You are on page 1of 5

HCMC PC I.

SCOPE :

SPECIFICATION STANDARD RESISTANCE SET

This specification covers the supply of standard resistance set. II. STANDARD OF MANUFACTURE AND TEST :

The equipment shall conform to the latest edition of the appropriate IEC standards and/or other international standards. III. DESCRIPTION:

1. Function of equipment : The standard resistance set is a instrument for checking resistance measuring equipment such as ohmmeter, megohmmeter, wheastone bridge, ... 2. Test method : conform to the specification of IEC standard 3. Technical specification : Value : from 0.000001 to 100000M Power : min. 1 Watt Error : Max. 0.05% at 20C Insulation : 100M (with resistance value from 0.000001 to 1M) 20000M (with resistance value from 1M to 1000M) 1G (with resistance value from 1000M to 100000M) - Operating Temperature : - 15 to 55oC - Storage Temperature : -30 to 75 oC

IV.

REQUIREMENT OF TECHNICAL SUBMITTED WITH THE QUOTATION :

DOCUMENT

- Technical description, data sheet, catalogues and other material submitted with the quotation must enable the
/var/www/apps/conversion/tmp/scratch_1/138239111.doc 1/5

HCMC PC

SPECIFICATION STANDARD RESISTANCE SET

Purchaser to thoroughly evaluate the proposals as to its compliance with the inquiry specification. - Minimum requirements : + Detail summary of deviations to the inquiry specification. + Completed inquiry datasheet expressed at section V. + Catalogues containing outline dimension, technical data + List of main equipment and completed accessories which can perform all function described in section III have the following requirements : . Individual cost of main equipment and each accessory . Total cost of main equipment and completed accessory . Manufactures code of main equipment and each accessory + Connection diagram. + Certificate of quality management. V. REQUIREMENT OF DOCUMENT INCASE OF BID WINNING :

1. Documents required to be provide for commission : In order to ensure the quality of supplied goods, in case of bid winning, the Tenderer shall supply the following documents for the Purchaser : - Manufacturers Certificate of Quality. - Certificate of Origin issued by Chamber of Commerce of the manufacturing country. - Certificate of calibration of equipment approved by an independent lawful organization. 2. Documents required to be provide in accompany with supplied products : The Supplier shall enclose the following documents for supplied products : - 01 catalog - 01 instruction manual of installation, operation and maintenance.

/var/www/apps/conversion/tmp/scratch_1/138239111.doc

2/5

HCMC PC VI.

SPECIFICATION STANDARD RESISTANCE SET

REQUIREMENT OF INSTALLATION AND INSTRUCTION FOR USE : The Supplier shall ensure to supply the following service : - Installation the equipment completely. - Instruction to Purchasers staff how to use this equipment on site. - Trial run this equipment. VII. DATA SHEET : N 1. 2. 3. 4. 5. 6. 7. DESCRIPTION Manufacturer Country of origin Manufacture s code Standard of manufacture and test Standard of quality management Supply of the certificate of quality management In case of bid winning, the Tenderer shall supply the following documents for the Purchaser : - Manufacturers Certificate of Quality. - Certificate of Origin issued by Chamber of Commerce of the manufacturing country. - Certificate of calibration of equipment approved by an independent lawful organization. List of main equipment and completed accessories met all requirements of section IV is supplied in tender proposal. Quoted main equipment and REQUIREMENT QUOTED

Yes Yes Yes

8.

Yes

9.

Yes
3/5

/var/www/apps/conversion/tmp/scratch_1/138239111.doc

HCMC PC

SPECIFICATION STANDARD RESISTANCE SET

completed accessories described in above list can perform all function described in section III without addition of other necessary materials. 10. The Supplier shall ensure to supply the following service : Yes - Installation the equipment completely. Yes - Instruction to Purchasers staff how to use this equipment on site. Yes - Trial run this equipment. 11. Function of equipment The standard resistance set is a instrument for checking resistance measuring equipment such as ohmmeter, megohmmeter, wheastone bridge, ... 12. Test method conform to the specification of IEC standard Technical specification 13. Value from 0.000001 to 100000M 14. Power min. 1 Watt 15. Error Max. 0.05% at 20C 16. Insulation : - resistance value from 100M 0.000001 to 1M - resistance value from 20000M 1M to 1000M - resistance value from 1G 1000M to 100000M
/var/www/apps/conversion/tmp/scratch_1/138239111.doc 4/5

HCMC PC

SPECIFICATION STANDARD RESISTANCE SET - 15 to 55oC -30 to 75 oC The tenderer has to quote the dimensions and weight of the standard resistance set

17. Operating Temperature 18. Storage Temperature 19. - Dimensions : + Width + Height + Depth - Weight

/var/www/apps/conversion/tmp/scratch_1/138239111.doc

5/5

You might also like