Professional Documents
Culture Documents
FEATURES AND BENEFITS VERY SMALL CONDUCTION LOSSES NEGLIGIBLE SWITCHING LOSSES EXTREMELY FAST SWITCHING INSULATED PACKAGE: ISOWATT220AB, TO-220FPAB Insulating voltage = 2000V DC Capacitance = 12pF
s s s s
A1
A2
A1 K
A2
TO-220AB STPS2045CT
K
ISOWATT220AB STPS2045CF
DESCRIPTION Dual center tap Schottky rectifier suited for SwitchMode Power Supply and high frequency DC to DC converters. Packaged either in TO-220AB, ISOWATT220AB, TO-220FPAB or D2PAK, this device is especially intended for use in low voltage, high frequency inverters, free wheeling and polarity protection applications. ABSOLUTE RATINGS (limiting values, per diode) Symbol VRRM IF(RMS) IF(AV) RMS forward current Average forward current = 0.5 TO-220AB / D PAK ISOWATT220AB TO-220FPAB
2
A2 A1
A2 K A1
D2PAK STPS2045CG
TO-220FPAB STPS2045CFP
Parameter Repetitive peak reverse voltage Tc = 155C Tc = 125C Per diode Per device
Unit V A A
Surge non repetitive forward current Repetitive peak reverse current Non repetitive peak reverse current Storage temperature range Maximum operating junction temperature * Critical rate of rise of reverse voltage
A A A C C V/s
dPtot 1 thermal runaway condition for a diode on its own heatsink < dTj Rth( j a )
1/7
STPS2045CT/CF/CG/CFP
THERMAL RESISTANCES Symbol Rth (j-c) Junction to case Parameter TO-220AB / D2PAK ISOWATT220AB TO-220FPAB Rth (c) TO-220AB / D2PAK ISOWATT220AB TO-220FPAB When the diodes 1 and 2 are used simultaneously: Tj (diode 1) = P (diode1) x Rth(j-c) (per diode) + P (diode 2) x Rth(c) STATIC ELECTRICAL CHARACTERISTICS (Per diode) Symbol IR * Parameter Reverse leakage current Tests Conditions Tj = 25C Tj = 125C VF * Forward voltage drop Tj = 125C Tj = 25C Tj = 125C
Pulse test : * tp = 380 s, < 2%
Value Per diode Total Per diode Total Coupling 2.2 1.3 4.5 3.5 0.3 2.5
Unit C/W
Min.
Typ.
Max. 100
Unit A mA V
To evaluate the conduction losses use the following equation : P = 0.42 x IF(AV) + 0.015 IF2(RMS)
2/7
STPS2045CT/CF/CG/CFP
Fig. 1: Average forward power dissipation versus average forward current (per diode). Fig. 2: Average current versus temperature (=0.5, per diode). ambient
IF(av)(A)
= 0.1 = 0.05 = 0.2 = 0.5
12
Rth(j-a)=Rth(j-c)
10
=1
TO-220AB DPAK
8 6 4 2
T
Rth(j-a)=15C/W
ISOWATT220AB TO-220FPAB
tp
10
11
12
=tp/T
tp
25
Fig. 3-1: Non repetitive surge peak forward current versus overload duration (maximum values, per diode) (TO-220AB and D2PAK).
Fig. 3-2: Non repetitive surge peak forward current versus overload duration (maximum values, per diode) (ISOWATT220AB, TO-220FPAB).
IM(A)
100 80 60
Tc=75C Tc=100C Tc=75C
40 20 0 1E-3
IM t
Tc=100C
Tc=125C
Tc=125C
=0.5
=0.5
t(s)
1E-2
1E-1
1E+0
Fig. 4-1: Relative variation of thermal transient impedance junction to case versus pulse duration (TO-220AB and D2PAK).
Fig. 4-2: Relative variation of thermal transient impedance junction to case versus pulse duration (ISOWATT220AB, TO-220FPAB).
Zth(j-c)/Rth(j-c)
= 0.5
0.2
0.2
tp(s) 1E-3 1E-2
=tp/T
tp
tp(s)
=tp/T
tp
0.0 1E-4
1E-1
1E+0
0.0 1E-3
1E-2
1E-1
1E+0
1E+1
3/7
STPS2045CT/CF/CG/CFP
Fig. 5: Reverse leakage current versus reverse voltage applied (typical values, per diode). Fig. 6: Junction capacitance versus reverse voltage applied (typical values, per diode).
C(pF) 1000
F=1MHz Tj=25C
500
1E+1 1E+0
Tj=25C
200 VR(V)
30 35 40 45
VR(V) 1E-1 0 5 10 15 20 25
100
10
20
50
Fig. 7: Forward voltage drop versus forward current (maximum values, per diode).
