 1850-1910 MHz/1930-1990 MHz TRANSMIT, 1930-1990 0.5 dB maximum (Tx) 18 dB minumum 40 dB minimum; 1850-1910 MHz 200 watts (+53) minimum TRANSMIT, 1000W (+60 dBm) minimum

-110 dBm (-153) maximum in Rx band, two/+43 dBm carriers in the Tx band TMA supply voltage, fed via the RF cable, +31 V maximum, 1.1 A -01: DC/AISG to issue N/A N/A 2.0 (Rx Port to Antenna Port) N/A

MECHANICAL SPECIFICATIONS
Dimensions mm(in) Weight kg(lbs) Volume Color Housing RF Connectors Mounting_Kit 163 x 181 x 65 (6x 7x 3) 3.3 (7.3) maximum N/A Off White (NCS 1502-R) Aluminum DIN 7/16 female Hose Clamps in Stainless Steel

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit) MTBF Lightning Protection Safety Ingress Protection Environmental EMC -40to +65(-40to +149) 10 Million Hours IEC 61312-1 EN 60 950, UL 1950 IP65, EN 60 529 ETS 300 019 N/A

D031-08691A

Updated: 2010-01-05

70

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Filters

LGP141nn

Triplex Filter for 900, 1800 MHz and UMTS with DC Transparency

TECHNICAL SPECIFICATIONS
Range (MHz) Frequency Range (Full Band MHz) Peak Power (dBm) Insertion Loss (dB) 900 Port, 880-960 1600 W (+62) PEP 0.1 dB typical (0.2 dB max.) 20 dB minimum 350 W (+55) max. 3rd Order: -100 dBm; 5th Order: -116 dBm (Rx band products w/2x43 dBm in Tx band) 880-2170 1800 Port, 1710-1880 1600 W (+62) PEP 0.1 dB typical (0.3 dB max. Rx, 0.6 dB max. Tx) 20 dB minimum 350 W (+55) max. 3rd Order: -100 dBm; 5th Order: -116 dBm (Rx band products w/2x43 dBm in Tx band) UMTS Port, 1920-2170 1600 W (+62) PEP 0.1 dB typical (0.5 dB max. Rx, 0.3 dB max. Tx)

Return Loss (dB) Average Power Handling (dBm) Intermodulation (IM) (dBc) (Products, Max)

20 dB minimum 350 W (+55) max. -116 dBm (Rx band products w/2x43 dBm in Tx band)

Isolation Between Ports Coupled Port Common+Port DC Bias/AISG Passthru -06 (single) DC Bias/AISG Passthru -07 (single) DC Bias/AISG Passthru -08 (single) DC Bias/AISG Passthru -09 (single) DC Bias/AISG Passthru -10 (single) DC Bias/AISG Passthru -11 (twin) DC Bias/AISG Passthru -12 (twin) DC Bias/AISG Passthru -13 (twin) DC Bias/AISG Passthru -14 (twin) DC Bias/AISG Passthru -15 (twin)

Rejection Between Ports (except common), >50 dB N/A TMA supply voltage, fed via the RF cable, +/-32 V maximum, 2 A -06: No Connection (DC Grounded) -07: DC/AISG to issue 2.0 (connected all ports) -08: DC/AISG to issue 2.0 (connected to 1800 & UMTS ports) -09: DC/AISG to issue 2.0 (connected to UMTS port) -10: DC/AISG to issue 2.0 (connected to 900 & UMTS ports) -11: No Connection (DC Grounded) -12: DC/AISG to issue 2.0 (connected all ports) -13: DC/AISG to issue 2.0 (connected to 1800 & UMTS ports) -14: DC/AISG to issue 2.0 (connected to UMTS port) -15: DC/AISG to issue 2.0 (connected to 900 & UMTS ports)

MECHANICAL SPECIFICATIONS
Dimensions mm(in) Weight kg(lbs) Color Housing RF Connectors Coupled Port Connector AISG Connector Mounting Kit 169 x 228 x 69.7 (6.65x 8.98x 2.75) <3.0 (6.5) Off White (NCS 1502-R) Aluminum, IP 65 (Optional IP 68) DIN 7/16 female N/A N/A Hose Clamps in Stainless Steel

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit) MTBF Safety Ingress Protection Environmental -40 C to +65 C (-40 to +149) 10 Million Hours EN 60 950, UL 60 950, ETL IP65, EN 60 529 ETS 300 019

D031-08652D

Updated: 2010-07-26

71

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Filters

LGP195nn

Co-Location Filter GSM900

TECHNICAL SPECIFICATIONS
Filter Type Frequency Range (MHz) Rx Passband Frequency Range (MHz) Tx Passband Frequency Range (MHz) Rx Passband Insertion Loss Tx Passband Insertion Loss Passband Return Loss Rejection Passband Power Handling (dBm) Passband Peak Power Handling (dBm) Intermodulation IM dBc Products Max -01: > 30 dB 869 to 889 MHz -01: 890-915 MHz -01: 935-960 MHz Co-Location Filter GSM900 890-960 -02: 890-915 MHz -02: 935-960 MHz < 0.5 dB >18 dB -02: > 37 dB 869 to 888 MHz -03: > 30 dB 869 to 895 MHz 200 watts (+53) minimum, 935 to 960 MHz (-01 & -02), 941 to 960 MHz (-03) 1585 watts (+62) minimum, 935 to 960 MHz (-01 & -02), 941 to 960 MHz (-03) -110 dBm (-153 dBc) maximum in Rx band, two/+43 dBm carriers in the Tx band -03: 896-915 MHz -03: 941-960 MHz

-01: <1.5 dB (<3.5 dB 890-892 MHz) -02: <1.0 dB (<1.8 dB 890-892 MHz) -03: <1.5 dB (< 3.5 dB 896-898 MHz)

MECHANICAL SPECIFICATIONS
Dimensions mm(in) Weight kg(lbs) Color Housing RF Connectors Mounting Kit 169 x 228 x 68 (7x 9x 2) 3.8 (8.4) maximum Off White (NCS 1502-R) Aluminum, Powder Coated DIN 7/16 female Hose Clamps in Stainless Steel

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit) Operating Humidity Range MTBF Ingress Protection -5 to +55 (23 to +131 ) 0 to +95% Relative Humidity >10 Million Hours IP65

D031-08692A

Updated: 2010-12-02

72

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Filters

LGP219nn

Diplex Filter for 800/900 MHz and 1800/1900/2100 MHz with Configurable DC Transparency

TECHNICAL SPECIFICATIONS
Filter Type Range (MHz) Frequency Range (Full Band MHz) Frequency Range (MHz) Insertion Loss (dB) Return Loss (dB) Rejection Average Power Handling (dBm) Peak Power (dBm) Intermodulation (IM) (dBc) (Products, Max) Common+Port DC Bias/AISG Passthru (single) <0.1 dB Typical 20 dB minimum 824-960 Port, 824-960 MHz Diplex Filter for 800/900 MHz and 1800/1900/2100 824-2170 824-960 MHz/1710-2170 MHz 1710-2100 Port, 1710-2170 MHz <0.2 dB Typical 20 dB minimum

50 dB minimum; 1710-2170 MHz 50 dB minimum; 824-960 MHz 850 MHz: 500 watts (+57); 900 MHz: 350 watts (+55) 350 watts (+55) max. max. 850 MHz: 5 kW (+67) PEP; GSM: 2.8kW (+64.5) PEP DCS/UMTS: 2.8 kW (+64.5) PEP; PCS: 5 kW (+67) PEP -110 dBm (-153) maximum in Rx band, two/+43 dBm carriers in the Tx band TMA supply voltage, fed via the RF cable, +31 V maximum, 2 A -01: No Connection (DC -02: DC/AISG to issue -03: DC/AISG to issue -04: DC/AISG to issue Grounded) 2.0 (connected all ports) 2.0 (1710-2100 Port to 2.0 (824-960 Port to Antenna Port) Antenna Port) -05: No Connection (DC -06: DC/AISG to issue -07: DC/AISG to issue -08: DC/AISG to issue Grounded) 2.0 (connected all ports) 2.0 (1710-2100 Port to 2.0 (824-960 Port to Antenna Port) Antenna Port)

DC Bias/AISG Passthru (twin)

MECHANICAL SPECIFICATIONS
Dimensions mm(in) Weight kg(lbs) Volume Color Housing RF Connectors Mounting_Kit 112 x 158 x 74 (4x 6x 3) 2.5 (5.5) maximum 1.3 liter single unit Off White (NCS 1502-R) Aluminum DIN 7/16 female Hose Clamps in Stainless Steel

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit) MTBF Lightning Protection Safety Ingress Protection Environmental EMC -40to +65(-40to +149) 10 Million Hours According to IEC 61312-1, 3kA 10/350 uS;center pin (any port)-shield EN 60 950, UL 1950, ETL IP65, EN 60 529 ETS 300 019 ETS 300 342-3

D031-08693C

Updated: 2010-07-26

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

73

Rapid Mobile Deployment and Enclosure Solutions

Power wave

Powerwaves innovative outdoor enclosure and mobile platform solutions offer flexible combinations of density and serviceability through state of the art modular design and construction. Network operators around the world have made Powerwaves enclosure and mobile platforms their premier choice for housing and deploying critical network infrastructure equipment.

MicroFlex Outdoor Enclosures RapidFlex Mobile Deployment Unit SubTerra Controlled Environment Vault VersaFlex Shelter Solutions

RMDU and Enclosures Solutions

POWERWAVE

MicroFlex Outdoor Enclosures

Rapid Mobile Deployment and Enclosure Solutions


MicroFlex Outdoor Enclosures

Title MicroFlex Low-Profile Enclosure for Backhaul and E911 Applications MicroFlex 48RU Outdoor Enclosure

Part Number MF0-004-000-002 MF0-048-000-001

Page 77 78

76

POWERWAVE

MicroFlex

MF0-004-000-002

MicroFlex Low-Profile Enclosure for Backhaul and E911 Applications

Powerwaves Microflex outdoor enclosure provides 4RU of rack space in a compact foot print. The complete Microflex enclosure product line is configured to order with interchangeable options and accessories.

GENERAL SPECIFICATIONS
Material High Strength Finish High Strength Corrosion Resistant Aluminum Construction TGIC Powdercoat, Color RAL 7035

WEIGHTS & MEASURES


Dimensions mm(in) Weight kg(lbs) 914 x 685 x 254 (36 x 27 x 10) 40 (88) (baseline configuration)

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Wind m/s (mph) Audible Noise (db-A) Thermal Electric Cooling Power -10C to 50C 67 (150) 57.0 (not including installed equipment) 200W (calculated 190W @ dT = 0 degree C +/- 10%)

ELECTRICAL SPECIFICATIONS
Rated Current (max.) Start-up Current (max.) 11.3A/5.5A @ +24VDC/-48VDC 14.1A/7.0A @ +24VDC/-48VDC

COMPLIANCE (pending)
GR487 CORE UL50 CE RoHS IP55

Updated: 2010-07-21

77

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

MicroFlex

MF0-048-000-001

MicroFlex 48RU Outdoor Enclosure

Powerwaves Microflex outdoor enclosure provides 48RU of rack space in a compact foot print. The complete Microflex enclosure product line is configured to order with interchangeable options and accessories.

GENERAL SPECIFICATIONS
Material High Strength Finish High Strength Corrosion Resistant Aluminum Construction TGIC Powdercoat, Color RAL 7035

WEIGHTS & MEASURES


Dimensions mm(in) Weight kg(lbs) 2400mm H x 1755mm W x 817mm D (94.5in H x 70.0in W x 32.0in D) 436 kg ( 961lbs) (Cabinet only, no equipment)

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Wind m/s (mph) Audible Noise (db-A) -50C to 70C (Internal temperature is dependant on equipment heat load and thermal management options) 67 (150) 57.0 to 65 (depending on thermal management)

COMPLIANCE
GR487 CORE UL50 CE RoHS IP55

Updated: 2010-12-09

78

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

RMDU and Enclosures Solutions

POWERWAVE

RapidFlex Mobile Deployment Unit

Rapid Mobile Deployment and Enclosure Solutions


RapidFlex Mobile Deployment Unit

Title RapidFlex Mobile Deployment Unit

Part Number CW0-000-000-003

Page 80

79

POWERWAVE

RapidFlex

CW0-000-000-003

RapidFlex Mobile Deployment Unit (RMDU)

GENERAL SPECIFICATIONS
Axle: Quantity Axle: Type Brakes Suspension Wheel Bolt Pattern Safety Chains 12V Trailer End Connector Coax Real Diesel Generator,Weather Proof Sound Attenuated Enclosure 7-Bay Telecommunications Shelter Hydraulic Auto Leveling Micro Footprint, Hydraulic Powered Outriggers Dual Tandem HD Straight Electric Leaf 8 Bolt Yes 7-Way Up to (24) 1/2 Coax or (6) 7/8 Coax + 1 flexible conduit Up to 50kW Diesel with optional extended run time fuel tank Yes Yes Yes

WEIGHTS & MEASURES


Trailer Width Trailer Length Travel Length Overall Width Overall Height Platform Height Tire Size/Type Hitch Ball Size Hitch Weight (lbs) Curb Weight (lbs) GVWR (lbs) GAWR (lbs) Average Payload Capacity (lbs) Tower Height (ft) Maximum Tower Loading (lbs) 76 34 36 76 13 6 24 235-75R17.5 Gooseneck 2 5/16 3,000 20,000 30,000 15,000 10,000 98 650

ACCESSORIES INCLUDED
Full-size spare tire Tire changing tool kit Safety pull-away chains Sealed beam DOT lighting package and reflective striping (complies w/ DOT Federal Motor Carrier safety regulations in all 50 states) 7-way electrical hook-up Operation and maintenance manuals Lockable tool box Complete system grounding kit Self-guy kit

ADDITIONAL OPTIONS AVAILABLE


Automatic Transfer Switch Extended Run Double Wall Fuel Tank FAA aviation obstruction lighting kit Heavy duty copper keeper Extended Run Double Wall Fuel Tank 3-way antenna mount Wind Speed Anemometer Wireless Platform Access and Control, PDA

*All dimensions are nominal and specifications are subject to change without notice.

Updated: 2010-12-29

80

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

RMDU and Enclosures Solutions

POWERWAVE

SubTerra Controlled Environment Vault

Rapid Mobile Deployment and Enclosure Solutions


SubTerra Controlled Environment Vault

Title SubTerra Controlled Environment Vault

Part Number CEV-000-000-001

Page 82

81

POWERWAVE

SubTerra

CEV-000-000-001

SubTerra Controlled Environment Vault

Powerwaves Controlled Environment Vault provides 184RU of rack space in a compact foot print. The complete CEV product line is configured to order with interchangeable options and accessories.

GENERAL SPECIFICATIONS
Material High Strength Finish Fiberglass and High Strength Corrosion Resistant Aluminum Construction Brushed Aluminum

WEIGHTS & MEASURES


Dimensions mm(in) Weight kg(lbs) 3860 x 1955 x 3505 (152 x 77 x 138) 3401 (7500) (baseline configuration)

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Wind m/s (mph) Audible Noise (db-A) -40C to 60C (Internal temperature is dependant on equipment heat load and thermal management options) 67 (150) 57.0 to 65 (depending on thermal management options)

COMPLIANCE
Designed to GR487 CORE UL Listed CE RoHS Designed to IP55

Updated: 2010-12-09

82

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

RMDU and Enclosures Solutions

POWERWAVE

VersaFlex Shelter Solutions

Rapid Mobile Deployment and Enclosure Solutions


VersaFlex Shelter Solutions

Title
VersaFlex 7.0 High-Cube Outdoor Shelter VersaFlex 9.0 High-Cube Outdoor Shelter

Dimensions (ft)
2591 x 3048 x 2286 mm (102 x 120 x 90) 2591 x 4191 x 2286 mm (102 x 165 x 90)

Weight (lbs)
1590 (3500) 1814 (4000)

Page
84 85

83

POWERWAVE

VersaFlex

VersaFlex (7 Bay)

VersaFlex Enclosure Solutions

SPECIFICATIONS
Length ft (m) Width ft (m) Height in (m) Weight lbs (kg) HVAC Radio Frames Minimum Lease Required 10 (3.05) 76 (2.29) 86: (2.59) 4000 (1814) 2x3 Ton 7 10L x 76W = 75 Sq. Ft. (3.05L x 2.29W = 6.98m2)

Key Features/Benefits:

. . . . .

Utilizes approximately half the space of traditional Shelters. Standard weighs only 4,000 lbs (1814 kg) vs. the 30,000 (13608 kg) to 50,000 lbs (22680 kg) of traditional shelters. Internal sub-floor HVAC system that eliminates hot spots. Sliding door design reduces lease area requirements by eliminating door swing. Sliding equipment racks that reduce floor space required and utilizes a rolling cable tray

VersaFlex (7 Bay) Enclosure

D031-08439 Rev. D 07/08

Updated: 2010-07-21

84

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

VersaFlex

VersaFlex (9 Bay)

VersaFlex Enclosure Solutions

SPECIFICATIONS
Length ft (m) Width ft (m) Height in (m) Weight lbs (kg) HVAC Radio Frames Minimum Lease Required 139 (4.19) 76 (2.29) 86: (2.59) 4750 (2155) 2x5 Ton 9 139L x 76W = 103.1 Sq. Ft (4.19L x 2.29W = 9.60m2)

Key Features/Benefits:

. . . . .

Utilizes approximately half the space of traditional Shelters. Standard weighs only 4,000 lbs (1814 kg) vs. the 30,000 (13608 kg) to 50,000 lbs (22680 kg) of traditional shelters. Internal sub-floor HVAC system that eliminates hot spots. Sliding door design reduces lease area requirements by eliminating door swing. Sliding equipment racks that reduce floor space required and utilizes a rolling cable tray

VersaFlex (9 Bay) Enclosure

D031-08439 Rev. D 07/08

Updated: 2010-07-21

85

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

RMDU and Enclosure Solutions

POWERWAVE

Rapid Mobile Deployment and Enclosure Solutions

Page

MicroFlex Outdoor Enclosures RapidFlex Mobile Deployment Unit SubTerra Controlled Environment Vault VersaFlex Shelter Solutions

76 79 81 83

75

Coverage Products

Power wave

Powerwaves Coverage products include turn- key coverage and capacity products and solutions that give network operators, facilities owners and neutral hosts an edge over the competition. We specialize in innovative products and solutions from the simplest to the most challenging indoor and outdoor environments that help improve coverage, signal quality and capacity. Our efficient, modular and integrated solutions drive down capital and operating expenses.

Repeater Products In-Building and Outdoor DAS Products Repeater Remote Management Products

Coverage Products

POWERWAVE

Coverage Products

Repeater Products Channel Selective Standard Repeaters Band Selective Compact Repeaters Band Selective Standard Repeaters Advanced Train Repeaters Digital Repeaters In-Building and Outdoor DAS Products, Public Safety Networks Bi-Directional Amplifiers LinkNet Convergence Platform Optical and RF Conversion Modules Tap-In Signal Taps NexusFT - Public Safety In-Building and Outdoor DAS Products, Commercial Wide Band Radio Heads Nexus FT Single and Dual Band Nexus FT Rack Mounts Repeater Remote Management IP/SNMP/GPS Repeater Remote Management Interface

Page 89 113 144 157


162

Page 167 170 178 179 181 Page 183 186 221 Page 226

87

Repeater Products

Power wave

Repeater products provide cost-effective coverage solutions for airports, railway stations, tunnels, convention centers, canyons and other environments where structures or natural obstructions interfere with signals. What sets Powerwave repeater products apart is our exceptionally low total lifetime cost. This is due to a number of factors. Our high level of integration delivers a compact form factor that eliminates/minimizes site rental costs.

Channel Selective Standard Repeaters Band Selective Compact Repeaters Band Selective Standard Repeaters Advanced Train Repeaters Digital Repeaters

Coverage Products

POWERWAVE

Channel Selective Standard Repeaters

Repeater Products

Title Range (MHz) Upgrade Standard Channel Selective,1800 GSM MHz Upgrade Standard Channel Selective,2100 GSM MHz Standard Channel Selective, 900 MHz Standard Channel Selective, 900 MHz Standard Channel Selective, 900 MHz Standard Channel Selective, 900 MHz Standard Channel Selective, 900 MHz Standard Channel Selective, 1800 MHz Standard Channel Selective, 1800 MHz Standard Channel Selective, 1800 MHz Standard Channel Selective,1900 MHz Standard Channel Selective, 2100 MHz Standard Dual Band Channel Selective, 2100MHz Standard Repeater Dual Band Channel Selective, 2100MHz Standard Dual Band Channel Selective, 2100MHz Standard Channel Selective, 2100 MHz RGSM EGSM EGSM EGSM GSM GSM GSM GSM GSM WCDMA WCDMA2100

No. of Channels 4

Bandwidth 200 KHz/channel

Part Number AR0027/50409

Page 91

2 2 or 4 4 4 2 6 2 4 6 4 2 2

200 KHz/channel 200 KHz/channel 200 KHz/channel 200 KHz/channel 200 KHz/channel 200 KHz/channel 200 KHz/channel 200 KHz/channel 200 KHz/channel 200 KHz/channel 4.4 MHz/channel 4.4 MHz/channel

AR0065/00109 AR1700/80 AR1700/90419 AR1700/90409 AR1700/90209 AR1717/90609 AR2700/50209 AR2700/50409 AR2727/50609 AR3700/50409 AR6500/00109 AR6512/00239

92 93 94 95 96 97 98 99 100 101 102 103

WCDMA2100

4.4 MHz/channel

AR6512/00229

104

WCDMA2100 WCDMA2100

2 2

4.4 MHz/channel 200 KHz/channel

AR6517/01429 AR6517/01439

105 106

89

Coverage Products

POWERWAVE

Channel Selective Standard Repeaters

Repeater Products

Title Standard Channel Selective, 2100 MHz Standard Channel Selective, 2100 MHz Standard Channel Selective, 2100 MHz Dual Band Channel Selective 2100/1800 Dual Band Channel Selective, 2100 MHz Standard Channel Selective, 2100 MHz

Range (MHz) WCDMA2100 WCDMA2100 WCDMA2100 WCDMA2100 WCDMA2100 WCDMA2100

No. of Channels 2 2 1 to 2 1 to 2 2 2

Bandwidth 200 KHz/channel 200 KHz/channel 200 KHz/channel 4.4 MHz/channel 4.4 MHz/channel 4.4 MHz/channel

Part Number AR6517/01429 AR6517/01459 AR6522/01100 AR6522/01109 AR6522/91100 AR6560/00209

Page 107 108 109 110 111 112

90

POWERWAVE

Channel Selective Standard Repeaters

AR0027/50409
ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

Upgrade Standard Repeater Channel Selective 1800MHz GSM, 4CH, Stand Alone, Seperated Donor/Service
Bottom Section N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Door Section GSM1800 1710-1785 1805-1880 4 200 KHz/channel +28 dBm/channel +28 dBm/channel 55 to 90 dB 4 dB 6 s

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section N/A N/A N/A Door Section 115/230 VAC N/A 250 W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section N/A N/A N/A N/A N/A N/A N/A Door Section N/A N/A N/A N/A N/A N/A N/A

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N/A N/A N/A Door Section N-female 440 x 530 x 195 (15x19x8) 22 (48)

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section N/A N/A Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes: *Stand alone

Bottom Section N/A N/A

Door Section TS 45.005 EN 301 489-1

Updated: 2010-12-08

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

91

POWERWAVE

Channel Selective Standard Repeaters

AR0065/00109

UPGRADE STANDARD REPEATER CHANNEL SELECTIVE 2100MHz WCDMA, 2CH, STAND ALONE, SEPARATE DONOR AND SERVICE
Bottom Section N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Door Section WCDMA 2100 1920 -1980 2110 - 2170 2 4.4 channel 2ch +25 dBm/channel 2ch +15 dBm/channel 55 to 85 dB DL 6 dBUL 4 dB 6 s

ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section N/A N/A N/A Door Section 115/230 VAC N/A 160 W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section N/A N/A N/A N/A N/A N/A N/A Door Section N/A N/A N/A N/A N/A N/A N/A

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N/A N/A N/A Door Section N-female 440 x 530 x 195 (15x19x8) 22 (48)

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section N/A N/A Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes: *Stand alone

Bottom Section N/A N/A

Door Section TS 125 106 TS 125 113

Updated: 2010-12-08

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

92

POWERWAVE

Channel Selective Standard Repeaters

AR1700/80

Standard Channel Selective, GSM-R 900MHz

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM GSM-R 876-880 921-925 2 or 4 200 KHz/channel 2ch: +33 dBm/channel, 4ch: +29 dBm/channel 2ch: +33 dBm/channel, 4ch: +29 dBm/channel 55 to 90 dB 4 dB 5 s

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC 21-60 VDC (optional) 2ch: 160W, 4ch: 250W

REMOTE CONTROL
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female (7/16 option) 440x530x195 (15x19x8) 22 (48)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 45.005 EN 301 489-1


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-08

93

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR1700/90419

STANDARD CH SEL REPEATER 900MHz EGSM,4CH,AC PSU,7/16 CON,GSM/GPRS REMOTE CONTROL,DOOR SW,LOCK-KEYS

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM EGSM 880-915 925-960 4 200 KHz/channel +29 dBm/channel +29 dBm/channel 55 to 90 dB 4 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC N/A 250W

REMOTE CONTROL
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) 7/16-female 440x530x195[280] (15x19x8 [11]) 22[37]

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 45.005 EN 301 489-1


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-14

94

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR1700/90409

STANDARD CH SEL REPEATER 900MHz EGSM, 4CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM EGSM 880-915 925-960 4 200 KHz/channel +29 dBm/channel +29 dBm/channel 55 to 90 dB 4 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC N/A 250W

REMOTE CONTROL
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x195[280] (15x19x8 [11]) 22[37]

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 45.005 EN 301 489-1


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-14

95

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR1700/90209

STANDARD CHANNEL SELECTIVE REPEATER 900MHz EGSM, 2CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM EGSM 880-915 925-960 2 200 KHz/channel +33 dBm/channel +33 dBm/channel 55 to 90 dB 4 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC N/A 160W

REMOTE CONTROL
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x195[280] (15x19x8 [11]) 22[37]

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 45.005 EN 301 489-1


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-08

96

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR1717/90609

STANDARD CHANNEL SELECTIVE REPEATER 900MHz EGSM, 6CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM EGSM 880-915 925-960 6 200 KHz/channel +26 dBm/channel +26 dBm/channel 55 to 90 dB 4 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC N/A 410W (2 Separate PSUs)

REMOTE CONTROL
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x195[280] (15x19x8 [11]) 48[82]

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 45.005 EN 301 489-1


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-08

97

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR2700/50209

STANDARD CHANNEL SELECTIVE REPEATER 1800MHz GSM, 2CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM GSM 1710-1785 1805-1880 2 200 KHz/channel +32 dBm +32 dBm 55 to 90 dB 4 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC N/A 160W

REMOTE CONTROL
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWV 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x195 (15x19x8) 22[37]

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 45.005 EN 301 489-1


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-08

98

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR2700/50409

STANDARD CHANNEL SELECTIVE REPEATER 1800MHz GSM, 4CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM GSM 1710-1785 1805-1880 4 200 KHz/channel +28 dBm/channel +28 dBm/channel 55 to 90 dB 4 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC N/A 160W

REMOTE CONTROL
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWV 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x195 (15x19x8) 22[37]

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 45.005 EN 301 489-1


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-14

99

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR2727/50609

STANDARD CHANNEL SELECTIVE REPEATER 1800MHz GSM, 6CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM GSM 1710-1785 1805-1880 6 200 KHz/channel +25 dBm/channel +25 dBm/channel 55 to 90 dB 4 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC N/A 410W

REMOTE CONTROL
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x280 (15x19x11) (48[82])

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 45.005 EN 301 489-1


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-08

100

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR3700/50409

STANDARD CHANNEL SELECTIVE REPEATER 1900MHz GSM, 4CH, 850/1900 MHz GSM/GPRS REMOTE CONTROL, DOOR SW,LOCK-KEYS

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM GSM 1850-1910 1930-1990 4 200 KHz/channel +28 dBm/channel +28 dBm/channel 55 to 90 dB 4 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC NA 4ch: 250W

REMOTE CONTROL
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 850/1900 Dual Mode Wireless GPRS Packet Data Interface 850 / 1900 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female (7/16 option) 440x530x195 (15x19x8) 22(48)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 45.005 EN 301 489-1


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-08

101

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR6500/00109

Standard Channel Selective Repeater 2100MHz WCDMA, 2Channel, GSM/GPRS REMOTE CONTROL, DOOR Switch

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM WCDMA 1920 -1980 2110 - 2170 2ch 4.4 MHz/channel +25 dBm channel +15 dBm/channel DL 55 to 85 dB, UL 55 to 85 dB DL 6 dB, UL 4 dB 6 s

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC NA 160 W

REMOTE CONTROL
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x195 (15x19x8) 22[37]

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 125 106 TS 125 113


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-08

102

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR6512/00239

Standard Repeater DualBand Channel Selective 2100MHz WCDMA, 2Ch / Band Selective 900MHz GSM, 25MHz Bandwidth, GSM/GPRS REM CTRL, Separated Donor and Combined Service, Door Switch
Bottom Section WCDMA2100 1920 -1980 2110 - 2170 2ch 4.4 channel +24 dBm channel +15 dBm/channel 55 to 85 dB UL 5 dB, DL 7 dB 6 s Door Section GSM 900 890-915 935-960 Band Selective 25 MHz +25 dBm composite +26 dBm composite 55 to 85 dB 6 dB 6 s

ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 115/230 VAC NA 160 W Door Section 115/230 VAC NA 200W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N-female 440 x 530 x 280 (1 5x19x11) 37 (82) Door Section N-female N/A N/A

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes:

Bottom Section TS 125 106 TS 125 113

Door Section TS 45.005 EN 301 489-1

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

103

POWERWAVE

Channel Selective Standard Repeaters

AR6512/00229

Standard Repeater Dual Band Channel Selective 2100MHz WCDMA, 2Ch / Band Selective 900MHz GSM, 25MHz Bandwidth, GSM/GPRS REM CTRL, Combined Donor and Service, Door Switch
Bottom Section WCDMA2100 1920 -1980 2110 - 2170 2ch 4.4 channel +24 dBm/channel +14 dBm/channel 55 to 85 dB UL 6 dB, DL 8 dB 6 s Door Section GSM 900 890-915 925-960 Broad band 25 MHz 24 dBm composite 24 dBm composite 55 to 85 dB 7 dB 6 s

ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 115/230 VAC NA 160 W Door Section 115/230 VAC NA 200W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section NA NA NA NA NA NA NA

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N-female 440 x 530 x 280 (1 5x19x11) 37 (82) Door Section N-female N/A N/A

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes:

Bottom Section TS 125 106 TS 125 113

Door Section TS 45.005 EN 301 489-1

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

104

POWERWAVE

Channel Selective Standard Repeaters

AR6517/01429

Standard Repeater Dual Band Channel Selective 2100MHz WCDMA, 2Ch / 900MHz GSM, 4Ch, GSM/GPRS REM CTRL, Combined Donor and Service, Door Switch
Bottom Section WCDMA2100 1920 -1980 2110 - 2170 2ch 4.4 channel +24 dBm/channel +14 dBm/channel 55 to 85 dB UL 6 dB DL 8 dB 6 s Door Section GSM 900 890 - 915 935 - 960 4ch 200 KHz/channel +28 dBm/channel N/A 55 to 90 dB 5 dB 6 s -

ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 115/230 VAC NA 160 W Door Section 115/230 VAC NA 250W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section NA NA NA NA NA NA NA

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N-female 440 x 530 x 280 (1 5x19x11) 37 (82) Door Section N-female N/A N/A

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes:

Bottom Section TS 125 106 TS 125 113

Door Section TS 45.005 EN 301 489-1

Updated: 2010-12-06

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

105

POWERWAVE

Channel Selective Standard Repeaters

AR6517/01439

Standard Repeater DualBand Channel Selective 2100MHz WCDMA, 2Ch / 900MHz GSM, 4Ch, GSM/GPRS REM CTRL, Separated Donor and Combined Service, Door Switch
Bottom Section WCDMA2100 1920 -1980 2110 - 2170 2ch 4.4 channel +24 dBm/channel +15 dBm/channel 55 to 85 dB UL 5 dB DL 7 dB 6 s Door Section GSM 900 890 - 915 935 - 960 4ch 200 KHz/channel +28 dBm/channel +29 dBm/channel 55 to 90 dB 4 dB 6 s -

ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 115/230 VAC NA 160 W Door Section 115/230 VAC NA 250W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section NA NA NA NA NA NA NA

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N-female 440 x 530 x 280 (1 5x19x11) 37 (82) Door Section N-female N/A N/A

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes:

Bottom Section TS 125 106 TS 125 113

Door Section TS 45.005 EN 301 489-1

Updated: 2010-12-06

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

106

POWERWAVE

Channel Selective Standard Repeaters

AR6517/01429

Standard Repeater Dual Band Channel Selective 2100MHz WCDMA, 2Ch / 900MHz GSM, 4Ch, GSM/GPRS REM CTRL, Combined Donor and Service, Door Switch
Bottom Section WCDMA2100 1920 -1980 2110 - 2170 2ch 4.4 channel +24 dBm/channel +14 dBm/channel 55 to 85 dB UL 6 dB DL 8 dB 6 s Door Section GSM 900 890 - 915 935 - 960 4ch 200 KHz/channel +28 dBm/channel N/A 55 to 90 dB 5 dB 6 s -

ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 115/230 VAC NA 160 W Door Section 115/230 VAC NA 250W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section NA NA NA NA NA NA NA

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N-female 440 x 530 x 280 (1 5x19x11) 37 (82) Door Section N-female N/A N/A

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes:

Bottom Section TS 125 106 TS 125 113

Door Section TS 45.005 EN 301 489-1

Updated: 2010-12-06

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

107

POWERWAVE

Channel Selective Standard Repeaters

AR6517/01459

Standard Repeater DualBand Channel Selective 2100MHz WCDMA, 2Channels / 900MHz EGSM, 4Channels, AC PSU, 7/16 Connectors, GSM/GPRS REM CTRL, Separated Donor and Combined Service, DOOR Switch, LOCK-KEYS
Bottom Section WCDMA2100 1920 -1980 2110 - 2170 2ch 4.4 channel +24 dBm channel +15 dBm/channel 55 to 85 dB UL 5 dB DL 7 dB 6 s Door Section GSM 900 890 - 915 935 - 960 4ch 200 KHz/channel +28 dBm/channel +29 dBm/channel 55 to 90 dB 4 dB 6 s -

ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 115/230 VAC NA 160 W Door Section 115/230 VAC NA 250W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section NA NA NA NA NA NA NA

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section 7/16 female 440 x 530 x 280 (1 5x19x11) 37 (82) Door Section 7/16 female N/A N/A

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes:

Bottom Section TS 125 106 TS 125 113

Door Section TS 45.005 EN 301 489-1

Updated: 2010-12-06

108

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR6522/01100
ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

Dual Band 2100/1800LB Channel Selective/Band Selective

Bottom Section WCDMA2100 1920 -1980 2110 - 2170 1 to 2 4.4 channel 1ch +30 dBm/channel, 2ch +25 dBm/channel 1ch +20 dBm/channel, 2ch +15 dBm/channel 55 to 85 dB UL 5 dBDL 7 dB 6 s

Door Section GSM 1800 LB 1710-1765 1805-1860 Broad band 16.9 MHz 29 dBm composit 29 dBm composit 55 to 85 dB 6 dB 6 s

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 115/230 VAC 21-60 VDC (optional) 160 W Door Section 115/230 VAC 21-60 VDC (optional) 200W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section Door Section

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N-female (7/16 option) 440 x 530 x 280 (1 5x19x11) 37 (82) Door Section N-female (7/16 option) N/A N/A

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes: Performance is affected by the way Donor and Service antenna is configured (any combination of separate or combined connection can be ordered). *If combined to common antenna, output power decrease 1dB and NF increase 1dB

Bottom Section TS 125 106 TS 125 113

Door Section TS 45.005 EN 301 489-1

Updated: 2010-12-08

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

109

POWERWAVE

Channel Selective Standard Repeaters

AR6522/01109

Standard Repeater DualBand Channel Selective 2100MHz WCDMA, 2Ch / Band Selective 1800MHz GSM Low Band, 16.9MHz Bandwidth, GSM/GPRS REM CTRL, Combined Donor and Service, Door Switch
Bottom Section WCDMA2100 1920 -1980 2110 - 2170 2ch 4.4 channel +24 dBm/channel +14 dBm/channel 55 to 85 dB UL 6 dB DL 8 dB 6 s Door Section GSM 1800 LB 1710-1765 1805-1860 Band Selective 16.9 MHz 28 dBm composite 28 dBm composite 55 to 85 dB 7 dB 6 s -

ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 115/230 VAC NA 160 W Door Section 115/230 VAC NA 200W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N-female 440 x 530 x 280 (1 5x19x11) 37 (82) Door Section N-female N/A N/A

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes:

Bottom Section TS 125 106 TS 125 113

Door Section TS 45.005 EN 301 489-1

Updated: 2010-12-08

110

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR6522/91100
ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

Dual Band 2100/1800LB Channel Selective/Band Selective

Bottom Section WCDMA2100 1920 -1980 2110 - 2170 1 to 2 4.4 channel 1ch +30 dBm/channel, 2ch +25 dBm/channel 1ch +20 dBm/channel, 2ch +15 dBm/channel 55 to 85 dB UL 5 dBDL 7 dB 6 s

Door Section GSM 1800 UB 1730-1785 1825-1880 Broad band 16.9 MHz 29 dBm composit 29 dBm composit 55 to 85 dB 6 dB 6 s

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 115/230 VAC 21-60 VDC (optional) 160 W Door Section 115/230 VAC 21-60 VDC (optional) 200W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section Door Section

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N-female (7/16 option) 440 x 530 x 280 (1 5x19x11) 37 (82) Door Section N-female (7/16 option) N/A N/A

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes: Performance is affected by the way Donor and Service antenna is configured (any combination of separate or combined connection can be ordered). *If combined to common antenna, output power decrease 1dB and NF increase 1dB

Bottom Section TS 125 106 TS 125 113

Door Section TS 45.005 EN 301 489-1

Updated: 2010-12-08

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

111

POWERWAVE

Channel Selective Standard Repeaters

AR6560/00209

Standard Channel Selective Repeater 2100MHz WCDMA, 2Ch, High Power, GSM/GPRS REMOTE CONTROL, Door Switch

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM WCDMA2100 1920 -1980 2110 - 2170 2ch 4.4 MHz/channel +32 dBm/channel +15 dBm/channel DL 65 to 95 dB, UL 55 to 85 dB DL 6 dB, UL 4 dB 6 s

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC NA 320W (2 separate PSU)

REMOTE CONTROL
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x195[280] (15x19x8 [11]) 48[82]

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 125 106 TS 125 113


Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

112

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Coverage Products

POWERWAVE

Band Selective Compact Repeaters

Repeater Products

Title Compact Repeater Band Selective, 2100 MHz Compact Band Selective, 900 MHz Compact Band Selective, 900 MHz Dual Cell Compact Repeater, 900 MHz Dual Cell Compact Repeater, 900 MHz Compact Band Selective, 1800 MHz Compact Band Selective, 1800 MHz Dual Band Compact Repeater, 1800MHz Dual Band Compact Repeater, 1800MHz Dual Band Compact Repeater, 1800MHz Compact Band Selective, 1900MHz Compact Band Selective, 1900MHz Compact Band Selective, 1900MHz

Range (MHz) WCDMA


GSM, HSPA+, LTE GSM, HSPA+, LTE

No. of Channels Band selective

Bandwidth (MHz) 0.5 to 15

Part Number
ALR0062/00109

Page 116

Band selective

0.5 to 25

ALR1200/90209

117

Band selective

0.5 to 25

ALR1200/00209

118

GSM
GSM, HSPA+, LTE GSM, HSPA+, LTE GSM, HSPA+, LTE

Broad band

0.5 to 15

ALR1212/00102

119

Band selective

0.5 to 25

ALR1212/00209

120

Band selective

0.5 to 25

ALR2200/00209

121

Band selective

0.5 to 25

ALR2200/90209

122

GSM, HSPA+, Band selective LTE GSM, HSPA+, Band selective LTE GSM, HSPA+, Band selective LTE TDMA Broad band

0.5 to 15

ALR2212/00119

123

0.5 to 15

ALR2212/00129

124

0.5 to 15

ALR2222/00109

125

0.5 to 15

ALR3200/00

126

TDMA

Band selective

0.5 to 15

ALR3200/00109

127

CDMA

Band selective

0.5 to 15

ALR3200/01109

128

113

Coverage Products

POWERWAVE

Band Selective Compact Repeaters

Repeater Products

Title Compact Band Selective, 1900MHz Compact Band Selective, 1900MHz Compact Dual Band Repeater, 1900MHz Compact Dual Band Repeater, 1900MHz Compact Dual Band Repeater, 1900MHz Compact Dual Band Repeater, 800MHz Compact Dual Band Repeater, 850MHz Compact Dual Band Repeater, 850MHz Compact Band Selective, 850MHz Compact Band Selective, 850MHz Compact Band Selective, 800MHz Compact Band Selective, 2100MHz Compact Dual Band 900/2100

Range (MHz) TDMA

No. of Channels Band selective

Bandwidth (MHz) 0.5 to 15

Part Number ALR3200/90109

Page 129

CDMA

Broad band

0.5 to 15

ALR3200/91109

130

CDMA

Band selective

0.5 to 15

ALR3232/51109

131

CDMA

Band selective

0.5 to 15

ALR3242/03039

132

CDMA

Band selective

0.5 to 15

ALR3246/00309

133

TDMA

Band selective

0.5 to 15/25

ALR4200/00209

134

CDMA

Band selective

0.5 to 15

ALR4200/01109

135

CDMA

Band selective

0.5 to 25

ALR4200/01209

136

CDMA

Broad band

0.5 to 25

ALR4600/00109

137

iDEN

Band selective

0.5 to 15

ALR4600/00119

138

iDEN WCDMA, HSPA+, LTE WCDMA

Band selective

0.5 to 18

ALR4600/00209

139

Band selective

0.5 to 15

ALR6200/00109

140

Band selective

0.5 to 15

ALR6212/90129

141

114

Coverage Products

POWERWAVE

Band Selective Compact Repeaters

Repeater Products

Title Dual Band Compact, 900/2100MHz

Range (MHz) WCDMA

No. of Channels Broad band

Bandwidth (MHz) 0.5 to 15

Part Number ALR6212/90139

Page 142

Compact In-train Band GSM, HSPA+, Broad band Selective, 900 MHz LTE

0.5 to 25

ALT1200/00209

143

115

POWERWAVE

Band Selective Compact Repeaters

ALR0062/00109

UPGRADE COMPACT REPEATER BAND SELECTIVE 2100MHz WCDMA, BW15MHz, STAND ALONE, SEPARATED DONOR/SERVICE

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM WCDMA, HSPA+, LTE 1920-1980 2110-2170 Band Selective 0.5 to 15 MHz +24 dBm Composite +20 dBm Composite 55 to 70 dB (Gain ripple in band +/-1 dB) DL 5 dB, UL 3 dB 6 s -51 dB (LTE) < 6.7% (LTE)

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 85-265 VAC 21-60 VDC 60W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management NA NA NA NA NA NA NA

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 385x385x55 (13x13x4) 10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 125.106 TS 125.113
Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

116

POWERWAVE

Band Selective Compact Repeaters

ALR1200/90209

COMPACT REPEATER BAND SELECTIVE 900MHz EGSM, BW25MHz, GSM/GPRS REMOTE CONTROL

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM GSM, HSPA+, LTE 880-905 925-950 Band Selective 0.5 to 25 MHz +22 dBm Composite +22 dBm Composite 55 to 70 dB (Gain ripple in band +/-1 dB) 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 85-265 VAC NA 60W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 385x385x110 (13x13x4) 10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 45.005, TS 25.143, TS 36.143 EN 301 489-1


Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

117

POWERWAVE

Band Selective Compact Repeaters

ALR1200/00209

COMPACT REPEATER BAND SELECTIVE 900MHz GSM, BW25MHz, GSM/GPRS REMOTE CONTROL

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM GSM, HSPA+, LTE 890-915 935-960 Band Selective 0.5 to 25 MHz +22 dBm Composite +22 dBm Composite 55 to 70 dB (Gain ripple in band +/-1 dB) 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 85-265 VAC NA 60W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 385x385x110 (13x13x4) 10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 45.005, TS 25.143, TS 36.143 EN 301 489-1


Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

118

POWERWAVE

Band Selective Compact Repeaters

ALR1212/00102

Dual Cell Compact Repeater GSM900, BW 15 MHz / GSM900, BW 15 MH with Wireless and Ethernet Remote Management, Combined service and donor ports
Bottom Section GSM 900 890-915 935-960 Broad band 0.5 to 15 MHz +22 dBm Composite +22 dBm Composit 55 to 70 dB 8 dB 6 s Door Section GSM 900 890-915 935-960 Broad band 0.5 to 15 MHz +22 dBm Composite +22 dBm Composite 55 to 70 dB 8 dB 6 s

ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 85-265 VAC 21-60 VDC (optional) 60W Door Section 85-265 VAC 21-60 VDC (optional) 60W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section Door Section

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N-female 385x385x160 (13x13x6) 18 (40) Door Section N-female N/A 8 (18)

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes: The combined output power at the service port is 3dB lower than the nominal output power for each repeater cell.

Bottom Section TS 45.005 EN 301 489-1

Door Section TS 45.005 EN 301 489-1

Updated: 2010-11-29

Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

119

POWERWAVE

Band Selective Compact Repeaters

ALR1212/00209

COMPACT REPEATER DUAL CELL 900MHz GSM, 25MHz BW/900MHz GSM, 25MHz BW, GSM/GPRS REMOTE CONTROL,COMBINED DONOR AND SERVICE
Bottom Section GSM, HSPA+, LTE 890-915 935-960 Band Selective 0.5 to 25 MHz +19 dBm Composite (Combined service ports) +19 dBm Composite (Combined donor ports) 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE) Door Section GSM, HSPA+, LTE 890-915 935-960 Band Selective 0.5 to 25 MHz +19 dBm Composite (Combined service ports) +19 dBm Composite (Combined donor ports) 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)

ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 85-265 VAC N/A 60W Door Section 85-265 VAC N/A 60W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section N/A N/A N/A N/A N/A N/A N/A

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N-female 385x385x160 (13x13x6) 18 (40) Door Section N/A N/A N/A

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes:

Bottom Section TS 45.005 EN 301 489-1

Door Section TS 45.005 EN 301 489-1

Updated: 2010-11-09

120

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Band Selective Compact Repeaters

ALR2200/00209

COMPACT REPEATER BAND SELECTIVE 1800MHz GSM LB, BW25MHz, GSM/GPRS REMOTE CONTROL

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM GSM, HSPA+, LTE 1710-1765 1805-1860 Band Selective 0.5 to 25 MHz +23 dBm Composite +23 dBm Composite 55 to 70 dB (Gain ripple in band +/-1 dB) 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 85-265 VAC NA 60W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x195 (15x19x7 ) 10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 45.005, TS 25.143, TS 36.143 EN 301 489-1


Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

121

POWERWAVE

Band Selective Compact Repeaters

ALR2200/90209

COMPACT REPEATER BAND SELECTIVE 1800MHz GSM UB, BW25MHz, GSM/GPRS REMOTE CONTROL

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM GSM, HSPA+, LTE 1730-1785 1825-1880 Band Selective 0.5 to 25 MHz +23 dBm Composite +23 dBm Composite 55 to 70 dB (Gain ripple in band +/-1 dB) 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 85-265 VAC NA 60W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x195 (15x19x7 ) 10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 45.005, TS 25.143, TS 36.143 EN 301 489-1


Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

122

POWERWAVE

Band Selective Compact Repeaters

ALR2212/00119

COMPACT REPEATER DUAL BAND GSM1800 LB/GSM900MHz, 15/15MHz BW, GSM/GPRS REM CTRL, SEPARATED DONOR/SERVICE
Bottom Section GSM, HSPA+, LTE 1710-1765 1805-1860 Band Selective 0.5 to 15 MHz +23 dBm Composite +23 dBm Composite 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE) Door Section GSM, HSPA+, LTE 890-915 935-960 Band Selective 0.5 to 15 MHz +22 dBm Composite +22 dBm Composite 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)

ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 85-265 VAC N/A 60W Door Section 85-265 VAC N/A 60W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section N/A N/A N/A N/A N/A N/A N/A

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N-female 385x385x160 (13x13x6) 18 (40) Door Section N/A N/A N/A

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes:

Bottom Section TS 45.005 EN 301 489-1

Door Section TS 45.005 EN 301 489-1

Updated: 2010-11-09

123

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Band Selective Compact Repeaters

ALR2212/00129

COMPACT REPEATER DUAL BAND GSM1800 LB/GSM900MHz, 15/15MHz BW, GSM/GPRS REM CTRL, COMBINED DONOR/SERVICE
Bottom Section GSM, HSPA+, LTE 1710-1765 1805-1860 Band Selective 0.5 to 15 MHz +22 dBm Composite +22 dBm Composite 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE) Door Section GSM, HSPA+, LTE 890-915 935-960 Band Selective 0.5 to 15 MHz +21 dBm Composite +21 dBm Composite 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)

ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 85-265 VAC N/A 60W Door Section 85-265 VAC N/A 60W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section N/A N/A N/A N/A N/A N/A N/A

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N-female 385x385x160 (13x13x6) 18 (40) Door Section N/A N/A N/A

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes:

Bottom Section TS 45.005 EN 301 489-1

Door Section TS 45.005 EN 301 489-1

Updated: 2010-11-09

124

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Band Selective Compact Repeaters

ALR2222/00109

Compact Repeater Dual Cell 1800MHz GSM LB, 15MHz BW/1800MHz GSM LB, 15MHz BW, GSM/GPRS Remote Control, Combined Donor And Service
Bottom Section GSM, HSPA+, LTE 1710-1765 1805-1860 Band Selective 0.5 to 15 MHz +20 dBm Composite (Combined service ports) +20 dBm Composite (Combined donor ports) 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE) Door Section GSM, HSPA+, LTE 1710-1765 1805-1860 Broad band 0.5 to 15 MHz +20 dBm Composite (Combined service ports) +20 dBm Composite (Combined donor ports) 55 to 70 dB 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)

ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 85-265 VAC N/A 60W Door Section 85-265 VAC N/A 60W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWV 3.2.2 and greater; local web interface Door Section N/A N/A N/A N/A N/A N/A N/A

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N-female 385x385x160 (13x13x6) 18 (40) Door Section N/A N/A N/A

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes: The combined output power at donor and service port is 3dB lower than the nominal output power for each repeater cell.

