Professional Documents
Culture Documents
A c c e s s o r i e s S p a r e p a r t s
r o F
o f in
a m r
n o i t
r o F
o f in
a m r
n o i t
Contents
General
Preliminary instructions / Security Recycling How to use this catalog
Documentation
Documentation
r o F
o f in
a m r
n o i t
7 9 10
11
13
15
17 18
19
21 22 23 24 25 26
- Front view (1/2) - Front view (2/2) - Rear view - Front view - Rear view (1/2) - Rear view (2/2)
Cabinet
Front view Rear view
27
29 30
A36961-A.doc 3/60
Contents
Print module
- General view - General view Exploded view (1/2) Exploded view (2/2)
Accessories
r o F
Basic stand Brackets Alarm lights Photocells Shaft encoders Anti-static brush, air blade kit Head drying kit, head protection
o f in
a m r
n o i t
33 34 35 36
31
37
38 40 43 45 47 48 50
51
53 54 55
A36961-A.doc 4/60
n i r o
n o General i t a m r o f
A36961-A.doc 5/60
General
r o F
o f in
a m r
n o i t
A36961-A.doc 6/60
Disconnect the printer from the electrical source before opening it or changing any of its components.
Liability
Imaje shall not be held responsible if the safety instructions are not followed, nor more generally if elementary safety rules are not applied when using and servicing Imaje equipment. This equipment is certified to comply with the department of labour regulations in force on the date of manufacture. Any consequences of modifications or repairs shall be the sole responsibility of the person carrying them out. The same applies to use not complying with Imaje specifications.
All Imaje printers have safety labels that meet the safety standards governing printer use compliant with Imaje recommendations. Any modification carried out may be counter to printer compliance and the relevant safety standards.
Health / Hygiene
Fire prevention
r o F
Therefore, Imaje cannot be held liable for any malfunction or damage caused by any modification of the use recommended by Imaje or for any incident arising from use of the printer for any purposes other than those for which it is designed. It is the sole responsibility of the user to take the precautions required by any use to which he or she puts the printer.
Please read the safety data sheet (MSDS) for the consumables used. For certain consumables: Wearing contact lenses when handling these consumables is strictly prohibited. Ink-resistant gloves and safety goggles are recommended during filling and cleaning operations.
o f in
a m r
n o i t
It is essential to comply with the instructions on the safety data sheet (MSDS) for the consumables used. CAUTION: For continued protection against possible fire, use only the ink/solvent mixtures specified by Imaje. If your printer uses flammable ink or make-up: Never leave containers containing ink, make-up or cleaning products, or ink-soaked rags (even dry) near the printer. Install a foam, CO2 or powder extinguisher immediately adjacent to the printer (maximum 10 meters). Never smoke near the printer. Affix a sign "NO SMOKING, FLAMMABLE INK" near the printer. Ensure that the printer is kept particularly clean, as dried ink deposits remain highly flammable. Drums of ink, make-up and cleaning solution must be closed and stored in a ventilated room.
A36961-A.doc 7/60
General
Environment
Operating temperature: On S7, S8 and 9040 lines: +5C to +45C (+41F to +113F) On 9020-9030 printers: +5C to +40C (+41F to +104F).
Humidity: 0 - 90% RH with no condensation. The use of certain inks may limit the temperature and humidity ranges (see the ink specification sheet). The printer must not be used in explosive atmospheres.
Installation
The printer and print head must be attached using appropriate mounting devices to ensure that they are perfectly stable. 9040: The printer must be attached to the floor using the designated mechanism provided (4 bolts, minimum diameter 6.mm, with washers, class 5.6 minimum, minimum pull-out resistance 300 daN). Nevertheless, if it is not possible to attach the printer to the floor, the Imaje stability kit must be installed on the printer. The print heads must be attached using appropriate mounting devices to ensure that they are perfectly stable. The printer must be installed in a ventilated location, away from any source of heat, flames or sparks. The printer and the print heads must be secured firmly in place with fastening devices. The printer installation on the production line must not generate any risks for staff. The operators work station faces the printer.
The printer must be connected to a single phase mains electricity network with earth ground, using the cable supplied with the printer. The standard plug on this cable must be easily accessible.
