You are on page 1of 6

Enhance

Training Calendar
April 2012 to March 2013

Profitability
through

Training

Training programmes for Electrical and Automation professionals

Switchgear Training Centres


Pune Lucknow Coonoor

About us | Courses | Calendar | Registration | T&C |

Contacts

Powering engineers through training


The Switchgear Training Centres have been set up with an aim to impart knowledge related to the selection, application, installation, operation and maintenance of Low and Medium Voltage switchgear, control gear and allied systems. Depending on the kind of professional enrolled and course content, the programmes involve a blend of classroom sessions, practical training and case studies. These programmes offer participants an invaluable experience, thereby promoting good engineering and management practices among Electrical and Automation professionals, panel builders, project professionals and electrical consultants.

Industry professionals and customers, both benefit!


Reduced downtime Improved maintenance quality and reduced costs Enhanced product life Nominal investment with returns of enhanced productivity

Our Milestones
Celebrating over 25 years of training excellence Trained over 1,10,000 professionals Conducted over 5800 programs Enhanced productivity in over 3500 organisations

Courses
CODE PROGRAMME NAME DAYS CONTENTS FOR WHOM Tuition Fees (Rs.)
MAINTENANCE PROGRAMMES FOR ENGINEERS & SUPERVISORS (CLASSROOM & WORKSHOP BASED PROGRAMMES) LV SWITCHGEAR SELECTION & MAINTENANCE ADVANCED INTR0DUCTION TO LOW VOLTAGE SWITCHGEAR
LVSSM-A

Classroom sessions and hands-on workshop sessions on the selection, testing, operation, trouble-shooting and maintenance of Low Voltage switchgear used in motor feeders and in power feeders - like contactors, thermal overload relays, motor starters, HRC fuses, SDF Units, MCCBs, ACBs, etc. advanced motor protection with microprocessor based motor protection relays, overview of soft starters for motors, MCBs/ELCBs/distribution boards, power factor improvement and good termination practices for Low Voltage switchgear Overview of electric power generation, transmission and distribution in India, typical industrial electric power distribution scheme, classroom sessions with hands-on workshop sessions and/or workshop demonstration sessions giving exposure to a wide range of Low Voltage switchgear like contactors, overload relays, motor starters, circuit breakers, etc.

Graduate/Diploma Electrical Engineers involved in the selection, operation and maintenance of Low Voltage electrical power distribution systems in industrial / commercial / residential electrical installations

Rs. 10, 000

ILVS

Final Year/Pre-final year Degree/Diploma Students of Electrical Engineering, fresh Electrical Engineering graduates/diploma holders, degree/diploma Electrical engineers with up to 2 years of experience, EEE Department faculties of engineering colleges/polytechnic colleges

Rs. 3, 000

SELECTION & APPLICATION PROGRAMMES FOR ENGINEERS (CLASSROOM - BASED PROGRAMMES) ELECTRICAL DESIGN OF SWITCHGEAR ASSEMBLY ADVANCED DESIGN OF CONTROL CIRCUITS
REQUIREMENTS OF SYSTEM & EQUIPMENT EARTHING

