8 Channel Redundant Field Interfacing Module used for interfacing PLC 2/4-wire Analog Input Device to field or field devices.
FEATURES: Elimination of single core wiring, connection through a pre-fab plug-in cable. Reduces the installation & commissioning time. FIM makes entire control system very reliable & robust. Provides ease trouble-shooting & maintenance. Compact in design. Universal Rail mounting.
General Data:
Dimensional/ Termination Data:
Environment/ Compliance Data:
No. of channels 8. Signal mode Redundant. Configuration 4-Wire. Field Input type Single-ended/ Differential type. Field Signal level 4-20mA. System Signal level 1-5V/0-10V DC. Channel Fuse rating 50mA. Fuse type 20mm Long glass fuse (Horizontal fuse base). Fuse-blown indication 3mm Red Led. Dimension (L W H) 160mm 126mm 90mm. Termination (Field side) Screw terminals -2.5 mm Conductor ( Phoenix make/ Weidmuller make/Equivalent make ) Termination (System side) 25 Pin D-sub male connector (O/E/N make). Mounting Universal rail. Ambient operating temp. -20C to +60C Relative humidity Max. 90% (Non-condensing). Tropicalisation Lacquer Coating on PCB Solder side. PCB design UL standard ANSI IPC D319 & MIL 275B. Screw- terminals UL, CSA Standard & CE standard TICHICA! ATA TICHICA! ATA TICHICA! ATA TICHICA! ATA FIELD INTERFACE MODULE www.ulepl.com UL08AI(RED)-D25 SPD ver1.0APR2012
Page 2 of 4
Transmitter Type Input Connection Remark Switch Position 4-Wire Between 1+ & 1- Transmitter supply external OFF IMISIOA! !AWIC IMISIOA! !AWIC IMISIOA! !AWIC IMISIOA! !AWIC 162mm 126mm FIELD INTERFACE MODULE www.ulepl.com UL08AI(RED)-D25 SPD ver1.0APR2012
Page 3 of 4
e 20x0.25 c b CN1 a 3 no.s ( each 2.25 inch long ) Transperant heat shrink sleeves XX Mtrs. d
# Various lengths as below: 1. Length a,d (heat shrink sleeve for the stripped length on D connector & fan out end): 10mm. 2. Length b,c (heat shrink sleeve for the insulated portion on D connector & fan out end): 40mm. 3. Length e (Stripped core length at the fan out end): 160mm.
To be used with the R.T.P.: UL08AI-D25. To be used with the module: Master logic ML-200R, 8 point AI 2MLF-AC8A. No. of cables & R.T.P.s per module: One cable & one R.T.P per module. Cable name: CBLD25MLFAC8AAI-XX. Conn. CN1 in cable: 25 pin D SUB female type. Connector make: O/E/N. Cable make: Concab/Equivalent Cable: 20 0.25 core non-shielded. Lugs: Fork type. Length: XX Mtr.s