You are on page 1of 2

Phuel S-Box

Phuel introduces the next generation of stuffing box by dispensing with conventional thinking and delivering significant improvements in handling, operation and performance. The result is not only the most distinctive stuffing box on the market but also the safest and easiest to use.
OIL TOOLS

The lightweight wheel assembly can be simply removed, leaving the housing still attached to the lubricator.This simplifies the handling weight during rigging and lifting operations. The sheave wheel is mounted onto a lightweight bracket that completely encompasses the wheel, preventing accidental finger traps while handling. Spring-loaded locking pins keep the wire on the wheel while reducing to a minimum the effort needed to load and unload the wire. A lifting point is also provided to allow the assembly to be lifted vertically off the test stump with ease.

The packing no longer comprises individual units that are time consuming to remove and replace. Instead Phuel provides a helicut packing stick that is automatically pumped out with piston pressure when the packing sub is removed. Reassembly is as easy just attach it and release the pressure.The time required to redress is dramatically reduced and, with the helicut, it can easily be changed, even with the wire present! Finally, the seal housing can be removed quickly from the housing for easier lubricator string rigging and handling.There is full bore clearance through the housing for the tool string to be inserted or removed, even when using roller stem. Another significant time saver! The Phuel S-Box breaks tradition to improve handling and safety while minimising down time. Contact us for more details.

A FLEXIBLE APPROACH, IMPROVED SAFETY AND EFFICIENCY THROUGH DESIGN

Phuel Oil Tools Ltd Unit 17 Denmore Industrial Estate Denmore Rd Bridge of Don Aberdeen AB23 8JW Tel: 01224 820 016 info@phueloiltools.com

www.phueloiltools.com

Phuel S-Box
Innovative helicut packing stick replaces individual packing units and ensures consistent performance by eliminating the variation in operator set-up

TECHNICAL DATA Typical Data


Special cersions are available upon request ConnectionType Operating Pressure Service 5-3/4-4 ACME 10,000 Psi H2S

Replaceable brass wire guide centralises without damaging the wire

Packing Nut

Grease nipple allows for preventative maintenance of the tapered roller bearings

Spring loaded plunger limits the bracket rotation for safer lifting Hydraulic piston provides the force for the packing and is not disassembled during the packing redress, so allowing longer seal life and a faster change Housing can be separated from the collar section to reduce the handling weight while rigging up Ball check valve automatically seals if the wire breaks Blow Out Preventer flows to the sealing position if the packing fails and will seal on static wire
OIL TOOLS

Glycol injection valve included as standard allows direct access to the wire to lubricate when using in gas wells

Helicut packing stick can be simply pumped out with piston pressure once the packing nut has been removed. Bleed off and the packing stick will automatically return

Connections are available to suit customer requirements

You might also like