EDSA-A

Good practices in the design of Low Voltage switchgear assembly, forms of seperation, selection of Low Voltage switchgear for various applications, motor feeder protection, type-2 co-ordination studies, various types of latest protection releases for LV circuit breakers. Various types of discrimination with circuit breakers, fault level calculations as applicable to Low Voltage switchgear, bus bar selection and design, selection of current transformers, cable selection, sizing of control transformers, earthing as applicable to LV switchboards, Ingress protection(IP), good termination practices, along with a hands-on case study on the above Design and development of electrical control circuits starting from motor starter circuits to ACB control circuits to DG AMF circuits and Auto-synchronisation circuits, selection of control circuit components and relevant standards Why & How of system and equipment earthing, sizing of earth conductors, generator earthing, earthing of sensitive electronic equipment, good earthing practices, measurement of earth resistance and relevant standards LV capacitors, power factor improvement - concepts, methods and advantages, APFC panels, dynamic compensation, capacitors with DG sets, harmonics in power systems and mitigation of harmonics as well as other power quality issues Basics of AC motors, understanding conventional motor starters including power and control schematics, advantages & disadvantages, soft starters for motors, basics of AC VFDs, wiring, operation and setting procedure, case studies of AC VFDs and soft starters, energy saving with AC VFDs, guidelines for commissioning, trouble-shooting and maintenance Understanding of Automation, introduction to smart relays, PLCs, system configuration, hardware details & selection, ladder diagram programming, communication protocols-MODBUS,TCP/IP etc, Basics of networking, interfacing of PLCs with third party systems (SCADA, HMI/MMI, etc.) Introduction to BMS covering concepts of EMS, lighting control, access control, HVAC and control systems Design of electric power distribution systems for large buildings, selection of equipment such as transformers, Low Voltage switchgear, distribution boards, MCBs, ELCBs, wires, etc., fault current calculations, voltage drop calculations, earthing as applicable to building electrical installations, relevant IE rules, etc. Importance of energy conservation and management, fundamental concepts of ECM, terminologies, software, energy-efficient technologies in electrical installations, Energy Conservation Act, ECBC, etc. Introduction to protective relaying, terminologies, ANSI codes, CTs, PTs, fault level calculations, relay co-ordination, feeder protection, motor protection, transformer protection, generator protection. Excludes distance protection. Various types of MV switchgear, various types and specification of MV circuit-breaker and selection parameters, fault level calculation, vacuum vs SF6 CB and its application areas, MV metal enclosed switchgear, MV panel bus bar design. Installation, testing and commissioning of MV switchgear, selection and installation of MV cables and introduction to protection of MV switchgear.

Electrical engineers working with electrical consultants, electrical panel builders, electrical projects, electrical contractors, operations and maintenance personnel, testing agencies Rs. 12, 500

DCC

Electrical engineers working with electrical consultants, electrical panel builders, electrical projects, electrical contractors, operations and maintenance personnel, testing agencies Electrical engineers working with electrical consultants, electrical panel builders, electrical projects, electrical contractors, operations and maintenance personnel, testing agencies Electrical engineers working with electrical consultants, electrical panel builders, electrical projects, electrical contractors, operations and maintenance personnel, testing agencies Electrical/Electronic/Instrumentation engineers handling drives, PLCs and other industrial automation systems/equipments Electrical/Electronic/Instrumentation engineers handling PLCs and other industrial automation systems/equipment Engineers / contractors working on electrical / automation systems in large buildings, commercial complexes, hotels, big hospitals, etc. Engineers / contractors working on electrical / automation systems in large buildings, commercial complexes, hotels, big hospitals, etc.. Electrical / Electronic / Instrumentation engineers working in design / consultancy / projects / Operation & Maintenance Electrical engineers working with electrical consultants, electrical panel builders, electrical projects, electrical contractors, operation and maintenance of electrical equipment, testing agencies, electrical utilities, electric power generation and transmission professionals Electrical engineers working with electrical consultants, electrical panel builders, electrical projects, electrical contractors, operation and maintenance of electrical equipment, testing

Rs. 6, 000 Rs. 6, 000

RSEE

RPHM

REACTIVE POWER & HARMONICS MGT. MOTOR CONTROL & AC DRIVES INDUSTRIAL AUTOMATION WITH PLCs

Rs. 7, 500 Rs. 7, 500

MCD

IAP

Rs. 7, 500 Rs. 5, 000

BMS

INTRO. TO BUILDING MANAGEMENT SYSTEMS


INTRO. TO BUILDING POWER DISTRIBUTION

BPD

Rs. 7, 500

ECM

INTRO. TO ENERGY CONSERVATION & MGT.


