You are on page 1of 5

Name of work : ACOUSTIC TREATMENT, AUDITORIUM LIGHTING & ELECTRIFICATION WORK AND SOUND SYSTEM OF AUDITORIUM AT GUNADHAR ADARSHA

VIDYAPITH, KHANCHI, EAST-MIDNAPUR. - - - - REVISED ESTIMATE SL. No. Description of Item. Qty. Unit Rate (Rs.) Amount (Rs.)

A. ACOUSTIC TREATMENT WORK 01.a. SIDE & BACK WALLS Lower part side wall Acoustic Treatment with Interior decoration. Providing, Fitting and Fixing of wall panel up-to average height 1 M. from floor level (i.e. 5 scatting level from floor) up-to upper level acoustic treatment. G.I. frame work to be fixed on wall. There after Glass Wool 50 mm thick having density of 16 Kgs. tie up by Galvanized wire mesh and galvanized wire to avoid sagging of glass wool. On top of GI frame filled up by glass wool 6 mm. thick Shera Roco board to be fixed. 75 x 12 mm teak wood molded planks to be fixed between the joint area of plank and gypsum board area. To match aesthetic decor and functional activities. This run of wooden panel to be provided on both side and back wall of the hall. Design of wall to be made for popper sound reproduction.

90

Sqm.

1,600.00

144,000.00

01.b. 2nd Tirer Acoustic Treatment and Interior 200 Decoration. Providing, Fitting and fixing of wall panel of 2.8 M (Approx) height from 1M height treatment G.I frame work same as lower part with ant termite paint to be fixed on wall. Thereafter Glass wool of 50 mm thick having density of 16Kgs. tie up with Galvanized wire mesh and Galvanized wire, to avoid sagging of glass wool. On top Gypsum board of 12.5 mm. thick with 15% perforated and fully perforated type as per requirement with special primer and two coats paint finish to maintain the functional activities & aesthetic decor of the hall. This kinds of treatment to be provided on both side wall of the Hall. Design of wall to be made for popper sound reproduction. 01.c. Providing, Fitting and fixing of wall panel by providing G.I frame work same as lower part to be fixed on wall. Thereafter Glass wool of 50 mm thick having density of 16Kgs. tie up with Galvanized wire mesh and Galvanized wire, to avoid sagging of glass wool. On top provide Fabric panel. 50

Sqm.

1,550.00

310,000.00

Sqm.

3,500.00

175,000.00

BACK SIDE WALL Providing, Fitting and Fixing of wall panel up to ceiling height except door area. G.I frame work same as side wall to be fixed on wall. There after Glass Wool 50 mm thick having density of 16 Kgs. tie up by Galvanized wire mesh and galvanized wire to avoid sagging of glass wool. Above this up to ceiling level on top of Glass wool provide fully perforated Gypsum board of 12.5 mm. thick with special primer and two coats paint finish. Design of wall to be made for popper sound reproduction and to match aesthetic decor and functional activities.

35

Sqm.

1,600.00

56,000.00

THREE SIDE WALL ON STAGE PORTION. 100 Acoustic Treatment and Interior Decoration on stage side wall Providing, fitting and fixing of wall panel up to ceiling height from floor level. G.I frame work same as side wall to be fixed on wall to be fixed on wall. There after Glass Wool 50 mm thick having density of 16 Kgs. tie up with by Galvanized wire mesh and galvanized wire to avoid sagging of glass wool. On top of wooden frame filled up by glass wool provide 12.5 mm. thick 15% perforated and fully perforated Gypsum board with special primer and two coats paint finish. Design of wall to be made for popper sound reproduction. CEILING HALL PORTION. 470 Auditorium ceiling Acoustic Treatment with Interior Decoration. Providing and fixing false ceiling which includes providing and fixing of G.I. frame work to be fixed on ceiling area with a channel section at 298 mm. centre to center align for flatness. Glass Wool 50 mm thick having density of 16 Kgs. tie up with by galvanized wire to avoid sagging of glass wool, 12.5 mm. thick semi perforated or fully perforated Gypsum board / meneral fiber board and border using plain gypsum board to be fixed as per requirement finish with special primer & two coats of paint. Design of ceiling to be made for popper sound reproduction. CEILING STAGE PORTION 70 Stage ceiling Acoustic Treatment with Interior Decoration. Providing and fixing false ceiling which includes providing and fixing of T - grid frame work with 15 mm thick mineral fiber board of 595 x595 to be made for popper sound reproduction.

Sqm.

1200

120,000.00

Sqm.

1600

752,000.00

Sqm.

1300

91,000.00

Providing and fixing of door size 2.1 x 1.2 including frame work of Sal wood of 125mm x 75mm with shutter made of 6mm BWR Ply wood and 3mm teak with frame work and acousticaly treated finally finish with polish. Mislenious civil work in green room, dismantling of all doors and blocking 4 Nos. doors by bricks wall painting of steel window etc.

