You are on page 1of 15

2

Ferrules, Fittings & Konik Instruments Kits

FERRULES, FITTINGS & KONIK INSTRUMENTS KITS


FERRULES
KONIK provides a wide range of ferrules made from Vespel, Vespel/Graphite, Graphite and PTFE. Ferrule sizes refer to the size of the ttings into which they t; they are not the diameter of the ferrule. For example, 1/16 ferrules are 1/8 diameter and t in 1/16 ttings.

Vespel Ferrules - Sold in packages of 10


KONIK Ferrules Upper temperature limit: 350C 100% high temperature DuPont polyimide Precision-drilled ID; no imperfections from molding One-piece design requires no back ferrules Fairly hard; tends to seal permanently to the column Description Straight Ferrules - for tubing with ODs as listed 1/16 Ferrules 1/8 Ferrules 1/4 Ferrules Blank Ferrules - no holes 1/16 Blank Ferrules 1/8 Blank Ferrules 1/4 Blank Ferrules Capillary Column Ferrules 1/16 to 0.3 mm 1/16 to 0.4 mm 1/16 to 0.5 mm 1/16 to 0.8 mm 1/16 to 1.0 mm 1/16 to 1.2 mm 1/16, two-hole, 0.4 mm each 1/16, two-hole, 0.5 mm each 1/16 Vespel Ferrules: Blank, 0.5 mm ID, Straight Reducing Ferrules 1/8 to 0.4 mm 1/8 to 0.5 mm 1/8 to 0.8 mm 1/8, two-hole, 0.5 mm each For Capillary Sizes - ID 0.10 - 0.18 mm 0.25 mm 0.32 mm 0.53 mm 0.65 mm 0.75 mm 0.25 mm 0.32 mm Item No.

AUC212100 AUC212200 AUC212400

Vespel Ferrules

AUC2121XX AUC2122XX AUC2124XX

AUC212103 AUC212104 AUC212105 AUC212108 AUC212110 AUC212112 AUC212124 AUC212125

0.25 mm 0.32 mm 0.53 mm 0.32 mm For Capillary Sizes - OD 1/16 1/16 1/8

AUC212204 AUC212205 AUC212208 AUC212222

1/8 to 1/16 1/4 to 1/16 1/4 to 1/8

AUC212210 AUC212410 AUC212420

AUC212104, AUC212100, AUC212222

Please note for all ferrules: 0.4 mm ID ferrules t 0.25 mm ID capillary columns 0.5 mm ID ferrules t 0.32 mm ID capillary columns 0.8 mm ID ferrules t 0.53 mm ID capillary columns Straight ferrules are used for packed columns

Cap. 2: 2

Konik-Tech

FERRULES, FITTINGS & KONIK INSTRUMENTS KITS


Graphite Ferrules - Sold in packages of 10; except as noted
Upper temperature limit: 450C High-purity Graphite; preferred for capillary GC use Ideal for glass-to-metal connections; does not stick to glass Precision formed; ash free ID Reusable if not overtightened One-piece design requires no back ferrule Description Straight Ferrules - for tubing with ODs listed 1/16 Ferrules 1/8 Ferrules 1/4 Ferrules 3/8 Ferrules 1/2 Ferrules, 5/pk 3/4 Ferrules, 5/pk Blank Ferrules - no holes 1/16 Blank Ferrules 1/8 Blank Ferrules 1/4 Blank Ferrules Capillary Column Ferrules 1/16 to 0.4 mm 1/16 to 0.5 mm 1/16 to 0.8 mm 1/16 to 1.0 mm 1/16 to 1.2 mm 1/16, two-hole, 0.5 mm each For Capillary Sizes - ID 0.25 mm 0.32 mm 0.53 mm 0.65 mm 0.75 mm 0.32 mm For Capillary Sizes - OD 1/16 Item No. Graphite Ferrules AUC211100 AUC211200 AUC211400 AUC211600 AUC211800 AUC211120