POWER SYSTEM PROTECTION & CONTROL INTRO. TO MEDIUM VOLTAGE SWITCHGEAR

Rs. 5, 000

PSPC

Rs. 12, 500

IMVS

Rs. 5, 000

MAINTENANCE PROGRAMMES FOR ELECTRICIANS / TECHNICIANS / OPERATORS / ENGINEERS (WORKSHOP BASED PROGRAMMES)
SMW-C

SWITCHGEAR MAINT. WORKSHOP-COMBINED BREAKER MAINTENANCE WORKSHOP - ADVANCED

Hands-on workshop sessions on testing, trouble-shooting and maintenance of Low Voltage switchgear used in motor feeders and in power feeders such as contactors, overload relays, motor starters, MCCBs, ACBs, etc.. Good termination practices to LV switchgear, fitting, setting and testing of various types of accessories / releases on circuit breakers Thorough hands-on training on complete overhauling of C-Power range of air circuit breakers, testing, setting & programming of various types of ACB releases and accessories, introduction to U-Power ACBs and accessory fitting in U-Power ACBs

Diploma / ITI / NCVT electrical technicians / supervisors working on the operation and maintenance of Low Voltage switchgear in industries, buildings and commercial electrical Diploma / ITI / NCVT electrical technicians / supervisors working on the operation and maintenance of Low Voltage switchgear in industries, buildings and commercial electrical

Rs. 10, 000

BMW - A

Rs. 7, 500

Training Calendar April 2012 to March 2013


STC- PUNE
CODE PROGRAMME NAME Apr May Jun Jul Aug Sep Oct Nov Dec Jan Feb Mar DAYS 2012 2012 2012 2012 2012 2012 2012 2012 2012 2013 2013 2013
MAINTENANCE PROGRAMMES FOR ENGINEERS & SUPERVISORS (CLASSROOM & WORKSHOP BASED PROGRAMMES)
LVSSM-A ILVS

STC- LUCKNOW
Apr May Jun Jul Aug Sep Oct Nov Dec Jan Feb Mar 2012 2012 2012 2012 2012 2012 2012 2012 2012 2013 2013 2013

STC-COONOOR
Apr May Jun Jul Aug Sep Oct Nov Dec Jan Feb Mar 2012 2012 2012 2012 2012 2012 2012 2012 2012 2013 2013 2013

LV SWITCHGEAR SELECTION & MAINTENANCE - ADV. INTR0. - LV SWITCHGEAR

5 3

16-20 21-25 11-15 9-13 23-25 28-30 18-20 2-4

6-10 1-3

3-7 10-12

8-12 26-30 17-21 21-25 11-15 18-22 3-5 14-16 26-28 2-4 25-27 25-27

16-20 7-11 25-29 16-20 27-31 17-21 15-19 19-23 17-21 7-11 18-22 9-11 2-4 6-8 4-6 20-22 6-8 3-5 21-23 3-5 2-4 4-6

4-8 18-20

2-6 9-11

7-11 18-22 23-27 6-10 10-14 15-19 26-30 2-4 13-15 2-4 1-3

3-7

21-25 2-4

4-8

11-15

24-26 29-31 14-16 26-28

25-27 25-27

SELECTION & APPLICATION PROGRAMMES FOR ENGINEERS (CLASS-ROOM BASED PROGRAMMES)


EDSA-A DCC RSEE RPHM MCD IAP BMS BPD ECM PSPC IMVS

ELECTRICAL DESIGN OF SWITCHGEAR ASSEMBLY (ADV) DESIGN OF CONTROL CIRCUITS


REQUIREMENTS OF SYSTEM & EQUIPMENT EARTHING REACTIVE POWER & HARMONICS MANAGEMENT. MOTOR CONTROL & AC DRIVES INDUSTRIAL AUTOMATION WITH PLCs INTRO. TO BUILDING MANAGEMENT SYSTEM INTRO. TO BUILDING POWER DISTRIBUTION INTRO. TO ENERGY CONSERVATION & MGT. POWER SYSTEM PROTECTION & CONTROL INTRO. TO MV SWITCHGEAR

