You are on page 1of 17

M/s BASUDEVI ERECTOR (Revised)

SL. DESCRIPTION UOM QTY NO. A TRANSFORMERS Installation, testing and assistance commissioning of transformers of the following ratings excluding the construction of foundation, including transportation from store / yard to site at the place of unpacking, positioning in place site assembly of loosely furnished accessories, including connection of auxiliary circuits, topping up 1 with oil and testing of oil with contractor's own test equipment, including connection of HV & LV side with existing busber ,existing cooling water supply and return line to be connected with new transformer cooling water flange with necessary modifications and necessary minor civil work and complete as per direction of Site In Charge, including supply of all labour . OFW outdoor transformer with OFF circuit tap changer , 33 / 6.9 a) Nos 2 KV , 16 MVA Filtration of transformer oil by filter machine provided by the 2 contractor for improving the insulation strength of oil to the Litr. 12000 required strength as per IS , including all labour , (Excluding the supply of oil)testing and assistance to commissioning of following Installation, 3 a) CTs including transportation from store / yard to site at the place of installation, unpacking, positioning including labour : 3 core CT ( 400/1 ) on 33 KV line with numerical relay. Installation, testing and assistance to commissioning of dry type transformer of the following rating, including transportation from store / yard to site at the place of installation, unpacking, positioning in place site assembly of loosely furnished accessories, including connection of auxiliary circuits, including fixing of rail and grouting of the same with nuts and bolts as per drawing during construction trasformer foundation etc., complete as per direction of Site In Charge, including supply of all labour as per approved drawings. Dry type transformer , 6.6/ 0.433 KV , 630 KVA LT SWITCHBOARDS/UPS/BATTERY CHARGES/PANELS Installation, testing and assistance to commissioning of LT SwitchBoards, UPS system, UPS DB, cubicles with electrical equipment, FCMA panels, misc.electrical panels etc.including transportation from store / yard to site at the place of installation, unpacking, assembly, including mounting and wiring of loose parts supplied by equipment vendor, interconnection of shipping sections and requisite interpanel wiring between shipping sections,installation support for foundations or support for fixing to wall made of steel structures, aligning, levelling, grouting ( with material), testing marking of cable entry points as per new GA drawing and making / cutting holes on the existing floor and finished the same. and commissioning assistance etc. complete as per direction of Site In 2x 10 KVA UPS + 1 set Battery bank + UPSDB with all accessories FCMA Starter 415 V, 3 phase , 2000A , LT Panel. NGR for 33 KV Transformer with panel UNIT RATE (INR) AMOUNT (INR)

M/s SRIKALI ENTERPRISES


UNIT RATE (INR) AMOUNT (INR)

180,000.00 3.50

360,000.00 42,000.00

300,000.00 12.00

600,000.00 144,000.00

Nos

2,500.00

15,000.00

3,500.00

21,000.00

a) B

Nos

8,500.00

17,000.00

30,000.00

60,000.00

a) b) c) d)

Set Nos Nos Nos

1 2 1 2

10,000.00 7,500.00 30,000.00 6,500.00

10,000.00 15,000.00 30,000.00 13,000.00

35,000.00 5,000.00 10,000.00 50,000.00

35,000.00 10,000.00 10,000.00 100,000.00

SL. NO. e) f)

DESCRIPTION Out door2 X( 2160 KVAR Capacitor Bank + Reactor + RVT + structure + Lightening arrestor with all accessories) , 1250 A, 6.6 KV , 3 Pole Isolator Installation, testing and assistance to commissioning of bus ducts of the following ratings between transformer secondary and the switchgear incomer panel, including transportation from store / yard to site at the place of installation, unpacking, making connections and installation of bends breaking of walls ( If required ) including minor civil work and making good of the same etc. including structural supports,including supply of all labour and 6.6 KV ,2000 A , HT Bus duct . AL + Structure length : ( as per sketch) 415 V , 1250 A , LT bus duct . AL, Length :As per sketch Installation, testing and assistance to commissioning of following indoor draw out type HV Switchboards and all other accessories, including transportation from store/yard to site at the place of installation , installation on foundationon with necessary supports(ISMC if required to be provided by BSL) & assembly including marking of cable entry points as per new GA drawing and making / cutting holes on the existing floor and finished the same. Mending good the existing hole before installation of panel, mounting and wiring of loose accessories supplied by equipment vendor, interconnection of shipping sections and requisite inter panel wiring between shipping sections,etc. aligning, levelling, grouting( with material) , testing complete as per direction of Site HV switchboards, 6.6 KV, 40 KA (3 sec), 2 Nos. I/Comers-2000 A + 2 No. Bus-Coupler +2 Nos Bus PT, 22 Nos. 1250 A Out-Going feeder (ie Total 28 Panel )as per Key SLD & Control Schematics DC SYSTEM / BATTERY BANK Installation, Testing & assistance to Commissioning of Lead acid Plante battery banks on wooden battery rack of the following ratings, including transportation from stores/yard to site at the place of installation, filling with electrolyte and making interconnection, aligning, levelling, etc. complete as per direction of Site In Charge, including supply of all labour as per approved 220 V DC , 110 Nos. Lead acid ( Plante battery ), 100 AH + 2 nos Charger + DCDB. PLUGS, SOCKETS AND JUNCTION BOXES Installation and assistance to commissioning of weatherproof - IP 55 metal clad 415V, TPN, Industrial type socket and plug with interlocking switch, with adequately sized cable adaptor box for incoming and outgoing cable terminations, complete as per direction of Site In Charge, including supply of all labour as per 63A, 415 V, 5 pin Welding socket 63A, 415 V, 5 pin Welding plugs CANOPIES Fabrication and installation of canopies for miscellaneous outdoor/Indoor equipment like motors, fire alarm points, telephones, communication hand set stations etc.to render them weather proof made out of 1.6 mm (16 gauge) sheet steel including supply of hardware and paint, painting, including all labour and INSTALLATION ,TESTING AND COMMISSIONING OF MOTORS

UOM Set Nos

QTY 2 2

UNIT RATE (INR) 20,000.00 5,500.00

AMOUNT (INR) 40,000.00 11,000.00

UNIT RATE (INR) 90,000.00 11,000.00

AMOUNT (INR) 180,000.00 22,000.00

a) b)

Set Set

2 2

2,500.00 1,250.00

5,000.00 2,500.00

60,000.00 48,000.00

120,000.00 96,000.00

a) C)

Set

170,000.00

170,000.00

280,000.00

280,000.00

a) D)

Set

18,000.00

18,000.00

30,000.00

30,000.00

a) b) E)

Nos Nos

2 2

850.00

1,700.00

1,000.00 500.00

2,000.00 1,000.00

MT

80,000.00

80,000.00

90,000.00

90,000.00

F)

SL. NO.