AUC2111XX AUC2112XX AUC2114XX

AUC211104 AUC211105 AUC211108 AUC211110 AUC211112 AUC211125

1/16 Graphite Ferrules: Blank, 0.5 mm ID, Straight

1/16 to 1/16 straight ferrule

AUC211170

Ferrule Remover Set


These are eective tools for removing ferrules.The threaded end locks in the ferrule hole to allow removal from the tting. Two tools are supplied for ferrules from 0.4 mm to 0.8 mm ID. Description Ferrule Remover Set Item No. AUC205315 AUC205315

www.konik-group.com

Cap. 2: 3

FERRULES, FITTINGS & KONIK INSTRUMENTS KITS


Graphite Ferrules - Sold in packages of 10; except where noted
Upper temperature limit: 450C High-purity Graphite; preferred for capillary GC use Ideal for glass-to-metal connections; does not stick to glass Precision-formed; ash free ID Reusable if not overtightened One-piece design requires no back ferrule Description Reducing Ferrules 1/8 to 0.4 mm 1/8 to 0.5 mm 1/8 to 0.8 mm 1/8, two-hole, 0.5 mm each 1/4 to 0.5 mm 1/4 to 0.8 mm For Capillary Sizes - ID 0.25 mm 0.32 mm 0.53 mm 0.32 mm 0.32 mm 0.53 mm For Capillary Sizes - OD 1/16 4 mm 6 mm 1/16 1/8 Item No.

AUC211410

AUC211204 AUC211205 AUC211208 AUC211222 AUC211405 AUC211408

1/8 to 1/16 1/4 to 4 mm 1/4 to 6 mm 1/4 to 1/8 1/4 to 1/8

AUC211210 AUC211440 AUC211406 AUC211410 AUC211420

Cap. 2: 4

Konik-Tech

FERRULES, FITTINGS & KONIK INSTRUMENTS KITS


Vespel/Graphite Ferrules - Sold in packages of 10; except as noted
Upper temperature limit: 400C Made from quality DuPont polyimide/graphite blend Recommended for GC/MS interface applications One-piece design requires no back ferrule Precision drilled ID Description Straight Ferrules - for tubing with ODs as listed 1/16 Ferrules 1/8 Ferrules 1/4 Ferrules 1/2 Ferrules, 5/pk Blank Ferrules - no holes 1/16 Blank Ferrules 1/8 Blank Ferrules 1/4 Blank Ferrules Capillary Column Ferrules 1/16 to 0.3 mm 1/16 to 0.4 mm 1/16 to 0.5 mm 1/16 to 0.8 mm 1/16 to 1.0 mm 1/16, two-hole, 0.4 mm each 1/16, two-hole, 0.5 mm each Reducing Ferrules 1/8 to 0.4 mm 1/8 to 0.5 mm 1/8 to 0.8 mm 1/8, two-hole, 0.5 mm each 1/8, two-hole, 0.8 mm each 1/4 to 0.4 mm 1/4 to 0.5 mm 1/4 to 0.8 mm For Capillary Size - ID 0.25 mm 0.32 mm 0.53 mm 0.65 mm 0.25 mm 0.32 mm AUC213103 AUC213104 AUC213105 AUC213108 AUC213110 AUC213124 AUC213125 Item No. Vespel/Graphite Ferrules

AUC213100 AUC213200 AUC213400 AUC213800

AUC2131XX AUC2132XX AUC2134XX

1/16 Vespel/Graphite Ferrules: Blank, 0.5 mm ID, Straight

0.25 mm 0.32 mm 0.53 mm 0.32 mm 0.53 mm 0.25 mm 0.32 mm 0.53 mm For Capillary Sizes - OD 1/16 1/16 6 mm 1/8