Use
Handling
r o F
The electrical and pneumatic installations upline of the printer must comply with applicable regulations. Machine electrical specifications: refer to the specification plate located near the power receptacle (S7 and S8 lines) or inside the door near the consumables (9020-9030 printers). When the printer or a part thereof is attached to a stand, the stand must be connected to earth ground. Earth ground all conducting parts not at a voltage reference and which are related to or close to the printer (metal frames, protective guards, etc.). For information on fastening an Imaje accessory, refer to the assembly instructions delivered with it.
The printer is designed for contact-free printing by projecting ink. Any other use of the printer is prohibited, and any consequences shall be under the entire responsibility of the user. Consumables (inks, make-up, cleaning products, servicing products) not produced by Imaje must not be used, and any consequences shall be under the entire responsibility of the user. Other types of Imaje consumables should not be used without Imajes prior approval, and any consequences shall be under the entire responsibility of the user.
o f in
a m r
n o i t
When the printer contains consumables, it should not be tilted and should only be moved vertically. Totally drain the printer before moving it to a non-vertical position.
Servicing
Disconnect the printer from the mains before any operations requiring components to be removed or exchanged. Use appropriate tools for any work on the electrical and hydraulic circuits. After each maintenance operation, the waste recepticles used should be emptied and cleaned. Do not leave rags soaked with consumables near the printer. We recommend that repairs be carried out only by staff who have received technical training from Imaje.
A36961-A.doc 8/60
General Recycling
The equipment described below is industrial equipment, and therefore cannot be recycled or recovered as household waste but must be processed using special methods, as shown by the symbol below:
The following table indicates some of the methods available for recycling machines when they reach the end of their life cycle. These methods are shown for guidance purposes only. Other more specialized processes may be used instead of those indicated. Please do not hesitate to contact your Imaje representative for further information.
Accumulators and batteries used in the equipment must be treated using specialized methods.
r o F
If the equipment is not dismantled on site, the following information must be forwarded to the service-provider responsible for this operation. Method Material 100% recyclable using any metal processing method. These items consist of plastic, metal and composite materials which are impregnated with or contain ink. Recommended method: energy recovery. energy recovery, recovery of electrical material, recovery of metals. CAUTION : Electronic circuit board present (see 4). Recommended method: Recovery and treatment of electronic waste (computers, televisions, etc.).
o f in
a m r
n o i t
A36961-A.doc 9/60
Type
r o F
How to order
Usage
Replacement parts are available under the following conditions: a reconditioned part contains recycled components, the defective original part is returned to IMAJE and becomes the property of IMAJE, the defective original part has not been modified or damaged and no component has been removed, proper use has been made of the defective original part and the maintenance instructions have been complied with, cleaning and draining procedures for the defective original part have been followed.