DESCRIPTION Installation ,Testing and assistance to commissioning of HV motors with base frame including nuts and bolt etc. of following rating and checking of all interface connections including polarity check of CT installed in motor, change of grease, wherever required, including supply of approved type of grease, no load / full load running of motoration, including checking vibration, temperature rise, and physical measurement of current ,complete as per direction of Site In Charge, including supply of all labour as per approved drawings. 1600 KW ,6.6 KV ,SQ.Cage Induction Motor with all accessories , terminal box , CTs SAFETY EQUIPMENT Installation of the following, including the supply of necessary clamps, bolts, rawl plugs etc., breaking and making good of walls, if required mounting, including all labour Shock hazard charts complete with frame and glass First Aid Boxes Fire Extingusher Laying of 900 mm wide safety insulation mats for following grades required for maintenance of electrical equipment in substation, including all labour and materials, as per applicable Indian or International Standards and Indian Electricity Rules. 6.6 KV grade Installationof following items as per applicable Indian Standards / Indian Electricity Rules Rubber hand gloves (6.6 KV grade) Enamailed/Printed caution boards LAYING OF CABLES Laying of cables of different voltage grade with suitable jack for drum and roller (6.6 KV & 0.415 KV) having following size,in the existing trays/newly laid trays/trenches/supported on structure/pull through pipes including supply of aluminium strip for fixing of cable and number tagging , supply and fixing of GI saddles and saddle bars for laying in walls including painting of terminal end with fire protection paint etc., including transportation from store/yard to site at the place of installation, unpacking, complete as per direction of Site In Charge, including supply of all HT Cable 6.6 KV, 3C x 300 Sq mm , AL XLPE ( UE ) ,armoured 6.6 KV, 3C x 240 Sq mm , AL XLPE ( UE ) ,armoured

UOM

QTY

UNIT RATE (INR)

AMOUNT (INR)

UNIT RATE (INR)

AMOUNT (INR)

a G) 1 a) b)

Nos

12,000.00

24,000.00

130,000.00

260,000.00

Nos Nos Lot

5 2 1

200.00 200.00 850.00

1,000.00 400.00 850.00

250.00 200.00 200.00

1,250.00 400.00 200.00

2 a) 3 a) b) H)

30

150.00

4,500.00

100.00

3,000.00

Pair Nos

4 25

200.00

5,000.00

270.00 30.00

1,080.00 750.00

a) b)

M M M M M M M M M M M M M M

640 1000 40 110 30 1360 300 20 300 280 40 500 1000 1000

150.00 130.00 30.00 25.00 20.00 20.00 15.00 16.00 13.00 12.00 12.00 12.00 17.00 13.00

96,000.00 130,000.00 1,200.00 2,750.00 600.00 27,200.00 4,500.00 320.00 3,900.00 3,360.00 480.00 6,000.00 17,000.00 13,000.00

120.00 100.00 50.00 45.00 40.00 33.00 25.00 25.00 20.00 25.00 30.00 20.00 28.00 25.00

76,800.00 100,000.00 2,000.00 4,950.00 1,200.00 44,880.00 7,500.00 500.00 6,000.00 7,000.00 1,200.00 10,000.00 28,000.00 25,000.00

LT Cable ( 650 / 1100 V ) a) 3.5 C x 120 Sq mm AL , Cable ,armoured 3.5 C x 70 Sq mm , AL , Cable armoured b) 3.5 C x 35 Sq mm , AL , Cable armoured 4 C x 25 Sq mm , AL , Cable armoured 4C x 6 Sq mm .AL , Cable armoured 2 C x 25 Sq mm .CU , Cable armoured 2 C x 6 Sq mm .AL , Cable armoured 2 C x 2.5 Sq mm .CU , Cable armoured 3 C x 25 Sq mm .CU , Cable armoured Control Cable ( 650 / 1100 V ) a) 3 C x 2.5 Sq mm CU cable b) 19 C x 2.5 Sq mm CU cable armoured c) 7C x 2.5 Sq mm CU cable armoured

SL. DESCRIPTION UOM NO. I ) END TERMINATIONS Cable end termination with Double Compression Gland, AL/CU tinned lugs ferruls and complete as per Approved Cable schedule including making hole in gland plate and blanking the extra hole 1 b) with Gomet and direction of Site In Charge, including supply of all labour ( Double Compression Glad, Cable lugs will be supplied by BLUE STAR free of Cost , other material like ferruls consumables required for completion of the work will be provided by contractor 3.5 C x 120 Sq mm AL Nos 3.5 C x 70 Sq mm , AL Nos 3.5 C x 35 Sq mm , AL , Nos 4 C x 25 Sq mm , AL , Nos 4C x 6 Sq mm .AL Nos 2 C x 25 Sq mm .CU Nos 2 C x 6 Sq mm .AL Nos 2 C x 2.5 Sq mm .CU , Nos 3 C x 25 Sq mm .CU Nos Termination Kit Erection of following termination kits (grade 6.6kV) with all necessary accessories including application of fire protection paint Single core 6.6kV grade Nos Three core 6.6kV grade Nos J) G.I.PIPES providing & Laying of following sizes of G.I. Pipes (medium) in required length fixed on steel, concrete or similar structure, laid in 1 trenches, ready to be buried in concrete including cutting, threading, bending and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs bushings etc. a) 50 mm NB M b) 100 mm NB M K) STRUCTURAL STEEL Providing & Fabrication and installation of MS base frames, supports for switchgear, and brackets for miscellaneous electrical equipments, Bus-Ducts cable and cable tray supports out of rolled MS sections, pipes, plates, etc. including welding, bolting, riveting, 1 MT supply of necessary, anchor bolts and grouting etc. supply and applying one coat of anti-rust primer and two finished coats of approved synthetic enamel paint including breaking walls, floors etc. for structures as required including supply of all GI hardware L) CABLE TRAYS Supply , Fabrication and fixing of steel cable trays (ladder type) made of flat & angles and cable tray fittings,including 2 coats of red 1 oxide primer and 2Coats of Enemal paint of approved shed and make including all labour as per approved drawings, 150mm,300mm,600 mm as per site requirement MT 2 a) b) c) M) 1 Installation of following galvanised slotted channel trays of 2 mm thickness and 50 mm high for supporting cables, including all labour 50 mm Wide 100 mm wide 450mm Wide MARKERS Supply & Installation of cable markers for underground cable runs with 14 SWG enamelled steel plate with white lettering on jade green background inclusive of providing and fixing supports,

