Professional Documents
Culture Documents
Calgary, Alberta, Canada T2C 4T6 Phone: (403) 319-2333, Fax: (403) 319-2337 E-Mail: sales@dynawinch.com, Web Site: www.dynawinch.com
Table of Contents
Aluminum Van Truck Units Mast and Derrick Truck Units Wireline Skid Equipment Drawworks Winch Equipment Wireline Accessory Equipment
Section 1
Aluminum Van Body Truck Units Product Line Model Series Numbers
Section 1
The following series of aluminum van body units are base units where modifications or design changes can be made to better fit the wireline service applications.
4 x 2 Single Axle HD Slickline Van Unit with Single Split Drum Drawworks
Model SV1-120 series is a single axle heavy duty aluminum van unit for slickline service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
SV1- 120 S E R I E S
Features:
120 series van body design has small radius rear corner body style with tarpaulin roof cover over drawworks compartment 100% aluminum frame all welded construction All weather thermal insulation Light weight design Generous quantity of external storage compartments and racks Large all weather climate controlled operators cabin Ergonomic design control panel Low noise level Operators captains chair Measuring System: In-line measure heads or conventional measure heads
Mechanical or Electronic display meters Generator: 10 kw hydraulic drive generator Grease Injector: 5K hydraulic onboard grease injector system
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Van Dimensions:
5.45m L x 2.48m W (214 in L x 98 in W) Van dimensions may vary to best fit end users requirements
Pulling Power- Up to
4,300 kg
(9,500 lbs)
Drop Attachment: Independent hydraulic drive motor with quick disconnect coupling on drop spool. 3,000m of .092 line on drop spool Additional drum drive system options available to best meet specific service work applications.
SV1- 140 S E R I E S
Features:
140 series van design has flat enclosed roof body style over drawworks with double rear doors 100% aluminum frame all welded construction All weather thermal insulation Light weight design Generous quantity of external storage compartments and racks Large all weather climate controlled operators cabin Ergonomic design control panel Low noise level Operators captains chair Measuring System: In-line measure heads or conventional measure heads
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Van Dimensions:
5.45m L x 2.48m W (214 in L x 98 in W) Van dimensions may vary to best fit end users requirements
Pulling Power- Up to
4,000 kg
(9,000 lbs)
Drop Attachment: Independent hydraulic drive motor with quick disconnect chain drive on drop spool. 3,000m of .092 line on drop spool Additional drum drive system options available to best meet specific service work applications.
4 x 2 Single Axle Slickline Van (Bomb) Unit with Single Drop Spool Drawworks
Model SV1-160 series Bomb (drop spool) unit is a single axle van unit for slickline service work applications with a drop off drum spool system. This unit is designed to operate in an oilfield environment and can be modified to perform other wireline service work applications.
SV1-160 SERIES
Features:
160 series van body design has stepped down enclosed roof style over drawworks with double rear doors 100% aluminum frame all welded construction Light weight design Generous quantity of external storage compartments and racks All weather climate controlled operators cabin Ergonomic design control panel Low noise level Operators captains chair 110V AC Power: 3,000 watt inverter AC systems Drop Spools: Quick removable drop off drum spool system with on-board swing out jib-crane with DC electric winch
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Van Dimensions:
3.05m L x 2.44m W (120 in L x 96 in W) Van dimensions may vary to best fit end users requirements
Pulling Power- Up to
1,700 kg
(3,700 lbs)
Additional drum drive system options available to best meet specific service work applications.
4 x 4 Single Axle HD Slickline Van Unit with Single Split Drum Drawworks
Model SV1-160 series 4 x 4 is a single axle heavy duty aluminum van unit for slickline service work applications. This unit is designed to operate in rough terrain oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
SV1-160 SERIES 4
Features:
160 series van body design has stepped down enclosed roof style over drawworks with double rear doors 100% aluminum frame all welded construction Light weight design Generous quantity of external storage compartments and racks Large all weather climate controlled operators cabin Ergonomic design control panel Low noise level Operators captains chair Measuring System: In-line measure heads or conventional measure heads
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Mechanical or Electronic display meters Generator: 10 kw hydraulic drive generator Grease Injector: 5K hydraulic onboard grease injector system
Van Dimensions:
5.45m L x 2.48m W (214 in L x 98 in W) Van dimensions may vary to best fit end users requirements
Pulling Power- Up to
4,800 kg
(9,500 lbs)
Additional drum drive system options available to best meet specific service work applications.
SV2-120 SERIES
Features:
120 series van body design has small radius rear corner body style with tarpaulin roof cover over drawworks compartment 100% aluminum frame all welded construction All weather thermal insulation Light weight design Generous quantity of external storage compartments and racks Large all weather climate controlled operators cabin Ergonomic design control panel Low noise level Operators captains chair Measuring System: In-line measure heads or conventional measure heads
Mechanical or Electronic display meters Generator: 10 kw hydraulic drive generator Grease Injector: 5K hydraulic onboard grease injector system
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Van Dimensions:
6.40m L x 2.48m W (252 in L x 98 in W) Van dimensions may vary to best fit end users requirements
Pulling Power- Up to
5,400 kg
(12,000 lbs)
Additional drum drive system options available to best meet specific service work applications.
6 x 4 Tandem Axle HD Slickline Van Unit with Single Split Drum Drawworks
Model SV2-140 series is a tandem axle heavy duty aluminum van unit for slickline service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
SV2-140 SERIES
Features:
140 series van design has flat enclosed roof body style over drawworks with double rear doors 100% aluminum frame all welded construction All weather thermal insulation Light weight design Generous quantity of external storage compartments and racks Large all weather climate controlled operators cabin Ergonomic design control panel Low noise level Operators captains chair Measuring System: In-line measure heads or conventional measure heads
Mechanical or Electronic display meters Generator: 10 kw hydraulic drive generator Grease Injector: 5K hydraulic onboard grease injector system
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Van Dimensions:
6.40m L x 2.48m W (252 in L x 98 in W) Van dimensions may vary to best fit end users requirements
Pulling Power- Up to
5,600 kg
(12,500 lbs)
Additional drum drive system options available to best meet specific service work applications.
Aluminum Van Body Truck Units Product Line Model Series Numbers
Section 1
The following series of aluminum van body units are base units where modifications or design changes can be made to better fit the wireline service applications.
4 x 2 Single Axle Case Hole Logging Van Unit with Single Split Drum Drawworks
Model LV1-100 series is a single axle heavy duty van unit for case hole logging and perforating service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
LV1 - 10 0 S E R I E S
Features:
100 series van body design has 45 degree rear slope body style with tarpaulin roof cover over drawworks compartment 100% aluminum frame all welded construction All weather thermal insulation Light weight design Optimized external storage compartments and tool racks Large all weather climate controlled operators cabin Ergonomic design control panel Low noise level Operators captains chair Measuring System: In-line measure heads or conventional measure heads
Mechanical or Electronic display meters Generator: 10 kw hydraulic drive generator Grease Injector: 5K hydraulic onboard grease injector system
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Van Dimensions:
5.45m L x 2.48m W (214 in L x 98 in W) Van dimensions may vary to best fit end users requirements
Pulling Power- Up to
5,600 kg
(12,500 lbs)
Has excellent low speed for logging, as low as 1 mpm. Additional drum drive system options available to best meet specific service work applications.
4 x 2 Single Axle Production Logging Van Unit with Single Drum Drawworks
Model LV1-100 series is a single axle heavy duty van unit for case hole production logging and perforating service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
LV1 - 10 0 S E R I E S
Features:
100 series van body design has 45 degree rear slope body style with tarpaulin roof cover over drawworks compartment 100% aluminum frame all welded construction All weather thermal insulation Light weight design Optimized external storage compartments and tool racks Large all weather climate controlled operators cabin Ergonomic design control panel Low noise level Operators captains chair Measuring System: In-line measure heads or conventional measure heads
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
3,000 watt Inverter Auxiliary Hydraulic System: Auxiliary hydraulic system with cooler for mast trailer option
Van Dimensions:
5.45m L x 2.48m W (214 in L x 98 in W) Van dimensions may vary to best fit end users requirements
Pulling Power- Up to
5,600 kg
(12,500 lbs)
Has excellent low speed for logging, as low as 1 mpm. Additional drum drive system options available to best meet specific service work applications.
9,530 kg
(21,000 lbs)
4 x 2 Single Axle Case Hole Logging Van Unit with Single Drum Drawworks
Model LV1-180 series is a single axle heavy duty van unit for case hole logging and perforating service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
LV1 - 18 0 S E R I E S
Features:
180 series van body design has slopped rear roof line with square corner body style with tarpaulin roof cover overdrawworks compartment 100% aluminum frame all welded construction All weather thermal insulation Light weight design Optimized external storage compartments and tool racks Large all weather climate controlled operators cabin Ergonomic design control panel Low noise level Operators captains chair Measuring System: In-line measure heads or conventional measure heads
Mechanical or Electronic display meters Generator: 10 kw hydraulic drive generator Grease Injector: 5K hydraulic onboard grease injector system
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Van Dimensions:
5.45m L x 2.48m W (214 in L x 98 in W) Van dimensions may vary to best fit end users requirements
Pulling Power- Up to
5,600 kg
(12,500 lbs)
Has excellent low speed for logging, as low as 1 mpm. Additional drum drive system options available to best meet specific service work applications.