Set

18,000.00

90,000.00

Job

75,000.00

75,000.00

Sub Total of A B 1 3 4 5 6 7 In- housing Lighting System for Auditorium. Fancy round PL light fittings of 2 x 18 watts PL fittings with Philips blast. Exit light fittings for all doors. Ceiling/ wall mounted type fancy LED light fittings of 6 watts. Ceiling mounted type LED light fittings for cove ceiling area. Wall mounted type foot/ chair light fittings. Ceiling mounted type decorative Dome light comprising with glass covers, lamp holder, reflector, earthing terminals suitable for min. 18 watts lamp for lobby. Wall mounted type tube fittings of 36watts light fittings with blast etc. of Philips make. Ceiling mounted type 48 / 42 1200 R.P.M fan of ISI approved brand for hall with fixing bracket as per requirement. Wall mounted type 16" Cabin fan of ISI approved brand for hall. Ring mounted type 230 volt A.C. single phase 50 cycles 300 mm. dia Exhaust fan of ISI approved brand for hall. Supply and laying of Cu cable for all above mentioned light fittings of required sizes of Havels/ Finolex make. Earthing system with 2 No. earth pit. 40 5 30 60 20 4 Nos. Nos. Nos. M Nos. Nos. 2000 500.00 1000.00 600.00 500 2,500.00

18,13,000.00 80,000.00 2,500.00 30,000.00 36,000.00 10,000.00 10,000.00

8 9

10 25

Nos, Nos.

850.00 2,300.00

8,500.00 57,500.00

10 11

4 10

Nos. Nos.

2,200.00 1,500.00

8,800.00 15,000.00

12

Job.

60,000.00

60,000.00

13

Job.

10,000.00

10,000.00

14

Distribution panel/board suitable for flush mounted type made of 14 SWG sheet with MS angles channels suitable sizes, gasket, properly painted with anticorrosive primer and paints, comprising the following: a) 3 phase indicator panel with Ammeter & Voltmeter panel for 3 phase. b) MCB & individual switch panel for each ckt. c) 200 Amps. 3 phase main switch (Havels or approved brand) - 1 No. b) 200 Amps. 3 phase Bas bar with Cu. conductor (approved brand) - 1 No. c) 100 Amps. 3 phase main switches (Havels or approved brand) - 1 Nos. d) 63 Amps. 3 phase main switches (Havels or approved brand) - 2 Nos. e) Generator change over switch 200 Amps. (Havels or approved brand) - 1 No.

Set.

85,000.00

85,000.00

15

Auditorium front fascia and outside lights 450 watts metal halide of Philips make with all fixing accessories excluding light pole.

Nos.

9,500.00

28,500.00

Sub Total of B C. 1 2 3 4 5 6 7 Sound Reinforcement System. Dual channel Power Amplifier similar to model XLS1500 of CROWN make. Dual channel Power Amplifier similar to model XLS 1000 of CROWN make. Professional stereo mixing console of 12 channel with phantom power make Sound Craft. Professional DVD player. Professional Graphic equalizer 31+31 band 1/3 octave of dBx. 2 way Main speaker system of 1000 W peak power capacity similar to JRX 115 of JBL. Professional Sub-woofer type loud speaker system with 1 No. 18 L.F driver of 500 W continuous power rating similar to JRX118S of JBL. 2 way monitor speaker system of 250 W power capacity, similar to JRX12M of JBL Professional Cardiod moving coil dynamic microphone model SM-58 of SHURE Mexico make. Professional Cardiod moving coil dynamic microphone model SM-57 of SHURE Mexico make. Professional Goose neck type microphone of Ahuja make. 1 2 1 1 1 6 2 Nos. Nos. Nos. No. Set Nos. Nos. 38,000.00 32,000.00 60,000.00 4,500.00 18,000.00 22,000.00 32,000.00

441,800.00

38,000.00 64,000.00 60,000.00 4,500.00 18,000.00 132,000.00 64,000.00

Nos.

18,000.00

36,000.00

Nos.

7,000.00

28,000.00

10

Nos.

4,200.00

12,600.00

13

Nos.

4,500.00

4,500.00

14 15

16 17 18

Cordless handheld type microphones with receiver unit Shure make. Amplifier Rack made of MS., front & rear lockable door with side ventilation path and paint finished, having following facilities with internal wiring & electronics circuit. a) Provisions for housing of all Amplifiers, Deck, Cordless receiver unit. b) Drawer for housing of 12 channel mixing console. This drawer will be utilized as operators table for operation during program. c) Mains panel consisting of 1 No. mains switch /MCB,1No. Voltmeter, 1 No. Ammeter, Bus bar for all amplifiers, mixer etc. d) Stabilizers for providing necessary stabilized power supply as per requirement Chromium plated microphone stand table type. Chromium plated microphone stand floor type. 36/0.2 mm 2 core PVC insulated twin twisted copper cable for speaker, 14/0.2 mm 2core screened cable for microphone cord and connector etc. (A+B+C+)=

1 1

Nos. Set

12,500.00 25,000.00

12,500.00 25,000.00

2 5 1

No. Nos. Job

850.00 1,200.00 35,000.00

1,700.00 6,000.00 35,000.00

Sub Total of C TOTAL

541,800.00

2,796,600.00

Rupees Twenty Seven Lakh Ninety Six Thousand Six Hundred only.

You might also like