QTY

UNIT RATE (INR)

AMOUNT (INR)

UNIT RATE (INR)

AMOUNT (INR)

2 4 4 20 12 4 10 14 4

275.00 200.00 150.00 150.00 110.00 125.00 90.00 85.00 90.00

550.00 800.00 600.00 3,000.00 1,320.00 500.00 900.00 1,190.00 360.00

600.00 400.00 300.00 300.00 190.00 280.00 175.00 280.00 280.00

1,200.00 1,600.00 1,200.00 6,000.00 2,280.00 1,120.00 1,750.00 3,920.00 1,120.00

6 20

250.00 5,000.00

1,500.00 100,000.00

3,000.00 7,000.00

18,000.00 140,000.00

50 20

950.00 1,850.00

47,500.00 37,000.00

425.00

21,250.00

1.75

75,000.00

131,250.00

90,000.00

157,500.00

1.5

75,000.00

112,500.00

100,000.00

150,000.00

M M M

200 100 100

35.00 45.00 75.00

7,000.00 4,500.00 7,500.00

50.00 60.00 200.00

10,000.00 6,000.00 20,000.00

Lot

10,000.00

10,000.00

15,000.00

15,000.00

SL. NO. 2 N) 1 O)

DESCRIPTION

UOM

QTY

UNIT RATE (INR) 200.00

AMOUNT (INR) 6,800.00

UNIT RATE (INR) 370.00

AMOUNT (INR) 12,580.00

a) b) c) 3 P 1 a) Q

a)

b) S 1 a) b) c)

Supply and installation of earth pit markers for directly buried GI pipe electrodes with 14 SWG enamelled steel plate engraved with NOS white letters BURIED, EARTH ELECTRODE on JADE green background complete with angle support and foundation, including SEALING COMPOUND Supply of effective cable sealing compound , including all labour KG and materials, . LIGHTING FIXTURES AND ACCESSORIES Installation, connection, testing and commissioing of following types of lighting fixtures and accessories, including cable termination and connection, fixing of cable glands, lugs, including supply of necessary hardwares, including transportation from store/yard to site at the place of installation, unpacking, including Industrial General Purpose Luminaries 2 x 36 watt TKC203 FTL as Nos per drawing no.RSP/BSL/19/16/DE/00028 Industrial General Purpose Luminaries 2 x 36 watt TBS 518 FTL as Nos per drawing no.RSP/BSL/19/16/DE/00028 Road lighting Luminaries HPSV SON 150W as per drawing Nos no.RSP/BSL/19/16/DE/00028 MLDB 25 KVA as per SLD set VENTILATION SYSTEM Installation, connection, testing and commissioing of following types of Pressurise Ventilation Fan including supply of all necessary supports etc. including all labour as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 3 phase, wall mounting type epoxy painted exhaust fan with louvers Nos and Filters. SOCKETS/RECEPTACLES AND SWITCHES / MCB UNITS Providing, Installation, connection, testing and commissioning of Switch Board following ratings of 240 V, single phase, sockets/receptables ( Make - ROMA/CRABATEE ) and metallic outlet boxes as described below including supply of all connected materials, including all labour and as per approved drawings, SB1 ( 5A piano type switch - 4 , 2 nos 5 pin socket) , SB2 ( 5A piano type switch - 3 ) , SB3( 5A piano type switch - 3) SB4 ( 5A piano type Nos switch -3 , 1 no 5pin socket) SB5 ( 5A piano type switch - 3 ,1 no 5 20A, DP Strater moulded case enclosure for split type air Nos conditioner JUNCTION BOXES ( OUTDOOR / INDOOR TYPE ) Supply and installation of dust and vermin proof G.I. sheet steel (1.6 mm thick) junction box WP type suitable for outdoor/indoor installation with number of outgoing ways as under, complete with PVC connectors, supply and fixing of cable glands, including supply and fixing of cable glands, including supply of required size and number of terminals, including all labour and materials, as per approved drawings, specifications of this tender and directions of 4 way( 100 X 100) Nos WIRING Circuit wiring using (size given below), copper conductor, PVC insulated cables (third core for earthing) from lighting/power panel/distribution junction box, including all labour 4 C x 6 sq.mm CUarmoured cable (Main Line) M 3 C x 4 sq.mm CU armoured cable (Sub Min Line) M Point Wiring with 2C X2.5 Sqmm armoured cable Point

34

75

150.00

11,250.00

910.00

68,250.00

26 9 7 1

425.00 425.00 425.00 10,000.00

11,050.00 3,825.00 2,975.00 10,000.00

450.00 450.00 800.00 15,000.00

11,700.00 4,050.00 5,600.00 15,000.00

1,500.00

3,000.00

1,500.00

3,000.00

5 2

950.00 2,500.00

4,750.00 5,000.00

715.00 1,800.00

3,575.00 3,600.00

21

550.00

11,550.00

700.00

14,700.00

250 100 60

45.00 42.00 250.00

11,250.00 4,200.00 15,000.00

80.00 75.00 600.00

20,000.00 7,500.00 36,000.00

SL. DESCRIPTION NO. d) 3 C x 6 sq mm CU armoured cable T

UOM M

QTY 200

UNIT RATE (INR) 42.00

AMOUNT (INR) 8,400.00

UNIT RATE (INR) 80.00

AMOUNT (INR) 16,000.00

a) U

a) b) c) d)

a) b) c) V

a) W 1 a) V 1 a) 2 3

EARTH ELECTRODES Installation, testing and commissioning of GI earth electrodes, complete with earth pit and all necessary materials including excavation of earth pit as per drawing and all necessary materials including filling with charcoal and salt, back filling providing necessary brickwork, connections, including all labour.( Only earth electrode to be provided by BSL as free delivery and other material Earth Pit Nos EARTH STRIPS installation and connection following GI earthing strip along the cable trenches or cable trays or fixing to walls or structures including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, etc.including all labour . 50 x 6 mm M 75 x 10 mm M 25 x3mm M 65 x 8 mm M Earthing Connection : Supply, Connecting individual equipment to the earth strip or earth plate with following sizes of G.I. wire / G.I. wire rope including the supply of G.I. wire / G.I. wire rope, lugs, conductors, connecting to the G.I. strip or earth plate and necessary hardware for connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of 3/8" dia (10mm) flexible rope M 5/8" dia (16mm) flexible rope M 8 SWG GI Wire M LIGHTNING ELECTRODES Installation, testing and commissioning of GI earth electrodes, complete with Lightning pit as per std. and all necessary materials including excavation of earth pit as per std and all necessary materials including excavation of Lightning pit, filling with charcoal and salt, back filling providing necessary brickwork, connections, GI earth electrode Nos LIGHTNING STRIPS installation and connection following GI Lightning strip with one no. Lightning Arrestor at roof. Strip will be laid along the walls as 50 x 6 mm M CIVIL WORKS Excavation and backfilling of trenches for cables and earth strip etc.in all types of soil except rock, for a maximum depth of 1.5 m, shoring, shuttering and dewatering (if necessary) including consolidation and disposal of surplus earth , including all labour . Backfilling of trenchs CUM Supply and spreading of approved find river sand/stone dust in CUM cable trenches, including all labour and materials. Supply and spreading of approved second class bricks of 75 mm SQM thickness in cable trenches for cable protection, including all labour