4 x 4 Single Axle Case Hole Logging Van Unit with Single Drum Drawworks
Model LV1-190 series is a single axle heavy duty van unit for case hole logging and perforating service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
LV1 - 19 0 S E R I E S
Features:
190 series van body design has large radius rear body style with tarpaulin roof cover over drawworks compartment 100% aluminum frame all welded construction All weather thermal insulation Light weight design Optimized external storage compartments and tool racks Large all weather climate controlled operators cabin Ergonomic design control panel Low noise level Operators captains chair Measuring System: In-line measure heads or conventional measure heads
Mechanical or Electronic display meters Generator: 10 kw hydraulic drive generator Grease Injector: 5K hydraulic onboard grease injector system
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Van Dimensions:
5.45m L x 2.48m W (214 in L x 98 in W) Van dimensions may vary to best fit end users requirements
Pulling Power- Up to
5,600 kg
(12,500 lbs)
Has excellent low speed for logging, as low as 1 mpm. Additional drum drive system options available to best meet specific service work applications.
6 x 4 Tandem Axle HD Logging Van Unit with Single or Double Drum Drawworks
Model LV2-100 series is a tandem axle heavy duty van unit for open hole or case hole logging and perforating service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
LV2 - 10 0 S E R I E S
Features:
100 series van body design has 45 degree rear slope body style with tarpaulin roof cover over drawworks compartment 100% aluminum frame all welded construction All weather thermal insulation Light weight design Optimized external storage compartments and tool racks Large all weather climate controlled operators cabin Ergonomic design control panel Low noise level Operators captains chair Measuring System: In-line measure heads or conventional measure heads
Mechanical or Electronic display meters Generator: 10 kw hydraulic drive generator Grease Injector: 5K hydraulic onboard grease injector system
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Van Dimensions:
6.09m L x 2.48m W (240 in L x 98 in W) Van dimensions may vary to best fit end users requirements
Pulling Power- Up to
5,600 kg
(12,500 lbs)
Has excellent low speed for logging, as low as 3 mpm. Additional drum drive system options available to best meet specific service work applications.
LV2 - 10 0 S E R I E S 6
Features:
100 series van body design has 45 degree rear slope body style with tarpaulin roof cover over drawworks compartment 100% aluminum frame all welded construction All weather thermal insulation Light weight design Optimized external storage compartments and tool racks Large all weather climate controlled operators cabin Ergonomic design control panel Low noise level Operators captains chair Measuring & Spooling: In-line measure head or conventional Electronic digital meters, weight, speed & depth
Overhead spooler system Generator: 10 kw hydraulic drive generator Grease Injector: 5K hydraulic onboard grease injector system
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Van Dimensions:
6.40m L x 2.48m W (252 in L x 98 in W) Van dimensions may vary to best fit end users requirements
Pulling Power- Up to
5,600 kg
(12,500 lbs)
Recommended 6 x 6 Chassis:
Front Axle Rear Tandem Axles 8,170 kg (18,000 lbs) 19,900 kg (44,000 lbs)
Has excellent low speed for logging, as low as 1 mpm. Additional drum drive system options available to best meet specific service work applications.
6 x 4 Tandem Axle HD Logging Van Unit with Single or Double Drum Drawworks
Model LV2-110 series is a tandem axle heavy duty van unit for open hole or case hole logging and perforating service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
LV2 - 11 0 S E R I E S
Features:
110 series van body design has 6 slope roof line with 45 degree rear slope body style with tarpaulin roof cover over drawworks compartment 100% aluminum frame all welded construction All weather thermal insulation Light weight design Optimized external storage compartments and tool racks Large all weather climate controlled operators cabin Ergonomic design control panel Low noise level Operators captains chair Measuring System: In-line measure heads or conventional measure heads
Mechanical or Electronic display meters Generator: 10 kw hydraulic drive generator Grease Injector: 5K hydraulic onboard grease injector system
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Van Dimensions:
6.09m L x 2.48m W (240 in L x 98 in W) Van dimensions may vary to best fit end users requirements
Pulling Power- Up to
5,600 kg
(12,500 lbs)
Has excellent low speed for logging, as low as 3 mpm. Additional drum drive system options available to best meet specific service work applications.
6 x 4 Tandem Axle HD Logging Van Unit with Single or Double Drum Drawworks
Model LV2-180 series is a tandem axle heavy duty van unit for open hole or case hole logging and perforating service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
LV2 - 18 0 S E R I E S
Features:
180 series van body design has slopped rear roof line with square corner body style with tarpaulin roof cover over drawworks compartment 100% aluminum frame all welded construction All weather thermal insulation Light weight design Optimized external storage compartments and tool racks Large all weather climate controlled operators cabin Ergonomic design control panel Low noise level Operators captains chair Measuring System: In-line measure heads or conventional measure heads
Mechanical or Electronic display meters Generator: 10 kw hydraulic drive generator Grease Injector: 5K hydraulic onboard grease injector system
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Van Dimensions:
6.09m L x 2.48m W (240 in L x 98 in W) Van dimensions may vary to best fit end users requirements
Pulling Power- Up to
5,600 kg
(12,500 lbs)
Has excellent low speed for logging, as low as 1 mpm. Additional drum drive system options available to best meet specific service work applications.
Aluminum Van Body Truck Units Product Line Model Series Numbers
Section 1
The following series of aluminum van body units are base units where modifications or design changes can be made to better fit the wireline service applications.
4 x 4 Unimog Single Axle Combination Van Unit with Double Drum Drawworks
Model CV1-195 series is a single axle heavy duty aluminum van unit for combination Slickline and Braided line service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
C V 1 - 19 5 S E R I E S
Features:
195 series van body design has full rear rounded body style with tarpaulin roof cover over drawworks compartment 100% aluminum frame all welded construction All weather thermal insulation Light weight design External storage compartments and racks All weather climate controlled operators cabin Ergonomic design control panel Low noise level Operators captains chair Measuring System: In-line measure heads or conventional measure heads
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Van Dimensions:
4.14m L x 2.33m W (162 in L x 92 in W) Van dimensions may vary to best fit end users requirements
Drum Line Capacity: Slickline Drum: .108 7,600 M (25,000 ft) Braided Line Drum: 7/32 7,600 M (25,000 ft) Drum Drive Performance: Drum Speed - Up to 480 mpm
(1,570 fpm)
Pulling Power- Up to
2,400 kg
(5,300 lbs)
Additional drum drive system options available to best meet specific service work applications.
6 x 4 Tandem Axle Combination Van Unit with Double Split Drum Drawworks
Model CV2-120 series is a tandem axle heavy duty aluminum van unit for combination Slickline and Braided line service work applications, carrying up to four different drum lines. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
C V 2 - 12 0 S E R I E S
Features:
120 series van body design has small radius rear corner body style with tarpaulin roof cover over drawworks compartment 100% aluminum frame all welded construction All weather thermal insulation Light weight design Generous quantity of external storage compartments and racks Large all weather climate controlled operators cabin Ergonomic design control panel Low noise level Operators captains chair Measuring System: In-line measure heads or conventional measure heads
Mechanical or Electronic display meters Generator: 10 kw hydraulic drive generator Grease Injector: 5K hydraulic onboard grease injector system
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Van Dimensions:
6.40m L x 2.48m W (252 in L x 98 in W) Van dimensions may vary to best fit end users requirements
Pulling Power- Up to
4,300 kg
(9,500 lbs)
Additional drum drive system options available to best meet specific service work applications.
C V 3 - 12 0 S E R I E S
Features:
120 series van body design has small radius rear corner body style with tarpaulin roof cover over drawworks compartment 100% aluminum frame all welded construction Light weight design Generous quantity of external storage compartments and racks Large all weather climate controlled operators cabin Ergonomic design control panel Low noise level Operators captains chair Measuring System: In-line measure heads or conventional measure heads
Mechanical or Electronic display meters Generator: 10 kw hydraulic drive generator Grease Injector: 5K hydraulic onboard grease injector system
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Van Dimensions:
6.40m L x 2.60m W (252 in L x 102 in W) Van dimensions may vary to best fit end users requirements
Pulling Power- Up to
5,400 kg
(12,000 lbs)
Additional drum drive system options available to best meet specific service work applications.
Rear Tri-Axle
CV3-160 SERIES
Features:
160 series van body design has stepped down enclosed roof style over drawworks with double rear doors 100% aluminum frame all welded construction Light weight design Generous quantity of external storage compartments and racks Large all weather climate controlled operators cabin Ergonomic design control panel Low noise level Operators captains chair Measuring System: In-line measure heads or conventional measure heads
Mechanical or Electronic display meters Generator: 10 kw hydraulic drive generator Grease Injector: 5K hydraulic onboard grease injector system
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Van Dimensions:
6.40m L x 2.60m W (252 in L x 102 in W) Van dimensions may vary to best fit end users requirements
Pulling Power- Up to
5,400 kg
(12,000 lbs)
Additional drum drive system options available to best meet specific service work applications.
Rear Tri-Axle
Section 2
Mast and Derrick Truck Units Product Line Model Series Numbers
Section 2
The following series of mast and derrick truck units are base units where modifications or design changes can be made to better fit the wireline service applications.
