Professional Documents
Culture Documents
Heat Exchangers
ICAM (LILLE) - HEAT EXCHANGER COURSE ICAM 2 - AUTUMN 2003 Heat Exchanger Examples - Sheet 2
1. Consider a double-pipe heat exchanger: Cold fluid, water mass flow rate 4,540 kg/h heat capacity 4,180 J/kg K inlet temperature - 16 C Hot fluid, oil mass flow rate 8,050 kg/h heat capacity 2,090 J/kg K inlet temperature - 93 C outlet temperature - 66 C
If the overall coefficient of heat exchange U = 283.3 W/m2 K, calculate the surface area of the heat exchanger. Consider the possibility of using either counter-flow or parallel flow. [Ans: 8.65 m2, 9.47 m2]
2. Calculate the heat exchange surface area required in a heat exchanger comprised of tubes
with an external diameter of 25 mm in order to cool a solution of ethyl alcohol (mass flow rate: 24,948 kg/h, heat capacity: 3,804 J/kg K) from 66C to 40C using a water flow (mass flow rate: 22,680 kg/h, heat capacity: 4180 J/kg K) entering at 10C. The overall heat transfer coefficient related to the outside tube surface is 566 W/m2 K. Consider the following cases: a) Parallel flow in a double-pipe exchanger b) Counter-flow in a double-pipe exchanger c) Shell and tube heat exchanger with 2 shell-passes and 72 tube-passes. The alcohol flows in the shell and the water in the tubes. Calculate also the exchanger length. d) Cross-flow heat exchanger with both fluids making one pass. Consider the shell fluid to be "mixed". [Ans: a) 61.5 m2; b) 40.4 m2; c) 46.4 m2; d) 45.9 m2]
Given that the surface area of the heat exchanger is 300 W/m2 K and the corresponding overall heat transfer coefficient is 5 m2, find: a) The heat transfer rate b) The outlet temperatures of hot and cold fluids. [Ans: a) 76.39 kW; b) 75.8C, 68.4C]
Mike Patrick
Page 1
13/02/2013
ICAM2
Heat Exchangers
5. A preliminary design study is to be carried out on an oil-oil heat exchanger with the following specification: Cold fluid, oil mass flow rate - 64.0 t/h heat capacity 2,612 J/kg K inlet temperature - 171.5C outlet temperature - 239C Hot fluid, oil mass flow rate - 28.8 t/h heat capacity 2,612 J/kg K inlet temperature - 340C
If the overall coefficient of heat exchange U = 502 W/m2 K, a) Calculate the heat exchange surface area required for: Simple counter-flow One shell-pass, two tube-pass Two shell-pass, four tube-pass Three shell-pass, six tube-pass
Given that there is already available a one shell-pass, two tube-pass exchanger of surface area 210 m2, specify what additional arrangement of heat exchangers in series would be necessary to deliver the required performance. [Ans: a) 461 m2, no solution, 634 m2, 530 m2; b) 2 exchangers in series each of 149 m2]
b)
7. Cold water flows inside the tubes of a condenser with a flow rate of 400 kg/h and an inlet
temperature of 18C. The water is heated by the condensation of steam at a temperature of 104C. The following data is provided: Internal diameter of tubes, 12.5 mm, External diameter of tubes 16 mm, tube length 2.4 m, thermal conductivity of material of the pipe wall, 46 W/m K. For the water, the kinematic viscosity is 0.7 x 10-6 m2/s and the Prandtl number is 5.5. a) Calculate the heat transfer coefficient on the inside of the tube b) If the heat transfer coefficient on the outside of the tube is 8000 W/mK, calculate the overall heat transfer coefficient c) Calculate the number of transfer units (NTU) and the effectiveness (). d) Calculate the outlet temperature of the cold fluid.
Mike Patrick Page 2 13/02/2013
ICAM2
Heat Exchangers
8. A counter-flow, double-pipe heat exchanger is used to heat 1.25 kg/s of water from 35C to
80C by cooling an oil (heat capacity = 2.0 kJ/kg K) from 150C to 85C. The overall heat transfer coefficient is 850 W/m K. A similar installation is to be built at another location but it is desired to compare the performance of the single exchanger with two identical smaller counter-flow heat exchangers connected in series on the water side and in parallel on the oil side. The oil flow is to be split equally between the two exchangers and it may be assumed that the overall heat transfer coefficient for the smaller exchangers is the same as that for the larger one. If the smaller exchangers cost 20 per cent more per unit surface area than the bigger ones, comment on the economics of the choice between the two systems. [Single exchanger area 4.65 m, area of each smaller exchanger 2.47 m]
9. A run-around coil heat recovery system is used for a laboratory in which the presence of
bacteria rules out any possibility of air re-circulation or a direct recuperative heat exchanger. Air enters the room via a supplementary heater at 24C and leaves at 20C. The outside air temperature is 5C. If the mass flow rate of air is 2 kg/s, mean heat capacity of air (constant pressure) is 1.005 kJ/kg K, (UA)H = (UA)C = 4 kW/K, and the heat capacity (constant pressure) of the secondary fluid is 2.5 kJ/kg K, calculate: (a) the required mass flow of the secondary fluid (b) the temperature of the air leaving the system (c) the percentage energy saving obtained by using the run-around coil. [Ans: a) 0.804 kg/s; b) 12.5C; c) 39.5%]
10. As part of an energy-saving initiative, a corrosive gas at a flow rate of 30 kg/s, ejected from
a process at a temperature of 300C, is to be used to heat 20 kg/s of water, entering the process at 10C, by means of a run-around coil. Using the data given below, calculate: (a) the mass flow rate of secondary fluid required (b) the effectiveness of the overall heat transfer process (c) the exit temperature of the water from the run-around system (d) the operating temperature range of the secondary fluid. Data: Mean heat capacities (constant pressure) (UA) values gas water secondary fluid gas to secondary fluid heat exchanger secondary fluid to water heat exchanger 1.2 kJ/kg K 4.2 KJ/kg K 3.8 kJ/kg K 40 kW/K 200 kW/K
Mike Patrick
Page 3
13/02/2013