You are on page 1of 2

information of steel pipe,and method of application.The meaning of steel pipe.

Spiral steel process (1) the raw material is steel strip coil, wire, flux. Have to pass strict physical and chemical inspection before investment. (2) the strip head to tail docking, use single or double wire submerged arc welding, after rolled steel tube adopts automatic submerged arc welding repair welding. (3) before shaping, strip after flattening, cutting edge, Steel tube standard terminology edge planing, surface cleaning and flanging process. (4) on both sides of the electric contact pressure gauge control conveyor under the pressure of cylinder pressure, ensure the smooth delivery of strip steel. (5) the use of external control or internal control roll forming. (6) the weld gap control device to ensure that meet the requirements of welding seam clearance, pipe diameter, and quantity of the wrong side of weld gap are tightly controlled. (7) welding and welding are used within the United States Lincoln welding machine for single or double wire submerged arc welding, to obtain the stable welding specification. (8) after welding the weld passes the online continuous ultrasonic automatic meter check, ensure the spiral weld nondestructive testing coverage of 100%. If there are defects, automatic alarm and spray tags, production workers to adjust process parameters, in a timely manner to eliminate defects. (9) by air plasma cutting machine to cut the steel tube into single. Cut into single pole (10), after each batch of steel pipe in the first three root must carry on the strict check system, check the weld mechanical properties, chemical composition, amalgamation, steel tube surface quality as well as through the nondestructive flaw detection, ensure that qualified pipe process, can be formally put into production. (11) for acoustic detection on the weld mark parts, after manual ultrasonic and X-ray check, if there are defects, after repair, again through the nondestructive inspection, until defects have been eliminated. (12) strip steel butt weld and butyl type of fellowship with spiral api 5l pipe weld joint in the tube, all through the X ray films and television inspection. (13) of each steel pipe after hydrostatic pressure test, radial sealing for the pressure. Test

pressure and the time limit strictly policed by steel pipe hydraulic microcomputer testing device. The parameters automatically printed out. (14) pipe end machining, make the end verticality, slope Angle and the blunt edge to get accurate control.

You might also like