4 x 2 Single Axle Mast Logging Unit 45 ft. Telescoping Mast with Single Drum
Model LM1-200 series is a single axle with hydraulic telescoping mast with reach to 45 ft. for logging and perforating service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
LM1-200 SERIES
Features:
200 series operator control cabin is independent from deck and manufactured from 100% aluminum structure
All weather thermal insulated cabin with all weather climate con-
trolled interior Ergonomic design control panel Low noise level Hydraulic telescoping mast has an extended reach of 45 ft. from ground to crown Rear hydraulic down rigger cylinders incorporated in rear bumper
Optimized external storage compartments and tool racks
Measuring: Integrated measure wheel and electronic load cell in spool carriage assembly
Electronic display meters for line speed, depth and tension Generator: 10 kw hydraulic drive generator Auxiliary Winch: Hydraulic drive auxiliary winch
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Cab Dimensions:
1.82m L x 2.48m W (72 in L x 98 in W) Cab configuration may vary to best fit end users requirements
Pulling Power- Up to
5,600 kg
(12,500 lbs)
Has excellent low speed for logging, as low as 1 mpm. Additional drum drive system options available to best meet specific service work applications.
6 x 4 Tandem Axle Mast Logging Unit 48 ft. Telescoping Mast with Single Drum
Model LM2-210 series is a tandem axle with hydraulic telescoping mast with reach to 48 ft. for logging and perforating service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
L M2 - 2 10 S E R I E S
Features:
200 series operator control cabin is independent from deck and manufactured from 100% aluminum structure
All weather thermal insulated cabin with all weather climate con-
trolled interior Ergonomic design control panel Low noise level Hydraulic telescoping mast has an extended reach of 48 ft. from ground to crown Rear hydraulic down rigger cylinders incorporated in rear bumper
Optimized external storage compartments and tool racks
Measuring: Integrated measure wheel and electronic load cell in spool carriage assembly
Electronic display meters for line speed, depth and tension Generator: 10 kw hydraulic drive generator Auxiliary Winch: Hydraulic drive auxiliary winch
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Cab Dimensions:
2.48m L x 2.48m W (98 in L x 98 in W) Cab configuration may vary to best fit end users requirements
Pulling Power- Up to
5,600 kg
(12,500 lbs)
Has excellent low speed for logging, as low as 3 mpm. Additional drum drive system options available to best meet specific service work applications.
8 x 6 Tri-Axle Mast Logging Unit 48 ft. Telescoping Mast with Single Drum
Model LM3-210 series is a tri-axle with hydraulic telescoping mast with reach to 48 ft. for logging and perforating service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
L M3 - 2 10 S E R I E S
Features:
200 series operator control cabin is independent from deck and manufactured from 100% aluminum structure
All weather thermal insulated cabin with all weather climate con-
trolled interior Ergonomic design control panel Low noise level Hydraulic telescoping mast has an extended reach of 48 ft. from ground to crown Rear hydraulic down rigger cylinders incorporated in rear bumper
Optimized external storage compartments and tool racks
Measuring: Integrated measure wheel and electronic load cell in spool carriage assembly
Electronic display meters for line speed, depth and tension Generator: 10 kw hydraulic drive generator Auxiliary Winch: Hydraulic drive auxiliary winch
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Cab Dimensions:
2.48m L x 2.60m W (98 in L x 102 in W) Cab configuration may vary to best fit end users requirements
Pulling Power- Up to
6,300 kg
(13,800 lbs)
Has good smooth low speed for logging, as low as 6 mpm. Additional drum drive system options available to best meet specific service work applications.
Mast and Derrick Truck Units Product Line Model Series Numbers
Section 2
The following series of mast and derrick truck units are base units where modifications or design changes can be made to better fit the wireline service applications.
6 x 4 Tandem Axle Derrick Logging Unit 45 ft. Derrick and Single Drum Drawworks
Model LD2-200 series is a tandem axle 1 pc raising derrick unit for heavy duty logging and swabbing service work applications. This logging unit comes with heavy rated capacity derrick, climate controlled operators cabin and tool storage compartments. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions.
LD2-200 SERIES
Features:
200 series operator control cabin is independent from deck and manufactured from 100% aluminum structure
All weather thermal insulated cabin with all weather climate con-
trolled interior Ergonomic design control panel Low noise level 1 pc hydraulic raising derrick with raised reach of 45 ft. from ground to crown Rear hydraulic down rigger cylinders incorporated in rear bumper
Optimized external storage compartments and tool racks
Measuring: Integrated measure wheel and electronic load cell in spool carriage assembly
Electronic display meters for line speed, depth and tension Generator: 10 kw hydraulic drive generator Auxiliary Winch: Hydraulic drive auxiliary winch
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Cab Dimensions:
2.48m L x 2.48m W (98 in L x 98 in W) Cab configuration may vary to best fit end users requirements
Pulling Power- Up to
6,300 kg
(13,800 lbs)
Has good smooth low speed for logging, as low as 6 mpm. Additional drum drive system options available to best meet specific service work applications.
6 x 4 Tandem Axle Derrick Logging Unit 45 ft. Slant Hole Derrick and Single Drum
Model LD2-205 series is a tandem axle 1 pc raising derrick with slant hole option for heavy duty logging and swabbing service work applications. This logging unit comes with heavy rated capacity derrick, climate controlled operators cabin and tool storage compartments. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions.
LD2-205 SERIES
Features:
200 series operator control cabin is independent from deck and manufactured from 100% aluminum structure
All weather thermal insulated cabin with all weather climate con-
trolled interior Ergonomic design control panel Low noise level Slant hole application 1 pc derrick with raised reach of 45 ft. from ground to crown Rear hydraulic down rigger cylinders incorporated in rear bumper
Optimized external storage compartments and tool racks
Measuring: Integrated measure wheel and electronic load cell in spool carriage assembly
Electronic display meters for line speed, depth and tension Generator: 10 kw hydraulic drive generator Auxiliary Winch: Hydraulic drive auxiliary winch
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Cab Dimensions:
2.48m L x 2.48m W (98 in L x 98 in W) Cab configuration may vary to best fit end users requirements
Pulling Power- Up to
6,300 kg
(13,800 lbs)
Has good smooth low speed for logging, as low as 6 mpm. Additional drum drive system options available to best meet specific service work applications.
Mast and Derrick Truck Units Product Line Model Series Numbers
Section 2
The following series of mast and derrick truck units are base units where modifications or design changes can be made to better fit the wireline service applications.
6 x 4 Tandem Axle Mast Swab Rig 40 ft. Stiff Mast with Single Drum
Model WM2-100 series is a tandem axle with 1pc stiff mast with reach to 40 ft. for swabbing and other specialized service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
WM2 - 10 0 S E R I E S
Features:
200 series operator control cabin is independent from deck and manufactured from 100% aluminum structure
All weather thermal insulated cabin with all weather climate con-
trolled interior Ergonomic design control panel Low noise level Hydraulic raising 1pc stiff mast has reach of 40 ft. from ground to crown Rear hydraulic down rigger cylinders incorporated in rear bumper
Optimized external storage compartments and tool racks
Measuring: Integrated measure wheel and electronic load cell in spool carriage assembly
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Electronic display meters for line speed, depth and tension Generator: 10 kw hydraulic drive generator Auxiliary Winch: Hydraulic drive auxiliary winch
Cab Dimensions:
2.48m L x 2.48m W (98 in L x 98 in W) Cab configuration may vary to best fit end users requirements
Pulling Power- Up to
6,300 kg
(13,800 lbs)
Has good smooth low speed for logging, as low as 6 mpm. Additional drum drive system options available to best meet specific service work applications.
6 x 4 Tandem Axle Mast Swab Rig 48 ft. Telescoping Mast with Single Drum
Model WM2-210 series is a tandem axle with hydraulic telescoping mast with reach to 48 ft. for swabbing and other specialized service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
WM2-210 SERIES
Features:
200 series operator control cabin is independent from deck and manufactured from 100% aluminum structure
All weather thermal insulated cabin with all weather climate con-
trolled interior Ergonomic design control panel Low noise level Hydraulic telescoping mast has an extended reach of 48 ft. from ground to crown Rear hydraulic down rigger cylinders incorporated in rear bumper
Optimized external storage compartments and tool racks
Measuring: Integrated measure wheel and electronic load cell in spool carriage assembly
Electronic display meters for line speed, depth and tension Generator: 10 kw hydraulic drive generator Auxiliary Winch: Hydraulic drive auxiliary winch
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Cab Dimensions:
2.48m L x 2.48m W (98 in L x 98 in W) Cab configuration may vary to best fit end users requirements
Pulling Power- Up to
6,300 kg
(13,800 lbs)
Has good smooth low speed, as low as 6 mpm. Additional drum drive system options available to best meet specific service work applications.
Mast and Derrick Truck Units Product Line Model Series Numbers
Section 2
The following series of mast and derrick truck units are base units where modifications or design changes can be made to better fit the wireline service applications.
6 x 4 Tandem Axle Derrick HD Swab Unit 45 ft. Derrick and Single Drum Drawworks
Model WD2-200 series is a tandem axle 1 pc raising derrick option for heavy duty logging and swabbing service work applications. This logging unit comes with heavy rated capacity derrick, climate controlled operators cabin and tool storage compartments. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions.