35

5,200.00

182,000.00

8,500.00

297,500.00

200 150 6 6

40.00 65.00 25.00 50.00

8,000.00 9,750.00 150.00 300.00

60.00 130.00 40.00 80.00

12,000.00 19,500.00 240.00 480.00

25 25 50

12.00 18.00 3.00

300.00 450.00 150.00

40.00 60.00 30.00

1,000.00 1,500.00 1,500.00

5,200.00

5,500.00

8,500.00

8,500.00

20

60.00

1,200.00

60.00

1,200.00

20 10 10

180.00 325.00 230.00

3,600.00 3,250.00 2,300.00

300.00 600.00 300.00

6,000.00 6,000.00 3,000.00

SL. DESCRIPTION UOM NO. R DISMANTELING Dismantling of Existing 16 MVA,33/6.9KV A Power Transformer Dismantling of power transformers of the following ratings excluding the foundation, including transportation of dismantling parts from transformer room to another convenient site as per RSP 1 recommendation.The Incoming Cable and Out going bus bar/seal off bushing arrangement should be retained as like as for the existing power transformer,The dismantling works must be includes all labour , as per approved drawings, RSP's instruction,Statutary rules a) Existing 16MVA Power Transformer dismantling works Nos Dismantling of Existing HT ( 6.6 kv) / LT/ Control panel excluding the foundation, including transportation of dismantling parts from transformer room to another convenient site as per RSP 2 recommendation.The Incoming Power Cable and control cable and Out going power /control cable arrangement should be retained as like as for the existing S/B,The dismantling works must be includes all labour , as per approved drawings, RSP's instruction,Statutary a) Existing 6.6 KV Swichboard/panels dismantling works with nos Existing Incoming 6.6 KV HT Busduct dismantling works b) termination nos c) LT / Control Panel nos Dismantling of Existing 6.6KV HT cable with termination from different feeder towards the existing 2 nos of existing Induction 3 motor(550KW) and synchronous motor(2.5MW) installed in Compressor house ( approx 150 metre length of cable ) a) Existing 6.6 KV Power cable Nos b) Existing Control cable/power cable,if any Lot

QTY

UNIT RATE (INR)

AMOUNT (INR)

UNIT RATE (INR)

AMOUNT (INR)

135,000.00

405,000.00

150,000.00

450,000.00

33 3 7

3,500.00 6,500.00 3,000.00

115,500.00 19,500.00 21,000.00

7,000.00 21,000.00 6,000.00

231,000.00 63,000.00 42,000.00

33 1

800.00 15,000.00

26,400.00 15,000.00 2,568,630.00

7,800.00 120,000.00

257,400.00 120,000.00 4,684,025.00

TOTAL

M/s BASUDEVI ERECTOR


SL. DESCRIPTION UOM QTY NO. A TRANSFORMERS Installation, testing and assistance commissioning of transformers of the following ratings excluding the construction of foundation, including transportation from store / yard to site at the place of unpacking, positioning in place site assembly of loosely furnished accessories, including connection of auxiliary circuits, topping up 1 with oil and testing of oil with contractor's own test equipment, including connection of HV & LV side with existing busber ,existing cooling water supply and return line to be connected with new transformer cooling water flange with necessary modifications and necessary minor civil work and complete as per direction of Site In Charge, including supply of all labour . OFW outdoor transformer with OFF circuit tap changer , 33 / 6.9 a) Nos 2 KV , 16 MVA Filtration of transformer oil by filter machine provided by the 2 contractor for improving the insulation strength of oil to the Litr. 12000 required strength as per IS , including all labour , (Excluding the supply of oil)testing and assistance to commissioning of following Installation, 3 CTs including transportation from store / yard to site at the place of installation, unpacking, positioning including labour : a) 3 core CT ( 400/1 ) on 33 KV line with numerical relay. Installation, testing and assistance to commissioning of dry type transformer of the following rating, including transportation from store / yard to site at the place of installation, unpacking, positioning in place site assembly of loosely furnished accessories, 4 including connection of auxiliary circuits, including fixing of rail and grouting of the same with nuts and bolts as per drawing during construction trasformer foundation etc., complete as per direction of Site In Charge, including supply of all labour as per approved drawings. a) Dry type transformer , 6.6/ 0.433 KV , 630 KVA B LT SWITCHBOARDS/UPS/BATTERY CHARGES/PANELS Installation, testing and assistance to commissioning of LT SwitchBoards, UPS system, UPS DB, cubicles with electrical equipment, FCMA panels, misc.electrical panels etc.including transportation from store / yard to site at the place of installation, unpacking, assembly, including mounting and wiring of loose parts supplied by 1 equipment vendor, interconnection of shipping sections and requisite interpanel wiring between shipping sections,installation support for foundations or support for fixing to wall made of steel structures, aligning, levelling, grouting ( with material), testing marking of cable entry points as per new GA drawing and making / cutting holes on the existing floor and finished the same. and commissioning assistance etc. complete as per direction of Site In a) 2x 10 KVA UPS + 1 set Battery bank + UPSDB with all accessories b) FCMA Starter c) 415 V, 3 phase , 2000A , LT Panel. UNIT RATE (INR) AMOUNT (INR)

M/s BASUDEVI ERECTOR (Revised)

M/s SRIKALI ENTERPRISES


UNIT RATE (INR) AMOUNT (INR)

M/s SRIKALI ENTERPRISES (Revised)

180,000.00 3.50

360,000.00 42,000.00

180,000.00 3.50

360,000.00 42,000.00

300,000.00 12.00

600,000.00 144,000.00

250,000.00 8.00

500,000.00 96,000.00

Nos 6 2,500.00 15,000.00 2,500.00 15,000.00 3,500.00 21,000.00 3,000.00 18,000.00

