Professional Documents
Culture Documents
Power Requirements
These charts help determine your power requirements
This section shows the amount of power supplied by each of the base power supplies and the amount of power consumed by each DL205 device. The Power Consumed charts list how much INTERNAL power from each power source is required for the DL205 devices. Use this information when calculating the power budget for your system. In addition to the internal power sources, the DL205 bases offer a 24 VDC auxiliary power supply with external power connections. This auxiliary power supply can power external devices.
Power Supplied
Device Bases
D2-03B-1 D2-03BDC1-1 D2-04B-1 D2-04BDC1-1 D2-06B-1
5V(mA)
120 120 330 330 680
24V Auxiliary
0 0 0 0 0
24V Auxiliary
80 90 mA @ 12V 80 90 mA @ 12V 80 80 60 (note 1) 70 @ 12V (note 1) 60 70 @ 12V 50 / channel 60 / channel 50 (note 1) 140 80 (note 1) 100 (note 1) 80 (note 1) 0 60
D2-260 H2-WPLC*-**
DC Input Modules
D2-08ND3 D2-16ND3-2 D2-32ND3 D2-32ND3-2 50 100 25 25 0 0 0 0
AC Input Modules
D2-08NA-1 D2-08NA-2 D2-16NA 50 100 100 0 0 0
F2-04RTD F2-04THM
DC Output Modules
D2-04TD1 D2-08TD1 D2-08TD2 D2-16TD1-2 D2-16TD2-2 D2-32TD1 D2-32TD2 60 100 100 200 200 350 350 20 0 0 80 0 0 0
Specialty Modules
D2-CTRINT D2-CM / D2-EM H2-CTRIO D2-DCM F2-DEVNETS F2-SDS-1 H2-PBC 50* 100/130 400 300 160 160 530 450, (640) 450, (640) 235 0 0 0 0 0 0 0 0 0 0
AC Output Modules
D2-08TA F2-08TA D2-12TA 250 250 350 0 0 0
Remote I/O
0 0 0 0 H2-ERM(-F) D2-RMSM D2-RSSS 320, (450) 200 150 0 0 0
Power Consumed
Device
DV-1000
5V(mA)
150 210
24V Auxiliary
0 0
Operator Interface
C-more MicroGraphic
D2-12TR
Programming Devices
D2-HPP 200 0
*requires external 5VDC for outputs Note 1: Add an additional 20 mA per output loop.
446
PLC Products
1 - 80 0 - 633 - 0405
HERE
PLC Overview DL05/06 PLC DL105 PLC DL205 PLC DL305 PLC DL405 PLC
2" 50mm min
Environmental specifications
The Environmental Specifications table at the right lists specifications that apply globally to the DL205 system (CPUs, bases, and I/O modules). Be sure that the DL205 system is operated within these environmental specifications.
Environmental Specification
Storage Temperature Ambient Operating Temperature Ambient Humidity Vibration Resistance Shock Resistance Noise Immunity Atmosphere
o o o o
Rating
-4 F - 158 F (-20 C to 70 C) 32oF - 131oF (0oC to 55oC) 30%-95% relative humidity (non-condensing) MIL STD 810C, Method 514.2 MIL STD 810C, Method 516.2 NEMA (ICS3-304) No corrosive gases
Base
D2-03B-1, D2-03BDC1-1, D2-03BDC-2 D2-04B-1, D2-04BDC1-1, D2-04BDC-2 D2-06B-1, D2-06BDC1-1, D2-06BDC2-1 aD2-09B-1, D2-09BDC1-1, D2-09BDC2-1
A C
7.99" 203mm 7.63" 194mm 7.04" 179mm 8.46" 215mm 10.43" 265mm 10.07" 256mm 9.48" 241mm 10.90" 277mm 14.09" 358mm 13.74" 349mm 13.14" 334mm 14.56" 370mm
OK
Power
With D2-DSCB-1 on port 2 With 32pt. ZipLink cable or base expansion unit cable With 16pt. I/O With 8pt. I/O 5.85 148mm 4.45 113mm 3.62 92mm 2.95 75mm 3.54 90mm 2.99 76mm
Enclosures Appendix
B
With D2-EM base expansion module
Airflow
Part Index
w w w. a u to m at i o n d i re c t . c o m / d l 205
PLC Products
447