You are on page 1of 2

Magnetic Switch

JSNY7

Approvals:

Application:
Gates Hatches Position control

Features
Small size IP 67

Switch operation description The magnetic switch is designed to operate in dirty industrial environ ments and is certified to the highest level of safety regulation when working together with a suitable ABB Jokab Safety safety relay or Safety-PLC Pluto. The magnetic switch is small and resistant to both dirt and water, and has no dust collecting cavities making it usefull in environments where hygiene is paramount. The small size of the switch makes it easy to position and hide on gates and hatches. The magnetic switch has a long working life since no mechanical contact is made during operation. Contacts The magnetic switch has one closing and one opening contact. Both contacts have to be monitored. The contacts may be monitored by either the RT9 safety relay or other suitable relays in the new RT-series, i.e. RT6, RT9 or Safety PLC Pluto. Protection from unauthorised or incidental access To avoid unauthorised operation of the JSNY7 switch it is only possible to actuate the JSNY7R with the coded magnet, JSNY7M. Other magnets, screwdrivers and tools have no affect on the switch contacts. Safety level The JSNY7 is approved to the highest level of safety regulations,PLe according to EN ISO 13849-1 together with safety relay in the RT-series or Pluto PLC.
9:10

JSNY7 is resistant to both dirt and water.

Regulations and Standards The JSNY7 is designed and approved in accordance with appropriate directives and standards. See technical data.

www.jokabsafety.com

Technical data JSNY7


Manufacturer Article number/ordering data JSNY7R-3 Magnetic switch 3 m cable JSNY7R-6 Magnetic switch 6 m cable JSNY7R-10 Magnetic switch 10 m cable JSNY7M Magnetic switch Colour Enclosure/Cover Supply voltage max Switch current max Max switching frequency Mechanical life Operating temperature range Connection ABB AB/Jokab Safety, Sweden

B10d

JSNY 7R-3: 3,00107 JSNY 7R-6: 3,00107 JSNY 7R-10: 3,00107 2006/42/EG EN ISO 12100 1/2, EN 954-1, EN 60204-1, EN ISO 13849-1, EN 1088, GS-ET 15

1 2 3 4 5

Conformity 2TLJ020023R0000 2TLJ020023R0100 2TLJ020023R0200 2TLJ020024R0000 Black 30 VDC 100 mA 3 x 108 switch operations, depending on load -5C to +70C (moveable) -20C to +70C (fixed) Cable 4.5, 4x0.25 mm2, 3 meter ; PVC (other lengths upon request) Min. switch-on point 5 mm Max. switch-off point 14 mm Coded magnet: 32 g Sensor with 3m cable: 133 g IP67
grey 25 10,7 7,2 2,5 4,5 6,5

mm 68 78 88 14 5 0

PA 6 (UL94-VO)

1 Hz

Electrical connection Two-channel switching, high safety level.


black brown

Switching point Weight Protection class

13

6 7

blue

Electrical connection description - JSNY7


Electrical Connection example Three JSNY7 connected to RT6 safety relay. NOTE! Safety components drawn in released position. NOTE! This solution with 3 magnetic switches only complies with category 3 as per EN 954-1/EN ISO 13849-1. To reach highest level of safety only one magnetic switch should be connected to the safety relay.

8 9 10 11 12 13

Door 1

Door 2

Door 3

www.jokabsafety.com

9:11

14

You might also like