Bottom Section TS 45.005 EN 301 489-1

Door Section TS 45.005 EN 301 489-1

Updated: 2010-11-29

125

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Band Selective Compact Repeaters

ALR3200/00

Compact Band Selective, 1900 MHz

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TDMA 1850-1890 1930-1970 Broad band 0.5 to 15 MHz +25 dBm Composit +25 dBm Composit 55 to 70 dB 8 dB 6 s

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 85-265 VAC 21-60 VDC (optional) 60W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 385x385x110 (13x13x4) 10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

FCC Rule 24 FCC Rule 24


Note: Values within [ ] is valid for a max configuration

Updated: 2010-01-07

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

126

POWERWAVE

Band Selective Compact Repeaters

ALR3200/00109

COMPACT REPEATER BAND SELECTIVE 1900MHz GSM LB, BW15MHz, WIRELINE REMOTE CONTROL

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TDMA 1850-1890 1930-1970 Band Selective 0.5 to 15 MHz +25 dBm Composite +25 dBm Composite 55 to 70 dB 8 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 85-265 VAC NA 60W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management PSTN Unit NA NA NA NA NA NWM 3.2.2 and greater

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 385x385x110 (13x13x4) 10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

FCC Rule 24 FCC Rule 24


Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

127

POWERWAVE

Band Selective Compact Repeaters

ALR3200/01109

COMPACT REPEATER BAND SELECTIVE 1900MHz CDMA LB, BW15MHz, WIRELINE REMOTE CONTROL

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM CDMA 1850-1890 1930-1970 Band Selective 0.5 to 15 MHz +26 dBm Composite +23 dBm Composite 55 to 70 dB 8 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 85-265 VAC NA 60W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management PSTN Unit NWM 3.2.2 and greater

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 385x385x110 (13x13x4) 10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

FCC Rule 24 FCC Rule 24


Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

128

POWERWAVE

Band Selective Compact Repeaters

ALR3200/90109

COMPACT REPEATER BAND SELECTIVE 1900MHz GSM UB, BW15MHz, WIRELINE REMOTE CONTROL

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TDMA 1870-1910 1950-1990 Band Selective 0.5 to 15 MHz +25 dBm Composite +25 dBm Composite 55 to 70 dB 8 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 85-265 VAC NA 60W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management PSTN Unit NWM 3.2.2 and greater

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 385x385x110 (13x13x4) 10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

FCC Rule 24 FCC Rule 24


Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

129

POWERWAVE

Band Selective Compact Repeaters

ALR3200/91109

COMPACT REPEATER BAND SELECTIVE 1900MHz CDMA UB, BW15MHz, WIRELINE REMOTE CONTROL

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM CDMA 1870-1910 1950-1990 Band Selective 0.5 to 15 MHz +26 dBm Composite +23 dBm Composite 55 to 70 dB 8 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 85-265 VAC NA 60W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management PSTN Unit NWM 3.2.2 and greater

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 385x385x110 (13x13x4) 10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

FCC Rule 24 FCC Rule 24


Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

130

POWERWAVE

Band Selective Compact Repeaters

ALR3232/51109

COMPACT REPEATER DUAL CELL 1900MHz CDMA LB, 15MHz BW/1900MHz CDMA UB, 15MHz BW, COMBINED DONOR/SERVICE

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM CDMA 1870-1910 (UB)/ 1850-1890 (LB) 1950-1990 (UB)/ 1930-1970 (LB) Band Selective 0.5 to 15 MHz +23 dBm Composite (UB and LB combined ports) +23 dBm Composite (UB and LB combined ports) 55 to 70 dB 8 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 85-265 VAC NA 120W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management NA NA

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 385x385x160 (13x13x6) 18 (40)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

FCC Rule 24 FCC Rule 24


Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

131

POWERWAVE

Band Selective Compact Repeaters

ALR3242/03039
ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

COMPACT REPEATER DUAL BAND CDMA 1900 MHz LB/CDMA 800MHz, 15/15MHz BW, SEPARATED DONOR/SERVICE
Bottom Section CDMA 1900 1850-1890 1930-1970 Band Selective 0.5 to 15 MHz +26 dBm Composite +26 dBm Composite 55 to 70 dB 8 dB 6 s Door Section CDMA 800 824-849 869-894 Band Selective 0.5 to 15 MHz +26 dBm Composite +23 dBm Composite 55 to 70 dB 8 dB 6 s -

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 85-265 VAC NA 60W Door Section 115/230 VAC NA 60 W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section NA NA NA NA NA NA NA Door Section NA NA NA NA NA NA NA

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N-female 385x385x160 (13x13x6) 18 (40) Door Section N-female (7/16 option) N/A N/A

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes:

Bottom Section FCC Rule 24 FCC Rule 24

Door Section FCC Rule 22 FCC Rule 22

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

132

POWERWAVE

Band Selective Compact Repeaters

ALR3246/00309
ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

COMPACT REPEATER DUAL BAND GSM 1900 MHz LB/iDEN 800 MHz, 15/15MHz BW, SEPARATED DONOR/COMBINED SERVICE
Bottom Section GSM 1900 1850-1890 1930-1970 Band Selective 0.5 to 15 MHZ +24 dBm Composite +25 dBm Composite 55 to 70 dB 9 dB 6 s Door Section iDEN 806-824 851-869 Band Selective 0.5 to 15 MHz +24 dBm Composite +25 dBm Composite 55 to 70 dB 9 dB 6 s -

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 85-265 VAC NA 60W Door Section 115/230 VAC NA 60 W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section NA NA NA NA NA NA NA Door Section NA NA NA NA NA NA NA

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N-female 385x385x160 (13x13x6) 18 (40) Door Section N-female (7/16 option) N/A N/A

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes:

Bottom Section FCC Rule 24 FCC Rule 24

Door Section FCC Rule 90 FCC Rule 90

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

133

POWERWAVE

Band Selective Compact Repeaters

ALR4200/00209

COMPACT REPEATER BAND SELECTIVE 850MHz AMPS, BW25MHz, WIRELINE REMOTE CONTROL

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM TDMA 824-849 869-894 Band Selective 0.5 to 25 MHz +25 dBm Composite +25 dBm Composite 55 to 70 dB 8 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 85-265 VAC NA 60W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management PSTN Unit NA NA NA NA NA NWM 3.2.2 and greater

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 385x385x110 (13x13x4) 10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

FCC Rule 22 FCC Rule 22


Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

134

POWERWAVE

Band Selective Compact Repeaters

ALR4200/01109

COMPACT REPEATER BAND SELECTIVE 850MHz CDMA, BW15MHz, WIRELINE REMOTE CONTROL

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM CDMA 824-849 869-894 Band Selective 0.5 to 15 MHz +26 dBm Composite +23 dBm Composite 55 to 70 dB 8 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 85-265 VAC NA 60W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management PSTN Unit NA NA NA NA NA NWM 3.2.2 and greater

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 385x385x110 (13x13x4) 10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

FCC Rule 22 FCC Rule 22


Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

135

POWERWAVE

Band Selective Compact Repeaters

ALR4200/01209

COMPACT REPEATER BAND SELECTIVE 850MHz CDMA, BW25MHz, WIRELINE REMOTE CONTROL

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM CDMA 824-849 869-894 Band Selective 0.5 to 25 MHz +26 dBm Composite +23 dBm Composite 55 to 70 dB 8 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 85-265 VAC NA 60W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management PSTN Unit NA NA NA NA NA NWM 3.2.2 and greater

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 385x385x110 (13x13x4) 10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

FCC Rule 22 FCC Rule 22


Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

136

POWERWAVE

Band Selective Compact Repeaters

ALR4600/00109

COMPACT REPEATER BAND SELECTIVE 800 iPS, BW15MHz, WIRELINE REMOTE CONTROL

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM iDEN 806-824 851-869 Band Selective 0.5 to 15MHz +25 dBm Composite +25 dBm Composite 55 to 70 dB 8 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 85-265 VAC NA 60W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management PSTN Unit NA NA NA NA NA NWM 3.2.2 and greater

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 385x385x110 (13x13x4) 10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

FCC Rule 90 FCC Rule 90


Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

137

POWERWAVE

Band Selective Compact Repeaters

ALR4600/00119

COMPACT REPEATER BAND SELECTIVE 800 iPS, BW15MHz, 850/1900 MHz GSM/GPRS REMOTE CONTROL

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM iDEN 806-824 851-869 Band Selective 0.5 to 15MHz +25 dBm Composite +25 dBm Composite 55 to 70 dB 8 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 85-265 VAC NA 60W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP 850/1900 Dual Mode Wireless GPRS Packet Data Interface 850 / 1900 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 385x385x110 (13x13x4) 10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

FCC Rule 90 FCC Rule 90


Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

138

POWERWAVE

Band Selective Compact Repeaters

ALR4600/00209

COMPACT REPEATER BAND SELECTIVE 800 iPS, BW18MHz

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM iDEN 806-824 851-869 Band Selective 0.5 to 18MHz +25 dBm Composite +25 dBm Composite 55 to 70 dB 8 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 85-265 VAC NA 60W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management NA NA NA NA NA NA NA

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 385x385x110 (13x13x4) 10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

FCC Rule 90 FCC Rule 90


Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

139

POWERWAVE

Band Selective Compact Repeaters

ALR6200/00109

COMPACT REPEATER BAND SELECTIVE 2100MHz WCDMA, BW15MHz, GSM/GPRS REMOTE CONTROL

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM WCDMA, HSPA+, LTE 1920-1980 2110-2170 Band Selective 0.5 to 15 MHz +24 dBm Composite +20 dBm Composite 55 to 70 dB (Gain ripple in band +/-1 dB) DL 5 dB, UL 3 dB 6 s -51 dB (LTE) < 6.7% (LTE)

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 85-265 VAC NA 60W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 385x385x110 (13x13x4) 10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 125.106 TS 125.113
Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

140

POWERWAVE

Band Selective Compact Repeaters

ALR6212/90129

COMPACT REPEATER DUAL BAND WCDMA/EGSM, 2100/900MHz, 15/25MHz BW, GSM/GPRS REM CTRL,COMBINED DONOR AND SERVICE
Bottom Section WCDMA 2100 1920 -1980 2110 - 2170 Band Selective 0.5 to 15 +23 dBm Composite +19 dBm Composite 55 to 70 dB DL 5 dBUL 3 dB 6 s -51dB (LTE) < 6.7% (LTE) Door Section EGSM 900 880-915 925-960 Band Selective 0.5 to 25 MHz +21 dBm Composite +21 dBm Composite 55 to 70 dB 8 dB 6 s -

ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 85-265 VAC NA 60W Door Section 85-265 VAC NA 60W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section NA NA NA NA NA NA NA

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N-female 385x385x160 (13x13x6) 18 (40) Door Section N-female N/A N/A

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes:

Bottom Section TS 125 106 TS 125 113

Door Section TS 45.005 EN 301 489-1

Updated: 2010-11-09

141

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Band Selective Compact Repeaters

ALR6212/90139

COMPACT REPEATER DUAL BAND WCDMA/EGSM,2100/900MHz,15/25MHz BW,AC PSU,GSM/GPRS REM CTRL,SEPARATE DONOR/COMBINED SERVICE
Bottom Section WCDMA 2100 1920 -1980 2110 - 2170 Broad band 0.5 to 15 +23 dBm Composite +20 dBm Composite 55 to 70 dB DL 5 dBUL 3 dB 6 s -51dB (LTE) < 6.7% (LTE) Door Section EGSM 900 880-915 925-960 Band Selective 0.5 to 25 MHz +21 dBm Composite +22 dBm Composite 55 to 70 dB 8 dB 6 s -

ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 85-265 VAC NA 60W Door Section 85-265 VAC N/A 60W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section NA NA N/A N/A N/A N/A N/A

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N-female 385x385x160 (13x13x6) 18 (40) Door Section N-female N/A N/A

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes:

Bottom Section TS 125 106 TS 125 113

Door Section TS 45.005 EN 301 489-1

Updated: 2010-11-09

142

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Band Selective Compact Repeaters

ALT1200/00209

COMPACT IN-TRAIN REPEATER BAND SELECTIVE 900MHz GSM, BW25MHz, GSM/GPRS REMOTE CONTROL

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM GSM, HSPA+, LTE 890-915 935-960 Broad band 0.5 to 25 MHz +22 dBm Composite +22 dBm Composite 55 to 70 dB (Gain ripple in band +/-1 dB) 8 dB 6 s -51 dB (LTE) < 6.7% (LTE)

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 21-60 VDC N/A 60W

REMOTE CONTROL*
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 385x385x110 (13x13x4) 10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 45.005 EN 301 489-1


Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

143

Coverage Products

POWERWAVE

Band Selective Standard Repeaters

Repeater Products

Title Mini Repeater, 2100MHz Maritime Standard Band Selective, 900MHz Standard Band Selective, 900MHz Standard Band Selective, 900MHz Standard Band Selective, 1800MHz Standard Dual Band Selective, 1800MHz Standard Band Selective, 1900MHz Standard Band Selective, 1900MHz Standard Band Selective, 1900MHz Standard Band Selective, 850MHz Standard Band Selective, 800MHz Standard Band Selective, 800MHz

Range (MHz)
WCDMA

No. of Channels
Broad band

Bandwidth (MHz)
0.5 to 15

Part Number ALS6200/00

Page 145

GSM

Band selective

0.5 to 25

AM1200/05309

146

GSM, HSPA+

Broad band

0.5 to 25

AR1200/05309

147

GSM, HSPA+

Broad band

0.5 to 16.9

AR1200/95209

148

GSM

Band selective

0.5 to 16.9

AR2200/00109

149

GSM

Band selective

0.5 to 16.9

AR2212/05209

150

CDMA

Band selective

0.5 to 16.9

AR3400/01109

151

CDMA

Band selective

0.5 to 16.9

AR3400/91109

152

CDMA

Band selective

0.5 to 16.9

AR3434/51109

153

CDMA

Band selective

0.5 to 16.9

AR4200/01209

154

SMR/iDEN

Broad band

0.5 to 18

AR4600/05309

155

SMR/iDEN

Broad band

0.5 to 18

AR4640/05309

156

144

POWERWAVE

Band Selective Standard Repeaters

ALS6200/00

Mini Repeater, 2100 MHz

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay WCDMA 1920 -1980 2110 - 2170 Broad band 0.5 to 15 MHz +18 dBm Composit +18 dBm Composit 55 to 70 dB DL 6 dBUL 4 dB 6 s

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 100-240 VAC N/A 42W

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) SMA-female 270x365x70 (11x13x4) 5 (11)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification 0 to +104 (0 to +40 ) N/A

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 125 106 TS 125 113


Note: Values within [ ] is valid for a max configuration

Updated: 2010-11-02

145

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Band Selective Standard Repeaters

AM1200/05309

STANDARD BAND SELECTIVE MARITIME REPEATER 900MHz GSM, BW25MHz, GSM/GPRS/GPS REMOTE CONTROL, Door Switch

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM GSM 890-915 935-960 Band Selective 0.5 to 25 MHz +26 dBm Composite +26 dBm Composit 55 to 85 dB (Gain trail dynamic range: 30dB and gain trail tracking accuracy: 2dB) 6 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC N/A 200 W

REMOTE CONTROL
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP/GPS: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female (7/16 option) 440x530x195 (15x19x8) 22 (48)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 45.005 EN 301 489-1


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-06

146

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Band Selective Standard Repeaters

AR1200/05309

STANDARD BAND SELECTIVE REPEATER 900MHz GSM, BW25MHz, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM GSM, HSPA+ 890-915 935-960 Broad band 0.5 to 25 MHz +26 dBm Composite +26 dBm Composite 55 to 85 dB / Gain ripple in band +/-2 dB 6 dB 6 s 43 dB (HSPA+) < 6% (HSPA+)

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC N/A 200 W

REMOTE CONTROL
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x195 (15x19x8) 22 (48)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 45.005 EN 301 489-1


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-06

147

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Band Selective Standard Repeaters

AR1200/95209

STANDARD BAND SELECTIVE REPEATER 900MHz EGSM,BW16.9MHz,AC PSU,N CON,GSM/GPRS REMOTE CONTROL,DOOR SW,LOCK-KEYS

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM GSM, HSPA+ 880-915 925-960 Band Selective 0.5 to 16.9 MHz +26 dBm Composite +26 dBm Composite 55 to 85 dB / Gain ripple in band +/-2 dB 6 dB 6 s 43 dB (HSPA+) < 6% (HSPA+)

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC N/A 200 W

REMOTE CONTROL
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x195 (15x19x8) 22 (48)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 45.005 EN 301 489-1


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-06

148

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Band Selective Standard Repeaters

AR2200/00109

STANDARD BAND SELECTIVE REPEPEATER 1800MHz GSM LB, BW16.9MHz, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay ACCR EVM GSM 1710 - 1765 1805 - 1860 Band Selective 0.5 to 16.9 MHz +29 dBm Composite +29 dBm Composite 55 to 85 dB 6 dB 6 s -

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC N/A 200W

REMOTE CONTROL
Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x195 (15x19x7 ) 22 [48]

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

TS 45.005 EN 301 489-1


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-06

149

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Band Selective Standard Repeaters

AR2212/05209

STANDARD BAND SELECTIVE REPEATER DUAL BAND 1800MHz LB, BW16.9MHz/900MHz GSM, 16.9MHz BW, GSM/GPRS REMOTE CONTROL,COMBINED DONOR AND SERVICE, DOOR SWITCH
Bottom Section GSM 1800 1710 - 1765 1805 - 1860 Band Selective 0.5 to 16.9 +28 dBm Composite +28 dBm Composite 55 to 85 dB 6 dB 6 s Door Section GSM 900 890-915 935-960 Band Selective 0.5 to 16.9 MHz +25 dBm Composite +25 dBm Composite 55 to 85 dB 6 dB 6 s -

ELECTRICAL DATA*
Section Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth (MHz) Output Power DL Output Power UL Gain adjustment range Noise Figure Group Delay ACCR EVM

TECHNICAL SPECIFICATIONS*
Section Power Supply Power Supply (Optional) Power Consumption Bottom Section 115/230 VAC N/A 200 W Door Section 115/230 VAC N/A 200 W

REMOTE CONTROL*
Section Type Wireless MOD EM Frequencies Packet Data Mode Fallback Circuit Switched Mode Northbound Traffic Maintenance Remote Management Bottom Section IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface 900 / 1800 MHz GPRS and IP Ethernet GSM SNMP v1, v2c and http 10/100 BaseT Ethernet Port (DHCP managed) and RS232 NWM 3.2.2 and greater; local web interface Door Section N/A N/A N/A N/A N/A N/A N/A

MECHANICAL DATA*
Section RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) Bottom Section N-female 440 x 530 x 280 (1 5x19x11) 37 (82) Door Section N-female N/A N/A

ENVIRONMENTAL DATA*
Section Operating Temperature Farenheit (Celsius) Housing Specification Bottom Section -13 to +131 (-25 to +55) NEMA 4 / IP65 Door Section -13 to +131 (-25 to +55) NEMA 4 / IP65

APPROVALS AND TESTS*


Section Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change. Notes: Performance is affected by the way Donor and Service antenna is configured. *If combined to common antenna, output power decrease 1dB and NF increase 1dB

Bottom Section TS 45.005 EN 301 489-1

Door Section TS 45.005 EN 301 489-1

Updated: 2010-12-06

150

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Band Selective Standard Repeaters

AR3400/01109

STANDARD BAND SELECTIVE REPEATER 1900MHz CDMA LB, BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay CDMA 1850-1890 1930-1970 Band Selective 0.5 to 16.9 MHz +33 dBm Composite +33 dBm Composite 55 to 85 dB 6 dB 6 s

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC NA 200 W

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x195(15x19x8) 22 (48)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

FCC Part 24 FCC Part 24


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-06

151

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Band Selective Standard Repeaters

AR3400/91109

STANDARD BAND SELECTIVE REPEATER 1900MHz CDMA UB, BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay CDMA 1870-1910 1950-1990 Band Selective 0.5 to 16.9 MHz +33 dBm Composite +33 dBm Composite 55 to 85 dB 6 dB 6 s

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC NA 200 W

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x195 (15x19x8) 22 (48)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

FCC Part 24 FCC Part 24


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-06

152

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Band Selective Standard Repeaters

AR3434/51109

STANDARD BAND SELECTIVE REPEATER DUAL CELL 1900MHz CDMA UB,BW16.9MHz/1900MHz CDMA LB,BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay CDMA 1870-1910 (UB) / 1850-1890 (LB) 1950-1990 (UB) / 1930-1970 (LB) Band Selective 0.5 to 16.9 MHz (UB and LB) +30 dBm Composite (combined UB and LB ports) +30 dBm Composite (combined UB and LB ports) 55 to 85 dB 6 dB 6 s

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC NA 400W (2 Separate PSUs)

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x280 (15x19x11) 48[82]

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

FCC Part 24 FCC Part 24


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-06

153

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Band Selective Standard Repeaters

AR4200/01209

STANDARD BAND SELECTIVE REPEATER 850MHz CDMA, BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SW

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay CDMA 824-849 869-894 Band Selective 0.5 to 16.9 MHz +33 dBm Composite +30 dBm Composite 55 to 85 dB 6 dB 6 s

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC NA 200 W

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x195 (15x19x8) 22 (48)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

FCC Part 22 FCC Part 22


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-06

154

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Band Selective Standard Repeaters

AR4600/05309

STANDARD BAND SELECTIVE REP 800MHz SMR/iDEN, BW18MHz, WIRELINE REMOTE CONTROL, DOOR SW

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay SMR/iDEN 806-824 851-869 Broad band 0.5 to 18 MHz +33 dBm Composite +33 dBm Composite 55 to 85 dB 6 dB 6 s

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC NA 200 W

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x195 (15x19x8) 22 (48)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

FCC Part 90 FCC Part 90


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-06

155

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Band Selective Standard Repeaters

AR4640/05309

STANDARD BAND SELECTIVE REP 800MHz SMR/iDEN, HIGH POWER, BW18MHz, WIRELINE REMOTE CONTROL, DOOR SW

ELECTRICAL DATA*
Range Frequency Band UL (MHz) Frequency Band DL (MHz) No. of Channels Bandwidth Output Power DL (min) Output Power UL (min) Gain adjustment range Noise Figure Group Delay SMR/iDEN 806-824 851-869 Broad band 0.5 to 18 MHz +36 dBm Composite +33 dBm Composite 65 to 95 dB 6 dB 6 s

TECHNICAL SPECIFICATIONS*
Power Supply Power Supply (Optional) Power Consumption 115/230 VAC NA 320 W

MECHANICAL DATA*
RF Connection Dimension (WxHxD) mm (ft) Weight kg (lbs) N-female 440x530x280 (15x19x11) 22 (48)

ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius) Housing Specification -13 to +131 (-25 to +55 ) NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio Regulatory Compliance EMC
* All specifications subject to change.

FCC Part 90 FCC Part 90


Note: Values within [ ] is valid for a max configuration

Updated: 2010-12-06

156

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Coverage Products

POWERWAVE

Advanced Train Repeaters

Repeater Products
Frequency Range Up-Link (MHz) 890-915 Frequency Range Down-Link (MHz) 935-960

Title Advanced Train Repeater Module 900 MHz (GSM and UMTS) Advanced Train Repeater Module 900 MHz (GSM and UMTS) Advanced Train Repeater Module 900 MHz (EGSM and UMTS) Advanced Train Repeater Module 900 MHz (GSM and UMTS)

Part Number ATR1200/001xy (GSM 900) ATR1200/002xy (GSM 900) ATR1200/901xy (EGSM 900) ATR1200/902xy (EGSM 900)

Page 158

890-915

935-960

159

880-905

925-950

160

880-905

925-950

161

157

POWERWAVE

Advanced Train Repeaters

ATR1200/001xy (GSM 900)

Advanced Train Repeater Module 900 MHz (GSM and UMTS)

Advanced Train Repeater Module 900MHz (GSM/UMTS), bandwidth 15MHz ELECTRICAL SPECIFICATIONS
Frequency Range Uplink (MHz) Frequency Range Downlink (MHz) Filter Bandwidth Adjustable (MHz) Filter Settling Resolutions (KHz) Gain Range Gain Step Resolution Gain Trail Dynamic Range Gain Trail Tracking Accuracy Output Power Composite (min) Noise Figure 70 dB Gain Maximum Input Power Power Supply Power Consumption 890-915 935-960 0,5-15 25 50-70 dB 1 dB 30 dB 2 dB +23 dBm (UL), +18 dBm (DL) 8 dB +13 dBm 110 - 240 VAC, 110 DC or -24 to -48 VDC < 50 W

MECHANICAL SPECIFICATIONS
Dimensions WxDxH mm (in) Weight kg (lbs) RF Connectors 450 x 420 x 44 (17.7x 16.5 x 1.7) < 3 (6.6) SMA-Type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Humidity Vibration Ingress Protection -25C to +45 C EC 60068-2-56 EN 300 019-1-5 V2, IEC-61373 IP21

APPROVALS AND TESTS


Safety EMC EMC for Railway Application Radio EN/ IEC 60 950 ETS 301 489-1 EN 50155, EN 50121-3-2 ETSI EN 300 609-4

xy: reserved for power supply type and remote control/GPS option. All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

D042-071628

Updated: 2009-11-18

158

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Advanced Train Repeaters

ATR1200/002xy (GSM900)

Advanced Train Repeater Module 900 MHz (GSM and UMTS)

Advanced Train Repeater Module 900MHz (GSM/UMTS), bandwidth 25MHz ELECTRICAL SPECIFICATIONS
Frequency Range Uplink (MHz) Frequency Range Downlink (MHz) Filter Bandwidth Adjustable (MHz) Filter Settling Resolutions (KHz) Gain Range Gain Step Resolution Gain Trail Dynamic Range Gain Trail Tracking Accuracy Output Power Composite (min) Noise Figure 70 dB Gain Maximum Input Power Power Supply Power Consumption 890-915 935-960 0,5-25 25 50-70 dB 1 dB 30 dB 2 dB +23 dBm (UL), +18 dBm (DL) 8 dB +13 dBm 110 - 240 VAC, 110 DC or -24 to -48 VDC < 50 W

MECHANICAL SPECIFICATIONS
Dimensions WxDxH mm (in) Weight kg (lbs) RF Connectors 450 x 420 x 44 (17.7x 16.5 x 1.7) < 3 (6.6) SMA-Type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Humidity Vibration Ingress Protection -25C to +45 C EC 60068-2-56 EN 300 019-1-5 V2, IEC-61373 IP21

APPROVALS AND TESTS


Safety EMC EMC for Railway Application Radio EN/ IEC 60 950 ETS 301 489-1 EN 50155, EN 50121-3-2 ETSI EN 300 609-4

xy: reserved for power supply type and remote control/GPS option. All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08660

Updated: 2010-01-03

159

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Advanced Train Repeaters

ATR1200/901xy (EGSM900)

Advanced Train Repeater Module 900 MHz (EGSM and UMTS)

Advanced Train Repeater Module 900MHz (EGSM/UMTS), bandwidth 15MHz ELECTRICAL SPECIFICATIONS
Frequency Range Uplink (MHz) Frequency Range Downlink (MHz) Filter Bandwidth Adjustable (MHz) Filter Settling Resolutions (KHz) Gain Range Gain Step Resolution Gain Trail Dynamic Range Gain Trail Tracking Accuracy Output Power Composite (min) Noise Figure 70 dB Gain Maximum Input Power Power Supply Power Consumption 880-905 925-950 0,5-15 25 50-70 dB 1 dB 30 dB 2 dB +24 dBm (UL), +18 dBm (DL) 8 dB +13 dBm 110 - 240 VAC, 110 DC or -24 to -48 VDC < 50 W

MECHANICAL SPECIFICATIONS
Dimensions WxDxH mm (in) Weight kg (lbs) RF Connectors 450 x 420 x 44 (17.7x 16.5 x 1.7) < 3 (6.6) SMA-Type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Humidity Vibration Ingress Protection -25C to +45 C EC 60068-2-56 EN 300 019-1-5 V2, IEC-61373 IP21

APPROVALS AND TESTS


Safety EMC EMC for Railway Application Radio EN/ IEC 60 950 ETS 301 489-1 EN 50155, EN 50121-3-2 ETSI EN 300 609-4

xy: reserved for power supply type and remote control/GPS option. All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08661

Updated: 2009-11-18

160

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Advanced Train Repeaters

ATR1200/902xy (EGSM900)

Advanced Train Repeater Module 900 MHz (GSM and UMTS)

Advanced Train Repeater Module 900MHz (EGSM/UMTS), bandwidth 25MHz ELECTRICAL SPECIFICATIONS
Frequency Range Uplink (MHz) Frequency Range Downlink (MHz) Filter Bandwidth Adjustable (MHz) Filter Settling Resolutions (KHz) Gain Range Gain Step Resolution Gain Trail Dynamic Range Gain Trail Tracking Accuracy Output Power Composite (min) Noise Figure 70 dB Gain Maximum Input Power Power Supply Power Consumption 880-905 925-950 0,5-25 25 50-70 dB 1 dB 30 dB 2 dB +24 dBm (UL), +18dBm (DL) 8 dB +13 dBm 110 - 240 VAC, 110 DC or -24 to -48 VDC < 50 W

MECHANICAL SPECIFICATIONS
Dimensions WxDxH mm (in) Weight kg (lbs) RF Connectors 450 x 420 x 44 (17.7x 16.5 x 1.7) < 3 (6.6) SMA-Type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Humidity Vibration Ingress Protection -25C to +45 C EC 60068-2-56 EN 300 019-1-5 V2, IEC-61373 IP21

APPROVALS AND TESTS


Safety EMC EMC for Railway Application Radio EN/ IEC 60 950 ETS 301 489-1 EN 50155, EN 50121-3-2 ETSI EN 300 609-4

xy: reserved for power supply type and remote control/GPS option. All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08662

Updated: 2009-11-18

161

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Coverage Products

POWERWAVE

Digital Repeaters

Repeater Products

Title Nexus RT 850/1900 MHz Dual Band Digital Repeater Nexus RT 850 MHz Digital Repeater Nexus RT 1900 MHz Digital Repeater

Frequency Range (MHz) 824-849

Bandwidth (MHz) 25

Part Number NP50B0-22111

Page 163

824-849

25

NP5O-11111

164

1850-1910

60

NPBO-11111

165

162

POWERWAVE

Digital Repeaters

NP50B0-22111

Nexus RT 850/1900 MHz Dual Band Digital Repeater

ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz) Frequency Range, Downlink (MHz) Instantaneous Bandwidth (MHz) Number of sub-bands Individual sub-band width, selectable (MHz) Total sub-band width (MHz) Gain adjustment range (1 dB steps) Output Power Downlink Output Power Downlink Output Power Uplink Output Power Uplink Noise Figure Feedback Cancellation Alarm Fault Power Supply Options Power Consumption 1.5 2.5 10 11 25 25 55-85 dB +28 dBm composite +28 dBm composite +28 dBm composite +28 dBm composite 6.6 dB (max. gain) >20 dB IP connection or wireless modem 110-120 VAC < 400 W 824 - 849 869-894 25 (850) 1 to 2 (850MHz), 1 to 5 (1900MHz) 2.5 5 7.5 10 15 20 60 1850 -1910 1930 -1990 60 (1900)

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight lbs RF Connectors 381 x 305 x 229(15 x 12 x 9) < 50 N-type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Casing Class -30 C to +50 C IP 50

APPROVALS AND TESTS


Safety Environment EMC Radio EN 60950, ETL ETS 300 019 ETS 301 489-1 FCC Parts 22 and 24

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2009-04-20

163

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Digital Repeaters

NP5O-11111

Nexus RT 850 MHz Digital Repeater

ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz) Frequency Range, Downlink (MHz) Instantaneous Bandwidth (MHz) Number of sub-bands Individual sub-band width, selectable (MHz) Total sub-band width (MHz) Gain adjustment range (1 dB steps) Output Power Downlink Output Power Downlink Output Power Uplink Output Power Uplink Noise Figure Feedback Cancellation Alarm Fault Power Supply Options Power Consumption 824 - 849 869-894 25 1 to 2 1.5 2.5 10 11 25 25 55-85 dB +28 dBm composite +28 dBm composite +28 dBm composite +28 dBm composite 6.6 dB (max. gain) >20 dB IP connection or wireless modem 110-120 VAC < 200 W

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight lbs RF Connectors 381 x 305 x 229(15 x 12 x 9) 40 N-type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Casing Class -30 C to +50 C IP 50

APPROVALS AND TESTS


Safety Environment EMC Radio EN 60950, ETL ETS 300 019 ETS 301 489-1 FCC Part 22

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2009-04-20

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

164

POWERWAVE

Digital Repeaters

NP50B0-22111

Nexus RT 850/1900 MHz Dual Band Digital Repeater

ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz) Frequency Range, Downlink (MHz) Instantaneous Bandwidth (MHz) Number of sub-bands Individual sub-band width, selectable (MHz) Total sub-band width (MHz) Gain adjustment range (1 dB steps) Output Power Downlink Output Power Downlink Output Power Uplink Output Power Uplink Noise Figure Feedback Cancellation Alarm Fault Power Supply Options Power Consumption 1.5 2.5 10 11 25 25 55-85 dB +28 dBm composite +28 dBm composite +28 dBm composite +28 dBm composite 6.6 dB (max. gain) >20 dB IP connection or wireless modem 110-120 VAC < 400 W 824 - 849 869-894 25 (850) 1 to 2 (850MHz), 1 to 5 (1900MHz) 2.5 5 7.5 10 15 20 60 1850 -1910 1930 -1990 60 (1900)

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight lbs RF Connectors 381 x 305 x 229(15 x 12 x 9) < 50 N-type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Casing Class -30 C to +50 C IP 50

APPROVALS AND TESTS


Safety Environment EMC Radio EN 60950, ETL ETS 300 019 ETS 301 489-1 FCC Parts 22 and 24

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2009-04-20

165

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

In-Building and Outdoor DAS Products

Power wave

Turnkey Projects
We deliver complete turnkey solutions for wireless coverage. We manage the entire project with full responsibility, starting with analyzing and determining required signal strength, quality and planning for future expansion, right through implementation and operations. All Powerwave turnkey systems are backed by full performance guarantees, with full product and component warranties for your peace of mind.

Public Safety Networks Commercial

Powerwave Products
As new wireless services, technologies and opportunities emerge, the ability to rapidly adapt will become even more vital to network operators, building owners and public safety agencies. Thats why Powerwave engineers flexibility into every system. Its why we choose components that are modular and adaptable. And its why our coverage solutions are built from the ground up to be versatile.

Coverage Products

POWERWAVE

Bi-Directional Amplifiers

In-Building and Outdoor DAS Products


Public Safety Networks

Title

Frequency Range (MHz)

Gain Range 28-70 dB, 28-40 dB (SB400-F2L & SB400-F4L) 28-70 dB, 28-40 dB (SB400-F2L & SB400-F4L)

Part Number SB400-A

Page 168

In-Hancer Plus Series 380-430 Bi-Directional Amplifier In-Hancer Plus Series 450-512 Bi-Directional Amplifier

SB400-B

169

167

POWERWAVE

Bi-Directional Amplifiers

SB400-A

In-Hancer Plus Series Bi-Directional Amplifier

Servicing UHF, the In-Hancer Plus Series includes reliable and cost-effective Bi-Directional Amplifiers (BDAs) designed to extend UHF coverage* into enclosed environments experiencing coverage deficiency such as inside buildings, tunnels and garages. MODULE SPECIFICATIONS
Frequency Range (MHz) Passband Ripple Digital Gain Adjustment AGC Dynamic Range Gain Range ID 3rd Order Intercept Point IP3 Noise Figure Propagation Delay Input Impedance VSWR Maximum RF Input Primary Power 380-430 2.5 dB In 1 dB Increments 25 dB 28-70 dB, 28-40 dB (SB400-F2L & SB400-F4L) +44 dBm <12 dB <1 s 50 O <2:1 +10 dBm 120/240 VAC, 50-60 Hz 100 VA, 150 VA Max

MECHANICAL CHARACTERISTICS
Dimensions HxWxD in (mm) Weight (lbs) Operating Temperature Range (Celsius) Enclosure 26.28 x 24 x 12.25 120 lbs. approx -10C to +50 Painted Steel - Wall Mount (Stainless Steel upgrade available)

ACCEPTANCE TYPE
FCC Type Acceptance IC Type Acceptance H6M-SB400 541A-SB400

Filtering Options
SB400-F1 SB400-F5 SB400-F2L SB400-F2H1 SB400-F3 SB400-F4L SB400-F4H1 SB400-F2H2 SB400-F4H2 SB400-F2H3 SB400-F4H3

*Range
380-430 MHz 380-430 MHz 403-430 MHz 403-430 MHz 403-430 MHz 403-430 MHz 403-430 MHz NA NA NA NA

* Passband Bandwidth
1.0 MHz 5.0 MHz 1.5 MHz 1.5 MHz 1.5 MHz 3.0 MHz 3.0 MHz 1.5 MHz 3.0 MHz 1.5 MHz 3.0 MHz

Tx to Rx Separation
5.0 MHz 10.0 MHz 3.0 MHz 3.0 MHz 5.0 MHz 5.0 MHz 5.0 MHz 3.0 MHz 5.0 MHz 3.0 MHz 5.0 MHz

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated 01/13/2010

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

168

POWERWAVE

Bi-Directional Amplifiers

SB400-B

In-Hancer Plus Series Bi-Directional Amplifier

Servicing UHF, the In-Hancer Plus Series includes reliable and cost-effective Bi-Directional Amplifiers (BDAs) designed to extend UHF coverage* into enclosed environments experiencing coverage deficiency such as inside buildings, tunnels and garages. MODULE SPECIFICATIONS
Frequency Range (MHz) Passband Ripple Digital Gain Adjustment AGC Dynamic Range Gain Range ID 3rd Order Intercept Point IP3 Noise Figure Propagation Delay Input Impedance VSWR Maximum RF Input Primary Power 450-512 2.5 dB In 1 dB Increments 25 dB 28-70 dB, 28-40 dB (SB400-F2L & SB400-F4L) +44 dBm <12 dB <1 s 50 O <2:1 +10 dBm 120/240 VAC, 50-60 Hz 100 VA, 150 VA Max

MECHANICAL CHARACTERISTICS
Dimensions HxWxD in (mm) Weight (lbs) Operating Temperature Range (Celsius) Enclosure 26.28 x 24 x 12.25 120 lbs. approx -10C to +50 Painted Steel - Wall Mount (Stainless Steel upgrade available)

ACCEPTANCE TYPE
FCC Type Acceptance IC Type Acceptance H6M-SB400 541A-SB400

Filtering Options
SB400-F1 SB400-F5 SB400-F2L SB400-F2H1 SB400-F3 SB400-F4L SB400-F4H1 SB400-F2H2 SB400-F4H2 SB400-F2H3 SB400-F4H3

*Range
450-512 MHz 450-512 MHz 450-512 MHz NA 450-512 MHz 450-512 MHz NA 450-4 70 MHz 450-4 70 MHz 470-512 MHz 470-512 MHz

* Passband Bandwidth
1.0 MHz 5.0 MHz 1.5 MHz 1.5 MHz 1.5 MHz 3.0 MHz 3.0 MHz 1.5 MHz 3.0 MHz 1.5 MHz 3.0 MHz

Tx to Rx Separation
5.0 MHz 10.0 MHz 3.0 MHz 3.0 MHz 5.0 MHz 5.0 MHz 5.0 MHz 3.0 MHz 5.0 MHz 3.0 MHz 5.0 MHz

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated 01/13/2010

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

169

Coverage Products

POWERWAVE

LinkNet Convergence Platform

In-Building and Outdoor DAS Products


Public Safety Networks

Title LNKA800 Amplifier

Frequency Range (MHz) Bandwidth 806-940 Broadband Amplifier

Part Number LNKA800

Page 171

LNKF400

406.125-430, 450-512

Narrowband FM 12.5 or 25 KHz 0.25 MHz, 1.25 MHz, 5 MHz, 15 MHz

LNKF400

172

LNKC1900 Banded Repeater

N/A

LNKC1900

173

LNKA900

890-960

Broadband Amplifier

LNKA900

174

LNKC1800 Banded Repeater

N/A

0.25 MHz, 1.25 MHz, 5 MHz, 15 MHz Narrowband FM 12.5 or 25 KHz Narrowband FM 12.5 or 25 KHz

LNKC1800

175

LNKF100

136-157, 155174

LNKF100

176

LNKF800

806-824,851-869, 896-901,935-940

LNKF800

177

170

POWERWAVE

LinkNet Convergence Platform

LNKA800

LNKA800 Amplifier

MODULE SPECIFICATIONS
Frequency Range (MHz) Downlink Frequency Range (MHz) Uplink Frequency Range (MHz) Bandwidth RF Gain Adjustment Range AGC Control Adjustment Range RF Frequency Stability Maximum RF Output Power RF Output Power Range RF Output Power Variation Output Power 1 Output Power 2 Output Power 3 Input Dynamic Range Input Sensitivity Adjust Range Input Hysteresis Adjacent Channel Sensitivity ID 3rd Order Intercept Point IP3 Noise Figure Transmit Duty Cycle Transmit Spurious Receive Conducted Spurious Group Delay Audio Distortion and Noise Power Supply Module Requirements RF Connectors Connections Front Panel Indicators Configuration Options 806-940 NA NA Broadband Amplifier +34 dB to +84 dB, in 1 dB increments +15 dBm to +30 dBm NA NA NA NA NA NA NA NA NA NA NA +47 dBm Typical <8 dB, 5 dB Typical Continuous -13 dBm Maximum -57 dBm Maximum <200 nS NA 40Watts Maximum SMA (50 O) Connectors on back of Chassis DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection. Operating, Stand By, Fault, Program Mode

MECHANICAL CHARACTERISTICS
Dimensions HxWxD in (mm) Weight (lbs) Operating Temperature Range (Celsius) Operating Humidity Range 2" x 9.11" x 14" (51 x 231.4 x 355.6) 10 -10C to +50 10 to 90% RH, Non-Condensing

ACCEPTANCE TYPE
FCC Type Acceptance IC Type Acceptance H6M-LNKA800 1541311246A

* Module Family
LNKA800-A LNKA800-B LNKA800-C LNKA800-D LNKA800-E LNKA800-F NA NA

Type
Broadband Amplifier Broadband Amplifier Broadband Amplifier Broadband Amplifier Broadband Amplifier Broadband Amplifier NA NA

Frequency
806-824 MHz 851-869 MHz 824-849 MHz 869-894 MHz 896-902 MHz 928-940 MHz NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

#Error

Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

171

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

LinkNet Convergence Platform

LNKF400

LNKF400

MODULE SPECIFICATIONS
Frequency Range (MHz) Downlink Frequency Range (MHz) Uplink Frequency Range (MHz) Bandwidth RF Gain Adjustment Range AGC Control Adjustment Range RF Frequency Stability Maximum RF Output Power RF Output Power Range RF Output Power Variation Output Power 1 Output Power 2 Output Power 3 Input Dynamic Range Input Sensitivity Adjust Range Input Hysteresis Adjacent Channel Sensitivity ID 3rd Order Intercept Point IP3 Noise Figure Transmit Duty Cycle Transmit Spurious Receive Conducted Spurious Group Delay Audio Distortion and Noise Power Supply Module Requirements RF Connectors Connections Front Panel Indicators Configuration Options 406.125 - 430, 450 - 512 MHz NA NA Narrowband FM 12.5 or 25 KHz NA NA Tracks input signal exactly +37 dBm +17 dBm to +37 dBm +/- 1 dB NA NA NA -110 dBm to -30 dBml -110 dBm to -50 dBm 1 dB to 10 dB 60 dB minimum for 25 KHz modules, 55 dB for 12.5 Khz modules NA NA Continuous -13 dBm max for 25 KHz modules, -20 dBm max for 12.5 KHz modules -57 dBm Maximum <120 microsecs for 25 KHz modules, <160 microsecs for 12.5 KHz modules <4% increase for 25 KHz modules, <5% increase for 12.5 KHz modules 45 Watts Maximum SMA (50 O) Connectors on back of Chassis DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection. Operating, Stand By, Fault, Program Mode, Receive, Transmit

MECHANICAL CHARACTERISTICS
Dimensions HxWxD in (mm) Weight (lbs) Operating Temperature Range (Celsius) Operating Humidity Range 2" x 9.11" x 14" (51 x 231.4 x 355.6) 10 -10C to +50 10 to 90% RH, Non-Condensing

ACCEPTANCE TYPE
FCC Type Acceptance IC Type Acceptance H6M-OFR400-A, H6M-OFR400 1541195680A

* Module Family
LNKF400-A1 LNKF400-A2 LNKF400-C1 LNKF400-C2 LNKF400-D1 LNKF400-D2 LNKF400-E1 LNKF400-E2

Type
25 KHz FM channels 12.5 KHz FM channels 25 KHz FM channels 12.5 KHz FM channels 25 KHz FM channels 12.5 KHz FM channels 25 KHz FM channels 12.5 KHz FM channels

Frequency
406.125-430 MHz 406.125-430 MHz 450-470 MHz 450-470 MHz 470-490 MHz 470-490 MHz 490-512 MHz 490-512 MHz

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

#Error

Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

172

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

LinkNet Convergence Platform

LNKC1900

LNKC1900 Banded Repeater

MODULE SPECIFICATIONS
Frequency Range (MHz) Downlink Frequency Range (MHz) Uplink Frequency Range (MHz) Bandwidth RF Gain Adjustment Range AGC Control Adjustment Range RF Frequency Stability Maximum RF Output Power RF Output Power Range RF Output Power Variation Output Power 1 Output Power 2 Output Power 3 Input Dynamic Range Input Sensitivity Adjust Range Input Hysteresis Adjacent Channel Sensitivity ID 3rd Order Intercept Point IP3 Noise Figure Transmit Duty Cycle Transmit Spurious Receive Conducted Spurious Group Delay Audio Distortion and Noise Power Supply Module Requirements RF Connectors Connections Front Panel Indicators Configuration Options NA 1850-1910, 1930-1990 NA 0.25 MHz, 1.25 MHz, 5 MHz, 15 MHz +65 dB to +95 dB, in 1 dB increments NA Tracks input signal exactly NA NA NA 1 Carrier: +27 dBm 2 Carrier: +23 dBm each 3 Carrier: +21 dBm each NA NA NA NA +44 dBm <6 dB Continuous -13 dBm Maximum -57 dBm Maximum <5 s for 0.25 MHz or 1.25 MHz Models, <3 s for 5 MHz or 15 MHz Models NA 40Watts Maximum SMA (50 O) Connectors on back of Chassis DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection. Operating, Stand By, Fault, Program Mode

MECHANICAL CHARACTERISTICS
Dimensions HxWxD in (mm) Weight (lbs) Operating Temperature Range (Celsius) Operating Humidity Range 2" x 9.11" x 14" (51 x 231.4 x 355.6) 10 -10C to +50 10 to 90% RH, Non-Condensing

ACCEPTANCE TYPE
FCC Type Acceptance IC Type Acceptance H6M-LNKC1900 1541311242A

* Module Family
LNKC1900-D.2 LNKC1900-D LNKC1900-D5 LNKC1900-D15 LNKC1900-U.2 LNKC1900-U LNKC1900-U5 LNKC1900-U15

Type
Downlink 0.25 MHz Bandwidth Downlink 1.25 MHz Bandwidth Downlink 5 MHz Bandwidth Downlink 15 MHz Bandwidth Uplink 0.25 MHz Band Uplink 1.25 MHz Bandwidth Uplink 5 MHz Bandwidth Uplink 15 MHz Bandwidth

Frequency
1930-1990 MHz 1930-1990 MHz 1930-1990 MHz 1930-1990 MHz 1850-1910 MHz 1850-1910 MHz 1850-1910 MHz 1850-1910 MHz

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

#Error

Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

173

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

LinkNet Convergence Platform

LNKA900

LNKA900

MODULE SPECIFICATIONS
Frequency Range (MHz) Downlink Frequency Range (MHz) Uplink Frequency Range (MHz) Bandwidth RF Gain Adjustment Range AGC Control Adjustment Range RF Frequency Stability Maximum RF Output Power RF Output Power Range RF Output Power Variation Output Power 1 Output Power 2 Output Power 3 Input Dynamic Range Input Sensitivity Adjust Range Input Hysteresis Adjacent Channel Sensitivity ID 3rd Order Intercept Point IP3 Noise Figure Transmit Duty Cycle Transmit Spurious Receive Conducted Spurious Group Delay Audio Distortion and Noise Power Supply Module Requirements RF Connectors Connections Front Panel Indicators Configuration Options 890-960 NA NA Broadband Amplifier +34 dB to +84 dB, in 1 dB increments +15 dBm to +30 dBm NA NA NA NA NA NA NA NA NA NA NA +47 dBm Typical <8 dB, 5 dB Typical Continuous -13 dBm Maximum -57 dBm Maximum <200 nS NA 40Watts Maximum SMA (50 O) Connectors on back of Chassis DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection. Operating, Stand By, Fault, Program Mode

MECHANICAL CHARACTERISTICS
Dimensions HxWxD in (mm) Weight (lbs) Operating Temperature Range (Celsius) Operating Humidity Range 2" x 9.11" x 14" (51 x 231.4 x 355.6) 10 -10C to +50 10 to 90% RH, Non-Condensing

ACCEPTANCE TYPE
FCC Type Acceptance IC Type Acceptance NA NA

* Module Family
LNKA900-A LNKA9800-B NA NA NA NA NA NA

Type
Broadband Amplifier Broadband Amplifier NA NA NA NA NA NA

Frequency
890-915 MHz 935-960 MHz NA NA NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

#Error

Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

174

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

LinkNet Convergence Platform

LNKC1800

LNKC1800 Banded Repeater

MODULE SPECIFICATIONS
Frequency Range (MHz) Downlink Frequency Range (MHz) Uplink Frequency Range (MHz) Bandwidth RF Gain Adjustment Range AGC Control Adjustment Range RF Frequency Stability Maximum RF Output Power RF Output Power Range RF Output Power Variation Output Power 1 Output Power 2 Output Power 3 Input Dynamic Range Input Sensitivity Adjust Range Input Hysteresis Adjacent Channel Sensitivity ID 3rd Order Intercept Point IP3 Noise Figure Transmit Duty Cycle Transmit Spurious Receive Conducted Spurious Group Delay Audio Distortion and Noise Power Supply Module Requirements RF Connectors Connections Front Panel Indicators Configuration Options NA 1805-1880 1710-1785 0.25 MHz, 1.25 MHz, 5 MHz, 15 MHz +65 dB to +95 dB, in 1 dB increments NA Tracks input signal exactly NA NA NA NA NA NA NA NA NA NA +44 dBm <6 dB Continuous -13 dBm Maximum -57 dBm Maximum <5 s for 0.25 MHz or 1.25 MHz Models, <3 s for 5 MHz or 15 MHz Models NA 40Watts Maximum SMA (50 O) Connectors on back of Chassis DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection. Operating, Stand By, Fault, Program Mode

MECHANICAL CHARACTERISTICS
Dimensions HxWxD in (mm) Weight (lbs) Operating Temperature Range (Celsius) Operating Humidity Range 2" x 9.11" x 14" (51 x 231.4 x 355.6) 10 -10C to +50 10 to 90% RH, Non-Condensing

ACCEPTANCE TYPE
FCC Type Acceptance IC Type Acceptance NA NA

* Module Family
LNKC1800-D.2 LNKC1800-D LNKC1800-D5 LNKC1800-D15 LNKC1800-U.2 LNKC1800-U LNKC1800-U5 LNKC1800-U15

Type
Downlink 0.25 MHz Bandwidth Downlink 1.25 MHz Bandwidth Downlink 5 MHz Bandwidth Downlink 15 MHz Bandwidth Uplink 0.25 MHz Bandwidth Uplink 1.25 MHz Bandwidth Uplink 5 MHz Bandwidth Uplink 15 MHz Bandwidth

Frequency
1805-1880 MHz 1805-1880 MHz 1805-1880 MHz 1805-1880 MHz 1710-1785 MHz 1710-1785 MHz 1710-1785 MHz 1710-1785 MHz

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

#Error

Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

175

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

LinkNet Convergence Platform

LNKF100

LNKF100

MODULE SPECIFICATIONS
Frequency Range (MHz) Downlink Frequency Range (MHz) Uplink Frequency Range (MHz) Bandwidth RF Gain Adjustment Range AGC Control Adjustment Range RF Frequency Stability Maximum RF Output Power RF Output Power Range RF Output Power Variation Output Power 1 Output Power 2 Output Power 3 Input Dynamic Range Input Sensitivity Adjust Range Input Hysteresis Adjacent Channel Sensitivity ID 3rd Order Intercept Point IP3 Noise Figure Transmit Duty Cycle Transmit Spurious Receive Conducted Spurious Group Delay Audio Distortion and Noise Power Supply Module Requirements RF Connectors Connections Front Panel Indicators Configuration Options 136 - 157, 155 - 174 NA NA Narrowband FM 12.5 or 25 KHz NA NA NA +37 dBm +20 dBm to +37 dBm +/- 1 dB NA NA NA -110 dBm to -30 dBml -110 dBm to -50 dBm 1 dB to 10 dB 60 dB minimum for 25 KHz modules, 55 dB for 12.5 Khz modules NA NA Continuous -13 dBm max for 25 KHz modules, -20 dBm max for 12.5 KHz modules -57 dBm Maximum <120 microsecs for 25 KHz modules, <160 microsecs for 12.5 KHz modules <4% increase for 25 KHz modules, <5% increase for 12.5 KHz modules 45 Watts Maximum SMA (50 O) Connectors on back of Chassis DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection. Operating, Stand By, Fault, Program Mode, Receive, Transmit

MECHANICAL CHARACTERISTICS
Dimensions HxWxD in (mm) Weight (lbs) Operating Temperature Range (Celsius) Operating Humidity Range 2" x 9.11" x 14" (51 x 231.4 x 355.6) 10 -10C to +50 10 to 90% RH, Non-Condensing

ACCEPTANCE TYPE
FCC Type Acceptance IC Type Acceptance NA NA

* Module Family
LNKF100-A1 LNKF100-A2 LNKF100-B1 LNKF100-B2 NA NA NA NA

Type
25 KHz FM channels 12.5 KHz FM channels 25 KHz FM channels 12.5 KHz FM channels NA NA NA NA

Frequency
136-157 MHz 136-157 MHz 155-174 MHz 155-174 MHz NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

#Error

Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

176

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

LinkNet Convergence Platform

LNKF800

LNKF800

MODULE SPECIFICATIONS
Frequency Range (MHz) Downlink Frequency Range (MHz) Uplink Frequency Range (MHz) Bandwidth RF Gain Adjustment Range AGC Control Adjustment Range RF Frequency Stability Maximum RF Output Power RF Output Power Range RF Output Power Variation Output Power 1 Output Power 2 Output Power 3 Input Dynamic Range Input Sensitivity Adjust Range Input Hysteresis Adjacent Channel Sensitivity ID 3rd Order Intercept Point IP3 Noise Figure Transmit Duty Cycle Transmit Spurious Receive Conducted Spurious Group Delay Audio Distortion and Noise Power Supply Module Requirements RF Connectors Connections Front Panel Indicators Configuration Options Continuous -13 dBm max for 25 KHz modules, -20 dBm max for 12.5 KHz modules -57 dBm Maximum <120 microsecs for 25 KHz modules, <160 microsecs for 12.5 KHz modules <4% increase for 25 KHz modules, <5% increase for 12.5 KHz modules 45 Watts Maximum SMA (50 O) Connectors on back of Chassis DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and RS-232 connection. Operating, Stand By, Fault, Program Mode, Receive, Transmit -110 dBm to -30 dBml -110 dBm to -50 dBm 1 dB to 10 dB 60 dB minimum for 25 KHz modules, 55 dB for 12.5 Khz modules 806-824,851-869,896-901,935-940 NA NA Narrowband FM 12.5 or 25 KHz NA NA Tracks input signal exactly +38 dBm (+37 dBm for G2, H2 models) +17 dBm to +38 dBm (+37 dBm) +/- 1 dB

MECHANICAL CHARACTERISTICS
Dimensions HxWxD in (mm) Weight (lbs) Operating Temperature Range (Celsius) Operating Humidity Range 2" x 9.11" x 14" (51 x 231.4 x 355.6) 10 -10C to +50 10 to 90% RH, Non-Condensing

ACCEPTANCE TYPE
FCC Type Acceptance IC Type Acceptance H6M-OFR800, H6M-LNKF800 1541195685A, 1541196848A

* Module Family
LNKF800-A1 LNKF800-B1 LNKF800-C2 LNKF800-D2 LNKF800-G2 LNKF800-H2 NA NA

Type
25 KHz FM channels 25 KHz FM channels 12.5 KHz FM channels 12.5 KHz FM channels 12.5 KHz FM channels 12.5 KHz FM channels NA NA

Frequency
806-824 MHz 851-869 MHz 806-824 MHz 851-869 MHz 896-901 MHz 935-940 MHz NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

#Error

Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

177

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Optical and RF Conversion Modules

Optical and RF Conversion Modules

Powerwave Technologies, Inc.