Orders may be sent by mail, fax or telephone. Written confirmation is required in the case of telephone orders. To order parts, contact the IMAJE representative. The following information should be shown on orders for replacement parts or accessories: part reference number, description, quantity required, required delivery date, delivery instructions, purchase order number.
o f in
a m r
n o i t
For wide variety of application For use in difficult environments For use on dark substrate For High Speed marking
A36961-A.doc 10/60
n o Documentation i t a m r o f n i r o F
A36961-A.doc 11/60
Documentation
r o F
o f in
a m r
n o i t
A36961-A.doc 12/60
Documentation
Documentation
Cdrom
This Cdrom includes the entire range of documentation for 9040, 9040 IP65, 9040 Contrast and 9040S in PDF format, i.e. User manual, Quick guide, Spare parts catalog, Manual for serial interfaces, Instructions for accessories and space floor plans in DXF format. Part number
A36989
Description
Instruction manual
The Instruction Manual complies with European Directive 98/37/EC, and is translated into all EU languages, as well as into Japanese, Chinese and Taiwanese. Part number
A19919
Catalog
User manual
r o F
Part number
A36960 A36961 A36962
o f in
Description
a m r
n o i t
This manual describes all user functions, technical characteristics and preventive maintenance. Part number
A36950 A36951 A36952 A36953 A36954 A36955 A36956 A36957 A36958 A36959 A36963 A36964
Description
Printer manual - French Printer manual - English Printer manual - Spanish Printer manual - German Printer manual - Italian Printer manual - Portuguese Printer manual - Dutch Printer manual - Brazilian Printer manual - Chinese Printer manual - Japanese Printer manual - Korean Printer manual - Swedish
A36961-A.doc 13/60
Documentation
Manual for serial interface
This manual describes the serial and parallel interfaces Part number
A36980 A36981
Description
Quick guide
This Quick guide describes basic functions Part number
A36970 A36971 A36972 A36973 A36974 A36975 A36976 A36977 A36978 A36979 A36982 A36983 A36984 A36985 A36986 A36987 A36988 A36995 A36942 A36943 A36944 A36945 A36946 A36947 A36948 A36949 A36965 A36966 A36967 A36968 A36969
Description
r o F
o f in
Quick guide - French Quick guide - English Quick guide - Spanish Quick guide - Brazilian Quick guide - German Quick guide - Italian Quick guide - Portuguese Quick guide - Dutch Quick guide - Chinese Quick guide - Japanese Quick guide - Korean Quick guide - Finnish Quick guide - Danish Quick guide - Norwegian Quick guide - Hungarian Quick guide - Polish Quick guide - Slovenian Quick guide - Swedish Quick guide - Czech Quick guide - Croatian Quick guide - Greek Quick guide - Turkish Quick guide - Russian Quick guide - Bulgarian Quick guide - Iranian Quick guide - Arabic Quick guide - Indonesian Quick guide - Thai Quick guide - Hebrew Quick guide - Vietnamese Quick guide - Taiwanese
a m r
n o i t
A36961-A.doc 14/60
r o F
r o F
o f in
a m r
n o i t
A36961-A.doc 16/60
Item 1 1 1 1 1 2 3 4 5 6 7 8 9 9
r o F
ENM36266 ENM36389 ENM36390 ENM36388 ENM37076 ENM37236 ENM36831 ENM37235 A27126 ENM36829 ENM36830 ENM36801 ENM36799
Part number
o f in
Display LCD
a m r
n o i t
Description
Keyboard - Latin Keyboard - Arabic Keyboard - Chinese Keyboard - Cyrillic Keyboard - Hebrew Board - backlight display converter Ribbon cable - Bottom of mainboard / display
ENM36929 (ENR36929)
Board - PC module Board - PCMCIA - ATA Flat Cable - V24/RS232 - 2 Heads Flat Cable - V24/RS232 - 1 Head Board - Extension - RS232 - Option Board - Extension - Ethernet - Option
A36961-A.doc 17/60
Item 1 2 3 4 4 4 4 4 5 6 7 8 9 10
r o F
ENM36610 ENM16586 ENM36680 ENM36681 ENM36682 ENM36470 ENM36683 ENM36684 ENM5936 ENM14123 ENM10298 ENM36790 ENM36789 ENM36793
Part number
o f in
10 3
Description
Main Board - For Safety level block EHT block
a m r
1 2
n o i t
7