WD2-200 SERIES
Features:
200 series operator control cabin is independent from deck and manufactured from 100% aluminum structure
All weather thermal insulated cabin with all weather climate con-
trolled interior Ergonomic design control panel Low noise level 1 pc derrick with raised reach of 45 ft. from ground to crown Rear hydraulic down rigger cylinders incorporated in rear bumper
Optimized external storage compartments and tool racks
Measuring: Integrated measure wheel and electronic load cell in spool carriage assembly
Electronic display meters for line speed, depth and tension Generator: 10 kw hydraulic drive generator Auxiliary Winch: Hydraulic drive auxiliary winch
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Cab Dimensions:
2.48m L x 2.48m W (98 in L x 98 in W) Cab configuration may vary to best fit end users requirements
Pulling Power- Up to
6,300 kg
(13,800 lbs)
Additional drum drive system options available to best meet specific service work applications.
6 x 4 Tandem Axle HD Swab Rig 45 ft. Derrick and Single Drum Drawworks
Model WD2-300 series Swab Rig unit is a tandem axle 1 pc raising derrick unit for heavy duty swabbing service work applications. This swab rig comes with heavy rated capacity derrick, operators cabin and tool storage compartments. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions.
WD2-300 SERIES
Features:
300 series operator control cabin is mounted on top of rear deck, manufactured from 100% aluminum structure
All weather thermal insulated cabin with all weather climate con-
trolled interior Ergonomic design control panel Low noise level 1 pc hydraulic raising derrick with raised reach of 45 ft. from ground to crown Rear hydraulic down rigger cylinders incorporated in rear bumper
Optimized external storage compartments and tool racks
Measuring: Integrated measure wheel and electronic load cell in spool carriage assembly
Electronic display meters for line speed, depth and tension Generator: 10 kw hydraulic drive generator Auxiliary Winch: Hydraulic drive auxiliary winch
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Cab Dimensions:
2.44m L x 1.82m W (96 in L x 72 in W) Cab configuration may vary to best fit end users requirements
Pulling Power- Up to
9,000 kg
(20,000 lbs)
Additional drum drive system options available to best meet specific service work applications.
8 x 6 Tri-Axle Derrick HD Swab Rig 48 ft. Slant Hole Derrick and Single Drum
Model WD3-215 series Swab Rig unit is a tri-axle 1 pc raising derrick with slant hole option unit for heavy duty swabbing service work applications. This swab rig comes with heavy capacity rated derrick, operators cabin and tool storage compartments. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions.
WD 3 - 2 1 5 S E R I E S
Features:
200 series operator control cabin is independent from deck and manufactured from 100% aluminum structure
All weather thermal insulated cabin with all weather climate con-
Measuring: Integrated measure wheel and electronic load cell in spooler carriage assembly
draulic raising derrick with raised reach of 48 ft. from ground to crown Rear hydraulic down rigger cylinders incorporated in rear bumper
Optimized external storage compartments and tool racks
Electronic display meters for line speed, depth and tension Generator: 10 kw hydraulic drive generator Auxiliary Winch: Hydraulic drive auxiliary winch
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems, friendly control design for operations
Cab Dimensions:
2.48m L x 2.48m W (98 in L x 98 in W) Cab configuration may vary to best fit end users requirements
W D 3 - 3 10 S E R I E S
Features:
300 series operator control cabin is mounted on top of rear deck, manufactured from 100% aluminum structure
All weather thermal insulated cabin with all weather climate con-
trolled interior Ergonomic design control panel Low noise level 1 pc hydraulic raising derrick with raised reach of 48 ft. from ground to crown Rear hydraulic down rigger cylinders incorporated in rear bumper
Optimized external storage compartments and tool racks
Measuring: Integrated measure wheel and electronic load cell in spooler carriage assembly
Electronic display meters for line speed, depth and tension Generator: 10 kw hydraulic drive generator Auxiliary Winch: Hydraulic drive auxiliary winch
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Cab Dimensions:
2.84m L x 1.82m W (120 in L x 72 in W) Cab configuration may vary to best fit end users requirements
Pulling Power- Up to
9,000 kg
(20,000 lbs)
Additional drum drive system options available to best meet specific service work applications.
8 x 6 Tri-Axle Derrick HD Swab Rig 48 ft. Slant Hole Derrick and Single Drum
Model WD3-315 series Swab Rig unit is a tri-axle 1 pc raising derrick with slant hole option unit for heavy duty swabbing service work applications. This swab rig comes with heavy capacity rated derrick, operators cabin and tool storage compartments. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions.
W D 3 - 3 15 S E R I E S
Features:
300 series operator control cabin is mounted on top of rear deck, manufactured from 100% aluminum structure
All weather thermal insulated cabin with all weather climate con-
Measuring: Integrated measure wheel and electronic load cell in spooler carriage assembly
draulic raising derrick with raised reach of 48 ft. from ground to crown Rear hydraulic down rigger cylinders incorporated in rear bumper
Optimized external storage compartments and tool racks
Electronic display meters for line speed, depth and tension Generator: 10 kw hydraulic drive generator Auxiliary Winch: Hydraulic drive auxiliary winch
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems, friendly control design for operations
Cab Dimensions:
2.84m L x 1.82m W (120 in L x 72 in W) Cab configuration may vary to best fit end users requirements
Pulling Power- Up to
9,000 kg
(20,000 lbs)
Additional drum drive system options available to best meet specific service work applications.
Mast and Derrick Truck Units Product Line Model Series Numbers
Section 2
The following series of mast and derrick truck units are base units where modifications or design changes can be made to better fit the wireline service applications.
8 x 6 Tri-Axle Derrick Log / Swab Unit 48 ft Derrick and Double Drum Drawworks
Model CD3-210 series is a tri-axle 1 pc raising derrick for heavy duty logging and swabbing service work applications. This unit comes with heavy rated capacity derrick, climate controlled operators cabin and tool storage compartments. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions.
CD3-210 SERIES
Features:
200 series operator control cabin is independent from deck and manufactured from 100% aluminum structure
All weather thermal insulated cabin with all weather climate con-
trolled interior Ergonomic design control panel Low noise level 1 pc derrick with raised reach of 48 ft. from ground to crown Rear hydraulic down rigger cylinders incorporated in rear bumper
Optimized external storage compartments and tool racks
Measuring: Integrated measure wheel and electronic load cell in spool carriage assembly
Electronic display meters for line speed, depth and tension Generator: 10 kw hydraulic drive generator Auxiliary Winch: Hydraulic drive auxiliary winch
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Cab Dimensions:
2.48m L x 2.48m W (98 in L x 98 in W) Cab configuration may vary to best fit end users requirements
Drum Line Capacity: E-Line Drum: 5/16 6,100 M (20,000 ft) Swab Drum: 7/16 4,000 M (13,200 ft) of ea. Drum Drive Performance: Drum Speed - Up to 320 mpm
(1,050 fpm)
Pulling Power- Up to
6,300 kg
(13,800 lbs)
Has good smooth low speed for logging, as low as 6 mpm. Additional drum drive system options available to best meet specific service work applications.
Mast and Derrick Truck Units Product Line Model Series Numbers
Section 2
The following series of mast and derrick truck units are base units where modifications or design changes can be made to better fit the wireline service applications.
6 x 4 Tandem Axle Logging Crane Unit Rear Boom Crane and WL Swivel Cabin
Model LC2-600 series is a tandem axle combination crane and wireline unit for logging service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform slickline service work applications.
LC2-600 SERIES
Features:
600 series has integrated swivel operators control cab and drawworks compartment 25 degrees rotating cabin and drawworks compartment External storage compartments 100% aluminum operators control cabin section
All weather thermal insulated cabin with all weather climate con-
Measuring: Measure head Electronic display meters for line speed, depth and tension Generator: 10 kw hydraulic drive generator Boom Crane: Boom reach depending on crane option 10, 12, 15, 18 & 20 Ton options
trolled interior Ergonomic design control panel Low noise level Rear mount hydraulic boom crane Rear and front out rigger cylinders
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Pulling Power- Up to
4,400 kg
(9,700 lbs)
Has good smooth low speed, as low as 6 mpm. Additional drum drive system options available to best meet specific service work applications.
4 x 4 Single Axle Slickline Crane Unit Articulating Crane with Single WL Drum
Model SC1-200 series is a single axle combination crane and wireline unit for light duty slickline service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
SC1-200 SERIES
Features:
100% aluminum operators control cabin section
All weather thermal insulated cabin with all weather climate con-
trolled interior External storage compartments Ergonomic design control panel Low noise level Rear articulating hydraulic crane Rear hydraulic out rigger stabilizers Lubricator support transport tray Measuring: Measure head Electronic display meters for line speed, depth and tension 110V AC Power: 3,000 watt inverter AC systems Drop Spools:
Quick removable drop off drum spool system
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Drum Line Capacity: Drop Spool Drum: .092 6,100 M (20,000 ft) Drum Drive Performance: Drum Speed - Up to 500 mpm
(1,600 fpm)
Cab Dimensions:
1.52.m L x 2.38m W (60 in L x 94 in W) Cab configuration may vary to best fit end users requirements
Pulling Power- Up to
1,600 kg
(3,500 lbs)
Crane Capacity:
Model 703-3S 3 sections Vertical reach of 9 m (29 ft.) Horizontal reach of 7.6 m (24ft.) Load max. outreach 300 kg (660 lbs)
4 x 2 Single Axle Slickline Crane Unit Articulating Crane, Van Body and Drawworks
Model SC1-400 series is a single axle combination crane and wireline unit for slickline service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
SC1-400 SERIES
Features:
Unit has the 120 series van body design with small radius rear corner body style with tarpaulin roof cover over drawworks compartment 100% aluminum operators control cabin section
All weather thermal insulated cabin with all weather climate con-
trolled interior
Generous quantity of external storage compartments and racks
Ergonomic design control panel Low noise level Rear articulating hydraulic crane Rear hydraulic out rigger stabilizers
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Van Dimensions:
4.29m L x 2.48m W (169 in L x 98 in W) Van dimensions may vary to best fit end users requirements
Pulling Power- Up to
4,000 kg
(9,000 lbs)
Drop Spool Attachment: Independent hydraulic drive motor with quick disconnect coupling on drop spool, 3,000m of .092 line.