When distributing wireless signals over large coverage areas or remote locations, a traditional coaxial based distribution approach may pose problems. This is due to the increase in RF signal loss over large distances, the length in which coaxial cable can be used and extensive equipment required on site to deliver balanced coverage. Our Optical Conversion Modules and RF Conversion/Point of Interconnect Modules are a solution to these problems. Used in both In-Building and Outdoor DAS, Optical Conversion Modules and RF Conversion/Point of Interconnect Modules leverage the inherent attributes of fiber optic technology, such as low attenuation and noise, and provide extensive reach to deliver superior signal quality while reducing infrastructure and site development costs. Optical Conversion Module (OCM) Resides in a 19" rack unit for in-building applications Simplex in/output 1310nm and/or 1550nm Wave Division Multiplexing (WDM) 0 to 20 dB TX and RX attenuation Settable alarm levels 1 to 12 remotes from a single OCM (up to 3 fiber optic nodes in a single OCM) RF Conversion Module/Point of Interconnect Passive wide-band element, "mini" filters/splitters/combiners +40dBm max RF input Sectorization - POI Independent carrier needs

178

Coverage Products

POWERWAVE

Tap-In Signal Distribution Taps

In-Building and Outdoor DAS Products


Public Safety Networks

Title Tap-In Signal Distribution Taps

Part Number Tap-In

Page 180

179

POWERWAVE

Tap-In Signal Distribution Taps

Tap-In

1/2 Taps for Frequencies 100 MHz 520 MHz

1/2" Taps for Frequencies 100 MHz 520 MHz


Model Number Nominal Coupling Loss Insertion Loss @ 150 MHz Line Input Power FCT5-12 12 dB 0.7 dB 15 W FCT5-16 16 dB 0.5 dB 15 W FCT5-20 20 dB 0.3 dB 15 W

5/8" Taps for Frequencies 100 MHz 520 MHz


Model Number Nominal Coupling Loss Insertion Loss @ 150 MHz Line Input Power FCT5-12 12 dB 0.7 dB 15 W FCT7-16 16 dB 0.5 dB 15 W FCT7-20 20 dB 0.3 dB 15 W

1/2" Taps for Frequencies 300 MHz 1000 MHz


Model Number Nominal Coupling Loss Insertion Loss @ 450 MHz Line Input Power CCT5-12 12 dB 0.5 dB 15 W CCT5-16 16 dB 0.5 dB 45 W CCT5-20 20 dB 0.3 dB 90 W

5/8" Taps for Frequencies 300 MHz 1000 MHz


Model Number Nominal Coupling Loss Insertion Loss @ 450 MHz Line Input Power CCT7-12 12 dB 0.8 dB 15 W CCT7-16 16 dB 0.5 dB 45 W CCT7-20 20 dB 0.3 dB 90 W

1/2" Taps for Frequencies 800 MHz 2000 MHz


Model Number Nominal Coupling Loss Insertion Loss @ 1.9 GHz Line Input Power PCT5-12 12 dB 0.8 dB 15 W PCT5-16 16 dB 0.5 dB 45 W

5/8" Taps for Frequencies 800 MHz 2000 MHz


Model Number Nominal Coupling Loss Insertion Loss @ 1.9 GHz Line Input Power PCT7-12 12 dB 0.8 dB 15 W PCT7-16 16 dB 0.5 dB 45 W

TAP-IN GENERAL SPECIFICATIONS


RF Output Impedance Dimensions, WxHxD (in) Output Connector Output Power (Maximum) 50 O 2 x 2 x 1.5 TNC Female 1W

EXACT TAP-IN DIAMETER MEASUREMENT


Tap In Diameter in (mm) 1/2" Taps Tap In Diameter in (mm) 5/8" Taps 0.58 (14.73) 0.83 (21)

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-02

180

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Coverage Products

POWERWAVE

Nexus FT Public Safety

In-Building and Outdoor DAS Products


Commercial Frequency Band (UL) PS: 788 to 805 MHz (includes upper D block) Frequency Band Gain Adjustment (DL) Range DL PS: 758 to 775 MHz (includes upper D block)

Title Nexus FT Single Band 700MHz for Public Safety (PS) and D block

Part Number

Page

45 - 70 dB

RH700030/101

182

181

POWERWAVE

Nexus FT- Public Safety

RH700030/101

Nexus FT Single Band 700MHz for Public Safety (PS) and D block

Nexus FT 700 MHz Public Safety 20W, AC Pwr,WDM Fiber donor port
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption PS: 788 to 805 MHz (includes upper D block) PS: 758 to 775 MHz (includes upper D block) 10 dBo 45 - 70 dB 35 - 60 dB 1dB 43 dBm (758 to 773 MHz), 40 dBm (773 to 775 MHz) 17 MHz -13 dBm -13 dBm LED/SNMP 110 - 230 VAC 210 W typical, 250 W Max

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465x530x195 (18 x 20.9 x 8.3) 23 kg (50.7 lbs) 7/16 DIN Female FC-APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin -25C to +55C IP-65 (NEMA4)

APPROVALS AND TESTS


Safety Radio Environment EMC UL60950-1 FCC CFR47 Parts 15,27,90 GR-36-CORE FCC CFR47 Part 15, 27

*Carrier Count
2 4 8 12

Power Per Carrier


40dBm 37dBm 34dBm 31dBm

Composite Power
43dBm 43dBm 43dBm 43dBm

NA
NA NA NA NA

NA
NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-02

182

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Coverage Products

POWERWAVE

Wide Band Radio Heads

In-Building and Outdoor DAS Products


Commercial

Title

Dimension_HxWXD_mm_(ft)

Weight kg (lbs) <37 (82)

Part Number RH004000/003 RH621010

Page 184 185

Door Upgrade, Wide Band 440 x 530 x 195 (15x19x8) Radio Head (WRH) Triple Band 900/1800/2100HP

440 x 530 x 280 (1 5x19x11) <37 (82)

183

POWERWAVE

Wide Band Radio Heads

RH004000/003
ELECTRICAL DATA*
Frequency UL Band 1 (MHz) Frequency DL Band 1 (MHz) Frequency UL Band 2 (MHz) Frequency DL Band 2 (MHz) Frequency UL Band 3 (MHz) Frequency DL Band 3 (MHz) Frequency UL Band 4 (MHz) Frequency DL Band 4 (MHz) Gain Adjustment Range Gain Step Resolution Max Absolute Delay Max Input Power in UL Output Power DL, band 1, 4 carrier Output Power DL, band 1, 8 carrier Output Power DL, band 1, 16 carrier Output Power DL, band 2, 4 carrier Output Power DL, band 2, 8 carrier Output Power DL, band 3, 4 carrier Output Power DL, band 3, 8 carrier Output Power DL, band 4, 4 carrier Output Power DL, band 4, 8 carrier Noise Figure (excluding fiber) Intermodulation band 1 Intermodulation band 2 Intermodulation band 3 Intermodulation band 4

Door Upgrade, Wide Band Radio Head (WRH) single band 850MHz, for upgrade of single band 2W 1900MHz WRH base
N/A (base) N/A (base) 824-849 869-894 N/A N/A N/A N/A (1dBsteps), 30 dB 1 dB <300 ns +13 dBm damaging level N/A N/A N/A 4CDMA, 26dBm 8 CDMA, 23dBm N/A N/A N/A N/A 4 dB N/A N/A N/A N/A

MISCELLANEOUS SPECIFICATIONS*
Alarm Power Supply Power Consumption Fault, LED and by remote control 115/230 VAC <110 W

MECHANICAL DATA*
Dimension (WxHxD) mm (ft) Weight kg (lbs) RF Connection 440 x 530 x 195 (15x19x8) <22.5 (82) N-type female, duplexed service port,

ENVIRONMENTAL DATA*
Operating Temperature Celsius Housing Specification Ingression Protection -25 to +55 NEMA 4 / IP65 N/A

APPROVALS AND TESTS*


Safety Environment Regulatory Compliance EMC Regulatory Compliance Radio EN 60950, ETL, ETS 300 019-2.4E EN301 489-1 FCC Part 24, 22

* All specifications subject to change. Note: Performance is affected by the way Donor and Service antenna is configured (any combination of separate or combined connection can be ordered)

Updated: 2010-05-04

184

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Wide Band Radio Heads

RH621010
ELECTRICAL DATA*
Frequency UL Band 1 (MHz) Frequency DL Band 1 (MHz) Frequency UL Band 2 (MHz) Frequency DL Band 2 (MHz) Frequency UL Band 3 (MHz) Frequency DL Band 3 (MHz) Frequency UL Band 4 (MHz) Frequency DL Band 4 (MHz) Gain Adjustment Range Gain Step Resolution Max Absolute Delay Max Input Power in UL Output Power DL, band 1, 4 carrier Output Power DL, band 1, 8 carrier Output Power DL, band 2, 4 carrier Output Power DL, band 2, 8 carrier Output Power DL, band 3, 4 carrier Output Power DL, band 3, 8 carrier Output Power DL, band 4, 4 carrier Output Power DL, band 4, 8 carrier Noise Figure (excluding fiber) Intermodulation band 1 Intermodulation band 2 Intermodulation band 3 Intermodulation band 4

Triple Band 900/1800/2100HP

GSM 900, 890-915 GSM 900, 935-960 GSM 1800, 1710-1785 GSM1800, 1805-1880 UMTS, 1920-1980 UMTS 2110-2170 N/A N/A (1dBsteps), 30 dB 2 dB <300 ns +13 dBm damaging level 21dBm/carrier 18 dBm/carrier 23 dBm/carrier 20 dBm/carrier 30 dBm/carrier 27 dBm/carrier N/A N/A GSM900 4 dB, GSM1800 4 dB, UMTS2100 4.5 dB GSM 900, -36 dBm GSM 1800, -30 dBm N/A N/A

MISCELLANEOUS SPECIFICATIONS*
Alarm Power Supply Power Consumption Fault, LED and by remote control 115/230 VAC or 24/48 VDC <425 W

MECHANICAL DATA*
Dimension (WxHxD) mm (ft) Weight kg (lbs) RF Connection 440 x 530 x 280 (1 5x19x11) <37 (82) N-type female or 7/16

ENVIRONMENTAL DATA*
Operating Temperature Celsius Housing Specification Ingression Protection -25 to +55 NEMA 4 / IP67 Lock

APPROVALS AND TESTS*


Safety Environment Regulatory Compliance EMC Regulatory Compliance Radio EN 60950, ETL, ETS 300 019 EN301 489-1, TS125 113 ETS300 609-4, TS125 143

* All specifications subject to change. Note: Performance is affected by the way Donor and Service antenna is configured (any combination of separate or combined connection can be ordered)

Updated: 2009-03-16

185

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Coverage Products

POWERWAVE

Nexus FT Single and Dual Band

In-Building and Outdoor DAS Products


Commercial Frequency Band (UL) 824 - 849 MHz Frequency Band (DL) 869 - 894 MHz Gain Adjustment Range DL 25 dB (45 - 70 dB)

Title Nexus FT Cover Upgrade 850 MHz Single Band Nexus FT Single Band EGSM900 Nexus FT Single Band EGSM900 Nexus FT Single Band DCS1800 Nexus FT Single Band DCS1800

Part Number RH004002/001

Page 189

880-915 MHz

925-960 MHz

20 dB (45 65 dB)

RH100020/101

190

880-915 MHz

925-960 MHz

20 dB (45 65 dB)

RH100020/211

191

1710-1785 MHz 1805-1880 MHz

20 dB (45 65 dB)

RH200020/101

192

1710-1785 MHz 1805-1880 MHz

20 dB (45 65 dB)

RH200020/211

193

Nexus FT Dual Band 1710-1785, 880- 1805-1880, 92520 dB (45 65 dB) 1800/900 915 MHz 960 MHz Nexus FT Dual Band 1710-1785, 880- 1805-1880, 92520 dB (45 65 dB) 1800/900 915 MHz 960 MHz Nexus FT 1900 MHz 1850 1910 MHz Single Band Nexus FT 1900 MHz 1850 1910 MHz Single Band 1930 - 1990 MHz 1930 - 1990 MHz 25 dB (45 70 dB)

RH201022/101

194

RH201022/211

195

RH300020/101

196

25 dB (45 70 dB)

RH300020/211

197

Nexus FT Dual Band 1850-1910, 824- 1930-1990, 86925 dB (45 70 dB) PCS/Cellular 849 MHz 894 MHz Nexus FT Dual Band 1850-1910, 824- 1930-1990, 86925 dB (45 70 dB) PCS/Cellular 849 MHz 894 MHz Nexus FT Dual Band 1850-1910, 1710- 1930-1990, PCS/AWS 1755 MHz 2110-2155 MHz Nexus FT Dual Band 1850-1910, 1710- 1930-1990, PCS/AWS 1755 MHz 2110-2155 MHz 25 dB (45 70 dB)

RH304022/101

198

RH304022/211

199

RH309022/101

200

25 dB (45 70 dB)

RH309022/211

201

186

Coverage Products

POWERWAVE

Nexus FT Single and Dual Band

In-Building and Outdoor DAS Products


Commercial Frequency Band (UL) 1850 1915 MHz Frequency Band (DL) 1930 - 1995 MHz Gain Adjustment Range DL 25 dB (45 70 dB)

Title Nexus FT 1900 MHz Including G-block Single Band

Part Number RH330020/101

Page 202

Nexus FT Dual Band 1850-1915, 824- 1930-1995, 869PCS/Cellular 849 MHz 894 MHz Including G-block Nexus FT 850 MHz Single Band Nexus FT 850 MHz Single Band Nexus FT Single Band 800iDEN Nexus FT Single Band 800iDEN & Public Safety Nexus FT Single Band 2100MHz UMTS Nexus FT Single Band 2100MHz UMTS 824 849 MHz 869 894 MHz

25 dB (45 70 dB)

RH334022/101

203

25 dB (45 70 dB)

RH400020/101

204

824 849 MHz

869 894 MHz

25 dB (45 70 dB)

RH400020/211

205

806 824 MHz

851 869 MHz

25 dB (45 70 dB)

RH500020/101

206

806 824 MHz

851 869 MHz

25 dB (45 70 dB)

RH500020/211

207

1920-1980 MHz 2110-2170 MHz

20 dB (45 65 dB)

RH600020/101

208

1920-1980 MHz 2110-2170 MHz

20 dB (45 65 dB)

RH600020/211

209

Nexus FT Dual Band 1920-1980, 880- 2110-2170, 925EGSM900 & 915 MHz 960 MHz WCDMA2100 Nexus FT Dual Band 1920-1980, 880- 2110-2170, 925EGSM900 & 915 MHz 960 MHz WCDMA2100 Nexus FT Dual Band 1920-1980, 2110-2170, 1805DCS1800 & 1710-1785 MHz 1880 MHz WCDMA2100 Nexus FT Dual Band 1920-1980, 2110-2170, 1805DCS1800 & 1710-1785 MHz 1880 MHz WCDMA2100 Nexus FT Single PS: 788 to 805 PS: 758 to 775 Band 700MHz for MHz (includes MHz (includes Public Safety (PS) upper D block) upper D block) and D block

20 dB (45 65 dB)

RH601022/101

210

20 dB (45 65 dB)

RH601022/211

211

20 dB (45 65 dB)

RH602022/101

212

20 dB (45 65 dB)

RH602022/211

213

45 - 70 dB

RH700030/101

214

187

Coverage Products

POWERWAVE

Nexus FT Single and Dual Band

In-Building and Outdoor DAS Products


Commercial Frequency Band Frequency Gain Adjustment Title (UL) Band (DL) Range DL Nexus FT Dual Band 788 to 805 MHz 758 to 775 MHz 700MHz for Public Safety (includes upper D (includes upper D 25 dB (45 70 dB) (PS) and D block block), 806 - 824 block), 851 - 869 /800iDEN MHz MHz lower A, B and C A, B and C blocks Nexus FT Single Band blocks (698MHz(728MHz700MHz LTE (A,B,C AND 716MHz), upper C 746MHz), upper 45 - 70 dB UPPER C BLOCKS) block (776MHz- C block (746MHz787MHz) 757MHz) Nexus FT Dual Band 806-824, 896-902 851-869, 935-941 900iDEN/800iDEN&Public 25 dB (45 70 dB) MHz MHz Safety Nexus FT Dual Band 806-824, 896-902 851-869, 935-941 900iDEN/800iDEN&Public 25 dB (45 70 dB) MHz MHz Safety Nexus FT Single Band AWS Nexus FT Single Band AWS 1710-1755 MHz 2110-2155 MHz 25 dB (45 70 dB)

Part Number RH705032/101

Page 215

RH770020/101

216

RH805022/101

217

RH805022/211

218

RH900020/101

219

1710-1755 MHz

2110-2155 MHz

25 dB (45 70 dB)

RH900020/211

220

188

POWERWAVE

Nexus FT Single and Dual Band

RH004002/001

Nexus FT Cover Upgrade 850 MHz Single Band

Cover Upgrade Configuration - AC powered, with one duplexed 7/16 DIN connector RF service port and coax RF donor port.
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption 824 - 849 MHz 869 - 894 MHz 10 dBo 25 dB (45 - 70 dB) 25 dB (35 - 60 dB) 1 dB Maximum Composite Power 43 dBm Full Band <-13 dBm (FCC) <-13 dBm (FCC) LED and by remote control 115/230 VAC 210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 156 (18 x 20.9 x 6.1) < 22 kg (48 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin -25 C to +55 C IP65 / NEM A 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL FCC CFR 47 part 22 ETS 300 019 EN 301 489

Carrier Count
2 4 8 16

Power Per Carrier FCC


40 37 34 31

Composite Power FCC


43 43 43 43

Power Per Carrier ETSI


29 29 29 28

Composite Power ETSI


32 35 38 40

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2009-03-10

189

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH100020/101

Nexus FT Single Band 900MHz

RH100020/101 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption 880-915 MHz 925-960 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum Composite Power +40dBm applicable for GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE) 35 MHz, EVM<7% , PCDE< -47dB, ACCR> 49dB[HSDPA+], EVM<7% , ACCR>48dB[LTE] <-36 dBm <-30 dBm LED and by Remote Control 115/230 VAC 210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg. (55 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin - 25C to + 55C IP65/NEMA4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL ETS 300 609-4, TS 25.143 , TS 36.143 ETS 300 019 EN 301 489

*Carrier Count
2 4 8 16

EGSM900 Power Per Carrier


29dBm 29dBm 29dBm 28dBm

Composite Power
32dBm 35dBm 38dBm 40dBm

Power Per Carrier ETSI


NA NA NA NA

Composite Power ETSI


NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-08-25

190

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH100020/211

Nexus FT Single Band 900MHz

RH100020/211 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption 880-915 MHz 925-960 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum Composite Power +40dBm* (Multi-carrier GSM or EDGE) 35 MHz <-36 dBm <-30 dBm LED and by Remote Control 115/230 VAC 210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg. (55 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin - 25C to + 55C IP65/NEMA4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL ETS 300 609-4 ETS 300 019 EN 301 489

*Carrier Count
2 4 8 16

EGSM900 Power Per Carrier


29dBm 29dBm 29dBm 28dBm

Composite Power
32dBm 35dBm 38dBm 40dBm

Power Per Carrier ETSI


NA NA NA NA

Composite Power ETSI


NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-18

191

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH200020/101

Nexus FT Single Band 1800MHz

RH200020/101 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption 1710-1785 MHz 1805-1880 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum Composite Power +40dBm applicable for GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE) 75 MHz, EVM<5% , PCDE< -47dB, ACCR> 51dB[HSDPA+], EVM<7% , ACCR> 53dB[LTE] <-36 dBm <-30 dBm LED and by Remote Control 115/230 VAC 210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg. (55 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin - 25C to + 55C IP65/NEMA4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL ETS 300 609-4, TS 25.143 , TS 36.143 ETS 300 019 EN 301 489

*Carrier Count
2 4 8 16

DCS1800 Power Per Carrier


35dBm 34dBm 31dBm 28dBm

Composite Power
38dBm 40dBm 40dBm 40dBm

Power Per Carrier ETSI


NA NA NA NA

Composite Power ETSI


NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-18

192

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH200020/211

Nexus FT Single Band DCS1800

RH200020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption 1710-1785 MHz 1805-1880 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum Composite Power +40dBm* (Multi-carrier GSM or EDGE) 75 MHz <-36 dBm <-30 dBm LED and by Remote Control 115/230 VAC 210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg. (55 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin - 25C to + 55C IP65/NEMA4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL ETS 300 609-4 ETS 300 019 EN 301 489

*Carrier Count
2 4 8 16

DCS1800 Power Per Carrier


35dBm 34dBm 31dBm 28dBm

Composite Power
38dBm 40dBm 40dBm 40dBm

Power Per Carrier ETSI


NA NA NA NA

Composite Power ETSI


NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-18

193

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH201022/101

Nexus FT Dual Band 1800/900

RH201022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption 1710-1785, 880-915 MHz 1805-1880, 925-960 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum composite power DCS1800 +40 dBm* Maximum composite power EGSM900 +40 dBm* Full Band <-36 dBm <-30 dBm LED and by remote control 115/230 VAC 420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protection -25 C to +55 C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL ETSI EN 300 609-4 ETS 300 019 -2.4E ETS 300 489-1

*Carrier Count
2 4 8 16 NA

EGSM900? Power Per Carrier


29dBm 29dBm 29dBm 28dBm NA

EGSM900 Composite Power


32dBm 35dBm 38dBm 40dBm NA

DCS1800 Power Per Carrier


35dBm 34dBm 31dBm 28dBm

DCS1800 Composite Power


38dBm 40dBm 40dBm 40dBm

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-02

194

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH201022/211

Nexus FT Dual Band 1800/900

RH201022/211 is AC powered, with two duplexed 7/16 DIN connector RF ports, one each band and two RX diversity 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption 1710-1785, 880-915 MHz 1805-1880, 925-960 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum composite power DCS1800 +40 dBm* Maximum composite power EGSM900 +40 dBm* Full Band <-36 dBm <-30 dBm LED and by remote control 115/230 VAC 420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protection -25 C to +55 C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL ETSI EN 300 609-4 ETS 300 019 -2.4E ETS 300 489-1

*Carrier Count
2 4 8 16 NA

EGSM900 Power Per Carrier


29dBm 29dBm 29dBm 28dBm NA

EGSM900 Composite Power


32dBm 35dBm 38dBm 40dBm NA

DCS1800 Power Per Carrier


35dBm 34dBm 31dBm 28dBm

DCS1800 Composite Power


38dBm 40dBm 40dBm 40dBm

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-01

195

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH300020/101

Nexus FT 1900 MHz Single Band

RH300020/101 is AC powered, with one duplexed 7/16 DIN connector RF port


ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption 1850 1910 MHz 1930 - 1990 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB Maximum Composite power 43 dBm Full Band <-13 dBm <-13 dBm LED and by remote control 115/230 VAC 210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin -25 C to +55 C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL FCC CFR 47 Part 15 and 24

*Carrier Count
2 4 8 16

Power Per Carrier FCC


40dBm 37dBm 34dBm 31dBm

Composite Power FCC


43dBm 43dBm 43dBm 43dBm

Power Per Carrier ETSI


NA NA NA NA

Composite Power ETSI


NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

#Error

196

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH300020/211

Nexus FT 1900 MHz Single Band

RH300020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption 1850 1910 MHz 1930 - 1990 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB Maximum Composite power 43 dBm Full Band <-13 dBm <-13 dBm LED and by remote control 115/230 VAC 210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin -25 C to +55 C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL FCC CFR 47 Part 15 and 24

*Carrier Count
2 4 8 16

Power Per Carrier FCC


40dBm 37dBm 34dBm 31dBm

Composite Power FCC


43dBm 43dBm 43dBm 43dBm

Power Per Carrier ETSI


NA NA NA NA

Composite Power ETSI


NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

#Error

197

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH304022/101

Nexus FT Dual Band PCS/Cellular

RH304022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption 1850-1910, 824-849 MHz 1930-1990, 869-894 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB +43 dBm (1900 MHz, Downlink , Composite) +43 dBm (800 MHz, Downlink , Composite) 65MHz (PCS), 25MHz (Cellular) <-13dBm <-13dBm LED and by remote control 115/230 VAC 420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 280 (18.3 x 20.9 x 12) < 44 kg (96 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protection - 25C to + 55C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL FCC Part 24, FCC part 22 ETS 300 019 -2.4E ETS 300 489-1

Carrier Count *
2 4 8 12 NA

Power Per Carrier


40dBm 37dBm 34dBm 32dBm NA

Composite Power
43dBm 43dBm 43dBm 43dBm

Power Per Carrier


NA NA NA

Composite Power
NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-01

198

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH304022/211

Nexus FT Dual Band PCS/Cellular

RH304022/211 is AC powered, with 4 duplexed 7/16 DIN connector RF ports to support main and RX diversity ports in each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption 1850-1910, 824-849 MHz 1930-1990, 869-894 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB +43 dBm (1900 MHz, Downlink , Composite) +43 dBm (800 MHz, Downlink , Composite) NA NA NA LED and by remote control 115/230 VAC 420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 280 (18.3 x 20.9 x 12) < 44 kg (96 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protection - 25C to + 55C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL FCC Part 24, FCC part 22 ETS 300 019 -2.4E ETS 300 489-1

Carrier Count *
2 4 8 12 NA

Power Per Carrier


40dBm 37dBm 34dBm 32dBm NA

Composite Power
43dBm 43dBm 43dBm 43dBm NA

Power Per Carrier


NA NA NA NA

Composite Power
NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-01

199

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH309022/101

Nexus FT Dual Band PCS/AWS

RH309022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption 1850-1910, 1710-1755 MHz 1930-1990, 2110-2155 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB +43 dBm (1900 MHz, Downlink , Composite) +43 dBm (2100 MHz, Downlink , Composite)* NA NA NA LED and by remote control 115/230 VAC 420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protection - 25C to + 55C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL FCC Part 24, FCC part 27 ETS 300 019 -2.4E ETS 300 489-1

Carrier Count *
2 4 8 12 NA

Power Per Carrier


40dBm 37dBm 34dBm 32dBm NA

Composite Power
43dBm 43dBm 43dBm 43dBm NA

Power Per Carrier


NA NA NA NA

Composite Power
NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-01

200

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH309022/211

Nexus FT Dual Band PCS/AWS

RH309022/211 is AC powered, with 4 duplexed 7/16 DIN connector RF ports to support main and RX diversity ports in each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption 1850-1910, 1710-1755 MHz 1930-1990, 2110-2155 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB +43 dBm (1900 MHz, Downlink , Composite) +43 dBm (2100 MHz, Downlink , Composite)* NA NA NA LED and by remote control 115/230 VAC 420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protection - 25C to + 55C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL FCC Part 24, FCC part 27 ETS 300 019 -2.4E ETS 300 489-1

Carrier Count *
2 4 8 12 NA

Power Per Carrier


40dBm 37dBm 34dBm 32dBm NA

Composite Power
43dBm 43dBm 43dBm 43dBm NA

Power Per Carrier


NA NA NA NA

Composite Power
NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-01

201

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH330020/101

Nexus FT 1900 MHz Including G-block Single Band

RH330020/101 is AC powered, with one duplexed 7/16 DIN connector RF port


ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption 1850 1915 MHz 1930 - 1995 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB Maximum Composite power 43 dBm 65MHz <-13 dBm <-13 dBm LED and by remote control 115/230 VAC 210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin -25 C to +55 C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL FCC CFR 47 Part 15 and 24

*Carrier Count
2 4 8 16

Power Per Carrier FCC


40dBm 37dBm 34dBm 31dBm

Composite Power FCC


43dBm 43dBm 43dBm 43dBm

Power Per Carrier ETSI


NA NA NA NA

Composite Power ETSI


NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-01-06

202

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH334022/101

Nexus FT Dual Band PCS/Cellular Including G-block

RH334022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption 1850-1915, 824-849 MHz 1930-1995, 869-894 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB +43 dBm (1900 MHz, Downlink , Composite) +43 dBm (800 MHz, Downlink , Composite) 65MHz (PCS), 25MHz (Cellular) <-13dBm <-13dBm LED and by remote control 115/230 VAC 420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 280 (18.3 x 20.9 x 12) < 44 kg (96 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protection - 25C to + 55C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL FCC Part 24, FCC part 22 ETS 300 019 -2.4E ETS 300 489-1

Carrier Count *
2 4 8 12 NA

Power Per Carrier


40dBm 37dBm 34dBm 32dBm NA

Composite Power
43dBm 43dBm 43dBm 43dBm

Power Per Carrier


NA NA NA

Composite Power
NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-01

203

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH400020/101

Nexus FT 850 MHz Single Band

RH400020/101 is AC powered, with one duplexed 7/16 DIN connector RF port


ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption 824 849 MHz 869 894 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB Maximum Composite power 43 dBm Full Band <-13 dBm <-13 dBm LED and by remote control 115/230 VAC 210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin -25 C to +55 C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL FCC CFR 47 Part 22

*Carrier Count
2 4 8 16

Power Per Carrier FCC


40dBm 37dBm 34dBm 31dBm

Composite Power FCC


43dBm 43dBm 43dBm 43dBm

Power Per Carrier ETSI


29dBm 29dBm 29dBm 28dBm

Composite Power ETSI


32dBm 35dBm 38dBm 40dBm

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

#Error

204

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH400020/211

Nexus FT 850 MHz Single Band

RH400020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption 824 849 MHz 869 894 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB Maximum Composite power 43 dBm Full Band <-13 dBm <-13 dBm LED and by remote control 115/230 VAC 210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin -25 C to +55 C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL FCC CFR 47 Part 22

*Carrier Count
2 4 8 16

Power Per Carrier FCC


40dBm 37dBm 34dBm 31dBm

Composite Power FCC


43dBm 43dBm 43dBm 43dBm

Power Per Carrier ETSI


29dBm 29dBm 29dBm 28dBm

Composite Power ETSI


32dBm 35dBm 38dBm 40dBm

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

#Error

205

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH500020/101

Nexus FT Single Band 800iDEN

RH500020/101 is AC powered, with one duplexed 7/16 DIN connector RF port


ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption 806 824 MHz 851 869 MHz 10 dBo 25 dB (45 70 dB) 25 dB (45 70 dB) 1 dB +43 dBm (iDEN800, Downlink , Quad BR) NA NA NA LED and by remote control 115/230 VAC 210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin - 25C to + 55C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL FCC CFR 47 Part 15, Part 90 ETS 300 019 -2.4E ETS 300 489-1

Carrier Count *
2 4 8 12

Power Per Carrier


40dBm 37dBm 34dBm 32dBm

Composite Power
43dBm 43dBm 43dBm 43dBm

Power Per Carrier ETSI


NA NA NA NA

Composite Power ETSI


NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2009-11-17

206

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH500020/211

Nexus FT Single Band 800iDEN&Public Safety

RH500020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption 806 824 MHz 851 869 MHz 10 dBo 25 dB (45 70 dB) 25 dB (45 70 dB) 1 dB +43 dBm (iDEN800, Downlink , Quad BR) NA NA NA LED and by remote control 115/230 VAC 210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin - 25C to + 55C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL FCC CFR 47 Part 15, Part 90 ETS 300 019 -2.4E ETS 300 489-1

Carrier Count *
2 4 8 12

Power Per Carrier


40dBm 37dBm 34dBm 32dBm

Composite Power
43dBm 43dBm 43dBm 43dBm

Power Per Carrier ETSI


NA NA NA NA

Composite Power ETSI


NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

#Error

207

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH600020/101

Nexus FT Single Band 2100MHz UMTS

RH600020/101 is AC powered, with one duplexed 7/16 DIN connector RF port


ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption 1920-1980 MHz 2110-2170 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum composite power +43dBm* 60 MHz <-36 dBm <-30 dBm LED and by remote control 115/230 VAC 210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin - 25C to + 55C IP65/NEMA4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL ESTI EN 301 908-11 ETS 300 019 ETS 300 489-1

*Carrier Count
2 4 8 12

Power Per Carrier


40dBm 37dBm 34dBm 32dBm

Composite Power
43dBm 43dBm 43dBm 43dBm

Power Per Carrier ETSI


NA NA NA NA

Composite Power ETSI


NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2009-01-15

208

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH600020/211

Nexus FT Single Band 2100MHz UMTS

RH600020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption 1920-1980 MHz 2110-2170 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum composite power +43dBm* 60 MHz <-36 dBm <-30 dBm LED and by remote control 115/230 VAC 210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin - 25C to + 55C IP65/NEMA4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL ESTI EN 301 908-11 ETS 300 019 ETS 300 489-1

*Carrier Count
2 4 8 12

Power Per Carrier


40dBm 37dBm 34dBm 32dBm

Composite Power
43dBm 43dBm 43dBm 43dBm

Power Per Carrier ETSI


NA NA NA NA

Composite Power ETSI


NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2009-01-15

209

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH601022/101

Nexus FT Dual Band EGSM900 & WCDMA2100

RH601022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption 1920-1980, 880-915 MHz 2110-2170, 925-960 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum composite power WCDMA2100 +43dBm* Maximum composite power EGSM900 +40 dBm* Full Band <-36 dBm <-30 dBm LED and by remote control 115/230 VAC 420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protection -25 C to +55 C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL ETSI EN 300 609-4 and EN 301 908-11 ETS 300 019 -2.4E ETS 300 489-1

*Carrier Count
2 4 8 16 NA

EGSM900 Power Per Carrier


29dBm 29dBm 29dBm 28dBm NA

EGSM900 Composite Power


32dBm 35dBm 38dBm 40dBm

WCDMAS 2100 Power Per Carrier


40dBm 37dBm 34dBm

WCDMAS 2100 Composite Power


43dBm 43dBm 43dBm NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-01

210

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH601022/211

Nexus FT Dual Band EGSM900 & WCDMA2100

RH601022/211 is AC powered, with two duplexed 7/16 DIN connector RF ports, one each band and two RX diversity 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption 1920-1980, 880-915 MHz 2110-2170, 925-960 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum composite power WCDMA2100 +43dBm* Maximum composite power EGSM900 +40 dBm* Full Band <-36 dBm <-30 dBm LED and by remote control 115/230 VAC 420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protection -25 C to +55 C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL ETSI EN 300 609-4 and EN 301 908-11 ETS 300 019 -2.4E ETS 300 489-1

*Carrier Count
2 4 8 16 NA

EGSM900 Power Per Carrier


29dBm 29dBm 29dBm 28dBm NA

EGSM900 Composite Power


32dBm 35dBm 38dBm 40dBm

WCDMAS 2100 Power Per Carrier


40dBm 37dBm 34dBm

WCDMAS 2100 Composite Power


43dBm 43dBm 43dBm NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-01

211

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH602022/101

Nexus FT Dual Band DCS1800 & WCDMA2100

RH602022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption 1920-1980, 1710-1785 MHz 2110-2170, 1805-1880 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum composite power WCDMA2100 +43dBm* Maximum composite power DCS1800 +40 dBm* Full Band <-36 dBm <-30 dBm LED and by remote control 115/230 VAC 420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protection -25 C to +55 C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL ETSI EN 300 609-4 and EN 301 908-11 ETS 300 019 ETS 300 489-1

*Carrier Count
2 4 8 12

DCS1800 Power Per Carrier


35dBm 34dBm 31dBm 29dBm

DCS1800 Composite Power


38dBm 40dBm 40dBm 40dBm

WCDMA 2100 Power Per Carrier


40dBm 37dBm 34dBm 32dBm

WCDMA 2100 Composite Power


43dBm 43dBm 43dBm 43dBm

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-01

212

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH602022/211

Nexus FT Dual Band DCS1800 & WCDMA2100

RH602022/211 is AC powered, with two duplexed 7/16 DIN connector RF ports, one each band and two RX diversity 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption 1920-1980, 1710-1785 MHz 2110-2170, 1805-1880 MHz 10 dBo 20 dB (45 65 dB) 20 dB (35 55 dB) 1 dB Maximum composite power WCDMA2100 +43dBm* Maximum composite power DCS1800 +40 dBm* Full Band <-36 dBm <-30 dBm LED and by remote control 115/230 VAC 420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protection -25 C to +55 C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL ETSI EN 300 609-4 and EN 301 908-11 ETS 300 019 ETS 300 489-1

*Carrier Count
2 4 8 12

DCS1800 Power Per Carrier


35dBm 34dBm 31dBm 29dBm

DCS1800 Composite Power


38dBm 40dBm 40dBm 40dBm

WCDMA 2100 Power Per Carrier


40dBm 37dBm 34dBm 32dBm

WCDMA 2100 Composite Power


43dBm 43dBm 43dBm 43dBm

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-01

213

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH700030/101

Nexus FT Single Band 700MHz for Public Safety (PS) and D block

Nexus FT 700 MHz Public Safety 20W, AC Pwr,WDM Fiber donor port
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption PS: 788 to 805 MHz (includes upper D block) PS: 758 to 775 MHz (includes upper D block) 10 dBo 45 - 70 dB 35 - 60 dB 1dB 43 dBm (758 to 773 MHz), 40 dBm (773 to 775 MHz) 17 MHz -13 dBm -13 dBm LED/SNMP 110 - 230 VAC 210 W typical, 250 W Max

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465x530x195 (18 x 20.9 x 8.3) 23 kg (50.7 lbs) 7/16 DIN Female FC-APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin -25C to +55C IP-65 (NEMA4)

APPROVALS AND TESTS


Safety Radio Environment EMC UL60950-1 FCC CFR47 Parts 15,27,90 GR-36-CORE FCC CFR47 Part 15, 27

*Carrier Count
2 4 8 12

Power Per Carrier


40dBm 37dBm 34dBm 31dBm

Composite Power
43dBm 43dBm 43dBm 43dBm

NA
NA NA NA NA

NA
NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-02

214

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH705032/101

Nexus FT Dual Band 700MHz for Public Safety (PS) and D block /800iDEN

RH705032/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption 788 to 805 MHz (includes upper D block), 806 - 824 MHz 758 to 775 MHz (includes upper D block), 851 - 869 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB 43 dBm (758 to 773 MHz), 40 dBm (773 to 775 MHz) +43 dBm (iDEN800, Downlink , Quad BR) 17MHZ (700 PS) NA NA LED and by remote control 115/230 VAC 420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protection - 25C to + 55C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL FCC Part 15, FCC part 90 ETS 300 019 -2.4E ETS 300 489-1

Carrier Count *
2 4 8 12 NA

Power Per Carrier


40dBm 37dBm 34dBm 32dBm NA

Composite Power
43dBm 43dBm 43dBm 43dBm NA

Power Per Carrier


NA NA NA NA

Composite Power
NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-10-28

215

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH770020/101

Nexus FT Single Band 700MHz LTE (A,B,C AND UPPER C BLOCKS)

Nexus FT 700 MHz LTE 20W, AC Pwr,WDM Fiber donor port


ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption lower A, B and C blocks (698MHz-716MHz), upper C block (776MHz-787MHz) A, B and C blocks (728MHz-746MHz), upper C block (746MHz-757MHz) 10 dBo 45 - 70 dB 35 - 60 dB 1dB 43 dBm Upper Band 11 MHz, lower Band 18 MHz -13 dBm -13 dBm LED/SNMP 110 - 230 VAC 210 W typical, 250 W Max

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465x530x195 (18 x 20.9 x 8.3) 23 kg (50.7 lbs) 7/16 DIN Female FC-APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin -25C to +55C IP-65 (NEMA4)

APPROVALS AND TESTS


Safety Radio Environment EMC UL60950-1 FCC CFR47 Parts 15,27,90 GR-36-CORE FCC CFR47 Part 15, 27

*Carrier Count
2 4 8 12

Power Per Carrier


40dBm 37dBm 34dBm 31dBm

Composite Power
43dBm 43dBm 43dBm 43dBm

NA
NA NA NA NA

NA
NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-03-29

216

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH805022/101

Nexus FT Dual Band 900iDEN/800iDEN&Public Safety

RH805022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption 806-824, 896-902 MHz 851-869, 935-941 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB +43 dBm (iDEN800, Downlink , Quad BR) +43 dBm (iDEN800, Downlink , Quad BR) NA NA NA LED and by remote control 115/230 VAC 420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protection - 25C to + 55C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL FCC Part 15, FCC part 90 ETS 300 019 -2.4E ETS 300 489-1

Carrier Count *
2 4 8 12 NA

Power Per Carrier


40dBm 37dBm 34dBm 32dBm NA

Composite Power
43dBm 43dBm 43dBm 43dBm NA

Power Per Carrier


NA NA NA NA

Composite Power
NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-01

217

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH805022/211

Nexus FT Dual Band 900iDEN/800iDEN&Public Safety

RH805022/211 is AC powered, with 4 duplexed 7/16 DIN connector RF ports to support main and RX diversity ports in each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption 806-824, 896-902 MHz 851-869, 935-941 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB +43 dBm (iDEN800, Downlink , Quad BR) +43 dBm (iDEN800, Downlink , Quad BR) NA NA NA LED and by remote control 115/230 VAC 420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 310 (18.3 x 20.9 x 12.3) < 44 kg (96 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protection - 25C to + 55C IP65 / NEMA 4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL FCC Part 15, FCC part 90 ETS 300 019 -2.4E ETS 300 489-1

Carrier Count *
2 4 8 12 NA

Power Per Carrier


40dBm 37dBm 34dBm 32dBm NA

Composite Power
43dBm 43dBm 43dBm 43dBm NA

Power Per Carrier


NA NA NA NA

Composite Power
NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-01

218

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH900020/101

Nexus FT Single Band AWS

RH900020/101 is AC powered, with one duplexed 7/16 DIN connector RF port


ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption 1710-1755 MHz 2110-2155 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB Maximum composite power +43dBm* 45 MHz <-13 dBm NA LED and by remote control 115/230 VAC 210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin - 25C to + 55C IP65/NEMA4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL FCC Part 27 ETS 300 019 ETS 300 489-1

*Carrier Count
2 4 8 12

Power Per Carrier


40dBm 37dBm 34dBm 32dBm

Composite Power
43dBm 43dBm 43dBm 43dBm

Power Per Carrier ETSI


NA NA NA NA

Composite Power ETSI


NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-06-21

219

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH900020/211

Nexus FT Single Band AWS

RH900020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Band 1 Output Power at Antenna Port Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Type Power Consumption 1710-1755 MHz 2110-2155 MHz 10 dBo 25 dB (45 70 dB) 25 dB (35 60 dB) 1 dB Maximum composite power +43dBm* 45 MHz <-13 dBm NA LED and by remote control 115/230 VAC 210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 465 x 530 x 211 (18 x 20.9 x 8.3) < 25 kg (55 lbs) 7/16 DIN female FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protectioin - 25C to + 55C IP65/NEMA4

APPROVALS AND TESTS


Safety Radio Environment EMC UL, EN 60950, ETL FCC Part 27 ETS 300 019 ETS 300 489-1

*Carrier Count
2 4 8 12

Power Per Carrier


40dBm 37dBm 34dBm 32dBm

Composite Power
43dBm 43dBm 43dBm 43dBm

Power Per Carrier ETSI


NA NA NA NA

Composite Power ETSI


NA NA NA NA

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

#Error

220

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Coverage Products

POWERWAVE

Nexus FT Rack Mounts

In-Building and Outdoor DAS Products


Commercial Frequency Band Frequency (UL) Band (DL) 1850-1910, 824-849 MHz 1850-1910, 806-824 MHz 1850-1910, 896-902 MHz 1930-1990, 869-894 MHz 1930-1990, 851-869 MHz 1930-1990, 935-941 MHz Gain Adjustment Range DL 25 (45 - 70) dB

Title Nexus Dual Band Repeaters Nexus Dual Band Repeaters Nexus Dual Band Repeaters

Part Number RH304022/03A

Page 222

25 (45 - 70) dB

RH305022/03A

223

25 (45 - 70) dB

RH308022/03A

224

221

POWERWAVE

Nexus FT Rack Mounts

RH304022/03A

Nexus Dual Band Repeaters

Nexus FT Rack Mount Dual Band 1900 / 850, Simplex SMA donor ports and duplexed N service ports per band.
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption 1850-1910, 824-849 MHz 1930-1990, 869-894 MHz n/a 25 (45 - 70) dB 25 (35 - 60) dB 1 dB 20 W 20 W 60 / 25 MHz -13 dBm -13 dBm LED/SNMP 110 - 230 VAC 420 W typical, 500 W Max

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 266 x 483 x 551 (10.5 x 19 x 21.7) 30 (66) SMA (Donor), N (Service) n/a -units require ORD for optical to RF conversion

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protection 0C to +55C IP50

APPROVALS AND TESTS


Safety Radio Environment EMC UL60950-1 FCC CFR47 Parts 22, 24 ETS 300 019 FCC CFR47 Part 22, 24

Carrier Count
2 4 8 12

Power Per Carrier


40 dBm 37 dBm 34 dBm 32 dBm

Composite Power
43 dBm 43 dBm 43 dBm 43 dBm

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-10

222

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Rack Mounts

RH305022/03A

Nexus Dual Band Repeaters

Nexus FT Rack Mount Dual Band 1900 / 800iPS, Simplex SMA donor ports and duplexed N service ports per band.
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption 1850-1910, 806-824 MHz 1930-1990, 851-869 MHz n/a 25 (45 - 70) dB 25 (35 - 60) dB 1 dB 20 W 20 W 60 / 18 MHz -13 dBm -13 dBm LED/SNMP 110 - 230 VAC 420 W typical, 500 W Max

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 266 x 483 x 551 (10.5 x 19 x 21.7) 30 (66) SMA (Donor), N (Service) n/a -units require ORD for optical to RF conversion

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protection 0 to +55C IP50

APPROVALS AND TESTS


Safety Radio Environment EMC UL60950-1 FCC CFR47 Parts 24, 90 ETS 300 019 FCC CFR47 Parts 24, 90

Carrier Count
2 4 8 12

Power Per Carrier


40 dBm 37 dBm 34 dBm 32 dBm

Composite Power
43 dBm 43 dBm 43 dBm 43 dBm

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-10

223

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Nexus FT Rack Mounts

RH308022/03A

Nexus Dual Band Repeaters

Nexus FT Rack Mount Dual Band 1900 / 900i, Simplex SMA donor ports and duplexed N service ports per band.
ELECTRICAL SPECIFICATIONS
Frequency Band UL Frequency Band DL Fiber Link Budget Gain Adjustment Range DL Gain Adjustment Range UL Gain Step Resolution Output Power DL Output Power DL 2 Instantaneous Bandwidth Intermodulation 9KHz - 1 GHz Intermodulation 1 GHz - 12.75 GHz ETSI Alarm Power Supply Options Power Consumption 1850-1910, 896-902 MHz 1930-1990, 935-941 MHz n/a 25 (45 - 70) dB 25 (35 - 60) dB 1 dB 20 W 20 W 60 / 6 MHz -13 dBm -13 dBm LED/SNMP 110 - 230 VAC 420 W typical, 500 W Max

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Weight kg (lbs) RF Connectors Optical Connectors 266 x 483 x 551 (10.5 x 19 x 21.7) 30 (66) SMA (Donor), N (Service) n/a -units require ORD for optical to RF conversion

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Ingression Protection 0 to +55 IP50

APPROVALS AND TESTS


Safety Radio Environment EMC UL60950-1 FCC CFR47 Parts 24, 90 ETS 300 019 FCC CFR47 Parts 24, 90

Carrier Count
2 4 8 12

Power Per Carrier


40 dBm 37 dBm 34 dBm 32 dBm

Composite Power
43 dBm 43 dBm 43 dBm 43 dBm

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2010-11-10

224

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Repeater Remote Management

Power wave

Powerwaves IP/SNML/GPS (ISG) communication interface module provides remote operation, control and monitoring of Powerwaves repeater networks reducing the need for site visits through a very cost-effective and reliable IP and SNMP connection. The ISG interface modules improve the repeaters remote access offering Ethernet and packet switched connections and a Web craft terminal. The ISG interface can manage numerous repeaters and when integrated with Powerwaves NetWay Vision, offers a complete solution for network management.

Coverage Products

POWERWAVE

Repeater Remote Management

IP/SNMP/GPS Repeater Remote Management Interface


Modem Frequencies Part Number UA107 62/1

Title IP/SNMP/GPS: Ethernet Interface Upgrade Option

Power Output

GPS Receiver N/A

Page 227

+/- 6.5 VDC @ 2A N/A (supplied by repeater)

IP/SNMP/GPS: 900/1800 Dual Mode +/- 6.5 VDC @ 2A 900 / 1800 MHz Wireless GPRS (supplied by repeater) Packet Data Interface IP/SNMP/GPS: 850/1900 Dual Mode +/- 6.5 VDC @ 2A 850 / 1900 MHz Wireless CDMA (supplied by repeater) Packet Data Interface IP/SNMP/GPS: 850/1900 Dual Mode +/- 6.5 VDC @ 2A 850 / 1900 MHz Wireless GPRS (supplied by repeater) Packet Data Interface

12 channel L1 (1575.42 MHz), position accuracy UA107 62/2 ~5m 12 channel L1 (1575.42 MHz), position accuracy UA107 62/3 ~5m 12 channel L1 (1575.42 MHz), position accuracy UA107 62/4 ~5m

228

229

230

226

POWERWAVE

Repeater Remote Management

UA107 62/1

IP/SNMP/GPS: Ethernet Interface Upgrade Option

Optional kit that provides wired Ethernet packet data interface for communication with Powerwaves Netway Vision (NWV)
ELECTRICAL SPECIFICATIONS
Power Input Modem Frequencies GPS Receiver Battery Backup Battery Change Options +6.5 VDC @ 2A (supplied by Repeater) NA NA 10 minute minimum (for communications) Continuous trickle or high charge

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Operating Range Repeater Interface Modem and GPS Interface Operational Conditions Non-Operational Conditions Certifications 35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in) -25 C to +55 C ( repeater ambient temps) Use existing communication ports NA ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations) ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage) EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007), FCC (Part 15)

PROCESSING
Automated Location Based Tuning (via GPS) Repeater Management NA Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade with the latest Repeater software version. For EOL Repeater models this management option also requires control unit hardware upgrade. Contact Powerwave for more information.

COMMUNICATIONS
Packet Data Mode Networks Supported Fallback Circuit Switched Mode Northbound Traffic Wireless Modem Type Network Management Maintenance Access (Local Craft Port) IP Ethernet NA NA SNMP v1, v2c and http NA NWM 3.2.2 and greater; local web interface 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Updated: 2010-05-11

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

227

POWERWAVE

Repeater Remote Management

UA107 62/2

IP/SNMP/GPS: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Optional kit that provides GPRS wireless packet data interface for communication with Powerwaves NetWay Vision (NWV) and automated location tuning via GPS for moving repeaters
ELECTRICAL SPECIFICATIONS
Power Input Modem Frequencies GPS Receiver Battery Backup Battery Change Options +6.5 VDC @ 2A (supplied by Repeater) 900 / 1800 MHz 12 channel L1 (1575.42 MHz), position accuracy ~ 5 m 10 minute minimum (for communications) Continuous trickle or high charge

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Operating Range Repeater Interface Modem and GPS Interface Operational Conditions Non-Operational Conditions Certifications 35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in) -25 C to +55 C ( repeater ambient temps) Use existing communication and antenna ports Mezzanine Board ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations) ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage) EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007)

PROCESSING
Automated Location Based Tuning (via GPS) Repeater Management Up to 12 Repeaters Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade with the latest Repeater software version. For EOL Repeater models this management option also requires control unit hardware upgrade. Contact Powerwave for more information.

COMMUNICATIONS
Packet Data Mode Networks Supported Fallback Circuit Switched Mode Northbound Traffic Wireless Modem Type Network Management Maintenance Access (Local Craft Port) GPRS and IP Ethernet NA GSM SNMP v1, v2c and http Wavecom Quik series Extended (Q24 EX001) NWM 3.2.2 and greater; local web interface 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Updated: 2010-05-11

228

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Repeater Remote Management

UA107 62/3

IP/SNMP/GPS: 850/1900 Dual Mode Wireless CDMA Packet Data Interface

Optional kit that provides CDMA wireless packet data interface for communication with Powerwaves NetWay Vision (NWV)
ELECTRICAL SPECIFICATIONS
Power Input Modem Frequencies GPS Receiver Battery Backup Battery Change Options +6.5 VDC @ 2A (supplied by Repeater) 850 / 1900 MHz 12 channel L1 (1575.42 MHz), position accuracy ~ 5 m 10 minute minimum (for communications) Continuous trickle or high charge

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Operating Range Repeater Interface Modem and GPS Interface Operational Conditions Non-Operational Conditions Certifications 35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in) -25 C to +55 C ( repeater ambient temps) Use existing communication and antenna ports Mezzanine Board ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations) ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage) EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007), FCC (Part 15)

PROCESSING
Automated Location Based Tuning (via GPS) Repeater Management Up to 12 Repeaters Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade with the latest Repeater software version. For EOL Repeater models this management option also requires control unit hardware upgrade. Contact Powerwave for more information.

COMMUNICATIONS
Packet Data Mode Networks Supported Fallback Circuit Switched Mode Northbound Traffic Wireless Modem Type Network Management Maintenance Access (Local Craft Port) CDMA2000 1XRTT and IP ethernet Verizon NA SNMP v1, v2c and http Wavecom Quik series (Q2438) NWM 3.2.2 and greater; local web interface 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Updated: 2010-05-11

229

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Repeater Remote Management

UA107 62/4

IP/SNMP/GPS: 850/1900 Dual Mode Wireless GPRS Packet Data Interface

Optional kit that provides GPRS wireless packet data interface for communication with Powerwaves Netway Vision (NWV)
ELECTRICAL SPECIFICATIONS
Power Input Modem Frequencies GPS Receiver Battery Backup Battery Change Options +6.5 VDC @ 2A (supplied by Repeater) 850 / 1900 MHz 12 channel L1 (1575.42 MHz), position accuracy ~ 5 m 10 minute minimum (for communications) Continuous trickle or high charge

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in) Operating Range Repeater Interface Modem and GPS Interface Operational Conditions Non-Operational Conditions Certifications 35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in) -25 C to +55 C ( repeater ambient temps) Use existing communication and antenna ports Mezzanine Board ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations) ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage) EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007), FCC (Part 15)

PROCESSING
Automated Location Based Tuning (via GPS) Repeater Management Up to 12 Repeaters Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade with the latest Repeater software version. For EOL Repeater models this management option also requires control unit hardware upgrade. Contact Powerwave for more information.

COMMUNICATIONS
Packet Data Mode Networks Supported Fallback Circuit Switched Mode Northbound Traffic Wireless Modem Type Network Management Maintenance Access (Local Craft Port) GPRS and IP Ethernet NA GSM SNMP v1, v2c and http Wavecom Quik series Extended (Q24 EX001) NWM 3.2.2 and greater; local web interface 10/100 BaseT Ethernet Port (DHCP managed) and RS232

Updated: 2010-05-11

230

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Antenna Products

Power wave

A Tradition of Quality Since 1946


Powerwave delivers antennas to customers around the world, offering solutions for all mobile telephony standards. Our designers and engineers build on years of experience; we have developed and manufactured top-quality antennas since 1946 from our core platform formerly under the industry leading Allgon brand name.

Broadband Single and Dual Band iRET iDiplexer Remote Electrical Tilt (RET) Indoor Clean Site Solutions Mounting Solutions

State of the Art Antennas are the Key to Reducing Total Cost of Ownership
The Powerwave broadband multiband antennas offer network operators fast and successful roll-out of next generation networks with excellent RF-performance. Our antennas are designed to overcome 3G deployment challenges, such as space and installation issues as well as various co-siting scenarios. The Powerwave broadband antenna technology simplifies logistics for network operators active in multiple markets.

Antenna Products

Antenna Products

Powerwave Technologies, Inc.

A Tradition of Quality Since 1946 Powerwave delivers antennas to customers around the world, offering solutions for all mobile telephony standards. Our designers and engineers build on years of experience; we have developed and manufactured top-quality antennas since 1946 from our core platform; formerly under the industry leading Allgon brand name. State of the Art Antennas are the Key to Reducing Total Cost of Ownership The Powerwave broadband multiband antennas offer network operators fast and successful roll-out of next generation networks with excellent RF-performance. Our antennas are designed to overcome 3G deployment challenges, such as space and installation issues as well as various co-siting scenarios. The Powerwave broadband antenna technology simplifies logistics for network operators active in multiple markets.

Antenna Products
Broadband Antennas The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide voltage standing wave ratio (VSWR) bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provide a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible crosspolar discrimination value. Single Band Antennas The Powerwave single band antennas outstanding performance in the field derives from excellent VSWR, isolation, beam squint and tracking. This design ensures minimized intermodulation issues, thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at 45 to provide the independently fading signals needed for achieving top-quality coverage. As a result of thorough, in-depth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance. Dual Band Antennas The Powerwave dual band, broadband antennas are available in a variety of designs combining a low broadband with a high broadband or a high broadband with another high broadband. The Powerwave dual band antennas are built on patented and well proven aperture-coupled patch technology and are available both as vertical polarized as well as cross polarized. Easy-to-install dual band antennas from Powerwave are deployed in numerous, wireless networks worldwide. All have endured extensive field trials in close collaboration with cell planners and other communications providers to ensure Powerwave dual band antennas perform to expectations.

232
4

Antenna Products

Antenna Products

Powerwave Technologies, Inc.

iRET Antennas The iRET antenna family is the next iteration of Powerwave's innovative antenna product line, which integrates remote electrical tilt functionality under the antenna radome, delivering maximized functionality and improved aesthetics, while eliminating installation and reliability issues that can occur with typical exterior RET modules. iDiplexer iDiplexer antennas combine the performance of Powerwaves high performing multiband antenna line and external diplexer into one product. iDiplexed antennas offer a reduced amount of connectors and feeder lines to customers who are limited in adding additional feeders due to wind load and space limitation on towers. Customers can rapidly deploy an additional overlay network by just exchanging the existing antennas with iDiplexed antennas and reusing the existing feeders. iDiplexed antennas usually combine the low band and high band frequencies into a single pair of connectors, still keeping the independent variable down tilt capability. Remote Electrical Tilt Antennas (RET) The Powerwave remote electrical tilt (RET) system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. The system consists of a master control unit (MCU) that controls the antenna line devices (ALDs) and supplies DC power to them via a common bus. ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system. Indoor Antennas The indoor antenna is designed to blend into a wall or ceiling inside a building and is the base antenna for the Powerwave distributed antenna system. The indoor antenna covers all bands from 800 MHz up to 2500 MHz and supports multiband operation. Easy-to-install dual band antennas from Powerwave are deployed in numerous wireless networks worldwide. Using fewer antennas of discreetly functional design is an improvement over using numerous antennas of unsightly size and appearance, especially with today's aesthetic concerns. Clean Site Solutions Clean Site solutions minimize the visual impact of a complete antenna system and significantly reduces investment and operational costs for network operators when building new or upgrading existing networks. Building permits for existing antenna installations can be used when replacing old, passive antennas with the Clean Site solution. This simplifies the site acquisition process significantly and shortens roll-out time considerably. All Clean Site antennas support remote electrical tilt for optimization of the coverage footprint and tuning of network performance. By integrating all functionality into one single unit, Clean Site offers you a flexible and attractive solution in the most cost efficient way. Mounting Solutions Our mounting solutions consist of rugged brackets with an aesthetic design and the flexibility to address multiple situations and requirements. All Powerwave antennas are delivered with mounting brackets pre-mounted. The intent is to reduce logistic and tower crew installation costs for our customers. All brackets have a high quality surface treatment to maintain the Powerwave standard for product exposure to severe environments. By using steel in the sheet metal parts of the tilt brackets, a robust and rigid design is ensured.

233
5

Broadband Antennas

Power wave

The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch technology, which provides high isolation performance and a wide voltage standing wave ratio (VSWR) bandwidth. The antennas have superior radiation patterns due to a unique reflector design that provide a very small variation of the -3dB horizontal beam width over the frequency band as well as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible cross-polar discrimination value.