AUC213204 AUC213205 AUC213208 AUC213222 AUC213228 AUC213404 AUC213405 AUC213408

1/8 to 1/16 1/4 to 1/16 1/4 to 6 mm 1/4 to 1/8

AUC213210 AUC213410 AUC213406 AUC213420 AUC213200

www.konik-group.com

Cap. 2: 5

FERRULES, FITTINGS & KONIK INSTRUMENTS KITS


PTFE Ferrules - Sold in packages of 10
Upper temperature limit: 250C 100% PTFE; completely inert One-piece design requires no back ferrule Description Straight Ferrules - for tubing with ODs as listed 1/16 Ferrules 1/8 Ferrules 3/16 Ferrules 1/4 Ferrules Blank Ferrules - no holes 1/16 Blank Ferrules 1/8 Blank Ferrules 1/4 Blank Ferrules Capillary Column Ferrules 1/16 to 0.3 mm 1/16 to 0.4 mm 1/16 to 0.5 mm 1/16 to 0.8 mm 1/16 to 1.0 mm 1/16 to 1.2 mm Reducing Ferrules 1/8 to 0.4 mm 1/8 to 0.5 mm 1/8 to 0.8 mm For Capillary Sizes - ID 0.25 mm 0.32 mm 0.53 mm 0.65 mm 0.75 mm AUC214103 AUC214104 AUC214105 AUC214108 AUC214110 AUC214112 Item No.

AUC214100 AUC214200 AUC214300 AUC214400

PTFE Ferrules

AUC2141XX AUC2142XX AUC2144XX

AUC2144XX

0.25 mm 0.32 mm 0.53 mm For Capillary Sizes - OD 1/16 6 mm 1/16 1/8 3/16

AUC214204 AUC214205 AUC214208

1/8 to 1/16 1/4 to 6 mm 1/4 to 1/16 1/4 to 1/8 1/4 to 3/16

AUC214210 AUC214406 AUC214410 AUC214420 AUC214430

Cap. 2: 6

Konik-Tech

FERRULES, FITTINGS & KONIK INSTRUMENTS KITS


FITTINGS
Swagelok Fittings
KONIK carries a full line of quality Swagelok ttings for GC and HPLC. Please call if you do not see the size you need. When ordering Swagelok ttings, prex the catalog number with one of the following letters: B for brass, SS for stainless steel. For example, a 1/4 OD tube union in stainless steel is part number FASSS-400-6. FAS202-1 Description Nut Size 1/16 1/8 1/4 1/16 1/8 1/4 1/16 1/8 1/4 1/16 1/8 1/4 1/16 1/8 1/4 1/16 to 1/16 1/8 to 1/8 1/4 to 1/4 1/16 to 1/8 1/16 to 1/4 1/8 to 1/4 1/16 x 1/16 x 1/16 1/8 x 1/8 x 1/8 1/4 x 1/4 x 1/4 1/16 to 1/16 NPT 1/8 to 1/8 NPT 1/4 to 1/4 NPT 1/16 to 1/8 NPT 1/8 to 1/16 NPT 1/4 to 1/8 NPT 1/8 to 1/4 NPT 1/8 to 1/8 NPT 1/8 to 1/4 NPT 1/4 to 1/8 NPT 1/4 to 1/4 NPT 1/16 to 1/8 tube 1/8 to 1/4 tube 1/4 to 1/8 tube Item No. FAS102-1 FAS202-1 FAS402-1 FAS103-1 FAS203-1 FAS403-1 FAS104-1 FAS204-1 FAS404-1 FAS100-C FAS200-C FAS400-C FAS100-P FAS200-P FAS400-P FAS100-6 FAS200-6 FAS400-6 FAS200-6-1 FAS400-6-1 FAS400-6-2 FAS100-3 FAS200-3 FAS400-3 FAS100-1-1 FAS200-1-2 FAS400-1-4 FAS100-1-2 FAS200-1-1 FAS400-1-2 FAS200-1-4 FAS200-7-2 FAS200-7-4 FAS400-7-2 FAS400-7-4 FAS100-R-2 FAS200-R-2 FAS400-R-2