Board - Power supply - Auto switched - 110 V-220 V Board - Stirring motor - For
Main Board - Single Jet - 1 Head Main Board - Twinjet - 1 Head Main Board - Single Jet - 2 Heads Main Board - Twinjet - 2 Heads Battery - Lithium - 3V 500 mA
Board - Industrial interface - With parallel interface - For 2 head printer Board - Industrial interface - Without parallel interface - For 1 head printer Ribbon cable - Bottom of mainboard/industrial interface
A36961-A.doc 18/60
r o F
o f in
a m r
n o i t
A36961-A.doc 20/60
17 13 14
16
4 5 3
Item 1 2 3 4 5 6 7 8 9 10 11 11 12 13 14 15
r o F
1 2
ENM20194 ENM5934 ENM4250 ENM4256 ENM4255 ENM4472 ENM4331 ENM4326 ENM4324 ENM5713 ENM20342 ENM17662 ENM20215 ENM10133 ENM5703 ENM4336
Part number
o f in
15 8 9 12 7 9 11 10 6 27
19
a m r
23 22 26
21
n o i t
18 28 24
25
Description
Anti-pulse bellows Cartridge - Ink filter - With seal
Seal (x 5) - Oring - 64.63 x 3.53 Screw (x20) - Stainless steel - Chc M6 x 10 Seal (x 5) - Oring - 6 x 1 Connector (x5) - Barbed - M5 x 4.8 Washer (x20) - Stainless steel - Serrated - 4 Washer (x20) - Serrated - 4 Screw (x20) - Stainless steel - Chc M4 x 16 Seal (x 5) - Oring - 23 x 2.5 Sensor - Pressure/temperature - G and M head Sensor - Pressure - P head Interface - Pressure/temperature Electrovalves block - 2.7 - 2.7 - 2.7 - 1.6 Screw (x20) - Stainless steel - Chc M4 x20 Screw (x20) - Stainless steel - Chc M4 x 24
A36961-A.doc 21/60
17 13 14
16
4 5 3
Item 16 16 17 18 19 20 21 22 23 24 25 26 27 27 28
r o F
1 2
ENM37081 ENM37082 ENM6989 ENM5745 ENM4485 ENM20212 ENM36702 ENM5629 ENM36322 ENM26966 ENM27330 ENM4255 ENM27192 ENM16208 ENM27275
Part number
o f in
15 8 9 12 7 9 11 10 6 27
19
a m r
23 22 26
21
n o i t
18 28 24
25
Description
Tank - Ink - DC - For 1 head Tank - Ink - DC - For 2 heads
Label - Ink (x 3) - Additive (x 3) Plug (x 10) - Additive/ink tank Plug (x 5) - Draining Fan - Condenser Calibrated tube - Viscosimeter supply Pump - pressure - Standard ink - G and M head Magnetic coupling - DC motor Motor - DC Connector Banjo - Simple - 2.7 Seal (x5) - Oring - 6 x 1 Restriction (x 5) - 0.7 - Tube 2.7 Restriction (x 10) - 0.3 - Tube 2.7 Strained - Ink tank - With seal
A36961-A.doc 22/60
- Rear view
Item 1 2 2 3 4 5 6 7 8 9 10 11
r o F
8 10
ENM16157 ENM26967 ENM34658 ENM7788 ENM4249 ENM16891 ENM26966 ENM36322 ENM27186 ENM27330 ENM4255 ENM10195
Part number
o f in
10 9 7
Viscosimeter Motor - DC
a m r
11 6
n o i t
Description
Condenser - With seal Harness - Ink circuit - DC - For 2 heads Harness - Ink circuit - DC - For 1 head
Magnetic coupling - DC motor Connector - Banjo - Double - 2.7 Connector - Banjo - Simple - 2.7 Seal (x 5) - Oring - 6 x 1 Cable clamp fifting (x100) - 2,5 x 100
A36961-A.doc 23/60
3 16 15 14 12
13
10
Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
r o F
11
ENM6234 ENM6246 ENM5745 ENM6256 ENM5553 ENM4485 ENM4256 ENM6989 ENM11428 ENM6247 ENM4339 ENM7599 ENM4337 ENM7765 ENM7775 ENM7766
Part number
o f in
6
1
a m r
2
n o i t
5
Description
Ink circuit - For Tank - Ink
Plug (x 10) - Additive/ink tank Filter - Ink Cartridge - Ink filter - With seals Plug (x 5) - Draining Screw (x20) - Stainless steel - Chc M6 x 10 Label - Ink (x 3) - Additive (x 3) Stirring bar (x2) Strainer - With seal Seal (x 5) - Flat - 20 x 30 x 2 Motor - Stirring Screw (x20) - Stainless steel - Chc M3 x 6 Filter - Coalescent - With ring Oring (x 4) 1/8 - (x 8) Connector (x 5) - -
A36961-A.doc 24/60
17 1 16
6 18 7 5
Item 1 2 3 4 5 6 7 8 9 10 11 12
r o F
12 11
ENM6254 ENM5713 ENM20342 ENM4324 ENM5703 ENM4336 ST10077 ENM7591 ENM7592 ENM7590 ENM7593 ENM10133
Part number
o f in
13 14
a m r
4 8
15
n o i t
3 19 10 9 10
Description
Harness - Ink circuit - For