Broadband Antennas

POWERWAVE

Broadband Antennas

Single Broadband Antennas Cross Polarized High Broadband Cross Polarized Antennas, 1710-2170 MHz Low Broadband Cross Polarized Antennas, 806-960 MHz Low Broadband Cross Polarized Antennas, 698-894 MHz Vertical Polarized ALP Broadband Cross Polarized Antennas, 806-960 MHz Dual Broadband Antennas Cross Polarized Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz Triple Broadband Antennas Cross Polarized Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz Page 318 Page 299 307 Page 236 257 289 Page 297

235

Single Broadband Antennas

POWERWAVE

High Broadband Cross Polarized Antennas, 1710-2170 MHz

Single Broadband Antennas


Cross Polarized High Broadband Cross Polarized Antennas, 1710-2170 MHz

Horizontal Beamwidth 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 90 90 90 90 90

Gain dBi dBd 18.1/16 18.3/16.2 18.1/16 19.5/17.4 15.8/13.7 18.1/16 18.1/16 18.1/16 18/15.9 18.1/16 18.1/16 18.3/16.2 18.3/16.2 18/15.9 19.5/17.4 14.1/12 15.6/13.5 15.8/13.7 16.7/14.6 17.9/15.8

Tilt
2 0-8 2-10 0-5.5

Length 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 2.0m (6'6") 0.7m (23) 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 2.0m (6'6") 0.7m (2'3") 0.7m (2'3") 0.7m (2'3") 1.3m (4'3") 2.0m (6'6")

Part Number 5701.02 5721.00 5721.02 5722.00 7700.06 7701.02 7701.06 7721.02 7721.06 7721.10 7701.00 7721.00 7721.40 7701.1ST.0000.01 7722.00 7735.00A 7720.00 7700.00 7740.00A 7745.00A

Page 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256

FET FET FET FET MET FET FET MET MET FET MET MET MET FET MET MET

236

POWERWAVE

Single Broadband Antennas

5701.02

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.1/16 TILT: 2 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19 >30 <1.0 >-22,typical>-18 0.5 >30 >26 >17 >17 <-153 67 7.2 1710-1880 17.4/15.3 1710-2170 1850-1990 17.8/15.7 Dual linear 45 50 <1.4:1 66 6.7 2 >19 >30 <1.0 >-22,typical>-18 0.5 >30 >26 >17 >14 <-150 250 500 >19 >30 <1.0 >-22,typical>-18 0.5 >30 >26 >20 >11 <-160 64 6.4 1920-2170 18.1/16

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 7.7 (16.9) 4 (8.8) 281 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 1480x200x200 (410x8x8) 11.5 (25.3) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-10-21

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

237

POWERWAVE

Single Broadband Antennas

5721.00

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.3/16.2 TILT: 0-8 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,18,16,16,14 @ 0,2,4,6,8 >30 <1.0 >-24 typical >-18 0.5 >30 >27 >17 >18 <-153 67 7.0 1710-1880 17.6/15.5 1710-2170 1850-1990 18.0/15.9 Dual Linear 45 50 <1.4:1 66 6.6 0-8 >18,18,16,16,14 @ 0,2,4,6,8 >30 <1.0 >-24 typical >-18 0.5 >30 >27 >17 >14 <-153 250 500 >18,18,16,16,14 @ 0,2,4,6,8 >30 <1.0 >-24 typical >-18 0.5 >30 >27 >20 >12 <-160 64 6.3 1920-2170 18.3/16.2

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1309x167x89.5(43x6x3) Pre Mounted Standard Brackets 9.7 (21.3) 6.0 (13.2) 281 42 (93) 55 (123) DC Grounded -40C to +60C PVC Light Grey 1480x200x200 (410x8x8) 13.5 (29.7) 8110.10, 8110.40 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010

Updated: 2010-06-04

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

238

POWERWAVE

Single Broadband Antennas

5721.02

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.1/16.0 TILT: 2-10 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,19,18,17,16@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >18 <-153 67 7.0 1710-1880 17.5/15.4 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 66 6.6 2-10 >20,20,19,19,18@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >14 <-153 250 500 >20,20,19,19,18@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >20 >12 <-160 64 6.3 1920-2170 18.1/16.0

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 9.7 (21.3) 6 (13.2) 281 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 1480x200x200 (410x8x8) 13.5 (29.7) 8110.10, 8110.40 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-06-04

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

239

POWERWAVE

Single Broadband Antennas

5722.00

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 19.5/17.4 TILT: 0-5.5 LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 250 500 >18,18,18,16,16,14@0,1,2,3,4,5 >30 <1.0 >-20,typical>-16 0.4 >30 >27 >19 >20 <-153 67 4.7 1710-1880 19/16.9 1710-2170 1850-1990 19.2/17.1 Dual Slant 45 50 <1.4:1 66 4.4 0 - 5.5 >18,18,18,16,16,14@0,1,2,3,4,5 >30 <1.0 >-20,typical>-16 0.4 >30 >27 >19 >17 <-153 >18,18,18,16,16,14@0,1,2,3,4,5 >30 <1.0 >-20,typical>-16 0.4 >30 >27 >21 >12 <-160 65 4.2 1920-2170 19.5/17.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1934x167x89.5 (64x6x3) Pre mounted standard brackets 14 (31) 8.5 (18.7) 416 42 (93) 55 (123) DC Grounded -40C to +60C PVC Light Grey 2105x200x200 (611x8x8) 15.5 (34.1) 8110.10, 8110.40 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-07-06

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

240

POWERWAVE

Single Broadband Antennas

7700.06

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.8/13.7 TILT: 6 LENGTH: 0.7m (23)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >17 >30 <1.0 >-26,typical>-20 0.6 >30 >26 >17 >17 <-153 67 14.7 1710-1880 15.0/12.9 1710-2170 1850-1990 15.5/13.4 Dual linear 45 50 <1.4:1 65 13.8 6 >17 >30 <1.0 >-26,typical>-20 0.6 >30 >26 >17 >15 <-153 250 500 >17 >30 <1.0 >-26,typical>-20 0.6 >30 >26 >19 >11 <-160 64 12.8 1920-2170 15.8/13.7

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 709x167x89.5 (23x6x3) Pre-mounted standard brackets 6.7 (14.8) 3 (6.6) 133 42 (93) 55 (123) DC grounded ASA Light Grey 880x200x200 (211x 8x 8) 10 (22) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

PN7700.06

Updated: 2010-10-22

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

241

POWERWAVE

Single Broadband Antennas

7701.02

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.1/16 TILT: 2 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19 >30 <1.0 >-22,typical>-18 0.5 >30 >26 >17 >17 <-153 67 7.2 1710-1880 17.4/15.3 1710-2170 1850-1990 17.8/15.7 Dual linear 45 50 <1.4:1 66 6.7 2 >19 >30 <1.0 >-22,typical>-18 0.5 >30 >26 >17 >14 <-153 250 500 >19 >30 <1.0 >-22,typical>-18 0.5 >30 >26 >20 >11 <-160 64 6.4 1920-2170 18.1/16

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 7.7 (16.9) 4 (8.8) 281 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1480x200x200 (410x8x8) 11.5 (25.3) 7456.00A,7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08192 Rev A

Updated: 2010-12-02

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

242

POWERWAVE

Single Broadband Antennas

7701.06

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.1/16.0 TILT: 6 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18 >30 <1.0 >-26,typical>-20 0.5 >29 >25 >17 >17 <-153 67 7.2 1710-1880 17.5/15.4 1710-2170 1850-1990 17.8/15.7 Dual linear 45 50 <1.4:1 65 6.7 6 >18 >30 <1.0 >-26,typical>-20 0.5 >29 >25 >17 >14 <-153 250 500 >18 >30 <1.0 >-26,typical>-20 0.5 >29 >25 >20 >11 <-160 64 6.4 1920-2170 18.1/16.0

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 7.7 (16.9) 4 (8.8) 281 42 (93) 55 (123) DC grounded ASA Light Grey 1480x200x200 (410x8x8) 11.5 (25.3) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08193 Rev A

Updated: 2010-10-22

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

243

POWERWAVE

Single Broadband Antennas

7721.02

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.1/16.0 TILT: 2-10 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,19,18,17,16@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >18 <-153 67 7.0 1710-1880 17.5/15.4 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 66 6.6 2-10 >20,20,19,19,18@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >14 <-153 250 500 >20,20,19,19,18@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >20 >12 <-160 64 6.3 1920-2170 18.1/16.0

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 9.7 (21.3) 6 (13.2) 281 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1480x200x200 (410x8x8) 13.5 (29.7) 8110.10, 8110.40 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-05-28

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

244

POWERWAVE

Single Broadband Antennas

7721.06

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.0/15.9 TILT: 6-14 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,19,18,17,16@6,8,10,12,14 >30 <2 >-24,typical>-18 0.5 >30 >27 >17 >18 <-153 67 7.3 1710-1880 17.5/15.4 1710-2170 1850-1990 17.8/15.7 Dual linear 45 50 <1.4:1 66 6.9 6-14 >20,20,20,19,18@6,8,10,12,14 >30 <2 >-24,typical>-18 0.5 >30 >27 >17 >14 <-153 250 500 >20,20,20,19,18@6,8,10,12,14 >30 <2 >-24,typical>-18 0.5 >30 >27 >20 >12 <-160 64 6.6 1920-2170 18.0/15.9

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 9.7 (21.3) 6 (13.2) 281 42 (93) 55 (123) DC grounded ASA Light Grey 1480x200x200 (410x8x8) 13.5 (29.7) 8110.40, 8110.10 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08196 Rev A

Updated: 2010-04-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

245

POWERWAVE

Single Broadband Antennas

7721.10

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.1/16.0 TILT: 2-10 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,19,18,17,16@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >18 <-153 67 7.0 1710-1880 17.5/15.4 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 66 6.6 2-10 >20,20,19,19,18@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >14 <-153 250 500 >20,20,19,19,18@2,4,6,8,10 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >20 >12 <-160 64 6.3 1920-2170 18.1/16.0

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) No pre-mounted bracket. 9.7 (21.3) 6 (13.2) 281 42 (93) 55 (123) DC grounded ASA Light Grey 1480x200x200 (410x8x8) 13.5 (29.7) 8110.40, 8110.10 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08196 Rev A

Updated: 2010-04-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

246

POWERWAVE

Single Broadband Antennas

7701.00

High Broadband Cross Polarized

POLARIZATION: X-pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.2/16.1 TILT: 0 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-20,typical>-18 0.5 >30 >27 >17 >17 <-153 67 7.2 1710-1880 17.5/15.4 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 66 6.7 0 >20 >30 <1.0 >-20,typical>-18 0.5 >30 >27 >17 >14 <-153 250 500 >20 >30 <1.0 >-20,typical>-18 0.5 >30 >27 >20 >11 <-160 64 6.4 1920-2170 18.2/16.1

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 7.7 (16.9) 4 (8.8) 281 42 (93) 55 (123) DC grounded ASA Light Grey 1480x200x200 (410x8x8) 11.5 (25.3) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08191 Rev A

Updated: 2010-10-22

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

247

POWERWAVE

Single Broadband Antennas

7721.00

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.3/16.2 TILT: 0-8 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,18,16,16,14,@0,2,4,6,8 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >18 <-153 67 7.0 1710-1880 17.6/15.5 1710-2170 1850-1990 18.0/15.9 Dual linear 45 50 <1.4:1 66 6.6 0-8 >18,18,16,16,14,@0,2,4,6,8 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >14 <-153 250 500 >18,18,16,16,14,@0,2,4,6,8 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >20 >12 <-160 64 6.3 1920-2170 18.3/16.2

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 9.7 (21.3) 6.0 (13.2) 281 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1480x200x200 (410x8x8) 13.5 (29.7) 8110.40, 8110.10 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010

Updated: 2010-04-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

248

POWERWAVE

Single Broadband Antennas

7721.40

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.3/16.2 TILT: 0-8 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W)
This is the connectur up version of 7721.00

1710-2170 1710-1880 17.6/15.5 1850-1990 18.0/15.9 Dual linear 45 50 <1.4:1 67 7.0 >18,18,16,16,14 @ 0,2,4,6,8 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >18 <-153 66 6.6 0-8 >18,18,16,16,14 @ 0,2,4,6,8 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >17 >14 <-153 250 500 >18,18,16,16,14 @ 0,2,4,6,8 >30 <1.0 >-24,typical>-18 0.5 >30 >27 >20 >12 <-160 64 6.3 1920-2170 18.3/16.2

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Top 1309x167x89.5 mm (43x6x3) Pre-mounted standard brackets 9.7 (21.3) 6 (13.2) 281 42 (93) 55 (123) DC grounded ASA Light grey 1480x200x200 (410x8x8) 13.5 (29.7) 7010.00, 7011.00, 7012.00 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-04-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

249

POWERWAVE

Single Broadband Antennas

7701.1ST.0000.01

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 350 700 <-150 <-150 <-150 <-160 >17 >17 67 7.2 1710-1880 17.0/14.9 Dual Slant +/- 45 50 1.4:1 66 6.7 2 >20 >30 <1.0 >13 0.5 >30 >30 >17 >14 >20 >11 65 6.4 1710-2170 1850-1990 1920-2170 18/15.9

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

7/16 DIN Female Bottom 1309x167x89.5 10.1 281 70 DC Grounded ASA Light Grey 1480x200x200 11

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-10-22

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

250

POWERWAVE

Single Broadband Antennas

7722.00

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 19.5/17.4 TILT: 0-5.5 LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,18,18,16,16,14,@0,1,2,3,4,5 >30 <1.0 >-20,typical>-16 0.4 >30 >27 >19 >20 <-153 67 4.7 1710-1880 19.0/16.9 1710-2170 1850-1990 19.2/17.1 Dual slant 45 50 <1.4:1 66 4.4 0-5.5 >18,18,18,16,16,14,@0,1,2,3,4,5 >30 <1.0 >-20,typical>-16 0.4 >30 >27 >19 >17 <-153 250 500 >18,18,18,16,16,14,@0,1,2,3,4,5 >30 <1.0 >-20,typical>-16 0.4 >30 >27 >21 >12 <-160 65 4.2 1920-2170 19.5/17.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1934x167x89.5 (64x6x3) Pre-mounted standard brackets 14 (31) 8.5 (18.7) 416 42 (93) 55 (123) DC grounded ASA Light Grey 2105x200x200 (611x8x8) 15.5 (34.1) 7010.00, 7011.00, 7012.00 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08197 Rev A

Updated: 2010-04-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

251

POWERWAVE

Single Broadband Antennas

7735.00A

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 14.1/12.0 TILT: 0-16 LENGTH: 0.7m (23)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,17,16,15,14@0,4,8,12,16 >30 <1.0 >-24,typical>-18 0.8 >25 >23 >13 >10 -153 86 14.7 1710-1880 13.6/11.5 1710-2170 1850-1990 13.8/11.7 Dual linear 45 50 <1.4:1 86 13.4 0-16 >18,17,16,15,14@0,4,8,12,16 >30 <1.0 >-24,typical>-18 0.8 >25 >23 >13 >10 -153 250 500 >18,17,16,15,14@0,4,8,12,16 >30 <1.0 >-24,typical>-18 0.8 >25 >23 >12 >10 <-160 87 12.2 1920-2170 14.1/12.0

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 709x167x89.5 (23x6x3) Pre-mounted standard brackets 9.7 (21.3) 6 (13.2) 133 42 (93) 55 (123) DC grounded ASA Light Grey 880x200x200 (211x8x8) 13 (28.6) 8110.40. 8110.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08198 Rev A

Updated: 2010-06-30

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

252

POWERWAVE

Single Broadband Antennas

7720.00

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.6/13.5 TILT: 0-16 LENGTH: 0.7m (23)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >17,16,16,15,15@0,4,8,12,16 >30 <1.5 >-29,typical>-25 0.5 >30 >25 >15 >15 <-153 67 14.1 1710-1880 15.0/12.9 1710-2170 1850-1990 15.1/13.0 Dual linear 45 50 <1.4:1 65 13.5 0-16 >17,16,16,15,15@0,4,8,12,16 >30 <1.5 >-29,typical>-25 0.5 >30 >25 >15 >15 <-153 250 500 >17,16,16,15,15@0,4,8,12,16 >30 <1.5 >-29,typical>-25 0.5 >30 >25 >18 >13 <-160 64 12.5 1920-2170 15.6/13.5

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 709x167x89.5 (23x6x3) Pre-mounted standard brackets 8.2 (18) 4.5 (9.9) 133 42 (93) 55 (123) DC grounded ASA Light Grey 880x200x200 (211x8x8) 11.5 (25.3) 8110.40, 8110.10 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08194 Rev A

Updated: 2010-04-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

253

POWERWAVE

Single Broadband Antennas

7700.00

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.8/13.7 TILT: 0 LENGTH: 0.7m (23)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19 >30 <1.0 >-20,typical>-18 0.6 >30 >26 >17 >17 <-153 67 14.7 1710-1880 15.1/13.0 1710-2170 1850-1990 15.5/13.4 Dual linear 45 50 <1.4:1 66 13.8 0 >19 >30 <1.0 >-20,typical>-18 0.6 >30 >26 >17 >15 <-153 250 500 >19 >30 <1.0 >-20,typical>-18 0.6 >30 >26 >19 >11 <-160 64 12.8 1920-2170 15.8/13.7

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 709x167x89.5 (23x6x3) Pre-mounted standard brackets 6.7 (14.8) 3 (6.6) 133 42 (93) 55 (123) DC grounded ASA Light Grey 880x200x200 (211x 8x 8) 10 (22) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08189 Rev A

Updated: 2010-10-22

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

254

POWERWAVE

Single Broadband Antennas

7740.00A

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.7/14.6 TILT: 0-8 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,17,15,15,14@0,2,4,6,8 30 <1.0 >-24,typical>-18 0.4 >29 >23 >14 >10 <-153 86 7.1 1710-1880 16.2/14.1 1710-2170 1850-1990 16.4/14.3 Dual linear 45 50 <1.4:1 86 6.6 0-8 >18,17,15,15,14@0,2,4,6,8 30 <1.0 >-24,typical>-18 0.4 >29 >23 >14 >10 <-153 250 500 >18,17,15,15,14@0,2,4,6,8 30 <1.0 >-24,typical>-18 0.4 >29 >23 >12 >10 <-160 86 6.3 1920-2170 16.7/14.6

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1309x167x89.5 (43x6x3) Pre-mounted standard brackets 11.7 (25.7) 8 (17.6) 281 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1480x200x200 (410x8x8) 15.5 (34.1) 8110.40. 8110.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / May 07 2010

Updated: 2010-06-30

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

255

POWERWAVE

Single Broadband Antennas

7745.00A

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 17.9/15.8 TILT: 0-5.5 LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,18,16,16,14,14,@0,1,2,3,4,5 >30 <1.0 >-24,typical>-18 0.3 >29 >23 >14 >10 <-153 86 4.7 1710-1880 17.5/15.4 1710-2170 1850-1990 17.6/15.5 Dual linear 45 50 <1.4:1 86 4.5 0-5.5 >18,18,16,16,14,14,@0,1,2,3,4,5 >30 <1.0 >-24,typical>-18 0.3 >29 >23 >14 >10 <-153 250 500 >18,18,16,16,14,14,@0,1,2,3,4,5 >30 <1.0 >-24,typical>-18 0.3 >29 >23 >12 >10 <-160 86 4.2 1920-2170 17.9/15.8

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1934x167x89.5 (64x6x3) Pre-mounted standard brackets 15.9 (35) 10.4 (22.9) 416 42 (93) 55 (123) DC grounded ASA Light Grey 2105x200x200 (611x8x8) 18 (39.6) 8110.40. 8110.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08200 Rev A

Updated: 2010-06-30

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

256

Single Broadband Antennas

POWERWAVE

Low Broadband Cross Polarized Antennas, 806-960 MHz

Single Broadband Antennas


Cross Polarized Low Broadband Cross Polarized Antennas, 806-960 MHz

Horizontal Beamwidth Gain dBi dBd 65 65 65 65 65 65 90 90 65 65 65 65 65 65 65 65 65 66 90 90 90 90 90 90 90 90 90 14.6/12.5, 15/12.9 17.1/15.0, 17.5/15.4 17.7/15.6, 18.5/46.4
16.5/14.4, 17.0/14.9

Tilt 2-12 0-7.5 0-0.5 0 0 6 0-0.5 0 FET MET FET FET FET MET FET FET FET MET MET FET FET FET FET MET FET FET MET

Length 1.3m (4'3") 2.0m (6'6") 2.6m (8'6") 2.0m (6'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 1.3m (4'3") 1.3m (4'3") 2.0m (6'6") 2.0m (6'6") 2.0m (6'6") 2.0m (6'6") 2.0m (6'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 1.3m (4'3") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 2.0m (6'6") 2.0m (6'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6")

Part Number 5471.00 5472.00 5473.00 5477.00 5478.00 5478.06 5483.00 5488.00 7476.06 7471.00 7477.00 7477.02 7478.00 7472.00 7477.06 7478.02 7478.06 7473.00 7481.00 7486.00 7486.02 7486.06 7487.00 7482.00 7488.00 7488.02 7483.00

Page 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285

17.4/15.3, 18.1/16.0 17.4/15.2, 18.0/15.8


16.6/14.5, 17.0/14.9 16.6/14.5, 17.1/15.0

14.6/12.5, 15.1/13 14.6/12.5, 15/12.9 15.6/13.5, 16.2/14.1 15.8/13.7, 16.3/14.2 16.9/14.8, 17.3/15.2 16/13.9, 16.5/14.4 16/13.9, 16.5/14.4 17/14.9, 17.4/15.3 17/14.9, 17.4/15.3 17.2/15.1, 17.5/15.4 13.5/11.4, 14/11.9 13.5/11.4, 14/11.9 13.6/11.5, 14.1/12 13.6/11.5, 14/11.9 14.8/12.7, 15.4/13.3 14.8/12.7, 15.5/13.4 15.8/13.7, 16.3/14.2 15.8/13.7, 16.3/14.2 15.9/13.8, 16.3/14.2

257

Single Broadband Antennas

POWERWAVE

Low Broadband Cross Polarized Antennas, 806-960 MHz

Single Broadband Antennas


Cross Polarized Low Broadband Cross Polarized Antennas, 806-960 MHz

Horizontal Beamwidth Gain dBi dBd 90 90 90 15.9/13.8, 16.4/14.3 15/12.9, 15.5/13.4 15/12.9, 15.5/13.4

Tilt FET FET FET

Length 2.6m (8'6") 2.0m (6'6") 2.0m (6'6")

Part Number 7488.06 7487.02 7487.06

Page 286 287 288

258

POWERWAVE

Single Broadband Antennas

5471.00

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.6/12.5, 15.0/12.9 TILT: 2-12 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,18,17@2,7,12 30 <2.0 >-25 1 >25 >24 >10 <-150 400 800 65 15.3 2 - 12 >19,18,17@2,7,12 30 <2.0 >-25 1 >25 >25 >10 806-896 14.6/12.5 Dual linear 45 50 1.5:1 65 14.2 806-960 870-960 15.0/12.9

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1270x280x125 (42x11x4) Pre-mounted heavy duty brackets 14.5 (31.9) 9 (19.8) 367 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 1475x355x255 (410x12x10) 18.5 (40.7) 8110.10, 8110.40 7256.00, 7454.00A, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-07-06

259

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

5472.00

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.1/15.0, 17.5/15.4 TILT: 0-7.5 LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,4,7 30 <2.0 <-18 0.5 >30 >25 >11 <-150 400 800 66 9.6 0 - 7.5 >20,17,15@0,4,7 30 <2.0 <-18 0.5 >30 >25 >11 806-896 17.1/15.0 Dual linear 45 50 1.5:1 64 9.2 806-960 870-960 17.5/15.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2080x280x125 (68x11x4) Pre-mounted heavy duty brackets 20 (44) 14.5 (31.9) 664 / 102 / 798 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2225x355x255 (73x12x10) 24.5 (54) 8110.10 (AISG1.1), 8110.40 (AISG2.0) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-09-22

260

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

5473.00

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.7/15.6, 18.5/16.4 TILT: 0-5.5 LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,2,5 >30 <2.0 >-18 0.3 >30 >25 >11 <-150 400 800 67 7.5 0-5.5 >20,17,15@0,2,5 >30 <2.0 >-18 0.3 >30 >25 >11 806-896 17.7/15.6 Dual linear 45 50 1.5:1 64 7 806-960 870-960 18.5/16.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 21 (46.3) 15.5 (34.2) 835 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2725x355x255 (811x12x10) 25 (55.1) 8110.10, 8110.40 7256.00, 7454.00A, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-09-22

261

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

5477.00

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.5/14.4, 17.0/14.9 TILT: 0 LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-18 0.3 >30 >26 >20 >13 <-150 400 800 66 9.8 0 >20 >30 <1.0 >-18 0.2 >34 >28 >20 >12 806-896 16.5/14.4 Dual linear 45 50 1.4:1 64 9.2 806-960 880-960 17.0/14.9

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2020x280x125 (67x11x4) Pre-mounted heavy duty brackets 18.5 (40.7) 13.0 (28.6) 664 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2225x355x255 (73x12x10) 23 (50.7) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-07-06

262

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

5478.00

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.4/15.3, 18.1/16.0 TILT: 0 LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-18 0.3 >31 >29 >20 >12 <-150 400 800 66 7.3 0 >20 >30 <1.0 >-18 0.3 >36 >29 >20 >12 806-896 17.4/15.3 Dual linear 45 50 1.4:1 64 7.0 806-960 880-960 18.1/16.0

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 22.5 (49.6) 17 (37.4) 835 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2725x355x255 (811x12x10) 27.5 (60.6) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-07-06

263

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

5478.06

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.4/15.2, 18.0/15.8 TILT: 6 LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >15 30 <2.0 <-20 0.5 >30 >28 >20 >12 <-150 300 600 68 7.5 6 >15 30 <1.0 <-20 0.5 >30 >27 >20 >12 806-896 17.4/15.2 Dual linear 45 50 1.4:1 64 7.0 806-960 880-960 18.0/15.8

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 19.7 (41.4) 14.5 (30.5) 835 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2725x355x255 (811x12x10) 25.5 (53.5) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-07-06

264

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

5483.00

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.6/14.5, 17.0/14.9 TILT: 0-5.5 LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,2,5 >30 <1.0 >-23 0.3 >27 >22 >21 >10 <-150 400 600 90 7.5 0 - 5.5 >20,17,15@0,2,5 >30 <1.0 >-21 0.3 >28 >22 >21 >10 806-896 16.6/14.5 Dual linear 45 50 <1.4:1 90 6.9 806-960 870-960 17.0/14.9

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 26.5 (58.4) 21 (46.2) 835 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2725x355x255 (811x12x10) 31.5 (69.4) 8110.10, 8110.40 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-07-16

265

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

5488.00

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.6/14.5, 17.1/15.0 TILT: 0 LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-18 0.2 >27 >22 >20 >10 <-150 400 600 87 7.6 0 >20 >30 <1.0 >-18 0.1 >27 >22 >20 >10 806-896 16.6/14.5 Dual linear 45 50 <1.4:1 84 7.0 806-960 870-960 17.1/15.0

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 24.5 (54) 19 (41.8) 835 42 (93) 55 (123) DC grounded -40C to +60C PVC Light Grey 2725x355x255(811x12x10) 29.5 (65) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-07-06

266

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7476.06

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.6/12.5, 15.1/13 TILT: 6 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19 30 <1.0 <-25 1 >30 >25 >12 <-150 400 800 66 15.3 6 >19 30 <1.0 <-25 1 >30 >25 >12 806-896 14.6/12.5 Dual linear 45 50 1.4:1 64 13.9 806-960 880-960 15.1/13

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1270x280x125 (42x11x4) Pre-mounted heavy duty brackets 14 (30.8) 8.5 (18.7) 367 42 (93) 55 (123) DC grounded GRP Light Grey 1475x355x255 (410x12x10) 18 (39.6) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08165 Rev A

Updated: 2010-04-09

267

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7471.00

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.6/12.5, 15/12.9 TILT: 2-12 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,18,17@2,7,12 30 <2.0 <-25 1 >25 >24 >10 <-150 400 800 65 15.3 2-12 >19,18,17@2,7,12 30 <2.0 <-25 1 >25 >25 >10 806-896 14.6/12.5 Dual linear 45 50 1.5:1 65 14.2 806-960 870-960 15/12.9

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1330x280x125 (44x11x4) Pre-mounted heavy duty brackets 14.5 (31.9) 9 (19.8) 367 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 1475x355x255 (410x12x10) 18.5 (40.7) 8110.40. 8110.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08184 Rev A

Updated: 2010-04-27

268

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7477.00

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.6/13.5, 16.2/14.1 TILT: 0 LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 30 <1.0 <-18 0.5 >30 >25 >12 <-150 400 800 66 9.5 0 >20 30 <1.0 <-18 0.5 >30 >25 >12 806-896 15.6/13.5 Dual linear 45 50 1.4:1 64 9 806-960 880-960 16.2/14.1

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2020x280x125 (67x11x4) Pre-mounted heavy duty brackets 18.5 (40.7) 13 (28.6) 664 42 (93) 55 (123) DC grounded GRP Light Grey 2225x355x255 (73x12x10) 23 (50.7) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08166 Rev A

Updated: 2010-04-09

269

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7477.02

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.8/13.7, 16.3/14.2 TILT: 2 LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 30 <2.0 <-18 0.5 >30 >25 >12 <-150 400 800 66 9.5 2 >20 30 <2.0 <-18 0.5 >30 >25 >12 806-896 15.8/13.7 Dual linear 45 50 1.4:1 64 9 806-960 880-960 16.3/14.2

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 2020x280x125 (67x11x4) Pre-mounted heavy duty brackets 18.5 (40.7) 13 (28.6) 664 42 (93) 55 (123) DC grounded GRP Light Grey 2225x355x255 (73x12x10) 23 (50.7) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08167 Rev A

Updated: 2010-04-09

270

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7478.00

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.9/14.8, 17.3/15.2 TILT: 0 LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 30 <1.0 >-18 0.3 >30 >25 >12 <-150 400 800 66 7.3 0 >20 30 <1.0 >-18 0.3 >30 >25 >12 806-896 16.9/14.8 Dual linear 45 50 1.4:1 64 7 806-960 880-960 17.3/15.2

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 22.5 (49.6) 17 (37.4) 835 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2725x355x255 (811x12x10) 27.5 (60.6) 7256.00, 7454.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08169 Rev A

Updated: 2010-12-02

271

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7472.00

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16/13.9, 16.5/14.4 TILT: 0-7.5 LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,4,7 30 <2.0 <-18 0.5 >30 >25 >11 <-150 400 800 67 10 0-7.5 >20,17,15@0,4,7 30 <2.0 <-18 0.5 >30 >25 >11 806-896 16/13.9 Dual linear 45 50 1.4:1 64 9 806-960 880-960 16.5/14.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2080x280x125 (68x11x4) Pre-mounted heavy duty brackets 20 (44) 14.5 (31.9) 664 42 (93) 55 (123) DC grounded GRP Light Grey 2225x355x255 (73x12x10) 24.5 (54) 8110.40. 8110.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08185 Rev A

Updated: 2010-04-09

272

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7477.06

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16/13.9, 16.5/14.4 TILT: 6 LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 30 <1.0 <-18 0.5 >30 >25 >12 <-150 400 800 66 9.5 6 >20 30 <1.0 <-18 0.5 >30 >25 >12 806-896 16/13.9 Dual linear 45 50 1.4:1 64 9 806-960 880-960 16.5/14.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2020x280x125 (67x11x4) Pre-mounted heavy duty brackets 18.5 (40.7) 13 (28.6) 664 42 (93) 55 (123) DC grounded GRP Light Grey 2225x355x255 (73x12x10) 23 (50.7) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08168 Rev A

Updated: 2010-04-09

273

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7478.02

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17/14.9, 17.4/15.3 TILT: 2 LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 30 <1.0 <-18 0.3 >30 >25 >12 <-150 400 800 66 7.3 2 >20 30 <1.0 <-18 0.3 >30 >25 >12 806-896 17/14.9 Dual linear 45 50 1.4:1 64 7 806-960 880-960 17.4/15.3

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 22.5 (49.6) 17 (37.4) 835 42 (93) 55 (123) DC grounded GRP Light Grey 2725x355x255 (811x12x10) 27.5 (60.6) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08170 Rev A

Updated: 2010-04-09

274

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7478.06

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17/14.9, 17.4/15.3 TILT: 6 LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 30 <1.0 <-18 0.3 >30 >25 >12 <-150 400 800 66 7.3 6 >20 30 <1.0 <-18 0.3 >30 >25 >12 806-896 17/14.9 Dual linear 45 50 1.4:1 64 7 806-960 880-960 17.4/15.3

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 22.5 (49.6) 17 (37.4) 835 42 (93) 55 (123) DC grounded GRP Light Grey 2725x355x255 (811x12x10) 27.5 (60.6) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08171 Rev A

Updated: 2010-04-09

275

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7473.00

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.2/15.1, 17.5/15.4 TILT: 0-5.5 LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,2,5 30 <2.0 <-18 0.3 >30 >25 >11 <-150 400 800 67 7.5 0-5.5 >20,17,15@0,2,5 30 <2.0 <-18 0.3 >30 >25 >11 806-896 17.2/15.1 Dual linear 45 50 1.4:1 64 7 806-960 880-960 17.5/15.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2580x280x125 (84x11x4) Pre-mounted heavy duty brackets 24 (52.9) 18.5 (40.7) 835 42 (93) 55 (123) DC grounded GRP Light Grey 2725x355x255 (811x12x10) 28 (61.7) 8110.40. 8110.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08186 Rev A

Updated: 2010-04-09

276

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7481.00

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.5/11.4, 14/11.9 TILT: 2-12 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,18,17@2,7,12 >30 <2 <-18 0.5 >27 >23 >9 -150 400 600 87 15 2-12 >19,18,17@2,7,12 >30 <2 <-18 0.5 >27 >23 >9 806-896 13.5/11.4 Dual linear 45 50 <1.4:1 85 14 806-960 870-960 14/11.9

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1270x280x125 (42x11x4) Pre-mounted heavy duty brackets 18.5 (40.7) 13 (28.6) 367 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 1475x355x255 (410x12x10) 22.5 (49.6) 8110.40. 8110.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08183 Rev A

Updated: 2010-04-27

277

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7486.00

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.5/11.4, 14/11.9 TILT: 0 LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-21 0.6 >27 >22 >21 >10 <-150 400 600 87 15.5 0 >20 >30 <1.0 >-25 0.4 >27 >22 >21 >11 806-896 13.5/11.4 Dual linear 45 50 <1.4:1 84 14 806-960 880-960 14/11.9

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1270x280x125 (42x11x4) Pre-mounted heavy duty brackets 16.5 (36.3) 11 (24.2) 367 42 (93) 55 (123) DC grounded GRP Light Grey 1475x355x255 (410x12x10) 20.5 (45.1) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08172 Rev A

Updated: 2010-04-09

278

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7486.02

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.6/11.5, 14.1/12 TILT: 2 LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-23 0.4 >28 >22 >21 >10 <-150 400 600 87 15.4 2 >20 >30 <1.0 >-25 0.4 >28 >22 >21 >11 806-896 13.6/11.5 Dual linear 45 50 1.4:1 84 14 806-960 880-960 14.1/12

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1270x280x125 (42x11x4) Pre-mounted heavy duty brackets 16.5 (36.3) 11 (24.2) 367 42 (93) 55 (123) DC grounded GRP Light Grey 1475x355x255 (410x12x10) 20.5 (45.1) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08173 Rev A

Updated: 2010-04-09

279

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7486.06

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.6/11.5, 14/11.9 TILT: 6 LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18 >30 <1.0 >-25 0.6 >27 >22 >22 >10 <-150 400 600 87 15.5 6 >18 >30 <1.0 >-25 0.6 >28 >22 >22 >11 806-896 13.6/11.5 Dual linear 45 50 <1.4:1 85 13.9 806-960 880-960 14/11.9

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1270x280x125 (42x11x4) Pre-mounted heavy duty brackets 16.5 (36.3) 11 (24.2) 367 42 (93) 55 (123) DC grounded GRP Light Grey 1475x355x255 (410x12x10) 20.5 (45.1) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08174 Rev A

Updated: 2010-04-09

280

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7487.00

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 14.8/12.7, 15.4/13.3 TILT: 0 LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-20 0.1 >28 >22 >20 >10 <-150 400 600 87 9.7 0 >20 >30 <1.0 >-18 0.2 >29 >22 >20 >10 806-896 14.8/12.7 Dual linear 45 50 <1.4:1 84 9 806-960 880-960 15.4/13.3

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2020x280x125 (67x11x4) Pre-mounted heavy duty brackets 20.5 (45.1) 15 (33) 664 42 (93) 55 (123) DC grounded GRP Light Grey 2225x355x255 (73x12x10) 25 (55.1) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08175 Rev A

Updated: 2010-04-09

281

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7482.00

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 14.8/12.7, 15.5/13.4 TILT: 0-7.5 LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,4,7 >30 <1.0 >-25 0.4 >27 >22 >20 >10 <-150 400 600 88 9.6 0-7.5 >20,17,15@0,4,7 >30 <1.0 >-20 0.4 >27 >22 >20 >10 806-896 14.8/12.7 Dual linear 45 50 <1.4:1 86 9 806-960 870-960 15.5/13.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2020x280x125 (67x11x4) Pre-mounted heavy duty brackets 22.5 (49.6) 17 (37.4) 664 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2225x355x255 (73x12x10) 27 (59.5) 8110.40. 8110.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08187 Rev A

Updated: 2010-04-27

282

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7488.00

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15.8/13.7, 16.3/14.2 TILT: 0 LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-18 0.2 >27 >22 >21 >10 <-150 400 600 87 7.6 0 >20 >30 <1.0 >-18 0.1 >27 >22 >21 >10 806-896 15.8/13.7 Dual linear 45 50 <1.4:1 84 7 806-960 880-960 16.3/14.2

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 24.5 (54) 19 (41.8) 835 42 (93) 55 (123) DC grounded GRP Light Grey 2725x355x255 (811x12x10) 29.5 (65) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08178 Rev A

Updated: 2010-04-09

283

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7488.02

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15.8/13.7, 16.3/14.2 TILT: 2 LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-18 0.3 >26 >22 >20 >10 <-150 400 600 87 7.6 2 >20 >30 <1.0 >-18 0.2 >27 >22 >20 >10 806-896 15.8/13.7 Dual linear 45 50 <1.4:1 84 7 806-960 880-960 16.3/14.2

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 24.5 (54) 19 (41.8) 835 42 (93) 55 (123) DC grounded GRP Light Grey 2725x355x255 (811x12x10) 29.5 (65) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08179 Rev A

Updated: 2010-04-09

284

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7483.00

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15.9/13.8, 16.3/14.2 TILT: 0-5.5 LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20,17,15@0,2,5 >30 <1.0 >-23 0.3 >27 >22 >21 >10 <-150 400 600 87 7.5 0-5.5 >20,17,15@0,2,5 >30 <1.0 >-21 0.3 >28 >22 >21 >10 806-896 15.9/13.8 Dual linear 45 50 <1.4:1 84 6.9 806-960 880-960 16.3/14.2

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 26.5 (58.4) 21 (46.2) 835 42 (93) 55 (123) DC grounded GRP Light Grey 2725x355x255 (811x12x10) 31.5 (69.4) 8110.40. 8110.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08188 Rev A

Updated: 2010-04-09

285

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7488.06

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15.9/13.8, 16.4/14.3 TILT: 6 LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-20 0.1 >26 >22 >20 >10 <-150 400 600 87 7.6 6 >20 >30 <1.0 >-20 0.2 >27 >22 >20 >10 806-896 15.9/13.8 Dual linear 45 50 <1.4:1 84 7 806-960 880-960 16.4/14.3

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2520x280x125 (83x11x4) Pre-mounted heavy duty brackets 24.5 (54) 19 (41.8) 835 42 (93) 55 (123) DC grounded GRP Light Grey 2725x355x255 (811x12x10) 29.5 (65) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08180 Rev A

Updated: 2010-04-09

286

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7487.02

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15/12.9, 15.5/13.4 TILT: 2 LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >20 >30 <1.0 >-20 0.3 >28 >22 >20 >10 <-150 400 600 87 9.7 2 >20 >30 <1.0 >-18 0.2 >29 >22 >20 >10 806-896 15/12.9 Dual linear 45 50 <1.4:1 84 9 806-960 880-960 15.5/13.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2020x280x125 (67x11x4) Pre-mounted heavy duty brackets 20.5 (45.1) 15 (33) 664 42 (93) 55 (123) DC grounded GRP Light Grey 2225x355x255 (73x12x10) 25 (55.1) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08176 Rev A

Updated: 2010-04-09

287

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Broadband Antennas

7487.06

Low Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15/12.9, 15.5/13.4 TILT: 6 LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >17 >30 <1.0 >-20 0.1 >28 >22 >20 >10 <-150 400 600 87 9.7 6 >20 >30 <1.0 >-20 0.2 >28 >22 >20 >10 806-896 15/12.9 Dual linear 45 50 <1.4:1 84 9 806-960 880-960 15.5/13.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2020x280x125 (67x11x4) Pre-mounted heavy duty brackets 20.5 (45.1) 15 (33) 664 42 (93) 55 (123) DC grounded GRP Light Grey 2225x355x255 (73x12x10) 25 (55.1) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08177 Rev A

Updated: 2010-04-09

288

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Single Broadband Antennas

POWERWAVE

Low Broadband Cross Polarized Antennas, 698-894 MHz

Single Broadband Antennas


Cross Polarized Low Broadband Cross Polarized Antennas, 698-894 MHz

Horizontal Beamwidth 65 65 65 65 65 65 65

Gain dBi dBd 14.5/12.4 14.5/12.4 16.0/13.9 16.0/13.9 16.0/13.9 17.5/15.4 17.5/15.4

Tilt 2 4 2 4 6 2 4

Length 1.2m(48) 1.2m(48) 1.8m(72) 1.8m(72) 1.8m(72) 2.4m(96) 2.4m(96)

Part Number P65-15-XL-2 P65-15-XL-4 P65-16-XL-2 P65-16-XL-4 P65-16-XL-6 P65-17-XL-2 P65-17-XL-4

Page 290 291 292 293 294


295 296

289

POWERWAVE

Single Broadband Antennas

P65-15-XL-2

Very Low Broadband Antennas

POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.5/12.4 TILT: 2 LENGTH: 1.2m (48)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Tracking, horizontal plane 60 (dB) Isolation between inputs (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) > 15 <2 > 30 < 0.5 > 30 > 25 > 15 > 10 -153 400 800 68 16.5 2 > 15 <2 > 30 < 0.5 > 30 > 25 > 15 > 10 698-806 14.0/11.9 Dual Linear +/- 45 50 < 1.33:1 65 15.5 698-894 806-894 14.5/12.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, in (mm) Mounting Weight, with brackets, lbs (kg) Weight, without brackets, lbs (kg)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)

2 X 7/16 DIN Female Bottom 48x12x5 (1219x305x125) Pre-mounted Tilt Brackets 33 (15) 22 (10) 400 100 (45) 125 (55) DC Ground PVC 58 x 16 x 10 (1475 x 400 x 255) Light Grey 44 (22) N/A 7256.00, 7454.00, 2210.00

Maximum operational wind speed, mph (m/s) Survival wind speed, mph (m/s) Lightning protection Operating Temperature Radome material Packet size, HxWxD, in (mm) Radome colour Shipping weight, lbs (kg) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2008-08-27

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

290

POWERWAVE

Single Broadband Antennas

P65-15-XL-4

Very Low Broadband Antennas

POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.5/12.4 TILT: 4 LENGTH: 1.2m (48)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Tracking, horizontal plane 60 (dB) Isolation between inputs (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) > 15 <2 > 30 < 0.5 > 30 > 25 > 15 > 10 -153 400 800 68 16.5 4 > 15 <2 > 30 < 0.5 > 30 > 25 > 15 > 10 698-806 14.0/11.9 Dual Linear +/- 45 50 < 1.33:1 65 15.5 698-894 806-894 14.5/12.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, in (mm) Mounting Weight, with brackets, lbs (kg) Weight, without brackets, lbs (kg)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)

2 X 7/16 DIN Female Bottom 48x12x5 (1219x305x125) Pre-mounted Tilt Brackets 33 (15) 22 (10) 400 100 (45) 125 (55) DC Ground PVC 58 x 16 x 10 (1475 x 400 x 255) Light Grey 44 (20) N/A 7256.00, 7454.00, 2210.00

Maximum operational wind speed, mph (m/s) Survival wind speed, mph (m/s) Lightning protection Operating Temperature Radome material Packet size, HxWxD, in (mm) Radome colour Shipping weight, lbs (kg) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2008-08-27

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

291

POWERWAVE

Single Broadband Antennas

P65-16-XL-2

Very Low Broadband Antennas

POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.0/13.9 TILT: 2 LENGTH: 1.8m (72)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Electrical Downtilt Range Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 698-806 15.5/13.4 Dual Linear +/- 45 50 < 1.33: 1 68 10.5 > 15 > 30 <2 2 < 0.5 > 30 > 25 > 15 > 10 -153 400 800 698-894 806-894 16.0/13.9 Dual Linear +/- 45 50 < 1.33: 1 65 9.5 > 15 > 30 <2 2 < 0.5 > 30 > 25 > 15 > 10

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, in (mm) Mounting Weight, with brackets, lbs (kg) Weight, without brackets, lbs (kg)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)

2 X 7/16 DIN Female Bottom 72 x 12 x 5 (1829 x 305 x 125) Pre-mounted Tilt Brackets 44 (20) 33 (15) 680 100 (45) 125 (55) DC Ground PVC 82 x 16 x 10 (2082 x 400 x 255) Light Grey 55 (25) N/A 7256.00, 7454.00, 2210.00

Maximum operational wind speed, mph (m/s) Survival wind speed, mph (m/s) Lightning protection Operating Temperature Radome material Packet size, HxWxD, in (mm) Radome colour Shipping weight, lbs (kg) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2008-08-27

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

292

POWERWAVE

Single Broadband Antennas

P65-16-XL-4

Very Low Broadband Antennas

POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.0/13.9 TILT: 4 LENGTH: 72

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Electrical Downtilt Range Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 698-806 15.5/13.4 Dual Linear +/- 45 50 < 1.33: 1 68 10.5 > 15 > 30 <2 4 < 0.5 > 30 > 25 > 15 > 10 -153 400 800 < 0.5 > 30 > 25 > 15 > 10 65 9.5 > 15 > 30 <2 698-894 806-894 16.0/13.9

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, in (mm) Mounting Weight, with brackets, lbs (kg) Weight, without brackets, lbs (kg)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)

2 X 7/16 DIN Female Bottom 72 x 12 x 5 (1829 x 305 x 125) Pre-mounted Tilt Brackets 44 (20) 33 (15) 1380 100 (45) 125 (55) DC Ground PVC 82 x 16 x 10 (2082 x 400 x 255) Light Grey 55 (25) N/A 7256.00, 7454.00, 2210.00

Maximum operational wind speed, mph (m/s) Survival wind speed, mph (m/s) Lightning protection Operating Temperature Radome material Packet size, HxWxD, in (mm) Radome colour Shipping weight, lbs (kg) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2008-08-27

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

293

POWERWAVE

Single Broadband Antennas

P65-16-XL-6

Very Low Broadband Antennas

POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.0/13.9 TILT: 6 LENGTH: 1.8m (72)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Electrical Downtilt Range Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 698-806 15.5/13.4 Dual Linear +/- 45 50 < 1.33: 1 68 10.5 > 15 > 30 <2 6 < 0.5 > 30 > 25 > 15 > 10 -153 400 800 698-894 806-894 16.0/13.9 Dual Linear +/- 45 50 < 1.33: 1 65 9.5 > 15 > 30 <2 6 < 0.5 > 30 > 25 > 15 > 10

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, in (mm) Mounting Weight, with brackets, lbs (kg) Weight, without brackets, lbs (kg)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)

2 X 7/16 DIN Female Bottom 72 x 12 x 5 (1829 x 305 x 125) Pre-mounted Tilt Brackets 44 (20) 33 (15) 680 100 (45) 125 (55) DC Ground PVC 82 x 16 x 10 (2082 x 400 x 255) Light Grey 55 (25) N/A 7256.00, 7454.00, 2210.00

Maximum operational wind speed, mph (m/s) Survival wind speed, mph (m/s) Lightning protection Operating Temperature Radome material Packet size, HxWxD, in (mm) Radome colour Shipping weight, lbs (kg) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2008-08-27

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

294

POWERWAVE

Single Broadband Antennas

P65-17-XL-2

Very Low Broadband Antennas

POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.5/15.4 TILT: 2 LENGTH: 2.4m (96)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 698-806 16.5/14.4 Dual Linear +/- 45 50 < 1.33:1 68 8.5 2 > 15 > 30 <2 < 0.5 > 30 > 25 > 15 > 10 -153 400 800 698-894 806-894 17.5/15.4 Dual Linear +/- 45 50 < 1.33:1 65 7.5 2 > 15 > 30 <2 < 0.5 > 30 > 25 > 15 > 10

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, in (mm) Mounting Weight, with brackets, lbs (kg) Weight, without brackets, lbs (kg)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)

2 X 7/16 DIN Female Bottom 96 x 12 x 5 (2438 x 305 x 125) Pre-mounted Tilt Brackets 54 (25) 43 (20) 880 100 (45) 125 (55) DC Ground PVC 107 x 16 x 10 (2725 x 400 x 255) Light Grey 65 (30) N/A 7256.00, 7454.00, 2210.00

Maximum operational wind speed, mph (m/s) Survival wind speed, mph (m/s) Lightning protection Operating Temperature Radome material Packet size, HxWxD, in (mm) Radome colour Shipping weight, lbs (kg) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2008-08-27

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

295

POWERWAVE

Single Broadband Antennas

P65-17-XL-4

Very Low Broadband Antennas

POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.5/15.4 TILT: 4 LENGTH: 2.4m (96)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 698-806 16.5/14.4 Dual Linear +/- 45 50 < 1.33:1 68 8.5 4 > 15 > 30 <2 < 0.5 > 30 > 25 > 15 > 10 -153 400 800 698-894 806-894 17.5/15.4 Dual Linear +/- 45 50 < 1.33:1 65 7.5 4 > 15 > 30 <2 < 0.5 > 30 > 25 > 15 > 10

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, in (mm) Mounting Weight, with brackets, lbs (kg) Weight, without brackets, lbs (kg)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)

2 X 7/16 DIN Female Bottom 96 x 12 x 5 (2438 x 305 x 125) Pre-mounted Tilt Brackets 54 (25) 43 (20) 880 100 (45) 125 (55) DC Ground PVC 107 x 16 x 10 (2725 x 400 x 255) Light Grey 65 (30) N/A 7256.00, 7454.00, 2210.00

Maximum operational wind speed, mph (m/s) Survival wind speed, mph (m/s) Lightning protection Operating Temperature Radome material Packet size, HxWxD, in (mm) Radome colour Shipping weight, lbs (kg) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2008-08-27

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

296

Single Broadband Antennas

POWERWAVE

ALP Broadband Vertical Polarized Antennas, 806-960 MHz

Single Broadband Antennas


Vertical Polarized ALP Broadband Vertical Polarized Antennas, 806-960 MHz

Horizontal Beamwidth 80

Gain dBi dBd 14.5/12.4

Tilt FET

Length 1.3m (4'4")

Part Number 7824.00

Page 298

297

POWERWAVE

Single Broadband Antennas

7824.00

ALP Broadband Vertical Polarized

POLARIZATION: Vertical Pol FREQUENCY (MHz): 806-960 HORIZONTAL BEAM WIDTH (): 80 GAIN (dBi/dBd): 14.5/12.4 TILT: FET LENGTH: 1.3m (44)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) >18 none <0.2 >28 <-146 500 80 15 0 >18 none <0.2 >28 806-896 14.5/12.4 Linear vertical 50 <1.4:1 80 15 806-960 880-960 14.5/12.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Back 1320x330x290 (44x11x11) Pre-mounted heavy duty brackets 12.9 (28.4) 7.4 (16.3) 490 42 (93) 55 (123) DC grounded PVC Light Gray 1346x360x335 (45x12x11) 13 (28.6) 7256.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D_

Updated: 2010-03-31

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

298

Dual Broadband Antennas

POWERWAVE

Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz

Dual Broadband Antennas


Cross Polarized Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz

Horizontal Beamwidth 65 65 65 65 65 90 90

Gain dBi dBd 17.7/15.6, 17.7/15.6, 17.9/15.8 17.7/15.6, 17.9/15.8, 18.1/16 18/15.9 18/15.9 19/16.9, 19.2/17.1, 19.4/17.3 16.1/14, 16.2/14.1, 16.5/14.4 17.4/15.3, 17.5/15.4, 17.7/15.6

Tilt MET MET MET MET MET MET MET

Length 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 2.0m (6'6") 1.3m (4'3") 2.0m (6'6")

Part Number 7760.02 7760.00 7760.03 7760.06 7765.00 7762.00 7766.00

Page 300 301 302 303 304 305 306

299

POWERWAVE

Dual Broadband Antennas

7760.02

Dual High Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8 TILT: 2-10 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,19,18,17,16@2,4,6,8,10 >30 <2.0 >-27,typical>-18 0.5 >28 >28 >16 >16 <-153 <-160 67 7.1 1710-1880 17.7/15.6 1710-2170 1850-1990 17.7/15.6 Dual linear 45 50 <1.4:1 65 6.8 2-10 >19,19,18,17,16@2,4,6,8,10 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >16 >13 <-153 <-160 250 1000 >19,19,18,17,16@2,4,6,8,10 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >20 >10 <-153 <-160 63 6.2 1920-2170 17.9/15.8

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 1320x343x100 (44x11x3) Pre-mounted heavy duty brackets 19.5 (42.9) 14 (30.8) 520 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1430x400x200 (48x13x7) 27.5 (60.6) 8110.40. 8110.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-05-28

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

300

POWERWAVE

Dual Broadband Antennas

7760.00

Dual High Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0 TILT: 0-8 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >22,20,18,16,14@0,2,4,6,8 >30 <2.0 >-27,typical>-18 0.5 >28 >28 >16 >16 <-153 <-160 67 7.1 1710-1880 17.7/15.6 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 65 6.8 0-8 >22,20,18,16,14@0,2,4,6,8 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >16 >13 <-153 <-160 250 1000 >22,20,18,16,14@0,2,4,6,8 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >20 >10 <-153 <-160 64 6.2 1920-2170 18.1/16.0

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 1320x343x100 (44x11x3) Pre-mounted heavy duty brackets 19.5 (42.9) 14 (30.8) 520 42 (93) 55 (123) DC grounded ASA Light Grey 1430x430x250 (48x13x9) 23.5 (51.8) 8110.40. 8110.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08204 Rev A

Updated: 2010-04-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

301

POWERWAVE

Dual Broadband Antennas

7760.03

Dual High Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8 TILT: 2-10/6-14 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >19,19,18,17,16@2,4,6,8,10 >30 <2.0 >-27,typical>-18 0.5 >28 >28 >16 >16 <-153 67 7.1 1710-1880 17.7/15.6 1710-2170 1850-1990 17.7/15.6 Dual linear 45 50 <1.4:1 65 6.8 2 to 10 and 6 to 14 >19,19,18,17,16@2,4,6,8,10 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >16 >13 <-153 250 1000 >19,19,18,17,16@2,4,6,8,10 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >20 >10 <-160 63 6.2 1920-2170 17.9/15.8

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 1320x343x100 (44x11x3) Pre-mounted heavy duty brackets 19.5 (42.9) 14 (30.8) 520 42 (93) 55 (123) DC grounded ASA Light Grey 1430x400x200 (48x13x7) 27.5 (60.6) 8110.40. 8110.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08204 Rev. A

Updated: 2010-04-09

302

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Broadband Antennas

7760.06

Dual High Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8 TILT: 6-14 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >17,16@6,8,10 >30 <2.0 >-27,typical>-18 0.5 >28 >28 >16 >16 <-153 67 7.1 1710-1880 17.7/15.6 1710-2170 1850-1990 17.7/15.6 Dual linear 45 50 <1.4:1 65 6.8 6-14 >17,16@6,8,10 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >16 >13 <-153 250 1000 >17,16@6,8,10 >30 <2.0 >-24,typical>-18 0.5 >28 >28 >20 >10 <-160 63 6.2 1920-2170 17.9/15.8

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom x343x100 (44x11x3) Pre-mounted heavy duty brackets 19.5 (42.9) 14 (30.8) 520 42 (93) 55 (123) DC grounded ASA Light Grey 1430x400x200 (48x13x7) 27.5 (60.6) 8110.40. 8110.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08204 Rev. A

