You are on page 1of 2

Models

WMIC2 / WMIC2A

Wireless Mic/Speaker System

System Includes:
Pole mounted speaker unit Clip-on Mic Miniature Transmitter Receiver and amp in speaker unit Lanyard Charging Adapter

Provides the instructor with added voice power so teachers can be heard by all. Improves retention and learning in the classroom. Features
Lightweight transmitter on lanyard with volume adjust Range of 55 feet without being blocked using RF at 2.4GHz (same as WiFi) Will automatically select any of 20 separate channels Comes complete with lapel mic, transmitter, and speaker unit Uses a rechargeable Li battery for 8 plus hours of operation Speaker unit can be easily attached to projector mount

Optional wall mounting

DUKANE CORP Audio Visual Products 2900 Dukane Drive, St. Charles, Illinois 60174 Toll-free: 888-245-1966 Fax: 630-584-5156 E-mail: avsales@dukane.com www.dukane.com/av WMIC2 Spec -03

New model WMIC2A has a 30 watt output


Optional wall mounting for speakers available

Models

WMIC2 / WMIC2A

Speaker Specifications Amplifier Wattage Output Speaker Spec. SPL (Sound pressure level) Fequency Response Dimension Weight Outlook Color Power Supply Audio In Safety Audio Auto Off Wireless Module Receiver (Built in speaker) Voltage Range Current Frequency Response Channel Frequency Match Sensitivity Output Resistance Output Voltage Transmitter Power Input Resistance Input Voltage Power System Audio In Priority Channel Audio Shift Dynamic Range @ 1KHz Separating Degree @ 1KHz Distortion THD Matching Distance Frequency Match Distance Battery Type Battery Time Battery Charge Time Safety Microphone Type Sensitivity Signal to Noise Ratio Maximum Input SPL Regulation CCC, SRRC, BSMI, NCC, CE, FCC Microphone Collar type -37db (f=1KHz, S.P.L=1Pa, 0dB=1V/Pa) 70dB 120dB (f=1KHz, THD<1%) < 1.5ms 81dB 90db 0.10% 2M < / Less than 7ft 30M (Free space) / 95 ft Lithium battery inside 8hr use at least 4hr from exhausted to full charge -85dBm (Min) 32 2Vp-p (Max) 10mW 10k 2.8Vp-p (Max) DC 5V (USB charge wire) MIC in / Audio in MIC first priority Transmitter (Wireless module) 3.6 ~ 5 V < 50 mA 2.4G ~ 2.483G 20 channels (Auto-match) GFSK Class D Amplifier WMIC2; 20W Stereo, WMIC2A ; 30W 2.75" 10W/8 x 2 full range high efficiency speaker and echo tube design 92dB/W 50Hz ~ 20kHz 254 x 250 x 80 mm 1.5 kg / 3.3 lbs White/black steel mesh DC12V/2A (Power adapter) 3.5mm to 3.5 L-type phone jack CE, FCC, BSMI, CCC 60 sec

Specifications
The system consists of a small light weight lanyard held transmitter with an attachable mic that sends the voice signal via a digital encoded bit stream at high speed to a receiver. The receiver converts the digital bits stream back to regular audio output sent to a 20/30 W stereo audio amplifier and speakers. This results in a conventional sound enhancement or voice augmentation system. There are 20 channels available from 2.400 to 2.480 GHz for operation.

*Projector not included

Lapel mic and mini transmitter

Pole speaker with receiver and audio amp inside

Carton size: 12.5 x 11.5 x 7 Carton wt: 4 lb Warranty: 1 year


Wt; 1.5 lb.
www.dukane.com/av Toll-free: 888-245-1966 Fax: 630-584-5156 E-mail: avsales@dukane.com

A wall mounting kit is available; part WMIC2-BRK

Carton; 1.2" x 3.4" x 7.7"

DUKANE CORP Audio Visual Products 2900 Dukane Drive St. Charles, Illinois 60174

You might also like