Fig. 8: Thermal resistance junction to ambient versus copper surface under tab (Epoxy printed circuit board, copper thickness: 35m).
Rth(j-a) (C/W) 80
IFM(A) 100.0
Tj=125C Typical values
70
Tj=25C
10.0
Tj=125C
60 50 40 30 20 10 0
1.0 VFM(V) 0.1 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6
S(Cu) (cm) 0 5 10 15 20 25 30 35 40
4/7
STPS2045CT/CF/CG/CFP
PACKAGE MECHANICAL DATA D2PAK DIMENSIONS REF.
A E L2 C2
Millimeters Min. Max. 4.60 2.69 0.23 0.93 1.70 0.60 1.36 9.35 10.40 5.28 15.85 1.40 1.75 3.20 8 4.40 2.49 0.03 0.70 1.14 0.45 1.23 8.95 10.00 4.88 15.00 1.27 1.40 2.40 0
Inches Min. 0.173 0.098 0.001 0.027 0.045 0.017 0.048 0.352 0.393 0.192 0.590 0.050 0.055 0.094 0 Max. 0.181 0.106 0.009 0.037 0.067 0.024 0.054 0.368 0.409 0.208 0.624 0.055 0.069 0.126 8
A A1 A2
D
L L3 A1 B2 B G A2 C R
B B2 C C2 D E G L L2 L3 M R V2
V2
0.40 typ.
0.016 typ.
10.30 1.30
5.08
3.70 8.90
5/7
STPS2045CT/CF/CG/CFP
PACKAGE MECHANICAL DATA TO-220AB REF.
H2 A
L5 L7 Dia
OPTIONAL
L6
L2
L9
D
F2
F1(x2) L4
F
E
G1 G
A C D E F F1 F2 G G1 H2 L2 L4 L5 L6 L7 L9 M Dia.
DIMENSIONS Millimeters Inches Min. Max. Min. Max. 4.30 4.60 0.169 0.181 1.22 1.32 0.048 0.052 2.40 2.72 0.094 0.107 0.33 0.70 0.013 0.028 0.61 0.93 0.024 0.037 1.14 1.70 0.045 0.067 1.14 1.70 0.045 0.067 4.95 5.15 0.195 0.202 2.40 2.70 0.094 0.106 10.00 10.40 0.394 0.409 16.00 Typ. 0.630 Typ. 13.00 14.00 0.512 0.551 2.65 2.95 0.104 0.116 14.80 15.75 0.583 0.620 6.20 6.60 0.244 0.260 3.40 3.94 0.134 0.155 2.60 Typ. 0.102 Typ. 3.75 3.89 0.148 0.153
Inches Min. Max. 0.173 0.181 0.098 0.106 0.098 0.108 0.018 0.027 0.030 0.039 0.045 0.067 0.045 0.067 0.195 0.205 0.094 0.106 0.393 0.409 0.63 Typ. 1.126 1.205 0.386 0.417 0.114 0.142 0.626 0.646 0.354 0.366 0.118 0.126
Dia L6 L2 L3 L5 D F1 L4 F2 L7
F G1 G
A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Dia.
Min. Max. 4.4 4.6 2.5 2.7 2.5 2.75 0.45 0.70 0.75 1 1.15 1.70 1.15 1.70 4.95 5.20 2.4 2.7 10 10.4 16 Typ. 28.6 30.6 9.8 10.6 2.9 3.6 15.9 16.4 9.00 9.30 3.00 3.20
6/7
STPS2045CT/CF/CG/CFP
PACKAGE MECHANICAL DATA ISOWATT220AB DIMENSIONS REF. A B D E F F1 F2 G G1 H L2 L3 L4 L6 L7 Diam Type STPS2045CT STPS2045CF STPS2045CFP STPS2045CG STPS2045CG-TR
s
Millimeters Min. Max. 4.40 4.60 2.50 2.70 2.50 2.75 0.40 0.70 0.75 1.00 1.15 1.70 1.15 1.70 4.95 5.20 2.40 2.70 10.00 10.40 16.00 typ. 28.60 30.60 9.80 10.60 15.90 16.40 9.00 9.30 3.00 3.20 Base qty 50 50 50 50 1000
Inches Min. Max. 0.173 0.181 0.098 0.106 0.098 0.108 0.016 0.028 0.030 0.039 0.045 0.067 0.045 0.067 0.195 0.205 0.094 0.106 0.394 0.409 0.630 typ. 1.125 1.205 0.386 0.417 0.626 0.646 0.354 0.366 0.118 0.126 Delivery mode Tube Tube Tube Tube Tape & reel
Cooling method: by conduction (C) Recommended torque value: 0.55 N.m. Maximum torque value: 0.7 N.m. Epoxy meets UL94,V0
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics 2002 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 7/7
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.