Nos

8,500.00

17,000.00

8,500.00

17,000.00 -

30,000.00

60,000.00

30,000.00

60,000.00

Set Nos Nos

1 2 1

15,000.00 7,500.00 60,000.00

15,000.00 15,000.00 60,000.00

10,000.00 7,500.00 30,000.00

10,000.00 15,000.00 30,000.00

35,000.00 5,000.00 10,000.00

35,000.00 10,000.00 10,000.00

25,000.00 5,000.00 10,000.00

25,000.00 10,000.00 10,000.00

SL. DESCRIPTION NO. d) NGR for 33 KV Transformer with panel

UOM Nos

QTY 2

UNIT RATE (INR) 6,500.00

AMOUNT (INR) 13,000.00

6,500.00

UNIT RATE (INR) 13,000.00 50,000.00

AMOUNT (INR) 100,000.00

20,000.00

40,000.00

SL. NO. e) f)

DESCRIPTION Out door2 X( 2160 KVAR Capacitor Bank + Reactor + RVT + structure + Lightening arrestor with all accessories) , 1250 A, 6.6 KV , 3 Pole Isolator Installation, testing and assistance to commissioning of bus ducts of the following ratings between transformer secondary and the switchgear incomer panel, including transportation from store / yard to site at the place of installation, unpacking, making connections and installation of bends breaking of walls ( If required ) including minor civil work and making good of the same etc. including structural supports,including supply of all labour and 6.6 KV ,2000 A , HT Bus duct . AL + Structure length : ( as per sketch) 415 V , 1250 A , LT bus duct . AL, Length :As per sketch Installation, testing and assistance to commissioning of following indoor draw out type HV Switchboards and all other accessories, including transportation from store/yard to site at the place of installation , installation on foundationon with necessary supports(ISMC if required to be provided by BSL) & assembly including marking of cable entry points as per new GA drawing and making / cutting holes on the existing floor and finished the same. Mending good the existing hole before installation of panel, mounting and wiring of loose accessories supplied by equipment vendor, interconnection of shipping sections and requisite inter panel wiring between shipping sections,etc. aligning, levelling, grouting( with material) , testing complete as per direction of Site HV switchboards, 6.6 KV, 40 KA (3 sec), 2 Nos. I/Comers-2000 A + 2 No. Bus-Coupler +2 Nos Bus PT, 22 Nos. 1250 A Out-Going feeder (ie Total 28 Panel )as per Key SLD & Control Schematics DC SYSTEM / BATTERY BANK Installation, Testing & assistance to Commissioning of Lead acid Plante battery banks on wooden battery rack of the following ratings, including transportation from stores/yard to site at the place of installation, filling with electrolyte and making interconnection, aligning, levelling, etc. complete as per direction of Site In Charge, including supply of all labour as per approved 220 V DC , 110 Nos. Lead acid ( Plante battery ), 100 AH + 2 nos Charger + DCDB. PLUGS, SOCKETS AND JUNCTION BOXES Installation and assistance to commissioning of weatherproof - IP 55 metal clad 415V, TPN, Industrial type socket and plug with interlocking switch, with adequately sized cable adaptor box for incoming and outgoing cable terminations, complete as per direction of Site In Charge, including supply of all labour as per 63A, 415 V, 5 pin Welding socket & Plug CANOPIES Fabrication and installation of canopies for miscellaneous outdoor/Indoor equipment like motors, fire alarm points, telephones, communication hand set stations etc.to render them weather proof made out of 1.6 mm (16 gauge) sheet steel including supply of hardware and paint, painting, including all labour and INSTALLATION ,TESTING AND COMMISSIONING OF MOTORS

UOM Set Nos

QTY 2 2

UNIT RATE (INR) 15,000.00 5,500.00

AMOUNT (INR) 30,000.00 11,000.00 20,000.00 5,500.00 40,000.00 11,000.00

UNIT RATE (INR) 90,000.00 11,000.00

AMOUNT (INR) 180,000.00 22,000.00 75,000.00 9,500.00 150,000.00 19,000.00

a) b)

Mtr. Mtr.

7 15

15,000.00 12,000.00

30,000.00 180,000.00

2,500.00 1,250.00

17,500.00 18,750.00

60,000.00 48,000.00

420,000.00 720,000.00

50,000.00 27,000.00

350,000.00 405,000.00

a) C)

Set

170,000.00

170,000.00

170,000.00

170,000.00 -

280,000.00

280,000.00

196,000.00

196,000.00

a) D)

Set

23,000.00

23,000.00

18,000.00

18,000.00 -

30,000.00

30,000.00

20,000.00

20,000.00

a) E)

Nos

850.00

1,700.00

850.00

1,700.00 -

1,000.00

2,000.00

1,200.00

2,400.00

MT

30,000.00

30,000.00

30,000.00

30,000.00

90,000.00

90,000.00

75,000.00

75,000.00

F)

SL. NO.

DESCRIPTION Installation ,Testing and assistance to commissioning of HV motors with base frame including nuts and bolt etc. of following rating and checking of all interface connections including polarity check of CT installed in motor, change of grease, wherever required, including supply of approved type of grease, no load / full load running of motoration, including checking vibration, temperature rise, and physical measurement of current ,complete as per direction of Site In Charge, including supply of all labour as per approved drawings. 1600 KW ,6.6 KV ,SQ.Cage Induction Motor with all accessories , terminal box , CTs SAFETY EQUIPMENT Installation of the following, including the supply of necessary clamps, bolts, rawl plugs etc., breaking and making good of walls, if required mounting, including all labour Shock hazard charts complete with frame and glass First Aid Boxes Fire Extingusher Laying of 900 mm wide safety insulation mats for following grades required for maintenance of electrical equipment in substation, including all labour and materials, as per applicable Indian or International Standards and Indian Electricity Rules. 6.6 KV grade Installationof following items as per applicable Indian Standards / Indian Electricity Rules Rubber hand gloves (6.6 KV grade) Enamailed/Printed caution boards LAYING OF CABLES Laying of cables of different voltage grade with suitable jack for drum and roller (6.6 KV & 0.415 KV) having following size,in the existing trays/newly laid trays/trenches/supported on structure/pull through pipes including supply of aluminium strip for fixing of cable and number tagging , supply and fixing of GI saddles and saddle bars for laying in walls including painting of terminal end with fire protection paint etc., including transportation from store/yard to site at the place of installation, unpacking, complete as per direction of Site In Charge, including supply of all HT Cable 6.6 KV, 3C x 300 Sq mm , AL XLPE ( UE ) ,armoured 6.6 KV, 3C x 240 Sq mm , AL XLPE ( UE ) ,armoured