FAS203-1

Front Ferrule

FAS204-1

Back Ferrule

Cap

FAS200-C

Plug

Unions

FAS200-P

Reducing Unions

FAS200-6

Union Tees

Male Connector

FAS200-6BT

FAS200-3

Female Connector

Reducers

FAS200-1-2

FAS200-7-4

FAS200-R-4

www.konik-group.com

Cap. 2: 7

FERRULES, FITTINGS & KONIK INSTRUMENTS KITS


Valco Fittings
Valco Nuts
AWVZN.5 All standard nuts are labeled with the letters ZN. They can be used with Valco ttings as well as most other manufacturers. The longer nut is used when the tting head may not be accessible or may interfere with adjacent ttings, as on some Valco mutiposition valves. Nuts are made from stainless steel. Description Standard Nut Standard Nut Long Nut Standard Nut Note: -10 Indicates pk10, -5 Indicates pk5. AWVZN2 Size 1/32 1/16 1/16 1/8 Item No. AWVZN.5-10 AWVZN1-10 AWVLZN1-10 AWVZN2-10

AWVZN1

AWVLZN1

Valco Ferrules
AWVZF.5 Valco ferrules may be used with all Valco ttings and those of most other manufacturers. Ferrules made of stainless steel can be used with metal or PTFE tubing. The polyimide ferrules can be used up to 350C. Glass-lled PTFE ferrules can be used on metal or glass tubing if the temperature is less than 200C or 125C with PTFE tubing. Description Ferrule Ferrule AWVZF2 Ferrule Size 1/32 1/32 1/16 1/16 1/16 1/8 1/8 Material 300 Series Stainless Polyimide 300 Series Stainless PTFE Polyimide 300 Series Stainless Polyimide Item No. AWVZF.5-10 AWVZF.5V-5 AWVZF1-10 AWVZF1TFG-10 AWVZF1V-5 AWVZF2-10 AWVZF2V-5

AWVZF1

Note: -10 Indicates pk10, -5 Indicates pk5. AWVZU.5

Valco Unions
AWVZU1 These join two tubes of uniform bore, without introducing unswept or dead volume. Nuts and ferrules included. Made from stainless steel. Description Union AWVZRU1.5 Union Size 1/32 1/32 1/16 1/16 1/16 1/16 to 1/32 1/16 to 1/32 1/8 1/8 1/8 1/8 to 1/16 1/8 to 1/16 1/8 to 1/16 1/8 to 1/32 1/8 to 1/32 Bore 0.25 mm (.010) 0.8 mm (1/32) 0.75 mm (.029) 0.25 mm (.010) 1/16 0.25 mm (.010) 0.8 mm (1/32) 0.75 mm (.029) 2 mm (.080) 1/8 0.75 mm (.029) 0.25 mm (.010) 1/16 0.25 mm (.010) 0.8 mm (1/32) Item No. AWVZU.5 AWVZU.5T AWVZU1 AWVZU1C AWVZU1T AWVZRU1.5 AWVZRU1.5T AWVZU2 AWVZU2L AWVZU2T AWVZRU21 AWVZRU21C AWVZRU21T AWVZRU2.5 AWVZRU2.5T

Reducing Union AWVZU2 Union

Reducing Union

AWVZRU21

Reducing Union

AWVZRU2.5

Cap. 2: 8

Konik-Tech

FERRULES, FITTINGS & KONIK INSTRUMENTS KITS


KONIK INSTRUMENTS INSTALLATION KITS
The Installation KITS supplied with each instruments (GC, LC, MS or Autosampler), contain enough consumable items for the installation and immediate use of the system. KONIK HRGC Installation Kits KONIK HPLC Installation Kit KONIK ROBOKROM AUTOSAMPLER Installation Kits KONIK LC-GC K2 Installation Kit

