Professional Documents
Culture Documents
Q-CAD Drafting Procedures Customer Profile Data Layering Standards CAD Symbols, Blocks, Attributes Ambiguities and Data Conflicts Undimensioned Drawings Unclear Data on Original Documents Data Conflicts Establishing CAD Standards Drawing Standards Filename - Drawing Number Layering Control Text, Dimensions, Linetype styles Blocks Polygon Layer
1. Your original paper or TIF/PDF documents are logged into the Q-CAD, Inc. office.
Microsoft Project is used to index, manage and track all documents and log each step of the conversion process. Your project's special requirements are reviewed by our staff engineers and architects. These special requirements often include: layering guidelines or standards; titleblocks; blocks, fonts; hatching; file naming conventions. A technical staff representative will contact you immediately if your project requirements are not completely understood. A CAD operator is then selected based on the project type and complexity. The operator is supplied with written detailed instructions fully describing your project.
2. The CAD operator manually scales the actual dimensions, bearings, distances and
coordinates from the original document and then draws each entity into CAD. During the conversion, each entity is placed on the appropriate AIA, LITE, Tri-Services, or CUSTOM layer, and any blocks supplied by the client are incorporated into drawing.
The result is a dimensionally accurate, full-scale, layered, AutoCAD (DWG), Revit (RVT), Architecture (DWG), or Microstation (DGN) file.
3. The CAD operator performs Level 1-QA to assure that the converted CAD file matches
the original document.
4. The CAD file enters Level 2-QA where the CAD manager plots the DWG/DGN file and
compares it to the original document for accuracy. Errors and omissions are noted and the CAD manager works with the CAD operator to assure that all errors and omissions are corrected as necessary.
5. The CAD file enters Level 3-QA where the CAD manager reviews the corrected
document for 100% accuracy. Spelling checks, layering standards, file x-refs (when applicable) are verified.
6. The CAD file enters Level 4-QA where it is visually compared to the hardcopy original
document. Additional files are created based on the final CAD file: PDF-color, PDFblack/white, TIF, CTB (color table files for client plotting). Once Level 4-QA testing is completed the files are ready to be distributed to the client.
7. The completed electronic files are written onto a CD-ROM, floppy disk or prepared
for electronic Internet FTP transfer or email. Compression: CAD files returned to the customer using email or FTP are compressed into a ".zip" format. WinZIP applications are used to compress each file for economical file transfers. For files written onto CD-ROM, the files remain uncompressed for convenient access by our users.
8. Q-CAD, Inc. creates a package to be returned to the customer. The package includes
all documents requested by the client including final electronic files on media, original hardcopies (if requested), invoice, etc. Upon request by the customer, the paper documents can be returned or destroyed. Electronic CAD files can be destroyed or archived by Q-CAD, Inc. for future needs by the client.
Backups: Q-CAD maintains electronic backups of converted CAD files over the most recent 5 years. A backup is created daily and includes: 1) project profile standards; 2) TIF images of original sheets submitted by client to be converted; 3) final CAD files; 4) any updated CAD files. Project data can be retrieved for the Customer at any time. Q-CAD Drafting Process
Layering Standards
CAD layering standards are essential to seamlessly share graphic information data throughout the CAD industry. Implementation of layers in a CAD file enables better management of visual information. The most widely used layering standards have been developed by the American Institute of Architects (AIA). Q-CAD automatically uses the AIA layering standards during the conversion of a document unless the client has supplied their own set of layering standards.
CAD layers are organized into major categories or groups. The major groups are further subdivided into minor groups. Each group represents a layer in the converted CAD file. Each layer is labeled using a consistent, easy-to-remember abbreviation. The major groups defined by the AIA include: See the complete AIA Layering Guidelines A Architectural C Civil E Electrical F Fire Protection G General H Hazardous Materials I L Interiors Landscape
For more information about the AIA CAD Layer Guidelines, please contact: Task Force on CAD Layer Guidelines C/o The American Institute of Architects 1735 New York Avenue, NW Washington, DC 20006 www.e-architect.com www.aia.org
with each order. During our conversion process, we then automatically incorporate this reference data into each CAD file. Symbol libraries, blocks and attributes are not necessary, however, they will provide added control and flexibility for your final converted documents.
Undimensioned Drawings
In cases of converting undimensioned drawings, or drawings with fewer than 20% dimensions shown on the original documents, our CAD operators perform the following heads-up digitizing procedure:
1. The document is scanned to create electronic raster TIFF image. 2. The raster image is imported into AutoCAD, Revit, Architecture (ADT), or
3. 4.