Crane Capacity:
Model 805-4S - 4 sections Load max. outreach 360kg Vertical reach of 12 m (39 ft.) Horizontal reach of 9 m (29ft.)
4 x 2 Single Axle Slickline Crane Unit Rear Boom Crane, Van Body and Drawworks
Model SC1-700 series is a single axle combination crane and wireline unit for slickline service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
SC1-700 SERIES
Features:
Unit has the 160 series van body design with stepped down enclosed roof style over drawworks with double rear doors 100% aluminum operators control cabin section
All weather thermal insulated cabin with all weather climate con-
trolled interior
Generous quantity of external storage compartments and racks
Measuring: Measure head Electronic display meters for line speed, depth and tension Generator: 10 kw hydraulic drive generator Boom Crane: Boom vertical reach 13.7m (45 ft) horizontal 11.9m (39 ft)
Crane capacity 3,600 to 250 kg
Ergonomic design control panel Low noise level Rear corner mount hydraulic telescoping boom crane Rear hydraulic out rigger stabilizers
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Split Drum Line Capacity: Drum: .108 & .125 Line 7,600 M (25,000 ft) of ea. Drum Drive Performance: Drum Speed - Up to 620 mpm
(2,030 fpm)
Cab Dimensions:
4.39m L x 2.48m W (173 in L x 98 in W) Cab configuration may vary to best fit end users requirements
Pulling Power- Up to
2,300 kg
(5,030 lbs)
Additional drum drive system options available to best meet specific service work applications.
6 x 4 Tandem Axle Slickline Crane Unit Rear Boom Crane and WL Swivel Cabin
Model SC2-600 series is a tandem axle combination crane and wireline unit for slickline service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform logging service work applications.
SC2-600 SERIES
Features:
600 series has integrated swivel operators control cab and drawworks compartment 25 degrees rotating cabin and drawworks compartment External storage compartments 100% aluminum operators control cabin section
All weather thermal insulated cabin with all weather climate con-
Measuring: Measure head Electronic display meters for line speed, depth and tension Generator: 10 kw hydraulic drive generator Boom Crane: Boom reach depending on crane option 10, 12, 15, 18 & 20 Ton options
trolled interior Ergonomic design control panel Low noise level Rear mount hydraulic boom crane Rear and front out rigger cylinders
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Pulling Power- Up to
4,000 kg
(9,000 lbs)
Additional drum drive system options available to best meet specific service work applications.
6 x 4 Tandem Axle Slickline Crane Unit Rear Boom Crane, Van Body and Drawworks
Model SC2-700 series is a tandem axle combination crane and wireline unit for slickline service work applications. This unit is designed to operate in an oilfield environment including artic, desert and tropical conditions and can be modified to perform other wireline service work applications.
SC2-700 SERIES
Features:
Unit has the 160 series van body design with stepped down enclosed roof style over drawworks with double rear doors 100% aluminum operators control cabin section
All weather thermal insulated cabin with all weather climate con-
trolled interior
Generous quantity of external storage compartments and racks
Measuring: Measure head Electronic display meters for line speed, depth and tension Generator: 10 kw hydraulic drive generator Boom Crane: Boom vertical reach 13.7m (45 ft) horizontal 11.9m (39 ft)
Crane capacity 3,600 to 250 kg
Ergonomic design control panel Low noise level Rear corner mount hydraulic telescoping boom crane Rear hydraulic out rigger stabilizers
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Drum Line Capacity: Drum: .108 & .125 Line 7,600 M (25,000 ft) of ea. Drum Drive Performance: Drum Speed - Up to 620 mpm
(2,030 fpm)
Cab Dimensions:
5.48m L x 2.48m W (216 in L x 98 in W) Cab configuration may vary to best fit end users requirements
Pulling Power- Up to
2,300 kg
(5,030 lbs)
Additional drum drive system options available to best meet specific service work applications.
Section 3
Section 3
The following series of wireline skid units are base units where modifications or design changes can be made to better fit the wireline service applications.
CS1 - 400 1 Piece combination slickline and logging skid with enclosed operator cabin
KS1 - 400 1 Piece pipeline wireline skid with enclosed operator cabin
Light Weight Single Drum Gas Engine Power Slickline Skid Unit
Model SS1-100 series self-contained Slickline skid unit is designed to work in markets requiring economical, portable, compact, lightweight equipment for wireline survey service work on land based applications. The winch hydraulic system is powered by a 13 HP gas engine providing a good range of drum speed and pulling power for most light duty wireline service work applications.
SS1-100 SERIES
Features:
Aluminum base frame all welded construction Single point lift Light weight Compact design 13 HP gas engine power Close-loop hydraulic system Direct hydraulic motor drum drive Machined steel drum Mechanical disc brake Prepped, primed and painted Measuring head Depth mechanical counter Dual spring balanced manual hand spooler Minimum maintenance system Friendly control design for operations with operators seat Non Zone applications
Options:
Weight indicator gauge and load cell Forklift pockets under skid Choice of other power source; Diesel engine.
Skid Dimensions:
1.0m L x 1.0m W x 1.0m H (39 in L x 39 in W x 39 in H) Skid Weight (Dry) 275 kgs (600 lbs)
Light Weight Single Drum Diesel Engine Power Slickline Skid Unit
Model SS1-100 series self-contained Slickline skid unit is designed to work in markets requiring economical, portable, compact, lightweight equipment for wireline survey service work on land based applications. The winch hydraulic system is powered by a 8 HP diesel engine providing a good range of drum speed and pulling power for most light duty wireline service work applications.
SS1-110 SERIES
Features:
Aluminum base frame all welded construction Single point lift Light weight Compact design 8 HP gas engine power Close-loop hydraulic system Direct hydraulic motor drum drive Machined steel drum Mechanical disc brake Prepped, primed and painted Measuring head Depth mechanical counter Dual spring balanced manual hand spooler Minimum maintenance system Friendly control design for operations with operators seat Non Zone applications
Options:
Weight indicator gauge and load cell Forklift pockets under skid Choice of other power source; Diesel engine.
Skid Dimensions:
1.0m L x 1.0m W x 1.0m H (39 in L x 39 in W x 39 in H) Skid Weight (Dry) 275 kgs (600 lbs)
SS1-120 SERIES
Features:
Aluminum base frame all welded construction Single point lift Light weight Compact design 10 HP electric motor power Close-loop hydraulic system
Direct hydraulic motor drum drive
Machined steel drum Mechanical disc brake Prepped, primed and painted Measuring head Depth mechanical counter Dual spring balanced manual hand spooler Minimum maintenance system Friendly control design for operations None Zone applications
Skid Dimensions:
1.0m L x 1.0m W x 1.0m H (39 in L x 39 in W x 39 in H) Skid Weight (Dry) 250 kg (550 lbs)
Options:
Weight indicator gauge and load cell Forklift pockets under skid 50 or 60 Hz power source
Medium Duty Single Drum Diesel Engine Power Slickline Skid Unit
Model SS1-200 series self-contained Slickline skid unit is designed to work in markets requiring economical, portable, compact, lightweight equipment for medium duty wireline survey service work on land based applications. The winch hydraulic system is powered by a 26 HP diesel engine providing a wide range of drum speed and pulling power for all medium duty wireline service work applications.