5 3 2 3 3 3 2 3 2 5 2

9-13 14-16 16-17 18-20 25-27

18-22

20-24

8-12 29-31

10-14 14-16 7-8

18-22

14-18 7-9 28-29 25-27

23-27 1-3

24-28 3-5

26-30

14-18 21-23

11-15 9-11

14-18

9-13 2-4 5-6

24-28 29-31

5-9

21-25 2-4 28-29

4-8

19-20 16-18 13-15 16-18 19-21 25-26 27-29 3-4 28-1 16-17 1-2 12-14 3-5 3-5 6-8 10-11 12-14

19-20 21-23 9-11 2-4 3-5 6-8 15-16 17-19 5-7 26-28 28-30 20-22 18-20 2-4 6-8

9-11 4-6 28-30 2-4 9-10 11-13

1-3 27-29 30-1 17-18 19-21

14-16 10-12

25-27 11-13 14-16 14-15 11-13 17-18

18-19 14-18 3-4 6-7 10-14

3-4 4-8 25-26 23-27

11-12 4-8 30-31 20-24 8-12

10-14 30-31

18-22

MAINTENANCE PROGRAMMES FOR ELECTRICIANS / TECHNICIANS / OPERATORS / ENGINEERS (WORKSHOP BASED PROGRAMMES)
SMW-C BMW - A

SWITCHGEAR MAINTENANCE WORKSHOP-COMBINED BREAKER MAINTENANCE WORKSHOP - ADVANCED

5 5

2-6 9-13

7-11 25-29 23-27 27-31 24-28 15-19 19-23 10-14 7-11 18-22 11-15 4-8 20-24 5-9 3-7 4-8

23-27 21-25 18-22 21-25

2-6 9-13

20-24

3-7 24-28

8-12

5-9 26-30

10-14 14-18 11-15 25-29 21-25 11-15

23-27 21-25 16-20

4-8 25-29

16-20 27-31 20-24

3-7 8-12 19-23 10-14 7-11 11-15 4-8 15-19 17-21 18-22

APRIL 2012
S 1 8 15 22 29 M 2 9 16 23 30 T 3 10 17 24 W 4 11 18 25 T 5 12 19 26 F 6 13 20 27 S 7 14 21 28 6 13 20 27 7 14 21 28 S M

MAY 2012
T 1 8 15 22 29 W 2 9 16 23 30 T 3 10 17 24 31 F 4 11 18 25 S 5 12 19 26 3 10 17 24 4 11 18 25 S M

JUNE 2012
T 5 12 19 26 W 6 13 20 27 T 7 14 21 28 F 1 8 15 22 29 S 2 9 16 23 30 S 1 8 15 22 29 M 2 9 16 23 30

JULY 2012
T 3 10 17 24 31 W 4 11 18 25 T 5 12 19 26 F 6 13 20 27 S 7 14 21 28 5 12 19 26 6 13 20 27 S M

AUGUST 2012
T 7 14 21 28 W 1 8 15 22 29 T 2 9 16 23 30 F 3 10 17 24 31 S 4 11 18 25 S 30 2 9 16 23 3 M

SEPTEMBER 2012
T 4 11 18 25 W 5 12 19 26 T 6 13 20 27 F 7 14 21 28 S 1 8 15 22 29 10 17 24

OCTOBER 2012
S 7 14 21 28 M 1 8 15 22 29 T 2 9 16 23 30 W 3 10 17 24 31 T 4 11 18 25 F 5 12 19 26 S 6 13 20 27 4 11 18 25 5 12 19 26 S M