Cell - Pressure - G and M head Seal (x 5) - Oring - 23 x 2.5 Screw (x20) - Stainless steel - Chc M4 x 16 Electrovalves block - 2.7 - 2.7 - 2.7 - 1.6 Screw (x20) - Stainless steel - Chc M4 x 20 Screw (x20) - Stainless steel - Chc M4 x 24 Calibrated tube Restriction (x 5) - 0.3 m Restriction (x 5) 0.4 m Plug - Viscometer Seal (x 5) - Oring - 29.45 x 1
A36961-A.doc 25/60
17 1 16
6 18 7 5
Item 13 14 15 16 17 18 19
r o F
12 11
ENM10086 ENM4246 ENM7765 ENM7767 ENM4262 ENM7775 ENM25979
Part number
o f in
13 14
a m r
4 8
15
n o i t
3 19 10 9 10
Description
Electrovalve - Viscometer Screw (x20) - Stainless steel - Chc M3 x 10 Filter - Coalescent - With ring Oring (x 4) 1/8 - (x 8) Connector (x 5) - - 1/8 Seal (x 5) - Oring - 40 x 2.5 Pressure sensor box - without sensor
A36961-A.doc 26/60
n i r o
n o Cabinet i t a m r o f
A36961-A.doc 27/60
Cabinet
r o F
o f in
a m r
n o i t
A36961-A.doc 28/60
3 1 2 8
Item 1 2 3 4 5 6 7 8 9 10 11 12 12 13 14
r o F
14 13
ENM36795 ENM20498 ENM16215 ENM36796 A12997 A12998 ENM16203 ENM37083 ENM37084 ENM20238 ENM34410 ENM34411 ENM36300 ENM6689 ENM16209
Part number
o f in
Filter - 5 m Fan
a m r
10 6 7 12
,
n o i t
5 9 11 4
,
Description
Air treatment unit - For Pressurization switch - For Electrovalve - For Filter assembly - 0.1 m - With seal
Plant air kit - For Filter - 0.03 m Filter cartridge - 0.1 m - With seal Manometer gauge - Vacuum Electrovalve - Equipped Seal - Oring - 10 x 1 Filter screen - 14 m - With seals Filter screen - 32 m - With seals - For Protected grid - Fan
A36961-A.doc 29/60
1 2 3 4 5 6 7
10
Item 1 2 3 4 5 6 7 8 9 10 11
r o F
8 9
A35319 A35320 A35321 A35323 A35324 A35325 A35326 A35327 ENM5393 A16566 A35322
Part number
o f in
11
a m r
n o i t
Description
Power cord kit - CEE standard Power cord kit - US standard Power cord kit - UK standard Power cord kit - Oceanic standard Power cord kit - Israeli standard Power cord kit - Swiss standard Power cord kit - India & South African standard Power cord kit - Danish standard Power cord kit - Chinese standard Fuse (x10) - 4A - Slow blow Connector - Plant air - 1/8G male - female - With connector barbed
A36961-A.doc 30/60
n o Print module i t a m r o f n i r o
A36961-A.doc 31/60
Print module
r o F
o f in
a m r
n o i t
A36961-A.doc 32/60
Split electrode
Flat electrode
M head
G head
For printer :
r o F
, A37429 A37430 EN6266 A37432 A37433
Single jet
Part number
o f in
a m r
Twinjet
n o i t
1 2 3
Description
Print module - Single jet - G head - 3 m - Flat electrode Print module - Twinjet - G head - 3 m - Flat electrode Print module - Single jet - G head - 5 m - Flat electrode Print module - Twinjet - G head - 5 m - Flat electrode Print module - Single jet - G head - 8.35 m - Flat electrode Print module - Twinjet - G head - 8.35 m - Flat electrode Print module - Single jet - M head - 3 m - Split electrode Print module - Twinjet - M head - 3 m - Split electrode Print module - Single jet - P head - 3 m - Split electrode
ENM35370 (ENR35370) ENM35372 (ENR35372) ENM35374 (ENR35374) ENM35373 (ENR35373) ENM35371 (ENR35371)
Item 1 1 2 3
Option - 5 m angled conduit - G head Option - 8 m angled conduit - G head Option - Angled head - 3 m, 5 m, 8 m - G head - M head Option - 5 m angled conduit - Angled head Option - Flat electrode - Single jet - M head for 5139 ink Option - Flat electrode - Twinjet - M head for 5139 ink A36961-A.doc 33/60
A37429 + EN6266
M head
For
r o F
G head
printer printer
Part number
o f in
Single jet
Description
a m r
Split electrode
Flat electrode
n o i t
Twinjet
Print module - Single jet - G head - 3 m - Flat electrode Print module - Twinjet - G head - 3 m - Flat electrode Print module - Single jet - M head - 3 m - Split electrode Print module - Twinjet - M head - 3 m - Split electrode
For
ENM36872 (ENR36872)
NOTE: When ordering a print module, please specify the part number of the ink used. Please order the required options when you order the print module.