SS1-200 SERIES
Features:
Aluminum frame all welded construction Four point lift Light weight Compact design 26 HP diesel power engine Close-loop hydraulic system Direct hydraulic motor drum drive Machined steel drum Mechanical disc brake Prepped, primed and painted Measuring head Depth mechanical counter Linear bar hand spooler Minimum maintenance system Friendly control design for operations Non Zone applications Max Pull - Core Max Pull - Rim
Options:
Weight indicator gauge and load cell Heli-portable Forklift pockets under skid Quick removable drum spool option
Skid Dimensions:
1.5m L x 1.2m W (60 in L x 48 in W) Skid Weight (Dry) 600 kgs (1,350 lbs)
SS1-220 SERIES
Features:
Aluminum frame all welded construction Light weight Compact design 15 HP electric motor Close-loop hydraulic system Direct hydraulic motor drum drive Machined steel drum Mechanical disc brake Prepped, primed and painted Measuring head Depth mechanical counter Linear bar hand spooler Weight indicator gauge and load cell Minimum maintenance system Friendly control design for operations Forklift access from front or rear Non Zone applications
Skid Dimensions:
1.85m L x 1.06m W (72 in L x 42 in W) Skid Weight (Dry) 715 kg (1,575 lbs)
Options:
Electronic measure system Crash cage and lifting system Non-II certified
SS1-500 SERIES
Features:
Steel base frame all welded construction Single point lift Compact design 20 HP electric motor power Close-loop hydraulic system Transmission drum drive Machined steel drum Mechanical band brake Prepped, primed and painted Measuring head Depth mechanical counter Dual spring balanced manual hand spooler Minimum maintenance system Friendly control design for operations
Options:
Weight indicator gauge and load cell Forklift pockets under skid 50 or 60 Hz power source Planetary drum drive Zone I applications
Skid Dimensions:
1.1m L x .92m W x 1.3m H (42 in L x 36 in W x 50 in H) Skid Weight (Dry) 750 kg (1,650 lbs)
Slickline Single Drum with Control Cab Skid with Diesel Engine Power Pack Skid
Model SS2-400 series 2 piece Slickline skid package unit is designed to work in markets requiring portable, compact, lightweight equipment for slickline service work applications. The 45 hp diesel power pack skid provides the hydraulic winch skid with a wide range of drum speed and pulling power for wireline service work applications.
SS2-400 SERIES
Features:
Aluminum frame all welded construction Integral enclosed operator cabin Four point lifting slings Integral forklift pockets Light weight Compact design 45 HP diesel power pack Close-loop hydraulic system Direct drum planetary drive system Machined steel drum Mechanical band brake Prepped, primed and painted Measuring head Depth mechanical counter Linear bar hand spooler Minimum maintenance system Friendly control design for operations
Options:
Weight indicator gauge and load cell Electronic measuring system Heli-portable Zone II specifications Max Pull - Rim
Skid Dimensions:
Control Skid Dry Weight Power Skid Dry Weight 2.0m L x 1.65m W (80 in L x 65 in W) 900 kg (2,000 lbs) 2.0m L x .92m W (80 in L x 36 in W) 800 kg (1,750 lbs)
Section 3
The following series of wireline skid units are base units where modifications or design changes can be made to better fit the wireline service applications.
CS1 - 400 1 Piece combination slickline and logging skid with enclosed operator cabin
KS1 - 400 1 Piece pipeline wireline skid with enclosed operator cabin
LS1-500 SERIES
Features:
Steel base frame all welded construction Four point lift Compact design 30 HP electric motor power Close-loop hydraulic system 4 spd Transmission drum drive Machined steel drum Mechanical band brake Prepped, primed and painted Measuring head Depth mechanical counter Front dual bar mechanical hand spooler system Minimum maintenance system Friendly control design for operations
Options:
Weight indicator gauge and load cell Forklift pockets under skid 50 or 60 Hz power source Planetary drum drive
Zone I applications
Skid Dimensions:
Logger Skid 1.52m L x 1.27m W (60 in L x 50 in W)
Logging Single Drum with Control Cab Skid and Diesel Engine Power Pack Skid
Model LS2-400 series 2 piece Logging skid package unit is designed to work in markets requiring portable, compact equipment for logging service work applications. The 80 hp diesel power pack skid provides the hydraulic winch skid with a wide range of drum speed and pulling power for all case or open hole logging service work applications and provides climate controlled operators cabin.
LS2-400 SERIES
Features:
Aluminum frame all welded construction Integral enclosed operator cabin Climate control operator cabin Four point lifting slings Integral forklift pockets Light weight Compact design 80 HP diesel power pack Close-loop hydraulic system Machined steel drum Air activated band brake Prepped, primed and painted Minimum maintenance system Friendly control design for operations
Options:
Measure head Weight indicator gauge and load cell Electronic measuring system Spooler system Heli-portable Zone II specifications
Skid Dimensions:
Control Skid 3.8m L x 2.2m W (150 in L x 87 in W) 2.7m L x 1.2m W (108 in L x 48 in W)
Power Skid
Section 3
The following series of wireline skid units are base units where modifications or design changes can be made to better fit the wireline service applications.
CS1 - 400 1 Piece combination slickline and logging skid with enclosed operator cabin
KS1 - 400 1 Piece pipeline wireline skid with enclosed operator cabin
Double Drum Combination Skid with Control Cabin and Diesel Power Pack
Model CS1-400 series 1 piece Combination skid unit is designed to work in markets requiring portable equipment for slickline and logging service work applications. The skid is designed to operate in harsh environments and can withstand severe transport handling conditions. The 110 hp diesel engine provides hydraulic power to the winch drums and to the hydraulic generator which provides the operators cabin with a climate controlled environment. The winch drums can be designed with any combination of line for slickline, swabbing and logging service work applications.
CS1-400 SERIES
Features:
Steel frame all welded construction Enclosed climate control operator cabin Four point lifting slings Integral forklift pockets 1 piece self contained skid 110 HP diesel power pack Close-loop hydraulic system Dual drum drawworks winch Prepped, primed and painted Minimum maintenance system Friendly control design for operations
Options:
Measure head Weight indicator gauge and load cell Electronic measuring system Spooler system Hydraulic generator
Skid Dimensions:
5.3m (210 in) L x 2.4m (94 in) W
Section 3
The following series of wireline skid units are base units where modifications or design changes can be made to better fit the wireline service applications.
CS1 - 400 1 Piece combination slickline and logging skid with enclosed operator cabin
KS1 - 400 1 Piece pipeline wireline skid with enclosed operator cabin
HD Pipeline Wireline Skid with Control Cabin and Diesel Power Pack
Model KS1-400 series HD pipeline wireline skid unit designed to work in markets requiring portable equipment for pipeline service work applications. The skid is designed to operate in harsh environments and can withstand severe transport handling conditions. The design allows the skid to be packed inside a 20 ft shipping container. The 110 hp diesel engine provides hydraulic power to the winch drum and spooler system. The skid comes with control cab with control panel, captains chair, bench seat and storage cabinets. The HD drawworks winch assembly design specifically for heavy line pull service applications.
KS1-400 SERIES
Features:
Steel frame all welded construction Enclosed climate control operator cabin Four point lifting slings Integral forklift pockets 1 piece self contained skid 110 HP diesel power pack Close-loop hydraulic system HD drawworks winch Prepped, primed and painted Minimum maintenance design Friendly control design for operations HD measure head, 30,000 lb rated capacity Electronic measuring system Length: 5.33m (210 in) Width: 2.14m (84 in) Height: 2.18m (86 in)
Skid Dimension:
Options:
10kw Hydraulic generator Cab Air conditioning
Section 3
The following series of wireline skid units are base units where modifications or design changes can be made to better fit the wireline service applications.
CS1 - 400 1 Piece combination slickline and logging skid with enclosed operator cabin
KS1 - 400 1 Piece pipeline wireline skid with enclosed operator cabin
Slickline Truck Mounted Skid Unit Single Drum Drawworks with Re-spooler
Model SE1-200 series truck mounted self-contained Slickline skid unit, designed to work in markets requiring economical equipment for medium duty wireline service work on land based applications. The winch hydraulic system is powered by the truck PTO system offering a wide range of drum speed and pulling power for all medium duty wireline service work applications.
SE1-200 SERIES
Features:
Modular steel skid design, can be removed from truck deck Below deck external storage available on truck deck Work vise mounted on truck deck Truck PTO power supply for hydraulic system Skid dash panel truck engine remote engine throttle Operator dash panel controls Operator adjustable seat Measuring: Measure head Mechanical depth and tension system Re-Spooler Attachment: Self spooler drive attachment
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
Deck Dimensions:
3.30.m L x 2.38m W (130 in L x 94 in W)
Pulling Power- Up to
4,000 kg
(9,000 lbs)
Additional drum drive system options available to best meet specific service work applications.
SE1-300 SERIES
Features:
Compact skid design All operator controls on the side of skid Truck PTO power supply for hydraulic system
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations
SE1-320 SERIES
Features:
Modular steel skid design, can be removed from truck deck Below deck external storage available on truck deck Work vise mounted on truck deck Truck PTO power supply for hydraulic system Skid dash panel truck engine remote engine throttle Operator dash panel controls
Prepped, primed and painted Hydraulic System: HD close-loop hydraulic system Minimum maintenance design systems Friendly control design for operations Installed on truck chassis or sent out as a field installation package
Skid Dimensions:
1.5m L x 1.5m W (60 in L x 60 in W)
Section 4
Section 4
The following series of drawworks winch equipment are base units where modifications or design changes can be made to better fit the wireline service applications.
LA1 - 400SS Stainless steel single drum with 2spd direct mount planetary drive
Features:
High performance with a wide range of line pulling and line speeds 4 Speed manual transmission with direct mount hydraulic motor Close-loop hydraulic system Machined balanced steel drum Dual band brakes with mechanical and air operated controls HD drum shaft bearings Split or non split drum configurations Aluminum chain guards Prepped, primed and painted Minimum maintenance system
Options:
Linear double bar spooler system Weight indicator gauge and load cell Measure heads Electronic measuring system
Drop Spool & Split Drum Slickline Winch 4 Speed Transmission Drive
Model SA1-110-D series drawworks winch assembly is a single split drum hydraulic winch with a drop spool attachment. The main drum designed for heavy duty slickline service work applications for line size 0.108 and larger. The quick removable drop spool attachment for special recorder and memory gauge service work. The 4 speed manual transmission hydraulic drive system offers a wide range of line speeds and line pulling power making this unit ideal for jarring and HD fishing operations, winch designs for mobile skid units and for land based truck mounted applications.