Konik HRGC Installation Kits


Capillary column Installation Kit Contains: Description Capillary column KAP-5 15m x 0.25mm x 0.25um Polypropylene Tube 30 m 10l Syringe Swagelok brass T 1/8 Nut brass 1/8 Back front ferrule brass 1/8 Swagelok female cap1/8 Swagelok male cap 1/8 Swagelok Union male-male 1/8 Reducer DET/INY 1/16M - 1/8F Graphite Ferrule 0.5(10u) Graphite Ferrule 0.8(10u) Fixed key 1/4 - 5/16 Combined key 7/16 SS Extractor Multiuse Blue Septa (PK100) Column Scribes KNK-5000BCCINS

Item n KAP-120212 31POL0108030 ACH80300 30SWL08MTE/0 30SWL08/T000 30SWL08/F000 30SWL08H00/0 30SWL08M000/ 30SWL08M08M/ GC4102ACOLD/I-0 AUC211105 AUC211108 29FIJ104516/ 29COM716000/ 29KNK00EXT/0 AUC234905 KNK-COL-CUT

Qty. 1 1 1 3 10 10 2 1 1 2 1 1 2 2 1 1 1

HRGC 5000B

Note: You can order also Capillary column installation kit without column KNK-5000BCINS.

KNK-5000BCCINS

www.konik-group.com

Cap. 2: 9

FERRULES, FITTINGS & KONIK INSTRUMENTS KITS


Packed column Installation Kit Contains: Description Col. OV101SE-30/Chromosorb 2 m Col. SS Mol. Sieve 5A 80/100 mesh 18 2 m Polypropylene Tube 30 m 10l Syringe Swagelok brass T 1/8 Nut brass 1/8 Back front ferrule brass 1/8 Swagelok female cap1/8 Swagelok male cap 1/8 Swagelok Union male-male 1/8 Fixed key 1/4 - 5/16 Combined key 7/16 SS Extractor Multiuse Blue Septa (PK100) KNK-5000BCPINS1/2

Item n KNK-SS2-KIT1 KNK-SS2-KIT2 31POL0108030 ACH80300 30SWL08MTE/0 30SWL08/T000 30SWL08/F000 30SWL08H00/0 30SWL08M000/ 30SWL08M08M/ 29FIJ104516/ 29COM716000/ 29KNK00EXT/0 AUC234905

Qty. 1 1 1 1 3 10 10 2 1 1 2 2 1 1

Capillay column Kit Contains: Description Reducer DET/INY 1/16M - 1/8F Graphite Ferrule 0.5(10u) Column Scribes

KNK-5000BCCIK

Item n GC4102ACOLD/I-0 AUC211105 KNK-COL-CUT

Qty. 2 1 1

Monovial Head Space Installation Kit Contains: Description Allen key 2.5 mm 20 ml vial (PK125) Al cap 20 mm (PK125) Chlorbutyl/PTFE septum 20 mm (PK125) 20 mm Manual Crimper T Brass 1/8" Nut Brass 1/8" Back and front ferrule Brass 1/8in Ppolypropylene tubing 1/8in (1m)

KNK-419-318

KNK-5000BCCIK

Item n 29ALL0025/00 KNK-V00-200 KNK-TAL-200 KNK-S01-200 AUC320990 30SWL08MTE/0 30SWL08/T000 30SWL08/F000 31POL0108001

Qty. 1 1 1 1 1 3 10 10 5

Cap. 2: 10

Konik-Tech

FERRULES, FITTINGS & KONIK INSTRUMENTS KITS


KONIK HPLC Installation Kit
HPLC 560/600 system Installation Kit Contains: Description Fast coupling Konik Kwik-Snap (pk2) HPLC COL. KONIK EXCEL 120 ODS B, 5um 15 cm x 0.4 cm Teflon joints (pk10) Guard column cartridge C18 (pk5) KEL-F Ferrule 1/8 PEEK Nut 1/8, 1/4-28 threads SS Ferrule 1/16 SS Nut 1/16, 10-32 threads PEEK One-Piece Handtight Nut 1/16, 10-32 SS Tubing OD 1/16 x ID 0.25 mm, 0.2 m Open End Wrench 8-10 mm Open End Wrench 7-5,5 mm Hexagon socket screw key SS 3 mm Open End Wrench 13-17 mm PTFE Tubing OD 2.1mm x ID 1.5 mm, 1 m Tub cutting 1/16 OD Valco Nut INOX 1/16in pk10 Valco connector 1/16 pk10 Tub INOX 316 1/16x ID 0.25 mm, 3 m Fixed key 1/4 - 5/16 100 l Syringe KNK-069-900