* See Part Exchange Program in How to use this catalog
A36961-A.doc 34/60
9 1 3 4 11 12 2
Item 1 2 3 4 5 5 6 7 8 9 10 10 11 12
r o F
5
ENM6180 ENM6179 ENM6588 ENM36807 ENM15885 ENM15886 ENM5257 ENM6930 ENM6007 ENM37054 ENM37055 ENM6405 ENM5673 ENM16713
Part number
o f in
13 19 14
Top cover
a m r
2 15 16
n o i t
18 3 18 17 3
Description
Cover - Complete (front cover + 2 rear covers, seals and screws) Seal (x3) - (1 front seal + 2 rear seals) Screw (x10) - Stainless steel - Chc M2 x 6 Head cover - G head - Head with flat electrode Head cover - M head - Head with flat electrode Magnet - Square - 10x10 Head cover - Head with split electrode Magnet (x10) - Cylindrical Board - Phase detection amplification Board - Resonator supply - Single jet Board - Resonator supply - Twinjet Protector - Resonator Seal - Oring - 3.2 x 0.5
A36961-A.doc 35/60
9 1 3 4 11 12 2
Item 13 13 13 13 14 14 14 15 16 17 18 19 19 19
r o F
5
ENM7570 ENM7571 ENM5263 ENM5261 ENM17357 ENM17358 ENM17568 ENM36316 ENM35300 ENM6206 ENM4345 ENM37519 ENM37521 ENM37526
Part number
o f in
13 19 14
a m r
2 15 16
, ,
n o i t
18 3 18 17 3
- For all P head - For all P head , , - For - For M
Description
Gutter block - Single jet - For Gutter block - Twinjet - For Gutter block - Single jet - For M and G head Gutter block - Twinjet - For and G head
Protector - Anti-clogging (x 3) - G head Protector - Anti-clogging (x 3) - M head Protector - Anti-clogging (x 3) - P head Valve - One way - for twinjet - for 8 m Valve - One way - Make up Screw (x 10) - knurled - Aluminium - M6 Screw (x 10) - Stainless steel - Chc M2 x 8 Modulation assembly - G head Modulation assembly - M head Modulation assembly - P head
A36961-A.doc 36/60
r o F
n o Accessories i t a m r o f in
A36961-A.doc 37/60
60 x 60 mm
812m m
0m 60
45 x 45 mm
r o F
37 0
59 3
mm
o f in
.1
564m
a m r
40 mm
m
n o i t
1400 mm
1731mm
1 inch = 25.4 mm
A36961-A.doc 38/60
Accessories
9 5
4 6 8
Item 1 2 3 4 5 6 7 8 9 10 11
r o F
1
A17641 A28473 EA28453 EN6450 A17974 EN10013 EN5343 EN6706 A34798 A28457 A36925
Part number
o f in
3
10
a m r
11 2
n o i t
Description
Stand - aluminium - Complete (includes 3,4,5,6) Ground strap (x 10 m) Maintenance tray Head support - Servicing position Head support - Aluminum steel stand - With rotation Fasteners and clip - Conduit Support - Ground strap Mounting bracket - Head support - Servicing position Mounting bracket - Maintenance tray Head support - Stainless steel stand - With rotation Stand - Stainless steel - Complete (includes 3,4,5,9,10,11)
A36961-A.doc 39/60
Accessories Brackets
1 4
Item 1 2 3 4 5 6 7 8 9 10 11
r o F
7
EN5915 EN5914 EN4735 EN6231 A14806 EN6230 EN10012 ENM7329 EN4768 A11188 EN6637
Part number
o f in
8 9
Nut
a m r
10
n o i t
5 11
Description
Head mounting kit - 2 axis precision adjustment Adaptater kit - Round rod to profile Head bracket - 2 axis precision adjustment Head bracket - Angled head - Servicing position
Head bracket - Horizontal head Head bracket - Angled head - Fixed position Head bracket - 1 axis precision adjustment Head bracket - Long Mounting kit - Second head Head bracket - Retractable
A36961-A.doc 40/60
Accessories
Item 1 2 3 4 5
r o F
EN6163 ST1123 EN6450 EN6051 A37431
Part number
o f in
5
a m r
n o i t
1 3
Description
A36961-A.doc 41/60
30 mm
30 mm
A (mm)
2 elements A 220 mm 3 elements 300 335
Technical specifications
Model A34791 A34792 Rated Voltage 24V AC/DC 24V AC/DC
r o F
17 mm 3000 mm
o f in
6.2 mm 80 mm
a m r
23 mm 10 mm 13.1 mm 39.9 mm 6.2 mm 38 mm
Support en L Lb racket
n o i t
21.5 mm
35
10 mm
80 mm
A35262-C.doc 42/2
Accessories
Item 1 2 3 4
Part number
A36285 A34791 A28466 A34792
r o F
o f in
a m r
3
n o i t
4
Description