UOM

QTY

UNIT RATE (INR)

AMOUNT (INR)

UNIT RATE (INR)

AMOUNT (INR)

a G) 1 a) b)

Nos

12,000.00

24,000.00

12,000.00

24,000.00 -

130,000.00

260,000.00

70,000.00

140,000.00

Nos Nos Lot

5 2 1

350.00 200.00 2,000.00

1,750.00 400.00 2,000.00

200.00 200.00 2,000.00

1,000.00 400.00 2,000.00 -

250.00 200.00 200.00

1,250.00 400.00 200.00

250.00 200.00

1,250.00 400.00

2 a) 3 a) b) H)

30

150.00

4,500.00

150.00

4,500.00 -

100.00

3,000.00

50.00

1,500.00

Pair Nos

4 25

200.00

5,000.00

200.00

5,000.00 -

270.00 30.00

1,080.00 750.00

30.00

750.00

M M M M M M M M M M M M M M 640 1000 40 110 30 1360 300 20 300 280 40 500 1000 1000 150.00 130.00 30.00 25.00 20.00 20.00 15.00 16.00 13.00 12.00 12.00 12.00 17.00 13.00 96,000.00 130,000.00 1,200.00 2,750.00 600.00 27,200.00 4,500.00 320.00 3,900.00 3,360.00 480.00 6,000.00 17,000.00 13,000.00 150.00 130.00 30.00 25.00 20.00 20.00 15.00 16.00 13.00 12.00 12.00 12.00 17.00 13.00 96,000.00 130,000.00 1,200.00 2,750.00 600.00 27,200.00 4,500.00 320.00 3,900.00 3,360.00 480.00 6,000.00 17,000.00 13,000.00 120.00 100.00 50.00 45.00 40.00 33.00 25.00 25.00 20.00 25.00 30.00 20.00 28.00 25.00 76,800.00 100,000.00 2,000.00 4,950.00 1,200.00 44,880.00 7,500.00 500.00 6,000.00 7,000.00 1,200.00 10,000.00 28,000.00 25,000.00 100.00 80.00 40.00 30.00 25.00 20.00 18.00 18.00 15.00 15.00 20.00 15.00 20.00 18.00 64,000.00 80,000.00 1,600.00 3,300.00 750.00 27,200.00 5,400.00 360.00 4,500.00 4,200.00 800.00 7,500.00 20,000.00 18,000.00

a) b)

LT Cable ( 650 / 1100 V ) a) 3.5 C x 120 Sq mm AL , Cable ,armoured 3.5 C x 70 Sq mm , AL , Cable armoured b) 3.5 C x 35 Sq mm , AL , Cable armoured 4 C x 25 Sq mm , AL , Cable armoured 4C x 6 Sq mm .AL , Cable armoured 2 C x 25 Sq mm .CU , Cable armoured 2 C x 6 Sq mm .AL , Cable armoured 2 C x 2.5 Sq mm .CU , Cable armoured 3 C x 25 Sq mm .CU , Cable armoured Control Cable ( 650 / 1100 V ) a) 3 C x 2.5 Sq mm CU cable b) 19 C x 2.5 Sq mm CU cable armoured c) 7C x 2.5 Sq mm CU cable armoured

SL. DESCRIPTION UOM NO. I ) END TERMINATIONS Cable end termination with Double Compression Gland, AL/CU tinned lugs ferruls and complete as per Approved Cable schedule including making hole in gland plate and blanking the extra hole 1 b) with Gomet and direction of Site In Charge, including supply of all labour ( Double Compression Glad, Cable lugs will be supplied by BLUE STAR free of Cost , other material like ferruls consumables required for completion of the work will be provided by contractor 3.5 C x 120 Sq mm AL Nos 3.5 C x 70 Sq mm , AL Nos 3.5 C x 35 Sq mm , AL , Nos 4 C x 25 Sq mm , AL , Nos 4C x 6 Sq mm .AL Nos 2 C x 25 Sq mm .CU Nos 2 C x 6 Sq mm .AL Nos 2 C x 2.5 Sq mm .CU , Nos 3 C x 25 Sq mm .CU Nos Termination Kit Erection of following termination kits (grade 6.6kV) with all necessary accessories including application of fire protection paint Single core 6.6kV grade Nos Three core 6.6kV grade Nos J) G.I.PIPES providing & Laying of following sizes of G.I. Pipes (medium) in required length fixed on steel, concrete or similar structure, laid in 1 trenches, ready to be buried in concrete including cutting, threading, bending and similar works, supply of clamps, small iron structures, spacers and installation of seats, plugs bushings etc. a) 50 mm NB M b) 100 mm NB M K) STRUCTURAL STEEL Providing & Fabrication and installation of MS base frames, supports for switchgear, and brackets for miscellaneous electrical equipments, Bus-Ducts cable and cable tray supports out of rolled MS sections, pipes, plates, etc. including welding, bolting, riveting, 1 MT supply of necessary, anchor bolts and grouting etc. supply and applying one coat of anti-rust primer and two finished coats of approved synthetic enamel paint including breaking walls, floors etc. for structures as required including supply of all GI hardware L) CABLE TRAYS Supply , Fabrication and fixing of steel cable trays (ladder type) made of flat & angles and cable tray fittings,including 2 coats of red 1 oxide primer and 2Coats of Enemal paint of approved shed and make including all labour as per approved drawings, 150mm,300mm,600 mm as per site requirement MT 2 a) b) c) M) 1 Installation of following galvanised slotted channel trays of 2 mm thickness and 50 mm high for supporting cables, including all labour 50 mm Wide 100 mm wide 450mm Wide MARKERS Supply & Installation of cable markers for underground cable runs with 14 SWG enamelled steel plate with white lettering on jade green background inclusive of providing and fixing supports,

QTY

UNIT RATE (INR)

AMOUNT (INR) -

UNIT RATE (INR)

AMOUNT (INR)

