Professional Documents
Culture Documents
(13) Move to MSR mode-----------------------------------------------------------14 (14) Layer setting------------------------------------------------------------------14 Section 3. Sub Menu MSR Setting Guide--------------------------------------------15 (a)NEW (b) OPEN ---------------------------------------------------------------15~16 (c)SAVE------------------------------------------------------------------------------17 (d)Read MSR info------- -----------------------------------------------------------18 (e)Write MSR info------------------------------------------------------------------19 (f) Exit-------------------------------------------------------------------------------20 (g) MSR Module Setting-----------------------------------------------------------20~22
BTC SECU
www.btcsecu.co.kr/en
Main Menu
Key table Window
(6-1) Editing each new keytable code and MCR data on Pos keyboard, and then press SAVE or Save As as a file of PC,,, after that,,, just pull out a cable port from Ist Pospion KBD and connect a Cable port into another new POSpion >> OPEN at menu >> click a saved file >> READ >> WRITE, continue to do the same procedure for next POSpion KBD. (6-2) As other duplicating way, after writing keytable and MSR Info after editing all,,, continue to press >> Write the button of keytable/msr info >>(without saving/opening and reading a file) Write Keytable by repeatedly cable off and in with other new Pos keyboards. (7) Load Factory Setting: initialize all the data of keytable to the original one. In order to write its original keytable to POSpion KBD, press proceed Load Factory Setting >>(Do not press Read keytable/mcr info) and just Write keytable at menu or press same Icons at menu bar in the same order.
- Open the data file(abc.kbd)with Keytable which is saved previously or open your customized file in folder, and the Read and Write the same key table value to another Pos keyboard. - After Reading key-table, you can check the content of key-table by selecting at MENU [Edit] > [Key-table]. Save (Save As,,,) - Select menu [File] > [Save]
2.
Open - Select menu [file] > [Open] According to Screen Notification, when clicking the Yes button, Reading keytable data from Pos keyboard will be started automatically. 4. Write Key-table - Select menu [file] > [Write Key-table]
According to Screen Notification, when clicking the Yes button, Writing key-table data into Pos keyboard will be proceed automatically as below.
After placing mouse cursor on individual key and click the left button of mouse, and then optional button(Key code, Layer Index) will appear in screen. 6. Keytable - Select menu [Edit] > [Key-table] *. Key Code: enable to input any key code value. *. Layer Index: enable to assign its key as Layer Key.
- Layer Index *. Combo box of [Layer]; when you click different Layer index(0~3), different key layout Are appeared in screen, and editing Key code & layer Index are available here. *. [Clear Current Layer]: delete every visual key code at the current layer in screen. *. [Clear All]: delete all key code at all layers.
- Select Key Code in Sub Menu, then Dialogue of Key code will appear as below. *. Key code can be input by typing by clicking with mouse on virtual keyboard in below screen. *. 10 switchable language table; pls select your language on Cmbo Box.(USA, Germany, Denmark, Spain, Norway, UK, Hebrew, France, Finnish/Sweden, Turkish) according to your host OS language.
- Select Layer Index in sub menu, you can assign the key as Layer Index as below.
10
SECUPION PP301/302 PROGRAM MANUAL GUIDE 7. Sound Setting - Select menu [Edit] > [Sound Setting]
SECUPION PP301/302 PROGRAM MANUAL GUIDE 9. Reset - Select menu [Test Mode] > [Reset]
- Set all sound at once is available. (Mute/1/2/3) 8. Load Factory Setting - Select menu [Test Mode] > [Load Factory Setting]: Restore to factory setting value.
10. Firm Ware Version - Select Menu [Help] > [F/W Version] ; Read the current firmware version on Pos keyboard
11
12
SECUPION PP301/302 PROGRAM MANUAL GUIDE 11. Key Mapper Info. - Select menu [Help] > [About Pospion Key Mapper]
13. Move to MSR mode - Move to MSR mode from Keyboard Mode by click in Combo box as below.
14. Layer Setting - Change to another Layer by clicking in Combo box as below. 12. Change to Other Pos keyboard Model - Change to other Model by clicking Keyboard Model in Combo box as below. (Commend to Pos Keyboard and make a set of current layer(layer0 to layer3).
13
14
SECUPION PP301/302 PROGRAM MANUAL GUIDE b. Open - Select menu [File] > [Open]
a. NEW - Select menu [File] > [new] (initialize MSR Code data at the memory(Remove all code value of MSR)
- Open the MSR data file(abc.msr) from file of a host which is saved previously or open your customized file in folder, and the Read and Write the same MSR code data to another Pos keyboard.
15
16
SECUPION PP301/302 PROGRAM MANUAL GUIDE c. Save (Save As,,) - Select menu [File] > [Save]
SECUPION PP301/302 PROGRAM MANUAL GUIDE d. Read MSR info. - Select menu [File] > [Read MSR Info]
According to Screen Notification, when clicking the Yes button, Reading MSR data from Pos keyboard will be proceed automatically as below. - input Saving file name in blank, and then click Save button to store the MSR data configuration to the file.
17
18
SECUPION PP301/302 PROGRAM MANUAL GUIDE e. Write MSR Info - Select menu [File] > [Write MSR Info]
SECUPION PP301/302 PROGRAM MANUAL GUIDE f. Exit - Select menu [File] > [Exit]
- Exit the program According to Screen Notification, when clicking the Yes button, Writing MSR track data into Pos keyboard will be proceed automatically as below. g. MSR Module Setting - Select i-con of ISO module in menu and select one option you have in Pos keyboard.
19
20
SECUPION PP301/302 PROGRAM MANUAL GUIDE - Select menu [Edit] > [MSR Info]
User can select OS language in read circle and then press OKbutton, and input prefix, suffix by mouseclicking in said virtual keyboard.
- After selecting option of ISO module(iso1,iso2,iso3,iso1/2,iso2/3,iso1/2/3), Press MSR info, then MSR Dialogue will appear as below, all kinds of configuration are available to add prefix, suffix in MSR. When editing MSR code data, 1st, Please make combination of ISO track by clicking box button, based on built in MSR Module spec. 2nd, Set the option of Sound and Enter, 3 , Press a long bar at right side of Prefix, Suffix, in order to enter into Key Code Table. Now Key Code input window will be appeared on screen as below.
rd
h. All Sound Setting - Select menu [Edit] > [Sound setting] - Setting all sound of ISO1/2/3 at once is available. (Mute/1/2/3)
21
22