Alarm - Audible - 24V Alarm - Illuminated - 24V - 2 elements (Red / Orange) Alarm - Illuminated - 24V - 3 elements (Red / Green / Orange) Mounting kit - Alarm
A36961-A.doc 43/60
Accessories
Photocells
Dimensions
Reflex photocell
Proximity photocell
Fiber optic
Technical specifications
r o F
o f in
0 1,70 m 10 -30 VDC
35 mA
17
32
a m r
7
n o i t
Unit : mm 1inch = 25.4 mm
Optic fiber
0 -55 mm IP65 Fiber = 1 m Chrom platted metal
Reflex photocell
Proximity photocell
0 -200 mm 10 -30 VDC
30 mA
200 mA
1ms 1ms
200 mA
0,5ms 0,5ms
Desactivation time Protection class Cable lenght Case material Output Commutation Protected against short circuits Protected against polarity inversions Temperature range
- 25 C / + 65 C
A35262-C.doc 44/3
Accessories
6m
3
4
1m
Item
1 2 3 4 5 6 7
r o F
5
Part number
o f in
18.5mm 37mm
37 mm
a m r
6
n o i t
7
1 inch = 25.4 mm
6.5mm
m .5m 29
Description
Photocell - Reflex - With connector Reflector Photocell - Proximity - With connector Glass protector Optical cable (used with proximity photocell) Mounting bracket - Photocell/optical cable Support - Photocell
A35262-C.doc 45/3
Accessories
Shaft encoders
Dimensions
Cable Lg 5 m
Mechanical specifications
Material
Maximal loads
Acceleration Continuous speed Weight Relative humidity IP (EN 60529) Cable length
Electrical specifications
Supply Consumption Intensity per channel Protection against short circuits Protection against reverse polarity Operating temperature Resolution A35356 5 to 30 VDC 75mA 40mA yes yes -30C to 100C 5000 pulses/rev A35452 5 to 30 VDC 75mA 40mA yes yes -30C to 70C 2500 to 40000 pulses/rev
r o F
o f in
a m r
n o i t
Cover : zinc alloy Body: aluminium Shaft : Stainless steel Axial : 50 N Radial : 100 N 5 2 Max 1.10 rad.sMax 9000 tr/min (rpm) 300 g 98 % (without condensation) IP 65 5m
A35262-C.doc 46/3
Accessories
Item
1 1 2 3 4 5 6 7
r o F
A35356 A35452 A10530 A11169 A11168 EN6367 ENM6363 ENM11166
Part number
o f in
3
a m r
n o i t
6
Description
Shaft encoder - 5000 pulses/rev - with connector Programmable shaft encoder - With connector Encoder wheel - Spiked - 200 mm (8 in.) Encoder wheel - Smooth - 200 mm (8 in.) Flexible coupling Mounting bracket - encoder - With spring Bracket - Shaft encoder Mounting bracket - Encoder - Fixed
A35262-C.doc 47/3
Accessories
The brush, which is 70 mm (2.76 in.) long, is mounted crosswise 50 mm (1.97 in.) in front of the head. It should never be more than 1mm (0.04 in.) from the object and should preferably be in contact with the object. It must also be grounded. Air blade kit The air blade is used to dry: The substrate prior to printing, The ink after to printing.
Blades are available in two lengths: 6 (153 mm) and 18 (457 mm). (10 and 60 mm).
The space between the blade and the object may be adjusted (between 0.4 and 2 in.)
r o F
The air blade kit includes the blade, filters and a bar to remove the head and couplings necessary for installation. The connector on the kits inlet is G female or BSP 10 mm. Check your plant air for the following characteristics: 6 blade (153 mm): air flow and pressure at the kits input must be at least 300 l/min. (10.5 scfm) at 1.8 bar (26.1 PSI) Use the cross-shaped bars to attach the air blade to the Imaje stand.
o f in
a m r
n o i t
18 blade (457 mm): air flow and pressure at the kits input must be at least 800 l/min. (28.25 scfm) at 1.8 bar (26.1 PSI)
Pressure at the kits input must be at least 3 bar (43.5 PSI) Operating temperature must be between 14F and 167F (-10C and +75C) The air must be clean, dry and oil free. It must contain at the most: 0.12 grams of water/m3 (0.15 once of water/cubic foot), 1PPM of oil and size of particle <5 m.