5. 6.
Microstation and appears as a background image. During the drafting process, the CAD operator uses the background as a reference to create the CAD file. The CAD operator manually draws all entities such as text, notes, title blocks, drawing titles, detail references, schedules, etc. During the conversion, the CAD operator also incorporates layering, blocks, etc. provided by the client. The CAD operator performs Level 1-QA to ensure the document matches the original. The file enters Level 2-QA where the CAD manager plots the file and compares it to the original blueprint document for accuracy. Errors and omissions are noted and the CAD manager works with the CAD operator responsible for the hand redraw to assure that all errors and omissions are corrected. The file enters Level 3-QA where the CAD manager again reviews the corrected document for quality assurance. The electronic file is transferred to Level 4-QA. The electronic file is visually compared to the hardcopy original document. Once Level 4-QA testing is completed, the files are ready to be distributed to the client.
Data Conflicts
Since, Q-CAD operators manually redraw each entity shown on the original document, occasionally a dimension shown on the original document will conflict with the measurement scaled by our operator. In such cases, the actual dimension shown on the document is used as the default. The scaled CAD dimension is shown in RED on the "README" layer. Therefore, we can ensure that all of our conversions are dimensionally correct.
Drawing Standards
Several primary conversion standards should be adhered to during the translation of paper documents into CAD. These standards include the following: Title block: Each converted sheet should use the appropriate title block, logos, and sheet borders. A title block should be created for each sheet size: A, B, C, D, E Model space: All document entities, dimensions, symbols, notes, etc. should be placed in Model Space. Q CAD recommends that all entities be drawn in Model Space. Variables: A set of present variables can be established for the document conversions to ensure consistency.
convention: Format: EJH00101.DWG Where: E=Drawing Type (such as E=Electrical) JH=Building number/name (such as Johnson Hall) 0101=Drawing sequence number (sheet number) 01=Revision number or letter
Drawing Types Architectural Base Electrical Flow Diagram Layouts Piping Fire Protection Letter B E N L P S Drawing Types Civil, Structural Furniture, Interiors Mechanical Utilities Machinery Reflected Ceiling Letter C F H M R
Layering Control
The most widely used set of layering standards was developed by the American Institute of Architects (AIA). Q-CAD automatically uses the AIA layering standards during the conversion of a document unless a different set of standards has been provided by our client. Each layer is labeled using a consistent, easy-to-remember abbreviation. The AIA Long Format consists of a single letter Major Group, a four letter Minor Group and a four letter Modifier. The major groups defined by the AIA include: See the complete AIA Layering Guidelines A Architectural C Civil E Electrical F Fire Protection G General H Hazardous Materials I Interiors L Landscape M Mechanical P Plumbing Q Equipment R Resource S Structural T Telecommunications
The colors for each layer should be consistent and all objects shall be drawn in color BYLAYER. This means that all objects assigned to a specific layer should be the same color. Occasionally, the need to create a new layer can arise in cases when custom defined, or AIA layering standards are not available. Typically, any unused drawing layers should be purged from the converted CAD document.
Example: 08ROMANS15 Where: 08=width factor=0.8=width of letter ROMANS=font 15=oblique angle (omitted when set to 0)
Text Styles 08ROMANS 0ROMANS Font File ROMANS ROMANS Width 0.8 1.0
06ROMANS
ROMANS
0.1
Blocks
Blocks are common for repetitive entities that exist on a document, such as doors, windows, toilets, etc. To ensure that all employees, contractors, and consultants use a consistent set of defined blocks, we recommend that a block legend be created. This legend should define all blocks. Blocks should be consistent among all drawings included in a set of plans or a project. For example, if a call-out block "X" is used in one drawing, it must appear as the same block "X" in all other drawings. Blocks should be created on Layer 0 and then inserted onto their correct layer in the drawing. When the block is inserted, it should be re-scaled to match the scale of the current drawing. All blocks should be listed in the drawing index, while unreferenced blocks should be purged from the drawing.
Polygon Layer
CAD documents are often used by other software applications that work with CAD files. Architects and planners often need facility data such as the area square footage of a room or a section of a building. Whereas, a structural engineer may need to find the cross-sectional area of a beam. The solution: add a polygon layer to the document. The CAD operator simply draws a closed polygon over the top of each room and over the entire building. The polygon layer then enables the export of precise information about the drawing such as room area, perimeter, location of an object, etc. that can be used with other software applications.