NOVEMBER 2012
T 6 13 20 27 W 7 14 21 28 T 1 8 15 22 29 F 2 9 16 23 30 S 3 10 17 24 S 30 2 9 16 23 M 31 3 10 17 24

DECEMBER 2012
T 4 11 18 25 W 5 12 19 26 T 6 13 20 27 F 7 14 21 28 S 1 8 15 22 29 6 13 20 27 7 14 21 28 S M

JANUARY 2013
T 1 8 15 22 29 W 2 9 16 23 30 T 3 10 17 24 31 F 4 11 18 25 S 5 12 19 26 3 10 17 24 4 11 18 25 S M

FEBRUARY 2013
T 5 12 19 26 W 6 13 20 27 T 7 14 21 28 F 1 8 15 22 S 2 9 16 23 S 31 3 10 17 24 4 11 18 25 M

MARCH 2013
T 5 12 19 26 W 6 13 20 27 T 7 14 21 28 F 1 8 15 22 29 S 2 9 16 23 30

Registration
How to confirm your booking
1. Email Registration Form with participant and course details to the relevant Switchgear Training Centre, along with a copy to cic@lntebg.com 2. Print out and complete the Registration Form with all approvals. 3. Attach a Demand Draft for the applicable fees drawn in favour of 'LARSEN & TOUBRO LIMITED'. The draft should be payable at Pune, Lucknow or Coimbatore (for Coonoor Centre) - depending on the Centre chosen. 4. Mail it to the concerned Switchgear Training Centre

Course Fees Terms & Conditions


Inclusions: 1. Training Fees and use of workshop facilities during the programme. 2. Transportation to the Training Centre and back from fixed pick-up points in the city at pre-arranged timings. 3. Folders, writing material and hand-outs, as required for the programme. 4. Breakfast, lunch and tea / coffee 5. All taxes and duties, including Service Tax. Exclusions: Expenses such as travel, including local conveyance up to the pick-up point, lodging and boarding

Please Note:
a) Participants will receive written confirmation of their registration, after which they should plan their journey to the Training Centre selected. b) In case seats are unavailable for the selected course, participants will be offered an opportunity to participate in the next training session for that module. c) All programmes are conducted on a 'best effort' basis. Programs are subject to cancellation or postponement due to unforeseen circumstances or lack of enrolement. d) Please ensure that all nominations are accompanied by the requisite course fees. e) Participants will be expected to make their own arrangements for lodging and boarding.

Please Note:
a) The transfer of fees for a change of participant or programme must be confirmed in writing by the Training Centre. b) Course Fees specified are valid until March 31, 2013 only c) Fees are not refundable under any circumstances.

For more information about the Training Calendar and programmes, please contact the relevant Switchgear Training Centre or Customer Interaction Centre: Switchgear Training Centres
Pune Larsen & Toubro Limited Switchgear Training Centre, T-156/157, MIDC Bhosari, Pune - 411 026 Tel: 020 2712 0037 / 2712 0653 Fax: 020 2712 2933 E-mail: STC-PUNE@LNTEBG.COM Lucknow Larsen & Toubro Limited Switchgear Training Centre, C - 6 & 7, UPSIDC P.O. Sarojininagar, Lucknow - 226 008 Tel: 0522 247 6110 / 09935563239 Fax: 0522 247 6015 E-mail: STC-LUCKNOW@LNTEBG.COM Coonoor Larsen & Toubro Limited Switchgear Training Centre, Ooty-Coonoor Main Road Yellanahalli P.O., The Nilgiris - 643 243 Tel. : 0423 251 7107 Fax : 0423 251 7158 E-mail: STC-COONOOR@LNTEBG.COM

Customer Interaction Centre (CIC)


BSNL/MTNL (Toll free): 1800 233 5858 Reliance (Toll free): 1800 200 5858 Tel: 022 6774 5858 Fax: 022 6774 5859 E-mail: cic@Lntebg.com

www.Lntebg.com

You might also like