Item n KKS-029-000 KKS-015697 KKS-015324 KKS-015326 ACE00000470 ACE00000450 ACE00000080 ACE00000120 ACE00000121 ACE990215 ACE990383 ACE990403 ACE07700 ACE990392 ACES1810-20 29KNKTUBCUT/ AWVZF1-10 AWVZN1-10 31INX1625/00 29FIJ04516/ ACH80665

Qty. 1 1 1 1 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1

KONIK HPLC 560

KONIK HPLC 600

www.konik-group.com

Cap. 2: 11

FERRULES, FITTINGS & KONIK INSTRUMENTS KITS


Konik Robokrom Autosampler Installation Kits
Installation kit General Contains: Description Allen key 1.5 mm Allen key 2.5 mm Allen key 3 mm KNK-415-310 Installation kit GC Contains: Description Top syringe adapter 10 l Bottom syringe adapter 5 l, 10 l 10 l Syringe 10 ml Screwtop vial (pk10) 18 mm Metallic Screw Cap (pk10) 18 mm PTFE/Silicone Seal (pk10) KNK-415-310 KNK-415-300

Item n 29ALL0015/00 29ALL0025/00 29ALL0030/00

Qty. 1 1 1

Item n AS5147ADAP010-0 AS5148ADAP--A-0 ACH80300 ADC10-HSV ADC18-MSC ADC18-ST-101

Qty. 1 1 1 1 1 1

Installation kit LC Contains: Description Bottom syringe adapter 0.5, 1, 25,100 i 500 l Top syringe adapter 100 l 100 l Syringe 10 ml Screwtop vial (pk10) 18 mm Metallic Screw Cap (pk10) 18 mm PTFE/Silicone Seal (pk10) Fixed Key 1/4"-5/16"

KNK-415-320

KNK-415-310

Item n AS5148ADAP--B-0 AS5147ADAP100-0 ACH80665 ADC10-HSV ADC18-MSC ADC18-ST-101 29FIJ04516/

Qty. 1 1 1 1 1 1 1

Installation kit Head Space Contains: Description HS needle support complete Swagelok brass T 1/8 Nut brass 1/8 Back front ferrule brass 1/8 Swagelok Union male-male 1/16 Polypropylene Tube 1/8 1 m

KNK-415-330

Item n AS5148AGHS----1 30SWL08MTE/0 30SWL08/T000 30SWL08/F000 30SWL16M16M/ 31POL0108001

Qty. 1 1 10 10 1 5

Installation kit Purge&Trap Contains: Description P&T/TD needle support complete Swagelok brass T 1/8 Nut brass 1/8 Back front ferrule brass 1/8 Swagelok Union male-male 1/16 Polypropylene Tube 1/8 1 m Tenax Trap

KNK-415-340

KNK-415-330

Item n AS5148AGP&T---1 30SWL08MTE/0 30SWL08/T000 30SWL08/F000 30SWL16M16M/ 31POL0108001 MRS21059-U

Qty. 1 1 10 10 1 5 1

Cap. 2: 12

Konik-Tech

FERRULES, FITTINGS & KONIK INSTRUMENTS KITS


Installation kit SPmE Contains: Description 10 l top syringe adaptor for SPME SPME needle centering piece Fiber adapter complete SpmE Polydimethylsiloxane fiber (PK3) Drilled Septa 9.5 mm (PK50) KNK-415-350

