Professional Documents
Culture Documents
TUBESHEETSt
Available in Carbon Steel. Stainless Steel. NRB, 90/10 or 70/30 CuNi or Titanium tubesheets.
TUBES
Available in Carbon Steel, Copper, 90/10 or 70/30 CuNi. Stainless Steel. Admiralty or Titanium. Tubes are roller expanded. Seal welding and grooving available. Tubes are available with la-fin enhancements.
SUPPORTS
Movable, fabricated with rod to 16"; fixed cradles over 16" diameter.
SHELLS
Available in Steel and Stainless Steel. Minimum clearances between shell and baffles reduce by-pass and maximize heat transfer.
BAFFLES
Precision punched baffles assure effective circulation by providing minimum clearances between the tubes and tube holes. Baffle cuts and spacing for each diameter are consistent with best practices.
Special Feature
The unique construction of the Basco OP permits inspection and maintenance of the tubeside without draining the shellside or disturbing the piping,
Every other bolt hole is tapped, permitting removal of channel or bonnet without disturbing retainer or internal packing REVERSING OR CHANNEL BONNET '" SHELL PIPE
.........
,\~
\
'"
//
Design Temp*
of 300 300
0 0
Shellside Tubeside
150 150 75
3000
Complies with ASMETEMA "C". AEW design. USCG. ASS and TUV approved. "Nonferrous tubesheets designed for 300F mean metal temperature.
Channels
UU
I-
:ii:1
Bonnets
Two-Pass
2.
.!!!!.
Two-Pass
Stationary
DD II DU II FU 11t1
II II II ~II
1t11
Floating
tll
The complete model designation for an 18" diameter, Type OP with a 120" tube length would be as follows:
31111
Channels
Single-Pass
DF
14
FF 11t1
Channels
Single-Pass
OP 18120-9-UU-5
t=
Stationary
Channel/Bonnet (Floating) Shell Nozzle (Orientation) Channels (Stationary) Tube Length (Inches) Diameter
sllil
91111 11111 111111
I BF I UBI.
FB DB
UF
I-:a--I
I
41111
I
1t1 I
L.-
BBI
UD
1I
FD 11t1
.1 I
I
BD BU
:II:
(Inches)
Type
-I
Steel Models
Model shown is removable tubesheet V-tube with type 304 Stainless Steel tubing. Fixed bundle models also available.
Tubesheets: 304 Stainless Steel Bonnets: Cast 304 Stainless Baffles: 304 Stainless Steel Gaskets: Compressed Fiber
Fixed or removable U-Tube bundles. HTR features non-ferrous construction while AHTR has all 316 stainless steel shell materials. Models available with ASME Code Stamp. AHTR models in 10" and 12" shell diameters have fabricated heads. Standard Materials of Construction Shell: 2"-3" Copper or SS; 4"-8" Red Brass or Stainless Steel Tubes: Copper, Admiralty or Stainless Steel Tubesheets: Forged Brass or Stainless Steel Bonnets: Cast Iron, Bronzed or Stainless Steel Baffles: Brass or SS Bolting: Alloy Steel Gaskets: Compressed Fiber
Whitlock Type HTR Heat Exchangers shown is available from 3" thru 12" in diameter and up to 96" long in fixed or removable bundles.
Brackets: Steel
_ _
Tipo de intercambiador
Material de construcci6n
Dimensiones
Temperaturas de trabajo
Presiones de trabajo
Capacidad
Aplicaciones
Comentarios