Updated: 2010-04-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

303

POWERWAVE

Dual Broadband Antennas

7765.00

Dual High Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 19.0/16.9, 19.2/17.1, 19.4/17.3 TILT: 0-5.5 LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >22,20,18,16,15,13@0,1,2,3,4,5 >30 <2.0 >-22,typical>-18 <0.5 >28 >28 >16 >16 <-153 <-160 67 4.7 1710-1880 19.0/16.9 1710-2170 1850-1990 19.2/17.1 Dual linear 45 50 <1.4:1 65 4.4 0-5.5 >22,20,18,16,15,14@0,1,2,3,4,5 >30 <2.0 >-22,typical>-18 <0.5 >28 >28 >16 >13 <-153 <-160 250 1000 >22,20,18,16,15,14@0,1,2,3,4,5 >30 <2.0 >-22,typical>-18 <0.5 >28 >28 >20 >10 <-153 <-160 63 4.2 1920-2170 19.4/17.3

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 1934x343x100 (64x11x3) Pre-mounted heavy duty brackets 22.5 (49.6) 17 (37.4) 819 42 (93) 55 (123) DC grounded ASA Light Grey 2085x430x250 (610x13x9) 27 (59.5) 8110.40. 8110.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08206 Rev A

Updated: 2010-04-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

304

POWERWAVE

Dual Broadband Antennas

7762.00

Dual High Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.1/14.0, 16.2/14.1, 16.5/14.4 TILT: 0-8 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >17,17,16,15,14@0,2,4,6,8 >30 <2.0 >-25,typical>-18 <0.5 >24 >23 >17 >7 <-153 <-160 89 7.0 1710-1880 16.1/14.0 1710-2170 1850-1990 16.2/14.1 Dual linear 45 50 <1.4:1 93 6.7 0-8 >17,17,16,15,14@0,2,4,6,8 >30 <2.0 >-25,typical>-18 <0.5 >25 >23 >17 >7 <-153 <-160 250 1000 >20,18,17,16,15@0,2,4,6,8 >30 <2.0 >-25,typical>-18 <0.5 >26 >23 >12 >7 <-153 <-160 90 6.3 1920-2170 16.5/14.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 1320x343x100 (44x11x3) Pre-mounted heavy duty brackets 23.5 (51.8) 18 (39.6) 520 42 (93) 55 (123) DC grounded ASA Light Grey 1430x400x200 (48x13x7) 27.5 (60.6) 8110.40. 8110.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08204 Rev A

Updated: 2010-04-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

305

POWERWAVE

Dual Broadband Antennas

7766.00

Dual High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 17.4/15.3, 17.5/15.4, 17.7/15.6 TILT: 0-5.5 LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,18,15,14,13,11@0,1,2,3,4,5 >30 <2.0 >-25,typical>-18 <0.5 >25 >23 >16 >8 <-153 <-160 89 4.7 1710-1880 17.4/15.3 1710-2170 1850-1990 17.5/15.4 Dual linear 45 50 <1.4:1 93 4.4 0-5.5 >20,20,17,16,14,14@0,1,2,3,4,5 >30 <2.0 >-25,typical>-18 <0.5 >25 >23 >16 >8 <-153 <-160 250 1000 >22,20,18,16,15,14@0,1,2,3,4,5 >30 <2.0 >-25,typical>-18 <0.5 >25 >23 >12 >8 <-153 <-160 90 4.2 1920-2170 17.7/15.6

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 1934x343x100 (64x11x3) Pre-mounted heavy duty brackets 27.5 (60.6) 22 (48.5) 819 42 (93) 55 (123) DC grounded ASA Light Grey 2085x430x250 (610x13x9) 32 (70.5) 8110.40. 8110.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08207 Rev. A

Updated: 2010-04-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

306

Dual Broadband Antennas

POWERWAVE

Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz

Dual Broadband Antennas


Cross Polarized Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz

Horizontal Beamwidth 65 65 65 65 65 65 65 65 65 65

Gain dBi dBd 15.2/13.1, 18/15.9 15.2/13.1, 18/15.9 15.2/13.1, 18/15.9 15.2/13.1, 18/15.9 16.7/14.6, 17.6/15.5 16.7/14.6, 17.6/15.5 16.7/14.6, 17.6/15.5 17.3/15.2, 17.8/15.7 17.3/15.2, 17.8/15.7 17.3/15.2, 17.8/15.7

Tilt MET MET MET MET MET MET MET MET MET MET

Length 1.4m (47) 1.4m (47) 1.4m (47) 1.4m (47) 2.0m (6'6") 2.0m (6'6") 2.0m (6'6") 2.6m (8'6") 2.6m (86) 2.6m (86)

Part Number 7750.1ST.0000.00 7750.00 7750.0S0.0000.00 7750.90 7752.90 7752.00 7752.0S0.0000.00 7755.00 7755.90 7755.0S0.0000.00

Page 308 309 310 311 312 313 314 315 316 317

307

POWERWAVE

Dual Broadband Antennas

7750.1ST.0000.00

Dual Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.2/13.1, 18/15.9 TILT: MET LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >27 >24 15 10 <0.33 <-153 300 600
2,4,6,8,10,12

824-960 824-896 14.6/12.5 50 <1.5:1 69 14.9 8 to 18


>18,17,16,16,15,15@ >18,17,16,16,15,15@ 2,4,6,8,10,12 >18,18,16,15,14@ 2,4,6,8

1710-2170 880-960 15.2/13.1 1710-1880 17.5/15.4 1850-1990 17.7/15.6 Dual linear 45 50 <1.5:1 67 13.7 65 6.9 65 6.6 4 to 12
>18,18,16,15,14@ 2,4,6,8 >18,18,16,15,14@ 2,4,6,8

1900-2170 18/15.9

Dual linear 45

62 6.2

30 40

30 <1.0 <-25 0.5 >27 >24 15 8 <0.48

30 <2.0 <-25 0.3 >27 >24 20 7 <0.62

30 <2.0 <-25 0.3 >27 >24 20 >7 <0.62 <-153 <-160 250 600

30 <2.0 <-25 0.3 >27 >24 20 >7 <0.62

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 1408x280x125mm (47x11x4) Pre-mounted heavy duty brackets 17.6 (39) 12.1 (27) 415 42 (93) 55 (123) DC grounded GRP 1550x355x255 (51x12x10) Light Grey 21.5 (47.3) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08201 Rev. A

Updated: 2009-07-28

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

308

POWERWAVE

Dual Broadband Antennas

7750.00

Dual Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.2/13.1, 18/15.9 TILT: 2-12/0-8 LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >27 >24 15 10 <0.33 <-153 300 600
2,4,6,8,10,12

824-960 824-896 14.6/12.5 50 1.5:1 69 14.9 2 - 12


>18,17,16,16,15,15@ >18,17,16,16,15,15@ 2,4,6,8,10,12 >18,18,16,15,14@ 2,4,6,8

1710-2170 870-960 15.2/13.1 1710-1880 17.5/15.4 1850-1990 17.7/15.6 Dual linear 45 50 1.5:1 67 13.7 65 6.9 65 6.6 0-8
>18,18,16,15,14@ 2,4,6,8 >18,18,16,15,14@ 2,4,6,8

1900-2170 18.0/15.9

Dual linear 45

62 6.2

30 40

30 <1.0 <-25 0.5 >27 >24 15 8 <0.48

30 <2.0 <-25 0.3 >27 >24 20 7 <0.62

30 <2.0 <-25 0.3 >27 >24 20 >7 <0.62 <-153 <-160 250 500

30 <2.0 <-25 0.3 >27 >24 20 >7 <0.62

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 1408x280x125mm (47x11x4) Pre-mounted heavy duty brackets 17.6 (39) 12.1 (27) 415 42 (93) 55 (123) DC grounded -40C to +60C GRP 1550x355x255 (51x12x10) Light Grey 21.5 (47.3) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010

Updated: 2009-07-28

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

309

POWERWAVE

Dual Broadband Antennas

7750.0S0.0000.00

Dual Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.2/13.1, 18/15.9 TILT: MET LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >27 >24 15 10 <0.33 <-153 300 600
2,4,6,8,10,12

824-960 824-896 14.6/12.5 50 <1.5:1 69 14.9 2 to 8


>18,17,16,16,15,15@ >18,17,16,16,15,15@ 2,4,6,8,10,12 >18,18,16,15,14@ 2,4,6,8

1710-2170 880-960 15.2/13.1 1710-1880 17.5/15.4 1850-1990 17.7/15.6 Dual linear 45 50 <1.5:1 67 13.7 65 6.9 65 6.6 0 to 8
>18,18,16,15,14@ 2,4,6,8 >18,18,16,15,14@ 2,4,6,8

1900-2170 18/15.9

Dual linear 45

62 6.2

30 40

30 <1.0 <-25 0.5 >27 >24 15 8 <0.48

30 <2.0 <-25 0.3 >27 >24 20 7 <0.62

30 <2.0 <-25 0.3 >27 >24 20 >7 <0.62 <-153 <-160 250 600

30 <2.0 <-25 0.3 >27 >24 20 >7 <0.62

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 1408x280x125mm (47x11x4) No brackets NA 12.1 (27) 415 42 (93) 55 (123) DC grounded GRP 1550x355x255 (51x12x10) Light Grey 16 (35.3) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08203 Rev. A

Updated: 2009-07-28

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

310

POWERWAVE

Dual Broadband Antennas

7750.90

Dual Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.2/13.1, 18/15.9 TILT: MET LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >27 >24 15 10 <0.33 <-153 300 600
2,4,6,8,10,12

824-960 824-896 14.6/12.5 50 <1.5:1 69 14.9 2 to 12


>18,17,16,16,15,15@ >18,17,16,16,15,15@ 2,4,6,8,10,12 >18,18,16,15,14@ 2,4,6,8

1710-2170 880-960 15.2/13.1 1710-1880 17.5/15.4 1850-1990 17.7/15.6 Dual linear 45 50 <1.5:1 67 13.7 65 6.9 65 6.6 0 to 8
>18,18,16,15,14@ 2,4,6,8 >18,18,16,15,14@ 2,4,6,8

1900-2170 18/15.9

Dual linear 45

62 6.2

30 40

30 <1.0 <-25 0.5 >27 >24 15 8 <0.48

30 <2.0 <-25 0.3 >27 >24 20 7 <0.62

30 <2.0 <-25 0.3 >27 >24 20 >7 <0.62 <-153 <-160 250 600

30 <2.0 <-25 0.3 >27 >24 20 >7 <0.62

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 1408x280x125mm (47x11x4) Pre mounted fixed tilt brackets 15.6 (34.4) 12.1 (27) 415 42 (93) 55 (123) DC grounded GRP 1550x355x255 (51x12x10) Light Grey 19.5 (43) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08201 Rev. A

Updated: 2009-07-28

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

311

POWERWAVE

Dual Broadband Antennas

7752.90

Dual Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.7/14.6, 17.6/15.5 TILT: MET LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >27 >25 16 > 12 <0.26 <-153 300 600
>17,16,15,14@ 2,4,6,8

824-960 824-896 15.8/13.7 50 1.5:1 71 9.6 2 to 9


>17,16,15,14@ 2,4,6,8 >17,16,15,14,13@ 2,4,6,8

1710-2170 880-960 16.7/14.6 1710-1880 17.1/15 1850-1990 17.3/15.2 Dual linear 45 50 1.5:1 67 8.9 63 7.1 63 6.6 0 to 8
>18,18,16,15,14@ 2,4,6,8 >20,19,19,18,17@ 2,4,6,8

1900-2170 17.6/15.5

Dual linear 45

61 6.3

30 40

30 <1.0 <-25 0.5 >27 >25 15 > 9.5 <0.39

30 <2.0 <-25 0.5 >27 >25 16 > 6.2 <0.5

30 <2.0 <-25 0.5 >30 >25 16 > 6.5 <0.59 <-153 <-160 250 500

30 <3.0 <-25 0.4 >30 >25 16 > 7.5 <0.59

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 2033x280x125mm (68x11x4) Pre-mounted fixed tilt bracket 16.0 (35) 19.8 (44) 653 42 (93) 55 (123) DC grounded GRP 2175x355x255 (72x14x10) Light Grey 27 (59.5) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08202 Rev. A

Updated: 2009-07-28

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

312

POWERWAVE

Dual Broadband Antennas

7752.00

Dual Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.7/14.6, 17.6/15.5 TILT: 2-9/0-8 LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >27 >25 16 > 12 <0.26 <-153 300 600
>17,16,15,14@ 2,4,6,8

824-960 824-896 15.8/13.7 50 1.5:1 71 9.6 2-9


>17,16,15,14@ 2,4,6,8 >17,16,15,14,13@ 2,4,6,8

1710-2170 870-960 16.7/14.6 1710-1880 17.1/15 1850-1990 17.3/15.2 Dual linear 45 50 1.5:1 67 8.9 63 7.1 63 6.6 0-8
>18,18,17,16,16@ 2,4,6,8 >20,19,19,18,17@ 2,4,6,8

1900-2170 17.6/15.5

Dual linear 45

61 6.3

30 40

30 <1.0 <-25 0.5 >27 >25 15 > 9.5 <0.39

30 <2.0 <-25 0.5 >27 >25 16 > 6.2 <0.5

30 <2.0 <-25 0.5 >30 >25 16 > 6.5 <0.59 <-153 <-160 250 500

30 <3 <-25 0.4 >30 >25 16 > 7.5 <0.59

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 2033x280x125mm (68x11x4) Pre-mounted heavy duty brackets 19.8 (44) 16.0 (35) 653 42 (93) 70 (156) DC grounded -40C to +60C GRP 2175x355x255 (72x14x10) Light Grey 27 (59.5) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010

Updated: 2010-11-03

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

313

POWERWAVE

Dual Broadband Antennas

7752.0S0.0000.00

Dual Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.7/14.6, 17.6/15.5 TILT: MET LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >27 >25 16 > 12 <0.26 <-153 300 600
>17,16,15,14@ 2,4,6,8

824-960 824-896 15.8/13.7 50 1.5:1 71 9.6 2 to 9


>17,16,15,14@ 2,4,6,8 >17,16,15,14,13@ 2,4,6,8

1710-2170 880-960 16.7/14.6 1710-1880 17.1/15 1850-1990 17.3/15.2 Dual linear 45 50 1.5:1 67 8.9 63 7.1 63 6.6 0 to 8
>18,18,16,15,14@ 2,4,6,8 >20,19,19,18,17@ 2,4,6,8

1900-2170 17.6/15.5

Dual linear 45

61 6.3

30 40

30 <1.0 <-25 0.5 >27 >25 15 > 9.5 <0.39

30 <2.0 <-25 0.5 >27 >25 16 > 6.2 <0.5

30 <2.0 <-25 0.5 >30 >25 16 > 6.5 <0.59 <-153 <-160 250 500

30 <3.0 <-25 0.4 >30 >25 16 > 7.5 <0.59

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 2033x280x125mm (68x11x4) No brackets NA 16.0 (35) 653 42 (93) 55 (123) DC grounded GRP 2175x355x255 (72x14x10) Light Grey 27 (59.5) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08202 Rev. A

Updated: 2009-07-28

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

314

POWERWAVE

Dual Broadband Antennas

7755.00

Dual Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.3/15.2, 17.8/15.7 TILT: 2-8/0-8 LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >30 >25 16 >11 <0.3 <-150 300 600
>18,18,17,16,16@ 2,4,6,8

824-960 824-896 16.6/14.5 50 1.5:1 71 7.4 2-8


>18,18,17,16,16@ 2,4,6,8 >17,16,15,14,13@ 2,4,6,8

1710-2170 870-960 17.3/15.2 1710-1880 17.3/15.2 1850-1990 17.6/15.5 Dual linear 45 50 1.5:1 67 7 65 6.9 65 6.4 0-8
>17,17,16,15,14@ 2,4,6,8 >17,17,16,15,14@ 2,4,6,8

1900-2170 17.8/15.7

Dual linear 45

62 6.1

30 38

30 <1.0 <-25 0.5 >30 >25 14 > 9.5 <0.41

30 <1.5 <-25 0.5 >30 >25 16 > 6.3 <0.53

30 <1 <-25 0.5 >30 >25 16 >7.2 <0.58 <-150 <-160 250 600

30 <3.5 <-25 0.5 >30 >25 16 >7.5 <0.58

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 2658x280x125mm (88x11x4) Pre-mounted heavy duty brackets 25.1 (55) 19.6 (43) 880 42 (93) 55 (123) DC grounded -40C to +60C GRP 2800x355x255 (92x12x10) Light Grey 32.5 (71.6) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010

Updated: 2009-07-28

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

315

POWERWAVE

Dual Broadband Antennas

7755.90

Dual Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.3/15.2, 17.8/15.7 TILT: MET LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 <-25 0.5 >30 >25 16 >11 <0.3 <-150 300 600
18,18,17,16,16@ 2,4,6,8

824-960 824-896 16.6/14.5 50 <1.5:1 71 7.4 2 to 8


18,18,17,16,16@ 2,4,6,8 >17,16,15,14,13@ 2,4,6,8

1710-2170 880-960 17.3/15.2 1710-1880 17.3/15.2 1850-1990 17.6/15.5 Dual linear 45 50 <1.5:1 67 7 65 6.9 65 6.4 0 to 8
>17,17,16,15,14@ 2,4,6,8 >17,17,16,15,14@ 2,4,6,8

1900-2170 17.8/15.7

Dual linear 45

62 6.1

30 40

30 <1.0 <-25 0.5 >30 >25 14 >9.5 <0.41

30 <1.5 <-25 0.5 >30 >25 16 > 6.3 <0.53

30 <1.0 <-25 0.5 >30 >25 16 >7.2 <0.58 <-150 <-160 250 600

30 <3.5 <-25 0.5 >30 >25 16 >7.5 <0.58

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 2658x280x125mm (88x11x4) Pre-mounted fixed tilt bracket 23.1 (51) 19.6 (43) 880 42 (93) 55 (123) DC grounded GRP 2800x355x255 (92x12x10) Light Grey 30.5 (67.1) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08203 Rev. A

Updated: 2009-07-28

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

316

POWERWAVE

Very Low Broadband Antennas

7755.0S0.0000.00

Dual Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.3/15.2, 17.8/15.7 TILT: MET LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Tracking, horizontal plane 60 (dB) Isolation between inputs (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >18,18,17,16,16@ <1.0 30 <-25 0.5 >30 >25 16 >11 <-150 300 600 71 7.4 2 to 8 >17,16,15,14,13@ <1.5 30 <-25 0.5 >30 >25 16 > 6.3 824-896 16.6/14.5 Dual linear 45 50 1.5:1 65 6.9 824-960 1710-1880 17.3/15.2

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, in (mm) Mounting Weight, with brackets, lbs (kg) Weight, without brackets, lbs (kg)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)

4 x 7/16 DIN Female Bottom 2658x280x125mm (88x11x4) No brackets NA 19.6 (43) 880 42 (93) 55 (123) DC grounded GRP 2800x355x255 (92x12x10) Light Grey 32.5 (71.6) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, mph (m/s) Survival wind speed, mph (m/s) Lightning protection Operating Temperature Radome material Packet size, HxWxD, in (mm) Radome colour Shipping weight, lbs (kg) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08203 Rev. A

Updated: 2009-07-28

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

317

Triple Broadband Antennas

POWERWAVE

Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz

Triple Broadband Antennas


Cross Polarized Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz

Horizontal Beamwidth 65 65 65 65

Gain dBi dBd 16.2/14.1, 16.5/14.4, 16.5/14.4 14.7/12.6, 14.6/12.5, 14.6/12.5 16.2/14.1, 16.5/14.4, 16.5/14.4 17.3/15.2, 17.9/15.8, 17.9/15.8

Tilt
2-9/0-10/0-10

Length 2.0m (66) 1.4m (47) 2.0m (66) 2.6m (86)

Part Number 5782.00 7780.00 7782.00 7785.00

Page 319 320 321 322

MET MET MET

318

POWERWAVE

Triple Broadband Antennas

5782.00

Triple Broadband Cross Polarized

POLARIZATION: XXX-pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: 2-9/0-10/0-10 LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1 25 0.5 > 28 > 26 16 > 11 < 0.27 < -153 300 600
>18,17,16,16@ 2,5,7,9 degree

824-960 824-896 15.8/13.7 50 < 1.5:1 71 9.6 2-9


> 18, 17, 16, 16@ 2,5,7,9 degree > 17, 15, 13@ 0, 6, 10 degree

2x1710-2170 870-960 16.2/14.1 1710-1880 16.0/13.9 1850-1990 16.1/14.0 Dual Linear +/- 45 50 < 1.5:1 67 8.6 65 10 65 9.4 0 - 10
> 17, 15, 14@ 0, 6, 10 degree > 17, 16, 15@ 0, 6, 10 degree

1900-2170 16.5/14.4

Dual Linear +/- 45

63 8.7

> 30 > 34

> 30 <1 25 0.5 > 30 > 26 15 >9 < 0.47

> 30 < 1.5 25 0.5 > 27 > 25 16 >7 < 0.52

> 30 > 34 <2 25 0.5 > 28 > 27 16 >6 < 0.66 < -153 < -160 250 500

> 30 <4 25 0.5 > 30 > 27 15 >6 < 0.66

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6 x 7/16 DIN Female Bottom 2033x280x125 (68x11x4) Pre-mounted standard brackets 23.4 (48) 17.9 (39) 653 42 (93) 55 (123) DC Ground -40C to +60C PVC 2175x355x255 (72x14x10) Light Grey 28 (61.7) 8210.40, 8210.10, 8230.40, 8230.10 7256.00, 7454.00, 2210.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010

Updated: 2009-08-02

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

319

POWERWAVE

Triple Broadband Antennas

7780.00

Triple Broadband Cross Polarized

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.7/12.6, 14.8/12.7, 14.8/12.7 TILT: 2-12/0-12/0-12 LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1 25 0.7 >27 >24 15 > 9.3 < 0.35 -153 300 600
>18,17,16,16@ 2,4,8,12

824-960 824-896 14.1/12 50 1.5:1 71 14.9 2 - 12


>17,16,15,14@ 2,4,8,12 >17,16,15,14@ 0,4,8,12

2x1710-2170 870-960 14.7/12.6 1710-1880 14.4/12.3 1850-1990 14.6/12.5 Dual linear 45 50 1.5:1 67 13.9 65 13.3 64 12.6 0 - 12
>17,16,15,14@ 0,4,8,12 >17,16,15,14@ 0,4,8,12

1900-2170 14.8/12.7

Dual linear 45

64 12.0

30 38

30 <2 25 0.7 >28 >24 14 >7.7 < 0.50

30 <1.5 25 0.7 >28 >24 16 >6 < 0.55

30 38 <1.2 25 1 >28 >24 18 >5.5 < 0.74 -160 250 500

>30 <4 25 1 >28 >24 18 > 5.5 < 0.74

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6 x 7/16 DIN Female Bottom 1408x280x125mm (47x11x4) Pre-mounted heavy duty brackets 19 (42) 13.5 (30) 415 42 (93) 55 (123) DC grounded -40C to +60C GRP 1550x355x200 (51x12x7) Light Grey 23 (50.7) 8210.40, 8210.10, 8230.40, 8230.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010

Updated: 2009-07-27

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

320

POWERWAVE

Triple Broadband Antennas

7782.00

Triple Broadband Cross Polarized

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: 2-9/0-10/0-10 LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 25 0.5 >28 >26 16 >11 <0.27 <-153 300 600
>18,17,16,16@ 2,5,7,9

824-960 824-896 15.8/13.7 50 1.5:1 71 9.6 2-9


>18,17,16,16@ 2,5,7,9 >17,15,13@ 0,6,10

2x1710-2170 870-960 16.2/14.1 1710-1880 16.0/13.9 1850-1990 16.1/14 Dual linear 45 50 1.5:1 67 8.6 65 10 65 9.4 0 - 10
>17,15,14@ 0,6,10 >17,16,15@ 0,6,10

1900-2170 16.5/14.4

Dual linear 45

63 8.7

>30 >34

>30 <1 25 0.5 >30 >26 15 >9.2 <0.47

>30 <1.5 25 0.5 >27 >25 16 >6.7 <0.52

>30 >34 <2 25 0.5 >28 >27 16 >6.3 <0.66 <-160 250 500

>30 <4 25 0.5 >30 >27 15 >6.3 <0.66

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6 x 7/16 DIN Female Bottom 2033x280x125mm (68x11x4) Pre-mounted standard brackets 23.4 (48) 17.9 (39) 653 42 (93) 67 (150) DC grounded -40C to +60C GRP 2175x355x255 (72x14x10) Light Grey 28 (61.7) 8210.40, 8210.10, 8230.40, 8230.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010

Updated: 2009-07-27

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

321

POWERWAVE

Triple Broadband Antennas

7785.00

Triple Broadband Cross Polarized

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.3/15.2, 17.9/15.8, 17.9/15.8 TILT: 2-8/0-8/0-8 LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1 25 0.5 >28 >27 16 >12 <0.24 -153 300 600
>17,16,15,14@ 2,4,6,8

824-960 824-896 16.7/14.6 50 1.5:1 71 7.4 2-8


>17,16,15,14@ 2,4,6,8 >17,16,15,14,13@ 0,2,4,6,8

2x1710-2170 870-960 17.3/15.2 1710-1880 17.3/15.2 1850-1990 17.5/15.4 Dual linear 45 50 1.5:1 67 6.9 66 6.7 65 6.4 0-8
>17,16,15,14,13@ 0,2,4,6,8 >17,16,16,15,15@ 0,2,4,6,8

1900-2170 17.9/15.8

Dual linear 45

62 6.2

30 38

30 <1 25 0.5 >28 >27 15 >9.5 <0.44

>30 <1.1 25 0.5 >30 >27 16 >7.0 <0.47

30 38 <1.0 25 0.5 >30 >27 15 >7.5 <0.52 -160 250 500

>30 <2.9 25 0.5 >30 >25 17 >7.7 <0.52

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6 x 7/16 DIN Female Bottom 2658x280x125mm (88x11x4) Pre-mounted heavy duty brackets 27.7 (61) 22.2 (49) 880 42 (93) 55 (123) DC grounded -40C to +60C GRP 2800x355x255 (92x12x10) Light Grey 33 (72.7) 8210.40, 8210.10, 8230.40, 8230.10 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010

Updated: 2009-07-23

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

322

Single and Dual Band Antennas

Power wave

The Powerwave single band antennas outstanding performance in the field derives from excellent voltage standing wave ratio (VSWR), isolation beam squint and tracking. This design ensures minimized intermodulation products, thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one antenna with two orthogonal polarizations slanted at 45 to provide the independently fading signals needed for achieving top- quality coverage. As a result of thorough, in-depth research and testing, Powerwave has produced a variety of designs that ensure the isolation, cross polarization discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain, hence the most efficient system performance.

Single and Dual Band Antennas

POWERWAVE

Single and Dual Band Antennas

Single Band Antennas Cross Polarized ALX Cross Polarized Antennas, 806-896 MHz X-Urban Cross Polarized Antennas, 824-896/870-960 MHz Vertical Polarized Omni Vertical Cross Polarized Antennas, 806-896 MHz Urban Vertical Polarized Antennas, 824-896/870-960 MHz Dual Band Antennas Cross Polarized ALXC Cross Polarized Antennas, 870-960/1710-1880 MHz DBB90 Cross Polarized Antennas, 824-896/1710-2170 MHz Vertical Polarized ALVC Vertical Polarized Antennas, , 806-896/1850-1990 MHz Page 379 390 Page 394 Page 325 327 Page 347 355

324

Single Band Antennas

POWERWAVE

ALX Cross Polarized Antennas, 806-896 MHz

Single Band Antennas


Cross Polarized ALX Cross Polarized Antennas, 806-896 MHz

Horizontal Beamwidth 90

Gain dBi dBd 10.5/8.4

Tilt FET

Length 0.7m (2'3")

Part Number 7390.00B

Page 326

325

POWERWAVE

Single Band Antennas

7390.00B

ALX Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 806-896 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 10.5/8.4 TILT: FET LENGTH: 0.7m (23)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <-150 250 500 806-896 806-896 10.5/8.4 Linear slanted 50 <1.4:1 90 29 0 >13 30 <1 <2 >19 >17 >13

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 710x280x125 (24x11x5) Pre-mounted standard bracket 7.7 4 189 42 55 DC grounded GRP 850x355x200 (29x12x10) 6.5 (141) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08018 Rev A

Updated: 2010-03-31

326

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Single Band Antennas

POWERWAVE

X-Urban Cross Polarized Antennas, 824-896/870-960 MHz

Single Band Antennas


Cross Polarized X-Urban Cross Polarized Antennas, 824-896/870-960 MHz

Horizontal Beamwidth 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65

Gain dBi dBd 12.5/10.4 12.5/10.4 14.5/12.4 15.5/13.4 15/12.9 15/12.9 15/12.9 16.5/14.4 16.5/14.4 16.5/14.4 17.5/15.4 17.5/15.4 17.5/15.4 17.5/15.4 17/14.9 18/15.9 18/15.9 18/15.9 18/15.9

Tilt FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET

Length 0.7m (2'3") 0.7m (2'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.9m (6'2") 1.9m (6'2") 1.9m (6'2") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 1.9m (6'2") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6")

Part Number 7216.03 7282.03 7217.11 7217.04 7217.03 7263.01 7263.04 7255.03 7281.02 7281.04 7218.03 7218.04 7218.13 7218.14 7255.04 7218.05 7218.09 7218.15 7218.19

Page 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346

327

POWERWAVE

Single Band Antennas

7216.03

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 12.5/10.4 TILT: FET LENGTH: 0.7m (23)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <-150 250 500 880-960 880-960 12.5/10.4 Linear slanted 45 50 <1.3:1 65 26 0 >10 >30 <1 <0.3 >24 >20 >20

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 660x256x50 (22x10x2) Pre-mounted standard bracket 7.3 (16) 3.6 (7.9) 222 42 55 (123) DC grounded PVC 770x308x121 (26x1x5) 7.5 (16.5) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08069 Rev A

Updated: 2010-03-31

328

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7282.03

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 12.5/10.4 TILT: FET LENGTH: 0.7m (23)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 824-896 824-896 12.5/10.4 Linear slanted 45 50 <1.3:1 65 25 4 >9 >30 <1 <0.3 >22 >18 >20 >10 <-150 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 660x256x50 (22x10x2) Pre-mounted standard bracket 7.7 (16.9) 4 (8.8) 222 42 55 (123) DC grounded PVC Light Gray 750x308x121 (26x1x5) 5 (11) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08142 Rev A

Updated: 2010-03-31

329

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7217.11

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.5/12.4 TILT: FET LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 14.5/12.4 Linear slanted 45 50 <1.3:1 65 13 9 >14 >30 <1 <0.3 >23 >19 >20 >10 <-150 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 1320x256x50 (44x10x2) Pre-mounted standard bracket 8.5 (18.7) 4.8 (10.5) 493 42 55 (123) DC grounded PVC Light Gray 1430x308x121 (48x1x5) 10 (22) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08072 Rev A

Updated: 2010-03-31

330

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7217.04

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4 TILT: FET LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 15.5/13.4 Linear slanted 45 50 <1.3:1 65 13 0 >14 >30 <1 <0.3 >24 >20 >20 >10 <-150 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 1320x256x50 (44x10x2) Pre-mounted standard bracket 8.5 (18.7) 4.8 (10.5) 493 42 55 (123) DC grounded PVC Light Gray 1430x308x121 (48x1x5) 10 (22) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08071 Rev A

Updated: 2010-03-31

331

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7217.03

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15/12.9 TILT: FET LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 15/12.9 Linear slanted 45 50 <1.3:1 65 13 7 >14 >30 <1 <0.3 >24 >20 >20 >10 <-150 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 1320x256x50 (44x10x2) Pre-mounted standard bracket 8.5 (18.7) 4.8 (10.5) 493 42 55 (123) DC grounded PVC Light Gray 1430x308x121 (48x1x5) 10 (22) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08070 Rev A

Updated: 2010-03-31

332

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7263.01

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15/12.9 TILT: FET LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 824-896 824-896 15/12.9 Linear slanted 45 50 <1.4:1 65 13 0 >14 >30 <1 <0.3 >22 >20 >20 >10 <-150 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 1320x256x50 (52x10.4x2) Pre-mounted standard bracket 7.5 (16.5) 7.5 (16.5) 493 42 55 (123) DC grounded PVC Light Gray 1430x308x121 (56x12x5) 8.5 (19) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08126 Rev A

Updated: 2010-03-31

333

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7263.04

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15/12.9 TILT: FET LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 824-896 824-896 15/12.9 Linear slanted 45 50 <1.4:1 65 13 6 >14 >30 <1 <0.3 >22 >20 >20 >10 <-150 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 1320x256x50 (52x10.4x2) Pre-mounted standard bracket 7.5 (16.5) 7.5 (16.5) 493 42 55 (123) DC grounded PVC Light Gray 1430x308x121 (56x12x5) 8.5 (19) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08127 Rev A

Updated: 2010-03-31

334

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7255.03

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.5/14.4 TILT: FET LENGTH: 1.9m (62)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 16.5/14.4 Linear slanted 45 50 <1.4:1 65 9 6 >15 >30 <1 <0.3 >24 >20 >20 >10 <-150 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 1940x256x50 (64x10x2) Pre-mounted standard bracket 14.2 (31.3) 10.5 (23.1) 794 42 55 (123) DC grounded PVC Light Gray 2050x308x121 (69x1x5) 12 (26.5) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08081 Rev A

Updated: 2010-03-31

335

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7281.02

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.5/14.4 TILT: FET LENGTH: 1.9m (62)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 824-896 824-896 16.5/14.4 Linear slanted 45 50 <1.3:1 65 9 0 >15 >30 <1 <0.3 >24 >20 >20 >10 <-150 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 1940x256x50 (64x10x2) Pre-mounted heavy duty bracket 14.5 (31.9) 9 (19.8) 794 42 55 (123) DC grounded PVC Light Gray 2050x308x121 (69x1x5) 10 (22) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08132 Rev A

Updated: 2010-03-31

336

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7281.04

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.5/14.4 TILT: FET LENGTH: 1.9m (62)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 824-896 824-896 16.5/14.4 Linear slanted 45 50 <1.3:1 65 9 6 >14 >30 <1 <0.3 >24 >20 >20 >10 <-150 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 1940x256x50 (64x10x2) Pre-mounted heavy duty bracket 14.5 (31.9) 9 (19.8) 794 42 55 (123) DC grounded PVC Light Gray 2050x308x121 (69x1x5) 10 (22) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08223Rev A

Updated: 2010-03-31

337

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7218.03

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.5/15.4 TILT: FET LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 870-960 870-960 17.5/15.4 Linear slanted 45 50 <1.3:1 65 6.5 6 >17 >30 <1 <0.5 >24 >20 >20 >10 <-150 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 20.2 (44.5) 14 (30.8) 1082 42 55 (123) DC grounded PVC Light Gray 2690x308x121 (810x1x5) 18 (39.7) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08073 Rev A

Updated: 2010-03-31

338

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7218.04

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.5/15.4 TILT: FET LENGTH: 2.6m (8'6")

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 870-960 870-960 17.5/15.4 Linear slanted 45 50 <1.3:1 65 6.5 4 >17 >30 <1 <0.5 >24 >20 >20 >10 <-150 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 2580x256x50 (8'6"x10"x2") Pre-mounted standard bracket 20.2 (44.5) 14 (30.8) 1082 42 55 (123) DC grounded PVC Light Gray 2690x308x121 (8'10"x1'x5') 18 (39.7) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08074 Rev A

Updated: 2009-07-28

339

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7218.13

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.5/15.4 TILT: FET LENGTH: 2.6m (8'6")

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 870-960 870-960 17.5/15.4 Linear slanted 45 50 <1.3:1 65 6.5 6 >18 >30 <1 <0.5 >24 >20 >20 >10 <-150 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 2580x256x50 (8'6"x10"x2") Pre-mounted heavy duty bracket 22.3 (49.1) 16.8 (37) 1082 42 55 (123) DC grounded PVC Light Gray 2690x308x121 (8'10"x1'x5') 18 (39.7) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08077 Rev A

Updated: 2009-07-28

340

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7218.14

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.5/15.4 TILT: FET LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 870-960 870-960 17.5/15.4 Linear slanted 45 50 <1.3:1 65 6.5 4 >18 >30 <1 <0.5 >24 >20 >20 >10 <-150 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted heavy duty bracket 22.3 (49.1) 16.8 (37) 1082 42 55 (123) DC grounded PVC Light Gray 2690x308x121 (810x1x5) 18 (39.7) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08078 Rev A

Updated: 2010-03-31

341

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7255.04

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 880-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17/14.9 TILT: FET LENGTH: 1.9m (62)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 880-960 880-960 17/14.9 Linear slanted 45 50 <1.4:1 65 9 0 >17 >30 <1 <0.3 >24 >20 >20 >10 <-150 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 1940x256x50 (64x10x2) Pre-mounted standard bracket 14.2 (31.3) 10.5 (23.1) 794 42 55 (123) DC grounded PVC Light Gray 2050x308x121 (69x1x5) 12 (26.5) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08082 Rev A

Updated: 2010-03-31

342

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7218.05

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 2.6m (8'6")

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 870-960 870-960 18/15.9 Linear slanted 45 50 <1.3:1 65 6.5 0 >18 >30 <1 <0.3 >24 >20 >20 >10 <-150 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 2580x256x50 (8'6"x10"x2") Pre-mounted standard bracket 20.2 (44.5) 14 (30.8) 1082 42 55 (123) DC grounded PVC Light Gray 2690x308x121 (8'10"x1'x5') 18 (39.7) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

PN7218.05

Updated: 2009-07-28

343

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7218.09

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 870-960 870-960 18/15.9 Linear slanted 45 50 <1.3:1 65 6.5 2 >18 >30 <1 <0.3 >24 >20 >20 >10 <-150 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 20.2 (44.5) 14 (30.8) 1082 42 55 (123) DC grounded PVC Light Gray 2690x308x121 (810x1x5) 18 (39.7) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08076 Rev A

Updated: 2010-03-31

344

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7218.15

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 870-960 870-960 18/15.9 Linear slanted 45 50 <1.3:1 65 6.5 0 >18 >30 <1 <0.3 >24 >20 >20 >10 <-150 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted heavy duty bracket 22.3 (49.1) 16.8 (37) 1082 42 55 (123) DC grounded PVC Light Gray 2690x308x121 (810x1x5) 18 (39.7) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08079 Rev A

Updated: 2010-03-31

345

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7218.19

X-Urban Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 2.6m (8'6")

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 870-960 870-960 18/15.9 Linear slanted 45 50 <1.3:1 65 6.5 2 >18 >30 <1 <0.4 >24 >20 >20 >10 <-150 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN female Bottom 2580x256x50 (8'6"x10"x2") Pre-mounted heavy duty bracket 22.3 (49.1) 16.8 (37) 1082 42 55 (123) DC grounded PVC Light Gray 2690x308x121 (8'10"x1'x5') 18 (39.7) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08080 Rev A

Updated: 2009-07-28

346

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Single Band Antennas

POWERWAVE

Omni Vertical Polarized Antennas, 806-896 MHz

Single Band Antennas


Vertical Polarized Omni Vertical Polarized Antennas, 806-896 MHz

Horizontal Beamwidth 360 360 360 360 360 360 360

Gain dBi dBd 11/8.9 11/8.9 11/8.9 11/8.9 11/8.9 11/8.9 11/8.9

Tilt FET FET FET FET FET FET FET

Length 3.14m (10'4") 3.14m (10'4") 3m (910") 3m (910") 3m (910") 3m (910") 3m (910")

Part Number 4168.21.33.00 4168.21.33.03 4168.11.33.00 4168.11.33.02 4168.11.33.03 4168.11.33.06 4168.11.33.52

Page 348 349 350 351 352 353 354

347

POWERWAVE

Single Band Antennas

4168.21.33.00

Omni Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi/dBd): 11/8.9 TILT: FET LENGTH: 3.14m (104)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 824-896 824-896 11/8.9 Linear vertical 50 <1.4:1 360 6.5 0 12 0.5 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 3140x78 (104x3) Pre-mounted bracket 12.5 (27.5) 11 (24.2) 204 42 55 DC grounded PVC Light Gray 3300x150x170 (1010x6x7) 16 (35.2) included

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08113 Rev A

Updated: 2010-04-05

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

348

POWERWAVE

Single Band Antennas

4168.21.33.03

Omni Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi/dBd): 11/8.9 TILT: FET LENGTH: 3.14m (104)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 824-896 824-896 11/8.9 Linear vertical 50 <1.4:1 360 6.5 3 12 0.5 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 3140x78 (104x3) Pre-mounted bracket 12.5 (27.5) 11 (24.2) 204 42 55 DC grounded PVC Light Gray 3300x150x170 (1010x6x7) 16 (35.2) included

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08114 Rev A

Updated: 2010-04-05

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

349

POWERWAVE

Single Band Antennas

4168.11.33.00

Omni Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi/dBd): 11/8.9 TILT: FET LENGTH: 3m (910)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 11/8.9 Linear vertical 50 <1.4:1 360 6.5 0 12 0.5 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 3000x78 (910x3) Pre-mounted bracket 12.5 (27.5) 11 (24.2) 194 42 55 DC grounded PVC Light Gray 3300x150x170 (1010x6x7) 16 (35.2) included

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08105 Rev A

Updated: 2010-04-05

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

350

POWERWAVE

Single Band Antennas

4168.11.33.02

Omni Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi/dBd): 11/8.9 TILT: FET LENGTH: 3m (910)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 11/8.9 Linear vertical 50 <1.4:1 360 6.5 2 12 0.5 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 3000x78 (910x3) Pre-mounted bracket 12.5 (27.5) 11 (24.2) 194 42 55 DC grounded PVC Light Gray 3300x150x170 (1010x6x7) 16 (35.2) included

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08109 RevA

Updated: 2010-04-05

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

351

POWERWAVE

Single Band Antennas

4168.11.33.03

Omni Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi/dBd): 11/8.9 TILT: FET LENGTH: 3m (910)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 11/8.9 Linear vertical 50 <1.4:1 360 6.5 3 12 0.5 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 3000x78 (910x3) Pre-mounted bracket 12.5 (27.5) 11 (24.2) 194 42 55 DC grounded PVC Light Gray 3300x150x170 (1010x6x7) 16 (35.2) included

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08106 Rev A

Updated: 2010-04-05

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

352

POWERWAVE

Single Band Antennas

4168.11.33.06

Omni Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi/dBd): 11/8.9 TILT: FET LENGTH: 3m (910)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 11/8.9 Linear vertical 50 <1.4:1 360 6.5 6 12 0.5 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 3000x78 (910x3) Pre-mounted bracket 12.5 (27.5) 11 (24.2) 194 42 55 DC grounded PVC Light Gray 3300x150x170 (1010x6x7) 16 (35.2) included

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08107 Rev A

Updated: 2010-04-05

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

353

POWERWAVE

Single Band Antennas

4168.11.33.52

Omni Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi/dBd): 11/8.9 TILT: FET LENGTH: 3m (910)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 11/8.9 Linear vertical 50 <1.4:1 360 6.5 2 uptilt 12 0.5 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 3000x78 (910x3) Pre-mounted bracket 12.5 (27.5) 11 (24.2) 194 42 55 DC grounded PVC Light Gray 3300x150x170 (1010x6x7) 16 (35.2) included

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08111 Rev A

Updated: 2010-04-05

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

354

Single Band Antennas

POWERWAVE

Urban Vertical Polarized Antennas, 824-896/870-960 MHz

Single Band Antennas


Vertical Polarized Urban Vertical Polarized Antennas, 824-896/870-960 MHz

Horizontal Beamwidth 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 90 90 90 90 90 90 90 90

Gain dBi dBd 12.5/10.4 13/10.9 15.5/13.4 15.5/13.4 15.5/13.4 15/12.9 17.5/15.4 17/14.9 17/14.9 17/14.9 18/15.9 18/15.9 18/15.9 18/15.9 18/15.9 12/9.9 14/11.9 14/11.9 15/12.9 15/12.9 16.5/14.4 16.5/14.4 16.5/14.4

Tilt FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET FET

Length 0.7m (2'3") 0.7m (2'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 1.3m (4'3") 2.6m (8'6") 1.9m (6'2") 1.9m (6'2") 2m (6'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6") 0.7m (2'3") 1.3m (4'3") 1.3m (4'3") 1.9m (6'2") 1.9m (6'2") 2.6m (8'6") 2.6m (8'6") 2.6m (8'6")

Part Number 7270.02 7225.04 7226.03 7226.04 7271.02 7271.03 7273.03 7227.14 7227.04 7272.02 7228.03 7228.04 7228.06 7228.08 7273.02 7230.04 7231.04 7231.06 7232.04 7232.07 7233.04 7233.06 7233.08

Page 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378

355

POWERWAVE

Single Band Antennas

7270.02

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 12.5/10.4 TILT: FET LENGTH: 0.7m (23)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 824-896 824-896 12.5/10.4 Linear vertical 50 <1.3:1 65 28 0 >10 >-20 0.5 >24 <-150 300

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 660x256x50 (22x10x2) Pre-mounted standard bracket 7.7 (16.9) 4 (8.8) 222 42 55 DC grounded PVC Light Gray 770x308x121 (26x1x5) 8.3 (18.2) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08048 Rev A

Updated: 2010-04-05

356

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7225.04

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 13/10.9 TILT: FET LENGTH: 0.7m (23)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 13/10.9 Linear vertical 50 <1.3:1 65 26 0 >9 >-20 0.5 >25 <-150 300

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 660x256x50 (22x10x2) Pre-mounted standard bracket 8.7 (19.1) 5 (11) 222 42 55 DC grounded -40C to +60C PVC Light Gray 770x308x121 (26x1x5) 6 (13.2) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08054 Rev A

Updated: 2010-04-27

357

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7226.03

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4 TILT: FET LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 15.5/13.4 Linear vertical 50 <1.3:1 65 14 6 >17 >-20 0.5 >25 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 1320x256x50 (44x10x2) Pre-mounted standard bracket 10.7 (23.5) 7 (15.4) 493 42 55 DC grounded PVC Light Gray 1430x308x121 (48x1x5) 8.5 (18) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08055 Rev A

Updated: 2010-04-28

358

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7226.04

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4 TILT: FET LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 15.5/13.4 Linear vertical 50 <1.3:1 65 14 0 >17 >-20 0.5 >23 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 1320x256x50 (44x10x2) Pre-mounted standard bracket 10.7 (23.5) 7 (15.4) 493 42 55 DC grounded PVC Light Gray 1430x308x121 (48x1x5) 8.5 (18) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08056 Rev A

Updated: 2010-04-05

359

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7271.02

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4 TILT: FET LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 824-896 824-896 15.5/13.4 Linear vertical 50 <1.3:1 65 14 0 >17 >-20 0.5 >24 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 1320x256x50 (44x10x2 ) Pre-mounted standard bracket 10.7 (23.5) 7 (15.4) 493 42 55 DC grounded PVC Light Gray 1430x308x121 (48x1x5) 8.5 (18.7) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08049 Rev A

Updated: 2010-04-05

360

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7271.03

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15/12.9 TILT: FET LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 824-896 824-896 15/12.9 Linear vertical 50 <1.4:1 65 14 5 >15 >-20 0.5 >24 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 1320x256x50 (44x10x2 ) Pre-mounted standard bracket 10.7 (23.5) 7 (15.4) 493 42 55 DC grounded PVC Light Gray 1430x308x121 (48x1x5) 8.5 (18.7) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08050 Rev A

Updated: 2010-04-05

361

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7273.03

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 824-896 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.5/15.4 TILT: FET LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 824-896 824-896 17.5/15.4 Linear vertical 50 <1.3:1 65 7 4 >17 >-20 0.5 >22 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 17.7 (39) 14 (30.8) 1082 42 55 DC grounded PVC Light Gray 2650x308x121 (88x1x5) 18.8 (41.4) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08128 Rev A

Updated: 2010-04-05

362

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7227.14

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17/14.9 TILT: FET LENGTH: 1.9m (62)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 17/14.9 Linear vertical 50 <1.3:1 65 9 0 >17 >-13 0.5 >23 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIM female Bottom 1940x256x50 (64x10x2) Pre-mounted standard bracket 14.1 (31) 10.4 (22.9) 1199 42 55 DC grounded PVC Light Gray 2050x308x121 (69x1x5) 13 (29) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-04-05

363

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7227.04

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17/14.9 TILT: FET LENGTH: 1.9m (62)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 17/14.9 Linear vertical 50 <1.3:1 65 9 0 >17 >-13 0.5 >23 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 1940x256x50 (64x10x2) Pre-mounted standard bracket 14.1 (31) 10.4 (22.9) 794 42 55 DC grounded PVC Light Gray 2050x308x121 (69x1x5) 13 (29) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08057 Rev A

Updated: 2010-04-05

364

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7272.02

Urban Vertical Polarized

POLARIZATION: V-Pol HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17/14.9 TILT: FET LENGTH: 2m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx@43dBm (dBc) Power handling, average total (W) >-20 0.5 <-150 500 17/14.9 Linear vertical 50 <1.4:1 65 9.5 0

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 1940x256x50 (64x10x2) Pre-mounted standard bracket 14.7 (32.4) 11 (24.2) 794 42 55 DC grounded PVC Light Gray 2050x308x121 (48x1x5) 14.8 (32.6) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08051 Rev A

Updated: 2010-04-05

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

365

POWERWAVE

Single Band Antennas

7228.03

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.0/15.9 TILT: 0 LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 18.0/15.9 Linear vertical 50 <1.3:1 65 6.5 0 >19 >-20 0.5 >23 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x N-female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 16.5 (36.3) 10.3 (22.7) 1082/139/1091 42 55 DC grounded PVC Light Gray 2690x308x121 (810x1x5) 17.0 (37.9) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-08-09

366

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7228.04

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.0/15.9 TILT: 0 LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 18.0/15.9 Linear vertical 50 <1.3:1 65 6.5 0 >19 >-20 0.5 >23 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 16.5 (36.3) 10.3 (22.7) 1082/139/1091 42 55 DC grounded PVC Light Gray 2690x308x121 (810x1x5) 17.0 (37.9) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-08-09

367

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7228.06

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 18/15.9 Linear vertical 50 <1.3:1 65 6.5 6 >17 >-20 0.5 >25 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 16.5 (36.3) 10.3 (22.7) 1082/139/1091 42 55 DC grounded PVC Light Gray 2690x308x121 (810x1x5) 17 (379) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08059 Rev A

Updated: 2010-04-05

368

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7228.08

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 18/15.9 Linear vertical 50 <1.3:1 65 6.5 2 >17 >-20 0.5 >25 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 16.5 (36.3) 10.3 (22.7) 1082/139/1091 42 55 DC grounded PVC Light Gray 2690x308x121 (810x1x5) 17 (379) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08060 Rev A

Updated: 2010-04-05

369

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7273.02

Urban Vertical Polarized

POLARIZATION: V-Pol HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18/15.9 TILT: FET LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () IM3, 2xTx@43dBm (dBc) Power handling, average total (W) >-20 0.5 <-150 500 18/15.9 Linear vertical 50 <1.3:1 65 7 0

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 2580x256x50 (86x10x2) Pre-mounted standard bracket 17.7 (39) 14 (30.8) 1082 42 55 DC grounded PVC Light Gray 2650x308x121 (88x1x5) 18.8 (41.4) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08052 Rev A

Updated: 2010-04-05

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

370

POWERWAVE

Single Band Antennas

7230.04

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 12/9.9 TILT: FET LENGTH: 0.7m (23)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 12/9.9 Linear vertical 50 <1.3:1 90 27 0 >12 >-20 0.5 >20 <-150 300

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 695x160x55 (23x6x2) Pre-mounted standard bracket 7 (15.4) 3.3 (7.2) 154 42 55 DC grounded PVC Light Gray 805x216x156 (28x9x6) 7.5 (16.5) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08061 Rev A

Updated: 2010-04-05

371

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7231.04

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 14/11.9 TILT: FET LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 14/11.9 Linear vertical 50 <1.3:1 90 14 0 >15 >-20 0.5 >20 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 1320x160x55 (44x6x2) Pre-mounted standard bracket 9.7 (21.3) 6 (13.2) 281 42 55 DC grounded PVC Light Gray 1430x216x156 (48x9x6) 11 (24.2) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08062 Rev A

Updated: 2010-04-05

372

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7231.06

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 14/11.9 TILT: FET LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 14/11.9 Linear vertical 50 <1.3:1 90 14 6 >17 >-20 0.5 >20 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 1320x160x55 (44x6x2) Pre-mounted standard bracket 9.7 (21.3) 6 (13.2) 281 42 55 DC grounded PVC Light Gray 1430x216x156 (48x9x6) 11 (24.2) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08063 Rev A

Updated: 2010-04-05

373

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7232.04

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15/12.9 TILT: FET LENGTH: 1.9m (62)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 15/12.9 Linear vertical 50 <1.3:1 90 9 0 >15 >-20 0.5 >20 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 1940x160x55 (64x6x2) Pre-mounted standard bracket 13.7 (30.2) 10 (22) 502 42 55 DC grounded PVC Light Gray 2050x216x156 (69x9x6) 15 (33) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08064 Rev A

Updated: 2010-04-05

374

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7232.07

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15/12.9 TILT: FET LENGTH: 1.9m (62)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 15/12.9 Linear vertical 50 <1.3:1 90 9 4 >15 >-15 0.5 >20 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 1940x160x55 (64x6x2) Pre-mounted standard bracket 13.7 (30.2) 10 (22) 502 42 55 DC grounded PVC Light Gray 2050x216x156 (69x9x6) 15 (33) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08065 Rev A

Updated: 2010-04-05

375

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7233.04

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.5/14.4 TILT: FET LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 16.5/14.4 Linear vertical 50 <1.3:1 90 6.5 0 >17 >-20 0.5 >20 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 2580x160x55 (86x6x2) Pre-mounted standard bracket 13.8 (30.4) 8.3 (18.2) 680 42 55 DC grounded PVC Light Gray 2690x216x156 (810x9x6) 15 (33) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08066 Rev A

Updated: 2010-04-05

376

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7233.06

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.5/14.4 TILT: FET LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 16.5/14.4 Linear vertical 50 <1.3:1 90 6.5 6 >17 >-20 0.5 >20 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 2580x160x55 (86x6x2) Pre-mounted standard bracket 13.8 (30.4) 8.3 (18.2) 680 42 55 DC grounded PVC Light Gray 2690x216x156 (810x9x6) 15 (33) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08067 Rev A

Updated: 2010-04-05

377

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Single Band Antennas

7233.08

Urban Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 870-960 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.5/14.4 TILT: FET LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 870-960 870-960 16.5/14.4 Linear vertical 50 <1.3:1 90 6.5 2 >17 >-20 0.5 >20 <-150 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN female Bottom 2580x160x55 (86x6x2) Pre-mounted standard bracket 13.8 (30.4) 8.3 (18.2) 680 42 55 DC grounded PVC Light Gray 2690x216x156 (810x9x6) 15 (33) 7456.00A, 2201.11, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-8068 Rev A

Updated: 2010-04-05

378

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Dual Band Antennas

POWERWAVE

ALXC Cross Polarized Antennas, 870-960/1710-1880 MHz

Dual Band Antennas


Cross Polarized ALXC Cross Polarized Antennas, 870-960/1710-1880 MHz

Horizontal Beamwidth 65 65 65 65 65 65 65 65 65 65

Gain dBi dBd 15.5/13.4, 15.0/12.9 15.5/13.4, 15.0/12.9 15.5/13.4, 17.5/15.4 15.5/13.4, 17.5/15.4 15.5/13.4, 17.5/15.4 15.5/13.4, 17.5/15.4 16.5/14.4, 16.0/13.9 16.5/14.4, 16.0/13.9 16.5/14.4, 16.0/13.9 16.5/14.4, 16.0/13.9

Tilt FET FET FET FET FET FET FET FET FET FET

Length 1.5m (4'11") 1.5m (4'11") 1.5m (4'11") 1.5m (4'11") 1.5m (4'11") 1.5m (4'11") 2.0m (6'6") 2.0m (6'6") 2.0m (6'6") 2.0m (6'6")

Part Number 7329.00B 7329.06B 7330.00B 7330.02B 7330.04B 7330.06B 7331.00B 7331.02B 7331.04B 7331.06B