Item n AS5147ADASPME-0 AS5148CENTAGU-0 AS5148ADAPSPME0 ABS57301 ABS23162-U

Qty. 1 1 1 1 1

Installation kit Magnetic Stirrer Contains: Description Magnetic stir bar (12x6 mm) (pk10)

KNK-415-360

Item n MVASWN532

Qty. 10

Installation Tray Kit for GC/LC 1 mL Vial Size Contains: Description 171 vials tray 1 ml vial (PK125) Al cap with PTFE septum 8 mm (PK125) 8 mm precision hand crimper

KNK-415-1111 ROBOKROM MULTIMODE AUTOSAMPLER Item n AS5163BAND171-0 KNK-V00-010 KNK-TS0-008 AUC308000 Qty. 1 1 1 1

Installation Tray Kit for GC/LC 2 mL Vial Size Contains: Description 105 vials tray 2 ml vial (PK100) Al cap with PTFE septum 11 mm (PK100) 11 mm precision hand crimper

KNK-415-2222

Item n AS5163BAND105-0 KNK-V00-020 KNK-TS0-011 AUC311990

Qty. 1 1 1 1

Installation Tray Kit for HS 6 mL Vial Size Contains: Description 32 vials tray 6 ml vial (PK125) Magnetic cap 20 mm (PK125) Chlorbutyl/PTFE septum 20 mm (PK125) 20 mm precision hand crimper for mag cap

KNK-415-3343 KNK-415-2222 Item n AS5163BAND032-0 KNK-V00-060 KNK-TMG-200 KNK-S01-200 ADCCR-20 Qty. 1 1 1 1 1

Installation Tray Kit for HS 10 mL Vial Size Contains: Description 32 vials tray 10 ml vial (PK125) Magnetic cap 20 mm (PK125) Chlorbutyl/PTFE septum 20 mm (PK125) 20 mm precision hand crimper for mag cap

KNK-415-3443

Item n AS5163BAND032-0 KNK-V00-100 KNK-TMG-200 KNK-S01-200 ADCCR-20

Qty. 1 1 1 1 1 KNK-415-3443

www.konik-group.com

Cap. 2: 13

FERRULES, FITTINGS & KONIK INSTRUMENTS KITS


Installation Tray Kit for HS 20 mL Vial Size Contains: Description 32 vials tray 20 ml vial (PK125) Magnetic cap 20 mm (PK125) Chlorbutyl/PTFE septum 20 mm (PK125) 20 mm precision hand crimper for mag cap KNK-415-3543

Item n AS5163BAND032-0 KNK-V00-200 KNK-TMG-200 KNK-S01-200 ADCCR-20

Qty. 1 1 1 1 1

Installation Tray Kit for P&T 20 mL Vial Size Contains: Description 32 vials tray 20 ml vial (PK125) Al cap 20 mm (PK125) Silicon/Al septum 20 mm (PK125) 20 mm precision hand crimper

KNK-415-3534

Item n AS5163BAND032-0 KNK-V00-200 KNK-TAL-200 KNK-S00-200 AUC320990

Qty. 1 1 1 1 1

Installation Tray Kit for SPmE 6 mL Vial Size Contains: Description 32 vials tray 6 ml vial (PK125) Magnetic cap 20 mm (PK125) High purity Si/PTFE septum (PK125) 20 mm precision hand crimper for mag cap

KNK-415-3346

Item n AS5163BAND032-0 KNK-V00-060 KNK-TMG-200 KNK-S03-200 ADCCR-20

Qty. 1 1 1 1 1

Installation Tray Kit for SPmE 10 mL Vial Size Contains: Description 32 vials tray 10 ml vial (PK125) Magnetic cap 20 mm (PK125) High purity Si/PTFE septum (PK125) 20 mm precision hand crimper for mag cap