2 4 4 20 12 4 10 14 4

275.00 200.00 150.00 150.00 110.00 125.00 90.00 85.00 90.00

550.00 800.00 600.00 3,000.00 1,320.00 500.00 900.00 1,190.00 360.00

275.00 200.00 150.00 150.00 110.00 125.00 90.00 85.00 90.00

550.00 800.00 600.00 3,000.00 1,320.00 500.00 900.00 1,190.00 360.00 -

600.00 400.00 300.00 300.00 190.00 280.00 175.00 280.00 280.00

1,200.00 1,600.00 1,200.00 6,000.00 2,280.00 1,120.00 1,750.00 3,920.00 1,120.00

500.00 400.00 300.00 250.00 200.00 150.00 270.00 270.00 250.00

1,000.00 1,600.00 1,200.00 5,000.00 2,400.00 600.00 2,700.00 3,780.00 1,000.00

4 20

2,500.00 6,500.00

10,000.00 130,000.00

2,500.00 3,750.00

10,000.00 75,000.00 -

3,000.00 7,000.00

12,000.00 140,000.00

3,000.00 6,500.00

12,000.00 130,000.00

50 20

45.00

2,250.00

950.00 1,850.00

47,500.00 37,000.00 -

425.00

21,250.00

425.00

21,250.00

1.75

20,000.00

35,000.00

75,000.00

131,250.00

90,000.00

157,500.00

80,000.00

140,000.00

1.5 75,000.00 112,500.00 75,000.00 112,500.00 100,000.00 150,000.00 80,000.00 120,000.00

M M M

200 100 100

35.00 45.00 75.00

7,000.00 4,500.00 7,500.00

35.00 45.00 75.00

7,000.00 4,500.00 7,500.00 10,000.00

50.00 60.00 200.00

10,000.00 6,000.00 20,000.00

40.00 50.00 80.00

8,000.00 5,000.00 8,000.00

Lot

10,000.00

10,000.00

10,000.00

15,000.00

15,000.00

15,000.00

15,000.00

SL. NO. 2 N) 1 O)

DESCRIPTION

UOM

QTY

UNIT RATE (INR) 250.00

AMOUNT (INR) 8,500.00 200.00 6,800.00 -

UNIT RATE (INR) 370.00

AMOUNT (INR) 12,580.00 300.00 10,200.00

a) b) c) 3 P 1 a) Q

a)

b) S 1 a) b) c)

Supply and installation of earth pit markers for directly buried GI pipe electrodes with 14 SWG enamelled steel plate engraved with NOS white letters BURIED, EARTH ELECTRODE on JADE green background complete with angle support and foundation, including SEALING COMPOUND Supply of effective cable sealing compound , including all labour KG and materials, . LIGHTING FIXTURES AND ACCESSORIES Installation, connection, testing and commissioing of following types of lighting fixtures and accessories, including cable termination and connection, fixing of cable glands, lugs, including supply of necessary hardwares, including transportation from store/yard to site at the place of installation, unpacking, including Industrial General Purpose Luminaries 2 x 36 watt TKC203 FTL as Nos per drawing no.RSP/BSL/19/16/DE/00028 Industrial General Purpose Luminaries 2 x 36 watt TBS 518 FTL as Nos per drawing no.RSP/BSL/19/16/DE/00028 Road lighting Luminaries HPSV SON 150W as per drawing Nos no.RSP/BSL/19/16/DE/00028 MLDB 25 KVA as per SLD set VENTILATION SYSTEM Installation, connection, testing and commissioing of following types of Pressurise Ventilation Fan including supply of all necessary supports etc. including all labour as per approved drawings, specifications of this tender and directions of Engineer-in-Charge. 3 phase, wall mounting type epoxy painted exhaust fan with louvers Nos and Filters. SOCKETS/RECEPTACLES AND SWITCHES / MCB UNITS Providing, Installation, connection, testing and commissioning of Switch Board following ratings of 240 V, single phase, sockets/receptables ( Make - ROMA/CRABATEE ) and metallic outlet boxes as described below including supply of all connected materials, including all labour and as per approved drawings, SB1 ( 5A piano type switch - 4 , 2 nos 5 pin socket) , SB2 ( 5A piano type switch - 3 ) , SB3( 5A piano type switch - 3) SB4 ( 5A piano type Nos switch -3 , 1 no 5pin socket) SB5 ( 5A piano type switch - 3 ,1 no 5 20A, DP Strater moulded case enclosure for split type air Nos conditioner JUNCTION BOXES ( OUTDOOR / INDOOR TYPE ) Supply and installation of dust and vermin proof G.I. sheet steel (1.6 mm thick) junction box WP type suitable for outdoor/indoor installation with number of outgoing ways as under, complete with PVC connectors, supply and fixing of cable glands, including supply and fixing of cable glands, including supply of required size and number of terminals, including all labour and materials, as per approved drawings, specifications of this tender and directions of 4 way( 100 X 100) Nos WIRING Circuit wiring using (size given below), copper conductor, PVC insulated cables (third core for earthing) from lighting/power panel/distribution junction box, including all labour 4 C x 6 sq.mm CUarmoured cable (Main Line) M 3 C x 4 sq.mm CU armoured cable (Sub Min Line) M Point Wiring with 2C X2.5 Sqmm armoured cable Point

34

75

150.00

11,250.00

150.00

11,250.00 -

910.00

68,250.00

850.00

63,750.00

26 9 7 1

480.00 480.00 450.00 12,000.00

12,480.00 4,320.00 3,150.00 12,500.00

425.00 425.00 425.00 10,000.00

11,050.00 3,825.00 2,975.00 10,000.00 -

450.00 450.00 800.00 15,000.00

11,700.00 4,050.00 5,600.00 15,000.00

400.00 400.00 650.00 12,000.00

10,400.00 3,600.00 4,550.00 12,000.00

1,500.00

3,000.00

1,500.00

3,000.00 -

1,500.00

3,000.00

1,500.00

3,000.00

5 2

250.00 250.00

1,250.00 500.00

950.00 2,500.00

4,750.00 5,000.00 -

715.00 1,800.00

3,575.00 3,600.00

715.00 1,800.00

3,575.00 3,600.00

21

150.00

3,150.00

550.00

11,550.00 -

700.00

14,700.00

600.00

12,600.00

250 100 60

45.00 42.00 250.00

11,250.00 4,200.00 15,000.00

45.00 42.00 250.00

11,250.00 4,200.00 15,000.00

80.00 75.00 600.00

20,000.00 7,500.00 36,000.00

75.00 65.00 600.00

18,750.00 6,500.00 36,000.00

SL. DESCRIPTION NO. d) 3 C x 6 sq mm CU armoured cable T

UOM M

QTY 200

UNIT RATE (INR) 42.00

AMOUNT (INR) 8,400.00

42.00

a) U

a) b) c) d)