Page 380 381 382 383 384 385 386 387 388 389

379

POWERWAVE

Dual Band Antennas

7329.00B

ALXC Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4, 15.0/12.9 TILT: FET LENGTH: 1.5m (411)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 65 13 0 >13 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >12 >-150 300 600 870-960 870-960 15.5/13.4 Dual linear slanted 50 <1.5:1 65 13 0 >15 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >12 >-150 300 600 1710-1880 1710-1880 15/12.9

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1450x280x125 (49x11x5) Pre-mounted heavy duty brackets 12.6 (27.7) 7.1 (15.6) 430 42 (93) 55 (123) DC grounded GRP Light gray 1620x355x255 (54x12x10) 15.3 (13.7) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08143 Rev A

Updated: 2009-07-28

380

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7329.06B

ALXC Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4, 15.0/12.9 TILT: FET LENGTH: 1.5m (411)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 65 13 6 >8 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >11 >-150 300 600 870-960 870-960 15.5/13.4 Dual linear slanted 50 <1.5:1 65 13 6 >13 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >9 >-150 300 600 1710-1880 1710-1880 14.5/12.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1450x280x125 (49x11x5) Pre-mounted heavy duty brackets 12.6 (27.7) 7.1 (15.6) 430 42 (93) 55 (123) DC grounded GRP Light gray 1620x355x255 (54x12x10) 15.3 (13.7) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-

Updated: 2009-07-28

381

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7330.00B

ALXC Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4, 17.5/15.4 TILT: FET LENGTH: 1.5m (411)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 67 13.4 0 >16 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >12 >-150 300 600 870-960 870-960 15.5/13.4 Dual linear slanted 50 <1.5:1 66 7 0 >16 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >13 >-150 300 600 1710-1880 1710-1880 17.5/15.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1450x280x125 (49x11x5) Pre-mounted heavy duty brackets 12.6 (27.7) 7.1 (15.6) 430 42 (93) 55 (123) DC grounded GRP Light gray 1620x355x255 (54x12x10) 15.3 (13.7) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08144 Rev A

Updated: 2009-07-28

382

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7330.02B

ALXC Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4, 17.5/15.4 TILT: FET LENGTH: 1.5m (411)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 67 13.4 2 >16 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >12 >-150 300 600 870-960 870-960 15.5/13.4 Dual linear slanted 50 <1.5:1 66 7 2 >16 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >13 >-150 300 600 1710-1880 1710-1880 17.5/15.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1450x280x125 (49x11x5) Pre-mounted heavy duty brackets 12.6 (27.7) 7.1 (15.6) 430 42 (93) 55 (123) DC grounded GRP Light gray 1620x355x255 (54x12x10) 15.3 (13.7) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08145 Rev A

Updated: 2009-07-28

383

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7330.04B

ALXC Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4, 17.5/15.4 TILT: FET LENGTH: 1.5m (411)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 67 13.4 4 >16 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >12 >-150 300 600 870-960 870-960 15.5/13.4 Dual linear slanted 50 <1.5:1 66 7 4 >16 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >13 >-150 300 600 1710-1880 1710-1880 17.5/15.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1450x280x125 (49x11x5) Pre-mounted heavy duty brackets 12.6 (27.7) 7.1 (15.6) 430 42 (93) 55 (123) DC grounded GRP Light gray 1620x355x255 (54x12x10) 15.3 (13.7) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08146 Rev A

Updated: 2009-07-28

384

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7330.06B

ALXC Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4, 17.5/15.4 TILT: FET LENGTH: 1.5m (411)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 67 13 6 >16 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >11 >-150 300 600 870-960 870-960 15.6/13.5 Dual linear slanted 50 <1.5:1 66 7 6 >16 >30 >30 <2.0 >-20 <0.5 >26 >26 >13 >11 >-150 300 600 1710-1880 1710-1880 17.3/15.2

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1450x280x125 (49x11x5) Pre-mounted heavy duty brackets 12.6 (27.7) 7.1 (15.6) 430 42 (93) 55 (123) DC grounded GRP Light gray 1620x355x255 (54x12x10) 15.3 (13.7) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08147 Rev A

Updated: 2009-07-28

385

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7331.00B

ALXC Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.5/14.4, 16.0/13.9 TILT: FET LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 67 9 0 >16 >30 >30 <2.0 >-22 <0.5 >25 >25 >13 >11 >-150 300 600 870-960 870-960 16.6/14.5 Dual linear slanted 50 <1.5:1 64 9 0 >16 >30 >30 <2.0 >-22 <0.5 >25 >25 >13 >11 >-150 300 600 1710-1880 1710-1880 16.1/14

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1990x280x125 (66x11x5) Pre-mounted heavy duty brackets 15.3 (33.7) 9.8 (21.6) 636 42 (93) 55 (123) DC grounded GRP Light gray 2160x355x255 (71x12x10) 18.3 (40.3) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08148 Rev A

Updated: 2009-07-28

386

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7331.02B

ALXC Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.5/14.4, 16.0/13.9 TILT: FET LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 67 9 2 >16 >30 >30 <2.0 >-22 <0.5 >25 >25 >13 >11 >-150 300 600 870-960 870-960 16.6/14.5 Dual linear slanted 50 <1.5:1 64 9 2 >16 >30 >30 <2.0 >-22 <0.5 >25 >25 >13 >11 >-150 300 600 1710-1880 1710-1880 15.6/13.5

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1990x280x125 (66x11x5) Pre-mounted heavy duty brackets 15.3 (33.7) 9.8 (21.6) 636 42 (93) 55 (123) DC grounded GRP Light gray 2160x355x255 (71x12x10) 18.3 (40.3) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08149 Rev A

Updated: 2009-07-28

387

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7331.04B

ALXC Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.5/14.4, 16.0/13.9 TILT: FET LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 67 9 4 >16 >30 >30 <2.0 >-22 <0.5 >25 >25 >13 >11 >-150 300 600 870-960 870-960 16.6/14.5 Dual linear slanted 50 <1.5:1 64 9 4 >16 >30 >30 <2.0 >-22 <0.5 >25 >25 >13 >11 >-150 300 600 1710-1880 1710-1880 15.4/13.3

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1990x280x125 (66x11x5) Pre-mounted heavy duty brackets 15.3 (33.7) 9.8 (21.6) 636 42 (93) 55 (123) DC grounded GRP Light gray 2160x355x255 (71x12x10) 18.3 (40.3) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08150 Rev A

Updated: 2009-07-28

388

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7331.06B

ALXC Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 870-960, 1710-1880 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.5/14.4, 16.0/13.9 TILT: FET LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.5:1 67 9 6 >16 >30 >30 <2.0 >-22 <0.5 >25 >25 >13 >11 >-150 300 600 870-960 870-960 16.6/14.5 Dual linear slanted 50 <1.5:1 64 9 6 >16 >30 >30 <2.0 >-22 <0.5 >25 >25 >13 >11 >-150 300 600 1710-1880 1710-1880 16.1/14

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1990x280x125 (66x11x5) Pre-mounted heavy duty brackets 15.3 (33.7) 9.8 (21.6) 636 42 (93) 55 (123) DC grounded GRP Light gray 2160x355x255 (71x12x10) 18.3 (40.3) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08151 Rev A

Updated: 2009-07-28

389

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Dual Band Antennas

POWERWAVE

DBB90 Cross Polarized Antennas, 824-896/1710-2170 MHz

Dual Band Antennas


Cross Polarized DBB90 Cross Polarized Antennas, 824-896/1710-2170 MHz

Horizontal Beamwidth 90 90 90

Gain dBi dBd 13.5/11.4, 15.5/13.4 15/12.9, 16/13.9 16/13.9, 16/13.9

Tilt MET MET MET

Length 1.4m (47) 2.0m (66) 2.0m (66)

Part Number 7770.00A 7772.00A 7775.00A

Page 391 392 393

390

POWERWAVE

Dual Band Antennas

7770.00A

DBB90 Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 824-896, 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.5/11.4, 15.5/13.4 TILT: MET LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 824-896 824-896 13.5/11.4 Dual linear 45 50 <1.5:1 85 15 0 to 10 >18 >30 >36 <2 <1.0 >25 >22 >10 <-153 500 800 <2 <0.5 >25 >21 >10 >18 >30 90 7 1710-1880 15.5/13.4 1710-2170 1850-1990 15.5/13.4 Dual linear 45 50 <1.5:1 90 7 0 to 8 >18 >30 >36 <2 <0.5 >25 >21 >10 <-153 <-160 250 500 <2 <0.5 >25 >21 >10 >18 >25 90 7 1900-2170 15.5/13.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 1408x280x125mm Pre-mounted heavy duty brackets 17.6 (39) 12.1 (27) 415 42 (93) 55 (123) DC grounded GRP 1550x355x255 (61x12x10) Light Grey 21.5 (47.4) 8220.10, 8220.40, 8210.10, 8210.40 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visithttp://www.powerwave.com/rpa/.

Updated: 2009-07-28

391

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7772.00A

DBB90 Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 824-896, 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 15/12.9, 16/13.9 TILT: MET LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 824-896 824-896 15/12.9 Dual linear 45 50 <1.5:1 85 9.5 0 to 7 >17 >30 >38 <1 <1.0 >25 >22 >10 <-153 400 800 <2 <0.5 >25 >21 >9 >15 >30 90 6.5 1710-1880 16/13.9 1710-2170 1850-1990 16/13.9 Dual linear 45 50 <1.5:1 90 6.5 0 to 8 >15 >30 >38 <2 <0.5 >25 >21 >9 <-153 250 500 <2 <0.5 >25 >21 >9 >15 >25 90 6.5 1900-2170 16/13.9

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 2033x280x125mm Pre-mounted heavy duty brackets 19.8 (44) 16.0 (35) 653 42 (93) 55 (123) DC grounded GRP 2175x355x255 (72x14x10) Light Grey 27 (59.5) 8220.10, 8220.40, 8210.10, 8210.40 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visithttp://www.powerwave.com/rpa/.

Updated: 2009-07-28

392

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7775.00A

DBB90 Broadband Cross Polarized

POLARIZATION: XX-Pol FREQUENCY (MHz): 824-896, 1710-2170 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16/13.9, 16/13.9 TILT: MET LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 824-896 824-896 16/13.9 Dual linear 45 50 <1.5:1 85 7 0 to 6 >16 >30 >36 <1 <0.5 >25 >23 >12 <-153 400 800 <2 <0.5 >25 >21 >9 >16 >30 90 6.5 1710-1880 16/13.9 1710-2170 1850-1990 16/13.9 Dual linear 45 50 <1.5:1 90 6.5 0 to 8 >16 >30 >36 <2 <0.5 >25 >21 >9 <-153 250 500 <2 <0.5 >25 >21 >9 >16 >25 90 6.5 1900-2170 16/13.9

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 2658x280x125mm Pre-mounted heavy duty brackets 25.1 (55) 19.6 (43) 880 42 (93) 55 (123) DC grounded GRP 2800x355x255 (92x12x10) Light Grey 32.5 (71.6) 8220.10, 8220.40, 8210.10, 8210.40 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visithttp://www.powerwave.com/rpa/.

Updated: 2009-07-28

393

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Dual Band Antennas

POWERWAVE

ALVC Vertical Polarized Antennas, 806-896/1850-1990 MHz

Dual Band Antennas


Vertical Polarized ALVC Vertical Polarized Antennas, 806-896/1850-1990 MHz

Horizontal Beamwidth 65 70 70 70 80 80 90 90 90 90 90

Gain dBi dBd 14.5/12.4, 17.5/15.4 14.5/12.4, 17.5/15.4 14.5/12.4, 17.5/15.4 14.5/12.4, 17.5/15.4 14.0/11.9, 17.0/14.9 14.0/11.9, 17.0/14.9 13.5/12.4, 16.5/14.4 13.5/12.4, 16.5/14.4 13.5/12.4, 16.5/14.4 13.5/12.4, 16.5/14.4 14.0/11.9, 17.0/14.9

Tilt MET FET FET FET FET FET FET FET FET FET FET

Length 1.3m (4'3") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 1.4m (4'7") 1.3m (4'3")

Part Number 7840.00 7333.02B 7333.00B 7333.06B 7332.02B 7332.06B 7334.02B 7332.00B 7334.00B 7334.06B 7850.00B

Page 395 396 397 398 399 400 401 402 403 404 405

394

POWERWAVE

Dual Band Antennas

7840.00

ALVC Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.5/12.4, 17.5/15.4 TILT: MET LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 824-896 14/11.9 Vertical linear 50 <1.4:1 73 15 0-12 >15 <0.5 >25 <-150 400 1850-1990 1850-1990 17.5/15.4 Vertical linear 50 <1.4:1 68 7 0-8 >15 -18 <0.5 >25 <-150 200

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1331x280x125 (44x11x5) Pre-mounted heavy duty brackets 17.5 (38.5) 12 (26.4) 388 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1495x355x255 (411x12x10) 15.8 (34.8) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-

Updated: 2010-03-31

395

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7333.02B

ALVC Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 70 GAIN (dBi/dBd): 14.5/12.4, 17.5/15.4 TILT: FET LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 14.8/12.7 Vertical linear 50 <1.4:1 72 15 2 >16/16 <0.5 >28 <-150 350 1850-1990 1850-1990 17.6/15.5 Vertical linear 50 <1.4:1 71 7 2 >16/16 -17 <0.5 >28 <-150 175

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN Female Bottom 1350x280x125 (45x11x5) Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 394 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5x12x10) 13.9 (30.6) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08154 Rev. A

Updated: 2010-03-31

396

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7333.00B

ALVC Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 70 GAIN (dBi/dBd): 14.5/12.4, 17.5/15.4 TILT: FET LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 14.8/12.7 Vertical linear 50 <1.4:1 72 15 0 >16 <0.5 >28 <-150 350 1850-1990 1850-1990 17.6/15.5 Vertical linear 50 <1.4:1 70 7 0 >16 -17 <0.5 >28 <-150 175

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN Female Bottom 1350x280x125 (45x11x5) Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 394 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5x12x10) 13.9 (30.6) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08154 Rev A

Updated: 2010-03-31

397

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7333.06B

ALVC Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 70 GAIN (dBi/dBd): 14.5/12.4, 17.5/15.4 TILT: FET LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 14.8/12.7 Vertical linear 50 <1.4:1 72 15 6 >16/16 <0.5 >28 <-150 350 1850-1990 1850-1990 17.6/15.5 Vertical linear 50 <1.4:1 71 7 6 >16/16 -17 <0.5 >28 <-150 175

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN Female Bottom 1350x280x125 (45x11x5) Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 394 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5x12x10) 13.9 (30.6) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08155 Rev A

Updated: 2010-03-31

398

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7332.02B

ALVC Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 80 GAIN (dBi/dBd): 14.0/11.9, 17.0/14.9 TILT: FET LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 14/11.9 Vertical linear 50 <1.4:1 81 15.5 2 >16 <0.5 >27 <-150 350 1850-1990 1850-1990 17.2/15.1 Vertical linear 50 <1.4:1 79 7 2 >16 -17 <0.5 >27 <-150 350

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN Female Bottom 1350x280x125 (45x11x5) Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 394 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5x12x10) 13.9 (30.6) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08152 Rev. A

Updated: 2010-03-31

399

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7332.06B

ALVC Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 80 GAIN (dBi/dBd): 14.0/11.9, 17.0/14.9 TILT: FET LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 14/11.9 Vertical linear 50 <1.4:1 81 15.5 6 >16 <0.5 >27 <-150 350 1850-1990 1850-1990 17.2/15.1 Vertical linear 50 <1.4:1 79 7 6 >16 -17 <0.5 >27 <-150 350

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN Female Bottom 1350x280x125 (45x11x5) Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 394 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5x12x10) 13.9 (30.6) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08153 Rev A

Updated: 2010-03-31

400

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7334.02B

ALVC Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.5/12.4, 16.5/14.4 TILT: FET LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 13.5/11.4 Vertical linear 50 <1.4:1 89 15 2 >16/16 <0.5 >26 <-150 350 1850-1990 1850-1990 16.5/14.4 Vertical linear 50 <1.4:1 91 7 2 >16/16 -17 <0.5 >26 <-150 175

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN Female Bottom 1350x280x125 (45x11x5) Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 394 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5x12x10) 13.9 (30.6) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08156 Rev. A

Updated: 2010-03-31

401

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7332.00B

ALVC Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.5/12.4, 16.5/14.4 TILT: FET LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 13.5/12.4 Vertical linear 50 <1.4:1 89 15 2 >16 <0.5 >26 <-150 350 1850-1990 1850-1990 17.6/15.516.5/14.4 Vertical linear 50 <1.4:1 91 7 2 >16 -17 <0.5 >26 <-150 175

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN Female Bottom 1350x280x125 (45x11x5) Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 394 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5x12x10) 13.9 (30.6) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08152 Rev A

Updated: 2010-03-31

402

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7334.00B

ALVC Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.5/12.4, 16.5/14.4 TILT: FET LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 14/11.9 Vertical linear 50 <1.4:1 89 15 0 >16 <0.5 >26 <-150 350 1850-1990 1850-1990 16.5/14.4 Vertical linear 50 <1.4:1 91 7 0 >16 -17 <0.5 >26 <-150 175

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN Female Bottom 1350x280x125 (45x11x5) Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 394 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5x12x10) 13.9 (30.6) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08156 Rev A

Updated: 2010-03-31

403

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7334.06B

ALVC Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 13.5/12.4, 16.5/14.4 TILT: FET LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 13.5/11.4 Vertical linear 50 <1.4:1 89 15 6 >16/16 <0.5 >26 <-150 350 1850-1990 1850-1990 16.5/14.4 Vertical linear 50 <1.4:1 91 7 6 >16/16 -17 <0.5 >26 <-150 175

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

1 x 7/16 DIN Female Bottom 1350x280x125 (45x11x5) Pre-mounted heavy duty brackets 14.9 (32.8) 9.4 (20.7) 394 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1520x355x200 (5x12x10) 13.9 (30.6) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08157 Rev A

Updated: 2010-03-31

404

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual Band Antennas

7850.00B

ALVC Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 806-896, 1850-1990 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 14.0/11.9, 17.0/14.9 TILT: 0-12/0-8 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) 806-896 806-896 13.8/11.7 Vertical linear 50 <1.5:1 90 15 0-12 >18 <0.5 >26 <-150 400 1850-1990 1850-1990 16/13.9 Vertical linear 50 <1.5:1 90 6.5 0-8 >18 -18 <0.5 >26 <-150 200

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1331x280x125 (44x11x5) Pre-mounted heavy duty brackets 17.5 (38.5) 12 (26.4) 388 42 (93) 55 (198) DC grounded GRP Light gray RAL 7035 on all visible plastic parts 1495x355x255 (411x12x10) 15.8 (34.8) 7256.00, 7454.00, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08181 Rev A

Updated: 2010-04-09

405

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

iRET Antennas

Power wave

The iRET antenna family is the next iteration of Powerwaves innovative antenna product line, which integrates remote electrical tilt functionality under the antenna radome, delivering maximized functionality and improved aesthetics, while eliminating installation and reliability issues that can occur with typical exterior RET modules.

iRET Antennas

POWERWAVE

iRET Antennas

Page Low Broadband Cross Polarized iRET Antennas, 698-894MHz Dual Broadband Cross Polarized iRET Antennas, 698-894/1710-2170MHz Triple High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz High Broadband Cross Polarized iRET Antennas, 2300-2700MHz Dual High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700MHz Dual High Broadband Cross Polarized iRET Antennas, 2300-2700MHz 408 415 422 448 452 455 458 460

407

iRET Antennas

POWERWAVE

Low Broadband Cross Polarized iRET Antennas, 698-894 MHz

iRET Antennas
Cross Polarized Low Broadband Cross Polarized iRET Antennas, 698-894 MHz

Horizontal Beamwidth 65 65 65 85 90 90

Gain dBi dBd 14.7/12.6 15.5/13.4 17.0/14.9 13.7/11.6 14.7/12.6 16.1/14.0

Tilt 0-13 2-10 0-6 2-15 2-11 0-6

Length 1.3m(51) 1.8m(72) 2.4m(96) 1.2m(48) 1.8m(72) 2.4m(96)

Part Number P65-15-XL-R P65-16-XL-R P65-17-XL-R P90-14-XL-R P90-15-XL-R P90-16-XL-R

Page 409 410 411 412 413 414

408

POWERWAVE

Low Broadband Antennas

P65-15-XL-R

Very Low Broadband Antennas

POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.7/12.6 TILT: 0-13 LENGTH: 51 (1295mm)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Electrical Downtilt Range Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 698-806 14.0/11.9 Dual Linear +/- 45 50 < 1.5:1 70 17.5 > 16 > 30 <2 0 - 13 < 0.5 > 25 > 22 > 15 > 10 <-153 500 1000 698-894 806-894 14.7/12.6 Dual Linear +/- 45 50 < 1.5:1 63 15.5 > 16 > 30 <2 0 - 13 < 0.5 > 25 > 22 > 15 >8 <-153 500 1000

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, in (mm) Mounting Weight, with brackets, lbs (kg) Weight, without brackets, lbs (kg)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)

2 X 7/16 DIN Female Bottom 51 x 12 x 6 (1295 x 305 x 152) Pre-mounted tilt brackets 36 (16) 25 (11) 920 100 (45) 150 (67) DC Ground -40C to +60C PVC 58 x 16 x 10 (1475 x 400 x 255) Light Grey 44 (20) iRET AISGv1.1, MET and AISGv2.0 Available 7256.00, 7454.00

Maximum operational wind speed, mph (m/s) Survival wind speed, mph (m/s) Lightning protection Operating Temperature Radome material Packet size, HxWxD, in (mm) Radome colour Shipping weight, lbs (kg) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-12-03

Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

409

POWERWAVE

Low Broadband Antennas

P65-16-XL-R

Very Low Broadband Antennas

POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.5/13.4 TILT: 2 - 10 LENGTH: 72

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Tracking, horizontal plane 60 (dB) Isolation between inputs (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) < 0.8 > 30 > 21 > 15 > 10 <-153 500 1000 < 0.8 > 30 > 25 > 15 > 10 > 15 <2 > 30 71 14 2 - 10 > 15 <2 > 30 698-806 14.8/12.7 Dual Linear +/- 45 50 < 1.4:1 65 12 698-894 806-894 15.5/13.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, in (mm) Mounting Weight, with brackets, lbs (kg) Weight, without brackets, lbs (kg)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)

2 X 7/16 DIN Female IP67 Bottom 72 x 12 x 6 (1829 x 305 x 152) Pre-mounted Tilt Brackets 55 (25) 44 (20) 1380 100 (45) 150 (67) DC Ground -40C to +60C PVC IP55 87 x 16 x 10 (2082 x 400 x 255) Light Grey 66 (30) iRET AISGv1.1, MET and AISGv2.0 7256.00, 7454.00

Maximum operational wind speed, mph (m/s) Survival wind speed, mph (m/s) Lightning protection Operating Temperature Radome material Packet size, HxWxD, in (mm) Radome colour Shipping weight, lbs (kg) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-12-03

Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

410

POWERWAVE

Low Broadband Antennas

P65-17-XL-R

Very Low Broadband Antennas

POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.0/14.9 TILT: 0-6 LENGTH: 96 (2438mm)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Electrical Downtilt Range Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 698-806 16.5/14.4 Dual Linear +/- 45 50 < 1.5:1 70 9.5 > 15 > 30 <2 0-6 < 0.5 > 24 > 22 > 15 >9 <-153 500 1000 698-894 806-894 17.0/14.9 Dual Linear +/- 45 50 < 1.5:1 61 8 > 15 > 30 <2 0-6 < 0.5 > 21 > 22 > 15 > 6.5 <-153 500 1000

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, in (mm) Mounting Weight, with brackets, lbs (kg) Weight, without brackets, lbs (kg)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)

2 X 7/16 DIN Female Bottom 96 x 12 x 6 (2438 x 305 x 152) Pre-mounted tilt brackets 59 (27) 48 (22) 1840 100 (45) 150 (67) DC Ground -40 - +70C PVC 107 x 16 x 10 (2725 x 400 x 255) Light Grey 70 (32) iRET AISGv1.1, MET and AISGv2.0 Available 7256.00, 7454.00

Maximum operational wind speed, mph (m/s) Survival wind speed, mph (m/s) Lightning protection Operating Temperature Radome material Packet size, HxWxD, in (mm) Radome colour Shipping weight, lbs (kg) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-12-05

Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

411

POWERWAVE

Low Broadband Antennas

P90-14-XL-R

Very Low Broadband Antennas

POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 85 GAIN (dBi/dBd): 13.7/11.6 TILT: 2 - 15 LENGTH: 48

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Electrical Downtilt Range Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 698-806 13.0/10.9 Dual Linear +/- 45 50 < 1.4:1 83 18 >20 > 30 <2 2 - 15 < 1.25 > 25 > 22 > 15 > 10 < -153 500 1000 698-894 806-894 13.7/11.6 Dual Linear +/- 45 50 < 1.4:1 81 15 >20 > 30 <2 2 - 15 < 1.25 > 25 > 22 > 15 > 10 < -153 500 1000

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, in (mm) Mounting Weight, with brackets, lbs (kg) Weight, without brackets, lbs (kg)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)

2 x 7/16 DIN Female, IP67 Bottom 48 x 12 x 6 (1219 x 305 x 152) Pre-mounted tilt brackets 36 (16) 25 (11) 920 100 (45) 150 (67) DC Ground -40C to +60C PVC, IP55 58 x 16 x 10 (1475 x 400 x 255) Light Grey 44 (20) iRET AISGv1.1, MET and AISGv2.0 Available 7256.00, 7454.00

Maximum operational wind speed, mph (m/s) Survival wind speed, mph (m/s) Lightning protection Operating Temperature Radome material Packet size, HxWxD, in (mm) Radome colour Shipping weight, lbs (kg) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-12-05

Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

412

POWERWAVE

Low Broadband Antennas

P90-15-XL-R

Very Low Broadband Antennas

POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 14.7/12.6 TILT: 2-11 LENGTH: 72

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Tracking, horizontal plane 60 (dB) Isolation between inputs (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) < 0.8 > 17 > 22 > 15 10 < -153 500 1000 < 0.8 > 24 > 22 > 15 10 > 15 <2 > 30 90 14.9 2-11 > 16 <2 > 30 698-806 13.8/11.7 Dual Linear +/- 45 50 < 1.4:1 81 12.2 698-894 806-894 14.7/12.6

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, in (mm) Mounting Weight, with brackets, lbs (kg) Weight, without brackets, lbs (kg)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)

2 x 7/16 DIN Female Bottom 72 x 12 x 6 (1829 x 305 x 186) Pre-mounted Tilt Brackets 55 (25) 44 (20) 1380 100 (45) 150 (67) DC Ground -40C to +60C PVC 87 x 16 x 10 (2082 x 400 x 255) Light Grey 66 (30) iRET AISGv1.1, MET and AISGv2.0 7256.00, 7454.00

Maximum operational wind speed, mph (m/s) Survival wind speed, mph (m/s) Lightning protection Operating Temperature Radome material Packet size, HxWxD, in (mm) Radome colour Shipping weight, lbs (kg) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-12-05

Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

413

POWERWAVE

Low Broadband Antennas

P90-16-XL-R

Very Low Broadband Antennas

POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.1/14.0 TILT: 0-6 LENGTH: 96 (2438mm)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) Electrical Downtilt Range Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 698-806 15.4/13.3 Dual Linear +/- 45 50 < 1.4:1 86 9.7 > 16 > 30 <2 0-6 < 0.5 > 17 > 22 > 15 10 <-153 500 1000 698-894 806-894 16.1/14.0 Dual Linear +/- 45 50 < 1.4:1 81 7.7 > 16 > 30 <2 0-6 < 0.5 > 25 > 22 > 15 10 <-153 500 1000

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, in (mm) Mounting Weight, with brackets, lbs (kg) Weight, without brackets, lbs (kg)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)

2 X 7/16 DIN Female Bottom 96 x 12 x 7 (2438 x 305 x 182) Pre-mounted tilt brackets 59 (27) 48 (22) 1840 100 (45) 150 (67) DC Ground -40C to +70C PVC 107 x 16 x 10 (2725 x 400 x 255) Light Grey 70 (32) iRET AISGv1.1, MET and AISGv2.0 Available 7256.00, 7454.00

Maximum operational wind speed, mph (m/s) Survival wind speed, mph (m/s) Lightning protection Operating Temperature Radome material Packet size, HxWxD, in (mm) Radome colour Shipping weight, lbs (kg) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-12-05

Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

414

iRET Antennas

POWERWAVE

Dual Broadband Cross Polarized iRET 698-894/1710-2170MHz

iRET Antennas
Cross Polarized Dual Broadband Cross Polarized iRET Antennas 698-894/1710-2170MHz

Horizontal Beamwidth 65, 65 65, 65 65, 65 85, 85 90, 90 90, 90

Gain dBi dBd 14.7/12.6, 17.0/14.9 15.5/13.4 17.5/15.4 17.2/15.1 17.5/15.4 13.7/11.6 15.7/13.6 14.5/12.4 16.3/14.2 16.1/14.0 16.3/14.2

Tilt 0-13/0-9 2-10/0-10 0-6/0-10 0-13/0-8 0-11/0-8 0-6/0-8

Length 1.3m (51) 1.8m (72) 2.4m (96) 1.2m (48) 1.8m (72) 2.4m (96)

Part Number P65-15-XLH-RR P65-16-XLH-RR P65-17-XLH-RR P90-14-XLH-RR P90-15-XLH-RR P90-16-XLH-RR

Page 416 417 418 419 420


421

415

POWERWAVE

Dual Broadband Antennas

P65-15-XLH-RR

Dual Broadband Antennas

POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894, 1710-2170 HORIZONTAL BEAM WIDTH (): 65, 65 GAIN (dBi/dBd): 14.7/12.6, 17.0/14.9 TILT: 0-13, 0-9 LENGTH: 51

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 73 17 0-13 > 14 >30 > 40 <2 <1.25 > 25 > 25 > 15 > 10 -153 500 1000 698-806 14/11.9 50 < 1.5:1 63 65 698-894 806-894 14.7/12.6 1710-1880 16.4/14.3 1710-2170 1850-1990 16.7/14.6 Dual Linear +/- 45 50 < 1.5:1 61 7.5 0-9 >20 > 30 > 40 <2 < 0.5 > 28 > 25 > 15 > 10 -153 300 600 60 1900-2170 17.0/14,9

Dual Linear +/- 45

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, in (mm) Mounting Weight, with brackets, lbs (kg) Weight, without brackets, lbs (kg)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)

4 X 7/16 DIN Female, IP67 Bottom 51 x 12 x 6 (1295 x 305 x 152) Pre-mounted Tilt Brackets 41 (19) 30 (14) 920 100 (45) 150 (67) DC Ground -40C to +60C PVC, IP55 60 x 16 x 10 (1524 x 400 x 255) Light Grey 52 (24) iRET AISGv1.1, MET and AISGv2.0 7256.00, 7454.00, 2210.00

Maximum operational wind speed, mph (m/s) Survival wind speed, mph (m/s) Lightning protection Operating Temperature Radome material Packet size, HxWxD, in (mm) Radome colour Shipping weight, lbs (kg) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-07-02

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

416

POWERWAVE

Dual Broadband Antennas

P65-16-XLH-RR

Dual Broadband Antennas

POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894, 1710-2170 HORIZONTAL BEAM WIDTH (): 65, 65 GAIN (dBi/dBd): 15.5/13.4 17.5/15.4 TILT: 2-10, 0-10 LENGTH: 72

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 500 1000 250 500 -153 -153 > 15 > 10 > 15 > 10 > 15 > 10 > 15 > 10 > 15 > 10 < 0.8 >24 < 0.8 >24 <2
> 16 >16

698-894 698-806 14.8/12.7 50 < 1.5:1 66 14.7 2 to 10


>16 >16 > 16

1710-2170 806-894 15.5/13.4 1710-1880 16.9/14.8 1850-1990 17.2/15.1 Dual Linear +/- 45 50 < 1.5:1 65 12.5 60 6.8 63 6.4 0 to 10 63 5.7 1900-2170 17.5/15.4

Dual Linear +/- 45

> 30 > 40

> 30

> 30 <2 20 < 0.5 > 30

> 30 > 40 <2 20 < 0.5 >30 <2 20 < 0.5 >28

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 X 7/16 DIN Female, IP67 Bottom 72 x 12 x 6 (1829 x 305 x 152) Pre-mounted Tilt Brackets 29 (64) 24 (53) 1380 100 (45) 150 (67) DC Ground -40C to +60C PVC, IP55 87 x 16 x 10 (2225 x 400 x 225) Light Grey 34 (75) iRET AISGv1.1, MET and AISGv2.0 7256.00, 7454.00, 2210.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-10-29

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

417

POWERWAVE

Dual Broadband Antennas

P65-17-XLH-RR

Dual Broadband Antennas

POLARIZATION: Dual linear 45 FREQUENCY (MHz): 698-894, 1710-2170 HORIZONTAL BEAM WIDTH (): 65, 65 GAIN (dBi/dBd): 17.2/15.1 17.5/15.4 TILT: 0-6, 0-10 LENGTH: 96

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 70 8.4 0 to 6 > 16 > 30 > 40 <2 < 0.5 25 22 > 15 10 -153 500 1000 <2 < 0.5 > 30 > 25 > 15 10 -153 300 600 698-806 16.4/14.3 50 < 1.5:1 63 60 698-894 806-894 17.2/15.1 1710-1880 16.9/14.8 1710-2170 1850-1990 17.2/15.1 Dual Linear +/- 45 50 < 1.5:1 63 6.5 0 to 10 > 16 > 30 60 1900-2170 17.5/15.4

Dual Linear +/- 45

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, in (mm) Mounting Weight, with brackets, lbs (kg) Weight, without brackets, lbs (kg)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)

4 X 7/16 DIN Female Bottom 96 x 12 x 6 (2438 x 305 x 152) Pre-mounted Tilt Brackets 70 (32) 59 (27) 1840 100 (45) 150 (67) DC Ground PVC 107 x 16 x 10 (2725 x 400 x 255) Light Grey 81 (37) iRET AISGv1.1, MET and AISGv2.0 Available 7256.00, 7454.00, 2210.00

Maximum operational wind speed, mph (m/s) Survival wind speed, mph (m/s) Lightning protection Operating Temperature Radome material Packet size, HxWxD, in (mm) Radome colour Shipping weight, lbs (kg) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-05-07

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

418

POWERWAVE

Dual Broadband Antennas

P90-14-XLH-RR

Dual Broadband Antennas

POLARIZATION: Dual Linear 45 FREQUENCY (MHz): 698-894, 1710-2170 HORIZONTAL BEAM WIDTH (): 85,85 GAIN (dBi/dBd): 13.7/11.6 15.7/13.6 TILT: 0-13, 0-8 LENGTH: 48

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 86 15.0 0-13 > 12 > 30 > 40 <2 < 1.25 > 25 > 22 > 10 > 10 -153 500 1000 <2 < 0.5 > 25 > 22 > 15 > 10 -153 300 600 698-806 13.0/10.9 50 < 1.5:1 83 85 698-894 806-894 13.7/11.6 1710-1880 15.1/13.0 1710-2170 1850-1990 15.4/13.3 Dual Linear +/- 45 50 < 1.5:1 84 7.0 0-8 > 16 > 28 85 1900-2170 15.7/13.6

Dual Linear +/- 45

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, in (mm) Mounting Weight, with brackets, lbs (kg) Weight, without brackets, lbs (kg)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)

4 x 7/16 DIN Female, IP67 Bottom 48 x 12 x 7.3 (1219 x 305 x 186) Pre-mounted Tilt Brackets 41 (19) 30 (14) 920 100 (45) 150 (67) DC Ground -40C to +60C PVC, IP55 60 x 16 x 10 (1524 x 400 x 255) Light Grey 52 (24) iRET AISGv1.1, MET and AISGv2.0 Available 7256.00, 7454.00, 2210.00

Maximum operational wind speed, mph (m/s) Survival wind speed, mph (m/s) Lightning protection Operating Temperature Radome material Packet size, HxWxD, in (mm) Radome colour Shipping weight, lbs (kg) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-07-02

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

419

POWERWAVE

Dual Broadband Antennas

P90-15-XLH-RR

Dual Broadband Antennas

POLARIZATION: Dual Linear 45 FREQUENCY (MHz): 698-894, 1710-2170 HORIZONTAL BEAM WIDTH (): 90, 90 GAIN (dBi/dBd): 14.5/12.4 16.3/14.2 TILT: 0-11, 0-8 LENGTH: 72

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 500 1000 300 600 -153 -153 < 0.8 25 22 > 15 10 < 0.8 25 22 > 15 10 < 0.5 > 23 > 22 > 15 10 < 0.5 > 27 > 22 > 15 10 < 0.5 > 30 > 22 > 15 10 <2
> 16

698-894 698-806 13.8/11.7 50 < 1.5:1 86 14 0 to 11


>16 >18

1710-2170 806-894 14.5/12.4 1710-1880 15.7/13.6 1850-1990 16.0/13.9 Dual Linear +/- 45 50 < 1.5:1 84 12 88 7 80 6.5 0 to 8
>17 >15

1900-2170 16.3/14.2

Dual Linear +/- 45

80 6

> 30 > 40

> 30 <2

> 30 <2

> 30 > 40 <2

> 30 <2

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female, Extended Shank Bottom 1829 x 305 x 186 (72 x 12 x 7.3) Pre-mounted Tilt Brackets 29 (64) 24 (53) 1380 100 (45) 150 (67) DC Ground -40 to +70C PVC 2225 x 400 x 225 (87 x 16 x 10) Light Grey 34 (75) iRET AISGv1.1, MET and AISGv2.0 Available 7256.00, 7454.00, 2210.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-11-04

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

420

POWERWAVE

Dual Broadband Antennas

P90-16-XLH-RR

Dual Broadband Antennas

POLARIZATION: Dual Linear 45 FREQUENCY (MHz): 698-894, 1710-2170 HORIZONTAL BEAM WIDTH (): 90, 90 GAIN (dBi/dBd): 16.1/14.0 16.3/14.2 TILT: 0-6, 0-8 LENGTH: 96

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 500 1000 300 600 -153 -153 < 0.8 25 22 > 15 10 < 0.8 25 22 > 15 10 < 0.5 >21 > 22 > 15 10 < 0.5 >24 > 22 > 15 10 < 0.5 >27 > 22 > 15 10 <2
> 16

698-894 698-806 15.4/13.3 50 < 1.5:1 83 9 0-6


>16 >16

1710-2170 806-894 16.1/14.0 1710-1880 15.7/13.6 1850-1990 16.0/13.9 Dual Linear +/- 45 50 < 1.5:1 84 8.7 87 6 84 6.6 0-8
>16 >16

1900-2170 16.3/14.2

Dual Linear +/- 45

83 6

> 30 > 40

> 30 <2

> 30 <2

> 30 > 40 <2

> 30 <2

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female, Extended Shank Bottom 2438 X 305 X 152 (96 X 12 X 6) Pre-mounted Tilt Brackets 32 (70) 27 (59) 1849 100 (45) 150 (67) DC Ground -40 to +70C PVC 2725 X 400 X 255 (107 X 16 X 10) Light Grey (37) 81 iRET AISGv1.1, MET and AISGv2.0 Available 7256.00, 7454.00, 2210.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-05-10

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

421

iRET Antennas

POWERWAVE

Triple Broadband Cross Polarized iRET Antennas, 1710-2170 MHz

iRET Antennas
Cross Polarized Triple Broadband Cross Polarized Antennas, 1710-2170 MHz

Horizontal Beamwidth 65
65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65

Gain dBi dBd 18.3/16.2, 18.3/16.2, 18.3/16.2 18.3/16.2, 18.3/16.2, 18.3/16.2 17.7/15.6, 17.9/15.8, 18.1/16.0 14.7/12.6, 14.6/12.5, 14.6/12.5 14.7/12.6, 14.6/12.5, 14.6/12.5 14.7/12.6, 14.6/12.5, 14.6/12.5 14.7/12.6, 14.6/12.5, 14.6/12.5 14.7/12.6, 14.6/12.5, 14.6/12.5 16.2/14.1, 16.5/14.4, 16.5/14.4 14.7/12.6, 14.6/12.5, 14.6/12.5 16.2/14.1, 16.5/14.4, 16.5/14.4 16.2/14.1, 16.5/14.4, 16.5/14.4 16.2/14.1, 16.5/14.4, 16.5/14.4 16.2/14.1, 16.5/14.4, 16.5/14.4 16.2/14.1, 16.5/14.4, 16.5/14.4 16.2/14.1, 16.5/14.4, 16.5/14.4 16.2/14.1, 16.5/14.4, 16.5/14.4 17.4/15.3, 17.2/15.1, 17.5/15.4 17.4/15.3, 17.2/15.1, 17.5/15.4 17.4/15.3, 17.2/15.1, 17.5/15.4 17.4/15.3, 17.2/15.1, 17.5/15.4 17.4/15.3, 17.2/15.1, 17.5/15.4

Tilt

Length

Part Number 8763.0ST.0000.00


8763.0ST.B100.00 8763.0ST.B400.00

Page
424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445

0-10/0-10/0-10 1.3m(43) 0-10/0-10/0-10 1.3m(43) 0-10/0-10/0-10 1.3m(43) 0-20/0-12/0-12 1.3m(43) 0-20/0-12/0-12 1.4m(47) 0-20/0-12/0-12 1.4m(47) 0-20/0-12/0-12 1.4m(47) 0-20/0-12/0-12 1.4m(47) 0-20/0-12/0-12 1.4m(47) 0-20/0-12/0-12 1.4m(47) 0-20/0-12/0-12 2.0m(66) 0-20/0-12/0-12 2.0m(66) 0-20/0-12/0-12 2.0m(66) 0-20/0-12/0-12 2.0m(66) 0-20/0-12/0-12 2.0m(66) 0-20/0-12/0-12 2.0m(66) 0-20/0-12/0-12 2.0m(66) 0-10/0-10/0-10 2.6m(86) 0-10/0-10/0-10 2.6m(86) 0-10/0-10/0-10 2.6m(86) 0-10/0-10/0-10 2.6m(86) 0-10/0-10/0-10 2.6m(86)

8780.0ST.0000.00
8780.0ST.B100.00 8780.0ST.B100.02 8780.0ST.B100.04 8780.0ST.B400.00 8780.0ST.B400.02 8780.0ST.B400.04 8782.0ST.0000.00 8782.0ST.B100.00 8782.0ST.B100.02 8782.0ST.B100.04 8782.0ST.B400.00 8782.0ST.B400.02 8782.0ST.B400.04 8785.0ST.0000.00 8785.0ST.B100.00 8785.0ST.B100.02 8785.0ST.B100.04 8785.0ST.B400.00

422

iRET Antennas

POWERWAVE

Triple Broadband Cross Polarized iRET Antennas, 1710-2170 MHz

iRET Antennas
Cross Polarized Triple Broadband Cross Polarized Antennas, 1710-2170 MHz

Horizontal Beamwidth
65 65

Gain dBi dBd 17.4/15.3, 17.2/15.1, 17.5/15.4 17.4/15.3, 17.2/15.1, 17.5/15.4

Tilt

Length

Part Number
8785.0ST.B400.02 8785.0ST.B400.04

Page
446 447

0-10/0-10/0-10 2.6m(86) 0-10/0-10/0-10 2.6m(86)

423

POWERWAVE

Triple Broadband Antennas

8763.0ST.0000.00

i-RET ANTENNA THBB65 1.3m UXCM-17102170-65-18i/18i/18i-Ai-D

POLARIZATION: XXX-pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.3/16.2, 18.3/16.2, 18.3/16.2 TILT: 0-10/0-10/0-10 LENGTH: 1.3m(51)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 250 1500 <-153 <-153 <-160 >18,18,16,16,14,12 @0,2,4,6,8,10 >30 <1.0 >-24 typical >-17 0.5 >30 >27 >17 >18 67 7.0 1710-1880 17.6/15.5 1710-2170 1850-1990 18.0/15.9 Dual linear 45 50 <1.4:1 66 6.6 0-10 >18,18,16,16,14,12 @0,2,4,6,8,10 >30 <1.0 >-24 typical >-17 0.5 >30 >27 >17 >14 >18,18,16,16,14,12 @0,2,4,6,8,10 >30 <1.0 >-24 typical >-17 0.5 >30 >27 >20 >12 64 6.3 1920-2170 18.3/16.2

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female Bottom 1310 x 524 x 101 (52 x 21 x 4 inch) Pre-mounted standard brackets 27.1 (60) 21.6 (47.5) 800 / 75 / 884 42 (93) 70 (156) DC Grounded -40C to +60C ASA Light Grey 1550 x 610 x 229 (61 x 24 x 9 inch) 33.1 (73) No iRET module attached [8510.40] 7456.00A, 2210.10, 7455.00, 7458.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.02 / Mar 19 2010

Updated: 2010-04-09

424

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Triple Broadband Antennas

8763.0ST.B100.00

i-RET ANTENNA THBB65 1.3m UXCM-17102170-65-18i/18i/18i-Ai-D AISGv1.1

POLARIZATION: XXX-pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.3/16.2, 18.3/16.2, 18.3/16.2 TILT: 0-10/0-10/0-10 LENGTH: 1.3m(51)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 250 1500 <-153 <-153 <-160 >18,18,16,16,14,12 @0,2,4,6,8,10 >30 <1.0 >-24 typical >-17 0.5 >30 >27 >17 >18 67 7.0 1710-1880 17.6/15.5 1710-2170 1850-1990 18.0/15.9 Dual linear 45 50 <1.4:1 66 6.6 0-10 >18,18,16,16,14,12 @0,2,4,6,8,10 >30 <1.0 >-24 typical >-17 0.5 >30 >27 >17 >14 >18,18,16,16,14,12 @0,2,4,6,8,10 >30 <1.0 >-24 typical >-17 0.5 >30 >27 >20 >12 64 6.3 1920-2170 18.3/16.2

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 6xAISG [3x i-RET 8510.40] Bottom 1310 x 524 x 101 (52 x 21 x 4 inch) Pre-mounted standard brackets 28.6 (63) 23.1 (51) 800 / 75 / 884 42 (93) 70 (156) DC Grounded -40C to +60C ASA Light Grey 1550 x 610 x 229 (61 x 24 x 9 inch) 34.6 (76) AISG1.1 (AISG2.0/Ericsson) 7456.00A, 2210.10, 7455.00, 7458.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.02 / Mar 19 2010

Updated: 2010-04-09

425

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Triple Broadband Antennas

8763.0ST.B400.00

i-RET ANTENNA THBB65 1.3m UXCM-17102170-65-18i/18i/18i-Ai-D AISGv2.0

POLARIZATION: XXX-pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.3/16.2, 18.3/16.2, 18.3/16.2 TILT: 0-10/0-10/0-10 LENGTH: 1.3m(51)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 250 1500 <-153 <-153 <-160 >18,18,16,16,14,12 @0,2,4,6,8,10 >30 <1.0 >-24 typical >-17 0.5 >30 >27 >17 >18 67 7.0 1710-1880 17.6/15.5 1710-2170 1850-1990 18.0/15.9 Dual linear 45 50 <1.4:1 66 6.6 0-10 >18,18,16,16,14,12 @0,2,4,6,8,10 >30 <1.0 >-24 typical >-17 0.5 >30 >27 >17 >14 >18,18,16,16,14,12 @0,2,4,6,8,10 >30 <1.0 >-24 typical >-17 0.5 >30 >27 >20 >12 64 6.3 1920-2170 18.3/16.2

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 6xAISG [3x i-RET 8510.40] Bottom 1310 x 524 x 101 (52 x 21 x 4 inch) Pre-mounted standard brackets 28.6 (63) 23.1 (51) 800 / 75 / 884 42 (93) 70 (156) DC Grounded -40C to +60C ASA Light Grey 1550 x 610 x 229 (61 x 24 x 9 inch) 34.6 (76) AISG2.0 (AISG1.1/Ericsson) 7456.00A, 2210.10, 7455.00, 7458.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.02 / Mar19 2010

Updated: 2010-04-09

426

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Triple Broadband Antennas

8780.0ST.0000.00

i-RET ANTENNA TBB65 1.4m ALXT-824960/1710-2170-65-14.7i/15i/15i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5 TILT: 0-20/0-12/0-12 LENGTH: 1.4m(47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1 25 0.7 >27 >24 15 > 9.3 < 0.35 <-153
>18,17,16,16@ 2,4,8,12

824-960 806-894 14.1/12 50 <1.5:1 71 14.9 0 - 20


>17,16,15,14@ 2,4,8,12 >17,16,15,14@ 0,4,8,12

2x1710-2170 880-960 14.7/12.6 1710-1880 14.4/12.3 1850-1990 14.6/12.5 Dual linear 45 50 <1.5:1 67 13.9 65 13.3 64 12.6 0 - 12
>17,16,15,14@ 0,4,8,12 >17,16,15,14@ 0,4,8,12

1920-2170 14.8/12.7

Dual linear 45

64 12

>30 >38

>30 <2 25 0.7 >28 >24 14 >7.7 < 0.50

>30 <1.5 25 0.7 >28 >24 16 >6 < 0.55

>30 >38 <1.2 25 1 >28 >24 18 >5.5 < 0.74 <-153 <-160 250 500

>30 <4 25 1 >28 >24 18 > 5.5 < 0.74

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female Bottom 1408x280x155mm (47x11x6) Pre-mounted heavy duty brackets 17.5 (38.6) 12 (26.4) 415 42 (93) 55 (123) DC grounded ASA 1550x355x200 (51x12x7) Light Grey 21.5 (47.4) No iRET module attached 7256.00, 2210.10, 7454.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Dec 20 2009

Updated: 2010-06-29

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

427

POWERWAVE

Triple Broadband Antennas

8780.0ST.B100.00

i-RET ANTENNA TBB65 1.4m ALXT-824960/1710-2170-65-14.7i/15i/15i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5 TILT: 0-20/0-12/0-12 LENGTH: 1.4m(47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1 25 0.7 >27 >24 15 > 9.3 < 0.35 <-153
>18,17,16,16@ 2,4,8,12

824-960 806-894 14.1/12 50 <1.5:1 71 14.9 0 - 20


>17,16,15,14@ 2,4,8,12 >17,16,15,14@ 0,4,8,12

2x1710-2170 880-960 14.7/12.6 1710-1880 14.4/12.3 1850-1990 14.6/12.5 Dual linear 45 50 <1.5:1 67 13.9 65 13.3 64 12.6 0 - 12
>17,16,15,14@ 0,4,8,12 >17,16,15,14@ 0,4,8,12

1920-2170 14.8/12.7

Dual linear 45

64 12

>30 >38

>30 <2 25 0.7 >28 >24 14 >7.7 < 0.50

>30 <1.5 25 0.7 >28 >24 16 >6 < 0.55

>30 >38 <1.2 25 1 >28 >24 18 >5.5 < 0.74 <-153 <-160 250 500

>30 <4 25 1 >28 >24 18 > 5.5 < 0.74

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 6x AISG Bottom 1408x280x155mm (47x11x6) Pre-mounted heavy duty brackets 19 (42) 13.5 (30) 415 42 (93) 55 (123) DC grounded ASA 1550x355x200 (51x12x7) Light Grey 23 (50.7) AISG1.1 (AISG2.0/Ericsson) 7256.00, 2210.10, 7454.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Dec 20 2009

Updated: 2010-06-29

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

428

POWERWAVE

Triple Broadband Antennas

8780.0ST.B100.02

i-RET ANTENNA TBB65 1.4m ALXT-824960/1710-2170-65-14.7i/15i/15i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5 TILT: 0-20/0-12/0-12 LENGTH: 1.4m(47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1 25 0.7 >27 >24 15 > 9.3 < 0.35 <-153
>18,17,16,16@ 2,4,8,12

824-960 806-894 14.1/12 50 <1.5:1 71 14.9 0 - 20


>17,16,15,14@ 2,4,8,12 >17,16,15,14@ 0,4,8,12

2x1710-2170 880-960 14.7/12.6 1710-1880 14.4/12.3 1850-1990 14.6/12.5 Dual linear 45 50 <1.5:1 67 13.9 65 13.3 64 12.6 0 - 12
>17,16,15,14@ 0,4,8,12 >17,16,15,14@ 0,4,8,12

1920-2170 14.8/12.7

Dual linear 45

64 12

>30 >38

>30 <2 25 0.7 >28 >24 14 >7.7 < 0.50

>30 <1.5 25 0.7 >28 >24 16 >6 < 0.55

>30 >38 <1.2 25 1 >28 >24 18 >5.5 < 0.74 <-153 <-160 250 500

>30 <4 25 1 >28 >24 18 > 5.5 < 0.74

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 2x AISG Bottom 1408x280x155mm (47x11x6) Pre-mounted heavy duty brackets 18 (39.6) 12.5 (27.5) 415 42 (93) 55 (123) DC grounded ASA 1550x355x200 (51x12x7) Light Grey 22 (48.5) AISG1.1 (AISG2.0/Ericsson) on WHITE system 7256.00, 2210.10, 7454.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Dec 20 2009

Updated: 2010-06-29

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

429

POWERWAVE

Triple Broadband Antennas

8780.0ST.B100.04

i-RET ANTENNA TBB65 1.4m ALXT-824960/1710-2170-65-14.7i/15i/15i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5 TILT: 0-20/0-12/0-12 LENGTH: 1.4m(47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1 25 0.7 >27 >24 15 > 9.3 < 0.35 <-153
>18,17,16,16@ 2,4,8,12

824-960 806-894 14.1/12 50 <1.5:1 71 14.9 0 - 20


>17,16,15,14@ 2,4,8,12 >17,16,15,14@ 0,4,8,12

2x1710-2170 880-960 14.7/12.6 1710-1880 14.4/12.3 1850-1990 14.6/12.5 Dual linear 45 50 <1.5:1 67 13.9 65 13.3 64 12.6 0 - 12
>17,16,15,14@ 0,4,8,12 >17,16,15,14@ 0,4,8,12

1920-2170 14.8/12.7

Dual linear 45

64 12

>30 >38

>30 <2 25 0.7 >28 >24 14 >7.7 < 0.50

>30 <1.5 25 0.7 >28 >24 16 >6 < 0.55

>30 >38 <1.2 25 1 >28 >24 18 >5.5 < 0.74 <-153 <-160 250 500

>30 <4 25 1 >28 >24 18 > 5.5 < 0.74

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 4x AISG Bottom 1408x280x155mm (47x11x6) Pre-mounted heavy duty brackets 18.5 (40.9) 13 (28.6) 415 42 (93) 55 (123) DC grounded ASA 1550x355x200 (51x12x7) Light Grey 22.5 (49.6) AISG1.1 (AISG2.0/Ericsson) on RED & WHITE system 7256.00, 2210.10, 7454.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Dec 20 2009

Updated: 2010-06-29

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

430

POWERWAVE

Triple Broadband Antennas

8780.0ST.B400.00

i-RET ANTENNA TBB65 1.4m ALXT-824960/1710-2170-65-14.7i/15i/15i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5 TILT: 0-20/0-12/0-12 LENGTH: 1.4m(47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1 25 0.7 >27 >24 15 > 9.3 < 0.35 <-153
>18,17,16,16@ 2,4,8,12

824-960 806-894 14.1/12 50 <1.5:1 71 14.9 0 - 20


>17,16,15,14@ 2,4,8,12 >17,16,15,14@ 0,4,8,12

2x1710-2170 880-960 14.7/12.6 1710-1880 14.4/12.3 1850-1990 14.6/12.5 Dual linear 45 50 <1.5:1 67 13.9 65 13.3 64 12.6 0 - 12
>17,16,15,14@ 0,4,8,12 >17,16,15,14@ 0,4,8,12

1920-2170 14.8/12.7

Dual linear 45

64 12

>30 >38

>30 <2 25 0.7 >28 >24 14 >7.7 < 0.50

>30 <1.5 25 0.7 >28 >24 16 >6 < 0.55

>30 >38 <1.2 25 1 >28 >24 18 >5.5 < 0.74 <-153 <-160 250 500

>30 <4 25 1 >28 >24 18 > 5.5 < 0.74

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 6x AISG Bottom 1408x280x155mm (47x11x6) Pre-mounted heavy duty brackets 19 (42) 13.5 (30) 415 42 (93) 55 (123) DC grounded ASA 1550x355x200 (51x12x7) Light Grey 23 (50.7) AISG2.0 (AISG1.1/Ericsson) 7256.00, 2210.10, 7454.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-06-29