A36961-A.doc 48/60
Accessories
Part number
6
Item 1 2 2 3 4 5 6
Part number
A13939 A17287
A17796
r o F
o f in
5
Flushing tool
a m r
3 2
,
n o i t
4
Description
Antistatic brush Air blade kit - 457 mm (18 in.) Air blade kit - 153 mm (6 in.) Filter - Air blade - Main filter - 5 m Filter - Air blade - Secondary filter - 0.01 m
A36961-A.doc 49/60
Accessories
1 2 3 4 5
Item
r o F
EN7696 A34390 A16601 ENM16508 ENM16243
o f in
Seal
a m r
5
n o i t
147,5 mm 65 mm
Part number
Description
Drying kit - Head Head protection - Front mounting - With servicing sleeve Head protection - Side mounting - With servicing sleeve Magnet (x 5)
A36961-A.doc 50/60
r o F
o f in
a m r
n o i t
A36961-A.doc 52/60
Safety kit
Part number
3 2
5 6
Item
1 2
Referenced materials in the safety kit may be ordered separately A17955 Safety glasses Eye wash - Hand held Eye - Cup - Individual Gloves (x 20) - Latex Hand cleaner - Liquid - 125 ml Tee shirt - Black - Imaje - Size M Tee shirt - Black - Imaje - Size L Tee shirt - Black - Imaje - Size XL Tee shirt - Black - Imaje - Size XXL
r o F
A17538 ENM4491 A20872 A20873 A20874 A20875
Part number
o f in
1
a m r
n o i t
7
Description
Safety kit (includes 2,3,4,5)
5 7 7 7 7
A36961-A.doc 53/60
Tools
Part number
4 2 3 12
13 14
Item
1 2 3 4 5 6 7 8 9 10 11 12 13 14
Referenced materials in the suitcase-user may be ordered separately (see list below) A17955 A10413 A11007 ENM6317 A10864 A18631 Safety glasses Magnifier - Magnification x12 Beaker - 250 ml Cleaning flask Head dryer Allen wrench - 3/32 Allen wrench - 2 mm Allen wrench - 1.5 mm Connector - Ringed - M6 - 1/8 - Teflon Screwdriver - 2.5 x 50 Adjustment tool - Cannon - Punch - 0.95 Screwdriver - Flat 1.5 - Cannon holder cam Wrench - Cannon - Hexagonal key - 5mm
r o F
A27831 A12027 ENM5932 ENM14434
Part number
o f in
6 10 9 8 7 11
a m r
n o i t
Description
Suitcase-user
A36961-A.doc 54/60
Options
Description
9040 printers offer specific operating modes which can be obtained by selecting options. The performance of 9040 printers may be increased by adding options. 1 - Message selection option
Changes the message to be printed via a parallel interface. This option requires the parallel interface option. The printer automatically selects the next message in the library and then prints it. 2 - Message inversion option
The D7 input on the industrial interface is used as a reverse direction command for the message. This option requires the parallel interface.
Installation
r o F
1 2
Item
1 2
o f in
a m r
n o i t
Part number
A16673 A16684
Description
Option - message selection Option - message inversion
A36961-A.doc 55/60
r o F
o f in
a m r
n o i t
A36961-A.doc 56/60
Revision
Catalog 9040 Range Manuals update Mod. let. A corresponds to the first edition of this manual. The mod. letter changes with every modification. Document mod. Let. A
Software version
r o F
o f in
a m r
J05/M05
n o i t
This document was produced in French. The French version is deemed to be the only official version and shall constitute the authentic document in the event of any dispute. Imaje reserves the right to change the technical characteristics of its products without prior notice. Reproduction of this document is prohibited, either in full or in part. Photos and drawings are not binding. Edition anglaise.
A36961-A.doc 57/60
r o F
o f in
a m r
n o i t
r o F
o f in
a m r
n o i t
r o F
A36961-A
Imaje S.A. Headquarter : 9, rue Gaspard Monge BP 110 26501 Bourg-ls-Valence Cedex France Tel.: (33) 04 75 75 55 00 Fax: (33) 04 75 82 98 10 http:// www.imaje.com
o f in
a m r
n o i t