Features:
High performance with a wide range of line pulling and line speeds 4 Speed manual transmission with direct mount hydraulic motor Close-loop hydraulic system Machined balanced steel drum Dual band brakes with mechanical and air operated controls HD drum shaft bearings Split or non split drum configurations Aluminum chain guards Prepped, primed and painted Minimum maintenance system
Options:
Linear double bar spooler system Weight indicator gauge and load cell Measure heads Electronic measuring system
Drop Spool:
0.092 3,000m
Drop Spool & Single Drum Slickline Winch 2 Speed Planetary Chain Drive
Model SA1-200-D series drawworks winch assembly is a single drum hydraulic winch with a drop spool attachment. The main drum designed for slickline service work applications for line size up to 0.108. The quick removable drop spool attachment for special recorder and memory gauge service work. The 2 speed electric shift planetary gear box with direct mount hydraulic motor chain drive system offers a wide range of line speeds and line pulling power suitable for a wide variety of slickline service work operations, winch designs for mobile skid units and for land based truck mounted applications.
Features:
High performance with a wide range of line pulling and line speeds 2 Speed electric shift planetary gear box with direct mount hydraulic motor Close-loop hydraulic system Machined balanced steel drum Single or dual band brakes with mechanical operated control HD drum shaft bearings Split or non-split drum configurations Prepped, primed and painted Minimum maintenance system Max Pull - Rim Max Pull - Core Max Speed - Rim
Options:
Linear double bar spooler system Weight indicator gauge and load cell Measure heads
Drop Spool:
0.092 3,000m
S A 1 - 2 10 S E R I E S W I N C H
Features:
High performance with a wide range of line pulling and line speeds 2 Speed electric shift planetary gear box with direct mount hydraulic motor Close-loop hydraulic system Machined balanced steel drum Single or dual band brakes with mechanical operated control HD drum shaft bearings Split or non-split drum configurations Prepped, primed and painted Minimum maintenance system Max Speed - Rim
Options:
Linear double bar spooler system Weight indicator gauge and load cell Measure heads Electronic measuring system Air operated band brakes
Light Duty Single Drum Slickline Winch Direct Mount Planetary Drive
Model SA1-300 Series drawworks winch assembly is a light duty single drum hydraulic winch designed for light duty slickline applications for line size up to 0.092. The dive system consist of single speed direct mount planetary gear box with direct mount hydraulic motor that eliminate the chain drive. It offers a range of line speeds and line pulling power suitable for retrieving survey tools, memory gauge work and for various other light duty slickline operations, winch designs for mobile skid units and for land based truck mounted applications.
Features:
Direct mount planetary gear box drive with direct mount hydraulic motor Open-loop hydraulic system Compact design Machined balanced steel drum Single band brake with mechanical operated control HD drum shaft bearing No chain drive Prepped, primed and painted Minimum maintenance system Winch Hoist Specification: Max Speed - Core 100 mpm (325 fpm) 300 mpm (985 fpm) 550 kg (1,200 lbs) 500 kg (900 lbs)
Options:
Spooler system Weight indicator gauge and load cell Measure heads Electronic measuring system
Medium Duty Single Drum Slickline Winch Direct Mount Planetary Drive
Model SA1-320 Series drawworks winch assembly is a medium duty single drum hydraulic winch designed for slickline applications for line size up to 0.108. The drive system consist of single speed direct mount planetary gear box with a 2 speed direct mount hydraulic motor that eliminate the chain drive. It offers a range of line speeds and line pulling power suitable for retrieving survey tools, memory gauge work and for various other slickline operations, winch designs for mobile skid units and for land based truck mounted applications.
Features:
Direct mount planetary gear box drive with direct mount hydraulic motor Close-loop hydraulic system Compact design Machined balanced steel drum Single band brake with mechanical operated control HD drum shaft bearing No chain drive Prepped, primed and painted Minimum maintenance system Winch Hoist Specification: Max Speed - Core 195 mpm (640 fpm) 580 mpm (1,900 fpm) 1,650 kg (3,590 lbs) 1,150 kg (2,500 lbs)
Options:
Spooler system Weight indicator gauge and load cell Measure heads Electronic measuring system
Features:
Direct drive hydraulic motor Quick disconnect coupler Compact design Machined balanced steel drum Quick removable drum system Disc brake with mechanical or hydraulic control HD drum shaft bearing Prepped, primed and painted Minimum maintenance system Max Speed - Rim Winch Hoist Specification: Max Speed - Core 200 mpm (650 fpm) 395 mpm (1,250 fpm) 630 kg (1,350 lbs) 325 kg (700 lbs)
Options:
Spooler system Weight indicator gauge and load cell Measure heads Electronic measuring system
Features:
High performance with a wide range of line pulling and line speeds 2 Speed electric shift planetary gear box with direct mount hydraulic motor Compact design Machined balanced steel drum Quick removable drum system Disc brake with mechanical or hydraulic control HD drum shaft bearing Aluminum chain guards Prepped, primed and painted Minimum maintenance system Max Pull - Core Max Speed - Rim Winch Hoist Specification: Max Speed - Core 285 mpm (985 fpm) 500 mpm (1,650 fpm) 2,400 kg (5,200 lbs) 1,700 kg (3,700 lbs)
Options:
Spooler system Weight indicator gauge and load cell Measure heads Electronic measuring system
Features:
Direct drive hydraulic motor Compact design Machined balanced steel drum Quick removable drum system Disc brake with mechanical or hydraulic control HD drum shaft bearing Aluminum chain guards Prepped, primed and painted Minimum maintenance system Max Pull - Core Max Speed - Rim Winch Hoist Specification: Max Speed - Core 140 mpm (460 fpm) 275 mpm (900 fpm) 800 kg (1,700 lbs) 1,600 kg (3,500 lbs)
Options:
Spooler system Weight indicator gauge and load cell Measure heads Electronic measuring system
Section 4
The following series of drawworks winch equipment are base units where modifications or design changes can be made to better fit the wireline service applications.
LA1 - 400SS Stainless steel single drum with 2spd direct mount planetary drive
L A 1 - 10 0 S E R I E S W I N C H
Features:
High performance with a wide range of line pulling and line speeds 3 speed manual transmission gear box with direct mount 2 speed hydraulic motor Electric over air shift selector Constant low speed for logging application Close-loop hydraulic system Machined balanced steel drum Dual band brakes with air operated controls HD drum shaft bearings Split or non split drum configurations Drive system aluminum guards Prepped, primed and painted Minimum maintenance system
Options:
Spooling system Measure heads Electronic measuring system for line speed, depth and weight
Features:
High performance with a wide range of line pulling and line speeds Planetary gear box with direct mount 2 speed hydraulic motor Electric shift motor speed Constant low speed for logging application Close-loop hydraulic system Machined balanced steel drum Dual band brakes with air operated controls HD drum shaft bearing Split or non split drum configurations Prepped, primed and painted Minimum maintenance system
Options:
Spooling system Measure heads Electronic measuring system for line speed, depth and weight
Features:
High performance with a wide range of line pulling and line speeds Direct mount planetary gear box with direct mount 2 speed hydraulic motor Electric motor shift Constant low speed for logging application Close-loop hydraulic system Machined balanced steel drum Dual band brakes with air operated controls HD drum shaft bearing Split or non split drum configurations Prepped, primed and painted Minimum maintenance system
Options:
Spooling system Measure heads Electronic measuring system for line speed, depth and weight
Features:
High performance with a wide range of line pulling and line speeds 2 speed planetary gear box with direct mount 2 speed hydraulic motor Electric shift selector Constant low speed for logging application Close-loop hydraulic system Machined balanced steel drum Dual band brakes with air operated controls HD drum shaft bearing Split or non split drum configurations Prepped, primed and painted Minimum maintenance system
Options:
Spooling system Measure heads Electronic measuring system for line speed, depth and weight
Features:
High performance with a wide range of line pulling and line speeds 2 speed planetary gear box with direct mount 2 speed hydraulic motor Electric shift selector Constant low speed for logging application Close-loop hydraulic system Machined balanced steel drum Dual band brakes with air operated controls HD drum shaft bearing Split or non split drum configurations Prepped, primed and painted Minimum maintenance system
Options:
Spooling system Measure heads Electronic measuring system for line speed, depth and weight
Single Split Drum Logging Winch 2 Speed Direct Mount Planetary Drive
Model LA1-410 series drawworks winch assembly is a single split drum hydraulic winch designed for heavy duty logging service work applications. Available in single line or split drum configuration. The 2 speed electric over hydraulic shift planetary gear box with direct mount 2 speed hydraulic motor drive system offers a wide range of line speeds and line pulling power suitable for heavy logging service work in case hole and or open hole operations, winch designs for mobile skid units and for land based truck mounted applications.
