Professional Documents
Culture Documents
MO Parameter ID Parameter Name NE MML Command Meaning UFRC WeakCovRrcRedirEcNoThs Ec/No threshold for RRC redirection in weak coverage BSC6900 SET UFRC The cell signal quality is indicated by the Ec/No reported by UEs in the cell. If the value of Ec/No is lower than the threshold, the cell signal quality is poor, and the UEs are redirected to the neighboring GSM cell when the "PERFENH_RRC_WEAK_REDIR_SWITCH" parameter in the "SET UCORRMPARA" command is set to ON. Actual Value = (GUI Value - 49(offset)) x 0.5. NO NO WRFD-02040003 Inter System Redirect Interval Type
GUI Value Range 0~49 Enumeration Number/Bit Unit Actual Value Range Default Value Recommended Value Initial Value Source Impact Parameter Relationship Access Not involved dB -24.5~0 13 13 Radio Planning (Internal planning) RNC None Read & Write
No (And no impact on the UE in idle mode) Service Interrupted After Modification Interruption Scope N/A Interruption Duration(Min) Caution Validation of Modification Impact on Radio Network Performance Introduced in Version Attribute N/A None The parameter modification has no impact on the equipment. None
PTTHsupaTti
MO Parameter ID Parameter Name NE MML Command Meaning IsKey Mandatory Feature ID Feature Name Value Type UFRC PTTHsupaTti PTT HSUPA TTI type BSC6900 SET UFRC TTI type used for the PTT services over the E-DCH. NO NO None None Enumeration Type
Number/Bit Unit Actual Value Range Default Value Recommended Value Initial Value Source Impact Parameter Relationship Access None EDCH_TTI_10ms, EDCH_TTI_2ms EDCH_TTI_2ms EDCH_TTI_2ms Radio Planning (Internal planning) RAB None Read & Write
No (And no impact on the UE in idle mode) Service Interrupted After Modification Interruption Scope N/A Interruption Duration(Min) Caution Validation of Modification Impact on Radio Network Performance Introduced in Version Attribute N/A None The parameter modification has no impact on the equipment. None
DefaultSPIWeight
MO UFRC
Parameter ID Parameter Name NE MML Command Meaning IsKey Mandatory Feature ID Feature Name Value Type
DefaultSPIWeight Default SPI Weight BSC6900 SET UFRC This parameter is used to specify SPI Weight when the licence for SPI Weight-based differentiated services is disabled. NO NO WRFD-020806 Differentiated Service Based on SPI Weight Interval Type
GUI Value Range 1~100 Enumeration Number/Bit Unit Actual Value Range Default Value Recommended Value Initial Value Source Impact Parameter Relationship Access Not involved % 0.01~1 100 100 Radio Planning (Internal planning) RNC None Read & Write
No (And no impact on the UE in idle mode) Service Interrupted After Modification Interruption Scope N/A Interruption Duration(Min) Caution N/A None