Professional Documents
Culture Documents
Compressive Strength
Concrete is a man-made material, essentially mixed at site. The properties of concrete depend on the properties of its ingredients and their proportion, and is likely to vary from mix to mix. Tests must be conducted, therefore to ensure that the concrete used is in accordance with design specifications. A frequent test, is the test of compressive strength, in which concrete samples are tested to failure.
Safety aspects include constant monitoring and display of Front Door open / closed status Oil level in the tank. Platen travel limits When any of these safety aspects are faulted, the pump automatically stops until the problem is corrected. The display will continue to show the error while the alarm buzzer keep sounding until it is corrected. Large , colorful on-screen pace rate error bar constantly displayed during the RUN
Software Features:
An intuitive and easy to use Graphical User interface Login and Access control Online help file Multiple calibration files for different machine configuration can be stored and re-called at user will. Machine will not start unless proper calibration file is loaded. Least count of 0.01 kN from 50kN to 5000kN for all capacities
The software provide three basic tools for the operator. They are: Machine Calibration verification The user can use their certified force verification device and obtain a set of reading and verify the actual deviation from the machine calibration and generate calibration verification certificates Running and Testing the sample Running the test involve documenting the sample details and setting the configuration of the machine and other associated operating conditions like defining the sample shape, size, pace rate and failure detection levels etc.. for conducting the test. The pace rate can be modified by the user dynamically during the RUN time. Once the RUN is over, the data gets saved onto the computer hard disc automatically. The number of RUNs that can be stored is only limited by the space available on the hard disc. The screen flashes the peak load once the RUN is complete. The load is released automatically once the test is complete. The operator can hold and release the load at any point during the RUN. A manual emergency button is provided to shut off the machine in emergency. Post analysis and Report Generation Calibration Report Generation Calibration Verification Report Selective or Batch Reports, Todays Batch report or Duration batch reports Reports for individual samples with data in Graphical and / or tabular forms. The plots include, Load Vs Time Stress Vs Time Load Vs Stress Load Vs compression Compression Vs Time Stress Vs Strain Strain Vs Time All reports exportable to MS-Word, MS-Excel, Adobe pdf formats Editable header / footer information in the reports