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

431

POWERWAVE

Triple Broadband Antennas

8780.0ST.B400.02

i-RET ANTENNA TBB65 1.4m ALXT-824960/1710-2170-65-14.7i/15i/15i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5 TILT: 0-20/0-12/0-12 LENGTH: 1.4m(47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1 25 0.7 >27 >24 15 > 9.3 < 0.35 <-153
>18,17,16,16@ 2,4,8,12

824-960 806-894 14.1/12 50 <1.5:1 71 14.9 0 - 20


>17,16,15,14@ 2,4,8,12 >17,16,15,14@ 0,4,8,12

2x1710-2170 880-960 14.7/12.6 1710-1880 14.4/12.3 1850-1990 14.6/12.5 Dual linear 45 50 <1.5:1 67 13.9 65 13.3 64 12.6 0 - 12
>17,16,15,14@ 0,4,8,12 >17,16,15,14@ 0,4,8,12

1920-2170 14.8/12.7

Dual linear 45

64 12

>30 >38

>30 <2 25 0.7 >28 >24 14 >7.7 < 0.50

>30 <1.5 25 0.7 >28 >24 16 >6 < 0.55

>30 >38 <1.2 25 1 >28 >24 18 >5.5 < 0.74 <-153 <-160 250 500

>30 <4 25 1 >28 >24 18 > 5.5 < 0.74

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 2x AISG Bottom 1408x280x155mm (47x11x6) Pre-mounted heavy duty brackets 18 (39.6) 12.5 (27.5) 415 42 (93) 55 (123) DC grounded ASA 1550x355x200 (51x12x7) Light Grey 22 (48.5) AISG2.0 (AISG1.1/Ericsson) on WHITE system 7256.00, 2210.10, 7454.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Dec 20 2009

Updated: 2010-06-29

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

432

POWERWAVE

Triple Broadband Antennas

8780.0ST.B400.04

i-RET ANTENNA TBB65 1.4m ALXT-824960/1710-2170-65-14.7i/15i/15i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5 TILT: 0-20/0-12/0-12 LENGTH: 1.4m(47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1 25 0.7 >27 >24 15 > 9.3 < 0.35 <-153
>18,17,16,16@ 2,4,8,12

824-960 806-894 14.1/12 50 <1.5:1 71 14.9 0 - 20


>17,16,15,14@ 2,4,8,12 >17,16,15,14@ 0,4,8,12

2x1710-2170 880-960 14.7/12.6 1710-1880 14.4/12.3 1850-1990 14.6/12.5 Dual linear 45 50 <1.5:1 67 13.9 65 13.3 64 12.6 0 - 12
>17,16,15,14@ 0,4,8,12 >17,16,15,14@ 0,4,8,12

1920-2170 14.8/12.7

Dual linear 45

64 12

>30 >38

>30 <2 25 0.7 >28 >24 14 >7.7 < 0.50

>30 <1.5 25 0.7 >28 >24 16 >6 < 0.55

>30 >38 <1.2 25 1 >28 >24 18 >5.5 < 0.74 <-153 <-160 250 500

>30 <4 25 1 >28 >24 18 > 5.5 < 0.74

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 4x AISG Bottom 1408x280x155mm (47x11x6) Pre-mounted heavy duty brackets 18.5 (40.9) 13 (28.6) 415 42 (93) 55 (123) DC grounded ASA 1550x355x200 (51x12x7) Light Grey 22.5 (49.6) AISG2.0 (AISG1.1/Ericsson) on RED & WHITE system 7256.00, 2210.10, 7454.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Dec 20 2009

Updated: 2010-06-29

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

433

POWERWAVE

Triple Broadband Antennas

8782.0ST.0000.00

i-RET ANTENNA TBB65 2.0m ALXT-824960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: 0-12/0-12/0-12 LENGTH: 2.0m(66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1.0 25 0.5 >28 >26 16 >11 <0.27 <-153
>18,17,16,16@ 2,5,7,8

824-960 806-894 15.8/13.7 50 <1.5:1 71 9.6 0-12


>18,17,16,16@ 2,5,7,8 >17,15,13@ 0,6,10

2x1710-2170 880-960 16.2/14.1 1710-1880 16.0/13.9 1850-1990 16.1/14 Dual linear 45 50 <1.5:1 67 8.6 65 10 65 9.4 0-12
>17,15,14@ 0,6,10 >17,16,15@ 0,6,10

1920-2170 16.5/14.4

Dual linear 45

63 8.7

>30 >34

>30 <1 25 0.5 >30 >26 15 >9.2 <0.47

>30 <1.5 25 0.5 >27 >25 16 >6.7 <0.52

>30 >34 <2 25 0.5 >28 >27 16 >6.3 <0.66 <-153 <-160 250 500

>30 <4 25 0.5 >30 >27 15 >6.3 <0.66

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female Bottom 2033x280x155mm (68x11x6) Pre-mounted standard brackets 21.9 (48.2) 16.4 (36.1) 653 42 (93) 55 (123) DC grounded ASA 2175x355x255 (72x14x10) Light Grey 26.5 (58.4) No iRET module attached 7256.00,7454.00A,2210.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.0 / Dec 20 2009

Updated: 2010-06-29

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

434

POWERWAVE

Triple Broadband Antennas

8782.0ST.B100.00

i-RET ANTENNA TBB65 2.0m ALXT-824960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: 0-12/0-12/0-12 LENGTH: 2.0m(66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1.0 25 0.5 >28 >26 16 >11 <0.27 <-153
>18,17,16,16@ 2,5,7,8

824-960 806-894 15.8/13.7 50 <1.5:1 71 9.6 0-12


>18,17,16,16@ 2,5,7,8 >17,15,13@ 0,6,10

2x1710-2170 880-960 16.2/14.1 1710-1880 16.0/13.9 1850-1990 16.1/14 Dual linear 45 50 <1.5:1 67 8.6 65 10 65 9.4 0-12
>17,15,14@ 0,6,10 >17,16,15@ 0,6,10

1920-2170 16.5/14.4

Dual linear 45

63 8.7

>30 >34

>30 <1 25 0.5 >30 >26 15 >9.2 <0.47

>30 <1.5 25 0.5 >27 >25 16 >6.7 <0.52

>30 >34 <2 25 0.5 >28 >27 16 >6.3 <0.66 <-153 <-160 250 500

>30 <4 25 0.5 >30 >27 15 >6.3 <0.66

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 6x AISG Bottom 2033x280x155mm (68x11x6) Pre-mounted standard brackets 23.4 (48) 17.9 (39) 653 42 (93) 55 (123) DC grounded ASA 2175x355x255 (72x14x10) Light Grey 28 (61.7) AISG1.1 (AISG2.0/Ericsson) 7256.00,7454.00A,2210.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.0 / Dec 20 2009

Updated: 2010-06-29

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

435

POWERWAVE

Triple Broadband Antennas

8782.0ST.B100.02

i-RET ANTENNA TBB65 2.0m ALXT-824960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: 0-12/0-12/0-12 LENGTH: 2.0m(66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1.0 25 0.5 >28 >26 16 >11 <0.27 <-153
>18,17,16,16@ 2,5,7,8

824-960 806-894 15.8/13.7 50 <1.5:1 71 9.6 0 - 12


>18,17,16,16@ 2,5,7,8 >17,15,13@ 0,6,10

2x1710-2170 880-960 16.2/14.1 1710-1880 16.0/13.9 1850-1990 16.1/14 Dual linear 45 50 <1.5:1 67 8.6 65 10 65 9.4 0 - 12
>17,15,14@ 0,6,10 >17,16,15@ 0,6,10

1920-2170 16.5/14.4

Dual linear 45

63 8.7

>30 >34

>30 <1 25 0.5 >30 >26 15 >9.2 <0.47

>30 <1.5 25 0.5 >27 >25 16 >6.7 <0.52

>30 >34 <2 25 0.5 >28 >27 16 >6.3 <0.66 <-153 <-160 250 500

>30 <4 25 0.5 >30 >27 15 >6.3 <0.66

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 2x AISG Bottom 2033x280x155mm (68x11x6) Pre-mounted standard brackets 22.4 (49.3) 16.9 (37.2) 653 42 (93) 55 (123) DC grounded ASA 2175x355x255 (72x14x10) Light Grey 27 (59.5) AISG1.1 (AISG2.0/Ericsson) on WHITE system 7256.00,7454.00A,2210.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.0 / Dec 20 2009

Updated: 2010-06-29

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

436

POWERWAVE

Triple Broadband Antennas

8782.0ST.B100.04

i-RET ANTENNA TBB65 2.0m ALXT-824960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: 0-12/0-12/0-12 LENGTH: 2.0m(66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1.0 25 0.5 >28 >26 16 >11 <0.27 <-153
>18,17,16,16@ 2,5,7,8

824-960 806-894 15.8/13.7 50 <1.5:1 71 9.6 0 - 12


>18,17,16,16@ 2,5,7,8 >17,15,13@ 0,6,10

2x1710-2170 880-960 16.2/14.1 1710-1880 16.0/13.9 1850-1990 16.1/14 Dual linear 45 50 <1.5:1 67 8.6 65 10 65 9.4 0 - 12
>17,15,14@ 0,6,10 >17,16,15@ 0,6,10

1920-2170 16.5/14.4

Dual linear 45

63 8.7

>30 >34

>30 <1 25 0.5 >30 >26 15 >9.2 <0.47

>30 <1.5 25 0.5 >27 >25 16 >6.7 <0.52

>30 >34 <2 25 0.5 >28 >27 16 >6.3 <0.66 <-153 <-160 250 500

>30 <4 25 0.5 >30 >27 15 >6.3 <0.66

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 4x AISG Bottom 2033x280x155mm (68x11x6) Pre-mounted standard brackets 22.9 (50.4) 17.4 (38.3) 653 42 (93) 55 (123) DC grounded ASA 2175x355x255 (72x14x10) Light Grey 27.5 (60.6) AISG1.1 (AISG2.0/Ericsson) on RED & WHITE system 7256.00,7454.00A,2210.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.0 / Dec 20 2009

Updated: 2010-06-29

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

437

POWERWAVE

Triple Broadband Antennas

8782.0ST.B400.00

i-RET ANTENNA TBB65 2.0m ALXT-824960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: 0-12/0-12/0-12 LENGTH: 2.0m(66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1.0 25 0.5 >28 >26 16 >11 <0.27 <-153
>18,17,16,16@ 2,5,7,8

824-960 806-894 15.8/13.7 50 <1.5:1 71 9.6 0 - 12


>18,17,16,16@ 2,5,7,8 >17,15,13@ 0,6,10

2x1710-2170 880-960 16.2/14.1 1710-1880 16.0/13.9 1850-1990 16.1/14 Dual linear 45 50 <1.5:1 67 8.6 65 10 65 9.4 0 - 12
>17,15,14@ 0,6,10 >17,16,15@ 0,6,10

1920-2170 16.5/14.4

Dual linear 45

63 8.7

>30 >34

>30 <1 25 0.5 >30 >26 15 >9.2 <0.47

>30 <1.5 25 0.5 >27 >25 16 >6.7 <0.52

>30 >34 <2 25 0.5 >28 >27 16 >6.3 <0.66 <-153 <-160 250 500

>30 <4 25 0.5 >30 >27 15 >6.3 <0.66

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 6x AISG Bottom 2033x280x155mm (68x11x6) Pre-mounted standard brackets 23.4 (48) 17.9 (39) 653 42 (93) 55 (123) DC grounded ASA 2175x355x255 (72x14x10) Light Grey 28 (61.7) AISG2.0 (AISG1.1/Ericsson) 7256.00,7454.00A,2210.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Dec 20 2009

Updated: 2010-06-29

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

438

POWERWAVE

Triple Broadband Antennas

8782.0ST.B400.02

i-RET ANTENNA TBB65 2.0m ALXT-824960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: 0-12/0-12/0-12 LENGTH: 2.0m(66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1.0 25 0.5 >28 >26 16 >11 <0.27 <-153
>18,17,16,16@ 2,5,7,8

824-960 806-894 15.8/13.7 50 <1.5:1 71 9.6 0 - 12


>18,17,16,16@ 2,5,7,8 >17,15,13@ 0,6,10

2x1710-2170 880-960 16.2/14.1 1710-1880 16.0/13.9 1850-1990 16.1/14 Dual linear 45 50 <1.5:1 67 8.6 65 10 65 9.4 0 - 12
>17,15,14@ 0,6,10 >17,16,15@ 0,6,10

1920-2170 16.5/14.4

Dual linear 45

63 8.7

>30 >34

>30 <1 25 0.5 >30 >26 15 >9.2 <0.47

>30 <1.5 25 0.5 >27 >25 16 >6.7 <0.52

>30 >34 <2 25 0.5 >28 >27 16 >6.3 <0.66 <-153 <-160 250 500

>30 <4 25 0.5 >30 >27 15 >6.3 <0.66

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 2x AISG Bottom 2033x280x155mm (68x11x6) Pre-mounted standard brackets 22.4 (49.3) 16.9 (37.2) 653 42 (93) 55 (123) DC grounded ASA 2175x355x255 (72x14x10) Light Grey 27 (59.5) AISG2.0 (AISG1.1/Ericsson) on WHITE system 7256.00,7454.00A,2210.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.0 / Dec 20 2009

Updated: 2010-06-29

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

439

POWERWAVE

Triple Broadband Antennas

8782.0ST.B400.04

i-RET ANTENNA TBB65 2.0m ALXT-824960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4 TILT: 0-12/0-12/0-12 LENGTH: 2.0m(66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <1.0 25 0.5 >28 >26 16 >11 <0.27 <-153
>18,17,16,16@ 2,5,7,8

824-960 806-894 15.8/13.7 50 <1.5:1 71 9.6 0 - 12


>18,17,16,16@ 2,5,7,8 >17,15,13@ 0,6,10

2x1710-2170 880-960 16.2/14.1 1710-1880 16.0/13.9 1850-1990 16.1/14 Dual linear 45 50 <1.5:1 67 8.6 65 10 65 9.4 0 - 12
>17,15,14@ 0,6,10 >17,16,15@ 0,6,10

1920-2170 16.5/14.4

Dual linear 45

63 8.7

>30 >34

>30 <1 25 0.5 >30 >26 15 >9.2 <0.47

>30 <1.5 25 0.5 >27 >25 16 >6.7 <0.52

>30 >34 <2 25 0.5 >28 >27 16 >6.3 <0.66 <-153 <-160 250 500

>30 <4 25 0.5 >30 >27 15 >6.3 <0.66

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 4x AISG Bottom 2033x280x155mm (68x11x6) Pre-mounted standard brackets 22.9 (50.4) 17.4 (38.3) 653 42 (93) 55 (123) DC grounded ASA 2175x355x255 (72x14x10) Light Grey 27.5 (60.6) AISG2.0 (AISG1.1/Ericsson) on RED & WHITE system 7256.00,7454.00A,2210.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.0 / Dec 20 2009

Updated: 2010-06-29

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

440

POWERWAVE

Triple Broadband Antennas

8785.0ST.0000.00

i-RET ANTENNA TBB65 2.6m ALXT-824960/1710-2170-65-17.3i/18i/18i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4 TILT: 0-10/0-10/0-10 LENGTH: 2.6m(86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <2.0 >-24 typical >-17 0.5 >28 >27 16 >12 <0.24 <-153
>17

824-960 806-894 17.4/15.3 50 <1.5:1 65 7 0-10


>17 >17

2x1710-2170 880-960 17.4/15.3 1710-1880 17.2/15.1 1850-1990 17.2/15.1 Dual linear 45 50 <1.5:1 65 7 65 7 65 7 0-10
>17 >17

1920-2170 17.5/15.4

Dual linear 45

62 6

30 38

30 <2.0 >-24 typical >-17 0.5 >28 >27 15 >9.5 <0.44

30 <1.5 >-24 typical >-17 0.5 >30 >27 16 >7.0 <0.47

30 38 <1.5 >-24 typical >-17 0.5 >30 >27 15 >7.5 <0.52 <-153 <-160 250 500

30 <1.5 >-24 typical >-17 0.5 >30 >25 17 >7.7 <0.52

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female Bottom 2658x280x155mm(88x11x6) Pre-mounted heavy duty brackets 26.2(57.7) 20.7(45.6) 880 42(93) 55(123) DC Grounded ASA 2800x355x255(92x12x10) Light Gray 31.5(69.4) No iRET module attached 7256.00, 2210.10, 7454.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.0 / Dec 20 2009

Updated: 2009-07-30

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

441

POWERWAVE

Triple Broadband Antennas

8785.0ST.B100.00

i-RET ANTENNA TBB65 2.6m ALXT-824960/1710-2170-65-17.3i/18i/18i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4 TILT: 0-10/0-10/0-10 LENGTH: 2.6m(86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <2.0 >-24 typical >-17 0.5 >28 >27 16 >12 <0.24 <-153
>17

824-960 806-894 17.4/15.3 50 <1.5:1 65 7 0-10


>17 >17

2x1710-2170 880-960 17.4/15.3 1710-1880 17.2/15.1 1850-1990 17.2/15.1 Dual linear 45 50 <1.5:1 65 7 65 7 65 7 0-10
>17 >17

1920-2170 17.5/15.4

Dual linear 45

62 6

30 38

30 <2.0 >-24 typical >-17 0.5 >28 >27 15 >9.5 <0.44

30 <1.5 >-24 typical >-17 0.5 >30 >27 16 >7.0 <0.47

30 38 <1.5 >-24 typical >-17 0.5 >30 >27 15 >7.5 <0.52 <-153 <-160 250 500

30 <1.5 >-24 typical >-17 0.5 >30 >25 17 >7.7 <0.52

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 6x AISG Bottom 2658x280x155mm(88x11x6) Pre-mounted heavy duty brackets 27.7(61) 22.2(49) 880 42(93) 55(123) DC Grounded ASA 2800x355x255(92x12x10) Light Gray 33(72.7) AISG1.1 (AISG2.0/Ericsson) 7256.00, 2210.10, 7454.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Dec 20 2009

Updated: 2009-07-30

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

442

POWERWAVE

Triple Broadband Antennas

8785.0ST.B100.02

i-RET ANTENNA TBB65 2.6m ALXT-824960/1710-2170-65-17.3i/18i/18i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4 TILT: 0-10/0-10/0-10 LENGTH: 2.6m(86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <2.0 >-24 typical >-17 0.5 >28 >27 16 >12 <0.24 <-153
>17

824-960 806-894 17.4/15.3 50 <1.5:1 65 7 0 - 10


>17 >17

2x1710-2170 880-960 17.4/15.3 1710-1880 17.2/15.1 1850-1990 17.2/15.1 Dual linear 45 50 <1.5:1 65 7 65 7 65 7 0 - 10
>17 >17

1920-2170 17.5/15.4

Dual linear 45

62 6

30 38

30 <2.0 >-24 typical >-17 0.5 >28 >27 15 >9.5 <0.44

30 <1.5 >-24 typical >-17 0.5 >30 >27 16 >7.0 <0.47

30 38 <1.5 >-24 typical >-17 0.5 >30 >27 15 >7.5 <0.52 <-153 <-160 250 500

30 <1.5 >-24 typical >-17 0.5 >30 >25 17 >7.7 <0.52

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 2x AISG Bottom 2658x280x155mm(88x11x6) Pre-mounted heavy duty brackets 26.7(58.8) 21.2(46.7) 880 42(93) 55(123) DC Grounded ASA 2800x355x255(92x12x10) Light Gray 32(70.5) AISG1.1 (AISG2.0/Ericsson) on WHITE system 7256.00, 2210.10, 7454.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.0 / Dec 20 2009

Updated: 2009-07-30

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

443

POWERWAVE

Triple Broadband Antennas

8785.0ST.B100.04

i-RET ANTENNA TBB65 2.6m ALXT-824960/1710-2170-65-17.3i/18i/18i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4 TILT: 0-10/0-10/0-10 LENGTH: 2.6m(86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <2.0 >-24 typical >-17 0.5 >28 >27 16 >12 <0.24 <-153
>17

824-960 806-894 17.4/15.3 50 <1.5:1 65 7 0 - 10


>17 >17

2x1710-2170 880-960 17.4/15.3 1710-1880 17.2/15.1 1850-1990 17.2/15.1 Dual linear 45 50 <1.5:1 65 7 65 7 65 7 0 - 10
>17 >17

1920-2170 17.5/15.4

Dual linear 45

62 6

30 38

30 <2.0 >-24 typical >-17 0.5 >28 >27 15 >9.5 <0.44

30 <1.5 >-24 typical >-17 0.5 >30 >27 16 >7.0 <0.47

30 38 <1.5 >-24 typical >-17 0.5 >30 >27 15 >7.5 <0.52 <-153 <-160 250 500

30 <1.5 >-24 typical >-17 0.5 >30 >25 17 >7.7 <0.52

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 4x AISG Bottom 2658x280x155mm(88x11x6) Pre-mounted heavy duty brackets 27.2(59.9) 21.7(47.8) 880 42(93) 55(123) DC Grounded ASA 2800x355x255(92x12x10) Light Gray 32.5(71.7) AISG1.1 (AISG2.0/Ericsson) on RED & WHITE system 7256.00, 2210.10, 7454.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-08-04

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

444

POWERWAVE

Triple Broadband Antennas

8785.0ST.B400.00

i-RET ANTENNA TBB65 2.6m ALXT-824960/1710-2170-65-17.3i/18i/18i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4 TILT: 0-10/0-10/0-10 LENGTH: 2.6m(86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <2.0 >-24 typical >-17 0.5 >28 >27 16 >12 <0.24 <-153
>17

824-960 806-894 17.4/15.3 50 <1.5:1 65 7 0 - 10


>17 >17

2x1710-2170 880-960 17.4/15.3 1710-1880 17.2/15.1 1850-1990 17.2/15.1 Dual linear 45 50 <1.5:1 65 7 65 7 65 7 0 - 10
>17 >17

1920-2170 17.5/15.4

Dual linear 45

62 6

30 38

30 <2.0 >-24 typical >-17 0.5 >28 >27 15 >9.5 <0.44

30 <1.5 >-24 typical >-17 0.5 >30 >27 16 >7.0 <0.47

30 38 <1.5 >-24 typical >-17 0.5 >30 >27 15 >7.5 <0.52 <-153 <-160 250 500

30 <1.5 >-24 typical >-17 0.5 >30 >25 17 >7.7 <0.52

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 6x AISG Bottom 2658x280x155mm(88x11x6) Pre-mounted heavy duty brackets 27.7(61) 22.2(49) 880 42(93) 55(123) DC Grounded ASA 2800x355x255(92x12x10) Light Gray 33(72.7) AISG2.0 (AISG1.1/Ericsson) 7256.00, 2210.10, 7454.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Dec 20 2009

Updated: 2009-07-30

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

445

POWERWAVE

Triple Broadband Antennas

8785.0ST.B400.02

i-RET ANTENNA TBB65 2.6m ALXT-824960/1710-2170-65-17.3i/18i/18i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4 TILT: 0-10/0-10/0-10 LENGTH: 2.6m(86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <2.0 >-24 typical >-17 0.5 >28 >27 16 >12 <0.24 <-153
>17

824-960 806-894 17.4/15.3 50 <1.5:1 65 7 0 - 10


>17 >17

2x1710-2170 880-960 17.4/15.3 1710-1880 17.2/15.1 1850-1990 17.2/15.1 Dual linear 45 50 <1.5:1 65 7 65 7 65 7 0 - 10
>17 >17

1920-2170 17.5/15.4

Dual linear 45

62 6

30 38

30 <2.0 >-24 typical >-17 0.5 >28 >27 15 >9.5 <0.44

30 <1.5 >-24 typical >-17 0.5 >30 >27 16 >7.0 <0.47

30 38 <1.5 >-24 typical >-17 0.5 >30 >27 15 >7.5 <0.52 <-153 <-160 250 500

30 <1.5 >-24 typical >-17 0.5 >30 >25 17 >7.7 <0.52

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 2x AISG Bottom 2658x280x155mm(88x11x6) Pre-mounted heavy duty brackets 26.7(58.8) 21.2(46.7) 880 42(93) 55(123) DC Grounded ASA 2800x355x255(92x12x10) Light Gray 32(70.5) AISG2.0 (AISG1.1/Ericsson) on WHITE system 7256.00, 2210.10, 7454.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.0 / Dec 20 2009

Updated: 2009-07-30

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

446

POWERWAVE

Triple Broadband Antennas

8785.0ST.B400.04

i-RET ANTENNA TBB65 2.6m ALXT-824960/1710-2170-65-17.3i/18i/18i-Ai-D

POLARIZATION: XXX-Pol FREQUENCY (MHz): 824-960, 2x1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4 TILT: 0-10/0-10/0-10 LENGTH: 2.6m(86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 300 600 <2.0 >-24 typical >-17 0.5 >28 >27 16 >12 <0.24 <-153
>17

824-960 806-894 17.4/15.3 50 <1.5:1 65 7 0 - 10


>17 >17

2x1710-2170 880-960 17.4/15.3 1710-1880 17.2/15.1 1850-1990 17.2/15.1 Dual linear 45 50 <1.5:1 65 7 65 7 65 7 0 - 10
>17 >17

1920-2170 17.5/15.4

Dual linear 45

62 6

30 38

30 <2.0 >-24 typical >-17 0.5 >28 >27 15 >9.5 <0.44

30 <1.5 >-24 typical >-17 0.5 >30 >27 16 >7.0 <0.47

30 38 <1.5 >-24 typical >-17 0.5 >30 >27 15 >7.5 <0.52 <-153 <-160 250 500

30 <1.5 >-24 typical >-17 0.5 >30 >25 17 >7.7 <0.52

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

6x 7/16 DIN Female 4x AISG Bottom 2658x280x155mm(88x11x6) Pre-mounted heavy duty brackets 27.2(59.9) 21.7(47.8) 880 42(93) 55(123) DC Grounded ASA 2800x355x255(92x12x10) Light Gray 32.5(71.7) AISG2.0 (AISG1.1/Ericsson) on RED & WHITE system 7256.00, 2210.10, 7454.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.0 / Dec 20 2009

Updated: 2009-07-30

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

447

iRET Antennas

POWERWAVE

High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz

iRET Antennas
Cross Polarized High Broadband Cross Polarized Antennas, 1710-2170 MHz

Horizontal Beamwidth 65 65 65

Gain dBi dBd 15.6/13.5 18.3/16.2 19.5/17.4

Tilt 0-16 0-10 0-6

Length 0.7m(23) 1.3m(43) 2.0m(66)

Part Number 8720.0ST.B400.00 8721.0ST.B400.00 8722.0ST.B400.00

Page 449 450 451

448

POWERWAVE

High Broadband Antennas

8720.0ST.B400.00

i-RET ANTENNA HBB65 0.7m UXM-17102170-65-15i-Ai-D AISGv2.0

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15.6/13.5 TILT: 0-16 LENGTH: 0.7m(23)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 250 500 <-153 <-153 <-160 >17,16,16,15,15@0,4,8,12,16 >30 <1.5 >-29, typical >-25 0.5 >30 >25 >15 >15 67 14.1 1710-1880 15/12.9 1710-2170 1850-1990 15.1/13 Dual Linear 45 50 <1.4:1 65 13.5 0-16 >17,16,16,15,15@0,4,8,12,16 >30 <1.5 >-29, typical >-25 0.5 >30 >25 >15 >15 >17,16,16,15,15@0,4,8,12,16 >30 <1.5 >-29, typical >-25 0.5 >30 >25 >15 >13 64 12.5 1920-2170 15.6/13.5

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2x 7/16 DIN Female 2xAISG [1x i-RET 8510.40] Bottom 709x167x89.5 (23x6x3) Pre-mounted standard brackets 8.2 (18) 4.5 (9.9) 133 / 31 / 155 42 (93) 70 (156) DC Grounded -40C to +60C ASA Light Grey 880x200x200 (211x8x8) 11.5 (25.3) AISG2.0 (AISG1.1/Ericsson) 7456.00A,2201.11,7454.00A,7455.00,7458.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.02 / Feb 19 2010

Updated: 2010-04-02

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

449

POWERWAVE

High Broadband Antennas

8721.0ST.B400.00

i-RET ANTENNA HBB65 1.3m UXM-17102170-65-18i-Ai-D AISGv2.0

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.3/16.2 TILT: 0-10 LENGTH: 1.3m(43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 250 500 <-153 <-153 <-160 >18,18,16,16,14,12 @ 0,2,4,6,8,10 >30 <1.0 >-24 typical >-17 0.5 >30 >27 >17 >18 67 7.0 1710-1880 17.6/15.5 1710-2170 1850-1990 18.0/15.9 Dual linear 45 50 <1.4:1 66 6.6 0-10 >18,18,16,16,14,12 @ 0,2,4,6,8,10 >30 <1.0 >-24 typical >-17 0.5 >30 >27 >17 >14 >18,18,16,16,14,12 @ 0,2,4,6,8,10 >30 <1.0 >-24 typical >-17 0.5 >30 >27 >20 >12 64 6.3 1920-2170 18.3/16.2

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2x 7/16 DIN Female 2xAISG [1x i-RET 8510.40] Bottom 1309x167x89.5 mm (43x6x3) Pre-mounted standard brackets 11(24) 7.3(16) 285 / 60 / 333 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1480x200x200mm (410x8x8) 14.7 (32.4) AISG2.0 (AISG1.1/Ericsson) 7456.00A,2201.11,7454.00A,7455.00,7458.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.03 / Feb 19 2010

Updated: 2010-04-02

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

450

POWERWAVE

High Broadband Antennas

8722.0ST.B400.00

i-RET ANTENNA HBB65 1.9m UXM-17102170-65-19.5i-Ai-D AISGv2.0

POLARIZATION: X-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 19.5/17.4 TILT: 0-6 LENGTH: 2.0m(66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 250 500 <-153 <-153 <-160 >30 <1.0 >-20, typical >-16 0.4 >30 >27 >19 >20 67 4.7 1710-1880 19.0/16.9 1710-2170 1850-1990 19.2/17.1 Dual Linear 45 50 <1.4:1 66 4.4 0-6 >18,18,18,16,16,14,14@0,1,2,3,4,5,6 >18,18,18,16,16,14,14@0,1,2,3,4,5,6 >18,18,18,16,16,14,14@0,1,2,3,4,5,6 >30 <1.0 >-20, typical >-16 0.4 >30 >27 >19 >17 >30 <1.0 >-20, typical >-16 0.4 >30 >27 >21 >12 65 4.2 1920-2170 19.5/17.4

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2x 7/16 DIN Female 2xAISG [1x i-RET 8510.40] Bottom 1934 x 167 x 89.5 (64 x 6 x 3) Pre-mounted standard brackets 14 (31) 8.5 (18.7) 423 / 90 / 494 42 (93) 55 (123) DC Grounded -40C to +60C ASA Light Grey 2105 x 200 x 200 (611 x 8 x 8) 15.5 (34.1) AISG2.0 (AISG1.1/Ericsson) 7456.00A,2201.11,7454.00A,7455.00,7458.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.02 / Feb 19 2010

Updated: 2010-04-02

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

451

iRET Antennas

POWERWAVE

High Broadband Cross Polarized iRET 2300-2700MHz

iRET Antennas
Cross Polarized High Broadband Cross Polarized iRET 2300-2700MHz

Horizontal Beamwidth 65 90

Gain dBi dBd 18.0/15.9 16.5/14.4

Tilt 0-10 0-10

Length 1.2m(48) 1.2m(48)

Part Number P65-18-XW2-R P90-17-XW2-R

Page 453 454

452

POWERWAVE

High Broadband Antennas

P65-18-XW2-R

i-RET ANTENNA VHBB65 1.2m WXM-23002690-65-18i-Ai-D

POLARIZATION: X-Pol FREQUENCY (MHz): 2300-2690** HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.0/15.9 TILT: 0-10 LENGTH: 1.2m(48)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 2300-2690** 2300-2690 18.0/15.9 Dual Linear 45 50 <1.5:1 65 5.5 0-10 <18,16,15 @ 0,5,10 >30 n.a. <2.0 >-24 Typical >-18 0.5 >27 >25 >15 >10 n.a. <-153 250 500

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2x7/16 DIN Female 2xAISG [1x i-RET 8510.40] Bottom 1219x167x89.5 (48x6.5x3.5) Pre-mounted standard brackets [7456.00A] 10.0 (21) 6.0 (13) 262 / 66 / 303 42 (93) 55 (123) DC Grounded -40C to +60C ASA Light Grey 1480x200x200 (58x8x8) 12.0 (27.0) 7456.00A, 7455.00, 7458.00A,

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-11-29

453

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

High Broadband Antennas

P90-17-XW2-R

High Broadband Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 2300-2690** HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.5 (14.4) TILT: 0-10 LENGTH: 1.2m (48)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) >-153 250 500 <1 >-24 typical >-16 <1.0 >30 >28 >15 >7 2300-2690** 2300-2690 16.5 (14.4) Dual Linear 45 50 1.4:1 90 5.5 0-10 15 >30

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1219 x 167 x 100 (48 x 6 x 3.9) Pre-mounted standard brackets 10 (21) 6 (13) 281 42 (93) 55 (123) DC Ground -40C to +60C ASA Light Grey 1480 x 200 x 200 (58 x 8 x 8) 12 (27) 7456.00A, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-12-05

454

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

iRET Antennas

POWERWAVE

Dual High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz

iRET Antennas
Cross Polarized Dual High Broadband Cross Polarized Antennas, 1710-2170 MHz

Horizontal Beamwidth 65 65

Gain dBi dBd 18.1/16.0 18.1/16.0

Tilt 0-10 0-10

Length 1.3m(43) 1.3m(43)

Part Number 8760.0ST.B100.00 8760.0ST.B400.00

Page 456 457

455

POWERWAVE

Dual High Broadband Antennas

8760.0ST.B100.00

i-RET ANTENNA DHBB65 1.3m UXCM1710-2170-65-18i/18i-Ai-D AISGv1.1

POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0 TILT: 0-10 LENGTH: 1.3m(43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <-153 <-160 <-153 <-160 250 1000 <-153 <-160 >22,20,18,16,14,14@0,2,4,6,8, 10 >30 <2.0 >-24,typical>-18 <2.0 >28 >28 >16 >16 67 7.1 1710-1880 17.7/15.6 1710-2170 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 65 6.8 0-10 >22,20,18,16,14,14@0,2,4,6,8, 10 >30 <2.0 >-24,typical>-18 <2.0 >28 >28 >16 >13 >22,20,18,16,14,14@0,2,4,6,8, 10 >30 <2.0 >-24,typical>-18 <2.0 >28 >28 >20 >10 64 6.2 1920-2170 18.1/16.0

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4x 7/16 DIN Female 4xAISG [2x i-RET 8510.40] Bottom 1320x343x100 (44x11x3) Pre-mounted heavy duty brackets 19.5 (42.9) 14 (30.8) 529 / 63 / 615 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1430x400x200 (48x13x7) 23.5 (51.8) AISG1.1 (AISG2.0/Ericsson) 7256.00, 7454.00A, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.02 / Feb 19 2010

Updated: 2010-04-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

456

POWERWAVE

Dual High Broadband Antennas

8760.0ST.B400.00

i-RET ANTENNA DHBB65 1.3m UXCM1710-2170-65-18i/18i-Ai-D AISGv2.0

POLARIZATION: XX-Pol FREQUENCY (MHz): 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0 TILT: 0-10 LENGTH: 1.3m(43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W)
Daisy chain cable included

1710-2170 1710-1880 17.7/15.6 1850-1990 17.9/15.8 Dual linear 45 50 <1.4:1 67 7.1 >22,20,18,16,14,14@0,2,4,6,8, 10 >30 <2.0 >-24,typical>-18 <2.0 >28 >28 >16 >16 <-153 <-160 65 6.8 0-10 >22,20,18,16,14,14@0,2,4,6,8, 10 >30 <2.0 >-24,typical>-18 <2.0 >28 >28 >16 >13 <-153 <-160 250 1000 >22,20,18,16,14,14@0,2,4,6,8, 10 >30 <2.0 >-24,typical>-18 <2.0 >28 >28 >20 >10 <-153 <-160 64 6.2 1920-2170 18.1/16.0

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4x 7/16 DIN Female 4xAISG [2x i-RET 8510.40] Bottom 1320x343x100 (44x11x3) Pre-mounted heavy duty brackets 19.5 (42.9) 14 (30.8) 529 / 63 / 615 42 (93) 55 (123) DC grounded -40C to +60C ASA Light Grey 1430x400x200 (48x13x7) 23.5 (51.8) AISG2.0 (AISG1.1/Ericsson) 7256.00, 7454.00A, 2210.10

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.02 / Feb 19 2010

Updated: 2010-04-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

457

iRET Antennas

POWERWAVE

Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700 MHz

iRET Antennas
Cross Polarized Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700 MHz

Horizontal Beamwidth 65

Gain dBi dBd 18.0/15.9, 18.0/15.9

Tilt 0-10/0-10

Length 0.7m(23)

Part Number P65-18-XHW2-RR

Page 459

458

POWERWAVE

Dual High Broadband Antennas

P65-18-XHW2-RR

i-RET ANTENNA DBB65 1.3m 17102170/2500-2690-65-18i/18i-D

POLARIZATION: XX-Pol FREQUENCY (MHz): 2500-2690, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.0/15.9, 18.0/15.9 TILT: 0-10/0-10 LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 2500-2690 2500-2690 18.0/15.9 Dual linear 45 50 <1.4:1 65 5.7 0 - 10 >20,18,15 @ 0,5,10 >30 >35 <2 >-24 typical >-17 0.5 >27 >26 >15 >10 <-153 250 500 <2 >-20 typical >-17 0.5 >30 >27 >17 >18 65 7.0 1710-1880 17.6/15.5 1710-2170 1850-1990 17.8/15.7 Dual linear 45 50 <1.4:1 65 6.6 0 - 10 >20,20,20,20,18,18 @ >20,20,20,20,18,18 @ >20,20,20,20,18,18 @ 0,2,4,6,8,10 0,2,4,6,8,10 0,2,4,6,8,10 >30 >30 >30 >35 <2 >-20 typical >-17 0.5 >30 >27 >17 >14 <-153 <-160 250 500 <2 >-20 typical >-17 0.5 >30 >27 >17 >10 65 6.3 1900-2170 18.0/15.9

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4x 7/16 DIN Female 4xAISG [2x i-RET 8510.40] Bottom 1320x343x100 (52x13.5x4) Pre-mounted heavy duty brackets 19.5 (42.9) 14.0 (30.8) 529/63/615 42 (93) 55 (123) DC grounded -40C to +60C PVC 1430x400x200 (56x16x8) Light Grey 23.5 (51.8) 2xiRET 8510.40 AISGv2.0/3GPP 7256.00, 7454.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visithttp://www.powerwave.com/rpa/.

Updated: 2010-12-15

459

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

iRET Antennas

POWERWAVE

Dual High Broadband Cross Polarized iRET 2300-2700MHz

iRET Antennas
Cross Polarized Dual High Broadband Cross Polarized iRET 2300-2700MHz

Horizontal Beamwidth 65 90

Gain dBi dBd 18.0/15.9 16.1

Tilt 0-10 0-10

Length 1.2m(48) 1.2m(48)

Part Number P65-18-XXW2-R P90-17-XXW2-R

Page 461 462

460

POWERWAVE

Dual High Broadband Antennas

P65-18-XXW2-R

i-RET ANTENNA DVHBB65 1.2m WXCM2300-2690-65-18i/18i-Ai-D

POLARIZATION: XX-Pol FREQUENCY (MHz): 2300-2690** HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 18.0/15.9 TILT: 0-10 LENGTH: 1.2m(48)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 2300-2690** 2300-2690 18.0/15.9 2 x Dual Linear 45 50 <1.5:1 65 5.5 0-10 <18,16,15 @ 0,5,10 >30 n.a. <2.0 >-24, typical >-18 0.5 >27 >25 >15 >10 n.a. <-153 250 1000

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4x7/16 DIN Female 2xAISG [1x i-RET 8510.40] Bottom 1209x343x89 (4x11x3) Pre-mounted heavy duty brackets [7456.00] 17.0 (38.0) 12.0 (26.0) 476 / 58 / 538 42(93) 70(156) DC Grounded -40C to +60C ASA Light Grey 1430x400x200 (56x16x8) 20.6(45) 7256.00, 7454.00A, 7458.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-12-05

461

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Dual High Broadband Antennas

P90-17-XXW2-R

Dual High Broadband Cross Polarized

POLARIZATION: XXPol FREQUENCY (MHz): 2496-2690 HORIZONTAL BEAM WIDTH (): 90 GAIN (dBi/dBd): 16.1 (Average) TILT: 0-10 LENGTH: 1.2M (48)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) 2496-2690 2496-2690 16.1 (Average) 2 x Dual linear 45 50 <1.5:1 90 +/- 6 5.5 0-10 12 @ 0, 17 @ 5, 15 @ 10 >30 N/A <3.0 >-24,typical>-18 <1.0 +/- .5 >30 @ 180 >25 @ +/-30 cone >15 >10 N/A <-153 250 1000

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4 x 7/16 DIN Female Bottom 1219 x 343 x 100 (48 x 13.5 x 3.9) Pre-mounted heavy duty brackets 19.5 (44) 14.2 (32) 520 42 (93) 55 (123) DC Grounded -30 to +70C ASA Light Grey 1430 x 400 x 200 (48 x 13 x 8) 20 (45) 7456.00A, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-11-24

462

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

iDiplexer Antennas

Power wave

iDiplexer antennas combine the performance of Powerwaves high performing multiband antenna line and external diplexer into one product. iDiplexed antennas offer a reduced amount of connectors and feeder lines to customers who are limited in adding additional feeders due to windload and space limitation on towers. Customers can rapidly deploy an additional overlay network by just exchanging the existing antennas with iDiplexed antennas and reusing the existing feeders. iDiplexed antennas usually combine the low band and high band frequencies into a single pair of connectors, still keeping the independent variable downtilt capability.

iDiplexer Antennas

POWERWAVE

iDiplexer Antennas

iDiplexer Antennas
Cross Polarized Multi Broadband Cross Polarized Antennas

Horizontal Beamwidth 65 65 65 65 65 65

Gain dBi dBd 17.4/15.3, 17.6/15.5, 17.4/15.3 16.0/13.9, 15.9/13.8, 15.8/13.7 14.5/12.4, 14.6/12.5, 14.4/12.3 17.3/15.2, 17.8/15.7 16.7/14.6, 17.4/15.3 15/12.9, 18/15.9

Tilt 2-8/2-10/2-10 2-10/2-12/2-12 2-12/2-14/2-14

Length 2.6m (86) 2.0m (66) 1.4m (47)

Part Number P65-18-XDHW2-ND1 P65-17-XDHW2-ND1 P65-15-XDHW2-ND1 7755.OST.0002.00 7752.OST.0002.00 7750.OST.0002.00

Page 465 466 467 468 469 470

MET (with Integrated 2.6m (86) Diplexer) MET (with Integrated 2.0m (66) Diplexer) MET (with Integrated 1.4m (47) Diplexer)

464

POWERWAVE

iDiplexer Antennas

P65-18-XDHW2ND1

Triple Broadband Cross Polarized 790960MHz,1710-2170MHz, 2500-2690MHz integrated diplexer LB/HB

POLARIZATION: XXX-Pol FREQUENCY (MHz): 790-960, 1710-2170, 2500 -2690 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.4/15.3, 17.6/15.5, 17.4/15.3 TILT: 2-8/2-10/2-10 LENGTH: 2.6m(86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <2.0 >-24 typical >-17 0.8 >28 >27 >13 <-153 200 400
>15

790-960 790-894 16.2/14.1 50 <1.5:1 72 7.5 2-8


>15 >15

1710-2170; 2500-2690 880-960 17.4/15.3 1710-1880 17.2/15.1 1900-2170 17.6/15.5 Dual linear 45 50 <1.5:1 67 6.9 63 6.9 60 6.2 2 - 10
>15 >15

2500-2690 17.4/15.3

Dual linear 45

62 5.0

>30 >30

>30 <2.0 >-24 typical >-17 0.8 >28 >27 >13 -

>30 <1.5 >-24 typical >-17 0.5 >30 >27 >13 -

>30 >30 <1.5 >-24 typical >-17 0.5 >30 >27 >13 <-153 <-160 200 400

>30 <1.5 >-24 typical >-17 0.5 >30 >27 >13 -

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4x 7/16 DIN Female Bottom 2705x282x155mm(810x11x6) Pre-mounted heavy duty brackets 28(61.6) 22.5(49.5) 880 42(93) 55(123) DC Grounded -40C to +60C ASA 2847x355x255(94x12x10) Light Gray 33.3(73.3) 8210.40, 8210.10, 8230.40, 8230.10 7256.00, 7454.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-12-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

465

POWERWAVE

iDiplexer Antennas

P65-17-XDHW2ND1

Triple Broadband Cross Polarized 790960MHz, 1710-2170MHz, 2500-2690MHz integrated diplexer LB/HB

POLARIZATION: XXX-Pol FREQUENCY (MHz): 790-960, 1710-2170, 2500 -2690 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.0/13.9, 15.9/13.8, 15.8/13.7 TILT: 2-10/2-12/2-12 LENGTH: 2.0m(66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 >-24 typical >-17 0.5 >28 >26 >13 <-153 200 400
>15

790-960 790-894 15.6/13.5 50 <1.5:1 78 11.0 2 - 10


>15 >15

1710-2170; 2500-2690 880-960 16.0/13.9 1710-1880 15.8/13.7 1900-2170 15.9/13.8 Dual linear 45 50 <1.5:1 67 8.6 66 10.0 63 8.7 2 - 12
>15 >15

2500-2690 15.8/13.7

Dual linear 45

66 7.9

>30 >30

>30 <1 >-24 typical >-17 0.5 >30 >26 >13 -

>30 <1.5 >-24 typical >-17 0.5 >27 >25 >13 -

>30 >30 <2 >-24 typical >-17 0.5 >27 >25 >13 <-153 <-160 200 400

>30 <4 >-24 typical >-17 0.5 >27 >25 >13 -

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4x 7/16 DIN Female Bottom 2033x280x155mm (68x11x6) Pre-mounted standard brackets 21.9 (48.2) 16.4 (36.1) 653 42 (93) 55 (123) DC grounded -40C to +60C PVC 2175x355x255 (72x14x10) Light Grey 26.5 (58.4) 8210.40, 8210.10, 8230.40, 8230.10 7256.00,7454.00A,2210.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-12-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

466

POWERWAVE

iDiplexer Antennas

P65-15-XDHW2ND1

Triple Broadband Cross Polarized 790960MHz,1710-2170MHz, 2500-2690MHz integrated diplexer LB/HB

POLARIZATION: XXX-Pol FREQUENCY (MHz): 790-960, 1710-2170, 2500 -2690 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 14.5/12.4, 14.6/12.5, 14.4/12.3 TILT: 2-12/2-14/2-14 LENGTH: 1.4m(47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1 >-24 typical >-17 0.7 >27 >24 >13 <-153 200 400
>15

790-960 790-894 13.2/11.1 50 <1.5:1 78 18.0 2 - 12


>15 >15

1710-2170; 2500-2690 880-960 14.5/12.4 1710-1880 14.2/12.1 1900-2170 14.6/12.5 Dual linear 45 50 <1.5:1 67 13.9 66 13.8 63 12.4 2 - 14
>15 >15

2500-2690 14.4/12.3

Dual linear 45

66 11.0

>30 >30

>30 <2 >-24 typical >-17 0.7 >28 >24 >13 -

>30 <1.5 >-24 typical >-17 0.7 >28 >24 >13 -

>30 >30 <1.2 >-24 typical >-17 1 >28 >24 >13 <-153 <-160 200 400

>30 <4 >-24 typical >-17 1 >28 >24 >13 -

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

4x 7/16 DIN Female Bottom 1408x280x155mm (47x11x6) Pre-mounted heavy duty brackets 19 (42) 13.5 (30) 415 42 (93) 55 (123) DC grounded -40C to +60C PVC 1550x355x200 (51x12x7) Light Grey 23 (50.7) 8210.40, 8210.10, 8230.40, 8230.10 7256.00, 2210.10, 7454.00A

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-12-09

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

467

POWERWAVE

iDiplexer Antennas

7755.0ST.0002.00

Dual Broadband Cross Polarized With Integrated Diplexer

POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 17.3/15.2, 17.8/15.7 TILT: MET (with Integrated Diplexer) LENGTH: 2.6m (86)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 >-25 0.5 >30 >25 16 >11 <0.3 <-150 300 600
>18,18,17,16,16@ 2,4,6,8

824-960 824-896 16.6/14.5 50 1.5:1 71 7.4 2 to 8


>18,18,17,16,16@ 2,4,6,8 >17,16,15,14,13@ 2,4,6,8

1710-2170 880-960 17.3/15.2 1710-1880 17.3/15.2 1850-1990 17.6/15.5 Dual linear 45 50 1:5:1 67 7.0 65 6.9 65 6.4 0 to 8
>17,17,16,15,14@ 2,4,6,8 >17,17,16,15,14@ 2,4,6,8

1900-2170 17.8/15.7

Dual linear 45

62 6.1

30 38

30 <1.0 >-25 0.5 >30 >25 14 > 9.5 <0.41

30 <1.5 >-25 0.5 >30 >25 16 > 6.3 <0.53

30 <1 >-25 0.5 >30 >25 16 >7.2 <0.58 <-150 <-160 250 500

30 <3.5 >-25 0.5 >30 >25 16 >7.5 <0.58

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2658x280x125mm (88x11x4) Pre-mounted heavy duty brackets 25.1 (55) 19.6 (43) 880 42 (93) 55 (123) DC grounded -40C to +60C GRP Light Grey 2800x355x255 (92x12x10) 32.5 (71.6) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Packet size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-12-02

468

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

iDiplexer Antennas

7752.0ST.0002.00

Dual Broadband Cross Polarized With Integrated Diplexer

POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 16.7/14.6, 17.4/15.3 TILT: MET (with Integrated Diplexer) LENGTH: 2.0m (66)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 >-25 <1 >30 >25 >16 > 12 <0.26 <-153 300 600
>17,16,15,14 @ 2,4,6,8

824-960 824-896 15.7/14.0 50 1.5:1 71 9.6 2-9


>17,16,15,14 @ 2,4,6,8 >18,17,15,14 @ 0,2,4,8

1710-2170 880-960 16.6/14.5 1710-1880 17.0/14.9 1850-1990 17.2/15.1 Dual linear 45 50 1.5:1 67 8.9 63 7 63 7 0-8
>18,17,15,14 @ 0,2,4,8 0,2,4,8 >18,17,15,14 @ 0,2,4,8 0,2,4,8

1920-2170 17.5/15.4

Dual linear 45

60 6.2

>30 -

>30 <1.0 >-25 <1 >30 >25 >15 > 9.5 <0.39

>30 <1.5 >-25 <1 >30 >25 >16 > 6.2 <0.5

>30 <1.5 >-25 <1 >30 >25 >16 >6.5 <0.59 <-153 <-160 250 500

>30 <1.5 >-25 <1 >30 >25 >16 > 7.5 <0.59

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 2033x280x125mm (68x11x4) Pre-mounted heavy duty bracket 19.8 (44) 16.0 (35) 653 42 (93) 70 (156) DC grounded -40C to +60C GRP 2175x355x255 (72x14x10) Grey (RAL 7035 on all visible plastic parts) 27 (59.5) 8210.40, 8210.10, 8220.40, 8220.10 7256.00, 7454.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-12-02

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

469

POWERWAVE

iDiplexer Antennas

7750.0ST.0002.00

Dual Broadband Cross Polarized With Integrated Diplexer

POLARIZATION: XX-Pol FREQUENCY (MHz): 824-960, 1710-2170 HORIZONTAL BEAM WIDTH (): 65 GAIN (dBi/dBd): 15/12.9, 18/15.9 TILT: MET (with Integrated Diplexer) LENGTH: 1.4M

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Side lobe suppression, vertical 1st upper (dB) Isolation between inputs (dB) Inter band Isolation (dB) Tracking, horizontal plane 60 (dB) First null fill (dB) Vertical beam squint () Front to back ratio (dB) 18030 copolar Front to back ratio (dB) 18030 total power Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) Far field coupling IM3, 2xTx@43dBm (dBc) IM7, 2xTx@43dBm (dBc) Power handling, average per input (W) Power handling, average total (W) <1.0 >20 <1 >26 >26 >17 >11 <-153 NA 300 600
>21,20,17,16 @ 2,4,8,12

824-960 824-880 15/12.9 50 >1.5:1 68 3 14 2 - 12


>21,20,17,16 @ 2,4,8,12 >18,17,15,14 @ 0,2,4,8

1710-2170 880-960 15/12.9 1710-1880 17.3/15.2 1850-1990 17.3/15.2 Dual linear 45 50 >1.5:1 68 3 14 67 2 7 67 2 7 0-8
>18,17,15,14 @ 0,2,4,8 >18,17,15,14 @ 0,2,4,8

1920-2170 18/15.9

Dual linear 45

62 4 6.2

>30 40

>30 <1.0 >20 <1 >26 >26 >17 >11 -

>30 <1.5 >20 <1 >30 >25 >18 >10 -

>30 <1.5 >20 <1 >30 >25 >18 >10 <-153 <-160 250 500

>30 <1.5 >20 <1 >30 >25 >18 >10 -

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, with brackets, kg (lbs) Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)

2 x 7/16 DIN Female Bottom 1408x280x125mm (49x11x5) Pre Mounted Standard Brackets 18 (39.6) 14.3 (31.5) 435 42 (93) 55 (123) DC Grounded -40C to +60C GRP 1550x355x255mm (61x14x10) Grey (RAL 7035 on all visible plastic parts) 23 (50.6) 8210.40, 8210.10, 8220.40, 8220.10 7456.00A, 7454.00, 7455.00, 7458.00

Maximum operational wind speed, m/s (mph) Survival wind speed, m/s (mph) Lightning protection Operating Temperature Radome material Package size, HxWxD, mm (ft) Radome colour Shipping weight, kg (lbs) RET Brackets

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: 2010-12-02

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

470

Remote Electrical Tilt (RET)

Power wave

The Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment. The system consists of a master control unit (MCU) that controls the antenna line devices (ALDs) and supplies DC power to them via a common bus. ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.

Remote Electrical Tilt

POWERWAVE

Remote Electrical Tilt (RET)

RET Single Band RET Dual Band RET Triple Band RET iRET Antenna Controller Module iRET 8510 Master Control Units MCU Current Injector Layer One Converter CILOC RET System Cables RET System Cables

Page 473 482 485 Page 488 Page 491 Page 498 Page 505

472

Remote Electrical Tilt

POWERWAVE

Single Band RET

Remote Electrical Tilt


Single Band RET

Standard AISG V2.0/3GPP (AISG1.1, Ericsson configurable) AISG V2.0/3GPP (AISG1.1, Ericsson configurable) AISG1.1 (AISG V2.0/3GPP, Ericsson configurable)
AISG V1.1 (V2.0/3GPP, Ericsson configurable) AISG V1.1 (V2.0/3GPP, Ericsson configurable) AISG V1.1 (V2.0/3GPP, Ericsson configurable) AISG V1.1 (V2.0/3GPP, Ericsson configurable) AISG V1.1 (V2.0/3GPP, Ericsson configurable)

Start-up Power Supply Surge +10 to +30 V <1mC

Current Consumption(idle) 19V

Part Number 8110.40

Page 474

+10 to +30 V

<1mC

19V

8210.40

475

+10 to +30 V

<1mC

19V

8110.10

476

+10 to +30 V +10 to +30 V +10 to +30 V +10 to +30 V +10 to +30 V

<1mC <1mC <1mC <1mC <1mC

19V 19V 19V 19V 19V

8212.10 8212.40 8211.10 8211.40 8212.10

477 478 479 480 481

473

POWERWAVE

Remote Electrical Tilt

8110.40

Single Band RET

ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8110.40 AISG V2.0/3GPP (AISG1.1 , Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 62 x 78 x 216 M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.

