You are on page 1of 2

AP-550IR

Extreme Long-Range IR Camera


Key Features
Long-range true day/night IR camera Superb color by day and quality B/W at night 1/3 550TVL Ex-CCD for crystal-clear images 5mm-50mm varifocal IR corrected lens Active IR performs in 0 Lux (complete darkness) 500 feet of recognition / 350 feet of identification Split window eliminates IR bleed and reflection Easy installation via OSD and lens trap door Intelligent IR with no washout or hotspots IP66 rugged vandal proof enclosure and mount Internal heater/blower -50C to +50C operation Installer friendly plug and play operation Photocell for automatic day/night switching (EPC)

Performance Overview
Ascendents AP-550IR is a long-range environment plug and play day/night camera. Ascendents IR cameras are designed to offer absolute performance and use the highest quality components and contain built in redundancies such as dual PC board designs and capacitors to help reduce the effects of power noise for unparalleled reliability. This makes it the clear choice for security professionals in applications ranging from parking lots to military compounds.

Enclosure
These components are integrated into a rugged extruded aluminum housing with optically-pure polycarbonate viewing window. The AP-550IR is rated to an impressive IP66 water-ingress protection allowing it to be installed outdoors or in wash-down applications. An internal heater/blower kit maintains a consistent internal temperature for operation in -50C to +50C allowing this camera to maintain performance in the most extreme environments.

True Day/Night
The AP-550IR incorporates super bright IR LEDs that are different sizes and angles for evenly distributed IR. This eliminates IR hotspots and washout for up to 500 feet. The camera comes equipped with a Mechanical IR Cut Filter (MICF) that is photocell controlled for automatic switching between day and night modes. All of the IR LEDs are hand welded to increase both performance and longevity.

Quick Installation
The AP-550IR is a true plug and play camera designed with the installer in mind and can be set up in minutes. It comes with a heavy-duty rotating wall mount with a wiring tunnel for the video and power leads. The toolless trap door allows access for camera lens focusing and OSD camera programming for a quick and professional install. The AP-550IR can become a network video camera when used with Ascendents IP ProServer or X4S DVR.

Optical Assembly
The AP-550IR uses a 1/3 550TVL high resolution CCD imager that is sensitive to both normal light and infrared wavelengths. This working in tandem with a 5mm50mm IR corrected varifocal lens provides both longrage and wide-angle viewing.

250.426.8100

Fax 250.426.8170

www.ascendentgroup.com

info@ascendentgroup.com

AP-550IR
Extreme Long-Range IR Camera
Optics Lens Image Sensor Resolution Minimum Illumination Signal to noise ratio Shutter Speed BNC Video Out Filter IR Illumination Day/Night Switching Distance Wavelength IR LEDs Intelligent IR Control Lifetime Physical Construction Viewing Window Split Window Standard Colors Dimensions Weight Installation OSD Lens Trap Door Mount Hardware Environmental Operational Temperature Environmental Electrical Input Voltage Power Consumption Available Options Additional IR Illuminators Mounts IP-Pro Server (X4 Platform) Camera Color System
250.426.8100 | Fax 250.426.8170 |

5mm-50mm IR corrected varifocal lens 1/3 " Ex-View Super HAD II CCD 550TVL day / 600TVL night (optional 700TVL) Color .05 Lux B/W 0 Lux (IR on) 50dB+ Auto: 1/50 - 1/10,000 SEC 1Vpp Composite Output, 75 ohms MICF: (Mechanical IR Cut Filter) Electronic Photocell Controlled (EPC) 500 feet recognition / 350 feet identification 810nm (940nm Stealth optional) 14 long-range / 22 wide-angle Automatic Microprocessor Control (AMC) 20,000 hours (hand-welded) Extruded high strength aluminum Optically pure polycarbonate Eliminates IR bleed and ghosting White 300mm (W) x 158mm (H) x 354mm (L) 4.5kg / 9.9lbs Backlight, flickerless, gain control, white balance, etc Lens focus and adjustment Rotating wall mount to position camera Four heavy-duty cement screws included -50C to +50C (temperature controlled heater/blower) IP 66, NEMA 4x 24VAC (CE, ROHS, FCC) Max 26W (Heater and IR on) IR floods (30m-200m of additional IR) Pole mount adaptors Converts analog cameras into IP addressable servers NTSC or PAL
www.ascendentgroup.com | info@ascendentgroup.com

You might also like