KNK-415-3446

Item n AS5163BAND032-0 KNK-V00-100 KNK-TMG-200 KNK-S03-200 ADCCR-20

Qty. 1 1 1 1 1

Installation Tray Kit for TD 20 mL Vial Size Contains: Description 32 vials tray 20 ml vial (PK125) Magnetic cap 20 mm (PK125) Si/Al septum (PK125) 20 mm precision hand crimper for mag cap

KNK-415-3544

Item n AS5163BAND032-0 KNK-V00-200 KNK-TMG-200 KNK-S00-200 ADCCR-20

Qty. 1 1 1 1 1

Cap. 2: 14

Konik-Tech

FERRULES, FITTINGS & KONIK INSTRUMENTS KITS


Instalalation Kit For ROBOKROM GC Autoinjector 2 AXIS Contains: Description Top syringe adapter 10 l Bottom syringe adapter 5 l, 10 l 10 ml Screwtop vial (pk10) 18 mm Metallic Screw Cap (pk10) 18 mm PTFE/Silicone Seal (pk10) 10 l Syringe 1.8 ml Clear Screw Top Std. Mouth Vial Combo-Pack (100/pk) KNK-415-310-15

Item n AS5147ADAP010-0 AS5148ADAP--A-0 ADC10-HSV ADC18-MSC ADC18-ST-101 ACH80300 AUC123225

Qty 1 1 1 1 1 2 1

Installation Kit RBK LC Autoinjector 2 AXIS Contains: Description Bottom syringe adapter 0.5, 1, 25,100 i 500 l Top syringe adapter 100 l 100 l Syringe 10 ml Screwtop vial (pk10) 18 mm Metallic Screw Cap (pk10) 18 mm PTFE/Silicone Seal (pk10) 1.8 ml Clear Screw Top Std. Mouth Vial Combo-Pack (100/pk)

KNK-415-320-15

Item n AS5148ADAP--B-0 AS5147ADAP100-0 ACH80665 ADC10-HSV ADC18-MSC ADC18-ST-101 AUC123225

Qty 1 1 2 1 1 1 1

ROBOKROM AUTOINJECTOR 2 AXIS

Installation Kit SH For RBK Autoinjector 2 AXIS Contains: Description HS needle support complete T Brass 1/8 Nut Brass 1/8 Back and front ferrule Brass 1/8 Swagelok Union male-male 1/16 Ppolypropylene tubing 1/8 (5m) 10 ml vial (PK125) Magnetic cap 20 mm (PK125) Chlorbutyl/PTFE septum 20 mm (PK125) 20 mm precision hand crimper for mag cap

KNK-415-330-08

Item n AS5148AGHS----1 30SWL08MTE/0 30SWL08/T000 30SWL08/F000 30SWL16M16M/ 31POL0108001 KNK-V00-100 KNK-TMG-200 KNK-S01-200 ADCCR-20

Qty 1 1 10 10 1 1 1 1 1 1

Konik K2 Installation Kit


K2 system Installation Kit Contains: Description Graphite Ferrules SS tubing 0.75 mm, 1 m SS tubing 0.25 mm, 1 m Viton Oring 2.9 x 1.78 Viton Oring 5 x 2 K2 Empty trap - quartz K2 Tenax trap - quartz 1/16, 2-Hole , 0.5 mm Graphite Ferrules Guard Column 0.32 mm (3 m) Graphite/Vespel Ferrule (10u) 10 m PEEK filter Backferrule special tool Reducer DET/INY 1/16M - 1/8F KNK-K2-500

Item n AUC211400 31INX1675/00 31INX1625/00 37TOR02917/V 37TOR05020/V KNK-K2-LEMPTQ KNK-K2-LTENXQ AUC211125 AUC433116 AUC213105 AWV JR-68251 29FIJ055070/ GC4102ACOLD/I-0

Qty. 2 1 1 10 10 1 1 1 1 1 1 1 1

K2Q12 MULTIDIMENSIONAL HPLC+GC-MS

www.konik-group.com

Cap. 2: 15

You might also like