Rev1.0 / Oct 27 2009

Updated: 2010-05-10

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

474

POWERWAVE

Remote Electrical Tilt

8210.40

Single Band RET for Multiband Antennas (Controlling white antenna array)

ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8210.40 AISG V2.0/3GPP (AISG1.1 , Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.

Updated: 2010-05-10

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

475

POWERWAVE

Remote Electrical Tilt

8110.10

Single Band RET

ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8110.10 AISG1.1 (AISG V2.0/3GPP , Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 62 x 78 x 216 M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.

Rev1.0 / Oct 27 2009

Updated: 2010-05-10

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

476

POWERWAVE

Remote Electrical Tilt

8212.10

Single Band RET for Multiband Antennas (Controlling blue antenna array)

ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8212.10 AISG V1.1 (V2.0/3GPP, Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your s

Updated: 2010-05-10

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

477

POWERWAVE

Remote Electrical Tilt

8212.40

Single Band RET for Multiband Antennas (Controlling blue antenna array)

ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8212.40 AISG V2.0/3GPP (AISG1.1 , Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.

Updated: 2010-05-10

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

478

POWERWAVE

Remote Electrical Tilt

8211.10

Single Band RET for Multiband Antennas (Controlling red antenna array)

ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8211.10 AISG V1.1 (V2.0/3GPP, Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your s

Updated: 2010-05-10

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

479

POWERWAVE

Remote Electrical Tilt

8211.40

Single Band RET for Multiband Antennas (Controlling red antenna array)

ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8211.40 AISG V2.0/3GPP (AISG1.1 , Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.

Updated: 2010-05-10

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

480

POWERWAVE

Remote Electrical Tilt

8212.10

Single Band RET for Multiband Antennas (Controlling blue antenna array)

ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8212.10 AISG V1.1 (V2.0/3GPP, Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your s

Updated: 2010-05-10

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

481

Remote Electrical Tilt

POWERWAVE

Dual Band RET

Remote Electrical Tilt


Dual Band RET

Standard AISG V2.0/3GPP (AISG1.1, Ericsson configurable) AISG v1.1

Start-up Power Supply Surge +10 to +30 V <1mC

Current Consumption(idle) 19V

Part Number 8220.40

Page 483

+10 to +30 V

<1mC

19V

8220.10

484

482

POWERWAVE

Remote Electrical Tilt

8220.40

Dual Band RET

ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8220.40 AISG V2.0/3GPP (AISG1.1) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65 C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.

Updated: 2010-08-19

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

483

POWERWAVE

Remote Electrical Tilt

8220.10

DualBand RET

ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8220.10 AISG v1.1 (AISG V2.0/3GPP) +10 to +30 V <1mC <400mA at Vin ,19V, <250mA at Vin>19V <100mA at Vin <19V, <50mA at Vin>19V 9.6kbps <0.8mm -40 to +65C Conformity with the relevent provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500,000 hrs.

MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your s

Updated: 2010-08-19

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

484

Remote Electrical Tilt

POWERWAVE

Triple Band RET

Remote Electrical Tilt


Triple Band RET

Standard AISG V2.0/3GPP (AISG1.1, Ericsson configurable) AISG v1.1

Start-up Power Supply Surge +10 to +30 V <1mC

Current Consumption(idle) 19V

Part Number 8230.40

Page 486

+10 to +30 V

<1mC

19V

8230.10

487

485

POWERWAVE

Remote Electrical Tilt

8230.40

Triple Band RET

ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8230.40 AISG V2.0/3GPP (AISG1.1) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65 C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system.

Updated: 2010-08-19

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

486

POWERWAVE

Remote Electrical Tilt

8230.10

Triple Band RET

ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8230.10 AISG v1.1 (AISG V2.0/3GPP) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps < +/- 0.8mm -40 to +65 C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 1 kg 125 x 213 x 62 (excluding mounting screws) M6 screw IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your s

Updated: 2010-08-19

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

487

Remote Electrical Tilt

POWERWAVE

iRET Antenna Controller Module

Remote Electrical Tilt


iRET Antenna Controller Module 8510

Standard AISG V2.0/3GPP (AISG1.1, Ericsson configurable) AISG V2.0/3GPP (AISG1.1, Ericsson configurable)

Start-up Power Supply Surge +10 to +30 V <1mC

Current Consumption(idle) 19V

Part Number 8510.10

Page 489

+10 to +30 V

<1mC

19V

8510.40

490

488

POWERWAVE

Remote Electrical Tilt

8510.10

iRET ANTENNA CONTROLLER MODULE

ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8510.10 AISG1.1 (AISG V2.0/3GPP , Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps NA -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 0.33 kg 125 x 65 x 26 (excluding connectors) Grounded Via Antenna IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system

Updated: 2010-05-30

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

489

POWERWAVE

Remote Electrical Tilt

8510.40

iRET ANTENNA CONTROLLER MODULE

ELECTRICAL SPECIFICATIONS*
Product Number Standard Power supply Start up surge Current Consumption during tilting Current Consumption idle AISG Data Rate Rod positioning accuracy Operating Temperature Type Approvals MTBF 8510.40 AISG V2.0/3GPP (AISG1.1 , Ericsson configurable) +10 to +30 V <1mC <400mA at Vin <19V, <250 mA at Vin >19V <100mA at Vin <19V, <50mA at Vin >19V 9.6 kbps NA -40 to +65C Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG >500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight Dimensions (W,L,H) (mm) Connector Protection Ground Connector AISG Ingress protection Environmental 0.33 kg 125 x 65 x 26 (excluding connectors) Grounded Via Antenna IEC 60130-9 (Ed 3.0) IP65 ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high requirements for reliability, flexibility and efficiency in remote control of towermounted telecommunication equipment. This system consists of a Master Control Unit (MCU) that controls the Antenna Line Devices (ALDs) and supplies DC power to them via a common bus, ALDs are connected to the MCU using a separate ALD system cable or by using the existing RF feeders in your system

Updated: 2010-05-31

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

490

Master Control Unit

POWERWAVE

Master Control Unit

Remote Electrical Tilt


Master Control Unit

Type Master Control Unit Master Control Unit Master Control Unit Layer One Converter Master Control Unit Layer One Converter Master Control Unit Layer One Converter Master Control Unit

Current Consumption 115/230 VAC 1.7 / 1.0A 24V / <5.0A 48V / <2.5A 115/230 VAC 1.7 / 1.0A 24V / <5.0A 48V / <2.5A

Power Supply AC 24V -48V AC 24V -48V

Part Number 7070.10 (AC) 7070.30 (24 V) 7070.50 (-48V) 7072.10 (AC) 7072.30 (24 V) 7072.50 (-48V)

Page 492 493 494 495 496 497

491

POWERWAVE

Master Control Unit

7070.10 (AC)

Master Control Unit

ELECTRICAL SPECIFICATIONS
Power supply AC / Current consumption ALD supply voltage Max current draw per connector Total current draw all connectors Surge at start up all connectors AC 115/230 VAC 1.7 / 1.0A +24 V DC 2.7 A 3.48 A 54 mC during <10 ms

LOCAL ALARM PORTS (IN port)


Output voltage at open Output current at closed 5 1 V 5 2mA

LOCAL CONTROL PORTS (Out ports, 3-pole relays)


Max input Voltage Max input current AISG data rate Weight Dimensions 30 V DC 0.5 A 9.6 kbps, 38.4 kbps < 2.5 kg Width 19 rack, Height 44mm, Depth 207mm

ENVIRONMENTAL SPECIFICATIONS
DC power supply AC power supply RET 1 to 3 Site LAN Local (Ethernet port) RS-232 Local alarm Type Approvals MTBF Operating temperature Environmental CAP 2 Circuit universal MATE-N-LOK 350778-1 IEC/EB60320-1 Male IEC 60130-9 (Ed. 3.0) 4-pole RJ45 MDI 4-pole RJ45 MDI 9-pin d-SUB male Connector panel Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG. >250.000 hrs -5C to 60C ETSI 300 019 * Weather-protected locations*

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08237 Rev A

Updated: 2008-03-31

492

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Master Control Unit

7070.30 (24 V)

Master Control Unit

ELECTRICAL SPECIFICATIONS
Power supply DC / Current consumption ALD supply voltage Max current draw per connector Total current draw all connectors Surge at start up all connectors 24V 24V / <5.0A +24 V DC 2.7 A 3.48 A 54 mC during <10 ms

LOCAL ALARM PORTS (IN port)


Output voltage at open Output current at closed 5 1 V 5 2mA

LOCAL CONTROL PORTS (Out ports, 3-pole relays)


Max input Voltage Max input current AISG data rate Weight Dimensions 30 V DC 0.5 A 9.6 kbps, 38.4 kbps < 2.5 kg Width 19 rack, Height 44mm, Depth 207mm

ENVIRONMENTAL SPECIFICATIONS
DC power supply AC power supply RET 1 to 3 Site LAN Local (Ethernet port) RS-232 Local alarm Type Approvals MTBF Operating temperature Environmental CAP 2 Circuit universal MATE-N-LOK 350778-1 IEC/EB60320-1 Male IEC 60130-9 (Ed. 3.0) 4-pole RJ45 MDI 4-pole RJ45 MDI 9-pin d-SUB male Connector panel Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG. >250.000 hrs -5C to 60C ETSI 300 019 * Weather-protected locations*

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08237 Rev A

Updated: 2008-10-22

493

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Master Control Unit

7070.50 (-48V)

Master Control Unit

ELECTRICAL SPECIFICATIONS
Power supply DC / Current consumption ALD supply voltage Max current draw per connector Total current draw all connectors Surge at start up all connectors -48V 48V / <2.5A +24 V DC 2.7 A 3.48 A 54 mC during <10 ms

LOCAL ALARM PORTS (IN port)


Output voltage at open Output current at closed 5 1 V 5 2mA

LOCAL CONTROL PORTS (Out ports, 3-pole relays)


Max input Voltage Max input current AISG data rate Weight Dimensions 30 V DC 0.5 A 9.6 kbps, 38.4 kbps < 2.5 kg Width 19 rack, Height 44mm, Depth 207mm

ENVIRONMENTAL SPECIFICATIONS
DC power supply AC power supply RET 1 to 3 Site LAN Local (Ethernet port) RS-232 Local alarm Type Approvals MTBF Operating temperature Environmental CAP 2 Circuit universal MATE-N-LOK 350778-1 IEC/EB60320-1 Male IEC 60130-9 (Ed. 3.0) 4-pole RJ45 MDI 4-pole RJ45 MDI 9-pin d-SUB male Connector panel Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG. >250.000 hrs -5C to 60C ETSI 300 019 * Weather-protected locations*

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08237 Rev A

Updated: 2008-03-31

494

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Master Control Unit

7072.10 (AC)

Layer One Converter Master Control Unit

ELECTRICAL SPECIFICATIONS
Power supply AC / Current consumption ALD supply voltage Max current draw per connector Total current draw all connectors Surge at start up all connectors AC 115/230 VAC 1.7 / 1.0A +24 V DC 2.7 A 3.48 A 54 mC during <10 ms

LOCAL ALARM PORTS (IN port)


Output voltage at open Output current at closed 5 1 V 5 2mA

LOCAL CONTROL PORTS (Out ports, 3-pole relays)


Max input Voltage Max input current AISG data rate Weight Dimensions 30 V DC 0.5 A 9.6 kbps, 38.4 kbps < 2.5 kg Width 19 rack, Height 44mm, Depth 207mm

ENVIRONMENTAL SPECIFICATIONS
DC power supply AC power supply RET 1 to 3 Site LAN Local (Ethernet port) RS-232 Local alarm Type Approvals MTBF Operating temperature Environmental CAP 2 Circuit universal MATE-N-LOK 350778-1 IEC/EB60320-1 Male SMA (female) 4-pole RJ45 MDI 4-pole RJ45 MDI 9-pin d-SUB male Connector panel Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG. >250.000 hrs -5C to 60C ETSI 300 019 * Weather-protected locations*

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08238 Rev A

Updated: 2008-05-20

495

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Master Control Unit

7072.30 (24 V)

Layer One Converter Master Control Unit

ELECTRICAL SPECIFICATIONS
Power supply DC / Current consumption ALD supply voltage Max current draw per connector Total current draw all connectors Surge at start up all connectors 24V 24V / <5.0A +24 V DC 1.16 A 3.48 A 54 mC during <10 ms

LOCAL ALARM PORTS (IN port)


Output voltage at open Output current at closed 5 1 V 5 2mA

LOCAL CONTROL PORTS (Out ports, 3-pole relays)


Max input Voltage Max input current AISG data rate Weight Dimensions 30 V DC 0.5 A 9.6 kbps, 38.4 kbps < 2.5 kg Width 19 rack, Height 44mm, Depth 207mm

ENVIRONMENTAL SPECIFICATIONS
DC power supply AC power supply RET 1 to 3 Site LAN Local (Ethernet port) RS-232 Local alarm Type Approvals MTBF Operating temperature Environmental CAP 2 Circuit universal MATE-N-LOK 350778-1 IEC/EB60320-1 Male SMA (female) 4-pole RJ45 MDI 4-pole RJ45 MDI 9-pin d-SUB male Connector panel Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG. >250.000 hrs -5C to 60C ETSI 300 019 * Weather-protected locations*

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08238 Rev A

Updated: 2008-10-22

496

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Master Control Unit

7072.50 (-48V)

Layer One Converter Master Control Unit

ELECTRICAL SPECIFICATIONS
Power supply DC / Current consumption ALD supply voltage Max current draw per connector Total current draw all connectors Surge at start up all connectors -48V 48V / <2.5A +24 V DC 1.16 A 3.48 A 54 mC during <10 ms

LOCAL ALARM PORTS (IN port)


Output voltage at open Output current at closed 5 1 V 5 2mA

LOCAL CONTROL PORTS (Out ports, 3-pole relays)


Max input Voltage Max input current AISG data rate Weight Dimensions 30 V DC 0.5 A 9.6 kbps, 38.4 kbps < 2.5 kg Width 19 rack, Height 44mm, Depth 207mm

ENVIRONMENTAL SPECIFICATIONS
DC power supply AC power supply RET 1 to 3 Site LAN Local (Ethernet port) RS-232 Local alarm Type Approvals MTBF Operating temperature Environmental CAP 2 Circuit universal MATE-N-LOK 350778-1 IEC/EB60320-1 Male SMA (female) 4-pole RJ45 MDI 4-pole RJ45 MDI 9-pin d-SUB male Connector panel Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG. >250.000 hrs -5C to 60C ETSI 300 019 * Weather-protected locations*

*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08238 Rev A

Updated: 2008-06-02

497

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Remote Electrical Tilt

POWERWAVE

Current Injector Layer One Converter

Remote Electrical Tilt


Current Injector Layer One Converter

Frequency Range (MHz) 806-960 MHz and 1710-2180 MHz 806-960 MHz and 1710-2180 MHz 698-960 MHz and 1710-2180 MHz
698-960 MHz and 1710-2180 MHz

Insertion Loss Return Loss Return Loss (dB) (dB) ANT Port (dB) BTS Port Part Number <0.2 dB <0.2 dB <0.2 dB <0.2 dB <0.1 dB <0.1 dB >20 dB >20 dB >20 dB >20 dB >22 dB >22 dB >20 dB >20 dB >20 dB >20 dB >22 dB >22 dB 7060.00 (ANT) 7060.10 (BTS) 7060.05 (ANT) 7060.15 (BTS) 1001940 (BTS side) 1001983 (ANT side)

Page 499 500 501 502 503 504

800-2300 MHz 800-2300 MHz

498

POWERWAVE

Current Injector Layer One Converter

7060.00 (ANT)

Current Injector Layer One Converter

ELECTRICAL DATA
Range(MHz) Frequency Range Insertion Loss(dB) Return Loss(dB) ANT Port Return Loss(dB) BTS Port Passive Intermodulation 2X43 dBm Power Handling(dBm) Power Supply Current Consumption Current Handling AISG Data Rate Up-Link(MHz) Down-link(MHz) Power Consumption 806-960 MHz and 1710-2180 MHz 806-960 MHz and 1710-2180 MHz <0.2 dB >20 dB >20 dB <-116 dBm Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm +9 to +31 V < 50 mA = 1.3 A 9.6 kbps, 38.4 kbps 1850-1910 1930-1990 N/A

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(kg) RF Connectors AISG Output Protection Ground Type Approvals Ingress Protection IP65 <48 x 92 x 80 <750 g DIN 7/16 female/ male IEC 60130-9 E (Ed 3.0) M8 screw Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG N/A

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C) MTBF Ingress Protection -40 to +65 C > 500,000 hrs IP65

APPROVAL AND TESTS


Environmental Type Approvals ETSI 300 019 Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

The purpose of this long sentence is to push down the line.


D031-08236 Rev A Updated: 2010-04-05

499

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Current Injector Layer One Converter

7060.10 (BTS)

Current Injector Layer One Converter

ELECTRICAL DATA
Range(MHz) Frequency Range Insertion Loss(dB) Return Loss(dB) ANT Port Return Loss(dB) BTS Port Passive Intermodulation 2X43 dBm Power Handling(dBm) Power Supply Current Consumption Current Handling AISG Data Rate Up-Link(MHz) Down-link(MHz) Power Consumption 806-960 MHz and 1710-2180 MHz 806-960 MHz and 1710-2180 MHz <0.2 dB >20 dB >20 dB <-116 dBm Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm +9 to +31 V < 50 mA = 1.3 A 9.6 kbps, 38.4 kbps 1850-1910 1930-1990 N/A

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(kg) RF Connectors AISG Output Protection Ground Type Approvals Ingress Protection IP65 <48 x 92 x 80 <750 g DIN 7/16 female/ male IEC 60130-9 E (Ed 3.0) M8 screw Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG N/A

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C) MTBF Ingress Protection -40 to +65 C > 500,000 hrs IP65

APPROVAL AND TESTS


Environmental Type Approvals ETSI 300 019 Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

The purpose of this long sentence is to push down the line.


D031-08236 Rev A Updated: 2010-04-05

500

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Current Injector Layer One Converter

7060.05 (ANT)

Current Injector Layer One Converter

ELECTRICAL DATA
Range(MHz) Frequency Range Insertion Loss(dB) Return Loss(dB) ANT Port Return Loss(dB) BTS Port Passive Intermodulation 2X43 dBm Power Handling(dBm) Power Supply Current Consumption Current Handling AISG Data Rate Up-Link(MHz) Down-link(MHz) Power Consumption N/A 698-960 MHz and 1710-2180 MHz 698-960 MHz and 1710-2180 MHz <0.2 dB >20 dB >20 dB <-116 dBm Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm +9 to +31 V < 50 mA = 1.3 A 9.6 kbps, 38.4 kbps

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(kg) RF Connectors AISG Output Protection Ground Type Approvals Ingress Protection IP65 <48 x 92 x 80 <750 g 7/16 Male/BTS, Female/ANT side IEC 60130-9 E (Ed 3.0) M8 screw Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG N/A

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C) MTBF Ingress Protection -40 to +65 C > 500,000 hrs IP65

APPROVAL AND TESTS


Environmental Type Approvals ETSI 300 019 Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

The purpose of this long sentence is to push down the line.


D031-08236 Rev B Updated: 2010-04-05

501

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Current Injector Layer One Converter

7060.15 (BTS)

Current Injector Layer One Converter

ELECTRICAL DATA
Range(MHz) Frequency Range Insertion Loss(dB) Return Loss(dB) ANT Port Return Loss(dB) BTS Port Passive Intermodulation 2X43 dBm Power Handling(dBm) Power Supply Current Consumption Current Handling AISG Data Rate Up-Link(MHz) Down-link(MHz) Power Consumption N/A 698-960 MHz and 1710-2180 MHz 698-960 MHz and 1710-2180 MHz <0.2 dB >20 dB >20 dB <-116 dBm Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm +9 to +31 V < 50 mA = 1.3 A 9.6 kbps, 38.4 kbps

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(kg) RF Connectors AISG Output Protection Ground Type Approvals Ingress Protection IP65 <48 x 92 x 80 <750 g 7/16 Female/BTS, Male/ANT side IEC 60130-9 E (Ed 3.0) M8 screw Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG N/A

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C) MTBF Ingress Protection -40 to +65 C > 500,000 hrs IP65

APPROVAL AND TESTS


Environmental Type Approvals ETSI 300 019 Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

The purpose of this long sentence is to push down the line.


D031-08236 Rev B Updated: 2010-04-05

502

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Current Injector Layer One Converter

1001940 (BTS side)

Current Injector Layer One Converter

High RF power CILOC for communication and DC supply over the RF feeder to the ALDs ELECTRICAL DATA
Range(MHz) Frequency Range Insertion Loss(dB) Return Loss(dB) ANT Port Return Loss(dB) BTS Port Passive Intermodulation 2X43 dBm Power Handling(dBm) Power Supply Current Consumption Current Handling AISG Data Rate Up-Link(MHz) Down-link(MHz) Power Consumption <4.0 A 9.6 kbps,38.4 kbps 800-2300 <0.1 dB >22 dB >22 dB <-130 dBm (7th) 750W =500W (800 MHz)+ 250W (1900MHz) +10 to+30V

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(kg) RF Connectors AISG Output Protection Ground Type Approvals Ingress Protection IP65 Bellcore #TA-NWT-000487 Procedure 4.11 < 3.7 x 1.7 x 5.7 excl. conn <2 DIN 7/16 female/male

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C) MTBF Ingress Protection -40 to +85C >500.000 hrs. IP67

APPROVAL AND TESTS


Environmental Type Approvals Bellcore #TA-NWT-000487 Procedure 4.11

The purpose of this long sentence is to push down the line.


Updated: 2010-04-05

503

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Current Injector Layer One Converter

1001983 (ANT side)

Current Injector Layer One Converter

High RF power CILOC for communication and DC supply over the RF feeder to the ALDs ELECTRICAL DATA
Range(MHz) Frequency Range Insertion Loss(dB) Return Loss(dB) ANT Port Return Loss(dB) BTS Port Passive Intermodulation 2X43 dBm Power Handling(dBm) Power Supply Current Consumption Current Handling AISG Data Rate Up-Link(MHz) Down-link(MHz) Power Consumption <4.0 A 9.6 kbps,38.4 kbps 800-2300 <0.1 dB >22 dB >22 dB <-130 dBm (7th) 750W =500W (800 MHz)+ 250W (1900MHz) +10 to+30V

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft) Weight(kg) RF Connectors AISG Output Protection Ground Type Approvals Ingress Protection IP65 Bellcore #TA-NWT-000487 Procedure 4.11 < 3.7 x 1.7 x 5.7 excl. conn <2 DIN 7/16 female/male

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C) MTBF Ingress Protection -40 to +85C >500.000 hrs. IP67

APPROVAL AND TESTS


Environmental Type Approvals Bellcore #TA-NWT-000487 Procedure 4.11

The purpose of this long sentence is to push down the line.


Updated: 2010-04-05

504

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Remote Electrical Tilt

POWERWAVE

RET System Cables

Remote Electrical Tilt


RET System Cables

Continuous Current DC Ports 3.5 A

Continuous AISG Output Input

Operation Temperature Range

Conductor Area 2x 0.25mm2 (388 mil2) + 3x 0.75mm2 (1162 mil2) 2x 0.25mm2 (388 mil2) + 3x 0.75mm2 (1162 mil2)

Part Number 7085.XX

Page 506

IEC 60130-9 (Ed. 3.0) -40 to +65C

3.5 A

IEC 60130-9 (Ed. 3.0) -40 to +65C

7095.XX

507

505

POWERWAVE

RET System Cables

7085.XX

RET System Cables

SPECIFICATIONS*
Product Number Continuous Current DC Ports Connectors AISG Output Input Operation Temperature Range Conductor Area Type Approvals Ingress Protection Environmental Color 7085.XX 3.5 A IEC 60130-9 (Ed. 3.0) -40 to +65 2x 0.25mm2 (388 mil2) + 3x 0.75mm2 (1162 mil2) Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG IP67 mated ETSI 300 019 Black

7085.05 7085.15 7085.30 7085.50

RET short cable 0.5m RET short cable 1.5m RET short cable 3.0m RET short cable 5.0m

8-Pin Connector

Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8

+12 V Not connected RS-485B Not connected RS-485A +24 V DC return Not connected

+12 V Not connected RS-485B Not connected RS-485A +24 V DC return Not connected

ooPPPP

Updated: 2010-04-05

506

Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

RET System Cables

7095.XX

RET Systems Cable

SPECIFICATIONS*
Product Number Continuous Current DC Ports Connectors AISG Output Input Operation Temperature Range Conductor Area Type Approvals Ingress Protection Environmental Color 7095.XX 3.5 A IEC 60130-9 (Ed. 3.0) -40 to +65C 2x 0.25mm2 (388 mil2) + 3x 0.75mm2 (1162 mil2) Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG IP67 mated ETSI 300 019 Black

7095.10 7095.20 7095.30 7095.40 7095.50 7095.60 7095.70 7095.80 7095.90 7095.110

RET long cable 10m RET long cable 20m RET long cable 30m RET long cable 40m RET long cable 50m RET long cable 60m RET long cable 70m RET long cable 80m RET long cable 90m RET long cable 110m

8-Pin Connector

Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8

+12 V Not connected RS-485B Not connected RS-485A +24 V DC return Not connected

+12 V Not connected RS-485B Not connected RS-485A +24 V DC return Not connected

Updated: 2010-04-05

Copyright 2011 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

507

Indoor Antennas

Power wave

The indoor antenna is designed to blend into a wall or ceiling inside a building and is the base antenna for the Powerwave distributed antenna system. The indoor antenna covers all bands from 800 MHz up to 2500 MHz and supports multiband operation. Easy-to-install dual band antennas from Powerwave are deployed in numerous wireless networks worldwide. Using fewer antennas of discreetly functional design beats using numerous antennas of unsightly size and appearance especially with todays aesthetic concerns.

Indoor Antennas

POWERWAVE

Indoor Antennas

Indoor Dual Band Antennas Cross Polarized Indoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz Indoor Multiband Antennas Vertical Polarized Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz Page 512 Page 510

509

Dual Band Indoor Antennas

POWERWAVE

Indoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz

Dual Band Indoor Antennas


Cross Polarized Indoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz

Horizontal Beamwidth 70

Gain dBi dBd 9/6.9, 9/6.9

Tilt 0

Length 216mm (8.5)

Part Number 7999.00

Page 511

510

POWERWAVE

Dual Band Indoor Antennas

7999.00

Indoor/Outdoor Dual Band Cross Polarized

POLARIZATION: X-Pol FREQUENCY (MHz): 800/1900 HORIZONTAL BEAM WIDTH (): 70 GAIN (dBi/dBd): 9/6.9, 9/6.9 TILT: 0 LENGTH: 216mm (8.5)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Front to back ratio (dB) 18030 copolar Cross polar discrimination (XPD) 0 (dB) Cross polar discrimination (XPD) 60 (dB) IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1.5:1 72 70 0 16 20 8 <-141 50 806-896 9/6.9 X-Pol 50 1.5:1 56 60 0 28 15 4 800/1900 1850-1990 9/6.9

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, kg (lbs) Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) RAL 7035, Light grey 2 x N Female Bottom 216x216x73.7 (8.5x8.5x2.9) 0.73 (1.6)

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08182 Rev A

Updated: 2010-04-09

511

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Multiband Indoor Antennas

POWERWAVE

Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz

Multiband Indoor Antennas


Cross Polarized Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz

Horizontal Beamwidth 60/90 360

Gain dBi dBd 6/3.9, 9/6.9 3/0.9

Tilt 0 0

Length 0.210m (8") 0.185m ( 7)

Part Number 7336.10 7336.00

Page 513 514

512

POWERWAVE

Multiband Indoor Antennas

7336.10

Indoor Multiband Panel Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 800-2500 HORIZONTAL BEAM WIDTH (): 60/90 GAIN (dBi/dBd): 6/3.9, 9/6.9 TILT: 0 LENGTH: 0.210m (8)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Horizontal beam width, -3 dB () Vertical beam width, -3 dB () Electrical down tilt () Front to back ratio (dB) 18030 copolar IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 16 15 <-150 50 <1.9:1 95 85 <1.5:1 85 80 0 12 17 806-896 6.5/4.4 870-960 6.5/4.4 Vertical 50 <1.9:1 65 40 <1.8:1 60 40 800-2500 1700-1900 9.5/7.4 1900-2500 10/7.9

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, HxWxD, mm (ft) Mounting Weight, kg (lbs) Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) ASA White 240x280x45 (9x11x2) 1.2 (2.6) 1 x N Female Bottom 210 x 180 x 42 (8x7x2) 1.0 (2.2)

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08159 Rev A

Updated 04/09/2010

Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

513

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Multiband Indoor Antennas

7336.00

Indoor Multiband Vertical Polarized

POLARIZATION: V-Pol FREQUENCY (MHz): 800-2500 HORIZONTAL BEAM WIDTH (): 360 GAIN (dBi/dBd): 3/0.9 TILT: 0 LENGTH: 0.185m ( 7)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz) Frequency band (MHz) Gain (dBi/dBd) Polarization VSWR Beam width: Ceiling Mounted () Beam width: Wall Mounted () IM3, 2xTx@43dBm (dBc) Power handling, average total (W) 1.5:1 360 70 1.5:1 360 70 <-150 50 806-896 3/0.9 870-960 3/0.9 Vertical 50 1.5:1 360 70 1.5:1 360 70 800-2500 1700-1900 3/0.9 1900-2500 3/0.9

MECHANICAL SPECIFICATIONS*
Connector Connector position Dimensions, diameter x depth, mm (ft) Mounting Weight, kg (lbs) Operating Temperature Radome material Radome colour Package size, HxWxD, mm (ft) Shipping weight, kg (lbs) ABS White 210x200x115 (8x8x5) 0.36 (0.8) 1 x N Female Back 185 x65 (7 x 2.5) 0.2 (0.44)

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08158 Rev A

Updated: 2010-04-09

514

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Clean Site Solutions

Power wave

Powerwaves Clean Site solutions minimize the visual impact of a complete antenna system and significantly reduce investment and operational costs for network operators when building new or upgrading existing networks. Building permits for existing antenna installations can be used when replacing old, passive antennas with the Clean Site solution. This simplifies the site acquisition process significantly and shortens roll-out time considerably. All Clean Site antennas support remote electrical tilt for optimization of the coverage footprint and tuning of network performance. By integrating all functionality into one single unit, Clean Site offers you a flexible and attractive solution in the most cost-effective way.

Clean Site Solutions

POWERWAVE

Clean Site Solutions: Overview

The Powerwave Clean Site program integrates a full range of multiband solutions to make the most of tower space. High-volume production in several countries ensures rapid delivery. Our products provide design and installation flexibility that meet a variety of needs, such as enabling co-siting of networks and systems and dealing with space and zoning issues limiting the appearance and location of new installations. Single System The baseline for the Clean Site single system is our single band broadband antenna portfolio with cross polar diversity for either low band or high band. Our low band antenna covers the full frequency range from 806-960 MHz while the high band antenna covers 1710- 2170 MHz. Customize your Clean Site single unit by combining a low band antenna with a remote electrical tilt (RET) Unit or a high band antenna with a tower mounted amplifier (TMA) for either an 1800, 1900 or 2100 frequency band and RET Unit. No matter the combination, your customized Clean Site single system is contained in one single housing enclosure. Dual System The Clean Site dual solution's basic configuration stems from the Powerwave dual band low band/high band antennas. Combine the dual band antenna with remote electrical tilt (RET) units, tower mounted amplifiers (TMA) and diplex filters to suit your network requirements. As with all Clean Site units, all of the necessary components are contained in one discrete enclosure. Triple System The Powerwave Clean Site triple solution is the most advanced antenna system within the Clean Site program. The Clean Site triple solution is based on the high performance triple band antenna platform and is the superior solution for co-siting. An old installed passive antenna can be replaced by a Clean Site triple system with remote electrical tilt (RET) Control and two dual TMAs and two triplexers without changing the visual impact. IntelliMast As a part of the Powerwave Clean Site program, the IntelliMast offers a flexible way of integrating multi-sector solutions in a pole configuration under one single radome. IntelliMast-CS, supporting the full broad band antenna range, is the mounting solution to use when more than one sector is covered from a single location. If a crane free installation is required, the super light weight Intellimast-PL is the solution to use, supporting the 1.4m (4 feet) multiband antennas. The IntelliMast solution offers maximum sector coverage with minimum visual impact.

516

Mounting Solutions

Power wave

All Powerwave antennas are delivered with mounting brackets pre-mounted. The intent is to reduce logistic and tower crew installation costs for our customers. All brackets have a high quality surface treatment to maintain the Powerwave standard for product exposure to severe environments. By using steel in the sheet metal parts of the tilt brackets, a robust and rigid design is ensured.

Mounting Solutions

POWERWAVE

Mounting Solutions

Heavy Duty Tilt Bracket Part Numbers 7256.00 Tilt Bracket Part Numbers 7456.00A Triple Mount Bracket Part Numbers 7454.00A Large Pole Mounting Adapter Part Numbers 7458.00A Page 522 Page 521 Page 520 Page 519

518

POWERWAVE

Mounting Solutions

7256.00

Heavy Duty Tilt Bracket Kit

ANTENNA LENGTH: =1.5 meter/5 feet WEIGHT: 5.5 kg/ 12.1 lbs

CROSS REFERENCE TABLE


Family LBB65 LBB90 DHBB DBB65 DBB90 TBB65 ALP City Urban Xurban AL Antennas 5 Series 747x.xx, 747x.xxA, 547x.xx, 746x.0ST.xxxx.xx 748x.xx, 748x.xxA, 548x.xx 776x.xx, 776x.xxA, 576x.xx, 876x.0ST.xxxx.xx 775x.xx, 775x.xxA, 5475x.xx, 875x.0ST.xxxx.xx 777x.xx 778x.xx, 778x.xxA, 578x.xx, 878x.0ST.xxxx.xx 7804.00, 7824.00, 7834.00, 7838.00 7143.xx.xx.xx, 7144.xx.xx.xx, 7145.xx.xx.xx 7218.1x 7227.1x 7840.x0, 7850.x0, 7329.0x, 7330.0x, 7331.0x, 7332.0x, 7333.0x, 7334.0x 547x.xx, 548x.xx, 576x.xx, 575x.xx, 578x.xx, 5722.xx Part Number

MECHANICAL DRAWINGS

MECHANICAL SPECIFICATIONS
Dimensions, H x W x D Weight Material Packing size, H x W x D Shipping weight Tilt range Pole dimension Panning range Accessory products See Drawings 5.5 kg/ 12.1 lbs Galvanized steel Call for info 5.9 kg/ 13 lbs See diagram 25.4-114.3 mm (1-4.5) NA Triple Mount Bracket 7454.00

TILT ANGLE GRAPH

All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets. Random Vibration: Sinus Vibration: IEC 60068-2-64 IEC 60028-2-6

Salt Mist: IEC 68-2-11, test Ka, 35 C, 48h, 5% salt


Updated: 2010-10-25

519

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Mounting Solutions

7456.00A

Tilt Bracket Kit

ANTENNA LENGTH: <1.5 meter/ 5 feet WEIGHT: 3.6 kg/7.9 lbs

CROSS REFERENCE TABLE


Family LBB65 LBB90 DHBB DBB65 DBB90 TBB65 ALP City Urban Xurban AL Antennas 5 Series NA NA NA NA NA NA NA NA 7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x, 7275.0x, 7276.0x, 7277.0x, 7278.0x 7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x 7337.0x, 7338.0x, 7339.0x 570x.0x, 572x.x, 5735.x0, 5740.x0, 5745.x0 Part Number

MECHANICAL DRAWINGS

MECHANICAL SPECIFICATIONS
Dimensions, H x W x D Weight Material Packing size, H x W x D Shipping weight Tilt range Pole dimension Panning range Accessory products See Drawings 3.6 kg/7.9 lbs Galvanized steel, stainless screws & nuts Call for info 4.0 kg/ 8.8 lbs See diagram 25-115 mm NA Panning Kit 2201.11/ Big Pole Clamp, 7458.00/ Flush wall, pole clamp 7455.00 and Triple Mount Bracket 7454.00

TILT ANGLE GRAPH

All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets. Random Vibration: Sinus Vibration: IEC 60068-2-64 IEC 60028-2-6

Salt Mist: IEC 68-2-11, test Ka, 35 C, 48h, 5% salt


D031-08419 Rev. A Updated: 2010-04-05

520

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Mounting Solutions

7454.00A

Triple Mount Bracket

ANTENNA LENGTH: =1.5 meter/5 feet WEIGHT: 1.5 kg/3.3 lbs

The Powerwave Triple Mount Bracket allows the mounting of three antennas on a single support for a sturdy and elegant installation. The Triple Mount Bracket permits independent mechanical and electrical tilting of each sector, offering unparalleled versat

CROSS REFERENCE TABLE


Family LBB65 LBB90 DHBB DBB65 DBB90 TBB65 ALP City Urban Xurban AL Antennas 5 Series 747x.xx 748x.xx 776x.xx 775x.x0 777x.x0 778x.x0 7804.00, 7824.00, 7834.00, 7838.00 7143.xx.xx.xx, 7144.xx.xx.xx, 7145.xx.xx.xx 7218.1x, 7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x, 7275.0x, 7276.0x, 7277.0x, 7278.0x 7227.1x, 7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x 7337.0x, 7338.0x, 7339.0x, 7840.x0, 7850.x0, 7329.0x, 7330.0x, 7331.0x, 7332.0x, 7333.0x, 7334.0x 747x.xx, 748x.xx, 570x.0x, 572x.x, 5735.x0, 5740.x0, 5745.x0, 776x.xx, 775x.x0, 777x.x0, 778x.x0 Part Number

MECHANICAL DRAWINGS

MECHANICAL SPECIFICATIONS
Dimensions, H x W x D Weight Material Packing size, H x W x D Shipping weight Tilt range Pole dimension Panning range Accessory products See Drawings 6.8 kg/15 lbs Steel Call for info Call for info See diagram, Only antennas <1.5 m/ 5 feet 75-114 mm Call for info Can be used with antenna tilt brackets 7456.00A and 7256.00

TILT ANGLE GRAPH

All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets. Random Vibration: Sinus Vibration: Salt Mist: NA
D031-08417 Rev. A Updated: 2010-04-05

NA NA

521

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

POWERWAVE

Mounting Solutions

7458.00A

Large Pole Mounting Adapter

ANTENNA LENGTH: <1.5 meter/ 5 feet WEIGHT: 9.5 kg/ 20.9 lbs

Powerwave large pole mounting adapter is to be used with Powerwave antennas shorter than 1.5 meter/5 feet, see table below. Only one kit per antenna.

CROSS REFERENCE TABLE


Family LBB65 LBB90 DHBB DBB65 DBB90 TBB65 ALP City Urban Xurban AL Antennas 5 Series NA NA NA NA NA NA NA NA 7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x, 7275.0x, 7276.0x, 7277.0x, 7278.0x 7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x 7337.0x, 7338.0x, 7339.0x NA Part Number

MECHANICAL DRAWINGS

MECHANICAL SPECIFICATIONS
Dimensions, H x W x D Weight Material Packing size, H x W x D Shipping weight Tilt range Pole dimension Panning range Accessory products See Drawings 9.5 kg/ 20.9 lbs Galvanized steel, stainless screws & nuts 200 x 200 x 20 (mm) 10 kg/22 lbs NA Max 215/ mm 78.5 NA To be used with antenna tilt brackets 7456.00A

TILT ANGLE GRAPH

All brackets fulfill the requirements stated in the standards to follow. Antennas are tested together with their corresponding brackets. Random Vibration: Sinus Vibration: IEC 60068-2-64 IEC 60028-2-6

Salt Mist: IEC 68-2-11, test Ka, 35 C, 48h, 5% salt


D031-08520 Rev. A Updated: 2010-04-05

522

Copyright 2010 Powerwave Technologies, Inc. All rights reserved. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Antenna FAQ

POWERWAVE

Antenna FAQ

Q: A:

Are your indoor antennas broadband (7336.00, 7336.10)? Yes, these antennas work from 806 MHz through 2.5 GHz, providing an effective solution for multiple technologies such as iDEN, CDMA, GSM, UMTS, WiFi to name a few. Why do you specify different gain for the same antenna in your data sheet? The gain is dependent on the frequency used. The stacking distance of the elements is changed relative to the frequency. This means that the gain will increase with a higher frequency. Powerwave always tries to give you the best information possible, and therefore we specify the gain at common used frequency to help you implement the antennas easily in your network. Why do you use different materials in your radomes? Mechanical structure of antennas are designed in different ways. Powerwave uses either the reflector as the structure, or the radome in a combination with the reflector. When using the reflector as the base for the mechanical structure, the radome is only used for weather protection, and therefore we use a light plastic radome (ASA/GRP). When increasing the size of an antenna there is no benefit to use the reflector as the mechanical structure as it would increase the overall weight of the product. Therefore, when building larger sized antennas, Powerwave utilizes a combination of reflector and radome as the mechanical structure. Normally, a glass fibre radome is used in the latter instances. Thus, the mechanical structures of the Powerwave antennas are designed to minimize product weight while maintaining a robust and reliable solution. Why do you have different gain on your triple band antennas? Powerwave designs triple band antennas by using one low band antenna throughout the whole length, while you have the two upper band antennas on top of each other. This means that the high band antenna at the upper part of the antenna needs more internal cabling compared to the high band antenna at the lower part. This extra internal cabling introduces some more losses, and the result is that the gain of the upper high band antenna is slightly lower. How do I get antenna patterns? The antenna patterns are available at our webpage, please visit: www.powerwave.com/antennapatterns.asp. On this page you are able to download our antenna patterns for many different planning tools. Please contact us if you need assistance. You are mentioning broadband antennas - how do you define that? When Powerwave is stating broadband antennas, we are indicating that these can be used for more than one system. We usually state low broadband, meaning that the antennas can be used for systems operating from 806 to 960 MHz. High band usually means that the antennas can be used for systems from 1710 to 2170. Some antennas may differ from this. The reason why we design and produce broadband antennas is to achieve logistical benefits for our global customer base, allowing for deployments in all markets worldwide.

Q: A:

Q: A:

Q: A:

Q: A:

Q: A:

523

Network Management

Power wave

Powerwaves NetWay solution suite maximizes return on investment of wireless infrastructure by enabling network discovery, diagnosis and resolution from a centralized software interface in combination with networkaware hardware. NetWay gives you all the tools for fault, configuration, performance and security management. Centrally monitor and manage critical network resources, and adjust cell coverage during peak and off-peak hours, saving time, money and reducing the carbon footprint through fewer truck rolls.

POWERWAVE

NetWay Vision Software Solution

NWV-001

NetWay Vision Management Module

The NetWay Vision software product is an Element Management System (EMS), developed and supported by Powerwave Technologies. The NetWay Vision product provides service providers with centralized monitoring and management capabilities for advanced wireless systems, supplied by Powerwave Technologies.

GENERAL SPECIFICATIONS
NetWay Vision Licensing Software license based on number of managed network elements and number of con-current PC client users

NetWay Server Requirements

Rack mounted or standalone Intel Based Server equipped with, Ethernet 100/1000 Base-T Network Interface, Windows Server OS 2003/2008 Intel Based PC equipped with Color Monitor, Ethernet 10/100/1000 Base-T Network Interface, Windows XP, Internet Explorer 6/7 Updates and fixes for one full year, after installation of NetWay Vision is completed

User PC Client Requirements

Standard Warranty

Extended Warranty

Yearly Software Upgrades and Yearly Updates are available and can be separately purchased

Documentation

User Guide: D044-05258, Administrator Guide: D044-05313

Commercialize

Current Release NetWay Vision R3.5.0 (Aug - 2010) Planned upcoming Release NetWay Vision R3.6.0 (Dec - 2010)

Updated: 2010-11-30

Copyright 2010 Powerwave Technologies, Inc. All rights reserved.

525

All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Part Number Index Part Number Index Part N

POWERWAVE

Part Number Index

Part Number 010-11177-0214 010-11182-02nn 010-11183-02nn 010-50025-0232 1001940 (BTS side) 1001983 (ANT side) 24501, 24511 25001, 25011 25002, 25012 25014, 25016 25101, 25111 25102, 25112 25103, 25113 4168.11.33.00 4168.11.33.02 4168.11.33.03 4168.11.33.06 4168.11.33.52 4168.21.33.00 4168.21.33.03 5471.00 5472.00 5473.00 5477.00 5478.00 5478.06 5483.00 5488.00 5701.02 5721.00 5721.02 5722.00 5782.00 7060.00 (ANT) 7060.05 (ANT) 7060.10 (BTS) 7060.15 (BTS) 7070.10 (AC) 7070.30 (24 V) 7070.50 (-48V) 7072.10 (AC) 7072.30 (24 V) 7072.50 (-48V) 7085.XX 7095.XX 7216.03 7217.03 7217.04 7217.11 7218.03 7218.04 7218.05 7218.09

Page 30 31 32 33 503 504 29 34 35 36 37 38 39 350 351 352 353 354 348 349 259 260 261 262 263 264 265 266 237 238 239 240 319 499 501 500 502 492 493 494 495 496 497 506 507 328 332 331 330 338 339 343 344

Part Number 7218.13 7218.14 7218.15 7218.19 7225.04 7226.03 7226.04 7227.04 7227.14 7228.03 7228.04 7228.06 7228.08 7230.04 7231.04 7231.06 7232.04 7232.07 7233.04 7233.06 7233.08 7255.03 7255.04 7256.00 7263.01 7263.04 7270.02 7271.02 7271.03 7272.02 7273.02 7273.03 7281.02 7281.04 7282.03 7329.00B 7329.06B 7330.00B 7330.02B 7330.04B 7330.06B 7331.00B 7331.02B 7331.04B 7331.06B 7332.00B 7332.02B 7332.06B 7333.00B 7333.02B 7333.06B 7334.00B 7334.02B

Page 340 341 345 346 357 358 359 364 363 366 367 368 369 371 372 373 374 375 376 377 378 335 342 519 333 334 356 360 361 365 370 362 336 337 329 380 381 382 383 384 385 386 387 388 389 402 399 400 397 396 398 403 401

Part Number 7334.06B 7336.00 7336.10 7390.00B 7454.00A 7456.00A 7458.00A 7471.00 7472.00 7473.00 7476.06 7477.00 7477.02 7477.06 7478.00 7478.02 7478.06 7481.00 7482.00 7483.00 7486.00 7486.02 7486.06 7487.00 7488.00 7488.02 7700.00 7700.06 7701.00 7701.02 7701.06 7701.1ST.0000.01 7720.00 7721.00 7721.02 7721.06 7721.10 7721.40 7722.00 7735.00A 7740.00A 7745.00A 7750.00 7750.0S0.0000.00 7750.1ST.0000.00 7750.90 7750.OST.0002.00 7752.00 7752.0S0.0000.00 7752.90 7752.OST.0002.00 7755.00 7755.0S0.0000.00

Page 404 514 513 326 521 520 522 268 272 276 267 269 270 273 271 274 275 277 282 285 278 279 280 281 283 284 254 241 247 242 243 250 253 248 244 245 246 249 251 252 255 256 309 310 308 311 470 313 314 312 469 315 317

526

Part Number Index

POWERWAVE

Part Number Index

Part Number 7755.90 7755.OST.0002.00 7760.00 7760.02 7760.03 7760.06 7762.00 7765.00 7766.00 7770.00A 7772.00A 7775.00A 7780.00 7782.00 7785.00 7824.00 7840.00 7850.00B 7999.00 8110.10 8110.40 8210.40 8211.10 8211.40 8212.10 8212.10 8212.40 8220.10 8220.40 8230.10 8230.40 8510.10 8510.40 8720.0ST.B400.00 8721.0ST.B400.00 8722.0ST.B400.00 8760.0ST.B100.00 8760.0ST.B400.00 8763.0ST.0000.00 8763.0ST.B100.00 8763.0ST.B400.00 8780.0ST.0000.00 8780.0ST.B100.00 8780.0ST.B100.02 8780.0ST.B100.04 8780.0ST.B400.00 8780.0ST.B400.02 8780.0ST.B400.04 8782.0ST.0000.00 8782.0ST.B100.00 8782.0ST.B100.02 8782.0ST.B100.04 8782.0ST.B400.00

Page 316 468 301 300 302 303 305 304 306 391 392 393 320 321 322 298 395 405 511 476 474 475 479 480 477 481 478 484 483 487 486 489 490 449 450 451 456 457 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438

Part Number 8782.0ST.B400.02 8782.0ST.B400.04 8785.0ST.0000.00 8785.0ST.B100.00 8785.0ST.B100.02 8785.0ST.B100.04 8785.0ST.B400.00 8785.0ST.B400.02 8785.0ST.B400.04 ALR0062/00109 ALR1200/00209 ALR1200/90209 ALR1212/00102 ALR1212/00209 ALR2200/00209 ALR2200/90209 ALR2212/00119 ALR2212/00129 ALR2222/00109 ALR3200/00 ALR3200/00109 ALR3200/01109 ALR3200/90109 ALR3200/91109 ALR3232/51109 ALR3242/03039 ALR3246/00309 ALR4200/00209 ALR4200/01109 ALR4200/01209 ALR4600/00109 ALR4600/00119 ALR4600/00209 ALR6200/00109 ALR6212/90129 ALR6212/90139 ALS6200/00 ALT1200/00209 AM1200/05309 AR0027/50409 AR0065/00109 AR1200/05309 AR1200/95209 AR1700/80 AR1700/90209 AR1700/90409 AR1700/90419 AR1717/90609 AR2200/00109 AR2212/05209 AR2700/50209 AR2700/50409 AR2727/50609

Page 439 440 441 442 443 444 445 446 447 116 118 117 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 145 143 146 91 92 147 148 93 96 95 94 97 149 150 98 99 100

Part Number AR3400/01109 AR3400/91109 AR3434/51109 AR3700/50409 AR4200/01209 AR4600/05309 AR4640/05309 AR6500/00109 AR6512/00229 AR6512/00239 AR6517/01429 AR6517/01429 AR6517/01439 AR6517/01459 AR6522/01100 AR6522/01109 AR6522/91100 AR6560/00209 ATR1200/001xy (GSM 900) ATR1200/002xy (GSM 900) ATR1200/901xy (EGSM 900) ATR1200/902xy (EGSM 900) CEV-000-000-001 CM1000-AMPS-xxx CM1001-EGSM-xxx CM1005-DBPXBC CM1006-TBPXBC CM1007-DBPXBC-xxx CW0-000-000-003 G3L-1829-120 G3L-1929-160 G3L-2129-140 G3L-850-160 G3L-929-135 LGP121nn LGP138nn LGP141nn LGP145nn LGP146nn LGP174nn LGP175nn LGP18104 LGP18520, LGP18521 LGP185nn LGP186nn LGP192nn LGP195nn LGP213nn LGP215nn LGP219nn LGP233nn LNKA800 LNKA900

Page 151 152 153 101 154 155 156 102 104 103 105 107 106 108 109 110 111 112 158 159 160 161 82 64 65 67 68 66 80 9 10 11 7 8 56 61 71 69 70 41 42 57 43 44 45 40 72 59 46 73 60 171 174

527

Part Number Index

POWERWAVE

Part Number Index

Part Number LNKC1800 LNKC1900 LNKF100 LNKF400 LNKF800 MF0-004-000-002 MF0-048-000-001 NP50B0-22111 NP5O-11111 NPBO-11111 NWV-001 OS-0851-P0-XXX OS-0921-V0-XXX OS-0951-P0-XXX OS-1821-H0-XXX OS-1851-H0-XXX OS-1921-H0-XXX OS-1933-E0-XXX OS-1951-E0-XXX OS-1991-H0-XXX OS-2133-E0-XXX OS-2151-E0-XXX P65-15-XDHW2-ND1 P65-15-XL-2 P65-15-XL-4 P65-15-XL-R P65-15-XLH-RR P65-16-XL-2 P65-16-XL-4 P65-16-XL-6 P65-16-XL-R P65-16-XLH-RR P65-17-XDHW2-ND1 P65-17-XL-2 P65-17-XL-4 P65-17-XL-R P65-17-XLH-RR P65-18-XDHW2-ND1 P65-18-XHW2-RR P65-18-XXW2-R P65-18-XXW2-R P90-14-XL-R P90-14-XLH-RR P90-15-XL-R P90-15-XLH-RR P90-16-XL-R P90-16-XLH-RR P90-17-XXW2-R P90-17-XXW2-R RH004000/003 RH004002/001 RH100020/101 RH100020/211

Page 175 173 176 172 177 77 78 163 164 165 525 13 19 14 20 15 21 23 16 24 25 17 467 290 291 409 416 292 293 294 410 417 466 295 296 411 418 465 459 453 461 412 419 413 420 414 421 454 462 184 189 190 191

Part Number RH200020/101 RH200020/211 RH201022/101 RH201022/211 RH300020/101 RH300020/211 RH304022/03A RH304022/101 RH304022/211 RH305022/03A RH308022/03A RH309022/101 RH309022/211 RH330020/101 RH334022/101 RH400020/101 RH400020/211 RH500020/101 RH500020/211 RH600020/101 RH600020/211 RH601022/101 RH601022/211 RH602022/101 RH602022/211 RH621010 RH700030/101 RH700030/101 RH705032/101 RH770020/101 RH805022/101 RH805022/211 RH900020/101 RH900020/211 SB400-A SB400-B Tap-In TS07-AWDB111-001 TSAW-07BP111-001 TT08-19DB111-001 TT19-08BP111-001 TTAW-0000112-001 TTAW-07BP111-001 TTAW-60BW111-001 TU09-000001n-001 UA107 62/1 UA107 62/2 UA107 62/3 UA107 62/4 VersaFlex 7.0 VersaFlex 9.0

Page 192 193 194 195 196 197 222 198 199 223 224 200 201 202 203 204 205 206 207 208 209 210 211 212 213 185 182 214 215 216 217 218 219 220 168 169 180 51 47 52 53 49 48 50 54 227 228 229 230 84 85

528

P O W E R WAV E

Contact Us

Quality and Environmental Management System Certifications


ISO 9001 TL 9000 TickIT ISO 14001

Sales by Region U.S. & Canada Latin America Europe


USSales@pwav.com

Support by Region Customer Service

Customer service offered 24 hours a day

SouthAmericaSales@pwav.com EuropeSales@pwav.com

+1 888 PWR WAVE (+1 888 797 9283)

Technical Support Americas


Support@pwav.com +1 888 PWR WAVE ext. 3 (+1 888 797 9283)

Middle East & Africa Asia-Pacific

MEASales@pwav.com APACSales@pwav.com

Technical Support Asia-Pacific


TechSupportHK@pwav.com

Technical Support Europe


TechSupport@pwav.com +46 8 540 822 00

Worldwide Corporate Headquarters


1801 East St. Andrew Place Santa Ana, CA 92705 USA +1 714 466 1000 +1 714 466 5800 FAX

www.powerwave.com

About Powerwave Technologies


A global leader in end-to-end wireless coverage and capacity solutions, Powerwave Technologies, Inc. offers cutting edge wireless infrastructure to address the demands of enterprise and commercial customers. Powerwave offers a comprehensive suite of solutions, including Antennas, Base Station Solutions and Coverage Solutions. Powerwaves product line supports all wireless network protocols and frequencies including Next Generation Networks in 4G technology such as WiMAX and LTE. Powerwave solutions, products and services also help wireless operators and OEMs reduce capital and operating expenses, speed rollout of services, improve coverage and capacity, and reduce environmental impact. For more information, visit us at www.powerwave.com.

Worldwide Corporate Headquarters


1801 East St. Andrew Place Santa Ana, CA 92705 USA +1 714 466 1000 +1 714 466 5800 FAX

www.powerwave.com
Copyright 2010, Powerwave Technologies, Inc. All rights reserved. Powerwave, Powerwave Technologies, the Powerwave logo, Allgon, In-Hancer and Tap-In are registered trademarks of Powerwave Technologies, Inc. Clean Site, Connecting the Wireless World, Intellimast, InView Management System, LinkNet, MicroFlex, NetOne, NetWay, NetworkOne, Nexus, Performance Boost, PowerBoost, RapidFlex, SubTerra and VersaFlex are trademarks of Powerwave Technologies, Inc. LTE is a registered trademark of European Telecommunications Standards Institute. Other trademarks referenced are the property of their respective owners. All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08643 Rev. D 02/11

You might also like