You are on page 1of 5

Item Picture

Mechanical Timer (TE-015-BAI) (BAI Series) Specifications: With switch knob & loading indicator 2- pin plug 3-hole socket Time Setting: Minimum: 15minutes Maximum: 24 hours Power Input: 220V ; 60Hz Power Output: 15Amax 3000 watts Dimension: 80x80x40 mm Weight: 140gms

Features: Energy Efficient Cost-saving 24 hours programmable mechanical timer With manual switch Compact and elegant design for easy operation

Package Content: 1 x Mechanical Timer

For better assistance on technical concerns, please call us on 666-4567, 666-4568, 232-1349, 09236598857, 09222444303, or log on to www.cdrking.com and care to chat with cdrking_onlinetech01@yahoo.com or cdrking_onlinetech02@yahoo.com.

For better assistance on technical concerns, please call us on 666-4567, 666-4568, 232-1349, 09236598857, 09222444303, or log on to www.cdrking.com and care to chat with cdrking_onlinetech01@yahoo.com or cdrking_onlinetech02@yahoo.com.

Automatic On:

1.

For your time guide, set the current time by turning the timer dial in clockwise direction & align it on the arrow in front of the timer to present time. NOTE: The time can be based if it is AM/PM.

2.

Push down the pins of the timer dial according to your desired working duration of the household appliance (every pin is equivalent to 15 minutes). For example you push down 3 pins the equivalent time is 45 minutes meaning that the appliance will work for 45 minutes. After 45 minutes the appliance will be in off state.

For better assistance on technical concerns, please call us on 666-4567, 666-4568, 232-1349, 09236598857, 09222444303, or log on to www.cdrking.com and care to chat with cdrking_onlinetech01@yahoo.com or cdrking_onlinetech02@yahoo.com.

3.

Slide the ON/TIMER switch located on the side of the unit to the TIMER position to enable the timer function.

4.

Plug your electrical device into the timer and plug the timer into the wall outlet. Electrical device must be set to ON position for the timer control to work properly.

Note: You may override operation of the timer by setting the RED ON/TIMER switch (located on the side) to ON. Be sure to set switch back to the timer (down position) for proper timer function. In case of power failure, reset the time of day as indicated in steps above.

Warning: Do not plug this timer into an extension cord or other electrical adapter. Plug directly into an electrical outlet. Do not connect this timer to appliances that contain heating elements (cooking appliances, heaters, irons, etc.) Failure of the timer to shut off such devices may lead to overheating and a potential fire. Do not plug in this timer if it is wet. Do not clean this timer when it is plugged in. Do not exceed the maximum ratings of the timer. Potential shock hazard: Keep out of reach of children.

For better assistance on technical concerns, please call us on 666-4567, 666-4568, 232-1349, 09236598857, 09222444303, or log on to www.cdrking.com and care to chat with cdrking_onlinetech01@yahoo.com or cdrking_onlinetech02@yahoo.com.

FAQs What is mechanical timer? A timer using a spring mechanism to determined a length of exposure. Accuracy of timing is not assumed in exposures of less than 1 second with a mechanical timer.

Is this timer advisable to use in heaters and iron? NO, these appliances contains heating elements

Is this battery operated? No

Warranty:

*** Note: Warranty is Void if seal is Broken/Missing/Tampered

For better assistance on technical concerns, please call us on 666-4567, 666-4568, 232-1349, 09236598857, 09222444303, or log on to www.cdrking.com and care to chat with cdrking_onlinetech01@yahoo.com or cdrking_onlinetech02@yahoo.com.

You might also like