a) b) c) V

a) W 1 a) V 1 a) 2 3

EARTH ELECTRODES Installation, testing and commissioning of GI earth electrodes, complete with earth pit and all necessary materials including excavation of earth pit as per drawing and all necessary materials including filling with charcoal and salt, back filling providing necessary brickwork, connections, including all labour.( Only earth electrode to be provided by BSL as free delivery and other material Earth Pit ( 600mm. X 600mm.) PCC /RCC chamber. Nos EARTH STRIPS installation and connection following GI earthing strip along the cable trenches or cable trays or fixing to walls or structures including welding at joints, providing anti-corrosive paint or bitumen and jute covering for welded portion, clamping and necessary hardware for connecting, etc.including all labour . 50 x 6 mm M 75 x 10 mm M 25 x3mm M 65 x 8 mm M Earthing Connection : Supply, Connecting individual equipment to the earth strip or earth plate with following sizes of G.I. wire / G.I. wire rope including the supply of G.I. wire / G.I. wire rope, lugs, conductors, connecting to the G.I. strip or earth plate and necessary hardware for connection, including all labour and materials, as per approved drawings, specifications of this tender and directions of 3/8" dia (10mm) flexible rope M 5/8" dia (16mm) flexible rope M 8 SWG GI Wire M LIGHTNING ELECTRODES Installation, testing and commissioning of GI earth electrodes, complete with Lightning pit as per std. and all necessary materials including excavation of earth pit as per std and all necessary materials including excavation of Lightning pit, filling with charcoal and salt, back filling providing necessary brickwork, connections, GI earth electrode Nos LIGHTNING STRIPS installation and connection following GI Lightning strip with one no. Lightning Arrestor at roof. Strip will be laid along the walls as 50 x 6 mm M CIVIL WORKS Excavation and backfilling of trenches for cables and earth strip etc.in all types of soil except rock, for a maximum depth of 1.5 m, shoring, shuttering and dewatering (if necessary) including consolidation and disposal of surplus earth , including all labour . Backfilling of trenchs CUM Supply and spreading of approved find river sand/stone dust in CUM cable trenches, including all labour and materials. Supply and spreading of approved second class bricks of 75 mm SQM thickness in cable trenches for cable protection, including all labour

UNIT RATE (INR) 8,400.00 80.00 -

AMOUNT (INR) 16,000.00

70.00

14,000.00

35

5,500.00

192,500.00

5,200.00

182,000.00 -

8,500.00

297,500.00

7,000.00

245,000.00

200 150 6 6

40.00 65.00 25.00 50.00

8,000.00 9,750.00 150.00 300.00

40.00 65.00 25.00 50.00

8,000.00 9,750.00 150.00 300.00

60.00 130.00 40.00 80.00

12,000.00 19,500.00 240.00 480.00

50.00 100.00 30.00 75.00

10,000.00 15,000.00 180.00 450.00

25 25 50

12.00 18.00 3.00

300.00 450.00 150.00

12.00 18.00 3.00

300.00 450.00 150.00 -

40.00 60.00 30.00

1,000.00 1,500.00 1,500.00

40.00 60.00 30.00

1,000.00 1,500.00 1,500.00

5,500.00

5,500.00

5,200.00

5,200.00 -

8,500.00

8,500.00

7,000.00

7,000.00

20

60.00

1,200.00

60.00

1,200.00 -

60.00

1,200.00

50.00

1,000.00

20 10 10

180.00 325.00 230.00

3,600.00 3,250.00 2,300.00

180.00 325.00 230.00

3,600.00 3,250.00 2,300.00

300.00 600.00 300.00

6,000.00 6,000.00 3,000.00

300.00 500.00 300.00

6,000.00 5,000.00 3,000.00

SL. DESCRIPTION UOM NO. R DISMANTELING Dismantling of Existing 16 MVA,33/6.9KV A Power Transformer Dismantling of power transformers of the following ratings excluding the foundation, including transportation of dismantling parts from transformer room to another convenient site as per RSP 1 recommendation.The Incoming Cable and Out going bus bar/seal off bushing arrangement should be retained as like as for the existing power transformer,The dismantling works must be includes all labour , as per approved drawings, RSP's instruction,Statutary rules a) Existing 16MVA Power Transformer dismantling works Nos Dismantling of Existing HT ( 6.6 kv) / LT/ Control panel excluding the foundation, including transportation of dismantling parts from transformer room to another convenient site as per RSP 2 recommendation.The Incoming Power Cable and control cable and Out going power /control cable arrangement should be retained as like as for the existing S/B,The dismantling works must be includes all labour , as per approved drawings, RSP's instruction,Statutary a) Existing 6.6 KV Swichboard/panels dismantling works with nos Existing Incoming 6.6 KV HT Busduct dismantling works b) termination nos c) LT / Control Panel nos Dismantling of Existing 6.6KV HT cable with termination from different feeder towards the existing 2 nos of existing Induction 3 motor(550KW) and synchronous motor(2.5MW) installed in Compressor house ( approx 150 metre length of cable ) a) Existing 6.6 KV Power cable Nos b) Existing Control cable/power cable,if any Lot

QTY

UNIT RATE (INR)

AMOUNT (INR) -

UNIT RATE (INR)

AMOUNT (INR)

135,000.00

405,000.00

135,000.00

405,000.00

150,000.00

450,000.00

125,000.00

375,000.00

33 3 7

4,500.00 10,000.00 3,000.00

148,500.00 30,000.00 21,000.00

3,500.00 6,500.00 3,000.00

115,500.00 19,500.00 21,000.00 -

7,000.00 21,000.00 6,000.00

231,000.00 63,000.00 42,000.00

5,000.00 15,000.00 5,000.00

165,000.00 45,000.00 35,000.00

33 1

800.00 15,000.00

26,400.00 15,000.00 2,656,930.00

800.00 15,000.00

26,400.00 15,000.00 2,531,730.00

7,800.00 120,000.00

257,400.00 120,000.00 5,601,025.00

7,000.00 90,000.00

231,000.00 90,000.00 4,276,595.00

TOTAL

600000 120000 45000 24000 70000 5000 65000 20000 300000 10000 150000 110000 340000 70000 1500 1500 75000 18000 3500 2000 5000 10350 17500 103680 150000 3600 9570 2340 102000 18000 1380 17400 19600 3000 18000 63000 42000 900 650 1180 6500 3600 1200 2750 3500 1000 27450 161500 6250 52500 45000 16000 11000 14000 10000 23120

375000 15600 5400 5600 800 3500 2500 750 10500 15000 5500 33000 12000 350000 20000 22500 330 450 500 625 750 10000 2000 12700 1000 1250 450000 330000 150000 105000 330000 50000

You might also like