Features:
High performance with a wide range of line pulling and line speeds 2 speed planetary gear box with direct mount 2 speed hydraulic motor Electric shift selector Constant low speed for logging application Close-loop hydraulic system Machined balanced steel drum Dual band brakes with air operated controls HD drum shaft bearing Split or non split drum configurations Prepped, primed and painted Minimum maintenance system
Options:
Spooling system Measure heads Electronic measuring system for line speed, depth and weight
Features:
High performance with a wide range of line pulling and line speeds Direct mount planetary gear box with direct mount 2 speed hydraulic motor Electric motor shift Constant low speed for logging application Close-loop hydraulic system Machined balanced steel drum Dual band brakes with air operated controls HD drum shaft bearing Split or non split drum configurations Prepped, primed and painted
Minimum maintenance system
Winch Hoist Specification: Max Speed - Core 150 mpm (492 fpm) Max Speed - Rim 470 mpm (1,540 fpm) Max Pull - Core 3,100 kg (8,800 lbs) Max Pull - Rim 1,800 kg (4,000 lbs) Drive specifications can be adjusted to best fit service applications
Options:
Spooler system Weight indicator gauge and load cell Measure heads Electronic measuring system
Double Drum Logging Winch Two 2 Speed Direct Mount Planetary Drive
Model LA2-400 series drawworks winch assembly is a double drum hydraulic winch designed for heavy duty logging service work applications. The drive system consist of each drum having a 2 speed electric over hydraulic shift planetary gear box with direct mount 2 speed hydraulic motor. It offers a wide range of line speeds and line pulling power suitable for heavy logging service work in case hole and or open hole operations. The double
drum configuration allows operators the flexibility of having different line sizes for specialized services, designs for mo-
bile skid units and for land based truck mounted applications.
Features:
High performance with a wide range of line pulling and line speeds 2 speed planetary gear box with direct mount 2 speed hydraulic motor Electric shift selector Constant low speed for logging application Close-loop hydraulic system Machined balanced steel drum Dual band brakes with air operated controls HD drum shaft bearing Split or non split drum configurations Prepped, primed and painted Minimum maintenance system
Options:
Spooling system Measure heads Electronic measuring system for line speed, depth and weight
Section 4
The following series of drawworks winch equipment are base units where modifications or design changes can be made to better fit the wireline service applications.
LA1 - 400SS Stainless steel single drum with 2spd direct mount planetary drive
C A 2 - 6 15 S E R I E S W I N C H
Features:
High performance with a wide range of line pulling and line speeds 3 speed manual transmission with direct mount 2 speed hydraulic motor Planetary gear box with direct mount 2 speed hydraulic motor Electric over air shift selector Close-loop hydraulic system Machined balanced steel drum Dual band brakes with air operated controls HD drum shaft bearings Split or non split drum configurations Prepped, primed and painted Minimum maintenance system Max Speed - Rim Max Pull - Core Max Pull - Rim
Options:
Spooling system Measure heads Electronic measuring system
Typical drum design can hold Up to 6,100 M (20,000 ft) of 3/16 - 7/32 - 1/4 - 5/16 Cable or equivalent metric line sizes
Typical drum design can hold Up to 7,600 M (25,000 ft) of .092 - .108 - .125 Line or equivalent metric line sizes
Double Split Drum Combination Winch 4 Speed Transmission & Planetary Drive
Model CA2-720 series drawworks winch assembly is a double split drum hydraulic winch designed for a combination of wireline service work applications. Both drums available in single line or split drum configuration. The braided drum has a 2 speed electric over hydraulic shift planetary gear box with direct mount 2 speed hydraulic motor, the slickline drum has a 4 speed manual transmission hydraulic drive system . This combination drawworks offers a wide range of line speeds and line pulling power on both drums suitable for a variety of wireline service work, winch designs for mobile skid units and for land based truck mounted applications.
Features:
High performance with a wide range of line pulling and line speeds 4 speed manual transmission with direct mount hydraulic motor 2 speed planetary gear box with direct mount 2 speed hydraulic motor Electric over air shift selector Close-loop hydraulic system Machined balanced steel drum Dual band brakes with air operated controls HD drum shaft bearings Split or non split drum configurations Prepped, primed and painted Minimum maintenance system
Options:
Spooling system Measure heads Electronic measuring system
Typical drum design can hold Up to 6,100 M (20,000 ft) of 3/16 - 7/32 - 1/4 - 5/16 Cable or equivalent metric line sizes
Typical drum design can hold Up to 7,600 M (25,000 ft) of .092 - .108 - .125 - .140 Line or equivalent metric line sizes
Double Drum Combination Winch with two (2) Direct Mount Planetary Drives
Model CA2-840 series drawworks winch assembly is a double drum hydraulic winch designed for a combination of wireline service work applications. The braided drum has a 2 speed electric over hydraulic shift planetary gear box with direct mount 2 speed hydraulic motor and the slickline drum has a single speed planetary gear box with 2 speed direct mount hydraulic motor drive system . The slickline drum raises for operator to have clear line of sight when in operation. This combination drawworks offers a wide range of line speeds and line pulling power on both drums suitable for a variety of wireline service work, winch designs for mobile skid units and for land based truck mounted applications.
Features:
High performance with a wide range of line pulling and line speeds Braided drum drive - 2 speed planetary gear box Slickline drum drive - single speed planetary gear box Direct mount 2 speed hydraulic motors Electric shift on 2 speed motors Electronic shift selector for 2 speed planetary Close-loop hydraulic system Machined balanced steel drum Band brakes with air operated controls HD drum shaft bearings Split or non split drum configurations Prepped, primed and painted Spooling system
Typical split drum design can hold Up to 7,100 M (23,000 ft) of 3/16 - 7/32 - 1/4 - 5/16 Cable or equivalent metric line sizes
Typical drum design can hold Up to 7,600 M (25,000 ft) of .092 - .108 - .125 Line or equivalent metric line sizes
Options:
Section 5
Section 5
The following series of wireline accessory equipment are base units where modifications or design changes can be made to better fit the wireline service applications.
Generators
GEN-100 SERIES
Generator Features:
Brushless AC generator Advanced automatic voltage regulator (AVR) control Easy paralleling with mains or other generators Standard 2/3 pitch windings avoid excessive neutral currents Dynamically balanced rotor Sealed-for-life ball bearings Standard features in 50 Hz or 60 Hz frequencies Standard features available in 120V or 240V power output Models range from 6 KW to 32 KW CE compliance Minimum maintenance system Five (5) rubber shock mounts
Hydraulic System:
Engineered hydraulic open loop circuit design Custom design hydraulic motor mount plate Direct mount hydraulic motor to generator rotor Variable displacement axial piston hydraulic motor Variable displacement axial piston pump with load sensing valve Oil cooler with automatic temperature sensing cooling fan
Dimensions:
Dimensions for a 10kw generator system with hydraulic motor and cooler 78 cm L x 50 cm W x 50 cm H (31 in L x 20 in W x 20 in H) Weight (Dry) 120 kg (265 lbs)
Accessories:
Shore power cord Grounding rod and cable LED frequency and volt meters
Section 5
The following series of wireline accessory equipment are base units where modifications or design changes can be made to better fit the wireline service applications.
Generators
PS1-100 SERIES
Features:
All steel skid structure with forklift pockets and lifting tubes for four point lifting 27 HP diesel engine Variable displacement pump with electronic joystick pump controller Operators control panel Frame assembly to handle large diameter spools Heavy duty hydraulic motor spool drive Shaft and drive adapter for steel spools Shaft and drive adapter for wood spools Mechanical disc brake with brake handle on control panel
Spool Sizes:
Spool frame assembly can handle spools of up to 36 diameter, wood or steel spools for line sizes 0.092 - 0.108 - 0.125 0.140 - 0.150 - 0.160
Accessories:
Operator's seat Remote auxiliary equipment hydraulic power supply Work lights
Skid Dimensions:
1.9m L x 1.35m W (75 in L x 52 in W)
Section 5
The following series of wireline accessory equipment are base units where modifications or design changes can be made to better fit the wireline service applications.
Generators
GS1-100 SERIES
Generator Features:
Steel skid frame with crash cage Two sets of forklift pockets, access from sides and ends Four point lifting lugs 14 HP diesel engine power pack 5,000 PSI rated hydraulic reciprocating grease pump Two grease tanks Operators stainless steel control panel 5,000 PSI manual hose reel with 125 ft x 1/2 HP hose 5,000 PSI manual hose reel with 125 ft x 1/2 return hose Tool storage compartment Minimum maintenance system Prepped, primed and painted
Hydraulic System:
Engineered hydraulic closed loop circuit design Variable displacement pump Pressure regulating valve Needle valves Pressure gauges
Dimensions:
1.4 m L x 1.0 m W x 1.0 m H (55 in L x 40 in W x 40 in H) Weight (Dry) 300 kg (650 lbs)
Section 5
The following series of wireline accessory equipment are base units where modifications or design changes can be made to better fit the wireline service applications.
Generators
DynaWinch manufactures a variety of aluminum Data and Service vans for various applications, which are custom designed to clients requirements. Van configurations available include, but are not limited to:
Section 5
The following series of wireline accessory equipment are base units where modifications or design changes can be made to better fit the wireline service applications.
Generators
DynaWinch manufactures a variety of aluminum Operator Control Cabs, which are custom designed for a variety of different applications and industries. Cab configurations include, but are not limited to: