You are on page 1of 3

Health, Safety & Environment, Procter & Gamble, Ibadan Plant.

Safety Plan

Risk Assessment Summary for construction and installation of chemical tanks

SN
1

WORK
Barricading of the site with caution tape

RISK Exposure to construction hazards by other personnel on site Trip hazard, fall, bruise & cuts

POSSIBLE CAUSE Construction site not adequately restricted

Site clearing

Excavation of foundation

Obstruction on access, Nail, sharp & protruding object on ground Edge Cave in, Fall, Trip, Loosed ground, Utility damages to underground hazards, Underground utilities & installations, cave installations, Access and in Egress, Exposure to construction vehicle Water accumulation

MITIGATION MEASURE Protective gloves must be worn when handling sharp roofing sheets, hard hat, safety boot are mandatory when doing the work. Construction site should be fenced round to guild against pedestrians. Personnel must use their complete PPEs safety boot, Coverall, Helmet while the site should be adequate cleared off & well planned. Practice good housekeeping Ensure that debris does not accumulate at work area, Personnel must use their complete PPEs safety boot, Coverall, Helmet, Put in place a cave in support ( wooden structures), Ladder should rightly positioned for Access and Egress, Excavation permit must be obtained prior the excavation works, indentify all underground utilities and installation as indicated in drawing before exaction works commences and Practice good housekeeping. Conduct regular site safety inspections. Personnel must use nose cover & complete PPEs safety boot, Coverall, Helmet, housekeeping should be ongoing. Ladder should rightly positioned for Access and Egress Leather hand glove should be worn by all personnel engaged in metal cutting, face shield should be worn to guild against arc hazard, nose cover must be worn, full body coverall must also be worn by both the fitters and welders, adequate housekeeping should be in place as the work progresses. Functional fire extinguisher with nonworking fire watch should be in place. Leather hand glove should be worn by all personnel engaged in metal cutting, eyes goggle, face shield should be worn to guild against arc hazard, nose cover must be worn, full body coverall must also be worn by both the

Casting of foundation structures Cutting , laying, grinding and welding of the tank base plate

Exposure to dust, Slip or Trip due to poor housekeeping Cuts bruise, exposure to welding arc, burns, particle inhalation, slip, trip & fall, Fire electric shock

Mixing of sand and cement, poor Loosed ground, housekeeping Personnel handle metal sheet with bare hand, not wearing complete coverall, not engaging in adequate house keeping Personnel handle the angle bars/ h beams with bare hand, not wearing complete coverall,

Cutting, Fixing, grinding and welding of the tank structure

Cuts bruise, exposure to welding arc, burns, particle inhalation, slip, trip & fall fire, electric shock

Health, Safety & Environment, Procter & Gamble, Ibadan Plant. Safety Plan

Risk Assessment Summary for construction and installation of chemical tanks personnel working @ height should wear full body harness not engaging in adequate house keeping Non availability of fire extinguisher. Personnel handle metal sheet with bare hand, not wearing complete coverall, trailing cables, not engaging in adequate house keeping fitters and welders, and adequate housekeeping should be in place as the work progresses. Standard scaffold should be set and approved by competent person. Functional fire extinguisher with nonworking fire watch should be in place. All electrical connections & cables should be submerged in water. Leather hand glove should be worn by all personnel engaged in metal cutting, eyes goggle, face shield should be worn to guild against arc hazard, nose cover must be worn, full body coverall must also be worn by both the fitters and welders, and adequate housekeeping should be in place as the work progresses. Suitable working platform should be put in place as the work progresses to height. Standard scaffold should be set and approved by competent person. Functional fire extinguisher with nonworking fire watch should be in place. All electrical connections & cables should be submerged in water. Personnel handle metal Leather hand glove should be worn by all personnel sheet with bare hand, not engaged in metal cutting, eyes goggle, face shield should wearing complete coverall, be worn to guild against arc hazard, nose cover must be trailing cables, not worn, full body coverall must also be worn by both the engaging in adequate fitters and welders, and adequate housekeeping should be house keeping in place as the work progresses. Suitable working platform should be put in place as the work progresses to height. Standard scaffold should be set and approved by competent person. Functional fire extinguisher with nonworking fire watch should be in place. All electrical connections & cables should be submerged in water. Personnel handle pies Leather hand glove should be worn by all personnel with bare hand, non engaged in metal cutting, face shield should be worn to wearing complete coverall, guild against arc hazard, nose cover must be worn, full exposed live cables, body coverall must also be worn by both the fitters and trailing cables, not welders, and adequate housekeeping should be in place as engaging in adequate the work progresses. Functional fire extinguisher with

Cutting , Fixing and welding of the metal sheets on the fabricated supports & structures of the tank

Cuts bruise, exposure to welding arc, burns, particle inhalation, slip, trip & fall fire, electric shock

Cutting metal sheets, Fixing and welding of the roof structures / metal sheets

Cuts bruise, exposure to welding arc, burns, particle inhalation, slip, trip & fall fire, electric shock

Welding cutting ,Fixing of pipes and control valves

Burns, cuts bruise, welding arc rays exposure, trip &fall Electric shock,

Health, Safety & Environment, Procter & Gamble, Ibadan Plant. Safety Plan

Risk Assessment Summary for construction and installation of chemical tanks house keeping
10 Sand blasting and painting Airborne dust, Metal dust, Silica sand, Air supply: skin itching Failure to use appropriate dust protective equipment when doing the work

nonworking fire watch should be in place.


Air supply: Air-supplied respirators must be used (1) when working inside of blast tanks , (2) when using portable units in areas without enclosure, and (3) under any circumstances where the operator is not physically separated from the abrasive material by an exhausted enclosure. If airline respirators and compressors are used, make sure the intake hose is placed in an area that provides clean air. An attendant should be in the area at all times, monitoring breathing air and assuring the blaster's safety. Maintained adequate housekeeping, check site before use on Level Ground. Do not over reach. Steps only to be used were no other access is possible. Do not work on top rail or mid rail of scaffold/ ladder Use body harness & anchored. Insulator to wear safety goggles, coverall. Cotton glove, insulator to wear safety Masks & Insulator to wear mask and use in well ventilated area

11

Insulation and cladding works

Slip trip & Fall, Fibre migration , Dust Inhalation, Cuts to Skin, Fume Inhalation

Poor housekeeping clear all obstructions on Failure to use appropriate dust protective equipments & coverall when doing the work site.

12

Housekeeping and exit from site

Trip hazard, fall, bruise & cuts

Obstruction on access, Nail, sharp & protruding object on ground

Construction site must be adequately cleared of all waste generated during construction period, also all un- used materials should be cleared out of site immediately after the competition of the project, Personnel must use their complete PPEs safety boot, Coverall, Helmet while the site should be adequate cleared off & well planned. Practice good housekeeping

Alignment: Name: Signature: HSE Name: Signature: P&G Supervisor Name: Signature: Contractor

You might also like