Maintenance schedule compressors :

Maintenance and testing work at (hours): Check v-belt and fan blades Air density test Automatic condensate drain, check functionality, change parts if necessary Check bearing and stud bolt (replace if necessary) Check cylinders (replace if necessary) Check intermediate pressure and oil pressure Check oil level Change oil (mineral) Change oil (synthetic) Check pistons and piston and sleeve assembly Check piston rings, if necessary replace Clean separator, empty condensate collector Check suction-, pressure valves Check temperature sensors, replace if necessary Exchange filter cartridge Exchange intake filter Exchange v-belt Exchange filter of oil/water separator Additional seals, o-rings (not included in maintenance kit) Leak test safety valves Measure temperature of compressor Measure pressure drop of ACD, setting times ACD, adjust if necessary Oil for oil change include (synthetic every 1000 operating hours!) Replace piston and sleeve assembly at the latest Renew seals, o-rings acc. to maintenance kit Check regulation of the pressure switch and PMV Replace suction-, pressure valves at the latest Test pressure vessel, record number of cycles Test monitoring/emergency functionality Visual inspection of cooler Change filters of intermediate separator Test of complete unit for leakages Test complete unit, final control., test run, prepare test report, put on test sticker
The maintenance interval start again after the last maintenance of this list.

500 x x x x x

1.000 1.500 2.000 2.500 3.000 3.500 4.000 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x

Monthly check (Option)

Special agreement

x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x
01.01.08

x x x

x x

x x x x x x x x x x x x x

x x x x x x x x x x x x x

x x x x x x x x x x x x x

x x x x x x x x x x x x x

x x x x x x x x x x x x